def unary_operations(self):
operand = Expr.parse_value_expr(self.expr.operand, self.context)
if isinstance(self.expr.op, ast.Not):
if isinstance(operand.typ, BaseType) and operand.typ.typ == 'bool':
return LLLnode.from_list(["iszero", operand],
typ='bool',
pos=getpos(self.expr))
else:
raise TypeMismatchException(
"Only bool is supported for not operation, %r supplied." %
operand.typ,
self.expr,
)
elif isinstance(self.expr.op, ast.USub):
if not is_numeric_type(operand.typ):
raise TypeMismatchException(
"Unsupported type for negation: %r" % operand.typ,
operand,
)
if operand.typ.is_literal and 'int' in operand.typ.typ:
num = ast.Num(n=0 - operand.value)
num.source_code = self.expr.source_code
num.lineno = self.expr.lineno
num.col_offset = self.expr.col_offset
return Expr.parse_value_expr(num, self.context)
return LLLnode.from_list(["sub", 0, operand],
typ=operand.typ,
pos=getpos(self.expr))
else:
raise StructureException(
"Only the 'not' unary operator is supported")
def abi_type_to_ast(atype, expected_size):
if atype in ('int128', 'uint256', 'bool', 'address', 'bytes32'):
return ast.Name(id=atype)
elif atype == 'fixed168x10':
return ast.Name(id='decimal')
elif atype in ('bytes', 'string'):
# expected_size is the maximum length for inputs, minimum length for outputs
return ast.Subscript(value=ast.Name(id=atype),
slice=ast.Index(value=ast.Num(n=expected_size)))
else:
raise ParserException(f'Type {atype} not supported by vyper.')
def unary_operations(self):
operand = Expr.parse_value_expr(self.expr.operand, self.context)
if isinstance(self.expr.op, ast.Not):
if isinstance(operand.typ, BaseType) and operand.typ.typ == 'bool':
return LLLnode.from_list(["iszero", operand],
typ='bool',
pos=getpos(self.expr))
else:
raise TypeMismatchException(
f"Only bool is supported for not operation, {operand.typ} supplied.",
self.expr,
)
elif isinstance(self.expr.op, ast.USub):
# Must be a signed integer
if not is_numeric_type(
operand.typ) or operand.typ.typ.lower().startswith('u'):
raise TypeMismatchException(
f"Unsupported type for negation: {operand.typ}",
operand,
)
if operand.typ.is_literal and 'int' in operand.typ.typ:
num = ast.Num(n=0 - operand.value)
num.source_code = self.expr.source_code
num.lineno = self.expr.lineno
num.col_offset = self.expr.col_offset
num.end_lineno = self.expr.end_lineno
num.end_col_offset = self.expr.end_col_offset
return Expr.parse_value_expr(num, self.context)
# Clamp on minimum integer value as we cannot negate that value
# (all other integer values are fine)
min_int_val = get_min_val_for_type(operand.typ.typ)
return LLLnode.from_list(
["sub", 0, ["clampgt", operand, min_int_val]],
typ=operand.typ,
pos=getpos(self.expr))
else:
raise StructureException(
"Only the 'not' or 'neg' unary operators are supported")
def arithmetic(self):
left = Expr.parse_value_expr(self.expr.left, self.context)
right = Expr.parse_value_expr(self.expr.right, self.context)
if not is_numeric_type(left.typ) or not is_numeric_type(right.typ):
raise TypeMismatchException(
f"Unsupported types for arithmetic op: {left.typ} {right.typ}",
self.expr,
)
arithmetic_pair = {left.typ.typ, right.typ.typ}
# Special Case: Simplify any literal to literal arithmetic at compile time.
if left.typ.is_literal and right.typ.is_literal and \
isinstance(right.value, int) and isinstance(left.value, int) and \
arithmetic_pair.issubset({'uint256', 'int128'}):
if isinstance(self.expr.op, ast.Add):
val = left.value + right.value
elif isinstance(self.expr.op, ast.Sub):
val = left.value - right.value
elif isinstance(self.expr.op, ast.Mult):
val = left.value * right.value
elif isinstance(self.expr.op, ast.Div):
val = left.value // right.value
elif isinstance(self.expr.op, ast.Mod):
val = left.value % right.value
elif isinstance(self.expr.op, ast.Pow):
val = left.value ** right.value
else:
raise ParserException(
f'Unsupported literal operator: {str(type(self.expr.op))}',
self.expr,
)
num = ast.Num(n=val)
num.source_code = self.expr.source_code
num.lineno = self.expr.lineno
num.col_offset = self.expr.col_offset
num.end_lineno = self.expr.end_lineno
num.end_col_offset = self.expr.end_col_offset
return Expr.parse_value_expr(num, self.context)
pos = getpos(self.expr)
# Special case with uint256 were int literal may be casted.
if arithmetic_pair == {'uint256', 'int128'}:
# Check right side literal.
if right.typ.is_literal and SizeLimits.in_bounds('uint256', right.value):
right = LLLnode.from_list(
right.value,
typ=BaseType('uint256', None, is_literal=True),
pos=pos,
)
# Check left side literal.
elif left.typ.is_literal and SizeLimits.in_bounds('uint256', left.value):
left = LLLnode.from_list(
left.value,
typ=BaseType('uint256', None, is_literal=True),
pos=pos,
)
# Only allow explicit conversions to occur.
if left.typ.typ != right.typ.typ:
raise TypeMismatchException(
f"Cannot implicitly convert {left.typ.typ} to {right.typ.typ}.",
self.expr,
)
ltyp, rtyp = left.typ.typ, right.typ.typ
if isinstance(self.expr.op, (ast.Add, ast.Sub)):
if left.typ.unit != right.typ.unit and left.typ.unit != {} and right.typ.unit != {}:
raise TypeMismatchException(
f"Unit mismatch: {left.typ.unit} {right.typ.unit}",
self.expr,
)
if left.typ.positional and right.typ.positional and isinstance(self.expr.op, ast.Add):
raise TypeMismatchException(
"Cannot add two positional units!",
self.expr,
)
new_unit = left.typ.unit or right.typ.unit
# xor, as subtracting two positionals gives a delta
new_positional = left.typ.positional ^ right.typ.positional
new_typ = BaseType(ltyp, new_unit, new_positional)
op = 'add' if isinstance(self.expr.op, ast.Add) else 'sub'
if ltyp == 'uint256' and isinstance(self.expr.op, ast.Add):
# safeadd
arith = ['seq',
['assert', ['ge', ['add', 'l', 'r'], 'l']],
['add', 'l', 'r']]
elif ltyp == 'uint256' and isinstance(self.expr.op, ast.Sub):
# safesub
arith = ['seq',
['assert', ['ge', 'l', 'r']],
['sub', 'l', 'r']]
elif ltyp == rtyp:
arith = [op, 'l', 'r']
else:
raise Exception(f"Unsupported Operation '{op}({ltyp}, {rtyp})'")
elif isinstance(self.expr.op, ast.Mult):
if left.typ.positional or right.typ.positional:
raise TypeMismatchException("Cannot multiply positional values!", self.expr)
new_unit = combine_units(left.typ.unit, right.typ.unit)
new_typ = BaseType(ltyp, new_unit)
if ltyp == rtyp == 'uint256':
arith = ['with', 'ans', ['mul', 'l', 'r'],
['seq',
['assert',
['or',
['eq', ['div', 'ans', 'l'], 'r'],
['iszero', 'l']]],
'ans']]
elif ltyp == rtyp == 'int128':
# TODO should this be 'smul' (note edge cases in YP for smul)
arith = ['mul', 'l', 'r']
elif ltyp == rtyp == 'decimal':
# TODO should this be smul
arith = ['with', 'ans', ['mul', 'l', 'r'],
['seq',
['assert',
['or',
['eq', ['sdiv', 'ans', 'l'], 'r'],
['iszero', 'l']]],
['sdiv', 'ans', DECIMAL_DIVISOR]]]
else:
raise Exception(f"Unsupported Operation 'mul({ltyp}, {rtyp})'")
elif isinstance(self.expr.op, ast.Div):
if left.typ.positional or right.typ.positional:
raise TypeMismatchException("Cannot divide positional values!", self.expr)
new_unit = combine_units(left.typ.unit, right.typ.unit, div=True)
new_typ = BaseType(ltyp, new_unit)
if ltyp == rtyp == 'uint256':
arith = ['div', 'l', ['clamp_nonzero', 'r']]
elif ltyp == rtyp == 'int128':
arith = ['sdiv', 'l', ['clamp_nonzero', 'r']]
elif ltyp == rtyp == 'decimal':
arith = ['sdiv',
# TODO check overflow cases, also should it be smul
['mul', 'l', DECIMAL_DIVISOR],
['clamp_nonzero', 'r']]
else:
raise Exception(f"Unsupported Operation 'div({ltyp}, {rtyp})'")
elif isinstance(self.expr.op, ast.Mod):
if left.typ.positional or right.typ.positional:
raise TypeMismatchException(
"Cannot use positional values as modulus arguments!",
self.expr,
)
if not are_units_compatible(left.typ, right.typ) and not (left.typ.unit or right.typ.unit): # noqa: E501
raise TypeMismatchException("Modulus arguments must have same unit", self.expr)
new_unit = left.typ.unit or right.typ.unit
new_typ = BaseType(ltyp, new_unit)
if ltyp == rtyp == 'uint256':
arith = ['mod', 'l', ['clamp_nonzero', 'r']]
elif ltyp == rtyp:
# TODO should this be regular mod
arith = ['smod', 'l', ['clamp_nonzero', 'r']]
else:
raise Exception(f"Unsupported Operation 'mod({ltyp}, {rtyp})'")
elif isinstance(self.expr.op, ast.Pow):
if left.typ.positional or right.typ.positional:
raise TypeMismatchException(
"Cannot use positional values as exponential arguments!",
self.expr,
)
if right.typ.unit:
raise TypeMismatchException(
"Cannot use unit values as exponents",
self.expr,
)
if ltyp != 'int128' and ltyp != 'uint256' and isinstance(self.expr.right, ast.Name):
raise TypeMismatchException(
"Cannot use dynamic values as exponents, for unit base types",
self.expr,
)
new_unit = left.typ.unit
if left.typ.unit and not isinstance(self.expr.right, ast.Name):
new_unit = {left.typ.unit.copy().popitem()[0]: self.expr.right.n}
new_typ = BaseType(ltyp, new_unit)
if ltyp == rtyp == 'uint256':
arith = ['seq',
['assert',
['or',
# r == 1 | iszero(r)
# could be simplified to ~(r & 1)
['or', ['eq', 'r', 1], ['iszero', 'r']],
['lt', 'l', ['exp', 'l', 'r']]]],
['exp', 'l', 'r']]
elif ltyp == rtyp == 'int128':
arith = ['exp', 'l', 'r']
else:
raise TypeMismatchException('Only whole number exponents are supported', self.expr)
else:
raise ParserException(f"Unsupported binary operator: {self.expr.op}", self.expr)
p = ['seq']
if new_typ.typ == 'int128':
p.append([
'clamp',
['mload', MemoryPositions.MINNUM],
arith,
['mload', MemoryPositions.MAXNUM],
])
elif new_typ.typ == 'decimal':
p.append([
'clamp',
['mload', MemoryPositions.MINDECIMAL],
arith,
['mload', MemoryPositions.MAXDECIMAL],
])
elif new_typ.typ == 'uint256':
p.append(arith)
else:
raise Exception(f"{arith} {new_typ}")
p = ['with', 'l', left, ['with', 'r', right, p]]
return LLLnode.from_list(p, typ=new_typ, pos=pos)
def arithmetic(self):
pre_alloc_left, left = self.arithmetic_get_reference(self.expr.left)
pre_alloc_right, right = self.arithmetic_get_reference(self.expr.right)
if not is_numeric_type(left.typ) or not is_numeric_type(right.typ):
raise TypeMismatchException(
"Unsupported types for arithmetic op: %r %r" %
(left.typ, right.typ),
self.expr,
)
arithmetic_pair = {left.typ.typ, right.typ.typ}
# Special Case: Simplify any literal to literal arithmetic at compile time.
if left.typ.is_literal and right.typ.is_literal and \
isinstance(right.value, int) and isinstance(left.value, int) and \
arithmetic_pair.issubset({'uint256', 'int128'}):
if isinstance(self.expr.op, ast.Add):
val = left.value + right.value
elif isinstance(self.expr.op, ast.Sub):
val = left.value - right.value
elif isinstance(self.expr.op, ast.Mult):
val = left.value * right.value
elif isinstance(self.expr.op, ast.Div):
val = left.value // right.value
elif isinstance(self.expr.op, ast.Mod):
val = left.value % right.value
elif isinstance(self.expr.op, ast.Pow):
val = left.value**right.value
else:
raise ParserException(
'Unsupported literal operator: %s' %
str(type(self.expr.op)),
self.expr,
)
num = ast.Num(n=val)
num.source_code = self.expr.source_code
num.lineno = self.expr.lineno
num.col_offset = self.expr.col_offset
return Expr.parse_value_expr(num, self.context)
# Special case with uint256 were int literal may be casted.
if arithmetic_pair == {'uint256', 'int128'}:
# Check right side literal.
if right.typ.is_literal and SizeLimits.in_bounds(
'uint256', right.value):
right = LLLnode.from_list(
right.value,
typ=BaseType('uint256', None, is_literal=True),
pos=getpos(self.expr),
)
# Check left side literal.
elif left.typ.is_literal and SizeLimits.in_bounds(
'uint256', left.value):
left = LLLnode.from_list(
left.value,
typ=BaseType('uint256', None, is_literal=True),
pos=getpos(self.expr),
)
# Only allow explicit conversions to occur.
if left.typ.typ != right.typ.typ:
raise TypeMismatchException(
"Cannot implicitly convert {} to {}.".format(
left.typ.typ, right.typ.typ),
self.expr,
)
ltyp, rtyp = left.typ.typ, right.typ.typ
if isinstance(self.expr.op, (ast.Add, ast.Sub)):
if left.typ.unit != right.typ.unit and left.typ.unit != {} and right.typ.unit != {}:
raise TypeMismatchException(
"Unit mismatch: %r %r" % (left.typ.unit, right.typ.unit),
self.expr,
)
if left.typ.positional and right.typ.positional and isinstance(
self.expr.op, ast.Add):
raise TypeMismatchException(
"Cannot add two positional units!",
self.expr,
)
new_unit = left.typ.unit or right.typ.unit
# xor, as subtracting two positionals gives a delta
new_positional = left.typ.positional ^ right.typ.positional
op = 'add' if isinstance(self.expr.op, ast.Add) else 'sub'
if ltyp == 'uint256' and isinstance(self.expr.op, ast.Add):
o = LLLnode.from_list(
[
'seq',
# Checks that: a + b >= a
['assert', ['ge', ['add', left, right], left]],
['add', left, right],
],
typ=BaseType('uint256', new_unit, new_positional),
pos=getpos(self.expr))
elif ltyp == 'uint256' and isinstance(self.expr.op, ast.Sub):
o = LLLnode.from_list(
[
'seq',
# Checks that: a >= b
['assert', ['ge', left, right]],
['sub', left, right]
],
typ=BaseType('uint256', new_unit, new_positional),
pos=getpos(self.expr))
elif ltyp == rtyp:
o = LLLnode.from_list(
[op, left, right],
typ=BaseType(ltyp, new_unit, new_positional),
pos=getpos(self.expr),
)
else:
raise Exception("Unsupported Operation '%r(%r, %r)'" %
(op, ltyp, rtyp))
elif isinstance(self.expr.op, ast.Mult):
if left.typ.positional or right.typ.positional:
raise TypeMismatchException(
"Cannot multiply positional values!", self.expr)
new_unit = combine_units(left.typ.unit, right.typ.unit)
if ltyp == rtyp == 'uint256':
o = LLLnode.from_list([
'if',
['eq', left, 0],
[0],
[
'seq',
[
'assert',
['eq', ['div', ['mul', left, right], left], right]
], ['mul', left, right]
],
],
typ=BaseType('uint256', new_unit),
pos=getpos(self.expr))
elif ltyp == rtyp == 'int128':
o = LLLnode.from_list(
['mul', left, right],
typ=BaseType('int128', new_unit),
pos=getpos(self.expr),
)
elif ltyp == rtyp == 'decimal':
o = LLLnode.from_list([
'with',
'r',
right,
[
'with',
'l',
left,
[
'with',
'ans',
['mul', 'l', 'r'],
[
'seq',
[
'assert',
[
'or', [
'eq', ['sdiv', 'ans', 'l'], 'r'
], ['iszero', 'l']
]
],
['sdiv', 'ans', DECIMAL_DIVISOR],
],
],
],
],
typ=BaseType('decimal', new_unit),
pos=getpos(self.expr))
else:
raise Exception("Unsupported Operation 'mul(%r, %r)'" %
(ltyp, rtyp))
elif isinstance(self.expr.op, ast.Div):
if left.typ.positional or right.typ.positional:
raise TypeMismatchException("Cannot divide positional values!",
self.expr)
new_unit = combine_units(left.typ.unit, right.typ.unit, div=True)
if ltyp == rtyp == 'uint256':
o = LLLnode.from_list(
[
'seq',
# Checks that: b != 0
['assert', right],
['div', left, right],
],
typ=BaseType('uint256', new_unit),
pos=getpos(self.expr))
elif ltyp == rtyp == 'int128':
o = LLLnode.from_list(
['sdiv', left, ['clamp_nonzero', right]],
typ=BaseType('int128', new_unit),
pos=getpos(self.expr),
)
elif ltyp == rtyp == 'decimal':
o = LLLnode.from_list([
'with', 'l', left,
[
'with',
'r',
['clamp_nonzero', right],
[
'sdiv',
['mul', 'l', DECIMAL_DIVISOR],
'r',
],
]
],
typ=BaseType('decimal', new_unit),
pos=getpos(self.expr))
else:
raise Exception("Unsupported Operation 'div(%r, %r)'" %
(ltyp, rtyp))
elif isinstance(self.expr.op, ast.Mod):
if left.typ.positional or right.typ.positional:
raise TypeMismatchException(
"Cannot use positional values as modulus arguments!",
self.expr,
)
if not are_units_compatible(left.typ, right.typ) and not (
left.typ.unit or right.typ.unit): # noqa: E501
raise TypeMismatchException(
"Modulus arguments must have same unit", self.expr)
new_unit = left.typ.unit or right.typ.unit
if ltyp == rtyp == 'uint256':
o = LLLnode.from_list(
['seq', ['assert', right], ['mod', left, right]],
typ=BaseType('uint256', new_unit),
pos=getpos(self.expr))
elif ltyp == rtyp:
o = LLLnode.from_list(
['smod', left, ['clamp_nonzero', right]],
typ=BaseType(ltyp, new_unit),
pos=getpos(self.expr),
)
else:
raise Exception("Unsupported Operation 'mod(%r, %r)'" %
(ltyp, rtyp))
elif isinstance(self.expr.op, ast.Pow):
if left.typ.positional or right.typ.positional:
raise TypeMismatchException(
"Cannot use positional values as exponential arguments!",
self.expr,
)
if right.typ.unit:
raise TypeMismatchException(
"Cannot use unit values as exponents",
self.expr,
)
if ltyp != 'int128' and ltyp != 'uint256' and isinstance(
self.expr.right, ast.Name):
raise TypeMismatchException(
"Cannot use dynamic values as exponents, for unit base types",
self.expr,
)
if ltyp == rtyp == 'uint256':
o = LLLnode.from_list([
'seq',
[
'assert',
[
'or', ['or', ['eq', right, 1], ['iszero', right]],
['lt', left, ['exp', left, right]]
],
],
['exp', left, right],
],
typ=BaseType('uint256'),
pos=getpos(self.expr))
elif ltyp == rtyp == 'int128':
new_unit = left.typ.unit
if left.typ.unit and not isinstance(self.expr.right, ast.Name):
new_unit = {
left.typ.unit.copy().popitem()[0]: self.expr.right.n
}
o = LLLnode.from_list(
['exp', left, right],
typ=BaseType('int128', new_unit),
pos=getpos(self.expr),
)
else:
raise TypeMismatchException(
'Only whole number exponents are supported', self.expr)
else:
raise ParserException(
"Unsupported binary operator: %r" % self.expr.op, self.expr)
p = ['seq']
if pre_alloc_left:
p.append(pre_alloc_left)
if pre_alloc_right:
p.append(pre_alloc_right)
if o.typ.typ == 'int128':
p.append([
'clamp',
['mload', MemoryPositions.MINNUM],
o,
['mload', MemoryPositions.MAXNUM],
])
return LLLnode.from_list(p, typ=o.typ, pos=getpos(self.expr))
elif o.typ.typ == 'decimal':
p.append([
'clamp',
['mload', MemoryPositions.MINDECIMAL],
o,
['mload', MemoryPositions.MAXDECIMAL],
])
return LLLnode.from_list(p, typ=o.typ, pos=getpos(self.expr))
if o.typ.typ == 'uint256':
p.append(o)
return LLLnode.from_list(p, typ=o.typ, pos=getpos(self.expr))
else:
raise Exception("%r %r" % (o, o.typ))
