def generate_PCR_6_default_config(self, filename):
"""Generate the WinnForum configuration for PCR 6."""
# File path where SAS UUT claimed ppa boundary generated in PCR.1 test
pcr_1_test_config_file_path = os.path.join('testcases', 'configs',
'test_WINNF_FT_S_PCR_1',
'default.config')
sas_uut_claimed_ppa_boundary_file_path = getSasUutClaimedPpaBoundaryFilePath(
'default.config')
# Load SAS UUT claimed ppa boundary and check if any error while retrieving
# SAS UUT claimed ppa boundary generated in PCR.1 test.
try:
with open(sas_uut_claimed_ppa_boundary_file_path,
'r') as claimed_ppa_file:
user_claimed_ppa_contour = json.load(claimed_ppa_file)
except IOError:
raise RuntimeError(
'ConfigError:There is an error in reading path:%s \n\n' %
sas_uut_claimed_ppa_boundary_file_path)
# Expand the user claimed ppa boundary by approximately 1 kilometer.
user_claimed_ppa_contour_feature_collection = utils.InsureFeatureCollection(
utils.ShrinkAndCleanPolygon(
user_claimed_ppa_contour['features'][0]['geometry'], -1e-2),
as_dict=True)
# Create the actual config.
config = {
'configPCR_1': pcr_1_test_config_file_path,
'userClaimedPpaContour':
user_claimed_ppa_contour_feature_collection
}
writeConfig(filename, config)
def generate_PCR_5_default_config(self, filename):
"""Generate the WinnForum configuration for PCR 5."""
# Load PAL records.
pal_record_1 = json.load(
open(os.path.join('testcases', 'testdata', 'pal_record_1.json')))
pal_record_2 = json.load(
open(os.path.join('testcases', 'testdata', 'pal_record_2.json')))
# Use the FIPS codes of adjacent census tracts.
pal_record_1['fipsCode'] = 20063955100
pal_record_2['fipsCode'] = 20063955200
# Set the PAL frequency.
pal_low_frequency = 3570000000
pal_high_frequency = 3580000000
# Load device info.
device_a = json.load(
open(os.path.join('testcases', 'testdata', 'device_a.json')))
device_b = json.load(
open(os.path.join('testcases', 'testdata', 'device_b.json')))
# light check to ensure CBSD userId is not same.
self.assertNotEqual(device_a['userId'], device_b['userId'])
# The userId of at least one of the CBSDs is not associated to the userId of
# the PAL Holder configured in the PAL record for this service area.
pal_records = makePalRecordsConsistent([pal_record_1, pal_record_2],
pal_low_frequency,
pal_high_frequency,
device_a['userId'])
# CBSDs are located inside the service area.
device_a['installationParam']['latitude'], device_a[
'installationParam']['longitude'] = 39.0373, -100.4184
device_b['installationParam']['latitude'], device_b[
'installationParam']['longitude'] = 39.0378, -100.4785
conditionals_b = {
'cbsdCategory': device_b['cbsdCategory'],
'fccId': device_b['fccId'],
'cbsdSerialNumber': device_b['cbsdSerialNumber'],
'airInterface': device_b['airInterface'],
'installationParam': device_b['installationParam'],
'measCapability': device_b['measCapability']
}
conditionals = [conditionals_b]
del device_b['installationParam']
del device_b['cbsdCategory']
del device_b['airInterface']
del device_b['measCapability']
# Create the actual config.
devices = [device_a, device_b]
config = {
'registrationRequests': devices,
'conditionalRegistrationData': conditionals,
'palRecords': pal_records
}
writeConfig(filename, config)
def generate_FT_S_PAT_default_config(self, filename):
"""Generates the WinnForum configuration for PAT.1."""
# Load Devices
device_a = json.load(
open(os.path.join('testcases', 'testdata', 'device_a.json')))
# load FSS
fss_data = json.load(
open(os.path.join('testcases', 'testdata', 'fss_record_0.json')))
fss_record_0 = fss_data['record']
fss_record_0['rxAntennaGainRequired'] = True
reliability_level = -1
config = []
config.append({
'reliabilityLevel': reliability_level,
'cbsd': cbsddata(device_a),
'fss': fssdata(fss_record_0, True)
})
# Load PPA
ppa_record = json.load(
open(os.path.join('testcases', 'testdata', 'ppa_record_3.json')))
reliability_level = -1
config.append({
'reliabilityLevel': reliability_level,
'cbsd': cbsddata(device_a),
'ppa': ppa_record['zone']['features'][0]
})
writeConfig(filename, config)
def generate_HBT_10_default_config(self, filename):
"""Generates the WinnForum configuration for HBT.10."""
# Load device info
device_a = json.load(
open(os.path.join('testcases', 'testdata', 'device_a.json')))
device_c = json.load(
open(os.path.join('testcases', 'testdata', 'device_c.json')))
device_b = json.load(
open(os.path.join('testcases', 'testdata', 'device_b.json')))
# Load grant.json
grant_a = json.load(
open(os.path.join('testcases', 'testdata', 'grant_0.json')))
grant_c = json.load(
open(os.path.join('testcases', 'testdata', 'grant_0.json')))
grant_b = json.load(
open(os.path.join('testcases', 'testdata', 'grant_0.json')))
heartbeat_a = {'operationState': 'GRANTED'}
heartbeat_c = {'grantId': 'REMOVE', 'operationState': 'GRANTED'}
heartbeat_b = {'operationState': 'GRANTED', 'grantRenew': True}
# Device a and device_c are Cat A.
self.assertEqual(device_a['cbsdCategory'], 'A')
self.assertEqual(device_c['cbsdCategory'], 'A')
# Device_b is Category B with conditionals pre-loaded.
self.assertEqual(device_b['cbsdCategory'], 'B')
conditionals_b = {
'cbsdCategory': device_b['cbsdCategory'],
'fccId': device_b['fccId'],
'cbsdSerialNumber': device_b['cbsdSerialNumber'],
'airInterface': device_b['airInterface'],
'installationParam': device_b['installationParam']
}
conditionals = [conditionals_b]
del device_b['installationParam']
del device_b['cbsdCategory']
del device_b['airInterface']
# Create the actual config.
devices = [device_a, device_c, device_b]
blacklist_devices = [device_a]
grant_requests = [grant_a, grant_c, grant_b]
heartbeat_requests = [heartbeat_a, heartbeat_c, heartbeat_b]
config = {
'fccIdsBlacklist': [d['fccId'] for d in blacklist_devices],
'conditionalRegistrationData': conditionals,
'registrationRequests': devices,
'grantRequests': grant_requests,
'heartbeatRequests': heartbeat_requests,
# First request has a blacklisted CBSD => BLACKLISTED
# Second request is missing Grant ID => MISSING_PARAM
# Third request has all valid params => SUCCESS
'expectedResponseCodes': [(101, ), (102, ), (0, )]
}
writeConfig(filename, config)
def generate_SDS_10_default_config(self, filename):
"""Generates the WinnForum configuration for SDS_10. """
# Create the actual config for domain proxy cert/key path
config = {
'domainProxyCert': getCertFilename("domain_proxy_wrong_type.cert"),
'domainProxyKey': getCertFilename("server.key")
}
writeConfig(filename, config)
def generate_SCS_11_default_config(self, filename):
"""Generate the WinnForum configuration for SCS_11."""
# Create the configuration for blacklisted client cert/key path
config = {
'clientCert': getCertFilename("device_blacklisted.cert"),
'clientKey': getCertFilename("device_blacklisted.key")
}
writeConfig(filename, config)
def generate_SCS_16_default_config(self, filename):
"""Generate the WinnForum configuration for SCS_16."""
# Create the configuration for client cert/key path.
config = {
'clientCert': getCertFilename("device_cert_from_revoked_ca.cert"),
'clientKey': getCertFilename("device_cert_from_revoked_ca.key")
}
writeConfig(filename, config)
def generate_SDS_12_default_config(self, filename):
"""Generates the WinnForum configuration for SDS.12"""
# Create the actual config for domain proxy cert/key path
config = {
'domainProxyCert': getCertFilename("domain_proxy_expired.cert"),
'domainProxyKey': getCertFilename("domain_proxy_expired.key")
}
writeConfig(filename, config)
def generate_SSS_11_default_config(self, filename):
"""Generate the WinnForum configuration for SSS_11."""
# Create the configuration for blacklisted SAS cert/key path.
config = {
'sasCert': getCertFilename("sas_blacklisted.cert"),
'sasKey': getCertFilename("sas_blacklisted.key")
}
writeConfig(filename, config)
def generate_SCS_15_default_config(self, filename):
""" Generates the WinnForum configuration for SCS.15 """
# Create the actual config for client cert/key path
config = {
'clientCert': getCertFilename("device_inapplicable.cert"),
'clientKey': getCertFilename("device_a.key")
}
writeConfig(filename, config)
def generate_SSS_15_default_config(self, filename):
"""Generates the WinnForum configuration for SSS_15. """
# Create the actual config for SAS cert/key path
config = {
'sasCert': getCertFilename("sas_inapplicable.cert"),
'sasKey': getCertFilename("sas.key")
}
writeConfig(filename, config)
def generate_SCS_7_default_config(self, filename):
"""Generates the WinnForum configuration for SCS_7"""
# Create the actual config for client cert/key path
config = {
'clientCert': getCertFilename("device_corrupted.cert"),
'clientKey': getCertFilename("device_corrupted.key")
}
writeConfig(filename, config)
def generate_SSS_6_default_config(self, filename):
"""Generates the WinnForum configuration for SSS_6"""
# Create the actual config for SAS cert/key path
config = {
'sasCert': getCertFilename("unrecognized_sas.cert"),
'sasKey': getCertFilename("unrecognized_sas.key")
}
writeConfig(filename, config)
def generate_SSS_16_default_config(self, filename):
"""Generate the WinnForum configuration for SSS_16."""
# Create the configuration for SAS cert/key path.
config = {
'sasCert': getCertFilename("sas_cert_from_revoked_ca.cert"),
'sasKey': getCertFilename("sas_cert_from_revoked_ca.key")
}
writeConfig(filename, config)
def generate_SSS_10_default_config(self, filename):
"""Generates the WinnForum configuration for SSS_10. """
# Create the actual config for SAS cert/key path
config = {
'sasCert': getCertFilename("sas_wrong_type.cert"),
'sasKey': getCertFilename("device_a.key")
}
writeConfig(filename, config)
def generate_SCS_6_default_config(self, filename):
"""Generates the WinnForum configuration for SCS_6"""
# Create the actual config for client cert/key path
config = {
'clientCert': getCertFilename("unrecognized_device.cert"),
'clientKey': getCertFilename("unrecognized_device.key")
}
writeConfig(filename, config)
def generate_SCS_10_default_config(self, filename):
"""Generates the WinnForum configuration for SCS_10. """
# Create the actual config for client cert/key path
config = {
'clientCert': getCertFilename("device_wrong_type.cert"),
'clientKey': getCertFilename("server.key")
}
writeConfig(filename, config)
def generate_SDS_6_default_config(self, filename):
"""Generates the WinnForum configuration for SDS_6"""
# Create the actual config for domain proxy cert/key path
config = {
'domainProxyCert':
getCertFilename("unrecognized_domain_proxy.cert"),
'domainProxyKey': getCertFilename("unrecognized_domain_proxy.key")
}
writeConfig(filename, config)
def generate_SDS_11_default_config(self, filename):
"""Generate the WinnForum configuration for SDS_11."""
# Create the configuration for blacklisted domain proxy cert/key path.
config = {
'domainProxyCert':
getCertFilename("domain_proxy_blacklisted.cert"),
'domainProxyKey': getCertFilename("domain_proxy_blacklisted.key")
}
writeConfig(filename, config)
def generate_SDS_16_default_config(self, filename):
"""Generate the WinnForum configuration for SDS_16."""
# Create the configuration for domain proxy cert/key path.
config = {
'domainProxyCert':
getCertFilename("domain_proxy_cert_from_revoked_ca.cert"),
'domainProxyKey':
getCertFilename("domain_proxy_cert_from_revoked_ca.key")
}
writeConfig(filename, config)
def generate_QPR_8_default_config(self, filename):
"""Generates the WinnForum configuration for QPR.8."""
# Load device info
# Cat B - between 2.4 km - 4.8 km of Waipahu, Hawaii Field Office.
device_b = json.load(
open(os.path.join('testcases', 'testdata', 'device_b.json')))
device_b['installationParam']['latitude'] = 21.397934
device_b['installationParam']['longitude'] = -158.034459
# device_b is Category B with conditionals pre-loaded.
self.assertEqual(device_b['cbsdCategory'], 'B')
conditionals_b = {
'cbsdCategory': device_b['cbsdCategory'],
'fccId': device_b['fccId'],
'cbsdSerialNumber': device_b['cbsdSerialNumber'],
'airInterface': device_b['airInterface'],
'installationParam': device_b['installationParam'],
'measCapability': device_b['measCapability']
}
del device_b['installationParam']
del device_b['cbsdCategory']
del device_b['airInterface']
del device_b['measCapability']
# Grant Requests
grant_0 = {
'operationParam': {
'maxEirp': 35,
'operationFrequencyRange': {
'lowFrequency': 3650000000,
'highFrequency': 3660000000
}
}
}
grant_1 = {
'operationParam': {
'maxEirp': 35,
'operationFrequencyRange': {
'lowFrequency': 3660000000,
'highFrequency': 3670000000
}
}
}
# Create the actual config.
config = {
'registrationRequest': device_b,
'conditionalRegistrationData': [conditionals_b],
'grantRequest1': grant_0,
'grantRequest2': grant_1
}
writeConfig(filename, config)
def generate_REG_13_default_config(self, filename):
"""Generates the WinnForum configuration for REG.13."""
# Load device info
device_a = json.load(
open(os.path.join('testcases', 'testdata', 'device_a.json')))
# Create the actual config.
devices = [device_a]
config = {
'fccIds': [(d['fccId'], 47) for d in devices],
'userIds': [d['userId'] for d in devices],
'registrationRequests': devices,
# Configure SAS version to a higher than supported version.
'sasVersion': 'v5.0'
}
writeConfig(filename, config)
def generate_REG_11_default_config(self, filename):
"""Generates the WinnForum configuration for REG.11."""
# Load device info
device_a = json.load(
open(os.path.join('testcases', 'testdata', 'device_a.json')))
device_c = json.load(
open(os.path.join('testcases', 'testdata', 'device_c.json')))
device_b = json.load(
open(os.path.join('testcases', 'testdata', 'device_b.json')))
device_d = json.load(
open(os.path.join('testcases', 'testdata', 'device_d.json')))
# Device #1 is Category A.
self.assertEqual(device_a['cbsdCategory'], 'A')
# Device #2 is Category A with one conditional parameter missing.
self.assertEqual(device_c['cbsdCategory'], 'A')
del device_c['installationParam']['indoorDeployment']
# Device #3 is Category B.
self.assertEqual(device_b['cbsdCategory'], 'B')
# Device #4 is Category B with one conditional missing and conditionals
# pre-loaded.
self.assertEqual(device_d['cbsdCategory'], 'B')
conditionals_d = {
'cbsdCategory': device_d['cbsdCategory'],
'fccId': device_d['fccId'],
'cbsdSerialNumber': device_d['cbsdSerialNumber'],
'airInterface': device_d['airInterface'],
'installationParam': device_d['installationParam']
}
del conditionals_d['installationParam']['antennaBeamwidth']
conditionals = [conditionals_d]
# Create the actual config.
devices = [device_a, device_c, device_b, device_d]
config = {
'fccIds': [(d['fccId'], 47) for d in devices],
'userIds': [d['userId'] for d in devices],
'registrationRequests': devices,
'conditionalRegistrationData': conditionals,
'expectedResponseCodes': [(0,), (200,), (103,), (103,)]
}
writeConfig(filename, config)
def generate_SSS_18_default_config(self, filename):
""" Generates the WinnForum configuration for SSS.18 """
# Create the actual config for SAS cert/key path
valid_cert_key_pair = {
'cert': getCertFilename('sas.cert'),
'key': getCertFilename('sas.key')
}
invalid_cert_key_pair = {
'cert': getCertFilename('sas_expired.cert'),
'key': getCertFilename('sas_expired.key')
}
config = {
'validCertKeyPair': valid_cert_key_pair,
'invalidCertKeyPair': invalid_cert_key_pair
}
writeConfig(filename, config)
def generate_QPR_2_default_config(self, filename):
"""Generates the WinnForum configuration for QPR.2."""
# Load device info
# CBSD 1: Category A CBSD located within the boundary of the NRAO / NRRO
# Quiet Zone.
device_1 = json.load(
open(os.path.join('testcases', 'testdata', 'device_a.json')))
device_1['installationParam']['latitude'] = 39.244586
device_1['installationParam']['longitude'] = -78.505269
# CBSD 2: Category B CBSD located within the boundary of the NRAO / NRRO
# Quiet Zone.
device_2 = json.load(
open(os.path.join('testcases', 'testdata', 'device_b.json')))
device_2['installationParam']['latitude'] = 39.247287
device_2['installationParam']['longitude'] = -80.489236
# device_1 is Category A.
self.assertEqual(device_1['cbsdCategory'], 'A')
# device_2 is Category B with conditionals pre-loaded.
self.assertEqual(device_2['cbsdCategory'], 'B')
conditionals_2 = {
'cbsdCategory': device_2['cbsdCategory'],
'fccId': device_2['fccId'],
'cbsdSerialNumber': device_2['cbsdSerialNumber'],
'airInterface': device_2['airInterface'],
'installationParam': device_2['installationParam'],
'measCapability': device_2['measCapability']
}
conditionals = [conditionals_2]
del device_2['installationParam']
del device_2['cbsdCategory']
del device_2['airInterface']
del device_2['measCapability']
# Create the actual config.
devices = [device_1, device_2]
config = {
'registrationRequests': devices,
'conditionalRegistrationData': conditionals,
}
writeConfig(filename, config)
def generate_QPR_6_default_config(self, filename):
"""Generates the WinnForum configuration for QPR.6."""
# Load device info
# CBSD 1: Category A within 2.4 km of Waipahu, Hawaii FCC Field Office.
device_1 = json.load(
open(os.path.join('testcases', 'testdata', 'device_a.json')))
device_1['installationParam']['latitude'] = 21.377719
device_1['installationParam']['longitude'] = -157.973411
# CBSD 2: Category B within 2.4 km of Allegan, Michigan FCC Field Office.
device_2 = json.load(
open(os.path.join('testcases', 'testdata', 'device_b.json')))
device_2['installationParam']['latitude'] = 42.586213
device_2['installationParam']['longitude'] = -85.955594
# device_1 is Category A.
self.assertEqual(device_1['cbsdCategory'], 'A')
# device_2 is Category B with conditionals pre-loaded.
self.assertEqual(device_2['cbsdCategory'], 'B')
conditionals_2 = {
'cbsdCategory': device_2['cbsdCategory'],
'fccId': device_2['fccId'],
'cbsdSerialNumber': device_2['cbsdSerialNumber'],
'airInterface': device_2['airInterface'],
'installationParam': device_2['installationParam'],
'measCapability': device_2['measCapability']
}
conditionals = [conditionals_2]
del device_2['installationParam']
del device_2['cbsdCategory']
del device_2['airInterface']
del device_2['measCapability']
# Create the actual config.
devices = [device_1, device_2]
config = {
'registrationRequests': devices,
'conditionalRegistrationData': conditionals,
}
writeConfig(filename, config)
def generate_REG_12_default_config(self, filename):
"""Generates the WinnForum configuration for REG.12."""
# Load device info
device_a = json.load(
open(os.path.join('testcases', 'testdata', 'device_a.json')))
device_b = json.load(
open(os.path.join('testcases', 'testdata', 'device_b.json')))
# Device_a is Category A.
self.assertEqual(device_a['cbsdCategory'], 'A')
# Device_b is Category B with conditionals pre-loaded.
self.assertEqual(device_b['cbsdCategory'], 'B')
conditionals_b = {
'cbsdCategory': device_b['cbsdCategory'],
'fccId': device_b['fccId'],
'cbsdSerialNumber': device_b['cbsdSerialNumber'],
'airInterface': device_b['airInterface'],
'installationParam': device_b['installationParam']
}
conditionals = [conditionals_b]
del device_b['cbsdCategory']
del device_b['airInterface']
del device_b['installationParam']
# Create the actual config.
devices = [device_a, device_b]
blacklist_devices = [device_a]
reregister_devices = [device_a, device_b]
config = {
'fccIds': [(d['fccId'], 47) for d in devices],
'fccIdsBlacklist': [d['fccId'] for d in blacklist_devices],
'userIds': [d['userId'] for d in devices],
'registrationRequests': devices,
'reregistrationRequests': reregister_devices,
'conditionalRegistrationData': conditionals,
'expectedResponseCodes': [(101,), (0,)]
}
writeConfig(filename, config)
def generate_GPR_1_default_config(self, filename):
""" Generates the WinnForum configuration for GPR.1. """
# Load GWPZ Record
gwpz_record_1 = json.load(
open(os.path.join('testcases', 'testdata', 'gwpz_record_0.json')))
# Load devices info
device_1 = json.load(
open(os.path.join('testcases', 'testdata', 'device_a.json')))
# Moving device_1 to a location within 40 KMs of GWPZ zone
device_1['installationParam']['latitude'] = 39.10448
device_1['installationParam']['longitude'] = -99.7792
device_2 = json.load(
open(os.path.join('testcases', 'testdata', 'device_b.json')))
# Moving device_2 to a location outside 40 KMs of GWPZ zone
device_2['installationParam']['latitude'] = 37.83075
device_2['installationParam']['longitude'] = -107.65025
device_3 = json.load(
open(os.path.join('testcases', 'testdata', 'device_c.json')))
# Moving device_3 to a location inside GWPZ zone
device_3['installationParam']['latitude'], \
device_3['installationParam']['longitude'] = getRandomLatLongInPolygon(gwpz_record_1)
device_4 = json.load(
open(os.path.join('testcases', 'testdata', 'device_d.json')))
# Moving device_4 to a location outside 40 KMs of GWPZ zone
device_4['installationParam']['latitude'] = 38.0934
device_4['installationParam']['longitude'] = -106.91676
# Load Grant requests
grant_request_1 = json.load(
open(os.path.join('testcases', 'testdata', 'grant_0.json')))
grant_request_2 = json.load(
open(os.path.join('testcases', 'testdata', 'grant_1.json')))
grant_request_3 = json.load(
open(os.path.join('testcases', 'testdata', 'grant_2.json')))
grant_request_4 = json.load(
open(os.path.join('testcases', 'testdata', 'grant_0.json')))
# device_b and device_d are Category B
# Load Conditional Data
self.assertEqual(device_2['cbsdCategory'], 'B')
conditionals_device_2 = {
'cbsdCategory': device_2['cbsdCategory'],
'fccId': device_2['fccId'],
'cbsdSerialNumber': device_2['cbsdSerialNumber'],
'airInterface': device_2['airInterface'],
'installationParam': device_2['installationParam'],
'measCapability': device_2['measCapability']
}
self.assertEqual(device_4['cbsdCategory'], 'B')
conditionals_device_4 = {
'cbsdCategory': device_4['cbsdCategory'],
'fccId': device_4['fccId'],
'cbsdSerialNumber': device_4['cbsdSerialNumber'],
'airInterface': device_4['airInterface'],
'installationParam': device_4['installationParam'],
'measCapability': device_4['measCapability']
}
# Remove conditionals from registration
del device_2['cbsdCategory']
del device_2['airInterface']
del device_2['installationParam']
del device_2['measCapability']
del device_4['cbsdCategory']
del device_4['airInterface']
del device_4['installationParam']
del device_4['measCapability']
# Registration and grant records
cbsd_records_domain_proxy_0 = {
'registrationRequests': [device_1, device_2],
'grantRequests': [grant_request_1, grant_request_2],
'conditionalRegistrationData': [conditionals_device_2]
}
cbsd_records_domain_proxy_1 = {
'registrationRequests': [device_3],
'grantRequests': [grant_request_3],
'conditionalRegistrationData': []
}
# Protected entity record
protected_entities = {
'gwpzRecords': [gwpz_record_1]
}
iteration_config = {
'cbsdRequestsWithDomainProxies': [cbsd_records_domain_proxy_0,
cbsd_records_domain_proxy_1],
'cbsdRecords': [{
'registrationRequest': device_4,
'grantRequest': grant_request_4,
'conditionalRegistrationData': conditionals_device_4,
'clientCert': getCertFilename('device_d.cert'),
'clientKey': getCertFilename('device_d.key')
}],
'protectedEntities': protected_entities,
'dpaActivationList': [],
'dpaDeactivationList': [],
'sasTestHarnessData': []
}
# Create the actual config.
config = {
'initialCbsdRequestsWithDomainProxies': self.getEmptyCbsdRequestsWithDomainProxies(2),
'initialCbsdRecords': [],
'iterationData': [iteration_config],
'sasTestHarnessConfigs': [],
'domainProxyConfigs': [{
'cert': getCertFilename('domain_proxy.cert'),
'key': getCertFilename('domain_proxy.key')
}, {
'cert': getCertFilename('domain_proxy_1.cert'),
'key': getCertFilename('domain_proxy_1.key')
}]
}
writeConfig(filename, config)
def generate_GPR_3_default_config(self, filename):
""" Generates the WinnForum configuration for GPR.3 """
# Load GWPZ Record
gwpz_record_1 = json.load(
open(os.path.join('testcases', 'testdata', 'gwpz_record_0.json')))
# Load devices info
device_1 = json.load(
open(os.path.join('testcases', 'testdata', 'device_a.json')))
# Moving device_1 to a location inside GWPZ zone
device_1['installationParam']['latitude'], \
device_1['installationParam']['longitude'] = getRandomLatLongInPolygon(gwpz_record_1)
device_2 = json.load(
open(os.path.join('testcases', 'testdata', 'device_b.json')))
# Moving device_2 to a location inside GWPZ zone
device_2['installationParam']['latitude'], \
device_2['installationParam']['longitude'] = getRandomLatLongInPolygon(gwpz_record_1)
# Load Grant requests
grant_request_1 = json.load(
open(os.path.join('testcases', 'testdata', 'grant_0.json')))
grant_request_1['operationParam']['operationFrequencyRange']['lowFrequency'] = 3650000000
grant_request_1['operationParam']['operationFrequencyRange']['highFrequency'] = 3655000000
grant_request_2 = json.load(
open(os.path.join('testcases', 'testdata', 'grant_1.json')))
grant_request_2['operationParam']['operationFrequencyRange']['lowFrequency'] = 3660000000
grant_request_2['operationParam']['operationFrequencyRange']['highFrequency'] = 3665000000
# device_b is Category B
# Load Conditional Data
self.assertEqual(device_2['cbsdCategory'], 'B')
conditionals_device_2 = {
'cbsdCategory': device_2['cbsdCategory'],
'fccId': device_2['fccId'],
'cbsdSerialNumber': device_2['cbsdSerialNumber'],
'airInterface': device_2['airInterface'],
'installationParam': device_2['installationParam'],
'measCapability': device_2['measCapability']
}
conditionals = [conditionals_device_2]
# Remove conditionals from registration
del device_2['cbsdCategory']
del device_2['airInterface']
del device_2['installationParam']
del device_2['measCapability']
devices = [device_1, device_2]
grants = [grant_request_1, grant_request_2]
# Create the actual config.
config = {
'registrationRequests': devices,
'grantRequests': grants,
'conditionalRegistrationData': conditionals,
'gwpzRecord': gwpz_record_1
}
writeConfig(filename, config)
def generate_GPR_2_default_config(self, filename):
""" Generates the WinnForum configuration for GPR.2. """
# Load GWPZ Record
gwpz_record_1 = json.load(
open(os.path.join('testcases', 'testdata', 'gwpz_record_0.json')))
# Load devices info
device_1 = json.load(
open(os.path.join('testcases', 'testdata', 'device_a.json')))
# Moving device_1 to a location within 40 KMs of GWPZ zone
device_1['installationParam']['latitude'] = 39.10448
device_1['installationParam']['longitude'] = -99.7792
device_2 = json.load(
open(os.path.join('testcases', 'testdata', 'device_b.json')))
# Moving device_2 to a location outside 40 KMs of GWPZ zone
device_2['installationParam']['latitude'] = 37.83075
device_2['installationParam']['longitude'] = -107.65025
device_3 = json.load(
open(os.path.join('testcases', 'testdata', 'device_c.json')))
# Moving device_3 to a location inside GWPZ zone
device_3['installationParam']['latitude'], \
device_3['installationParam']['longitude'] = getRandomLatLongInPolygon(gwpz_record_1)
device_4 = json.load(
open(os.path.join('testcases', 'testdata', 'device_d.json')))
# Moving device_4 to a location outside 40 KMs of GWPZ zone
device_4['installationParam']['latitude'] = 38.0934
device_4['installationParam']['longitude'] = -106.91676
# Load Grant requests
grant_request_1 = json.load(
open(os.path.join('testcases', 'testdata', 'grant_0.json')))
grant_request_1['operationParam']['operationFrequencyRange']['lowFrequency'] = 3650000000
grant_request_1['operationParam']['operationFrequencyRange']['highFrequency'] = 3655000000
grant_request_2 = json.load(
open(os.path.join('testcases', 'testdata', 'grant_1.json')))
grant_request_2['operationParam']['operationFrequencyRange']['lowFrequency'] = 3660000000
grant_request_2['operationParam']['operationFrequencyRange']['highFrequency'] = 3665000000
grant_request_3 = json.load(
open(os.path.join('testcases', 'testdata', 'grant_2.json')))
grant_request_3['operationParam']['operationFrequencyRange']['lowFrequency'] = 3670000000
grant_request_3['operationParam']['operationFrequencyRange']['highFrequency'] = 3680000000
grant_request_4 = json.load(
open(os.path.join('testcases', 'testdata', 'grant_0.json')))
grant_request_4['operationParam']['operationFrequencyRange']['lowFrequency'] = 3690000000
grant_request_4['operationParam']['operationFrequencyRange']['highFrequency'] = 3700000000
# device_b and device_d are Category B
# Load Conditional Data
self.assertEqual(device_2['cbsdCategory'], 'B')
conditionals_device_2 = {
'cbsdCategory': device_2['cbsdCategory'],
'fccId': device_2['fccId'],
'cbsdSerialNumber': device_2['cbsdSerialNumber'],
'airInterface': device_2['airInterface'],
'installationParam': device_2['installationParam'],
'measCapability': device_2['measCapability']
}
self.assertEqual(device_4['cbsdCategory'], 'B')
conditionals_device_4 = {
'cbsdCategory': device_4['cbsdCategory'],
'fccId': device_4['fccId'],
'cbsdSerialNumber': device_4['cbsdSerialNumber'],
'airInterface': device_4['airInterface'],
'installationParam': device_4['installationParam'],
'measCapability': device_4['measCapability']
}
# Remove conditionals from registration
del device_2['cbsdCategory']
del device_2['airInterface']
del device_2['installationParam']
del device_2['measCapability']
del device_4['cbsdCategory']
del device_4['airInterface']
del device_4['installationParam']
del device_4['measCapability']
# Registration and grant records
cbsd_records_domain_proxy_0 = {
'registrationRequests': [device_1, device_2],
'grantRequests': [grant_request_1, grant_request_2],
'conditionalRegistrationData': [conditionals_device_2]
}
cbsd_records_domain_proxy_1 = {
'registrationRequests': [device_3],
'grantRequests': [grant_request_3],
'conditionalRegistrationData': []
}
# Protected entity record
protected_entities = {
'gwpzRecords': [gwpz_record_1]
}
# SAS Test Harnesses configurations,
# Following configurations are for two SAS test harnesses
sas_test_harness_device_1 = json.load(
open(os.path.join('testcases', 'testdata', 'device_a.json')))
sas_test_harness_device_1['fccId'] = "test_fcc_id_e"
sas_test_harness_device_1['userId'] = "test_user_id_e"
sas_test_harness_device_2 = json.load(
open(os.path.join('testcases', 'testdata', 'device_b.json')))
sas_test_harness_device_2['fccId'] = "test_fcc_id_f"
sas_test_harness_device_2['userId'] = "test_user_id_f"
sas_test_harness_device_3 = json.load(
open(os.path.join('testcases', 'testdata', 'device_c.json')))
sas_test_harness_device_3['fccId'] = "test_fcc_id_g"
sas_test_harness_device_3['userId'] = "test_user_id_g"
# Generate Cbsd FAD Records for SAS Test Harness 0
cbsd_fad_records_sas_test_harness_0 = generateCbsdRecords(
[sas_test_harness_device_1],
[[grant_request_1]]
)
# Generate Cbsd FAD Records for SAS Test Harness 1
cbsd_fad_records_sas_test_harness_1 = generateCbsdRecords(
[sas_test_harness_device_2, sas_test_harness_device_3],
[[grant_request_2], [grant_request_3]]
)
# Generate SAS Test Harnesses dump records
dump_records_sas_test_harness_0 = {
'cbsdRecords': cbsd_fad_records_sas_test_harness_0
}
dump_records_sas_test_harness_1 = {
'cbsdRecords': cbsd_fad_records_sas_test_harness_1
}
# SAS Test Harnesses configuration
sas_test_harness_0_config = {
'sasTestHarnessName': 'SAS-TH-1',
'hostName': getFqdnLocalhost(),
'port': getUnusedPort(),
'serverCert': getCertFilename('sas.cert'),
'serverKey': getCertFilename('sas.key'),
'caCert': getCertFilename('ca.cert')
}
sas_test_harness_1_config = {
'sasTestHarnessName': 'SAS-TH-2',
'hostName': getFqdnLocalhost(),
'port': getUnusedPort(),
'serverCert': getCertFilename('sas_1.cert'),
'serverKey': getCertFilename('sas_1.key'),
'caCert': getCertFilename('ca.cert')
}
iteration_config = {
'cbsdRequestsWithDomainProxies': [cbsd_records_domain_proxy_0,
cbsd_records_domain_proxy_1],
'cbsdRecords': [{
'registrationRequest': device_4,
'grantRequest': grant_request_4,
'conditionalRegistrationData': conditionals_device_4,
'clientCert': getCertFilename('device_d.cert'),
'clientKey': getCertFilename('device_d.key')
}],
'protectedEntities': protected_entities,
'dpaActivationList': [],
'dpaDeactivationList': [],
'sasTestHarnessData': [dump_records_sas_test_harness_0,
dump_records_sas_test_harness_1]
}
# Create the actual config.
config = {
'initialCbsdRequestsWithDomainProxies': self.getEmptyCbsdRequestsWithDomainProxies(2),
'initialCbsdRecords': [],
'iterationData': [iteration_config],
'sasTestHarnessConfigs': [sas_test_harness_0_config,
sas_test_harness_1_config],
'domainProxyConfigs': [{
'cert': getCertFilename('domain_proxy.cert'),
'key': getCertFilename('domain_proxy.key')
}, {
'cert': getCertFilename('domain_proxy_1.cert'),
'key': getCertFilename('domain_proxy_1.key')}]
}
writeConfig(filename, config)