def fileListView_rightButtonClicked(self, item, pos, col):
popup = QPopupMenu(self)
popup.insertItem(QIconSet(load_pixmap('list_add', '16x16')),
self.__tr("Add File..."), self.addFile_clicked)
if item is not None:
popup.insertItem(QIconSet(load_pixmap('list_remove', '16x16')),
self.__tr("Remove File"), self.removeFile_clicked)
if self.fileListView.childCount() > 1:
last_item = self.fileListView.firstChild()
while last_item is not None and last_item.nextSibling():
last_item = last_item.nextSibling()
if item is not self.fileListView.firstChild():
popup.insertItem(QIconSet(load_pixmap('up', '16x16')),
self.__tr("Move Up"), self.moveFileUp_clicked)
if item is not last_item:
popup.insertItem(QIconSet(load_pixmap('down', '16x16')),
self.__tr("Move Down"), self.moveFileDown_clicked)
popup.insertSeparator(-1)
popup.insertItem(QIconSet(load_pixmap('mimetypes', '16x16')),
self.__tr("Show File Types..."), self.showFileTypes_clicked)
popup.popup(pos)
def __init__(self, cover_page_name='', preserve_formatting=False, parent=None, name=None, modal=0, fl=0):
CoverpageForm_base.__init__(self, parent, name, modal, fl)
self.preserve_formatting = preserve_formatting
self.preserveFormattingCheckBox.setChecked(preserve_formatting)
self.prevCoverpageButton.setPixmap(load_pixmap('prev', '16x16'))
self.nextCoverpageButton.setPixmap(load_pixmap('next', '16x16'))
self.coverpage_list = coverpages.COVERPAGES.keys()
if cover_page_name:
self.coverpage_index = self.coverpage_list.index(cover_page_name)
else:
self.coverpage_index = 0
self.setCoverpage()
def __init__(self, parent=None, name="",modal=0, fl=0,distro_type= 1,msg=""):
UpgradeForm_base.__init__(self, parent, name, modal, fl,distro_type, msg)
self.msg = msg
self.distro_type = distro_type
self.setIcon(load_pixmap('hp_logo', '128x128'))
self.initUi()
def addLoadPaper(self, paper_type=PAPER_TYPE_PLAIN):
self.addGroupHeading("load_paper", self.__tr("Load Paper"))
widget = self.getWidget()
layout1 = QGridLayout(widget, 1, 2, 5, 10,"layout1")
layout1.setColStretch(0, 1)
layout1.setColStretch(1, 10)
icon = QLabel(widget, "icon")
icon.setSizePolicy(QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed, 0, 0,
icon.sizePolicy().hasHeightForWidth()))
icon.setScaledContents(1)
layout1.addWidget(icon, 0, 0)
textLabel = QLabel(widget, "textLabel")
textLabel.setAlignment(QLabel.WordBreak)
textLabel.setSizePolicy(QSizePolicy(QSizePolicy.Expanding, QSizePolicy.Preferred, 0, 0,
textLabel.sizePolicy().hasHeightForWidth()))
textLabel.setFrameShape(self.frame_shape)
layout1.addWidget(textLabel, 0, 1)
spacer1 = QSpacerItem(20, 20, QSizePolicy.Expanding, QSizePolicy.Minimum)
layout1.addItem(spacer1, 0, 2)
if paper_type == PAPER_TYPE_PLAIN:
textLabel.setText(self.__tr("A page will be printed. Please load Letter/A4 <b>Plain Paper</b> into the printer."))
elif paper_type == PAPER_TYPE_HP_ADV_PHOTO:
textLabel.setText(self.__tr("A page will be printed. Please load Letter/A4 <b>HP Advanced Photo Paper - Glossy</b> into the printer."))
icon.setPixmap(load_pixmap("load_paper", 'other'))
self.addWidget(widget, "load_paper")
def __init__(self, parent=None, pixmap=None, disabled_pixmap=None, name='', subdir=None):
QPushButton.__init__(self, parent, name)
if subdir is None:
subdir = '16x16'
if type(pixmap) == type(''):
self.pixmap = load_pixmap(pixmap, subdir)
else:
self.pixmap = pixmap
if type(disabled_pixmap) == type(''):
self.disabled_pixmap = load_pixmap(disabled_pixmap, subdir)
else:
self.disabled_pixmap = disabled_pixmap
self.pixmap_width, self.pixmap_height = self.pixmap.width(), self.pixmap.height()
self.width_set = None
def __init__(self,parent = None,name = None,modal = 0,fl = 0):
FaxAddrBookForm_base.__init__(self,parent,name,modal,fl)
self.setIcon(load_pixmap('hp_logo', '128x128'))
global db
db = fax.FaxAddressBook()
self.init_problem = False
QTimer.singleShot(0, self.InitialUpdate)
def __init__(self,
cover_page_name='',
preserve_formatting=False,
parent=None,
name=None,
modal=0,
fl=0):
CoverpageForm_base.__init__(self, parent, name, modal, fl)
self.preserve_formatting = preserve_formatting
self.preserveFormattingCheckBox.setChecked(preserve_formatting)
self.prevCoverpageButton.setPixmap(load_pixmap('prev', '16x16'))
self.nextCoverpageButton.setPixmap(load_pixmap('next', '16x16'))
self.coverpage_list = coverpages.COVERPAGES.keys()
if cover_page_name:
self.coverpage_index = self.coverpage_list.index(cover_page_name)
else:
self.coverpage_index = 0
self.setCoverpage()
def __init__(self, pattern, align_type=ALIGN_TYPE_LBOW, parent = None, name = None, modal = 0, fl = 0):
Align10Form_Base.__init__(self,parent,name,modal,fl)
self.Icon.setPixmap(load_pixmap('align10'))
self.controls = maint.align10and11Controls(pattern, align_type)
for line in self.controls:
if not self.controls[line][0]:
eval('self.comboBox%s.setEnabled(False)' % line)
else:
for x in range(self.controls[line][1]):
eval('self.comboBox%s.insertItem("%s%d")' % (line, line, x+1))
def setCoverpage(self, inc=0):
self.coverpage_index += inc
if self.coverpage_index > len(self.coverpage_list) - 1:
self.coverpage_index = 0
elif self.coverpage_index < 0:
self.coverpage_index = len(self.coverpage_list) - 1
self.coverpage_name = self.coverpage_list[self.coverpage_index]
self.data = coverpages.COVERPAGES[self.coverpage_name]
self.coverpagePixmap.setPixmap(load_pixmap(self.data[1], 'other'))
def setCoverpage(self, inc=0):
self.coverpage_index += inc
if self.coverpage_index > len(self.coverpage_list) - 1:
self.coverpage_index = 0
elif self.coverpage_index < 0:
self.coverpage_index = len(self.coverpage_list) - 1
self.coverpage_name = self.coverpage_list[self.coverpage_index]
self.data = coverpages.COVERPAGES[self.coverpage_name]
self.coverpagePixmap.setPixmap(load_pixmap(self.data[1], 'other'))
def __init__(self,
parent=None,
name="",
modal=0,
fl=0,
distro_type=1,
msg=""):
UpgradeForm_base.__init__(self, parent, name, modal, fl, distro_type,
msg)
self.msg = msg
self.distro_type = distro_type
self.setIcon(load_pixmap('hp_logo', '128x128'))
self.initUi()
def __init__(self, args, read_pipe):
QApplication.__init__(self, args)
self.read_pipe = read_pipe
self.fmt = "80s80sI32sI80sf"
self.fmt_size = struct.calcsize(self.fmt)
self.tray_icon = SystrayIcon(load_pixmap("hp_logo", "32x32", (22, 22)))
self.menu = QPopupMenu()
title_item = TitleItem(load_pixmap('hp_logo', '16x16', (16, 16)),
"HP Status Service")
i = self.menu.insertItem(title_item)
self.menu.setItemEnabled(i, False)
self.menu.insertSeparator()
self.menu.insertItem(self.tr("HP Device Manager..."),
self.toolbox_triggered)
# TODO:
#icon2 = QIconSet(load_pixmap('settings', '16x16'))
#self.menu.insertItem(icon2, self.tr("Options..."), self.preferences_triggered)
self.menu.insertSeparator()
icon3 = QIconSet(load_pixmap('quit', '16x16'))
self.menu.insertItem(icon3, self.tr("Quit"), self.quit_triggered)
self.tray_icon.show()
notifier = QSocketNotifier(self.read_pipe, QSocketNotifier.Read)
QObject.connect(notifier, SIGNAL("activated(int)"),
self.notifier_activated)
QObject.connect(self.tray_icon,
PYSIGNAL("contextMenuRequested(const QPoint&)"),
self.menu_requested)
self.icon_info = load_pixmap('info', '16x16')
self.icon_warn = load_pixmap('warning', '16x16')
self.icon_error = load_pixmap('error', '16x16')
self.ERROR_STATE_TO_ICON = {
ERROR_STATE_CLEAR: self.icon_info,
ERROR_STATE_OK: self.icon_info,
ERROR_STATE_WARNING: self.icon_warn,
ERROR_STATE_ERROR: self.icon_error,
ERROR_STATE_LOW_SUPPLIES: self.icon_warn,
ERROR_STATE_BUSY: self.icon_warn,
ERROR_STATE_LOW_PAPER: self.icon_warn,
ERROR_STATE_PRINTING: self.icon_info,
ERROR_STATE_SCANNING: self.icon_info,
ERROR_STATE_PHOTOCARD: self.icon_info,
ERROR_STATE_FAXING: self.icon_info,
ERROR_STATE_COPYING: self.icon_info,
}
def __init__(self,
parent=None,
pixmap=None,
disabled_pixmap=None,
name='',
subdir=None):
QPushButton.__init__(self, parent, name)
if subdir is None:
subdir = '16x16'
if type(pixmap) == type(''):
self.pixmap = load_pixmap(pixmap, subdir)
else:
self.pixmap = pixmap
if type(disabled_pixmap) == type(''):
self.disabled_pixmap = load_pixmap(disabled_pixmap, subdir)
else:
self.disabled_pixmap = disabled_pixmap
self.pixmap_width, self.pixmap_height = self.pixmap.width(
), self.pixmap.height()
self.width_set = None
def __init__(self, msg_icon, title, msg, tray_icon):
QDialog.__init__(
self, tray_icon, "BalloonTip", False,
Qt.WStyle_StaysOnTop | Qt.WStyle_Customize | Qt.WStyle_NoBorder
| Qt.WStyle_Tool | Qt.WX11BypassWM)
self.timerId = None
self.bubbleActive = False
QObject.connect(tray_icon, SIGNAL("destroyed()"), self.close)
self.titleLabel = QLabel(self)
self.titleLabel.installEventFilter(self)
self.titleLabel.setText(title)
f = self.titleLabel.font()
f.setBold(True)
self.titleLabel.setFont(f)
self.titleLabel.setTextFormat(
Qt.PlainText) # to maintain compat with windows
self.closeButton = QPushButton(self)
self.closeButton.setPixmap(load_pixmap('close', '16x16'))
self.closeButton.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
self.closeButton.setFixedSize(18, 18)
QObject.connect(self.closeButton, SIGNAL("clicked()"), self.close)
self.msgLabel = QLabel(self)
self.msgLabel.installEventFilter(self)
self.msgLabel.setText(msg)
self.msgLabel.setTextFormat(Qt.PlainText)
self.msgLabel.setAlignment(Qt.AlignTop | Qt.AlignLeft)
layout = QGridLayout(self)
if msg_icon is not None:
self.iconLabel = QLabel(self)
self.iconLabel.setPixmap(msg_icon)
self.iconLabel.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
self.iconLabel.setMargin(2)
layout.addWidget(self.iconLabel, 0, 0)
layout.addWidget(self.titleLabel, 0, 1)
else:
layout.addMultiCellWidget(self.titleLabel, 0, 1, 0, 2)
layout.addWidget(self.closeButton, 0, 3)
layout.addMultiCellWidget(self.msgLabel, 1, 1, 0, 3)
layout.setMargin(3)
self.setPaletteBackgroundColor(QColor(255, 255, 224))
def __init__(self, args, read_pipe):
QApplication.__init__(self, args)
self.read_pipe = read_pipe
self.fmt = "80s80sI32sI80sf"
self.fmt_size = struct.calcsize(self.fmt)
self.tray_icon = SystrayIcon(load_pixmap("hp_logo", "32x32", (22, 22)))
self.menu = QPopupMenu()
title_item = TitleItem(load_pixmap('hp_logo', '16x16', (16, 16)), "HP Status Service")
i = self.menu.insertItem(title_item)
self.menu.setItemEnabled(i, False)
self.menu.insertSeparator()
self.menu.insertItem(self.tr("HP Device Manager..."), self.toolbox_triggered)
# TODO:
#icon2 = QIconSet(load_pixmap('settings', '16x16'))
#self.menu.insertItem(icon2, self.tr("Options..."), self.preferences_triggered)
self.menu.insertSeparator()
icon3 = QIconSet(load_pixmap('quit', '16x16'))
self.menu.insertItem(icon3, self.tr("Quit"), self.quit_triggered)
self.tray_icon.show()
notifier = QSocketNotifier(self.read_pipe, QSocketNotifier.Read)
QObject.connect(notifier, SIGNAL("activated(int)"), self.notifier_activated)
QObject.connect(self.tray_icon, PYSIGNAL("contextMenuRequested(const QPoint&)"), self.menu_requested)
self.icon_info = load_pixmap('info', '16x16')
self.icon_warn = load_pixmap('warning', '16x16')
self.icon_error = load_pixmap('error', '16x16')
self.ERROR_STATE_TO_ICON = {
ERROR_STATE_CLEAR: self.icon_info,
ERROR_STATE_OK: self.icon_info,
ERROR_STATE_WARNING: self.icon_warn,
ERROR_STATE_ERROR: self.icon_error,
ERROR_STATE_LOW_SUPPLIES: self.icon_warn,
ERROR_STATE_BUSY: self.icon_warn,
ERROR_STATE_LOW_PAPER: self.icon_warn,
ERROR_STATE_PRINTING: self.icon_info,
ERROR_STATE_SCANNING: self.icon_info,
ERROR_STATE_PHOTOCARD: self.icon_info,
ERROR_STATE_FAXING: self.icon_info,
ERROR_STATE_COPYING: self.icon_info,
}
def __init__(self, msg_icon, title, msg, tray_icon):
QDialog.__init__(self, tray_icon, "BalloonTip", False,
Qt.WStyle_StaysOnTop | Qt.WStyle_Customize | Qt.WStyle_NoBorder | Qt.WStyle_Tool | Qt.WX11BypassWM)
self.timerId = None
self.bubbleActive = False
QObject.connect(tray_icon, SIGNAL("destroyed()"), self.close)
self.titleLabel = QLabel(self)
self.titleLabel.installEventFilter(self)
self.titleLabel.setText(title)
f = self.titleLabel.font()
f.setBold(True)
self.titleLabel.setFont(f)
self.titleLabel.setTextFormat(Qt.PlainText) # to maintain compat with windows
self.closeButton = QPushButton(self)
self.closeButton.setPixmap(load_pixmap('close', '16x16'))
self.closeButton.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
self.closeButton.setFixedSize(18, 18)
QObject.connect(self.closeButton, SIGNAL("clicked()"), self.close)
self.msgLabel = QLabel(self)
self.msgLabel.installEventFilter(self)
self.msgLabel.setText(msg)
self.msgLabel.setTextFormat(Qt.PlainText)
self.msgLabel.setAlignment(Qt.AlignTop | Qt.AlignLeft)
layout = QGridLayout(self)
if msg_icon is not None:
self.iconLabel = QLabel(self)
self.iconLabel.setPixmap(msg_icon)
self.iconLabel.setSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
self.iconLabel.setMargin(2)
layout.addWidget(self.iconLabel, 0, 0)
layout.addWidget(self.titleLabel, 0, 1)
else:
layout.addMultiCellWidget(self.titleLabel, 0, 1, 0, 2)
layout.addWidget(self.closeButton, 0, 3)
layout.addMultiCellWidget(self.msgLabel, 1, 1, 0, 3)
layout.setMargin(3)
self.setPaletteBackgroundColor(QColor(255, 255, 224))
def __init__(self,
pattern,
align_type=ALIGN_TYPE_LBOW,
parent=None,
name=None,
modal=0,
fl=0):
Align10Form_Base.__init__(self, parent, name, modal, fl)
self.Icon.setPixmap(load_pixmap('align10'))
self.controls = maint.align10and11and14Controls(pattern, align_type)
for line in self.controls:
if not self.controls[line][0]:
eval('self.comboBox%s.setEnabled(False)' % line)
else:
for x in range(self.controls[line][1]):
eval('self.comboBox%s.insertItem("%s%d")' %
(line, line, x + 1))
def addLoadPaper(self, paper_type=PAPER_TYPE_PLAIN):
self.addGroupHeading("load_paper", self.__tr("Load Paper"))
widget = self.getWidget()
layout1 = QGridLayout(widget, 1, 2, 5, 10, "layout1")
layout1.setColStretch(0, 1)
layout1.setColStretch(1, 10)
icon = QLabel(widget, "icon")
icon.setSizePolicy(
QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed, 0, 0,
icon.sizePolicy().hasHeightForWidth()))
icon.setScaledContents(1)
layout1.addWidget(icon, 0, 0)
textLabel = QLabel(widget, "textLabel")
textLabel.setAlignment(QLabel.WordBreak)
textLabel.setSizePolicy(
QSizePolicy(QSizePolicy.Expanding, QSizePolicy.Preferred, 0, 0,
textLabel.sizePolicy().hasHeightForWidth()))
textLabel.setFrameShape(self.frame_shape)
layout1.addWidget(textLabel, 0, 1)
spacer1 = QSpacerItem(20, 20, QSizePolicy.Expanding,
QSizePolicy.Minimum)
layout1.addItem(spacer1, 0, 2)
if paper_type == PAPER_TYPE_PLAIN:
textLabel.setText(
self.__tr(
"A page will be printed. Please load Letter/A4 <b>Plain Paper</b> into the printer."
))
elif paper_type == PAPER_TYPE_HP_ADV_PHOTO:
textLabel.setText(
self.__tr(
"A page will be printed. Please load Letter/A4 <b>HP Advanced Photo Paper - Glossy</b> into the printer."
))
icon.setPixmap(load_pixmap("load_paper", 'other'))
self.addWidget(widget, "load_paper")
def __init__(self, parent, dev, cleaning_level, name=None, modal=0, fl=0):
CleaningForm_base.__init__(self, parent, name, modal, fl)
self.dev = dev
text = unicode(self.CleaningText.text())
self.CleaningText.setText(text % str(cleaning_level + 1))
text = unicode(self.Continue.text())
self.Continue.setText(text % str(cleaning_level + 1))
text = unicode(self.CleaningTitle.text())
self.CleaningTitle.setText(text % str(cleaning_level))
self.Icon.setPixmap(load_pixmap('clean.png', 'other'))
self.check_timer = QTimer(self, "CheckTimer")
self.connect(self.check_timer, SIGNAL('timeout()'), self.CheckTimerTimeout)
self.check_timer.start(3000)
def __init__(self, parent, dev, cleaning_level, name=None, modal=0, fl=0):
CleaningForm_base.__init__(self, parent, name, modal, fl)
self.dev = dev
text = unicode(self.CleaningText.text())
self.CleaningText.setText(text % str(cleaning_level + 1))
text = unicode(self.Continue.text())
self.Continue.setText(text % str(cleaning_level + 1))
text = unicode(self.CleaningTitle.text())
self.CleaningTitle.setText(text % str(cleaning_level))
self.Icon.setPixmap(load_pixmap('clean.png', 'other'))
self.check_timer = QTimer(self, "CheckTimer")
self.connect(self.check_timer, SIGNAL('timeout()'),
self.CheckTimerTimeout)
self.check_timer.start(3000)
def __init__(self, bus, param, jd_port=1, parent=None, name=None, modal=0, fl=0):
SetupForm_base.__init__(self, parent, name, modal, fl)
self.start_page = self.ConnectionPage
self.first_page = True
if bus is None:
self.bus = 'usb'
else:
self.bus = bus[0]
self.start_page = self.ProbedDevicesPage
if not prop.par_build:
self.parRadioButton.setEnabled(False)
if not prop.net_build:
self.netRadioButton.setEnabled(False)
if not prop.par_build and not prop.net_build:
self.bus = 'usb'
self.start_page = self.ProbedDevicesPage
self.param = param
self.jd_port = jd_port
if self.param:
# Validate param...
device_uri, sane_uri, fax_uri = device.makeURI(self.param, self.jd_port)
if device_uri:
self.device_uri = device_uri
self.start_page = self.PPDPage
else:
self.FailureUI(self.__tr("<b>Device not found.</b> <p>Please make sure your printer is properly connected and powered-on."))
self.setIcon(load_pixmap('hp_logo', '128x128'))
self.connectionTypeButtonGroup.setButton(0)
self.device_uri = ''
self.mq = {}
self.prev_page = None
self.probe_pat = re.compile(r'(.*?)\s"(.*?)"\s"(.*?)"\s"(.*?)"', re.IGNORECASE)
self.printer_name = ''
self.ppd_list = []
self.location = ''
self.desc = ''
self.filter = []
self.search = ''
self.ttl = 4
self.timeout = 5
self.printer_name_ok = True
self.fax_name_ok = True
self.fax_number = ''
self.fax_name = ''
self.printer_fax_names_same = False
self.fax_name_company = ''
self.fax_location = ''
self.fax_desc = ''
self.print_test_page = True
self.printerNameLineEdit.setValidator(PrinterNameValidator(self.printerNameLineEdit))
self.faxNameLineEdit.setValidator(PrinterNameValidator(self.faxNameLineEdit))
self.faxNumberLineEdit.setValidator(PhoneNumValidator(self.faxNumberLineEdit))
self.setTitleFont(QFont("Helvetica", 16))
self.setBackEnabled(self.FinishedPage, False)
self.bg = self.printerNameLineEdit.paletteBackgroundColor()
self.setHelpEnabled(self.ConnectionPage, False)
self.setHelpEnabled(self.ProbedDevicesPage, False)
self.setHelpEnabled(self.PPDPage, False)
self.setHelpEnabled(self.PrinterNamePage, False)
self.setHelpEnabled(self.FinishedPage, False)
self.faxNameLineEdit.setMaxLength(50)
self.printerNameLineEdit.setMaxLength(50)
QToolTip.add(self.searchFiltersPushButton2,
self.__tr('Current: Filter: [%2] Search: "%3" TTL: %4 Timeout: %5s').arg(','.join(self.filter)).arg(self.search or '').arg(self.ttl).arg(self.timeout))
cups.setPasswordCallback(showPasswordUI)
def __init__(self, bus=['usb', 'par'], device_uri=None, printer_name=None,
parent=None, name=None, fl=0):
QMainWindow.__init__(self,parent,name,fl)
self.pc = None
self.device_uri = device_uri
self.printer_name = printer_name
self.init_failed = False
self.setIcon(load_pixmap('hp_logo', '128x128'))
self.setCentralWidget(QWidget(self,"qt_central_widget"))
self.FormLayout = QGridLayout(self.centralWidget(),1,1,11,6,"FormLayout")
self.languageChange()
self.resize(QSize(600,480).expandedTo(self.minimumSizeHint()))
self.clearWState(Qt.WState_Polished)
if self.device_uri and self.printer_name:
log.error("You may not specify both a printer (-p) and a device (-d).")
self.device_uri, self.printer_name = None, None
if not self.device_uri and not self.printer_name:
probed_devices = device.probeDevices(bus=bus, filter={'pcard-type': (operator.eq, 1)})
cups_printers = cups.getPrinters()
log.debug(probed_devices)
log.debug(cups_printers)
max_deviceid_size, x, devices = 0, 0, {}
for d in probed_devices:
if d.startswith('hp:'):
printers = []
for p in cups_printers:
if p.device_uri == d:
printers.append(p.name)
devices[x] = (d, printers)
x += 1
max_deviceid_size = max(len(d), max_deviceid_size)
if x == 0:
from nodevicesform import NoDevicesForm
self.FailureUI(self.__tr("<p><b>No devices found that support photo card access.</b><p>Please make sure your device is properly installed and try again."))
self.init_failed = True
elif x == 1:
log.info(log.bold("Using device: %s" % devices[0][0]))
self.device_uri = devices[0][0]
else:
from choosedevicedlg import ChooseDeviceDlg
dlg = ChooseDeviceDlg(devices)
if dlg.exec_loop() == QDialog.Accepted:
self.device_uri = dlg.device_uri
else:
self.init_failed = True
self.dbus_avail, self.service, session_bus = device.init_dbus()
self.UnloadView = ScrollUnloadView(self.service,
self.centralWidget(), self, "UnloadView")
self.FormLayout.addWidget(self.UnloadView,0,0)
if not self.init_failed:
try:
self.cur_device = device.Device(device_uri=self.device_uri,
printer_name=self.printer_name)
except Error, e:
log.error("Invalid device URI or printer name.")
self.FailureUI("<b>Invalid device URI or printer name.</b><p>Please check the parameters to hp-print and try again.")
self.init_failed = True
else:
self.device_uri = self.cur_device.device_uri
user_conf.set('last_used', 'device_uri', self.device_uri)
log.debug(self.device_uri)
self.statusBar().message(self.device_uri)
def __init__(self, parent=None, name=None, modal=0, fl=0):
ColorCalForm2_base.__init__(self, parent, name, modal, fl)
self.Icon.setPixmap(load_pixmap('color_adj', 'other'))
self.value = 1
def __init__(self, bus, param, jd_port=1, parent=None, name=None, modal=0, fl=0):
SetupForm_base.__init__(self, parent, name, modal, fl)
self.start_page = self.ConnectionPage
self.first_page = True
if bus is None:
self.bus = 'usb'
else:
self.bus = bus[0]
self.start_page = self.ProbedDevicesPage
if not prop.par_build:
self.parRadioButton.setEnabled(False)
if not prop.net_build:
self.netRadioButton.setEnabled(False)
if not prop.par_build and not prop.net_build:
self.bus = 'usb'
self.start_page = self.ProbedDevicesPage
self.param = param
self.jd_port = jd_port
if self.param:
# Validate param...
device_uri, sane_uri, fax_uri = device.makeURI(self.param, self.jd_port)
if device_uri:
self.device_uri = device_uri
self.start_page = self.PPDPage
else:
self.FailureUI(self.__tr("<b>Device not found.</b> <p>Please make sure your printer is properly connected and powered-on."))
self.setIcon(load_pixmap('hp_logo', '128x128'))
self.connectionTypeButtonGroup.setButton(0)
self.device_uri = ''
self.mq = {}
self.prev_page = None
self.probe_pat = re.compile(r'(.*?)\s"(.*?)"\s"(.*?)"\s"(.*?)"', re.IGNORECASE)
self.printer_name = ''
self.ppd_list = []
self.location = ''
self.desc = ''
self.filter = []
self.search = ''
self.ttl = 4
self.timeout = 5
self.printer_name_ok = True
self.fax_name_ok = True
self.fax_number = ''
self.fax_name = ''
self.printer_fax_names_same = False
self.fax_name_company = ''
self.fax_location = ''
self.fax_desc = ''
self.print_test_page = True
self.printerNameLineEdit.setValidator(PrinterNameValidator(self.printerNameLineEdit))
self.faxNameLineEdit.setValidator(PrinterNameValidator(self.faxNameLineEdit))
self.faxNumberLineEdit.setValidator(PhoneNumValidator(self.faxNumberLineEdit))
self.setTitleFont(QFont("Helvetica", 16))
self.setBackEnabled(self.FinishedPage, False)
self.bg = self.printerNameLineEdit.paletteBackgroundColor()
self.setHelpEnabled(self.ConnectionPage, False)
self.setHelpEnabled(self.ProbedDevicesPage, False)
self.setHelpEnabled(self.PPDPage, False)
self.setHelpEnabled(self.PrinterNamePage, False)
self.setHelpEnabled(self.FinishedPage, False)
self.faxNameLineEdit.setMaxLength(50)
self.printerNameLineEdit.setMaxLength(50)
QToolTip.add(self.searchFiltersPushButton2,
self.__tr('Current: Filter: [%2] Search: "%3" TTL: %4 Timeout: %5s').arg(','.join(self.filter)).arg(self.search or '').arg(self.ttl).arg(self.timeout))
cups.setPasswordCallback(showPasswordUI)
def __init__(self, parent=None, name=None, modal=0, fl=0):
CleaningForm2_base.__init__(self, parent, name, modal, fl)
self.Icon.setPixmap(load_pixmap('clean', 'other'))
def __init__(self, printer_name=None, args=None,
parent=None,name=None,modal=0,fl=0):
QMainWindow.__init__(self,parent,name,fl)
self.printer_name = printer_name
self.file_list = []
self.args = args
self.init_failed = False
self.statusBar()
self.setIcon(load_pixmap('hp_logo', '128x128'))
signal.signal(signal.SIGINT, signal.SIG_DFL)
if not name:
self.setName("PrinterForm")
self.setCentralWidget(QWidget(self,"qt_central_widget"))
self.FormLayout = QGridLayout(self.centralWidget(),1,1,11,6,"FormLayout")
self.resize(QSize(600,480).expandedTo(self.minimumSizeHint()))
self.clearWState(Qt.WState_Polished)
self.languageChange()
self.cups_printers = device.getSupportedCUPSPrinters()
log.debug(self.cups_printers)
if not self.printer_name: # no -p provided
t = device.probeDevices(['cups'])
probed_devices = []
for d in t:
if d.startswith('hp:'):
probed_devices.append(d)
log.debug(probed_devices)
max_deviceid_size, x, devices = 0, 0, {}
for d in probed_devices:
printers = []
for p in self.cups_printers:
if p.device_uri == d:
printers.append(p.name)
devices[x] = (d, printers)
x += 1
max_deviceid_size = max(len(d), max_deviceid_size)
if x == 0:
from nodevicesform import NoDevicesForm
self.FailureUI(self.__tr("<p><b>No devices found.</b><p>Please make sure your device is properly installed and try again."))
self.init_failed = True
elif x == 1:
log.info(log.bold("Using device: %s" % devices[0][0]))
self.device_uri = devices[0][0]
else:
from chooseprinterdlg import ChoosePrinterDlg
dlg = ChoosePrinterDlg(self.cups_printers)
if dlg.exec_loop() == QDialog.Accepted:
self.printer_name = dlg.printer_name
self.device_uri = dlg.device_uri
else:
self.init_failed = True
else: # -p provided
for p in self.cups_printers:
if p.name == self.printer_name:
self.device_uri = p.device_uri
break
else:
self.FailureUI("<b>Invalid printer name.</b><p>Please check the parameters to hp-print and try again.")
self.init_failed = True
if not self.init_failed:
self.PrintView = ScrollPrintView(None, self.centralWidget(), self, "PrintView")
self.FormLayout.addWidget(self.PrintView,0,0)
try:
self.cur_device = device.Device(device_uri=self.device_uri,
printer_name=self.printer_name)
except Error, e:
log.error("Invalid device URI or printer name.")
self.FailureUI("<b>Invalid device URI or printer name.</b><p>Please check the parameters to hp-print and try again.")
self.init_failed = True
else:
self.device_uri = self.cur_device.device_uri
user_conf.set('last_used', 'device_uri', self.device_uri)
log.debug(self.device_uri)
self.statusBar().message(self.device_uri)
def __init__(self,parent = None,name = None,modal = 0,fl = 0):
NoDevicesForm_base.__init__(self, parent, name, modal, fl)
self.Icon.setPixmap(load_pixmap("warning.png", '32x32'))
def __init__(self,
device_uri,
printer_name,
args,
parent=None,
name=None,
modal=0,
fl=0):
QMainWindow.__init__(self, parent, name, fl)
self.setIcon(load_pixmap('hp_logo', '128x128'))
self.init_failed = False
self.device_uri = device_uri
self.dev = None
self.printer_name = printer_name
bus = ['cups']
self.filename = ''
self.username = prop.username
self.args = args
self.setCentralWidget(QWidget(self, "qt_central_widget"))
self.FormLayout = QGridLayout(self.centralWidget(), 1, 1, 11, 6,
"FormLayout")
self.resize(QSize(600, 480).expandedTo(self.minimumSizeHint()))
self.clearWState(Qt.WState_Polished)
self.languageChange()
# if self.device_uri and self.printer_name:
# log.error("You may not specify both a printer (-p) and a device (-d).")
# self.FailureUI(self.__tr("<p><b>You may not specify both a printer (-p) and a device (-d)."))
# self.device_uri, self.printer_name = None, None
# self.init_failed = True
self.cups_printers = cups.getPrinters()
log.debug(self.cups_printers)
if self.printer_name:
found = False
for p in self.cups_printers:
if p.name == printer_name:
self.device_uri = p.device_uri
found = True
break
if not found:
self.FailureUI(
self.__tr(
"<b>Unknown printer name: %1</b><p>Please check the printer name and try again."
).arg(self.printer_name))
if found and not p.device_uri.startswith('hpfax:/'):
self.FailureUI(
self.__tr(
"You must specify a printer that has a device URI in the form 'hpfax:/...'"
))
self.init_failed = True
if not self.device_uri and not self.printer_name:
t = device.probeDevices(
bus=bus, filter={'fax-type': (operator.gt, FAX_TYPE_NONE)})
#print t
probed_devices = []
for d in t:
probed_devices.append(d.replace('hp:/', 'hpfax:/'))
#print probed_devices
probed_devices = utils.uniqueList(probed_devices)
log.debug(probed_devices)
max_deviceid_size, x, devices = 0, 0, {}
for d in probed_devices:
printers = []
for p in self.cups_printers:
#print p.device_uri, d
if p.device_uri == d:
#print "OK"
printers.append(p.name)
devices[x] = (d, printers)
x += 1
max_deviceid_size = max(len(d), max_deviceid_size)
x = len(devices)
#print devices
if x == 0:
from nodevicesform import NoDevicesForm
self.FailureUI(
self.__tr(
"<p><b>No devices found.</b><p>Please make sure your device is properly installed and try again."
))
self.init_failed = True
elif x == 1:
log.info(log.bold("Using device: %s" % devices[0][0]))
self.device_uri = devices[0][0]
else:
from chooseprinterdlg import ChoosePrinterDlg
dlg = ChoosePrinterDlg(self.cups_printers, ['hpfax'])
if dlg.exec_loop() == QDialog.Accepted:
self.device_uri = dlg.device_uri
else:
self.init_failed = True
self.dbus_avail, self.service, session_bus = device.init_dbus()
self.FaxView = ScrollFaxView(self.service, self.centralWidget(), self)
self.FormLayout.addWidget(self.FaxView, 0, 0)
if not self.init_failed:
if not self.device_uri or not self.device_uri.startswith("hpfax:"):
log.error("Invalid device URI: %s" % repr(device_uri))
self.FailureUI(
self.__tr(
"<b>Invalid device URI %1.</b><p>Please check the parameters to hp-print and try again."
).arg(repr(device_uri)))
self.init_failed = True
else:
try:
self.cur_device = device.Device(
device_uri=self.device_uri,
printer_name=self.printer_name)
except Error, e:
log.error("Invalid device URI or printer name.")
self.FailureUI(
"<b>Invalid device URI or printer name.</b><p>Please check the parameters to hp-print and try again."
)
self.init_failed = True
else:
self.device_uri = self.cur_device.device_uri
user_conf.set('last_used', 'device_uri', self.device_uri)
log.debug(self.device_uri)
self.statusBar().message(self.device_uri)
def __init__(self,parent = None,name = None,modal = 0,fl = 0):
ColorCalForm2_base.__init__(self,parent,name,modal,fl)
self.Icon.setPixmap(load_pixmap('color_adj', 'other'))
self.value = 1
def __init__(self, parent, line, name = None, modal = 0, fl = 0):
ColorAdjForm_base.__init__(self,parent,name,modal,fl)
self.Icon.setPixmap(load_pixmap('color_adj'))
self.LineLabel.setText("""<b><font size="+1">%s</font></b>""" % line)
self.value = 11
def __init__(self, device_uri, printer_name, args,
parent=None, name=None,
modal=0, fl=0):
QMainWindow.__init__(self,parent,name,fl)
self.setIcon(load_pixmap('hp_logo', '128x128'))
self.init_failed = False
self.device_uri = device_uri
self.dev = None
self.printer_name = printer_name
bus = ['cups']
self.filename = ''
self.username = prop.username
self.args = args
self.setCentralWidget(QWidget(self,"qt_central_widget"))
self.FormLayout = QGridLayout(self.centralWidget(),1,1,11,6,"FormLayout")
self.resize(QSize(600,480).expandedTo(self.minimumSizeHint()))
self.clearWState(Qt.WState_Polished)
self.languageChange()
# if self.device_uri and self.printer_name:
# log.error("You may not specify both a printer (-p) and a device (-d).")
# self.FailureUI(self.__tr("<p><b>You may not specify both a printer (-p) and a device (-d)."))
# self.device_uri, self.printer_name = None, None
# self.init_failed = True
self.cups_printers = cups.getPrinters()
log.debug(self.cups_printers)
if self.printer_name:
found = False
for p in self.cups_printers:
if p.name == printer_name:
self.device_uri = p.device_uri
found = True
break
if not found:
self.FailureUI(self.__tr("<b>Unknown printer name: %1</b><p>Please check the printer name and try again.").arg(self.printer_name))
if found and not p.device_uri.startswith('hpfax:/'):
self.FailureUI(self.__tr("You must specify a printer that has a device URI in the form 'hpfax:/...'"))
self.init_failed = True
if not self.device_uri and not self.printer_name:
t = device.probeDevices(bus=bus, filter={'fax-type':(operator.gt, FAX_TYPE_NONE)})
#print t
probed_devices = []
for d in t:
probed_devices.append(d.replace('hp:/', 'hpfax:/'))
#print probed_devices
probed_devices = utils.uniqueList(probed_devices)
log.debug(probed_devices)
max_deviceid_size, x, devices = 0, 0, {}
for d in probed_devices:
printers = []
for p in self.cups_printers:
#print p.device_uri, d
if p.device_uri == d:
#print "OK"
printers.append(p.name)
devices[x] = (d, printers)
x += 1
max_deviceid_size = max(len(d), max_deviceid_size)
x = len(devices)
#print devices
if x == 0:
from nodevicesform import NoDevicesForm
self.FailureUI(self.__tr("<p><b>No devices found.</b><p>Please make sure your device is properly installed and try again."))
self.init_failed = True
elif x == 1:
log.info(log.bold("Using device: %s" % devices[0][0]))
self.device_uri = devices[0][0]
else:
from chooseprinterdlg import ChoosePrinterDlg
dlg = ChoosePrinterDlg(self.cups_printers, ['hpfax'])
if dlg.exec_loop() == QDialog.Accepted:
self.device_uri = dlg.device_uri
else:
self.init_failed = True
self.dbus_avail, self.service, session_bus = device.init_dbus()
self.FaxView = ScrollFaxView(self.service, self.centralWidget(), self)
self.FormLayout.addWidget(self.FaxView,0,0)
if not self.init_failed:
if not self.device_uri or not self.device_uri.startswith("hpfax:"):
log.error("Invalid device URI: %s" % repr(device_uri))
self.FailureUI(self.__tr("<b>Invalid device URI %1.</b><p>Please check the parameters to hp-print and try again.").arg(repr(device_uri)));
self.init_failed = True
else:
try:
self.cur_device = device.Device(device_uri=self.device_uri,
printer_name=self.printer_name)
except Error, e:
log.error("Invalid device URI or printer name.")
self.FailureUI("<b>Invalid device URI or printer name.</b><p>Please check the parameters to hp-print and try again.")
self.init_failed = True
else:
self.device_uri = self.cur_device.device_uri
user_conf.set('last_used', 'device_uri', self.device_uri)
log.debug(self.device_uri)
self.statusBar().message(self.device_uri)
def __init__(self, parent=None, name=None, modal=0, fl=0):
NoDevicesForm_base.__init__(self, parent, name, modal, fl)
self.Icon.setPixmap(load_pixmap("warning.png", '32x32'))
def __init__(self,parent = None,name = None,modal = 0,fl = 0):
AboutDlg_base.__init__(self,parent,name,modal,fl)
self.pyPixmap.setPixmap(load_pixmap('powered_by_python.png'))
self.osiPixmap.setPixmap(load_pixmap('opensource-75x65.png'))
self.logoPixmap.setPixmap(load_pixmap('hp-tux-printer.png'))
def __init__(self,parent = None,name = None,modal = 0,fl = 0):
CleaningForm2_base.__init__(self,parent,name,modal,fl)
self.Icon.setPixmap(load_pixmap('clean', 'other'))
def __init__(self, parent, line_id, orientation, colors, line_count,
choice_count, name = None, modal = 0, fl = 0):
QDialog.__init__(self, parent, name, modal, fl)
# line_id: 'A', 'B', etc.
# orientation: 'v' or 'h'
# colors: 'k' or 'c' or 'kc'
# line_count: 2 or 3
# choice_count: 5, 7, 9, 11, etc. (odd)
mid_point = (choice_count+1)/2
if not name:
self.setProperty("name", QVariant("AlignForm"))
AlignFormLayout = QGridLayout(self,1,1,11,6,"AlignFormLayout")
#self.helpButton = QPushButton(self,"helpButton")
#AlignFormLayout.addWidget(self.helpButton,1,0)
self.CancelButton = QPushButton(self,"CancelButton")
AlignFormLayout.addWidget(self.CancelButton,1,2)
self.ContinueButton = QPushButton(self,"ContinueButton")
AlignFormLayout.addWidget(self.ContinueButton,1,3)
spacer1 = QSpacerItem(270,20,QSizePolicy.Expanding,QSizePolicy.Minimum)
AlignFormLayout.addItem(spacer1,1,1)
self.buttonGroup = QButtonGroup(self,"buttonGroup")
self.buttonGroup.setColumnLayout(0,Qt.Vertical)
self.buttonGroup.layout().setSpacing(6)
self.buttonGroup.layout().setMargin(11)
buttonGroupLayout = QGridLayout(self.buttonGroup.layout())
buttonGroupLayout.setAlignment(Qt.AlignTop)
ChoiceLayout = QHBoxLayout(None,0,6,"ChoiceLayout")
for x in range(1, choice_count+1):
exec 'self.radioButton%d = QRadioButton( self.buttonGroup, "radioButton%d" )' % (x, x)
exec 'self.radioButton%d.setText( "%s%d" )' % (x, line_id, x)
if x == mid_point:
exec 'self.radioButton%d.setChecked( 1 )' % x
exec 'ChoiceLayout.addWidget( self.radioButton%d )' % x
buttonGroupLayout.addMultiCellLayout(ChoiceLayout, 1, 1, 0, 1)
self.Icon = QLabel(self.buttonGroup,"Icon")
self.Icon.setProperty("sizePolicy",QVariant(QSizePolicy(QSizePolicy.Fixed,QSizePolicy.Fixed,0,0,self.Icon.sizePolicy().hasHeightForWidth())))
self.Icon.setProperty("scaledContents",QVariant(QVariant(1,0)))
buttonGroupLayout.addWidget(self.Icon,0,0)
self.textLabel2_2 = QLabel(self.buttonGroup,"textLabel2_2")
self.textLabel2_2.setProperty("alignment",QVariant(QLabel.WordBreak | QLabel.AlignVCenter))
buttonGroupLayout.addWidget(self.textLabel2_2,0,1)
AlignFormLayout.addMultiCellWidget(self.buttonGroup,0,0,0,3)
self.languageChange()
self.resize(QSize(608,222).expandedTo(self.minimumSizeHint()))
self.clearWState(Qt.WState_Polished)
self.connect(self.CancelButton,SIGNAL("clicked()"),self,SLOT("reject()"))
self.connect(self.ContinueButton,SIGNAL("clicked()"),self,SLOT("accept()"))
self.connect(self.buttonGroup,SIGNAL("clicked(int)"),self.buttonGroup_clicked)
self.Icon.setPixmap(load_pixmap('%s-%s-%d.png' % (orientation, colors, line_count), 'other'))
self.buttonGroup.setTitle(line_id)
self.value = (choice_count + 1) / 2
def __init__(self, parent=None, name=None, modal=0, fl=0):
ColorCal4Form_base.__init__(self, parent, name, modal, fl)
self.gray_plot_png.setPixmap(load_pixmap('type4_gray_patch', 'other'))
self.color_plot_png.setPixmap(load_pixmap('type4_color_patch', 'other'))
self.values = [0, 0, 0, 0]
def __init__(self,
bus='cups',
device_uri=None,
printer_name=None,
num_copies=None,
contrast=None,
quality=None,
reduction=None,
fit_to_page=None,
parent=None,
name=None,
modal=0,
fl=0):
QMainWindow.__init__(self, parent, name, fl)
self.setIcon(load_pixmap('hp_logo', '128x128'))
self.cur_device_uri = device_uri
self.printer_name = printer_name
self.init_failed = False
self.num_copies = num_copies
self.contrast = contrast
self.quality = quality
self.reduction = reduction
self.fit_to_page = fit_to_page
self.setCentralWidget(QWidget(self, "qt_central_widget"))
self.FormLayout = QGridLayout(self.centralWidget(), 1, 1, 11, 6,
"FormLayout")
self.resize(QSize(600, 480).expandedTo(self.minimumSizeHint()))
self.clearWState(Qt.WState_Polished)
self.languageChange()
if self.cur_device_uri and self.printer_name:
log.error(
"You may not specify both a printer (-p) and a device (-d).")
self.FailureUI(
self.__tr(
"<p><b>You may not specify both a printer (-p) and a device (-d)."
))
self.cur_device_uri, self.printer_name = None, None
self.init_failed = True
self.cups_printers = cups.getPrinters()
log.debug(self.cups_printers)
if not self.cur_device_uri and not self.printer_name:
t = device.probeDevices(bus=bus,
filter={'copy-type': (operator.gt, 0)})
probed_devices = []
for d in t:
if d.startswith('hp:'):
probed_devices.append(d)
log.debug(probed_devices)
max_deviceid_size, x, devices = 0, 0, {}
for d in probed_devices:
printers = []
for p in self.cups_printers:
if p.device_uri == d:
printers.append(p.name)
devices[x] = (d, printers)
x += 1
max_deviceid_size = max(len(d), max_deviceid_size)
if x == 0:
from nodevicesform import NoDevicesForm
self.FailureUI(
self.__tr(
"<p><b>No devices found.</b><p>Please make sure your device is properly installed and try again."
))
self.init_failed = True
elif x == 1:
log.info(log.bold("Using device: %s" % devices[0][0]))
self.cur_device_uri = devices[0][0]
else:
from choosedevicedlg import ChooseDeviceDlg
dlg = ChooseDeviceDlg(devices) #, ['hp'])
if dlg.exec_loop() == QDialog.Accepted:
self.cur_device_uri = dlg.device_uri
else:
self.init_failed = True
self.CopyView = ScrollCopyView(None,
num_copies=num_copies,
contrast=contrast,
quality=quality,
reduction=reduction,
fit_to_page=fit_to_page,
parent=self.centralWidget(),
form=self)
self.FormLayout.addWidget(self.CopyView, 0, 0)
self.cur_device = self.cur_device_uri
if not self.init_failed:
try:
self.cur_device = copier.PMLCopyDevice(
device_uri=self.cur_device_uri,
printer_name=self.printer_name)
except Error:
log.error("Invalid device URI or printer name.")
self.FailureUI(
"<b>Invalid device URI or printer name.</b><p>Please check the parameters to hp-print and try again."
)
self.init_failed = True
else:
if self.cur_device.copy_type == COPY_TYPE_NONE:
self.FailureUI(
self.__tr(
"<b>Sorry, make copies functionality is not implemented for this device.</b>"
))
self.close()
return
self.cur_device_uri = self.cur_device.device_uri
user_conf.set('last_used', 'device_uri', self.cur_device_uri)
log.debug(self.cur_device_uri)
self.statusBar().message(self.cur_device.device_uri)
QTimer.singleShot(0, self.InitialUpdate)
def __init__(self, parent=None, name=None, modal=0, fl=0):
LoadPaperForm_base.__init__(self, parent, name, modal, fl)
self.Icon.setPixmap(load_pixmap('load_paper', 'other'))
def __init__(self, args, read_pipe):
QApplication.__init__(self, args)
self.read_pipe = read_pipe
self.fmt = "80s80sI32sI80sf"
self.fmt_size = struct.calcsize(self.fmt)
self.user_settings = utils.UserSettings()
self.user_settings.load()
self.user_settings.debug()
self.tray_icon = SystrayIcon(load_pixmap("hp_logo", "32x32", (22, 22)))
self.menu = QPopupMenu()
title_item = TitleItem(load_pixmap('hp_logo', '16x16', (16, 16)),
"HP Status Service")
i = self.menu.insertItem(title_item)
self.menu.setItemEnabled(i, False)
self.menu.insertSeparator()
self.menu.insertItem(self.tr("HP Device Manager..."),
self.toolbox_triggered)
# TODO:
#icon2 = QIconSet(load_pixmap('settings', '16x16'))
#self.menu.insertItem(icon2, self.tr("Options..."), self.preferences_triggered)
self.menu.insertSeparator()
icon3 = QIconSet(load_pixmap('quit', '16x16'))
self.menu.insertItem(icon3, self.tr("Quit"), self.quit_triggered)
self.tray_icon.show()
notifier = QSocketNotifier(self.read_pipe, QSocketNotifier.Read)
QObject.connect(notifier, SIGNAL("activated(int)"),
self.notifier_activated)
QObject.connect(self.tray_icon,
PYSIGNAL("contextMenuRequested(const QPoint&)"),
self.menu_requested)
self.icon_info = load_pixmap('info', '16x16')
self.icon_warn = load_pixmap('warning', '16x16')
self.icon_error = load_pixmap('error', '16x16')
if "--ignore-update-firsttime" not in args:
self.handle_hplip_updation()
self.timer = QTimer()
self.timer.connect(self.timer, SIGNAL("timeout()"),
self.handle_hplip_updation)
self.timer.start(UPGRADE_CHECK_DELAY)
# Cleans the /var/log/hp/tmp directory
#self.handle_hplip_clean()
#self.clean_timer = QTimer()
#self.clean_timer.connect(self.clean_timer,SIGNAL("timeout()"),self.handle_hplip_clean)
#self.clean_timer.start(CLEAN_EXEC_DELAY)
self.ERROR_STATE_TO_ICON = {
ERROR_STATE_CLEAR: self.icon_info,
ERROR_STATE_OK: self.icon_info,
ERROR_STATE_WARNING: self.icon_warn,
ERROR_STATE_ERROR: self.icon_error,
ERROR_STATE_LOW_SUPPLIES: self.icon_warn,
ERROR_STATE_BUSY: self.icon_warn,
ERROR_STATE_LOW_PAPER: self.icon_warn,
ERROR_STATE_PRINTING: self.icon_info,
ERROR_STATE_SCANNING: self.icon_info,
ERROR_STATE_PHOTOCARD: self.icon_info,
ERROR_STATE_FAXING: self.icon_info,
ERROR_STATE_COPYING: self.icon_info,
}
def __init__(self,
bus=['usb', 'par'],
device_uri=None,
printer_name=None,
parent=None,
name=None,
fl=0):
QMainWindow.__init__(self, parent, name, fl)
self.pc = None
self.device_uri = device_uri
self.printer_name = printer_name
self.init_failed = False
self.setIcon(load_pixmap('hp_logo', '128x128'))
self.setCentralWidget(QWidget(self, "qt_central_widget"))
self.FormLayout = QGridLayout(self.centralWidget(), 1, 1, 11, 6,
"FormLayout")
self.languageChange()
self.resize(QSize(600, 480).expandedTo(self.minimumSizeHint()))
self.clearWState(Qt.WState_Polished)
if self.device_uri and self.printer_name:
log.error(
"You may not specify both a printer (-p) and a device (-d).")
self.device_uri, self.printer_name = None, None
if not self.device_uri and not self.printer_name:
probed_devices = device.probeDevices(
bus=bus, filter={'pcard-type': (operator.eq, 1)})
cups_printers = cups.getPrinters()
log.debug(probed_devices)
log.debug(cups_printers)
max_deviceid_size, x, devices = 0, 0, {}
for d in probed_devices:
if d.startswith('hp:'):
printers = []
for p in cups_printers:
if p.device_uri == d:
printers.append(p.name)
devices[x] = (d, printers)
x += 1
max_deviceid_size = max(len(d), max_deviceid_size)
if x == 0:
from nodevicesform import NoDevicesForm
self.FailureUI(
self.__tr(
"<p><b>No devices found that support photo card access.</b><p>Please make sure your device is properly installed and try again."
))
self.init_failed = True
elif x == 1:
log.info(log.bold("Using device: %s" % devices[0][0]))
self.device_uri = devices[0][0]
else:
from choosedevicedlg import ChooseDeviceDlg
dlg = ChooseDeviceDlg(devices)
if dlg.exec_loop() == QDialog.Accepted:
self.device_uri = dlg.device_uri
else:
self.init_failed = True
self.dbus_avail, self.service, session_bus = device.init_dbus()
self.UnloadView = ScrollUnloadView(self.service, self.centralWidget(),
self, "UnloadView")
self.FormLayout.addWidget(self.UnloadView, 0, 0)
if not self.init_failed:
try:
self.cur_device = device.Device(device_uri=self.device_uri,
printer_name=self.printer_name)
except Error, e:
log.error("Invalid device URI or printer name.")
self.FailureUI(
"<b>Invalid device URI or printer name.</b><p>Please check the parameters to hp-print and try again."
)
self.init_failed = True
else:
self.device_uri = self.cur_device.device_uri
user_conf.set('last_used', 'device_uri', self.device_uri)
log.debug(self.device_uri)
self.statusBar().message(self.device_uri)
def __init__(self, parent=None, name=None, modal=0, fl=0):
LoadPaperForm_base.__init__(self, parent, name, modal, fl)
self.Icon.setPixmap(load_pixmap("load_paper", "other"))
def __init__(self,parent = None,name = None,modal = 0,fl = 0):
PaperEdgeAlignForm_base.__init__(self,parent,name,modal,fl)
self.Icon.setPixmap(load_pixmap("zca.png", 'other'))
self.value = 1
def __init__(self, parent, line, name=None, modal=0, fl=0):
ColorAdjForm_base.__init__(self, parent, name, modal, fl)
self.Icon.setPixmap(load_pixmap('color_adj'))
self.LineLabel.setText("""<b><font size="+1">%s</font></b>""" % line)
self.value = 11
def __init__(self,
parent,
line_id,
orientation,
colors,
line_count,
choice_count,
name=None,
modal=0,
fl=0):
QDialog.__init__(self, parent, name, modal, fl)
# line_id: 'A', 'B', etc.
# orientation: 'v' or 'h'
# colors: 'k' or 'c' or 'kc'
# line_count: 2 or 3
# choice_count: 5, 7, 9, 11, etc. (odd)
mid_point = (choice_count + 1) / 2
if not name:
self.setProperty("name", QVariant("AlignForm"))
AlignFormLayout = QGridLayout(self, 1, 1, 11, 6, "AlignFormLayout")
#self.helpButton = QPushButton(self,"helpButton")
#AlignFormLayout.addWidget(self.helpButton,1,0)
self.CancelButton = QPushButton(self, "CancelButton")
AlignFormLayout.addWidget(self.CancelButton, 1, 2)
self.ContinueButton = QPushButton(self, "ContinueButton")
AlignFormLayout.addWidget(self.ContinueButton, 1, 3)
spacer1 = QSpacerItem(270, 20, QSizePolicy.Expanding,
QSizePolicy.Minimum)
AlignFormLayout.addItem(spacer1, 1, 1)
self.buttonGroup = QButtonGroup(self, "buttonGroup")
self.buttonGroup.setColumnLayout(0, Qt.Vertical)
self.buttonGroup.layout().setSpacing(6)
self.buttonGroup.layout().setMargin(11)
buttonGroupLayout = QGridLayout(self.buttonGroup.layout())
buttonGroupLayout.setAlignment(Qt.AlignTop)
ChoiceLayout = QHBoxLayout(None, 0, 6, "ChoiceLayout")
for x in range(1, choice_count + 1):
exec 'self.radioButton%d = QRadioButton( self.buttonGroup, "radioButton%d" )' % (
x, x)
exec 'self.radioButton%d.setText( "%s%d" )' % (x, line_id, x)
if x == mid_point:
exec 'self.radioButton%d.setChecked( 1 )' % x
exec 'ChoiceLayout.addWidget( self.radioButton%d )' % x
buttonGroupLayout.addMultiCellLayout(ChoiceLayout, 1, 1, 0, 1)
self.Icon = QLabel(self.buttonGroup, "Icon")
self.Icon.setProperty(
"sizePolicy",
QVariant(
QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed, 0, 0,
self.Icon.sizePolicy().hasHeightForWidth())))
self.Icon.setProperty("scaledContents", QVariant(QVariant(1, 0)))
buttonGroupLayout.addWidget(self.Icon, 0, 0)
self.textLabel2_2 = QLabel(self.buttonGroup, "textLabel2_2")
self.textLabel2_2.setProperty(
"alignment", QVariant(QLabel.WordBreak | QLabel.AlignVCenter))
buttonGroupLayout.addWidget(self.textLabel2_2, 0, 1)
AlignFormLayout.addMultiCellWidget(self.buttonGroup, 0, 0, 0, 3)
self.languageChange()
self.resize(QSize(608, 222).expandedTo(self.minimumSizeHint()))
self.clearWState(Qt.WState_Polished)
self.connect(self.CancelButton, SIGNAL("clicked()"), self,
SLOT("reject()"))
self.connect(self.ContinueButton, SIGNAL("clicked()"), self,
SLOT("accept()"))
self.connect(self.buttonGroup, SIGNAL("clicked(int)"),
self.buttonGroup_clicked)
self.Icon.setPixmap(
load_pixmap('%s-%s-%d.png' % (orientation, colors, line_count),
'other'))
self.buttonGroup.setTitle(line_id)
self.value = (choice_count + 1) / 2
def __init__(self, args, read_pipe):
QApplication.__init__(self, args)
self.read_pipe = read_pipe
self.fmt = "80s80sI32sI80sf"
self.fmt_size = struct.calcsize(self.fmt)
self.user_settings = utils.UserSettings()
self.user_settings.load()
self.user_settings.debug()
self.tray_icon = SystrayIcon(load_pixmap("hp_logo", "32x32", (22, 22)))
self.menu = QPopupMenu()
title_item = TitleItem(load_pixmap('hp_logo', '16x16', (16, 16)), "HP Status Service")
i = self.menu.insertItem(title_item)
self.menu.setItemEnabled(i, False)
self.menu.insertSeparator()
self.menu.insertItem(self.tr("HP Device Manager..."), self.toolbox_triggered)
# TODO:
#icon2 = QIconSet(load_pixmap('settings', '16x16'))
#self.menu.insertItem(icon2, self.tr("Options..."), self.preferences_triggered)
self.menu.insertSeparator()
icon3 = QIconSet(load_pixmap('quit', '16x16'))
self.menu.insertItem(icon3, self.tr("Quit"), self.quit_triggered)
self.tray_icon.show()
notifier = QSocketNotifier(self.read_pipe, QSocketNotifier.Read)
QObject.connect(notifier, SIGNAL("activated(int)"), self.notifier_activated)
QObject.connect(self.tray_icon, PYSIGNAL("contextMenuRequested(const QPoint&)"), self.menu_requested)
self.icon_info = load_pixmap('info', '16x16')
self.icon_warn = load_pixmap('warning', '16x16')
self.icon_error = load_pixmap('error', '16x16')
if "--ignore-update-firsttime" not in args:
self.handle_hplip_updation()
self.timer = QTimer()
self.timer.connect(self.timer,SIGNAL("timeout()"),self.handle_hplip_updation)
self.timer.start(UPGRADE_CHECK_DELAY)
# Cleans the /var/log/hp/tmp directory
#self.handle_hplip_clean()
#self.clean_timer = QTimer()
#self.clean_timer.connect(self.clean_timer,SIGNAL("timeout()"),self.handle_hplip_clean)
#self.clean_timer.start(CLEAN_EXEC_DELAY)
self.ERROR_STATE_TO_ICON = {
ERROR_STATE_CLEAR: self.icon_info,
ERROR_STATE_OK: self.icon_info,
ERROR_STATE_WARNING: self.icon_warn,
ERROR_STATE_ERROR: self.icon_error,
ERROR_STATE_LOW_SUPPLIES: self.icon_warn,
ERROR_STATE_BUSY: self.icon_warn,
ERROR_STATE_LOW_PAPER: self.icon_warn,
ERROR_STATE_PRINTING: self.icon_info,
ERROR_STATE_SCANNING: self.icon_info,
ERROR_STATE_PHOTOCARD: self.icon_info,
ERROR_STATE_FAXING: self.icon_info,
ERROR_STATE_COPYING: self.icon_info,
}
def __init__(self, bus='cups', device_uri=None, printer_name=None,
num_copies=None, contrast=None, quality=None,
reduction=None, fit_to_page=None,
parent=None, name=None, modal=0, fl=0):
QMainWindow.__init__(self,parent,name,fl)
self.setIcon(load_pixmap('hp_logo', '128x128'))
self.cur_device_uri = device_uri
self.printer_name = printer_name
self.init_failed = False
self.num_copies = num_copies
self.contrast = contrast
self.quality = quality
self.reduction = reduction
self.fit_to_page = fit_to_page
self.setCentralWidget(QWidget(self,"qt_central_widget"))
self.FormLayout = QGridLayout(self.centralWidget(),1,1,11,6,"FormLayout")
self.resize(QSize(600,480).expandedTo(self.minimumSizeHint()))
self.clearWState(Qt.WState_Polished)
self.languageChange()
if self.cur_device_uri and self.printer_name:
log.error("You may not specify both a printer (-p) and a device (-d).")
self.FailureUI(self.__tr("<p><b>You may not specify both a printer (-p) and a device (-d)."))
self.cur_device_uri, self.printer_name = None, None
self.init_failed = True
self.cups_printers = cups.getPrinters()
log.debug(self.cups_printers)
if not self.cur_device_uri and not self.printer_name:
t = device.probeDevices(bus=bus, filter={'copy-type': (operator.gt, 0)})
probed_devices = []
for d in t:
if d.startswith('hp:'):
probed_devices.append(d)
log.debug(probed_devices)
max_deviceid_size, x, devices = 0, 0, {}
for d in probed_devices:
printers = []
for p in self.cups_printers:
if p.device_uri == d:
printers.append(p.name)
devices[x] = (d, printers)
x += 1
max_deviceid_size = max(len(d), max_deviceid_size)
if x == 0:
from nodevicesform import NoDevicesForm
self.FailureUI(self.__tr("<p><b>No devices found.</b><p>Please make sure your device is properly installed and try again."))
self.init_failed = True
elif x == 1:
log.info(log.bold("Using device: %s" % devices[0][0]))
self.cur_device_uri = devices[0][0]
else:
from choosedevicedlg import ChooseDeviceDlg
dlg = ChooseDeviceDlg(devices) #, ['hp'])
if dlg.exec_loop() == QDialog.Accepted:
self.cur_device_uri = dlg.device_uri
else:
self.init_failed = True
self.CopyView = ScrollCopyView(None, num_copies=num_copies,
contrast=contrast, quality=quality,
reduction=reduction, fit_to_page=fit_to_page,
parent=self.centralWidget(), form=self)
self.FormLayout.addWidget(self.CopyView,0,0)
self.cur_device = self.cur_device_uri
if not self.init_failed:
try:
self.cur_device = copier.PMLCopyDevice(device_uri=self.cur_device_uri,
printer_name=self.printer_name)
except Error:
log.error("Invalid device URI or printer name.")
self.FailureUI("<b>Invalid device URI or printer name.</b><p>Please check the parameters to hp-print and try again.")
self.init_failed = True
else:
if self.cur_device.copy_type == COPY_TYPE_NONE:
self.FailureUI(self.__tr("<b>Sorry, make copies functionality is not implemented for this device.</b>"))
self.close()
return
self.cur_device_uri = self.cur_device.device_uri
user_conf.set('last_used', 'device_uri', self.cur_device_uri)
log.debug(self.cur_device_uri)
self.statusBar().message(self.cur_device.device_uri)
QTimer.singleShot(0, self.InitialUpdate)
