def getClosestPointDistance(tree, x, y, z):
closestPoint = [0.0, 0.0, 0.0]
cellId = vtk.reference(0)
subId = vtk.reference(0)
distance = vtk.reference(0)
tree.FindClosestPoint((x, y, z), closestPoint, cellId, subId, distance)
return distance
def CloudMeanDist(source, target):
# Source contains few points, target contains many
locator = vtk.vtkCellLocator()
locator.SetDataSet(target)
locator.SetNumberOfCellsPerBucket(1)
locator.BuildLocator()
nPoints = source.GetNumberOfPoints()
closestp = vtk.vtkPoints()
closestp.SetNumberOfPoints(nPoints)
subId = vtk.reference(0)
dist2 = vtk.reference(0.0)
cellId = vtk.reference(0) # mutable <-> reference
outPoint = [0.0, 0.0, 0.0]
for i in range(nPoints):
locator.FindClosestPoint(source.GetPoint(i), outPoint, cellId, subId,
dist2)
closestp.SetPoint(i, outPoint)
totaldist = 0.0
p1 = [0.0, 0.0, 0.0]
p2 = [0.0, 0.0, 0.0]
for i in range(nPoints):
# RMS
totaldist = totaldist + vtk.vtkMath.Distance2BetweenPoints(
source.GetPoint(i), closestp.GetPoint(i))
return totaldist / nPoints
def RMS(sourceSurfaceFile, targetSurfaceFile, VTKobj=False):
# Reading surfaces
if not VTKobj:
reader = vtk.vtkPolyDataReader()
reader.SetFileName(sourceSurfaceFile)
reader.Update()
sourceSurface = reader.GetOutput()
reader = vtk.vtkPolyDataReader()
reader.SetFileName(targetSurfaceFile)
reader.Update()
targetSurface = reader.GetOutput()
else:
sourceSurface = sourceSurfaceFile
targetSurface = targetSurfaceFile
cellLocator = vtk.vtkCellLocator()
cellLocator.SetDataSet(targetSurface)
cellLocator.BuildLocator()
sourcePoints = vtk_to_numpy(sourceSurface.GetPoints().GetData())
distances = np.zeros([np.size(sourcePoints, 0), 1])
idx = 0
for point in sourcePoints:
closestPoint = [0, 0, 0]
closestPointDist2 = vtk.reference(np.float64())
cellId = vtk.reference(1)
subId = vtk.reference(1)
cellLocator.FindClosestPoint(point, closestPoint, cellId, subId,
closestPointDist2)
distances[idx] = closestPointDist2
idx += 1
RMS = np.sqrt((distances).mean())
return RMS
def testPassTupleByReference(self):
n = vtk.reference(0)
t = vtk.reference((0,))
ca = vtk.vtkCellArray()
ca.InsertNextCell(3, (1, 3, 0))
ca.GetCell(0, n, t)
self.assertEqual(n, 3)
self.assertEqual(tuple(t), (1, 3, 0))
def testFloatReference(self):
m = vtk.reference(3.0)
n = vtk.reference(4.0)
m *= 2
self.assertEqual(m, 6.0)
self.assertEqual(str(m), str(m.get()))
o = n + m
self.assertEqual(o, 10.0)
def testGetRangeTwoDoubleStarArg(self):
cmap = vtk.vtkDiscretizableColorTransferFunction()
localMin = vtk.reference(-1)
localMax = vtk.reference(-1)
cmap.GetRange(localMin, localMax)
self.assertEqual(localMin, 0.0)
self.assertEqual(localMax, 0.0)
def merge(feature_points_path, segment_points_path, merge_points_path):
'''
feature_points_path:str， 特征点的文件路径
segment_points_path:str, 分割后网格的顶点的文件路径
merge_points_path:str， 合并后的顶点存储路径
'''
# 读取feature_points
vertice_number = 0
feature_vertices = []
with open(feature_points_path, 'r') as f1:
for line in f1.readlines():
line = str.split(line, ' ')
vertice_number = vertice_number + 1
feature_vertices.append(
[float(line[0]),
float(line[1]),
float(line[2])])
points = vtk.vtkPoints()
points.SetNumberOfPoints(vertice_number)
for i in range(vertice_number):
points.SetPoint(i, feature_vertices[i])
# 初始化合并的顶点集
merge_points = vtk.vtkMergePoints()
# merge_points.SetDataSet(points)
merge_points.InitPointInsertion(points, points.GetBounds())
id = vtk.reference(0)
for i in range(vertice_number):
merge_points.InsertUniquePoint(points.GetPoint(i), id)
vertice_number = 0
segment_points = []
with open(segment_points_path, 'r') as f2:
for line in f2.readlines():
line = str.split(line, ' ')
if line[0] == 'v':
segment_points.append(
[float(line[1]),
float(line[2]),
float(line[3])])
vertice_number = vertice_number + 1
else:
break
id = vtk.reference(0)
replated_points_id = []
for i in range(vertice_number):
inserted = merge_points.InsertUniquePoint(segment_points[i], id)
if inserted == 0:
replated_points_id.append([id, i])
result = merge_points.GetPoints()
with open(merge_points_path, 'w') as f3:
for i in range(result.GetNumberOfPoints()):
pointTemp = result.GetPoint(i)
f3.write("%f %f %f\n" % (pointTemp[0], pointTemp[1], pointTemp[2]))
print("Replicated points number: %d" % len(replated_points_id))
return len(replated_points_id)
def compute_length_in_cell(self, cell, p1, p2):
"""Compute lenght of the line inside a cell.
Parameters
----------
cell : vtkCell
The cell to be cut by a line.
p1 : type
First endpoint describing the line.
p2 : type
Second endpoint describing the line.
Returns
-------
float
Intersected length.
"""
# set up a bunch of dummy properties for passing to the cell functions.
t = vtk.reference(0.0)
dist = vtk.reference(0.0)
pcords = [0.0, 0.0, 0.0]
subid = vtk.reference(0)
weights = [0.0] * cell.GetNumberOfPoints()
dummy = [0.0, 0.0, 0.0]
# Determine wether the points are inside the cell
in1 = cell.EvaluatePosition(p1, dummy, subid, pcords, dist, weights)
in2 = cell.EvaluatePosition(p2, dummy, subid, pcords, dist, weights)
# Both points inside
if in1 == 1 and in2 == 1:
return np.linalg.norm(np.array(p2) - np.array(p1))
# Both points outside
if in1 == 0 and in2 == 0:
return 0.0
# Only point 2 inside
if in1 == 0 and in2 == 1:
x = [0.0, 0.0, 0.0]
res = cell.IntersectWithLine(p1, p2, 0.0, t, x, pcords, subid)
if res > 0:
return np.linalg.norm(np.array(p2) - np.array(x))
else:
return 0.0
# Only point 1 inside
if in1 == 1 and in2 == 0:
x = [0.0, 0.0, 0.0]
res = cell.IntersectWithLine(p1, p2, 0.0, t, x, pcords, subid)
if res > 0:
return np.linalg.norm(np.array(p1) - np.array(x))
else:
return 0.0
return 0.0
def nearest_neighbor(matrix, array, stlpath):
reader1 = vtk.vtkSTLReader()
reader1.SetFileName(stlpath)
reader1.Update()
target_polydata = reader1.GetOutput()
# ============ create source points ==============
print("Creating source points...")
sourcePoints = vtk.vtkPoints()
sourceVertices = vtk.vtkCellArray()
for i in range(array.shape[0]):
sp_id = sourcePoints.InsertNextPoint(array[i][0], array[i][1],
array[i][2])
sourceVertices.InsertNextCell(1)
sourceVertices.InsertCellPoint(sp_id)
source = vtk.vtkPolyData()
source.SetPoints(sourcePoints)
source.SetVerts(sourceVertices)
trans = vtk.vtkTransform()
trans.SetMatrix(matrix)
icpTransformFilter = vtk.vtkTransformPolyDataFilter()
icpTransformFilter.SetInputData(source)
icpTransformFilter.SetTransform(trans)
icpTransformFilter.Update()
transformedSource = icpTransformFilter.GetOutput()
my_cell_locator = vtk.vtkCellLocator()
my_cell_locator.SetDataSet(
target_polydata) # reverse.GetOutput() --> vtkPolyData
my_cell_locator.BuildLocator()
# ============ display transformed points ==============
pointCount = array.shape[0]
transform_array = np.zeros(shape=(pointCount, 3))
for index in range(pointCount):
point = [0, 0, 0]
transformedSource.GetPoint(index, point)
# print("transformed source point[%s] = [%.2f, %.2f, %.2f]" % (index, point[0], point[1], point[2]))
cellId = vtk.reference(0)
c = [0.0, 0.0, 0.0]
subId = vtk.reference(0)
d = vtk.reference(0.0)
my_cell_locator.FindClosestPoint(point, c, cellId, subId, d)
print("nearest neighbor point[%s] = [%.2f, %.2f, %.2f]" %
(index, c[0], c[1], c[2]))
transform_array[index] = c
return transform_array
def merge(self):
merge_points = vtk.vtkMergePoints()
merge_points.InitPointInsertion(self.points, self.points.GetBounds())
id = vtk.reference(0)
for i in range(self.vertice_number):
merge_points.InsertUniquePoint(self.points.GetPoint(i), id)
for i in range(self.Count,
min(self.Count + self.interval, len(self.vertices))):
inserted = merge_points.InsertUniquePoint(self.vertices[i], id)
if inserted == 1:
self.vertice_number += 1
if self.Count + self.interval < len(self.vertices):
self.Count = self.Count + self.interval
else:
self.Count = len(self.vertices)
self.points = merge_points.GetPoints()
self.interactor.GetRenderWindow().GetRenderers().GetFirstRenderer(
).RemoveActor(self.actor)
self.actor = create_points_actor(self.points)
self.interactor.GetRenderWindow().GetRenderers().GetFirstRenderer(
).AddActor(self.actor)
self.interactor.GetRenderWindow().Render()
def merge(self):
merge_points = vtk.vtkMergePoints()
merge_points.InitPointInsertion(self.points, self.points.GetBounds())
id = vtk.reference(0)
for i in range(self.vertice_number):
merge_points.InsertUniquePoint(self.points.GetPoint(i), id)
with open(self.files[self.Count], 'r') as f:
for line in f.readlines():
line = str.split(line, ' ')
inserted = merge_points.InsertUniquePoint(
[float(line[0]),
float(line[1]),
float(line[2])], id)
if inserted == 1:
self.vertice_number += 1
self.points = merge_points.GetPoints()
self.Count += 1
renderers = self.interactor.GetRenderWindow().GetRenderers()
renderers.InitTraversal()
points_renderer = renderers.GetNextItem()
points_renderer.RemoveActor(self.points_actor)
self.points_actor = create_points_actor(points)
points_renderer.AddActor(self.points_actor)
surface_renderer = renderers.GetNextItem()
surface_renderer.RemoveActor(self.surface_actor)
self.surface_actor = create_surface_actor(points)
surface_renderer.AddActor(self.surface_actor)
self.interactor.GetRenderWindow().Render()
def distance_from_point(self,point):
"""This function returns the distance from any point to the closest node in the tree.
Args:
point (array): the coordinates of the point to calculate the distance from.
Returns:
d (float): the distance between point and the closest node in the tree.
"""
dist = 0.0
vtk_d = vtk.reference(dist)
vtk_node = self.vtk_tree.FindClosestPoint( point, vtk_d )
vtk_d = sqrt(vtk_d)
#if vtk_d == 0.0: vtk_d = 1.73205080756e+11
# [davep]
#d,node=self.tree.query(point)
self._logger.debug(" ----------------")
self._logger.debug("point %s " % (str(point)))
self._logger.debug("vtk d %f node %d" % (vtk_d, vtk_node))
#self._logger.debug("sci d %f node %d" % (d, node))
d = vtk_d
node = vtk_node
# distance=pool.map(lambda a: np.linalg.norm(a-point),self.nodes.values())
return d
def AssignLabelToRoots(root_canal, surf, label_name):
label_array = surf.GetPointData().GetArray(label_name)
RC_BoundingBox = root_canal.GetPoints().GetBounds()
x = (RC_BoundingBox[0] + RC_BoundingBox[1]) / 2
y = (RC_BoundingBox[2] + RC_BoundingBox[3]) / 2
z = (RC_BoundingBox[4] + RC_BoundingBox[5]) / 2
surfID = vtk.vtkOctreePointLocator()
surfID.SetDataSet(surf)
surfID.BuildLocator()
labelID = vtk.vtkIntArray()
labelID.SetNumberOfComponents(1)
labelID.SetNumberOfTuples(root_canal.GetNumberOfPoints())
labelID.SetName(label_name)
labelID.Fill(-1)
for pid in range(labelID.GetNumberOfTuples()):
ID = surfID.FindClosestPoint(x, y, z, vtk.reference(20))
labelID.SetTuple(pid, (int(label_array.GetTuple(ID)[0]), ))
root_canal.GetPointData().AddArray(labelID)
return root_canal
def main():
line_p0 = (0.0, 0.0, 0.0)
line_p1 = (2.0, 0.0, 0.0)
p0 = (1.0, 0, 0)
p1 = (1.0, 2.0, 0)
# line = vtk.vtkSmartPointer()
# line.GetPoints().SetPoint(0, lineP0)
# line.GetPoints().SetPoint(0, lineP1)
dist0 = vtk.vtkLine.DistanceToLine(p0, line_p0, line_p1)
print("Dist0:", dist0)
dist1 = vtk.vtkLine.DistanceToLine(p1, line_p0, line_p1)
print("Dist1:", dist1)
t = vtk.reference(0.0)
closest = [0.0, 0.0, 0.0]
dist0 = vtk.vtkLine.DistanceToLine(p0, line_p0, line_p1, t, closest)
print(
"Dist0:",
dist0,
"closest point:",
closest[0],
closest[1],
closest[2])
dist1 = vtk.vtkLine.DistanceToLine(p1, line_p0, line_p1, t, closest)
print("Dist1:",
dist1,
"closest point:",
closest[0],
closest[1],
closest[2])
def testPassByReferenceerence(self):
t = vtk.reference(0.0)
p0 = (0.5, 0.0, 0.0)
n = (1.0, 0.0, 0.0)
p1 = (0.0, 0.0, 0.0)
p2 = (1.0, 1.0, 1.0)
x = [0.0, 0.0, 0.0]
vtk.vtkPlane.IntersectWithLine(p1, p2, n, p0, t, x)
self.assertEqual(round(t,6), 0.5)
self.assertEqual(round(x[0],6), 0.5)
self.assertEqual(round(x[1],6), 0.5)
self.assertEqual(round(x[2],6), 0.5)
vtk.vtkPlane().IntersectWithLine(p1, p2, n, p0, t, x)
self.assertEqual(round(t,6), 0.5)
self.assertEqual(round(x[0],6), 0.5)
self.assertEqual(round(x[1],6), 0.5)
self.assertEqual(round(x[2],6), 0.5)
t.set(0)
p = vtk.vtkPlane()
p.SetOrigin(0.5, 0.0, 0.0)
p.SetNormal(1.0, 0.0, 0.0)
p.IntersectWithLine(p1, p2, t, x)
self.assertEqual(round(t,6), 0.5)
self.assertEqual(round(x[0],6), 0.5)
self.assertEqual(round(x[1],6), 0.5)
self.assertEqual(round(x[2],6), 0.5)
vtk.vtkPlane.IntersectWithLine(p, p1, p2, t, x)
self.assertEqual(round(t,6), 0.5)
self.assertEqual(round(x[0],6), 0.5)
self.assertEqual(round(x[1],6), 0.5)
self.assertEqual(round(x[2],6), 0.5)
def collision(self,point):
"""This function returns the distance between one point and the closest node in the tree and the index of the closest node using the collision_tree.
Args:
point (array): the coordinates of the point to calculate the distance from.
Returns:
collision (tuple): (distance to the closest node, index of the closest node)
"""
dist = 0.0
vtk_d = vtk.reference(dist)
vtk_node = self.vtk_collision_tree.FindClosestPoint( point, vtk_d )
vtk_d = sqrt(vtk_d)
if vtk_d == 0.0: vtk_d = float("inf")
# [davep]
#d,node=self.collision_tree.query(point)
self._logger.debug("----------------")
self._logger.debug("point %s " % (str(point)))
self._logger.debug("vtk d %f node %d" % (vtk_d, vtk_node))
#self._logger.debug("sci d %f node %d" % (d, node))
d = vtk_d
node = vtk_node
collision=(self.nodes_to_consider_keys[node],d)
return collision
def Locate(self, xyz):
if self.is_vtu:
cid = self.locator.FindCell(xyz, 0.0, self.gc, self.pc,
self.wts)
if cid < 0:
self.xyz = []
return False
idl = vtk.vtkIdList()
self.dset.GetCellPoints(cid, idl)
self.ids = [idl.GetId(i) for i in range(idl.GetNumberOfIds())]
#print("LOCATE cid", cid)
#print("vids", self.ids)
#print('wts', self.wts)
else:
vox = self.dset.FindAndGetCell(xyz, None, 0, 0.0,
vtk.reference(self.sid),
self.pc, self.wts)
if vox == None:
self.xyz = []
return None
self.ids = [
vox.GetPointId(i) for i in range(vox.GetNumberOfPoints())
]
self.xyz = xyz
return True
def distanceToClosestPointToLine(tree, point1, point2, precision):
minDistance = 0
xEntry, yEntry, zEntry = point1[0], point1[1], point1[2]
xTarget, yTarget, zTarget = point2[0], point2[1], point2[2]
for step in np.arange(0, 1, precision):
x = xEntry + step * (xTarget - xEntry)
y = yEntry + step * (yTarget - yEntry)
z = zEntry + step * (zTarget - zEntry)
testPoint = (x, y, z)
closestPoint = [0.0, 0.0, 0.0]
vector = MathTools.returnVectorFromPoints(point1, point2)
minDistance = MathTools.magnitudeVector(vector)
ID = 0
cellId = vtk.reference(ID)
subId = vtk.reference(ID)
closestPointDist2 = vtk.reference(ID)
tree.FindClosestPoint(testPoint, closestPoint, cellId, subId,
closestPointDist2)
if closestPointDist2 < minDistance:
minDistance = closestPointDist2
minDistance
return minDistance
def apply_load(self):
uGrid = self.uGrid
cell_locator = vtk.vtkCellLocator()
cell_locator.SetDataSet(uGrid)
cell_locator.BuildLocator()
closest_point = [0.0, 0.0,
0.0] # coordinate of closest point (to be returned)
gen_cell = vtk.vtkGenericCell(
) # when having many query points, accelerate the cell locator by allocating once
cell_id = vtk.reference(0) # located cell (to be returned)
sub_id = vtk.reference(0) # rarely used (to be returned)
dist2 = vtk.reference(0.0)
self.applied_forces = []
for i, l in enumerate(self.cell_lists):
force = self.forces[i]
for ids in l:
cell_locator.FindClosestPoint(
[self.center_x[ids[0]], self.center_y[ids[1]], 0.0],
closest_point, gen_cell, cell_id, sub_id, dist2)
cellId = cell_id.get()
force_info = [cellId, force, 0]
self.applied_forces.append(force_info)
def __init__(self, dset):
self.dset = dset.VTKObject
self.xyz = [-10000, -20000, -30000]
self.pids = vtk.reference([0] * 10)
self.nverts = -1
self.pc = [0] * 3
self.wts = [0] * 10
self.gc = vtk.vtkGenericCell()
self.sid = 2
if self.dset.IsA('vtkUnstructuredGrid'):
self.locator = vtk.vtkCellTreeLocator()
self.locator.SetDataSet(dset.VTKObject)
self.locator.BuildLocator()
self.is_vtu = True
else:
self.is_vtu = False
def testGeo():
p1 = (2, 0, 0)
p2 = (0, 1, 0)
t = vtk.reference(1)
closest = [0, 0, 0]
dtl = vtk.vtkLine.DistanceToLine((0, 0, 0), p1, p2, t, closest)
print(dtl, t, closest)
print(vtk.vtkMath.Distance2BetweenPoints(p1, p2))
p = [1, 2, 3]
project = [0, 0, 0]
plane = vtk.vtkPlane()
plane.SetOrigin(0, 0, 0)
plane.SetNormal(0, 0, 1)
plane.ProjectPoint(p, project)
print('distance:', p, project)
m = vtk.vtkMatrix4x4()
m.SetElement(0, 0, 1)
m.SetElement(0, 1, 0)
m.SetElement(0, 2, 0)
m.SetElement(0, 3, 0)
m.SetElement(1, 0, 0)
m.SetElement(1, 1, 2)
m.SetElement(1, 2, 0)
m.SetElement(1, 3, 0)
m.SetElement(2, 0, 0)
m.SetElement(2, 1, 0)
m.SetElement(2, 2, 3)
m.SetElement(2, 3, 0)
m.SetElement(3, 0, 0)
m.SetElement(3, 1, 0)
m.SetElement(3, 2, 0)
m.SetElement(3, 3, 4)
transform = vtk.vtkTransform()
transform.SetMatrix(m)
normalProjection = [1.0] * 3
mNorm = transform.TransformFloatPoint(normalProjection)
perspectiveTrans = vtk.vtkPerspectiveTransform()
perspectiveTrans.SetMatrix(m)
perspectiveProjection = [2] * 3
mPersp = perspectiveTrans.TransformFloatPoint(perspectiveProjection)
# m.Identity()
print('transform:', m.Determinant(), mNorm, mPersp,
m.MultiplyPoint((1, 1, 1, 1)))
def Locate(self, xyz):
if self.is_vtu:
cid = self.locator.FindCell(xyz, 0.0, self.gc, self.pc, self.wts)
if cid < 0 or min(self.wts[:4]) < 0 or max(self.wts[:4]) > 1:
self.xyz = []
return False
idl = vtk.vtkIdList()
self.dset.GetCellPoints(cid, idl)
self.ids = [idl.GetId(i) for i in range(idl.GetNumberOfIds())]
else:
vox = self.dset.FindAndGetCell(xyz, None, 0, 0.0, vtk.reference(self.sid), self.pc, self.wts)
if vox == None:
self.xyz = []
return None
self.ids = [vox.GetPointId(i) for i in range(vox.GetNumberOfPoints())]
self.xyz = xyz
return True
def testMethods(self):
"""Test overloaded methods"""
# single-argument method vtkTransform::SetMatrix()
t = vtk.vtkTransform()
m = vtk.vtkMatrix4x4()
m.SetElement(0, 0, 2)
t.SetMatrix(m)
self.assertEqual(t.GetMatrix().GetElement(0, 0), 2)
t.SetMatrix([0,1,0,0, 1,0,0,0, 0,0,-1,0, 0,0,0,1])
self.assertEqual(t.GetMatrix().GetElement(0, 0), 0)
# mixed number of arguments
fd = vtk.vtkFieldData()
fa = vtk.vtkFloatArray()
fa.SetName("Real")
ia = vtk.vtkIntArray()
ia.SetName("Integer")
fd.AddArray(fa)
fd.AddArray(ia)
a = fd.GetArray("Real")
self.assertEqual(id(a), id(fa))
i = vtk.reference(0)
a = fd.GetArray("Integer", i)
self.assertEqual(id(a), id(ia))
self.assertEqual(i, 1)
def project_landmarks_to_surface(self, mesh_name):
pd = self.multi_read_surface(mesh_name)
pd, t = self.apply_pre_transformation(pd)
clean = vtk.vtkCleanPolyData()
clean.SetInputData(pd)
# clean.SetInputConnection(pd.GetOutputPort())
clean.Update()
locator = vtk.vtkCellLocator()
locator.SetDataSet(clean.GetOutput())
locator.SetNumberOfCellsPerBucket(1)
locator.BuildLocator()
projected_landmarks = np.copy(self.landmarks)
n_landmarks = self.landmarks.shape[0]
for i in range(n_landmarks):
p = self.landmarks[i, :]
cell_id = vtk.mutable(0)
sub_id = vtk.mutable(0)
dist2 = vtk.reference(0)
tcp = np.zeros(3)
locator.FindClosestPoint(p, tcp, cell_id, sub_id, dist2)
# print('Nearest point in distance ', np.sqrt(np.float(dist2)))
projected_landmarks[i, :] = tcp
# self.landmarks = projected_landmarks
self.landmarks = self.transform_landmarks_to_original_space(
projected_landmarks, t)
del pd
del clean
del locator
closest.SetNumberOfIds(numProbes)
treeClosest = vtk.vtkIdList()
treeClosest.SetNumberOfIds(numProbes)
staticClosest = vtk.vtkIdList()
staticClosest.SetNumberOfIds(numProbes)
bspClosest = vtk.vtkIdList()
bspClosest.SetNumberOfIds(numProbes)
obbClosest = vtk.vtkIdList()
obbClosest.SetNumberOfIds(numProbes)
dsClosest = vtk.vtkIdList()
dsClosest.SetNumberOfIds(numProbes)
genCell = vtk.vtkGenericCell()
pc = [0,0,0]
weights = [0,0,0,0,0,0,0,0,0,0,0,0]
subId = vtk.reference(0)
# Print initial statistics
print("Processing NumCells: {0}".format(numCells))
print("\n")
timer = vtk.vtkTimerLog()
#############################################################
# Time the creation and building of the static cell locator
locator2 = vtk.vtkStaticCellLocator()
locator2.SetDataSet(output)
locator2.AutomaticOn()
locator2.SetNumberOfCellsPerNode(20)
locator2.CacheCellBoundsOn()
timer.StartTimer()
def rainfall_quad_cast(polydata, dimensions, ray_direction, precision,
region_of_interest, update_status):
# configure ray direction
dimensions = dimensions[::-1]
negated = 1 if ray_direction in [
RayDirection.R, RayDirection.A, RayDirection.S
] else -1
castIndex = None
if ray_direction is RayDirection.R or ray_direction is RayDirection.L:
castIndex = 0
elif ray_direction is RayDirection.A or ray_direction is RayDirection.P:
castIndex = 1
elif ray_direction is RayDirection.S or ray_direction is RayDirection.I:
castIndex = 2
castVector = [0.0, 0.0, 0.0]
castVector[castIndex] = 1.0 * negated
castPlaneIndices = [0, 1, 2]
castPlaneIndices.remove(castIndex)
preciseHorizontalBounds, preciseVerticalBounds = int(
float(dimensions[castPlaneIndices[0]]) / float(precision)), int(
float(dimensions[castPlaneIndices[1]]) / float(precision))
def build_ray(i, j):
start = [None, None, None]
start[castIndex] = dimensions[castIndex] * negated
start[castPlaneIndices[
0]] = -dimensions[castPlaneIndices[0]] / 2.0 + i * precision
start[castPlaneIndices[
1]] = -dimensions[castPlaneIndices[1]] / 2.0 + j * precision
end = start[:]
end[castIndex] = end[castIndex] * -1.0
return start, end
# build search tree
update_status(text="Building intersection object tree...", progress=41)
bspTree = vtk.vtkModifiedBSPTree()
bspTree.SetDataSet(polydata)
bspTree.BuildLocator()
# cast rays
update_status(text="Casting " +
str(preciseHorizontalBounds * preciseVerticalBounds) +
" rays downward...",
progress=42)
startTime = time.time()
points, temporaryHitPoint = vtk.vtkPoints(), [0.0, 0.0, 0.0]
hitPointMatrix = [[None for i in xrange(preciseHorizontalBounds)]
for j in reversed(xrange(preciseVerticalBounds))]
for i in reversed(xrange(preciseVerticalBounds)):
for j in xrange(preciseHorizontalBounds):
start, end = build_ray(i, j)
res = bspTree.IntersectWithLine(start, end, 0,
vtk.reference(0),
temporaryHitPoint,
[0.0, 0.0, 0.0],
vtk.reference(0),
vtk.reference(0))
if res != 0 and region_of_interest[0] <= temporaryHitPoint[
castIndex] < region_of_interest[1]:
temporaryHitPoint[
castIndex] += 0.3 * negated # raised to improve visibility
hitPointMatrix[i][j] = HitPoint(
points.InsertNextPoint(temporaryHitPoint),
temporaryHitPoint[:])
# form cells
update_status(text="Forming top layer polygons", progress=64)
cells = vtk.vtkCellArray()
for i in xrange(len(hitPointMatrix) - 1):
for j in xrange(len(hitPointMatrix[i]) - 1):
hitPoints = [
hitPointMatrix[i][j], hitPointMatrix[i + 1][j],
hitPointMatrix[i + 1][j + 1], hitPointMatrix[i][j + 1]
]
if None in hitPoints: continue
rawNormal = numpy.linalg.solve(
numpy.array([
hitPoints[0].point, hitPoints[1].point,
hitPoints[2].point
]), [1, 1, 1])
hitPointMatrix[i][j].normal = rawNormal / numpy.sqrt(
numpy.sum(rawNormal**2))
v1, v2 = numpy.array(
hitPointMatrix[i][j].normal), numpy.array(castVector)
degrees = numpy.degrees(
numpy.math.atan2(len(numpy.cross(v1, v2)),
numpy.dot(v1, v2)))
if degrees < 80:
cells.InsertNextCell(4, [p.pid for p in hitPoints])
update_status(text="Finished ray-casting in " +
str("%.1f" % (time.time() - startTime)) + "s, found " +
str(cells.GetNumberOfCells()) + " cells...",
progress=80)
# build polydata
topLayerPolyData = vtk.vtkPolyData()
topLayerPolyData.SetPoints(points)
topLayerPolyData.SetPolys(cells)
topLayerPolyData.Modified()
return topLayerPolyData, [
p for d0 in hitPointMatrix for p in d0 if p is not None
]
def ray_cast_color_thickness(poly_data,
hit_point_list,
cast_axis,
dimensions,
mm_of_air_past_bone,
update_status,
gradient_scale_factor=10.0):
# ray direction cast axis index
castIndex = BoneThicknessMappingLogic.determine_cast_axis_index(
cast_axis)
update_status(text="Building static cell locator...", progress=81)
cellLocator = vtk.vtkStaticCellLocator()
cellLocator.SetDataSet(poly_data)
cellLocator.BuildLocator()
total = len(hit_point_list)
update_status(text="Calculating thickness (may take long, " +
str(total) + " rays)...",
progress=82)
startTime = time.time()
def init_array(name):
a = vtk.vtkFloatArray()
a.SetName(name)
return a
def interpret_distance(points):
firstIn, lastOut = points[0], points[1]
if len(points) > 2:
for inOutPair in zip(*[iter(points[2:])] * 2):
# TODO incorporate cast bounds
# if newIn[1][cast_axis] < minBound and newOut[1][cast_axis] < minBound
if calculate_distance(
lastOut[1], inOutPair[0]
[1]) < mm_of_air_past_bone * gradient_scale_factor:
lastOut = inOutPair[1]
return calculate_distance(firstIn[1], lastOut[1])
else:
return calculate_distance(firstIn[1], points[-1][1])
def calculate_distance(point1, point2):
d = numpy.linalg.norm(
numpy.array((point1[0], point1[1], point1[2])) -
numpy.array((point2[0], point2[1], point2[2])))
d = d * gradient_scale_factor
return d
skullThicknessArray, airCellDistanceArray = init_array(
BoneThicknessMappingType.THICKNESS), init_array(
BoneThicknessMappingType.AIR_CELL)
tol, pCoords, subId = 0.000, [0, 0, 0], vtk.reference(0)
pointsOfIntersection, cellsOfIntersection = vtk.vtkPoints(
), vtk.vtkIdList()
for i, hitPoint in enumerate(hit_point_list):
stretchFactor = dimensions[castIndex]
start = [
hitPoint.point[0] + hitPoint.normal[0] * stretchFactor,
hitPoint.point[1] + hitPoint.normal[1] * stretchFactor,
hitPoint.point[2] + hitPoint.normal[2] * stretchFactor
]
end = [
hitPoint.point[0] - hitPoint.normal[0] * stretchFactor,
hitPoint.point[1] - hitPoint.normal[1] * stretchFactor,
hitPoint.point[2] - hitPoint.normal[2] * stretchFactor
]
cellLocator.FindCellsAlongLine(start, end, tol,
cellsOfIntersection)
distances = []
for cellIndex in range(cellsOfIntersection.GetNumberOfIds()):
t = vtk.reference(0.0)
p = [0.0, 0.0, 0.0]
if poly_data.GetCell(cellsOfIntersection.GetId(
cellIndex)).IntersectWithLine(
start, end, tol, t, p, pCoords,
subId) and 0.0 <= t <= 1.0:
distances.append([t, p])
if len(distances) >= 2:
distances = sorted(distances, key=lambda kv: kv[0])
skullThicknessArray.InsertTuple1(hitPoint.pid,
interpret_distance(distances))
airCellDistanceArray.InsertTuple1(
hitPoint.pid,
calculate_distance(distances[0][1], distances[1][1]))
else:
skullThicknessArray.InsertTuple1(hitPoint.pid, 0)
airCellDistanceArray.InsertTuple1(hitPoint.pid, 0)
# update rays casted status
if i % 200 == 0:
update_status(
text="Calculating thickness (~{0} of {1} rays)".format(
i, total),
progress=82 + int(round((i * 1.0 / total * 1.0) * 18.0)))
update_status(text="Finished thickness calculation in " +
str("%.1f" % (time.time() - startTime)) + "s...",
progress=100)
return skullThicknessArray, airCellDistanceArray
def rainfall_quad_cast(poly_data, seg_bounds, cast_axis, precision,
region_of_interest, update_status):
update_status(text="Building intersection object tree...", progress=41)
bspTree = vtk.vtkModifiedBSPTree()
bspTree.SetDataSet(poly_data)
bspTree.BuildLocator()
update_status(text="Calculating segmentation dimensions...",
progress=42)
negated = 1 if cast_axis in [
ctk.ctkAxesWidget.Right, ctk.ctkAxesWidget.Anterior,
ctk.ctkAxesWidget.Superior
] else -1
castIndex = BoneThicknessMappingLogic.determine_cast_axis_index(
cast_axis)
castVector = [0.0, 0.0, 0.0]
castVector[castIndex] = 1.0 * negated
castPlaneIndices = [0, 1, 2]
castPlaneIndices.remove(castIndex)
update_status(text="Calculating segmentation cast-plane...",
progress=43)
depthIncrements = [seg_bounds[castIndex], seg_bounds[castIndex + 1]]
if cast_axis in [
ctk.ctkAxesWidget.Right, ctk.ctkAxesWidget.Posterior,
ctk.ctkAxesWidget.Superior
]:
depthIncrements.reverse()
horizontalIncrements = [
seg_bounds[castPlaneIndices[0] * 2],
seg_bounds[castPlaneIndices[0] * 2 + 1]
]
verticalIncrements = [
seg_bounds[castPlaneIndices[1] * 2],
seg_bounds[castPlaneIndices[1] * 2 + 1]
]
castPlaneIncrements = [
int(
abs(horizontalIncrements[0] - horizontalIncrements[1]) /
precision),
int(
abs(verticalIncrements[0] - verticalIncrements[1]) /
precision),
]
def build_ray(i, j):
start = [None, None, None]
start[castIndex] = depthIncrements[0] + negated * 100
start[
castPlaneIndices[0]] = horizontalIncrements[0] + i * precision
start[castPlaneIndices[1]] = verticalIncrements[0] + j * precision
end = start[:]
end[castIndex] = depthIncrements[1] - negated * 100
return start, end
# cast rays
update_status(
text="Casting " +
str(int(castPlaneIncrements[0] * castPlaneIncrements[1])) +
" rays...",
progress=44)
startTime = time.time()
points, temporaryHitPoint = vtk.vtkPoints(), [0.0, 0.0, 0.0]
hitPointMatrix = [[None for j in range(castPlaneIncrements[1])]
for i in range(castPlaneIncrements[0])]
for i in range(len(hitPointMatrix)):
for j in range(len(hitPointMatrix[i])):
start, end = build_ray(i, j)
res = bspTree.IntersectWithLine(start, end, 0,
vtk.reference(0),
temporaryHitPoint,
[0.0, 0.0, 0.0],
vtk.reference(0),
vtk.reference(0))
# if hit is found, and the top hitpoint is within ROI bounds
if res != 0 and region_of_interest[0] <= temporaryHitPoint[
castIndex] < region_of_interest[1]:
temporaryHitPoint[
castIndex] += 0.3 * negated # raised to improve visibility
hitPointMatrix[i][j] = HitPoint(
points.InsertNextPoint(temporaryHitPoint),
temporaryHitPoint[:])
# form quads/cells
update_status(text="Forming top layer polygons", progress=64)
cells = vtk.vtkCellArray()
for i in range(len(hitPointMatrix) -
1): # -1 as the end row/col will be taken into account
for j in range(len(hitPointMatrix[i]) - 1):
hitPoints = [
hitPointMatrix[i][j], hitPointMatrix[i + 1][j],
hitPointMatrix[i + 1][j + 1], hitPointMatrix[i][j + 1]
]
# check if full quad
if None in hitPoints: continue
# check if area is not extremely large
d1 = numpy.linalg.norm(
numpy.array(hitPoints[0].point) -
numpy.array(hitPoints[1].point))
d2 = numpy.linalg.norm(
numpy.array(hitPoints[0].point) -
numpy.array(hitPoints[2].point))
d3 = numpy.linalg.norm(
numpy.array(hitPoints[0].point) -
numpy.array(hitPoints[3].point))
m = precision * 6
if d1 > m or d2 > m or d3 > m: continue
# calculate normals
rawNormal = numpy.linalg.solve(
numpy.array([
hitPoints[0].point, hitPoints[1].point,
hitPoints[2].point
]), [1, 1, 1])
hitPointMatrix[i][j].normal = rawNormal / numpy.sqrt(
numpy.sum(rawNormal**2))
# # check if quad is acceptable by normal vs. cast vector
# v1, v2 = numpy.array(hitPointMatrix[i][j].normal), numpy.array(castVector)
# degrees = numpy.degrees(numpy.math.atan2(numpy.cross(v1, v2).shape[0], numpy.dot(v1, v2)))
cells.InsertNextCell(4, [p.pid for p in hitPoints])
update_status(text="Finished ray-casting in " +
str("%.1f" % (time.time() - startTime)) + "s, found " +
str(cells.GetNumberOfCells()) + " cells...",
progress=80)
# build poly data
topLayerPolyData = vtk.vtkPolyData()
topLayerPolyData.SetPoints(points)
topLayerPolyData.SetPolys(cells)
topLayerPolyData.Modified()
return topLayerPolyData, [
p for d0 in hitPointMatrix for p in d0 if p is not None
]
sphere2.Update()
# Generate intersection points
center = sphere.GetCenter()
polyInts = vtk.vtkPolyData()
pts = vtk.vtkPoints()
spherePts = sphere2.GetOutput().GetPoints()
numRays = spherePts.GetNumberOfPoints()
pts.SetNumberOfPoints(numRays + 1)
polyRays = vtk.vtkPolyData()
rayPts = vtk.vtkPoints()
rayPts.SetNumberOfPoints(numRays + 1)
lines = vtk.vtkCellArray()
t = vtk.reference(0.0)
subId = vtk.reference(0)
cellId = vtk.reference(0)
xyz = [0.0,0.0,0.0]
xInt = [0.0,0.0,0.0]
pc = [0.0,0.0,0.0]
pts.SetPoint(0,center)
rayPts.SetPoint(0,center)
for i in range(0, numRays):
spherePts.GetPoint(i,xyz)
rayPts.SetPoint(i+1,xyz)
cellId = vtk.reference(i);
hit = loc.IntersectWithLine(xyz, center, 0.001, t, xInt, pc, subId, cellId)
if ( hit == 0 ):
print("Missed: {}".format(i))
sphere2.Update()
# Generate intersection points
center = sphere.GetCenter()
polyInts = vtk.vtkPolyData()
pts = vtk.vtkPoints()
spherePts = sphere2.GetOutput().GetPoints()
numRays = spherePts.GetNumberOfPoints()
pts.SetNumberOfPoints(numRays + 1)
polyRays = vtk.vtkPolyData()
rayPts = vtk.vtkPoints()
rayPts.SetNumberOfPoints(numRays + 1)
lines = vtk.vtkCellArray()
t = vtk.reference(0.0)
ptId = vtk.reference(0)
xyz = [0.0,0.0,0.0]
lineInt = [0.0,0.0,0.0]
xInt = [0.0,0.0,0.0]
pts.SetPoint(0,center)
rayPts.SetPoint(0,center)
for i in range(0, numRays):
spherePts.GetPoint(i,xyz)
rayPts.SetPoint(i+1,xyz)
cellId = vtk.reference(i);
hit = loc.IntersectWithLine(xyz, center, 0.05, t, lineInt, xInt, ptId)
if ( hit == 0 ):
print("Missed: {}".format(i))
pts.SetPoint(i+1,center)
def testStringReference(self):
m = vtk.reference("%s %s!")
m %= ("hello", "world")
self.assertEqual(m, "hello world!")
def project_new_point(self,point):
"""This function projects any point to the surface defined by the mesh.
Args:
point (array): coordinates of the point to project.
Returns:
projected_point (array): the coordinates of the projected point that lies in the surface.
intriangle (int): the index of the triangle where the projected point lies. If the point is outside surface, intriangle=-1.
"""
#Get the closest point
dist = 0.0
d = vtk.reference(dist)
node = self.tree.FindClosestPoint( point, d )
#d, node=self.tree.query(point)
#print d, node
#Get triangles connected to that node
triangles=self.node_to_tri[node]
#print triangles
#Compute the vertex normal as the avergage of the triangle normals.
vertex_normal=np.sum(self.normals[triangles],axis=0)
#Normalize
vertex_normal=vertex_normal/np.linalg.norm(vertex_normal)
#Project to the point to the closest vertex plane
pre_projected_point=point-vertex_normal*np.dot(point-self.verts[node],vertex_normal)
#Calculate the distance from point to plane (Closest point projection)
CPP=[]
for tri in triangles:
CPP.append(np.dot(pre_projected_point-self.verts[self.connectivity[tri,0],:],self.normals[tri,:]))
CPP=np.array(CPP)
# print 'CPP=',CPP
triangles=np.array(triangles)
#Sort from closest to furthest
order=np.abs(CPP).argsort()
# print CPP[order]
#Check if point is in triangle
intriangle=-1
for o in order:
i=triangles[o]
# print i
projected_point=(pre_projected_point-CPP[o]*self.normals[i,:])
# print projected_point
u=self.verts[self.connectivity[i,1],:]-self.verts[self.connectivity[i,0],:]
v=self.verts[self.connectivity[i,2],:]-self.verts[self.connectivity[i,0],:]
w=projected_point-self.verts[self.connectivity[i,0],:]
# print 'check ortogonality',np.dot(w,self.normals[i,:])
vxw=np.cross(v,w)
vxu=np.cross(v,u)
uxw=np.cross(u,w)
sign_r=np.dot(vxw,vxu)
sign_t=np.dot(uxw,-vxu)
# print sign_r,sign_t
if sign_r>=0 and sign_t>=0:
r=np.linalg.norm(vxw)/np.linalg.norm(vxu)
t=np.linalg.norm(uxw)/np.linalg.norm(vxu)
# print 'sign ok', r , t
if r<=1 and t<=1 and (r+t)<=1.001:
# print 'in triangle',i
intriangle = i
break
return projected_point, intriangle
def superpose(self):
"""Superpose results from multiple output files.
Returns:
[N x F mat]: superposition results. N = No. of query points, F = No. of field properties.
Note:
self.queryPoints is a concatenation of [evaluation points, query mesh points]. Superposition is done for both together, but results are separated at the end.
"""
print("> Superposing {} tires".format(len(self.tireCoordinates)))
superposition = np.zeros(
(len(self.queryPoints), len(cfg.FEM_FIELDS_3D)))
# 0. Parameter placeholder for cell locator
closest_point = [0.0, 0.0,
0.0] # coordinate of closest point (to be returned)
gen_cell = vtk.vtkGenericCell(
) # when having many query points, accelerate the cell locator by allocating once
cell_id = vtk.reference(0) # located cell (to be returned)
sub_id = vtk.reference(0) # rarely used (to be returned)
dist2 = vtk.reference(
0.0) # squared distance to the closest point (to be returned)
# 1. Superpose all tires at every query point
tires = self.tireCoordinates
for i in range(
len(tires)
): # for one tire, query all points and accumulate in result
# mesh data
mesh = readVTK(self.outputFileList[i])
pointData = mesh.GetPointData()
# cellData = mesh.GetCellData()
cellLocator = getCellLocator(mesh)
X = vtk_to_numpy(pointData.GetArray('Radial_Distance'))
Y = vtk_to_numpy(pointData.GetArray('Depth'))
fields = np.array([
vtk_to_numpy(pointData.GetArray(f)) for f in cfg.FEM_FIELDS_2D
]).T
# query all points
for idx in range(len(self.queryPoints)):
pt = self.queryPoints[idx]
radial = np.sqrt(
(tires[i, 0] - pt[0])**2 + (tires[i, 1] - pt[1])**
2) # radial distance from query point to tire location
depth = pt[2]
# find cell
cellLocator.FindClosestPoint([radial, depth, 0.0],
closest_point, gen_cell, cell_id,
sub_id, dist2)
elementShape = self.elementTypeMap[mesh.GetCellType(
cell_id.get())]
# get point list of the cell
vtk_point_list = vtk.vtkIdList()
mesh.GetCellPoints(cell_id.get(), vtk_point_list)
point_list = [
vtk_point_list.GetId(i)
for i in range(vtk_point_list.GetNumberOfIds())
]
# get shape functions at the query point(s)
coord_nodes = np.hstack(
(X[point_list].reshape(-1, 1), Y[point_list].reshape(
-1, 1))) # global coord of element nodes
coord_querys = np.array([radial, depth]).reshape(
-1, 2) # global coord of query points
shape_function = elementShape.query_shape(
coord_nodes, coord_querys) # see class ShapeQ8
# interpolate the fields & accumulate/superpose
interpolated = np.squeeze(
np.matmul(shape_function, fields[
point_list, :])) # for Q8 & 6 fields, 1x8 * 8x6 = 1x6
# now six fields are cfg.FEM_FIELDS_2D = ['Displacement_Z', 'Displacement_R', 'Stress_R', 'Stress_Theta', 'Stress_Z', 'Stress_Shear']
# decompose radial displacement and stress into plane X-Y
# projection cos(t) = a * b / (|a||b|) where |a|=|b|=1, normalized
disp_R, stress_R = interpolated[1], interpolated[2]
radial_vec = pt[:-1] - tires[i] # vector
if np.linalg.norm(radial_vec) == 0:
# if the query point is exactly AT any tire location, radial_vec is (0,0)
disp_X = disp_R
disp_Y = disp_R
disp_Z = interpolated[0]
stress_X = stress_R
stress_Y = stress_R
stress_Z = interpolated[4]
else:
radial_vec = radial_vec / np.linalg.norm(
radial_vec) # normalization
disp_X = np.dot(radial_vec, np.array([1, 0])) * disp_R
disp_Y = np.dot(radial_vec, np.array([0, 1])) * disp_R
disp_Z = interpolated[0]
stress_X = np.dot(radial_vec, np.array([1, 0])) * stress_R
stress_Y = np.dot(radial_vec, np.array([0, 1])) * stress_R
stress_Z = interpolated[4]
# accumulate results
superposition[idx, :] += np.array(
[disp_X, disp_Y, disp_Z, stress_X, stress_Y, stress_Z])
# 2. Separate evaluation point results from mesh points results
self.results_eval, self.results_grid = np.split(
superposition, [len(self.evalPoints) * len(cfg.DEPTH_COORDS)])
self.results_eval = self.results_eval.reshape(
len(self.evalPoints), len(cfg.DEPTH_COORDS),
len(cfg.FEM_FIELDS_3D)) # P x D x 6
for p in range(len(self.results_eval)):
print("Evaluation point {} ({},{}):".format(
p, self.evalPoints[p, 0], self.evalPoints[p, 1]))
print(self.results_eval[p][:, 2])
staticClosest.SetId(i, staticLocator.FindClosestPoint(probePoints.GetPoint(i)))
staticTimer.StopTimer()
staticOpTime = staticTimer.GetElapsedTime()
print(" Static Closest point probing: {0}".format(staticOpTime))
print(" Divisions: {0}".format( staticLocator.GetDivisions() ))
# Poke other methods before deleting static locator class
staticClosestN = vtk.vtkIdList()
staticLocator.FindClosestNPoints(10, probePoints.GetPoint(0), staticClosestN)
# Intersect with line
# Out of plane line intersecction
a0 = [0.5, 0.5, 1]
a1 = [0.5, 0.5, -1]
tol = 0.001
t = vtk.reference(0.0)
lineX = [0.0,0.0,0.0]
ptX = [0.0,0.0,0.0]
ptId = vtk.reference(-100)
staticLocator.IntersectWithLine(a0,a1,tol,t,lineX,ptX,ptId)
print(" Out of plane line intersection: PtId {0}".format(ptId))
# In plane line intersection
a0 = [-1.5, 0.5, 0]
a1 = [ 1.5, 0.5, 0]
tol = 0.001
t = vtk.reference(0.0)
lineX = [0.0,0.0,0.0]
ptX = [0.0,0.0,0.0]
ptId = vtk.reference(-100)
staticLocator.IntersectWithLine(a0,a1,tol,t,lineX,ptX,ptId)
# Clip data to spit out unstructured tets clipper = vtk.vtkClipDataSet() clipper.SetInputConnection(mandel.GetOutputPort()) clipper.SetClipFunction(sphere) clipper.InsideOutOn() clipper.Update() output = clipper.GetOutput() numCells = output.GetNumberOfCells() bounds = output.GetBounds() #print bounds # Support subsequent method calls genCell = vtk.vtkGenericCell() t = vtk.reference(0.0) x = [0,0,0] pc = [0,0,0] subId = vtk.reference(0) cellId = vtk.reference(0) # Build the locator locator = vtk.vtkStaticCellLocator() #locator = vtk.vtkCellLocator() locator.SetDataSet(output) locator.AutomaticOn() locator.SetNumberOfCellsPerNode(20) locator.CacheCellBoundsOn() locator.BuildLocator() # Now visualize the locator
def testIntReference(self):
m = vtk.reference(3)
n = vtk.reference(4)
m |= n
self.assertEqual(m, 7.0)
self.assertEqual(str(m), str(m.get()))
def testTupleReference(self):
m = vtk.reference((0,))
self.assertEqual(m, (0,))
self.assertEqual(len(m), 1)
self.assertEqual(m[0], 0)
