def do_upload(remote=None):
global plex_monitor_thread
lock_file = lock.upload()
if lock_file.is_locked():
log.info("Waiting for running upload to finish before proceeding...")
with lock_file:
log.info("Starting upload")
try:
# loop each supplied uploader config
for uploader_remote, uploader_config in conf.configs[
'uploader'].items():
# if remote is not None, skip this remote if it is not == remote
if remote and uploader_remote != remote:
continue
# retrieve rclone config for this remote
rclone_config = conf.configs['remotes'][uploader_remote]
# send notification that upload is starting
notify.send(
message="Upload of %d GB has begun for remote: %s" %
(path.get_size(rclone_config['upload_folder'],
uploader_config['size_excludes']),
uploader_remote))
# perform the upload
uploader = Uploader(uploader_remote, uploader_config,
rclone_config,
conf.configs['core']['dry_run'],
conf.configs['core']['rclone_config_path'],
conf.configs['plex']['enabled'])
# start the plex stream monitor before the upload begins if enabled
if conf.configs['plex'][
'enabled'] and plex_monitor_thread is None:
plex_monitor_thread = thread.start(do_plex_monitor,
'plex-monitor')
resp, resp_trigger = uploader.upload()
if resp:
# non 0 result indicates a trigger was met, the result is how many hours to sleep this remote for
log.info(
"Upload aborted due to trigger: %r being met, %s will continue automatic uploading normally in "
"%d hours", resp_trigger, uploader_remote, resp)
# add remote to uploader_delay
uploader_delay[uploader_remote] = time.time() + (
(60 * 60) * resp)
# send aborted upload notification
notify.send(
message=
"Upload was aborted for remote: %s due to trigger %r. Uploads suspended for %d hours"
% (uploader_remote, resp_trigger, resp))
else:
# send successful upload notification
notify.send(
message=
"Upload was completed successfully for remote: %s" %
uploader_remote)
# remove leftover empty directories from disk
if not conf.configs['core']['dry_run']:
uploader.remove_empty_dirs()
except Exception:
log.exception("Exception occurred while uploading: ")
log.info("Finished upload")
def do_upload(remote=None):
global plex_monitor_thread, uploader_delay
global sa_delay
nzbget = None
nzbget_paused = False
lock_file = lock.upload()
if lock_file.is_locked():
log.info("Waiting for running upload to finish before proceeding...")
with lock_file:
log.info("Starting upload")
try:
# loop each supplied uploader config
for uploader_remote, uploader_config in conf.configs[
'uploader'].items():
# if remote is not None, skip this remote if it is not == remote
if remote and uploader_remote != remote:
continue
# retrieve rclone config for this remote
rclone_config = conf.configs['remotes'][uploader_remote]
# send notification that upload is starting
notify.send(
message="Upload of %d GB has begun for remote: %s" %
(path.get_size(rclone_config['upload_folder'],
uploader_config['size_excludes']),
uploader_remote))
# start the plex stream monitor before the upload begins, if enabled
if conf.configs['plex'][
'enabled'] and plex_monitor_thread is None:
plex_monitor_thread = thread.start(do_plex_monitor,
'plex-monitor')
# pause the nzbget queue before starting the upload, if enabled
if conf.configs['nzbget']['enabled']:
nzbget = Nzbget(conf.configs['nzbget']['url'])
if nzbget.pause_queue():
nzbget_paused = True
log.info(
"Paused the Nzbget download queue, upload commencing!"
)
else:
log.error(
"Failed to pause the Nzbget download queue, upload commencing anyway..."
)
uploader = Uploader(uploader_remote, uploader_config,
rclone_config,
conf.configs['core']['dry_run'],
conf.configs['core']['rclone_binary_path'],
conf.configs['core']['rclone_config_path'],
conf.configs['plex']['enabled'])
if sa_delay[uploader_remote] is not None:
available_accounts = [
account for account, last_ban_time in
sa_delay[uploader_remote].items()
if last_ban_time is None
]
if len(available_accounts):
available_accounts.sort()
log.info("The following accounts are available: %s",
str(available_accounts))
# If there are no service accounts available, do not even bother attemping the upload
if len(available_accounts) == 0:
log.info(
"Upload aborted due to the fact that no service accounts "
"are currently unbanned and available to use for remote %s",
uploader_remote)
# add remote to uploader_delay
time_till_unban = misc.get_lowest_remaining_time(
sa_delay[uploader_remote])
log.info("Lowest Remaining time till unban is %d",
time_till_unban)
uploader_delay[uploader_remote] = time_till_unban
else:
for i in range(0, len(available_accounts)):
uploader.set_service_account(available_accounts[i])
resp, resp_trigger = uploader.upload()
if resp:
current_data = sa_delay[uploader_remote]
current_data[
available_accounts[i]] = time.time() + (
(60 * 60) * resp)
sa_delay[uploader_remote] = current_data
log.debug(
"Setting account %s as unbanned at %f",
available_accounts[i],
sa_delay[uploader_remote][
available_accounts[i]])
if i != (len(available_accounts) - 1):
log.info(
"Upload aborted due to trigger: %r being met, "
"%s is cycling to service_account file: %r",
resp_trigger, uploader_remote,
available_accounts[i + 1])
# Set unban time for current service account
log.debug(
"Setting service account %s as banned for remote: %s",
available_accounts[i], uploader_remote)
continue
else:
# non 0 result indicates a trigger was met, the result is how many hours
# to sleep this remote for
# Before banning remote, check that a service account did not become unbanned during upload
check_suspended_sa(
sa_delay[uploader_remote])
unbanTime = misc.get_lowest_remaining_time(
sa_delay[uploader_remote])
if unbanTime is not None:
log.info(
"Upload aborted due to trigger: %r being met, %s will continue automatic "
"uploading normally in %d hours",
resp_trigger, uploader_remote,
resp)
# add remote to uploader_delay
log.debug(
"Adding unban time for %s as %f",
uploader_remote,
misc.get_lowest_remaining_time(
sa_delay[uploader_remote]))
uploader_delay[
uploader_remote] = misc.get_lowest_remaining_time(
sa_delay[uploader_remote])
# send aborted upload notification
notify.send(
message=
"Upload was aborted for remote: %s due to trigger %r. "
"Uploads suspended for %d hours" %
(uploader_remote, resp_trigger,
resp))
else:
# send successful upload notification
notify.send(
message=
"Upload was completed successfully for remote: %s"
% uploader_remote)
# Remove ban for service account
sa_delay[uploader_remote][
available_accounts[i]] = None
break
else:
resp, resp_trigger = uploader.upload()
if resp:
if uploader_remote not in uploader_delay:
# this uploader was not already in the delay dict, so lets put it there
log.info(
"Upload aborted due to trigger: %r being met, %s will continue automatic uploading "
"normally in %d hours", resp_trigger,
uploader_remote, resp)
# add remote to uploader_delay
uploader_delay[uploader_remote] = time.time() + (
(60 * 60) * resp)
# send aborted upload notification
notify.send(
message=
"Upload was aborted for remote: %s due to trigger %r. Uploads suspended for %d"
" hours" %
(uploader_remote, resp_trigger, resp))
else:
# this uploader is already in the delay dict, lets not delay it any further
log.info(
"Upload aborted due to trigger: %r being met for %s uploader",
resp_trigger, uploader_remote)
# send aborted upload notification
notify.send(
message=
"Upload was aborted for remote: %s due to trigger %r."
% (uploader_remote, resp_trigger))
else:
log.info(
"Upload completed successfully for uploader: %s",
uploader_remote)
# send successful upload notification
notify.send(
message=
"Upload was completed successfully for remote: %s"
% uploader_remote)
# remove uploader from uploader_delays (as its no longer banned)
if uploader_remote in uploader_delay and uploader_delay.pop(
uploader_remote, None) is not None:
# this uploader was in the delay dict, but upload was successful, lets remove it
log.info(
"%s is no longer suspended due to a previous aborted upload!",
uploader_remote)
# remove leftover empty directories from disk
if not conf.configs['core']['dry_run']:
uploader.remove_empty_dirs()
# resume the nzbget queue, if enabled
if conf.configs['nzbget'][
'enabled'] and nzbget is not None and nzbget_paused:
if nzbget.resume_queue():
nzbget_paused = False
log.info("Resumed the Nzbget download queue!")
else:
log.error(
"Failed to resume the Nzbget download queue??")
except Exception:
log.exception("Exception occurred while uploading: ")
log.info("Finished upload")