# Start the VM and check status.
vm.start()
if status_error:
raise error.TestFail("VM started unexpectedly.")
if not check_in_vm(vm, device_target):
raise error.TestFail("Check encryption disk in VM failed")
except virt_vm.VMStartError, e:
if status_error:
logging.debug("VM failed to start as expected."
"Error: %s" % str(e))
pass
else:
raise error.TestFail("VM failed to start."
"Error: %s" % str(e))
finally:
# Recover VM.
if vm.is_alive():
vm.destroy(gracefully=False)
logging.info("Restoring vm...")
vmxml_backup.sync()
# Clean up pool, vol
for i in sec_uuid:
virsh.secret_undefine(i, **virsh_dargs)
virsh.vol_delete(volume_name, pool_name, **virsh_dargs)
if virsh.pool_state_dict().has_key(pool_name):
virsh.pool_destroy(pool_name, **virsh_dargs)
virsh.pool_undefine(pool_name, **virsh_dargs)
def run(test, params, env):
"""
Test disk encryption option.
1.Prepare test environment,destroy or suspend a VM.
2.Prepare pool, volume.
3.Edit disks xml and start the domain.
4.Perform test operation.
5.Recover test environment.
6.Confirm the test result.
"""
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
virsh_dargs = {'debug': True, 'ignore_status': True}
def create_pool(p_name, p_type, p_target):
"""
Define and start a pool.
:param p_name. Pool name.
:param p_type. Pool type.
:param p_target. Pool target path.
"""
p_xml = pool_xml.PoolXML(pool_type=p_type)
p_xml.name = p_name
p_xml.target_path = p_target
if not os.path.exists(p_target):
os.mkdir(p_target)
p_xml.xmltreefile.write()
ret = virsh.pool_define(p_xml.xml, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_build(p_name, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_start(p_name, **virsh_dargs)
libvirt.check_exit_status(ret)
def create_vol(p_name, target_encrypt_params, vol_params):
"""
Create volume.
:param p_name. Pool name.
:param target_encrypt_params encrypt parameters in dict.
:param vol_params. Volume parameters dict.
:return: True if create successfully.
"""
# Clean up dirty volumes if pool has.
pv = libvirt_storage.PoolVolume(p_name)
vol_name_list = pv.list_volumes()
for vol_name in vol_name_list:
pv.delete_volume(vol_name)
volxml = vol_xml.VolXML()
v_xml = volxml.new_vol(**vol_params)
v_xml.encryption = volxml.new_encryption(**target_encrypt_params)
v_xml.xmltreefile.write()
ret = virsh.vol_create(p_name, v_xml.xml, **virsh_dargs)
libvirt.check_exit_status(ret)
def create_secret(vol_path):
"""
Create secret.
:param vol_path. volume path.
:return: secret id if create successfully.
"""
sec_xml = secret_xml.SecretXML("no", "yes")
sec_xml.description = "volume secret"
sec_xml.usage = 'volume'
sec_xml.volume = vol_path
sec_xml.xmltreefile.write()
ret = virsh.secret_define(sec_xml.xml)
libvirt.check_exit_status(ret)
# Get secret uuid.
try:
encryption_uuid = re.findall(r".+\S+(\ +\S+)\ +.+\S+",
ret.stdout.strip())[0].lstrip()
except IndexError as e:
test.error("Fail to get newly created secret uuid")
logging.debug("Secret uuid %s", encryption_uuid)
# Set secret value.
encoding = locale.getpreferredencoding()
secret_string = base64.b64encode(
secret_password_no_encoded.encode(encoding)).decode(encoding)
ret = virsh.secret_set_value(encryption_uuid, secret_string,
**virsh_dargs)
libvirt.check_exit_status(ret)
return encryption_uuid
def get_secret_list():
"""
Get secret list.
:return: secret list
"""
logging.info("Get secret list ...")
secret_list = virsh.secret_list().stdout.strip().splitlines()
# First two lines contain table header followed by entries
# for each secret, such as:
#
# UUID Usage
# --------------------------------------------------------------------------------
# b4e8f6d3-100c-4e71-9f91-069f89742273 ceph client.libvirt secret
secret_list = secret_list[2:]
result = []
# If secret list is not empty.
if secret_list:
for line in secret_list:
# Split on whitespace, assume 1 column
linesplit = line.split(None, 1)
result.append(linesplit[0])
return result
def check_in_vm(vm, target, old_parts):
"""
Check mount/read/write disk in VM.
:param vm. VM guest.
:param target. Disk dev in VM.
:return: True if check successfully.
"""
try:
session = vm.wait_for_login()
rpm_stat = session.cmd_status(
"rpm -q parted || "
"yum install -y parted", 300)
if rpm_stat != 0:
test.fail("Failed to query/install parted, make sure"
" that you have usable repo in guest")
new_parts = utils_disk.get_parts_list(session)
added_parts = list(set(new_parts).difference(set(old_parts)))
logging.info("Added parts:%s", added_parts)
if len(added_parts) != 1:
logging.error("The number of new partitions is invalid in VM")
return False
added_part = None
if target.startswith("vd"):
if added_parts[0].startswith("vd"):
added_part = added_parts[0]
elif target.startswith("hd"):
if added_parts[0].startswith("sd"):
added_part = added_parts[0]
if not added_part:
logging.error("Can't see added partition in VM")
return False
device_source = os.path.join(os.sep, 'dev', added_part)
libvirt.mk_label(device_source, session=session)
libvirt.mk_part(device_source, size="10M", session=session)
# Run partprobe to make the change take effect.
process.run("partprobe", ignore_status=True, shell=True)
libvirt.mkfs("/dev/%s1" % added_part, "ext3", session=session)
cmd = ("mount /dev/%s1 /mnt && echo '123' > /mnt/testfile"
" && cat /mnt/testfile && umount /mnt" % added_part)
s, o = session.cmd_status_output(cmd)
logging.info("Check disk operation in VM:\n%s", o)
session.close()
if s != 0:
return False
return True
except (remote.LoginError, virt_vm.VMError, aexpect.ShellError) as e:
logging.error(str(e))
return False
# Disk specific attributes.
device = params.get("virt_disk_device", "disk")
device_target = params.get("virt_disk_device_target", "vdd")
device_type = params.get("virt_disk_device_type", "file")
device_bus = params.get("virt_disk_device_bus", "virtio")
encryption_in_source = "yes" == params.get("encryption_in_source")
encryption_out_source = "yes" == params.get("encryption_out_source")
if encryption_in_source and not libvirt_version.version_compare(3, 9, 0):
test.cancel("Cannot put <encryption> inside disk <source> in "
"this libvirt version.")
# Pool/Volume options.
pool_name = params.get("pool_name")
pool_type = params.get("pool_type")
pool_target = params.get("pool_target")
volume_name = params.get("vol_name")
volume_alloc = params.get("vol_alloc")
volume_cap_unit = params.get("vol_cap_unit")
volume_cap = params.get("vol_cap")
volume_target_path = params.get("target_path")
volume_target_format = params.get("target_format")
volume_target_encypt = params.get("target_encypt", "")
volume_target_label = params.get("target_label")
hotplug = "yes" == params.get("virt_disk_device_hotplug")
status_error = "yes" == params.get("status_error")
secret_type = params.get("secret_type", "passphrase")
secret_password_no_encoded = params.get("secret_password_no_encoded",
"redhat")
virt_disk_qcow2_format = "yes" == params.get("virt_disk_qcow2_format")
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
# Start vm and get all partions in vm.
if vm.is_dead():
vm.start()
session = vm.wait_for_login()
old_parts = utils_disk.get_parts_list(session)
session.close()
vm.destroy(gracefully=False)
# Back up xml file.
vmxml_backup = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
sec_encryption_uuid = None
try:
# Prepare the disk.
sec_uuids = []
# Clean up dirty secrets in test environments if there are.
dirty_secret_list = get_secret_list()
if dirty_secret_list:
for dirty_secret_uuid in dirty_secret_list:
virsh.secret_undefine(dirty_secret_uuid)
create_pool(pool_name, pool_type, pool_target)
vol_params = {
"name": volume_name,
"capacity": int(volume_cap),
"allocation": int(volume_alloc),
"format": volume_target_format,
"path": volume_target_path,
"label": volume_target_label,
"capacity_unit": volume_cap_unit
}
vol_encryption_params = {}
vol_encryption_params.update({"format": volume_target_encypt})
# For any disk format other than qcow2, it need create secret firstly.
if not virt_disk_qcow2_format:
# create secret.
sec_encryption_uuid = create_secret(volume_target_path)
sec_uuids.append(sec_encryption_uuid)
vol_encryption_params.update(
{"secret": {
"type": secret_type,
"uuid": sec_encryption_uuid
}})
try:
# If Libvirt version is lower than 2.5.0
# Creating luks encryption volume is not supported,so skip it.
create_vol(pool_name, vol_encryption_params, vol_params)
except AssertionError as info:
err_msgs = ("create: invalid option")
if str(info).count(err_msgs):
test.error("Creating luks encryption volume "
"is not supported on this libvirt version")
else:
test.error("Failed to create volume." "Error: %s" % str(info))
# Add disk xml.
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
disk_xml = Disk(type_name=device_type)
disk_xml.device = device
if device_type == "file":
dev_attrs = "file"
elif device_type == "dir":
dev_attrs = "dir"
else:
dev_attrs = "dev"
disk_source = disk_xml.new_disk_source(
**{"attrs": {
dev_attrs: volume_target_path
}})
disk_xml.driver = {
"name": "qemu",
"type": volume_target_format,
"cache": "none"
}
disk_xml.target = {"dev": device_target, "bus": device_bus}
v_xml = vol_xml.VolXML.new_from_vol_dumpxml(volume_name, pool_name)
sec_uuids.append(v_xml.encryption.secret["uuid"])
if not status_error:
logging.debug("vol info -- format: %s, type: %s, uuid: %s",
v_xml.encryption.format,
v_xml.encryption.secret["type"],
v_xml.encryption.secret["uuid"])
encryption_dict = {
"encryption": v_xml.encryption.format,
"secret": {
"type": v_xml.encryption.secret["type"],
"uuid": v_xml.encryption.secret["uuid"]
}
}
if encryption_in_source:
disk_source.encryption = disk_xml.new_encryption(
**encryption_dict)
if encryption_out_source:
disk_xml.encryption = disk_xml.new_encryption(
**encryption_dict)
disk_xml.source = disk_source
logging.debug("disk xml is:\n%s" % disk_xml)
if not hotplug:
# Sync VM xml.
vmxml.add_device(disk_xml)
vmxml.sync()
try:
# Start the VM and do disk hotplug if required,
# then check disk status in vm.
# Note that LUKS encrypted virtual disk without <encryption>
# can be normally started or attached since qemu will just treat
# it as RAW, so we don't test LUKS with status_error=TRUE.
vm.start()
vm.wait_for_login()
if status_error:
if hotplug:
logging.debug("attaching disk, expecting error...")
result = virsh.attach_device(vm_name, disk_xml.xml)
libvirt.check_exit_status(result, status_error)
else:
test.fail("VM started unexpectedly.")
else:
if hotplug:
result = virsh.attach_device(vm_name,
disk_xml.xml,
debug=True)
libvirt.check_exit_status(result)
if not check_in_vm(vm, device_target, old_parts):
test.fail("Check encryption disk in VM failed")
result = virsh.detach_device(vm_name,
disk_xml.xml,
debug=True)
libvirt.check_exit_status(result)
else:
if not check_in_vm(vm, device_target, old_parts):
test.fail("Check encryption disk in VM failed")
except virt_vm.VMStartError as e:
if status_error:
if hotplug:
test.fail(
"In hotplug scenario, VM should "
"start successfully but not."
"Error: %s", str(e))
else:
logging.debug(
"VM failed to start as expected."
"Error: %s", str(e))
else:
# Libvirt2.5.0 onward,AES-CBC encrypted qcow2 images is no
# longer supported.
err_msgs = ("AES-CBC encrypted qcow2 images is"
" no longer supported in system emulators")
if str(e).count(err_msgs):
test.cancel(err_msgs)
else:
test.fail("VM failed to start." "Error: %s" % str(e))
finally:
# Recover VM.
if vm.is_alive():
vm.destroy(gracefully=False)
logging.info("Restoring vm...")
vmxml_backup.sync()
# Clean up pool, vol
for sec_uuid in set(sec_uuids):
virsh.secret_undefine(sec_uuid, **virsh_dargs)
virsh.vol_delete(volume_name, pool_name, **virsh_dargs)
if pool_name in virsh.pool_state_dict():
virsh.pool_destroy(pool_name, **virsh_dargs)
virsh.pool_undefine(pool_name, **virsh_dargs)
def run(test, params, env):
"""
Test rbd disk device.
1.Prepare test environment,destroy or suspend a VM.
2.Prepare disk image.
3.Edit disks xml and start the domain.
4.Perform test operation.
5.Recover test environment.
"""
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
virsh_dargs = {'debug': True, 'ignore_status': True}
additional_xml_file = os.path.join(data_dir.get_tmp_dir(),
"additional_disk.xml")
def config_ceph():
"""
Write the configs to the file.
"""
src_host = disk_src_host.split()
src_port = disk_src_port.split()
conf_str = "mon_host = "
hosts = []
for host, port in zip(src_host, src_port):
hosts.append("%s:%s" % (host, port))
with open(disk_src_config, 'w') as f:
f.write(conf_str + ','.join(hosts) + '\n')
def create_pool():
"""
Define and start a pool.
"""
sp = libvirt_storage.StoragePool()
if create_by_xml:
p_xml = pool_xml.PoolXML(pool_type=pool_type)
p_xml.name = pool_name
s_xml = pool_xml.SourceXML()
s_xml.vg_name = disk_src_pool
source_host = []
for (host_name, host_port) in zip(disk_src_host.split(),
disk_src_port.split()):
source_host.append({'name': host_name, 'port': host_port})
s_xml.hosts = source_host
if auth_type:
s_xml.auth_type = auth_type
if auth_user:
s_xml.auth_username = auth_user
if auth_usage:
s_xml.secret_usage = auth_usage
p_xml.source = s_xml
logging.debug("Pool xml: %s", p_xml)
p_xml.xmltreefile.write()
ret = virsh.pool_define(p_xml.xml, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_build(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_start(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
else:
auth_opt = ""
if client_name and client_key:
auth_opt = (
"--auth-type %s --auth-username %s --secret-usage '%s'" %
(auth_type, auth_user, auth_usage))
if not sp.define_rbd_pool(
pool_name, mon_host, disk_src_pool, extra=auth_opt):
test.fail("Failed to define storage pool")
if not sp.build_pool(pool_name):
test.fail("Failed to build storage pool")
if not sp.start_pool(pool_name):
test.fail("Failed to start storage pool")
# Check pool operation
ret = virsh.pool_refresh(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_uuid(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
# pool-info
pool_info = sp.pool_info(pool_name)
if pool_info["Autostart"] != 'no':
test.fail("Failed to check pool information")
# pool-autostart
if not sp.set_pool_autostart(pool_name):
test.fail("Failed to set pool autostart")
pool_info = sp.pool_info(pool_name)
if pool_info["Autostart"] != 'yes':
test.fail("Failed to check pool information")
# pool-autostart --disable
if not sp.set_pool_autostart(pool_name, "--disable"):
test.fail("Failed to set pool autostart")
# If port is not pre-configured, port value should not be hardcoded in pool information.
if "yes" == params.get("rbd_port", "no"):
if 'port' in virsh.pool_dumpxml(pool_name):
test.fail("port attribute should not be in pool information")
# find-storage-pool-sources-as
if "yes" == params.get("find_storage_pool_sources_as", "no"):
ret = virsh.find_storage_pool_sources_as("rbd", mon_host)
libvirt.check_result(ret, skip_if=unsupported_err)
def create_vol(vol_params):
"""
Create volume.
:param p_name. Pool name.
:param vol_params. Volume parameters dict.
:return: True if create successfully.
"""
pvt = libvirt.PoolVolumeTest(test, params)
if create_by_xml:
pvt.pre_vol_by_xml(pool_name, **vol_params)
else:
pvt.pre_vol(vol_name, None, '2G', None, pool_name)
def check_vol(vol_params):
"""
Check volume information.
"""
pv = libvirt_storage.PoolVolume(pool_name)
# Supported operation
if vol_name not in pv.list_volumes():
test.fail("Volume %s doesn't exist" % vol_name)
ret = virsh.vol_dumpxml(vol_name, pool_name)
libvirt.check_exit_status(ret)
# vol-info
if not pv.volume_info(vol_name):
test.fail("Can't see volume info")
# vol-key
ret = virsh.vol_key(vol_name, pool_name)
libvirt.check_exit_status(ret)
if "%s/%s" % (disk_src_pool, vol_name) not in ret.stdout.strip():
test.fail("Volume key isn't correct")
# vol-path
ret = virsh.vol_path(vol_name, pool_name)
libvirt.check_exit_status(ret)
if "%s/%s" % (disk_src_pool, vol_name) not in ret.stdout.strip():
test.fail("Volume path isn't correct")
# vol-pool
ret = virsh.vol_pool("%s/%s" % (disk_src_pool, vol_name))
libvirt.check_exit_status(ret)
if pool_name not in ret.stdout.strip():
test.fail("Volume pool isn't correct")
# vol-name
ret = virsh.vol_name("%s/%s" % (disk_src_pool, vol_name))
libvirt.check_exit_status(ret)
if vol_name not in ret.stdout.strip():
test.fail("Volume name isn't correct")
# vol-resize
ret = virsh.vol_resize(vol_name, "2G", pool_name)
libvirt.check_exit_status(ret)
# Not supported operation
# vol-clone
ret = virsh.vol_clone(vol_name, cloned_vol_name, pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
# vol-create-from
volxml = vol_xml.VolXML()
vol_params.update({"name": "%s" % create_from_cloned_volume})
v_xml = volxml.new_vol(**vol_params)
v_xml.xmltreefile.write()
ret = virsh.vol_create_from(pool_name, v_xml.xml, vol_name, pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
# vol-wipe
ret = virsh.vol_wipe(vol_name, pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
# vol-upload
ret = virsh.vol_upload(vol_name,
vm.get_first_disk_devices()['source'],
"--pool %s" % pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
# vol-download
ret = virsh.vol_download(vol_name, cloned_vol_name,
"--pool %s" % pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
def check_qemu_cmd():
"""
Check qemu command line options.
"""
cmd = ("ps -ef | grep %s | grep -v grep " % vm_name)
process.run(cmd, shell=True)
if disk_src_name:
cmd += " | grep file=rbd:%s:" % disk_src_name
if auth_user and auth_key:
cmd += ('id=%s:auth_supported=cephx' % auth_user)
if disk_src_config:
cmd += " | grep 'conf=%s'" % disk_src_config
elif mon_host:
hosts = '\:6789\;'.join(mon_host.split())
cmd += " | grep 'mon_host=%s'" % hosts
if driver_iothread:
cmd += " | grep iothread%s" % driver_iothread
# Run the command
process.run(cmd, shell=True)
def check_save_restore():
"""
Test save and restore operation
"""
save_file = os.path.join(data_dir.get_tmp_dir(), "%s.save" % vm_name)
ret = virsh.save(vm_name, save_file, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.restore(save_file, **virsh_dargs)
libvirt.check_exit_status(ret)
if os.path.exists(save_file):
os.remove(save_file)
# Login to check vm status
vm.wait_for_login().close()
def check_snapshot(snap_option, target_dev='vda'):
"""
Test snapshot operation.
"""
snap_name = "s1"
snap_mem = os.path.join(data_dir.get_tmp_dir(), "rbd.mem")
snap_disk = os.path.join(data_dir.get_tmp_dir(), "rbd.disk")
xml_snap_exp = [
"disk name='%s' snapshot='external' type='file'" % target_dev
]
xml_dom_exp = [
"source file='%s'" % snap_disk,
"backingStore type='network' index='1'",
"source protocol='rbd' name='%s'" % disk_src_name
]
if snap_option.count("disk-only"):
options = ("%s --diskspec %s,file=%s --disk-only" %
(snap_name, target_dev, snap_disk))
elif snap_option.count("disk-mem"):
options = ("%s --memspec file=%s --diskspec %s,file="
"%s" % (snap_name, snap_mem, target_dev, snap_disk))
xml_snap_exp.append("memory snapshot='external' file='%s'" %
snap_mem)
else:
options = snap_name
ret = virsh.snapshot_create_as(vm_name, options)
if test_disk_internal_snapshot or test_disk_readonly:
libvirt.check_result(ret, expected_fails=unsupported_err)
else:
libvirt.check_result(ret, skip_if=unsupported_err)
# check xml file.
if not ret.exit_status:
snap_xml = virsh.snapshot_dumpxml(vm_name, snap_name,
debug=True).stdout.strip()
dom_xml = virsh.dumpxml(vm_name, debug=True).stdout.strip()
# Delete snapshots.
libvirt.clean_up_snapshots(vm_name)
if os.path.exists(snap_mem):
os.remove(snap_mem)
if os.path.exists(snap_disk):
os.remove(snap_disk)
if not all([x in snap_xml for x in xml_snap_exp]):
test.fail("Failed to check snapshot xml")
if not all([x in dom_xml for x in xml_dom_exp]):
test.fail("Failed to check domain xml")
def check_blockcopy(target):
"""
Block copy operation test.
"""
blk_file = os.path.join(data_dir.get_tmp_dir(), "blk.rbd")
if os.path.exists(blk_file):
os.remove(blk_file)
blk_mirror = ("mirror type='file' file='%s' "
"format='raw' job='copy'" % blk_file)
# Do blockcopy
ret = virsh.blockcopy(vm_name, target, blk_file)
libvirt.check_result(ret, skip_if=unsupported_err)
dom_xml = virsh.dumpxml(vm_name, debug=True).stdout.strip()
if not dom_xml.count(blk_mirror):
test.fail("Can't see block job in domain xml")
# Abort
ret = virsh.blockjob(vm_name, target, "--abort")
libvirt.check_exit_status(ret)
dom_xml = virsh.dumpxml(vm_name, debug=True).stdout.strip()
if dom_xml.count(blk_mirror):
test.fail("Failed to abort block job")
if os.path.exists(blk_file):
os.remove(blk_file)
# Sleep for a while after abort operation.
time.sleep(5)
# Do blockcopy again
ret = virsh.blockcopy(vm_name, target, blk_file)
libvirt.check_exit_status(ret)
# Wait for complete
def wait_func():
ret = virsh.blockjob(vm_name, target, "--info")
return ret.stderr.count("Block Copy: [100 %]")
timeout = params.get("blockjob_timeout", 600)
utils_misc.wait_for(wait_func, int(timeout))
# Pivot
ret = virsh.blockjob(vm_name, target, "--pivot")
libvirt.check_exit_status(ret)
dom_xml = virsh.dumpxml(vm_name, debug=True).stdout.strip()
if not dom_xml.count("source file='%s'" % blk_file):
test.fail("Failed to pivot block job")
# Remove the disk file.
if os.path.exists(blk_file):
os.remove(blk_file)
def check_in_vm(vm_obj, target, old_parts, read_only=False):
"""
Check mount/read/write disk in VM.
:param vm. VM guest.
:param target. Disk dev in VM.
:return: True if check successfully.
"""
try:
session = vm_obj.wait_for_login()
new_parts = utils_disk.get_parts_list(session)
added_parts = list(set(new_parts).difference(set(old_parts)))
logging.info("Added parts:%s", added_parts)
if len(added_parts) != 1:
logging.error("The number of new partitions is invalid in VM")
return False
added_part = None
if target.startswith("vd"):
if added_parts[0].startswith("vd"):
added_part = added_parts[0]
elif target.startswith("hd"):
if added_parts[0].startswith("sd"):
added_part = added_parts[0]
if not added_part:
logging.error("Can't see added partition in VM")
return False
cmd = ("mount /dev/{0} /mnt && ls /mnt && (sleep 15;"
" touch /mnt/testfile; umount /mnt)".format(added_part))
s, o = session.cmd_status_output(cmd, timeout=60)
session.close()
logging.info("Check disk operation in VM:\n, %s, %s", s, o)
# Readonly fs, check the error messages.
# The command may return True, read-only
# messges can be found from the command output
if read_only:
if "Read-only file system" not in o:
return False
else:
return True
# Other errors
if s != 0:
return False
return True
except (remote.LoginError, virt_vm.VMError, aexpect.ShellError) as e:
logging.error(str(e))
return False
def clean_up_volume_snapshots():
"""
Get all snapshots for rbd_vol.img volume,unprotect and then clean up them.
"""
cmd = ("rbd -m {0} {1} info {2}"
"".format(mon_host, key_opt,
os.path.join(disk_src_pool, vol_name)))
if process.run(cmd, ignore_status=True, shell=True).exit_status:
return
# Get snapshot list.
cmd = ("rbd -m {0} {1} snap"
" list {2}"
"".format(mon_host, key_opt,
os.path.join(disk_src_pool, vol_name)))
snaps_out = process.run(cmd, ignore_status=True,
shell=True).stdout_text
snap_names = []
if snaps_out:
for line in snaps_out.rsplit("\n"):
if line.startswith("SNAPID") or line == "":
continue
snap_line = line.rsplit()
if len(snap_line) == 4:
snap_names.append(snap_line[1])
logging.debug("Find snapshots: %s", snap_names)
# Unprotect snapshot first,otherwise it will fail to purge volume
for snap_name in snap_names:
cmd = ("rbd -m {0} {1} snap"
" unprotect {2}@{3}"
"".format(mon_host, key_opt,
os.path.join(disk_src_pool, vol_name),
snap_name))
process.run(cmd, ignore_status=True, shell=True)
# Purge volume,and then delete volume.
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} snap"
" purge {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt,
os.path.join(disk_src_pool, vol_name)))
process.run(cmd, ignore_status=True, shell=True)
def make_snapshot():
"""
make external snapshots.
:return external snapshot path list
"""
logging.info("Making snapshot...")
first_disk_source = vm.get_first_disk_devices()['source']
snapshot_path_list = []
snapshot2_file = os.path.join(data_dir.get_tmp_dir(), "mem.s2")
snapshot3_file = os.path.join(data_dir.get_tmp_dir(), "mem.s3")
snapshot4_file = os.path.join(data_dir.get_tmp_dir(), "mem.s4")
snapshot4_disk_file = os.path.join(data_dir.get_tmp_dir(), "disk.s4")
snapshot5_file = os.path.join(data_dir.get_tmp_dir(), "mem.s5")
snapshot5_disk_file = os.path.join(data_dir.get_tmp_dir(), "disk.s5")
# Attempt to take different types of snapshots.
snapshots_param_dict = {
"s1":
"s1 --disk-only --no-metadata",
"s2":
"s2 --memspec %s --no-metadata" % snapshot2_file,
"s3":
"s3 --memspec %s --no-metadata --live" % snapshot3_file,
"s4":
"s4 --memspec %s --diskspec vda,file=%s --no-metadata" %
(snapshot4_file, snapshot4_disk_file),
"s5":
"s5 --memspec %s --diskspec vda,file=%s --live --no-metadata" %
(snapshot5_file, snapshot5_disk_file)
}
for snapshot_name in sorted(snapshots_param_dict.keys()):
ret = virsh.snapshot_create_as(vm_name,
snapshots_param_dict[snapshot_name],
**virsh_dargs)
libvirt.check_exit_status(ret)
if snapshot_name != 's4' and snapshot_name != 's5':
snapshot_path_list.append(
first_disk_source.replace('qcow2', snapshot_name))
return snapshot_path_list
def get_secret_list():
"""
Get secret list.
:return secret list
"""
logging.info("Get secret list ...")
secret_list_result = virsh.secret_list()
secret_list = results_stdout_52lts(
secret_list_result).strip().splitlines()
# First two lines contain table header followed by entries
# for each secret, such as:
#
# UUID Usage
# --------------------------------------------------------------------------------
# b4e8f6d3-100c-4e71-9f91-069f89742273 ceph client.libvirt secret
secret_list = secret_list[2:]
result = []
# If secret list is empty.
if secret_list:
for line in secret_list:
# Split on whitespace, assume 1 column
linesplit = line.split(None, 1)
result.append(linesplit[0])
return result
mon_host = params.get("mon_host")
disk_src_name = params.get("disk_source_name")
disk_src_config = params.get("disk_source_config")
disk_src_host = params.get("disk_source_host")
disk_src_port = params.get("disk_source_port")
disk_src_pool = params.get("disk_source_pool")
disk_format = params.get("disk_format", "raw")
driver_iothread = params.get("driver_iothread")
snap_name = params.get("disk_snap_name")
attach_device = "yes" == params.get("attach_device", "no")
attach_disk = "yes" == params.get("attach_disk", "no")
test_save_restore = "yes" == params.get("test_save_restore", "no")
test_snapshot = "yes" == params.get("test_snapshot", "no")
test_blockcopy = "yes" == params.get("test_blockcopy", "no")
test_qemu_cmd = "yes" == params.get("test_qemu_cmd", "no")
test_vm_parts = "yes" == params.get("test_vm_parts", "no")
additional_guest = "yes" == params.get("additional_guest", "no")
create_snapshot = "yes" == params.get("create_snapshot", "no")
convert_image = "yes" == params.get("convert_image", "no")
create_volume = "yes" == params.get("create_volume", "no")
create_by_xml = "yes" == params.get("create_by_xml", "no")
client_key = params.get("client_key")
client_name = params.get("client_name")
auth_key = params.get("auth_key")
auth_user = params.get("auth_user")
auth_type = params.get("auth_type")
auth_usage = params.get("secret_usage")
pool_name = params.get("pool_name")
pool_type = params.get("pool_type")
vol_name = params.get("vol_name")
cloned_vol_name = params.get("cloned_volume", "cloned_test_volume")
create_from_cloned_volume = params.get("create_from_cloned_volume",
"create_from_cloned_test_volume")
vol_cap = params.get("vol_cap")
vol_cap_unit = params.get("vol_cap_unit")
start_vm = "yes" == params.get("start_vm", "no")
test_disk_readonly = "yes" == params.get("test_disk_readonly", "no")
test_disk_internal_snapshot = "yes" == params.get(
"test_disk_internal_snapshot", "no")
test_json_pseudo_protocol = "yes" == params.get("json_pseudo_protocol",
"no")
disk_snapshot_with_sanlock = "yes" == params.get(
"disk_internal_with_sanlock", "no")
auth_place_in_source = params.get("auth_place_in_source")
# Prepare a blank params to confirm if delete the configure at the end of the test
ceph_cfg = ""
# Create config file if it doesn't exist
ceph_cfg = ceph.create_config_file(mon_host)
# After libvirt 3.9.0, auth element can be put into source part.
if auth_place_in_source and not libvirt_version.version_compare(3, 9, 0):
test.cancel(
"place auth in source is not supported in current libvirt version")
# Start vm and get all partions in vm.
if vm.is_dead():
vm.start()
session = vm.wait_for_login()
old_parts = utils_disk.get_parts_list(session)
session.close()
vm.destroy(gracefully=False)
if additional_guest:
guest_name = "%s_%s" % (vm_name, '1')
timeout = params.get("clone_timeout", 360)
utils_libguestfs.virt_clone_cmd(vm_name,
guest_name,
True,
timeout=timeout,
ignore_status=False)
additional_vm = vm.clone(guest_name)
if start_vm:
virsh.start(guest_name)
# Back up xml file.
vmxml_backup = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
key_opt = ""
secret_uuid = None
snapshot_path = None
key_file = os.path.join(data_dir.get_tmp_dir(), "ceph.key")
img_file = os.path.join(data_dir.get_tmp_dir(), "%s_test.img" % vm_name)
front_end_img_file = os.path.join(data_dir.get_tmp_dir(),
"%s_frontend_test.img" % vm_name)
# Construct a unsupported error message list to skip these kind of tests
unsupported_err = []
if driver_iothread:
unsupported_err.append('IOThreads not supported')
if test_snapshot:
unsupported_err.append('live disk snapshot not supported')
if test_disk_readonly:
if not libvirt_version.version_compare(5, 0, 0):
unsupported_err.append('Could not create file: Permission denied')
unsupported_err.append('Permission denied')
else:
unsupported_err.append(
'unsupported configuration: external snapshot ' +
'for readonly disk vdb is not supported')
if test_disk_internal_snapshot:
unsupported_err.append(
'unsupported configuration: internal snapshot for disk ' +
'vdb unsupported for storage type raw')
if test_blockcopy:
unsupported_err.append('block copy is not supported')
if attach_disk:
unsupported_err.append('No such file or directory')
if create_volume:
unsupported_err.append("backing 'volume' disks isn't yet supported")
unsupported_err.append('this function is not supported')
try:
# Clean up dirty secrets in test environments if there have.
dirty_secret_list = get_secret_list()
if dirty_secret_list:
for dirty_secret_uuid in dirty_secret_list:
virsh.secret_undefine(dirty_secret_uuid)
# Prepare test environment.
qemu_config = LibvirtQemuConfig()
if disk_snapshot_with_sanlock:
# Install necessary package:sanlock,libvirt-lock-sanlock
if not utils_package.package_install(["sanlock"]):
test.error("fail to install sanlock")
if not utils_package.package_install(["libvirt-lock-sanlock"]):
test.error("fail to install libvirt-lock-sanlock")
# Set virt_use_sanlock
result = process.run("setsebool -P virt_use_sanlock 1", shell=True)
if result.exit_status:
test.error("Failed to set virt_use_sanlock value")
# Update lock_manager in qemu.conf
qemu_config.lock_manager = 'sanlock'
# Update qemu-sanlock.conf.
san_lock_config = LibvirtSanLockConfig()
san_lock_config.user = '******'
san_lock_config.group = 'sanlock'
san_lock_config.host_id = 1
san_lock_config.auto_disk_leases = True
process.run("mkdir -p /var/lib/libvirt/sanlock", shell=True)
san_lock_config.disk_lease_dir = "/var/lib/libvirt/sanlock"
san_lock_config.require_lease_for_disks = False
# Start sanlock service and restart libvirtd to enforce changes.
result = process.run("systemctl start wdmd", shell=True)
if result.exit_status:
test.error("Failed to start wdmd service")
result = process.run("systemctl start sanlock", shell=True)
if result.exit_status:
test.error("Failed to start sanlock service")
utils_libvirtd.Libvirtd().restart()
# Prepare lockspace and lease file for sanlock in order.
sanlock_cmd_dict = OrderedDict()
sanlock_cmd_dict[
"truncate -s 1M /var/lib/libvirt/sanlock/TEST_LS"] = "Failed to truncate TEST_LS"
sanlock_cmd_dict[
"sanlock direct init -s TEST_LS:0:/var/lib/libvirt/sanlock/TEST_LS:0"] = "Failed to sanlock direct init TEST_LS:0"
sanlock_cmd_dict[
"chown sanlock:sanlock /var/lib/libvirt/sanlock/TEST_LS"] = "Failed to chown sanlock TEST_LS"
sanlock_cmd_dict[
"restorecon -R -v /var/lib/libvirt/sanlock"] = "Failed to restorecon sanlock"
sanlock_cmd_dict[
"truncate -s 1M /var/lib/libvirt/sanlock/test-disk-resource-lock"] = "Failed to truncate test-disk-resource-lock"
sanlock_cmd_dict[
"sanlock direct init -r TEST_LS:test-disk-resource-lock:" +
"/var/lib/libvirt/sanlock/test-disk-resource-lock:0"] = "Failed to sanlock direct init test-disk-resource-lock"
sanlock_cmd_dict[
"chown sanlock:sanlock " +
"/var/lib/libvirt/sanlock/test-disk-resource-lock"] = "Failed to chown test-disk-resource-loc"
sanlock_cmd_dict[
"sanlock client add_lockspace -s TEST_LS:1:" +
"/var/lib/libvirt/sanlock/TEST_LS:0"] = "Failed to client add_lockspace -s TEST_LS:0"
for sanlock_cmd in sanlock_cmd_dict.keys():
result = process.run(sanlock_cmd, shell=True)
if result.exit_status:
test.error(sanlock_cmd_dict[sanlock_cmd])
# Create one lease device and add it to VM.
san_lock_vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
lease_device = Lease()
lease_device.lockspace = 'TEST_LS'
lease_device.key = 'test-disk-resource-lock'
lease_device.target = {
'path': '/var/lib/libvirt/sanlock/test-disk-resource-lock'
}
san_lock_vmxml.add_device(lease_device)
san_lock_vmxml.sync()
# Install ceph-common package which include rbd command
if utils_package.package_install(["ceph-common"]):
if client_name and client_key:
with open(key_file, 'w') as f:
f.write("[%s]\n\tkey = %s\n" % (client_name, client_key))
key_opt = "--keyring %s" % key_file
# Create secret xml
sec_xml = secret_xml.SecretXML("no", "no")
sec_xml.usage = auth_type
sec_xml.usage_name = auth_usage
sec_xml.xmltreefile.write()
logging.debug("Secret xml: %s", sec_xml)
ret = virsh.secret_define(sec_xml.xml)
libvirt.check_exit_status(ret)
secret_uuid = re.findall(r".+\S+(\ +\S+)\ +.+\S+",
ret.stdout.strip())[0].lstrip()
logging.debug("Secret uuid %s", secret_uuid)
if secret_uuid is None:
test.error("Failed to get secret uuid")
# Set secret value
auth_key = params.get("auth_key")
ret = virsh.secret_set_value(secret_uuid, auth_key,
**virsh_dargs)
libvirt.check_exit_status(ret)
# Delete the disk if it exists
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm "
"{2}".format(mon_host, key_opt, disk_src_name))
process.run(cmd, ignore_status=True, shell=True)
else:
test.error("Failed to install ceph-common")
if disk_src_config:
config_ceph()
disk_path = ("rbd:%s:mon_host=%s" % (disk_src_name, mon_host))
if auth_user and auth_key:
disk_path += (":id=%s:key=%s" % (auth_user, auth_key))
targetdev = params.get("disk_target", "vdb")
# To be compatible with create_disk_xml function,
# some parameters need to be updated.
params.update({
"type_name": params.get("disk_type", "network"),
"target_bus": params.get("disk_target_bus"),
"target_dev": targetdev,
"secret_uuid": secret_uuid,
"source_protocol": params.get("disk_source_protocol"),
"source_name": disk_src_name,
"source_host_name": disk_src_host,
"source_host_port": disk_src_port
})
# Prepare disk image
if convert_image:
first_disk = vm.get_first_disk_devices()
blk_source = first_disk['source']
# Convert the image to remote storage
disk_cmd = ("rbd -m %s %s info %s 2> /dev/null|| qemu-img convert"
" -O %s %s %s" % (mon_host, key_opt, disk_src_name,
disk_format, blk_source, disk_path))
process.run(disk_cmd, ignore_status=False, shell=True)
elif create_volume:
vol_params = {
"name": vol_name,
"capacity": int(vol_cap),
"capacity_unit": vol_cap_unit,
"format": disk_format
}
create_pool()
create_vol(vol_params)
check_vol(vol_params)
else:
# Create an local image and make FS on it.
disk_cmd = ("qemu-img create -f %s %s 10M && mkfs.ext4 -F %s" %
(disk_format, img_file, img_file))
process.run(disk_cmd, ignore_status=False, shell=True)
# Convert the image to remote storage
disk_cmd = (
"rbd -m %s %s info %s 2> /dev/null|| qemu-img convert -O"
" %s %s %s" % (mon_host, key_opt, disk_src_name, disk_format,
img_file, disk_path))
process.run(disk_cmd, ignore_status=False, shell=True)
# Create disk snapshot if needed.
if create_snapshot:
snap_cmd = ("rbd -m %s %s snap create %s@%s" %
(mon_host, key_opt, disk_src_name, snap_name))
process.run(snap_cmd, ignore_status=False, shell=True)
if test_json_pseudo_protocol:
# Create one frontend image with the rbd backing file.
json_str = ('json:{"file.driver":"rbd",'
'"file.filename":"rbd:%s:mon_host=%s"}' %
(disk_src_name, mon_host))
# pass different json string according to the auth config
if auth_user and auth_key:
json_str = ('%s:id=%s:key=%s"}' %
(json_str[:-2], auth_user, auth_key))
disk_cmd = ("qemu-img create -f qcow2 -b '%s' %s" %
(json_str, front_end_img_file))
disk_path = front_end_img_file
process.run(disk_cmd, ignore_status=False, shell=True)
# If hot plug, start VM first, and then wait the OS boot.
# Otherwise stop VM if running.
if start_vm:
if vm.is_dead():
vm.start()
vm.wait_for_login().close()
else:
if not vm.is_dead():
vm.destroy()
if attach_device:
if create_volume:
params.update({"source_pool": pool_name})
params.update({"type_name": "volume"})
# No need auth options for volume
if "auth_user" in params:
params.pop("auth_user")
if "auth_type" in params:
params.pop("auth_type")
if "secret_type" in params:
params.pop("secret_type")
if "secret_uuid" in params:
params.pop("secret_uuid")
if "secret_usage" in params:
params.pop("secret_usage")
# After 3.9.0,the auth element can be place in source part.
if auth_place_in_source:
params.update({"auth_in_source": auth_place_in_source})
xml_file = libvirt.create_disk_xml(params)
if additional_guest:
# Copy xml_file for additional guest VM.
shutil.copyfile(xml_file, additional_xml_file)
opts = params.get("attach_option", "")
ret = virsh.attach_device(vm_name,
xml_file,
flagstr=opts,
debug=True)
libvirt.check_result(ret, skip_if=unsupported_err)
if additional_guest:
# Make sure the additional VM is running
if additional_vm.is_dead():
additional_vm.start()
additional_vm.wait_for_login().close()
ret = virsh.attach_device(guest_name,
additional_xml_file,
"",
debug=True)
libvirt.check_result(ret, skip_if=unsupported_err)
elif attach_disk:
opts = params.get("attach_option", "")
ret = virsh.attach_disk(vm_name, disk_path, targetdev, opts)
libvirt.check_result(ret, skip_if=unsupported_err)
elif test_disk_readonly:
params.update({'readonly': "yes"})
xml_file = libvirt.create_disk_xml(params)
opts = params.get("attach_option", "")
ret = virsh.attach_device(vm_name,
xml_file,
flagstr=opts,
debug=True)
libvirt.check_result(ret, skip_if=unsupported_err)
elif test_disk_internal_snapshot:
xml_file = libvirt.create_disk_xml(params)
opts = params.get("attach_option", "")
ret = virsh.attach_device(vm_name,
xml_file,
flagstr=opts,
debug=True)
libvirt.check_result(ret, skip_if=unsupported_err)
elif disk_snapshot_with_sanlock:
if vm.is_dead():
vm.start()
snapshot_path = make_snapshot()
if vm.is_alive():
vm.destroy()
elif not create_volume:
libvirt.set_vm_disk(vm, params)
if test_blockcopy:
logging.info("Creating %s...", vm_name)
vmxml_for_test = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
if vm.is_alive():
vm.destroy(gracefully=False)
vm.undefine()
if virsh.create(vmxml_for_test.xml, **virsh_dargs).exit_status:
vmxml_backup.define()
test.fail("Can't create the domain")
elif vm.is_dead():
vm.start()
# Wait for vm is running
vm.wait_for_login(timeout=600).close()
if additional_guest:
if additional_vm.is_dead():
additional_vm.start()
# Check qemu command line
if test_qemu_cmd:
check_qemu_cmd()
# Check partitions in vm
if test_vm_parts:
if not check_in_vm(
vm, targetdev, old_parts, read_only=create_snapshot):
test.fail("Failed to check vm partitions")
if additional_guest:
if not check_in_vm(additional_vm, targetdev, old_parts):
test.fail("Failed to check vm partitions")
# Save and restore operation
if test_save_restore:
check_save_restore()
if test_snapshot:
snap_option = params.get("snapshot_option", "")
check_snapshot(snap_option)
if test_blockcopy:
check_blockcopy(targetdev)
if test_disk_readonly:
snap_option = params.get("snapshot_option", "")
check_snapshot(snap_option, 'vdb')
if test_disk_internal_snapshot:
snap_option = params.get("snapshot_option", "")
check_snapshot(snap_option, targetdev)
# Detach the device.
if attach_device:
xml_file = libvirt.create_disk_xml(params)
ret = virsh.detach_device(vm_name, xml_file)
libvirt.check_exit_status(ret)
if additional_guest:
ret = virsh.detach_device(guest_name, xml_file)
libvirt.check_exit_status(ret)
elif attach_disk:
ret = virsh.detach_disk(vm_name, targetdev)
libvirt.check_exit_status(ret)
# Check disk in vm after detachment.
if attach_device or attach_disk:
session = vm.wait_for_login()
new_parts = utils_disk.get_parts_list(session)
if len(new_parts) != len(old_parts):
test.fail("Disk still exists in vm" " after detachment")
session.close()
except virt_vm.VMStartError as details:
for msg in unsupported_err:
if msg in str(details):
test.cancel(str(details))
else:
test.fail("VM failed to start." "Error: %s" % str(details))
finally:
# Remove ceph configure file if created.
if ceph_cfg:
os.remove(ceph_cfg)
# Delete snapshots.
snapshot_lists = virsh.snapshot_list(vm_name)
if len(snapshot_lists) > 0:
libvirt.clean_up_snapshots(vm_name, snapshot_lists)
for snap in snapshot_lists:
virsh.snapshot_delete(vm_name, snap, "--metadata")
# Recover VM.
if vm.is_alive():
vm.destroy(gracefully=False)
if additional_guest:
virsh.remove_domain(guest_name,
"--remove-all-storage",
ignore_stauts=True)
# Remove the snapshot.
if create_snapshot:
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} snap"
" purge {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt, disk_src_name))
process.run(cmd, ignore_status=True, shell=True)
elif create_volume:
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt,
os.path.join(disk_src_pool, cloned_vol_name)))
process.run(cmd, ignore_status=True, shell=True)
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm {2}"
"".format(
mon_host, key_opt,
os.path.join(disk_src_pool, create_from_cloned_volume)))
process.run(cmd, ignore_status=True, shell=True)
clean_up_volume_snapshots()
else:
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt, disk_src_name))
process.run(cmd, ignore_status=True, shell=True)
# Delete tmp files.
if os.path.exists(key_file):
os.remove(key_file)
if os.path.exists(img_file):
os.remove(img_file)
# Clean up volume, pool
if vol_name and vol_name in str(virsh.vol_list(pool_name).stdout):
virsh.vol_delete(vol_name, pool_name)
if pool_name and pool_name in virsh.pool_state_dict():
virsh.pool_destroy(pool_name, **virsh_dargs)
virsh.pool_undefine(pool_name, **virsh_dargs)
# Clean up secret
secret_list = get_secret_list()
if secret_list:
for secret_uuid in secret_list:
virsh.secret_undefine(secret_uuid)
logging.info("Restoring vm...")
vmxml_backup.sync()
if disk_snapshot_with_sanlock:
# Restore virt_use_sanlock setting.
process.run("setsebool -P virt_use_sanlock 0", shell=True)
# Restore qemu config
qemu_config.restore()
utils_libvirtd.Libvirtd().restart()
# Force shutdown sanlock service.
process.run("sanlock client shutdown -f 1", shell=True)
# Clean up lockspace folder
process.run("rm -rf /var/lib/libvirt/sanlock/*", shell=True)
if snapshot_path is not None:
for snapshot in snapshot_path:
if os.path.exists(snapshot):
os.remove(snapshot)
# Start the VM and check status.
vm.start()
if status_error:
raise error.TestFail("VM started unexpectedly.")
if not check_in_vm(vm, device_target, old_parts):
raise error.TestFail("Check encryption disk in VM failed")
except virt_vm.VMStartError, e:
if status_error:
logging.debug("VM failed to start as expected."
"Error: %s" % str(e))
pass
else:
raise error.TestFail("VM failed to start."
"Error: %s" % str(e))
finally:
# Recover VM.
if vm.is_alive():
vm.destroy(gracefully=False)
logging.info("Restoring vm...")
vmxml_backup.sync()
# Clean up pool, vol
for i in sec_uuid:
virsh.secret_undefine(i, **virsh_dargs)
virsh.vol_delete(volume_name, pool_name, **virsh_dargs)
if virsh.pool_state_dict().has_key(pool_name):
virsh.pool_destroy(pool_name, **virsh_dargs)
virsh.pool_undefine(pool_name, **virsh_dargs)
def run(test, params, env):
"""
Test command: virsh pool-create.
Create a libvirt pool from an XML file.
1) Use xml file from test parameters to create pool.
2) Dump the exist pool to create pool.
3) Negatively create pool(invalid option, no file, invalid file, duplicate
pool name, and create pool under readonly mode).
"""
pool_xml = params.get("pool_create_xml_file")
pool_name = params.get("pool_create_name")
option = params.get("pool_create_extra_option", "")
use_exist_pool = "yes" == params.get("pool_create_use_exist_pool", "no")
exist_pool_name = params.get("pool_create_exist_pool_name", "default")
undefine_exist_pool = "yes" == params.get(
"pool_create_undefine_exist_pool", "no")
readonly_mode = "yes" == params.get("pool_create_readonly_mode", "no")
status_error = "yes" == params.get("status_error", "no")
exist_active = False
# Deal with each parameters
# backup the exist pool
pool_ins = libvirt_storage.StoragePool()
if use_exist_pool:
if not pool_ins.pool_exists(exist_pool_name):
raise error.TestFail("Require pool: %s exist", exist_pool_name)
backup_xml = libvirt_xml.PoolXML.backup_xml(exist_pool_name)
pool_xml = backup_xml
exist_active = pool_ins.is_pool_active(exist_pool_name)
# backup pool state
pool_ins_state = virsh.pool_state_dict()
logging.debug("Backed up pool(s): %s", pool_ins_state)
created_pool_path = False
if "--file" in option:
# As of commit id 'c5f6c685' in virt-install (v1.0.0), virt-install
# will attempt to create a storage pool for ease of management of
# volumes. Thus if the test was started with --install or by chance
# an 'images' pool exists using get_data_dir(), then the attempt
# to define/create this pool will fail since two pools cannot use
# the same path. Therefore, rather than use the data dir for our
# test, let's just use 'tmp' dir and create an images pool there.
pool_path = os.path.join(data_dir.get_tmp_dir(), 'images')
if not os.path.exists(pool_path):
os.mkdir(pool_path)
created_pool_path = True
dir_xml = """
<pool type='dir'>
<name>%s</name>
<target>
<path>%s</path>
</target>
</pool>
""" % (pool_name, pool_path)
pool_xml = os.path.join(test.tmpdir, pool_xml)
xml_object = open(pool_xml, 'w')
xml_object.write(dir_xml)
xml_object.close()
# Delete the exist pool
start_pool = False
if undefine_exist_pool:
poolxml = libvirt_xml.PoolXML.new_from_dumpxml(exist_pool_name)
poolxml.name = pool_name
pool_xml = poolxml.xml
if pool_ins.is_pool_active(exist_pool_name):
start_pool = True
if not pool_ins.delete_pool(exist_pool_name):
raise error.TestFail("Delete pool: %s fail", exist_pool_name)
# Create an invalid pool xml file
if pool_xml == "invalid-pool-xml":
tmp_xml = xml_utils.TempXMLFile()
tmp_xml.write('"<pool><<<BAD>>><\'XML</name\>'
'!@#$%^&*)>(}>}{CORRUPTE|>!</pool>')
tmp_xml.flush()
pool_xml = tmp_xml.name
logging.info(pool_xml)
# Readonly mode
ro_flag = False
if readonly_mode:
logging.debug("Readonly mode test")
ro_flag = True
# Run virsh test
if os.path.isfile(pool_xml):
logging.debug("Create pool from file:\n %s",
open(pool_xml, 'r').read())
try:
cmd_result = virsh.pool_create(pool_xml,
option,
ignore_status=True,
debug=True,
readonly=ro_flag)
err = cmd_result.stderr.strip()
status = cmd_result.exit_status
if not status_error:
if status:
raise error.TestFail(err)
elif not pool_check(pool_name, pool_ins):
raise error.TestFail("Pool check fail")
elif status_error and status == 0:
# For an inactive 'default' pool, when the test runs to create
# an existing pool of 'default', the test will pass because the
# 'default' pool will be considered a transient pool when the
# 'name' and 'uuid' match (which they do in this case). So
# don't fail the test unnecessarily
if (pool_name == exist_pool_name and not exist_active):
pass
else:
raise error.TestFail("Expect fail, but run successfully.")
finally:
# Recover env
# If we have a different pool name than default OR
# we need to undefine this tests created default pool OR
# we had a transient, active default pool created above, then
# we need to destroy what the test created.
# NB: When the active, transient pool is destroyed the
# previously defined, but inactive pool will now exist.
if pool_name != exist_pool_name or undefine_exist_pool or \
(pool_name == exist_pool_name and not exist_active):
virsh.pool_destroy(pool_name)
# restore the undefined default pool
if undefine_exist_pool: # and not pool_ins.pool_exists(exist_pool_name):
virsh.pool_define(backup_xml)
if start_pool:
pool_ins.start_pool(exist_pool_name)
# Recover autostart
if pool_ins_state[exist_pool_name]['autostart']:
virsh.pool_autostart(exist_pool_name, ignore_status=False)
# If we created the pool_path, then remove it
if created_pool_path:
os.rmdir(pool_path)
def run(test, params, env):
"""
Test command: virsh pool-create.
Create a libvirt pool from an XML file.
1) Use xml file from test parameters to create pool.
2) Dump the exist pool to create pool.
3) Negatively create pool(invalid option, no file, invalid file, duplicate
pool name, and create pool under readonly mode).
"""
pool_xml = params.get("pool_create_xml_file")
pool_name = params.get("pool_create_name")
option = params.get("pool_create_extra_option", "")
use_exist_pool = "yes" == params.get("pool_create_use_exist_pool", "no")
exist_pool_name = params.get("pool_create_exist_pool_name", "default")
undefine_exist_pool = "yes" == params.get(
"pool_create_undefine_exist_pool", "no")
readonly_mode = "yes" == params.get("pool_create_readonly_mode", "no")
status_error = "yes" == params.get("status_error", "no")
exist_active = False
# Deal with each parameters
# backup the exist pool
pool_ins = libvirt_storage.StoragePool()
if use_exist_pool:
if not pool_ins.pool_exists(exist_pool_name):
raise error.TestFail("Require pool: %s exist", exist_pool_name)
backup_xml = libvirt_xml.PoolXML.backup_xml(exist_pool_name)
pool_xml = backup_xml
exist_active = pool_ins.is_pool_active(exist_pool_name)
# backup pool state
pool_ins_state = virsh.pool_state_dict()
logging.debug("Backed up pool(s): %s", pool_ins_state)
if "--file" in option:
pool_path = os.path.join(data_dir.get_data_dir(), 'images')
dir_xml = """
<pool type='dir'>
<name>%s</name>
<target>
<path>%s</path>
</target>
</pool>
""" % (pool_name, pool_path)
pool_xml = os.path.join(test.tmpdir, pool_xml)
xml_object = open(pool_xml, 'w')
xml_object.write(dir_xml)
xml_object.close()
# Delete the exist pool
start_pool = False
if undefine_exist_pool:
poolxml = libvirt_xml.PoolXML.new_from_dumpxml(exist_pool_name)
poolxml.name = pool_name
pool_xml = poolxml.xml
if pool_ins.is_pool_active(exist_pool_name):
start_pool = True
if not pool_ins.delete_pool(exist_pool_name):
raise error.TestFail("Delete pool: %s fail", exist_pool_name)
# Create an invalid pool xml file
if pool_xml == "invalid-pool-xml":
tmp_xml = xml_utils.TempXMLFile()
tmp_xml.write('"<pool><<<BAD>>><\'XML</name\>'
'!@#$%^&*)>(}>}{CORRUPTE|>!</pool>')
tmp_xml.flush()
pool_xml = tmp_xml.name
logging.info(pool_xml)
# Readonly mode
ro_flag = False
if readonly_mode:
logging.debug("Readonly mode test")
ro_flag = True
# Run virsh test
if os.path.isfile(pool_xml):
logging.debug("Create pool from file:\n %s", open(pool_xml, 'r').read())
try:
cmd_result = virsh.pool_create(
pool_xml,
option,
ignore_status=True,
debug=True,
readonly=ro_flag)
err = cmd_result.stderr.strip()
status = cmd_result.exit_status
if not status_error:
if status:
raise error.TestFail(err)
elif not pool_check(pool_name, pool_ins):
raise error.TestFail("Pool check fail")
elif status_error and status == 0:
# For an inactive 'default' pool, when the test runs to create
# an existing pool of 'default', the test will pass because the
# 'default' pool will be considered a transient pool when the
# 'name' and 'uuid' match (which they do in this case). So
# don't fail the test unnecessarily
if (pool_name == exist_pool_name and not exist_active):
pass
else:
raise error.TestFail("Expect fail, but run successfully.")
finally:
# Recover env
# If we have a different pool name than default OR
# we need to undefine this tests created default pool OR
# we had a transient, active default pool created above, then
# we need to destroy what the test created.
# NB: When the active, transient pool is destroyed the
# previously defined, but inactive pool will now exist.
if pool_name != exist_pool_name or undefine_exist_pool or \
(pool_name == exist_pool_name and not exist_active):
virsh.pool_destroy(pool_name)
# restore the undefined default pool
if undefine_exist_pool: # and not pool_ins.pool_exists(exist_pool_name):
virsh.pool_define(backup_xml)
if start_pool:
pool_ins.start_pool(exist_pool_name)
# Recover autostart
if pool_ins_state[exist_pool_name]['autostart']:
virsh.pool_autostart(exist_pool_name, ignore_status=False)
def run(test, params, env):
"""
Test rbd disk device.
1.Prepare test environment,destroy or suspend a VM.
2.Prepare disk image.
3.Edit disks xml and start the domain.
4.Perform test operation.
5.Recover test environment.
"""
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
virsh_dargs = {'debug': True, 'ignore_status': True}
additional_xml_file = os.path.join(data_dir.get_tmp_dir(), "additional_disk.xml")
def config_ceph():
"""
Write the configs to the file.
"""
src_host = disk_src_host.split()
src_port = disk_src_port.split()
conf_str = "mon_host = "
hosts = []
for host, port in zip(src_host, src_port):
hosts.append("%s:%s" % (host, port))
with open(disk_src_config, 'w') as f:
f.write(conf_str + ','.join(hosts) + '\n')
def create_pool():
"""
Define and start a pool.
"""
sp = libvirt_storage.StoragePool()
if create_by_xml:
p_xml = pool_xml.PoolXML(pool_type=pool_type)
p_xml.name = pool_name
s_xml = pool_xml.SourceXML()
s_xml.vg_name = disk_src_pool
source_host = []
for (host_name, host_port) in zip(
disk_src_host.split(), disk_src_port.split()):
source_host.append({'name': host_name,
'port': host_port})
s_xml.hosts = source_host
if auth_type:
s_xml.auth_type = auth_type
if auth_user:
s_xml.auth_username = auth_user
if auth_usage:
s_xml.secret_usage = auth_usage
p_xml.source = s_xml
logging.debug("Pool xml: %s", p_xml)
p_xml.xmltreefile.write()
ret = virsh.pool_define(p_xml.xml, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_build(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_start(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
else:
auth_opt = ""
if client_name and client_key:
auth_opt = ("--auth-type %s --auth-username %s --secret-usage '%s'"
% (auth_type, auth_user, auth_usage))
if not sp.define_rbd_pool(pool_name, mon_host,
disk_src_pool, extra=auth_opt):
test.fail("Failed to define storage pool")
if not sp.build_pool(pool_name):
test.fail("Failed to build storage pool")
if not sp.start_pool(pool_name):
test.fail("Failed to start storage pool")
# Check pool operation
ret = virsh.pool_refresh(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_uuid(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
# pool-info
pool_info = sp.pool_info(pool_name)
if pool_info["Autostart"] != 'no':
test.fail("Failed to check pool information")
# pool-autostart
if not sp.set_pool_autostart(pool_name):
test.fail("Failed to set pool autostart")
pool_info = sp.pool_info(pool_name)
if pool_info["Autostart"] != 'yes':
test.fail("Failed to check pool information")
# pool-autostart --disable
if not sp.set_pool_autostart(pool_name, "--disable"):
test.fail("Failed to set pool autostart")
# If port is not pre-configured, port value should not be hardcoded in pool information.
if "yes" == params.get("rbd_port", "no"):
if 'port' in virsh.pool_dumpxml(pool_name):
test.fail("port attribute should not be in pool information")
# find-storage-pool-sources-as
if "yes" == params.get("find_storage_pool_sources_as", "no"):
ret = virsh.find_storage_pool_sources_as("rbd", mon_host)
libvirt.check_result(ret, skip_if=unsupported_err)
def create_vol(vol_params):
"""
Create volume.
:param p_name. Pool name.
:param vol_params. Volume parameters dict.
:return: True if create successfully.
"""
pvt = libvirt.PoolVolumeTest(test, params)
if create_by_xml:
pvt.pre_vol_by_xml(pool_name, **vol_params)
else:
pvt.pre_vol(vol_name, None, '2G', None, pool_name)
def check_vol(vol_params):
"""
Check volume information.
"""
pv = libvirt_storage.PoolVolume(pool_name)
# Supported operation
if vol_name not in pv.list_volumes():
test.fail("Volume %s doesn't exist" % vol_name)
ret = virsh.vol_dumpxml(vol_name, pool_name)
libvirt.check_exit_status(ret)
# vol-info
if not pv.volume_info(vol_name):
test.fail("Can't see volume info")
# vol-key
ret = virsh.vol_key(vol_name, pool_name)
libvirt.check_exit_status(ret)
if "%s/%s" % (disk_src_pool, vol_name) not in ret.stdout.strip():
test.fail("Volume key isn't correct")
# vol-path
ret = virsh.vol_path(vol_name, pool_name)
libvirt.check_exit_status(ret)
if "%s/%s" % (disk_src_pool, vol_name) not in ret.stdout.strip():
test.fail("Volume path isn't correct")
# vol-pool
ret = virsh.vol_pool("%s/%s" % (disk_src_pool, vol_name))
libvirt.check_exit_status(ret)
if pool_name not in ret.stdout.strip():
test.fail("Volume pool isn't correct")
# vol-name
ret = virsh.vol_name("%s/%s" % (disk_src_pool, vol_name))
libvirt.check_exit_status(ret)
if vol_name not in ret.stdout.strip():
test.fail("Volume name isn't correct")
# vol-resize
ret = virsh.vol_resize(vol_name, "2G", pool_name)
libvirt.check_exit_status(ret)
# Not supported operation
# vol-clone
ret = virsh.vol_clone(vol_name, cloned_vol_name, pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
# vol-create-from
volxml = vol_xml.VolXML()
vol_params.update({"name": "%s" % create_from_cloned_volume})
v_xml = volxml.new_vol(**vol_params)
v_xml.xmltreefile.write()
ret = virsh.vol_create_from(pool_name, v_xml.xml, vol_name, pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
# vol-wipe
ret = virsh.vol_wipe(vol_name, pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
# vol-upload
ret = virsh.vol_upload(vol_name, vm.get_first_disk_devices()['source'],
"--pool %s" % pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
# vol-download
ret = virsh.vol_download(vol_name, cloned_vol_name, "--pool %s" % pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
def check_qemu_cmd():
"""
Check qemu command line options.
"""
cmd = ("ps -ef | grep %s | grep -v grep " % vm_name)
process.run(cmd, shell=True)
if disk_src_name:
cmd += " | grep file=rbd:%s:" % disk_src_name
if auth_user and auth_key:
cmd += ('id=%s:auth_supported=cephx' % auth_user)
if disk_src_config:
cmd += " | grep 'conf=%s'" % disk_src_config
elif mon_host:
hosts = '\:6789\;'.join(mon_host.split())
cmd += " | grep 'mon_host=%s'" % hosts
if driver_iothread:
cmd += " | grep iothread%s" % driver_iothread
# Run the command
process.run(cmd, shell=True)
def check_save_restore():
"""
Test save and restore operation
"""
save_file = os.path.join(data_dir.get_tmp_dir(),
"%s.save" % vm_name)
ret = virsh.save(vm_name, save_file, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.restore(save_file, **virsh_dargs)
libvirt.check_exit_status(ret)
if os.path.exists(save_file):
os.remove(save_file)
# Login to check vm status
vm.wait_for_login().close()
def check_snapshot(snap_option, target_dev='vda'):
"""
Test snapshot operation.
"""
snap_name = "s1"
snap_mem = os.path.join(data_dir.get_tmp_dir(), "rbd.mem")
snap_disk = os.path.join(data_dir.get_tmp_dir(), "rbd.disk")
xml_snap_exp = ["disk name='%s' snapshot='external' type='file'" % target_dev]
xml_dom_exp = ["source file='%s'" % snap_disk,
"backingStore type='network' index='1'",
"source protocol='rbd' name='%s'" % disk_src_name]
if snap_option.count("disk-only"):
options = ("%s --diskspec %s,file=%s --disk-only" %
(snap_name, target_dev, snap_disk))
elif snap_option.count("disk-mem"):
options = ("%s --memspec file=%s --diskspec %s,file="
"%s" % (snap_name, snap_mem, target_dev, snap_disk))
xml_snap_exp.append("memory snapshot='external' file='%s'"
% snap_mem)
else:
options = snap_name
ret = virsh.snapshot_create_as(vm_name, options)
if test_disk_internal_snapshot or test_disk_readonly:
libvirt.check_result(ret, expected_fails=unsupported_err)
else:
libvirt.check_result(ret, skip_if=unsupported_err)
# check xml file.
if not ret.exit_status:
snap_xml = virsh.snapshot_dumpxml(vm_name, snap_name,
debug=True).stdout.strip()
dom_xml = virsh.dumpxml(vm_name, debug=True).stdout.strip()
# Delete snapshots.
libvirt.clean_up_snapshots(vm_name)
if os.path.exists(snap_mem):
os.remove(snap_mem)
if os.path.exists(snap_disk):
os.remove(snap_disk)
if not all([x in snap_xml for x in xml_snap_exp]):
test.fail("Failed to check snapshot xml")
if not all([x in dom_xml for x in xml_dom_exp]):
test.fail("Failed to check domain xml")
def check_blockcopy(target):
"""
Block copy operation test.
"""
blk_file = os.path.join(data_dir.get_tmp_dir(), "blk.rbd")
if os.path.exists(blk_file):
os.remove(blk_file)
blk_mirror = ("mirror type='file' file='%s' "
"format='raw' job='copy'" % blk_file)
# Do blockcopy
ret = virsh.blockcopy(vm_name, target, blk_file)
libvirt.check_result(ret, skip_if=unsupported_err)
dom_xml = virsh.dumpxml(vm_name, debug=True).stdout.strip()
if not dom_xml.count(blk_mirror):
test.fail("Can't see block job in domain xml")
# Abort
ret = virsh.blockjob(vm_name, target, "--abort")
libvirt.check_exit_status(ret)
dom_xml = virsh.dumpxml(vm_name, debug=True).stdout.strip()
if dom_xml.count(blk_mirror):
test.fail("Failed to abort block job")
if os.path.exists(blk_file):
os.remove(blk_file)
# Sleep for a while after abort operation.
time.sleep(5)
# Do blockcopy again
ret = virsh.blockcopy(vm_name, target, blk_file)
libvirt.check_exit_status(ret)
# Wait for complete
def wait_func():
ret = virsh.blockjob(vm_name, target, "--info")
return ret.stderr.count("Block Copy: [100 %]")
timeout = params.get("blockjob_timeout", 600)
utils_misc.wait_for(wait_func, int(timeout))
# Pivot
ret = virsh.blockjob(vm_name, target, "--pivot")
libvirt.check_exit_status(ret)
dom_xml = virsh.dumpxml(vm_name, debug=True).stdout.strip()
if not dom_xml.count("source file='%s'" % blk_file):
test.fail("Failed to pivot block job")
# Remove the disk file.
if os.path.exists(blk_file):
os.remove(blk_file)
def check_in_vm(vm_obj, target, old_parts, read_only=False):
"""
Check mount/read/write disk in VM.
:param vm. VM guest.
:param target. Disk dev in VM.
:return: True if check successfully.
"""
try:
session = vm_obj.wait_for_login()
new_parts = libvirt.get_parts_list(session)
added_parts = list(set(new_parts).difference(set(old_parts)))
logging.info("Added parts:%s", added_parts)
if len(added_parts) != 1:
logging.error("The number of new partitions is invalid in VM")
return False
added_part = None
if target.startswith("vd"):
if added_parts[0].startswith("vd"):
added_part = added_parts[0]
elif target.startswith("hd"):
if added_parts[0].startswith("sd"):
added_part = added_parts[0]
if not added_part:
logging.error("Can't see added partition in VM")
return False
cmd = ("mount /dev/{0} /mnt && ls /mnt && (sleep 15;"
" touch /mnt/testfile; umount /mnt)"
.format(added_part))
s, o = session.cmd_status_output(cmd, timeout=60)
session.close()
logging.info("Check disk operation in VM:\n, %s, %s", s, o)
# Readonly fs, check the error messages.
# The command may return True, read-only
# messges can be found from the command output
if read_only:
if "Read-only file system" not in o:
return False
else:
return True
# Other errors
if s != 0:
return False
return True
except (remote.LoginError, virt_vm.VMError, aexpect.ShellError) as e:
logging.error(str(e))
return False
def clean_up_volume_snapshots():
"""
Get all snapshots for rbd_vol.img volume,unprotect and then clean up them.
"""
cmd = ("rbd -m {0} {1} info {2}"
"".format(mon_host, key_opt, os.path.join(disk_src_pool, vol_name)))
if process.run(cmd, ignore_status=True, shell=True).exit_status:
return
# Get snapshot list.
cmd = ("rbd -m {0} {1} snap"
" list {2}"
"".format(mon_host, key_opt, os.path.join(disk_src_pool, vol_name)))
snaps_out = process.run(cmd, ignore_status=True, shell=True).stdout_text
snap_names = []
if snaps_out:
for line in snaps_out.rsplit("\n"):
if line.startswith("SNAPID") or line == "":
continue
snap_line = line.rsplit()
if len(snap_line) == 4:
snap_names.append(snap_line[1])
logging.debug("Find snapshots: %s", snap_names)
# Unprotect snapshot first,otherwise it will fail to purge volume
for snap_name in snap_names:
cmd = ("rbd -m {0} {1} snap"
" unprotect {2}@{3}"
"".format(mon_host, key_opt, os.path.join(disk_src_pool, vol_name), snap_name))
process.run(cmd, ignore_status=True, shell=True)
# Purge volume,and then delete volume.
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} snap"
" purge {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt, os.path.join(disk_src_pool, vol_name)))
process.run(cmd, ignore_status=True, shell=True)
def make_snapshot():
"""
make external snapshots.
:return external snapshot path list
"""
logging.info("Making snapshot...")
first_disk_source = vm.get_first_disk_devices()['source']
snapshot_path_list = []
snapshot2_file = os.path.join(data_dir.get_tmp_dir(), "mem.s2")
snapshot3_file = os.path.join(data_dir.get_tmp_dir(), "mem.s3")
snapshot4_file = os.path.join(data_dir.get_tmp_dir(), "mem.s4")
snapshot4_disk_file = os.path.join(data_dir.get_tmp_dir(), "disk.s4")
snapshot5_file = os.path.join(data_dir.get_tmp_dir(), "mem.s5")
snapshot5_disk_file = os.path.join(data_dir.get_tmp_dir(), "disk.s5")
# Attempt to take different types of snapshots.
snapshots_param_dict = {"s1": "s1 --disk-only --no-metadata",
"s2": "s2 --memspec %s --no-metadata" % snapshot2_file,
"s3": "s3 --memspec %s --no-metadata --live" % snapshot3_file,
"s4": "s4 --memspec %s --diskspec vda,file=%s --no-metadata" % (snapshot4_file, snapshot4_disk_file),
"s5": "s5 --memspec %s --diskspec vda,file=%s --live --no-metadata" % (snapshot5_file, snapshot5_disk_file)}
for snapshot_name in sorted(snapshots_param_dict.keys()):
ret = virsh.snapshot_create_as(vm_name, snapshots_param_dict[snapshot_name],
**virsh_dargs)
libvirt.check_exit_status(ret)
if snapshot_name != 's4' and snapshot_name != 's5':
snapshot_path_list.append(first_disk_source.replace('qcow2', snapshot_name))
return snapshot_path_list
def get_secret_list():
"""
Get secret list.
:return secret list
"""
logging.info("Get secret list ...")
secret_list_result = virsh.secret_list()
secret_list = results_stdout_52lts(secret_list_result).strip().splitlines()
# First two lines contain table header followed by entries
# for each secret, such as:
#
# UUID Usage
# --------------------------------------------------------------------------------
# b4e8f6d3-100c-4e71-9f91-069f89742273 ceph client.libvirt secret
secret_list = secret_list[2:]
result = []
# If secret list is empty.
if secret_list:
for line in secret_list:
# Split on whitespace, assume 1 column
linesplit = line.split(None, 1)
result.append(linesplit[0])
return result
mon_host = params.get("mon_host")
disk_src_name = params.get("disk_source_name")
disk_src_config = params.get("disk_source_config")
disk_src_host = params.get("disk_source_host")
disk_src_port = params.get("disk_source_port")
disk_src_pool = params.get("disk_source_pool")
disk_format = params.get("disk_format", "raw")
driver_iothread = params.get("driver_iothread")
snap_name = params.get("disk_snap_name")
attach_device = "yes" == params.get("attach_device", "no")
attach_disk = "yes" == params.get("attach_disk", "no")
test_save_restore = "yes" == params.get("test_save_restore", "no")
test_snapshot = "yes" == params.get("test_snapshot", "no")
test_blockcopy = "yes" == params.get("test_blockcopy", "no")
test_qemu_cmd = "yes" == params.get("test_qemu_cmd", "no")
test_vm_parts = "yes" == params.get("test_vm_parts", "no")
additional_guest = "yes" == params.get("additional_guest", "no")
create_snapshot = "yes" == params.get("create_snapshot", "no")
convert_image = "yes" == params.get("convert_image", "no")
create_volume = "yes" == params.get("create_volume", "no")
create_by_xml = "yes" == params.get("create_by_xml", "no")
client_key = params.get("client_key")
client_name = params.get("client_name")
auth_key = params.get("auth_key")
auth_user = params.get("auth_user")
auth_type = params.get("auth_type")
auth_usage = params.get("secret_usage")
pool_name = params.get("pool_name")
pool_type = params.get("pool_type")
vol_name = params.get("vol_name")
cloned_vol_name = params.get("cloned_volume", "cloned_test_volume")
create_from_cloned_volume = params.get("create_from_cloned_volume", "create_from_cloned_test_volume")
vol_cap = params.get("vol_cap")
vol_cap_unit = params.get("vol_cap_unit")
start_vm = "yes" == params.get("start_vm", "no")
test_disk_readonly = "yes" == params.get("test_disk_readonly", "no")
test_disk_internal_snapshot = "yes" == params.get("test_disk_internal_snapshot", "no")
test_json_pseudo_protocol = "yes" == params.get("json_pseudo_protocol", "no")
disk_snapshot_with_sanlock = "yes" == params.get("disk_internal_with_sanlock", "no")
# Create /etc/ceph/ceph.conf file to suppress false warning error message.
process.run("mkdir -p /etc/ceph", ignore_status=True, shell=True)
cmd = ("echo 'mon_host = {0}' >/etc/ceph/ceph.conf"
.format(mon_host))
process.run(cmd, ignore_status=True, shell=True)
# Start vm and get all partions in vm.
if vm.is_dead():
vm.start()
session = vm.wait_for_login()
old_parts = libvirt.get_parts_list(session)
session.close()
vm.destroy(gracefully=False)
if additional_guest:
guest_name = "%s_%s" % (vm_name, '1')
timeout = params.get("clone_timeout", 360)
utils_libguestfs.virt_clone_cmd(vm_name, guest_name,
True, timeout=timeout,
ignore_status=False)
additional_vm = vm.clone(guest_name)
if start_vm:
virsh.start(guest_name)
# Back up xml file.
vmxml_backup = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
key_opt = ""
secret_uuid = None
snapshot_path = None
key_file = os.path.join(data_dir.get_tmp_dir(), "ceph.key")
img_file = os.path.join(data_dir.get_tmp_dir(),
"%s_test.img" % vm_name)
front_end_img_file = os.path.join(data_dir.get_tmp_dir(),
"%s_frontend_test.img" % vm_name)
# Construct a unsupported error message list to skip these kind of tests
unsupported_err = []
if driver_iothread:
unsupported_err.append('IOThreads not supported')
if test_snapshot:
unsupported_err.append('live disk snapshot not supported')
if test_disk_readonly:
if not libvirt_version.version_compare(5, 0, 0):
unsupported_err.append('Could not create file: Permission denied')
unsupported_err.append('Permission denied')
else:
unsupported_err.append('unsupported configuration: external snapshot ' +
'for readonly disk vdb is not supported')
if test_disk_internal_snapshot:
unsupported_err.append('unsupported configuration: internal snapshot for disk ' +
'vdb unsupported for storage type raw')
if test_blockcopy:
unsupported_err.append('block copy is not supported')
if attach_disk:
unsupported_err.append('No such file or directory')
if create_volume:
unsupported_err.append("backing 'volume' disks isn't yet supported")
unsupported_err.append('this function is not supported')
try:
# Clean up dirty secrets in test environments if there have.
dirty_secret_list = get_secret_list()
if dirty_secret_list:
for dirty_secret_uuid in dirty_secret_list:
virsh.secret_undefine(dirty_secret_uuid)
# Prepare test environment.
qemu_config = LibvirtQemuConfig()
if disk_snapshot_with_sanlock:
# Install necessary package:sanlock,libvirt-lock-sanlock
if not utils_package.package_install(["sanlock"]):
test.error("fail to install sanlock")
if not utils_package.package_install(["libvirt-lock-sanlock"]):
test.error("fail to install libvirt-lock-sanlock")
# Set virt_use_sanlock
result = process.run("setsebool -P virt_use_sanlock 1", shell=True)
if result.exit_status:
test.error("Failed to set virt_use_sanlock value")
# Update lock_manager in qemu.conf
qemu_config.lock_manager = 'sanlock'
# Update qemu-sanlock.conf.
san_lock_config = LibvirtSanLockConfig()
san_lock_config.user = '******'
san_lock_config.group = 'sanlock'
san_lock_config.host_id = 1
san_lock_config.auto_disk_leases = True
process.run("mkdir -p /var/lib/libvirt/sanlock", shell=True)
san_lock_config.disk_lease_dir = "/var/lib/libvirt/sanlock"
san_lock_config.require_lease_for_disks = False
# Start sanlock service and restart libvirtd to enforce changes.
result = process.run("systemctl start wdmd", shell=True)
if result.exit_status:
test.error("Failed to start wdmd service")
result = process.run("systemctl start sanlock", shell=True)
if result.exit_status:
test.error("Failed to start sanlock service")
utils_libvirtd.Libvirtd().restart()
# Prepare lockspace and lease file for sanlock in order.
sanlock_cmd_dict = OrderedDict()
sanlock_cmd_dict["truncate -s 1M /var/lib/libvirt/sanlock/TEST_LS"] = "Failed to truncate TEST_LS"
sanlock_cmd_dict["sanlock direct init -s TEST_LS:0:/var/lib/libvirt/sanlock/TEST_LS:0"] = "Failed to sanlock direct init TEST_LS:0"
sanlock_cmd_dict["chown sanlock:sanlock /var/lib/libvirt/sanlock/TEST_LS"] = "Failed to chown sanlock TEST_LS"
sanlock_cmd_dict["restorecon -R -v /var/lib/libvirt/sanlock"] = "Failed to restorecon sanlock"
sanlock_cmd_dict["truncate -s 1M /var/lib/libvirt/sanlock/test-disk-resource-lock"] = "Failed to truncate test-disk-resource-lock"
sanlock_cmd_dict["sanlock direct init -r TEST_LS:test-disk-resource-lock:" +
"/var/lib/libvirt/sanlock/test-disk-resource-lock:0"] = "Failed to sanlock direct init test-disk-resource-lock"
sanlock_cmd_dict["chown sanlock:sanlock " +
"/var/lib/libvirt/sanlock/test-disk-resource-lock"] = "Failed to chown test-disk-resource-loc"
sanlock_cmd_dict["sanlock client add_lockspace -s TEST_LS:1:" +
"/var/lib/libvirt/sanlock/TEST_LS:0"] = "Failed to client add_lockspace -s TEST_LS:0"
for sanlock_cmd in sanlock_cmd_dict.keys():
result = process.run(sanlock_cmd, shell=True)
if result.exit_status:
test.error(sanlock_cmd_dict[sanlock_cmd])
# Create one lease device and add it to VM.
san_lock_vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
lease_device = Lease()
lease_device.lockspace = 'TEST_LS'
lease_device.key = 'test-disk-resource-lock'
lease_device.target = {'path': '/var/lib/libvirt/sanlock/test-disk-resource-lock'}
san_lock_vmxml.add_device(lease_device)
san_lock_vmxml.sync()
# Install ceph-common package which include rbd command
if utils_package.package_install(["ceph-common"]):
if client_name and client_key:
with open(key_file, 'w') as f:
f.write("[%s]\n\tkey = %s\n" %
(client_name, client_key))
key_opt = "--keyring %s" % key_file
# Create secret xml
sec_xml = secret_xml.SecretXML("no", "no")
sec_xml.usage = auth_type
sec_xml.usage_name = auth_usage
sec_xml.xmltreefile.write()
logging.debug("Secret xml: %s", sec_xml)
ret = virsh.secret_define(sec_xml.xml)
libvirt.check_exit_status(ret)
secret_uuid = re.findall(r".+\S+(\ +\S+)\ +.+\S+",
ret.stdout.strip())[0].lstrip()
logging.debug("Secret uuid %s", secret_uuid)
if secret_uuid is None:
test.error("Failed to get secret uuid")
# Set secret value
auth_key = params.get("auth_key")
ret = virsh.secret_set_value(secret_uuid, auth_key,
**virsh_dargs)
libvirt.check_exit_status(ret)
# Delete the disk if it exists
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm "
"{2}".format(mon_host, key_opt, disk_src_name))
process.run(cmd, ignore_status=True, shell=True)
else:
test.error("Failed to install ceph-common")
if disk_src_config:
config_ceph()
disk_path = ("rbd:%s:mon_host=%s" %
(disk_src_name, mon_host))
if auth_user and auth_key:
disk_path += (":id=%s:key=%s" %
(auth_user, auth_key))
targetdev = params.get("disk_target", "vdb")
# To be compatible with create_disk_xml function,
# some parameters need to be updated.
params.update({
"type_name": params.get("disk_type", "network"),
"target_bus": params.get("disk_target_bus"),
"target_dev": targetdev,
"secret_uuid": secret_uuid,
"source_protocol": params.get("disk_source_protocol"),
"source_name": disk_src_name,
"source_host_name": disk_src_host,
"source_host_port": disk_src_port})
# Prepare disk image
if convert_image:
first_disk = vm.get_first_disk_devices()
blk_source = first_disk['source']
# Convert the image to remote storage
disk_cmd = ("rbd -m %s %s info %s 2> /dev/null|| qemu-img convert"
" -O %s %s %s" % (mon_host, key_opt,
disk_src_name, disk_format,
blk_source, disk_path))
process.run(disk_cmd, ignore_status=False, shell=True)
elif create_volume:
vol_params = {"name": vol_name, "capacity": int(vol_cap),
"capacity_unit": vol_cap_unit, "format": disk_format}
create_pool()
create_vol(vol_params)
check_vol(vol_params)
else:
# Create an local image and make FS on it.
disk_cmd = ("qemu-img create -f %s %s 10M && mkfs.ext4 -F %s" %
(disk_format, img_file, img_file))
process.run(disk_cmd, ignore_status=False, shell=True)
# Convert the image to remote storage
disk_cmd = ("rbd -m %s %s info %s 2> /dev/null|| qemu-img convert -O"
" %s %s %s" % (mon_host, key_opt, disk_src_name,
disk_format, img_file, disk_path))
process.run(disk_cmd, ignore_status=False, shell=True)
# Create disk snapshot if needed.
if create_snapshot:
snap_cmd = ("rbd -m %s %s snap create %s@%s" %
(mon_host, key_opt, disk_src_name, snap_name))
process.run(snap_cmd, ignore_status=False, shell=True)
if test_json_pseudo_protocol:
# Create one frontend image with the rbd backing file.
json_str = ('json:{"file.driver":"rbd",'
'"file.filename":"rbd:%s:mon_host=%s"}'
% (disk_src_name, mon_host))
# pass different json string according to the auth config
if auth_user and auth_key:
json_str = ('%s:id=%s:key=%s"}' % (json_str[:-2], auth_user, auth_key))
disk_cmd = ("qemu-img create -f qcow2 -b '%s' %s" %
(json_str, front_end_img_file))
disk_path = front_end_img_file
process.run(disk_cmd, ignore_status=False, shell=True)
# If hot plug, start VM first, and then wait the OS boot.
# Otherwise stop VM if running.
if start_vm:
if vm.is_dead():
vm.start()
vm.wait_for_login().close()
else:
if not vm.is_dead():
vm.destroy()
if attach_device:
if create_volume:
params.update({"source_pool": pool_name})
params.update({"type_name": "volume"})
# No need auth options for volume
if "auth_user" in params:
params.pop("auth_user")
if "auth_type" in params:
params.pop("auth_type")
if "secret_type" in params:
params.pop("secret_type")
if "secret_uuid" in params:
params.pop("secret_uuid")
if "secret_usage" in params:
params.pop("secret_usage")
xml_file = libvirt.create_disk_xml(params)
if additional_guest:
# Copy xml_file for additional guest VM.
shutil.copyfile(xml_file, additional_xml_file)
opts = params.get("attach_option", "")
ret = virsh.attach_device(vm_name, xml_file,
flagstr=opts, debug=True)
libvirt.check_result(ret, skip_if=unsupported_err)
if additional_guest:
# Make sure the additional VM is running
if additional_vm.is_dead():
additional_vm.start()
additional_vm.wait_for_login().close()
ret = virsh.attach_device(guest_name, additional_xml_file,
"", debug=True)
libvirt.check_result(ret, skip_if=unsupported_err)
elif attach_disk:
opts = params.get("attach_option", "")
ret = virsh.attach_disk(vm_name, disk_path,
targetdev, opts)
libvirt.check_result(ret, skip_if=unsupported_err)
elif test_disk_readonly:
params.update({'readonly': "yes"})
xml_file = libvirt.create_disk_xml(params)
opts = params.get("attach_option", "")
ret = virsh.attach_device(vm_name, xml_file,
flagstr=opts, debug=True)
libvirt.check_result(ret, skip_if=unsupported_err)
elif test_disk_internal_snapshot:
xml_file = libvirt.create_disk_xml(params)
opts = params.get("attach_option", "")
ret = virsh.attach_device(vm_name, xml_file,
flagstr=opts, debug=True)
libvirt.check_result(ret, skip_if=unsupported_err)
elif disk_snapshot_with_sanlock:
if vm.is_dead():
vm.start()
snapshot_path = make_snapshot()
if vm.is_alive():
vm.destroy()
elif not create_volume:
libvirt.set_vm_disk(vm, params)
if test_blockcopy:
logging.info("Creating %s...", vm_name)
vmxml_for_test = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
if vm.is_alive():
vm.destroy(gracefully=False)
vm.undefine()
if virsh.create(vmxml_for_test.xml, **virsh_dargs).exit_status:
vmxml_backup.define()
test.fail("Can't create the domain")
elif vm.is_dead():
vm.start()
# Wait for vm is running
vm.wait_for_login(timeout=600).close()
if additional_guest:
if additional_vm.is_dead():
additional_vm.start()
# Check qemu command line
if test_qemu_cmd:
check_qemu_cmd()
# Check partitions in vm
if test_vm_parts:
if not check_in_vm(vm, targetdev, old_parts,
read_only=create_snapshot):
test.fail("Failed to check vm partitions")
if additional_guest:
if not check_in_vm(additional_vm, targetdev, old_parts):
test.fail("Failed to check vm partitions")
# Save and restore operation
if test_save_restore:
check_save_restore()
if test_snapshot:
snap_option = params.get("snapshot_option", "")
check_snapshot(snap_option)
if test_blockcopy:
check_blockcopy(targetdev)
if test_disk_readonly:
snap_option = params.get("snapshot_option", "")
check_snapshot(snap_option, 'vdb')
if test_disk_internal_snapshot:
snap_option = params.get("snapshot_option", "")
check_snapshot(snap_option, targetdev)
# Detach the device.
if attach_device:
xml_file = libvirt.create_disk_xml(params)
ret = virsh.detach_device(vm_name, xml_file)
libvirt.check_exit_status(ret)
if additional_guest:
ret = virsh.detach_device(guest_name, xml_file)
libvirt.check_exit_status(ret)
elif attach_disk:
ret = virsh.detach_disk(vm_name, targetdev)
libvirt.check_exit_status(ret)
# Check disk in vm after detachment.
if attach_device or attach_disk:
session = vm.wait_for_login()
new_parts = libvirt.get_parts_list(session)
if len(new_parts) != len(old_parts):
test.fail("Disk still exists in vm"
" after detachment")
session.close()
except virt_vm.VMStartError as details:
for msg in unsupported_err:
if msg in str(details):
test.cancel(str(details))
else:
test.fail("VM failed to start."
"Error: %s" % str(details))
finally:
# Remove /etc/ceph/ceph.conf file if exists.
if os.path.exists('/etc/ceph/ceph.conf'):
os.remove('/etc/ceph/ceph.conf')
# Delete snapshots.
snapshot_lists = virsh.snapshot_list(vm_name)
if len(snapshot_lists) > 0:
libvirt.clean_up_snapshots(vm_name, snapshot_lists)
for snap in snapshot_lists:
virsh.snapshot_delete(vm_name, snap, "--metadata")
# Recover VM.
if vm.is_alive():
vm.destroy(gracefully=False)
if additional_guest:
virsh.remove_domain(guest_name,
"--remove-all-storage",
ignore_stauts=True)
# Remove the snapshot.
if create_snapshot:
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} snap"
" purge {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt, disk_src_name))
process.run(cmd, ignore_status=True, shell=True)
elif create_volume:
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt, os.path.join(disk_src_pool, cloned_vol_name)))
process.run(cmd, ignore_status=True, shell=True)
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt, os.path.join(disk_src_pool, create_from_cloned_volume)))
process.run(cmd, ignore_status=True, shell=True)
clean_up_volume_snapshots()
else:
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt, disk_src_name))
process.run(cmd, ignore_status=True, shell=True)
# Delete tmp files.
if os.path.exists(key_file):
os.remove(key_file)
if os.path.exists(img_file):
os.remove(img_file)
# Clean up volume, pool
if vol_name and vol_name in str(virsh.vol_list(pool_name).stdout):
virsh.vol_delete(vol_name, pool_name)
if pool_name and pool_name in virsh.pool_state_dict():
virsh.pool_destroy(pool_name, **virsh_dargs)
virsh.pool_undefine(pool_name, **virsh_dargs)
# Clean up secret
secret_list = get_secret_list()
if secret_list:
for secret_uuid in secret_list:
virsh.secret_undefine(secret_uuid)
logging.info("Restoring vm...")
vmxml_backup.sync()
if disk_snapshot_with_sanlock:
# Restore virt_use_sanlock setting.
process.run("setsebool -P virt_use_sanlock 0", shell=True)
# Restore qemu config
qemu_config.restore()
utils_libvirtd.Libvirtd().restart()
# Force shutdown sanlock service.
process.run("sanlock client shutdown -f 1", shell=True)
# Clean up lockspace folder
process.run("rm -rf /var/lib/libvirt/sanlock/*", shell=True)
if snapshot_path is not None:
for snapshot in snapshot_path:
if os.path.exists(snapshot):
os.remove(snapshot)
def run(test, params, env):
"""
Test disk encryption option.
1.Prepare test environment,destroy or suspend a VM.
2.Prepare pool, volume.
3.Edit disks xml and start the domain.
4.Perform test operation.
5.Recover test environment.
6.Confirm the test result.
"""
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
virsh_dargs = {'debug': True, 'ignore_status': True}
def create_pool(p_name, p_type, p_target):
"""
Define and start a pool.
:param p_name. Pool name.
:param p_type. Pool type.
:param p_target. Pool target path.
"""
p_xml = pool_xml.PoolXML(pool_type=p_type)
p_xml.name = p_name
p_xml.target_path = p_target
if not os.path.exists(p_target):
os.mkdir(p_target)
p_xml.xmltreefile.write()
ret = virsh.pool_define(p_xml.xml, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_build(p_name, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_start(p_name, **virsh_dargs)
libvirt.check_exit_status(ret)
def create_vol(p_name, target_encrypt_params, vol_params):
"""
Create volume.
:param p_name. Pool name.
:param target_encrypt_params encrypt parameters in dict.
:param vol_params. Volume parameters dict.
:return: True if create successfully.
"""
volxml = vol_xml.VolXML()
v_xml = volxml.new_vol(**vol_params)
v_xml.encryption = volxml.new_encryption(**target_encrypt_params)
v_xml.xmltreefile.write()
ret = virsh.vol_create(p_name, v_xml.xml, **virsh_dargs)
libvirt.check_exit_status(ret)
def create_secret(vol_path):
"""
Create secret.
:param vol_path. volume path.
:return: secret id if create successfully.
"""
sec_xml = secret_xml.SecretXML("no", "yes")
sec_xml.description = "volume secret"
sec_xml.usage = 'volume'
sec_xml.volume = vol_path
sec_xml.xmltreefile.write()
ret = virsh.secret_define(sec_xml.xml)
libvirt.check_exit_status(ret)
# Get secret uuid.
try:
encryption_uuid = re.findall(r".+\S+(\ +\S+)\ +.+\S+",
ret.stdout.strip())[0].lstrip()
except IndexError as e:
test.error("Fail to get newly created secret uuid")
logging.debug("Secret uuid %s", encryption_uuid)
# Set secret value.
encoding = locale.getpreferredencoding()
secret_string = base64.b64encode(secret_password_no_encoded.encode(encoding)).decode(encoding)
ret = virsh.secret_set_value(encryption_uuid, secret_string,
**virsh_dargs)
libvirt.check_exit_status(ret)
return encryption_uuid
def check_in_vm(vm, target, old_parts):
"""
Check mount/read/write disk in VM.
:param vm. VM guest.
:param target. Disk dev in VM.
:return: True if check successfully.
"""
try:
session = vm.wait_for_login()
rpm_stat = session.cmd_status("rpm -q parted || "
"yum install -y parted", 300)
if rpm_stat != 0:
test.fail("Failed to query/install parted, make sure"
" that you have usable repo in guest")
new_parts = libvirt.get_parts_list(session)
added_parts = list(set(new_parts).difference(set(old_parts)))
logging.info("Added parts:%s", added_parts)
if len(added_parts) != 1:
logging.error("The number of new partitions is invalid in VM")
return False
added_part = None
if target.startswith("vd"):
if added_parts[0].startswith("vd"):
added_part = added_parts[0]
elif target.startswith("hd"):
if added_parts[0].startswith("sd"):
added_part = added_parts[0]
if not added_part:
logging.error("Can't see added partition in VM")
return False
device_source = os.path.join(os.sep, 'dev', added_part)
libvirt.mk_label(device_source, session=session)
libvirt.mk_part(device_source, size="10M", session=session)
# Run partprobe to make the change take effect.
process.run("partprobe", ignore_status=True, shell=True)
libvirt.mkfs("/dev/%s1" % added_part, "ext3", session=session)
cmd = ("mount /dev/%s1 /mnt && echo '123' > /mnt/testfile"
" && cat /mnt/testfile && umount /mnt" % added_part)
s, o = session.cmd_status_output(cmd)
logging.info("Check disk operation in VM:\n%s", o)
session.close()
if s != 0:
return False
return True
except (remote.LoginError, virt_vm.VMError, aexpect.ShellError) as e:
logging.error(str(e))
return False
# Disk specific attributes.
device = params.get("virt_disk_device", "disk")
device_target = params.get("virt_disk_device_target", "vdd")
device_type = params.get("virt_disk_device_type", "file")
device_bus = params.get("virt_disk_device_bus", "virtio")
encryption_in_source = "yes" == params.get("encryption_in_source")
encryption_out_source = "yes" == params.get("encryption_out_source")
if encryption_in_source and not libvirt_version.version_compare(3, 9, 0):
test.cancel("Cannot put <encryption> inside disk <source> in "
"this libvirt version.")
# Pool/Volume options.
pool_name = params.get("pool_name")
pool_type = params.get("pool_type")
pool_target = params.get("pool_target")
volume_name = params.get("vol_name")
volume_alloc = params.get("vol_alloc")
volume_cap_unit = params.get("vol_cap_unit")
volume_cap = params.get("vol_cap")
volume_target_path = params.get("target_path")
volume_target_format = params.get("target_format")
volume_target_encypt = params.get("target_encypt", "")
volume_target_label = params.get("target_label")
hotplug = "yes" == params.get("virt_disk_device_hotplug")
status_error = "yes" == params.get("status_error")
secret_type = params.get("secret_type", "passphrase")
secret_password_no_encoded = params.get("secret_password_no_encoded", "redhat")
virt_disk_qcow2_format = "yes" == params.get("virt_disk_qcow2_format")
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
# Start vm and get all partions in vm.
if vm.is_dead():
vm.start()
session = vm.wait_for_login()
old_parts = libvirt.get_parts_list(session)
session.close()
vm.destroy(gracefully=False)
# Back up xml file.
vmxml_backup = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
sec_encryption_uuid = None
try:
# Prepare the disk.
sec_uuids = []
create_pool(pool_name, pool_type, pool_target)
vol_params = {"name": volume_name, "capacity": int(volume_cap),
"allocation": int(volume_alloc), "format":
volume_target_format, "path": volume_target_path,
"label": volume_target_label,
"capacity_unit": volume_cap_unit}
vol_encryption_params = {}
vol_encryption_params.update({"format": volume_target_encypt})
# For any disk format other than qcow2, it need create secret firstly.
if not virt_disk_qcow2_format:
# create secret.
sec_encryption_uuid = create_secret(volume_target_path)
sec_uuids.append(sec_encryption_uuid)
vol_encryption_params.update({"secret": {"type": secret_type, "uuid": sec_encryption_uuid}})
try:
# If Libvirt version is lower than 2.5.0
# Creating luks encryption volume is not supported,so skip it.
create_vol(pool_name, vol_encryption_params, vol_params)
except AssertionError as info:
err_msgs = ("create: invalid option")
if str(info).count(err_msgs):
test.error("Creating luks encryption volume "
"is not supported on this libvirt version")
else:
test.error("Failed to create volume."
"Error: %s" % str(info))
# Add disk xml.
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
disk_xml = Disk(type_name=device_type)
disk_xml.device = device
if device_type == "file":
dev_attrs = "file"
elif device_type == "dir":
dev_attrs = "dir"
else:
dev_attrs = "dev"
disk_source = disk_xml.new_disk_source(
**{"attrs": {dev_attrs: volume_target_path}})
disk_xml.driver = {"name": "qemu", "type": volume_target_format,
"cache": "none"}
disk_xml.target = {"dev": device_target, "bus": device_bus}
v_xml = vol_xml.VolXML.new_from_vol_dumpxml(volume_name, pool_name)
sec_uuids.append(v_xml.encryption.secret["uuid"])
if not status_error:
logging.debug("vol info -- format: %s, type: %s, uuid: %s",
v_xml.encryption.format,
v_xml.encryption.secret["type"],
v_xml.encryption.secret["uuid"])
encryption_dict = {"encryption": v_xml.encryption.format,
"secret": {"type": v_xml.encryption.secret["type"],
"uuid": v_xml.encryption.secret["uuid"]}}
if encryption_in_source:
disk_source.encryption = disk_xml.new_encryption(
**encryption_dict)
if encryption_out_source:
disk_xml.encryption = disk_xml.new_encryption(
**encryption_dict)
disk_xml.source = disk_source
logging.debug("disk xml is:\n%s" % disk_xml)
if not hotplug:
# Sync VM xml.
vmxml.add_device(disk_xml)
vmxml.sync()
try:
# Start the VM and do disk hotplug if required,
# then check disk status in vm.
# Note that LUKS encrypted virtual disk without <encryption>
# can be normally started or attached since qemu will just treat
# it as RAW, so we don't test LUKS with status_error=TRUE.
vm.start()
vm.wait_for_login()
if status_error:
if hotplug:
logging.debug("attaching disk, expecting error...")
result = virsh.attach_device(vm_name, disk_xml.xml)
libvirt.check_exit_status(result, status_error)
else:
test.fail("VM started unexpectedly.")
else:
if hotplug:
result = virsh.attach_device(vm_name, disk_xml.xml,
debug=True)
libvirt.check_exit_status(result)
if not check_in_vm(vm, device_target, old_parts):
test.fail("Check encryption disk in VM failed")
result = virsh.detach_device(vm_name, disk_xml.xml,
debug=True)
libvirt.check_exit_status(result)
else:
if not check_in_vm(vm, device_target, old_parts):
test.fail("Check encryption disk in VM failed")
except virt_vm.VMStartError as e:
if status_error:
if hotplug:
test.fail("In hotplug scenario, VM should "
"start successfully but not."
"Error: %s", str(e))
else:
logging.debug("VM failed to start as expected."
"Error: %s", str(e))
else:
# Libvirt2.5.0 onward,AES-CBC encrypted qcow2 images is no
# longer supported.
err_msgs = ("AES-CBC encrypted qcow2 images is"
" no longer supported in system emulators")
if str(e).count(err_msgs):
test.cancel(err_msgs)
else:
test.fail("VM failed to start."
"Error: %s" % str(e))
finally:
# Recover VM.
if vm.is_alive():
vm.destroy(gracefully=False)
logging.info("Restoring vm...")
vmxml_backup.sync()
# Clean up pool, vol
for sec_uuid in set(sec_uuids):
virsh.secret_undefine(sec_uuid, **virsh_dargs)
virsh.vol_delete(volume_name, pool_name, **virsh_dargs)
if pool_name in virsh.pool_state_dict():
virsh.pool_destroy(pool_name, **virsh_dargs)
virsh.pool_undefine(pool_name, **virsh_dargs)
