def __init__(self):
self.addr = tools.get_random_uuid()
#print("My UUID is : %s" % self.addr)
self.engine = Engine()
self.dev = Device("cli.experimental", self.addr)
self.engine.add_device(self.dev)
def run():
print("Monitor test")
eng = Engine()
mon = monitor_example(eng)
try:
eng.run()
except KeyboardInterrupt:
import pdb
pdb.set_trace()
class xAALProxy:
def __init__(self):
self.addr = tools.get_random_uuid()
#print("My UUID is : %s" % self.addr)
self.engine = Engine()
self.dev = Device("cli.experimental", self.addr)
self.engine.add_device(self.dev)
#self.eng.add_rx_handler(self.parse_answer)
def sendmsg(self, target, action, key=None, value=None):
addr = config.getConfigInfo(target,
"xaaladdr") #hdrware addr of the equpmt
print addr
self.engine.send_request(self.dev, [addr], action, None)
#addr 224.0.29.200, port 1235
#self.engine.get_network_connector().send(data)
def recvmsg(self):
data = self.engine.receive_msg()
return data
def filtmsg(self):
self.engine.add_rx_handler(getalerte)
self.engine.run()
def __init__(self):
self.addr = tools.get_random_uuid()
self.engine = Engine()
self.dev = Device("cli.experimental", self.addr)
self.dev.vendor_id = 'IHSEV'
self.dev.info = 'chute'
self.engine.add_device(self.dev)
self.threadlist = []
self.fallEvent = threading.Event()
self.pepper = Pepper(self)
self.kinect = Kinect()
self.sensfloor = Sensfloor(self.engine)
def main():
if len(sys.argv) == 2:
addr = sys.argv[1]
if tools.is_valid_addr(addr):
t0 = time.time()
eng = Engine()
eng.start()
dev = QueryDB(eng)
dev.query(addr)
print("Time : %0.3f sec" % (time.time() - t0))
else:
print("Invalid addr")
else:
usage()
def setup():
""" setup xAAL Engine & Device. And start it in a Greenlet"""
helpers.setup_console_logger()
global monitor
engine = Engine()
cfg = tools.load_cfg(PACKAGE_NAME)
if not cfg:
logger.info('Missing config file, building a new one')
cfg = tools.new_cfg(PACKAGE_NAME)
cfg.write()
dev = Device("hmi.basic")
dev.address = cfg['config']['addr']
dev.vendor_id = "IHSEV"
dev.product_id = "WEB Interface"
dev.version = 0.1
dev.info = "%s@%s" % (PACKAGE_NAME, platform.node())
engine.add_device(dev)
db_server = None
if 'db_server' in cfg['config']:
db_server = cfg['config']['db_server']
else:
logger.info('You can set "db_server" in the config file')
monitor = Monitor(dev, filter_func=monitor_filter, db_server=db_server)
monitor.subscribe(event_handler)
engine.start()
green_let = Greenlet(xaal_loop, engine)
green_let.start()
def main(addr):
if addr == None:
addr = tools.get_random_uuid()
dev = Device("switch.basic",addr)
dev.product_id = 'One Simple test of Switch'
dev.url = 'http://www.acme.org'
# attributes
state = dev.new_attribute('state')
dev.dump()
# methods
def on():
state.value = True
print("%s ON" % dev)
def off():
state.value = False
print("%s OFF" %dev)
dev.add_method('on',on)
dev.add_method('off',off)
eng = Engine()
eng.add_device(dev)
#eng.run()
eng.start()
def main(addr):
if addr == None:
addr = tools.get_random_uuid()
dev = Device("lamp.dimmer", addr)
dev.product_id = 'Dummy Dimming Lamp'
dev.url = 'http://www.acme.org'
# attributes
light = dev.new_attribute('light')
dimmer = dev.new_attribute('dimmer', 50)
dev.dump()
# methods
def on():
light.value = True
print("%s ON" % dev)
def off():
light.value = False
print("%s OFF" % dev)
def dim(_target):
dimmer.value = _target
print("Dimming to %d" % _target)
dev.add_method('on', on)
dev.add_method('off', off)
dev.add_method('dim', dim)
eng = Engine()
eng.add_device(dev)
eng.run()
def main(addr):
if addr == None:
addr = tools.get_random_uuid()
dev = Device("powerrelay.basic", addr)
dev.product_id = 'Dummy Power Relay'
dev.url = 'http://www.acme.org'
# attributes
power = dev.new_attribute('power')
dev.dump()
# methods
def on():
power.value = True
print("%s ON" % dev)
def off():
power.value = False
print("%s OFF" % dev)
dev.add_method('on', on)
dev.add_method('off', off)
eng = Engine()
eng.add_device(dev)
eng.run()
def setup_xaal():
""" setup xAAL Engine & Device. And start it in a Greenlet"""
global monitor
engine = Engine()
cfg = tools.load_cfg_or_die(PACKAGE_NAME)
dev = Device("hmi.basic")
dev.address = cfg['config']['addr']
dev.vendor_id = "IHSEV"
dev.product_id = "REST API"
dev.version = 0.1
dev.info = "%s@%s" % (PACKAGE_NAME, platform.node())
engine.add_device(dev)
monitor = Monitor(dev, filter_func=monitor_filter)
engine.start()
green_let = Greenlet(xaal_loop, engine)
green_let.start()
def run():
eng = Engine()
log = MQTTLogger(eng)
eng.run()
import time, random, sys
from xaal.lib import Engine, Device, tools
target = sys.argv[-1]
dev = Device("switch.basic", tools.get_random_uuid())
eng = Engine()
eng.start()
while 1:
eng.send_request(dev, [
target,
], 'dim', {'target': random.randint(0, 100)})
eng.loop()
time.sleep(5)
eng.send_request(dev, [
target,
], 'on')
print('ON')
eng.loop()
time.sleep(3)
eng.send_request(dev, [
target,
], 'off')
print('OFF')
eng.loop()
time.sleep(3)
def run():
eng = Engine()
log = WARP10Logger(eng)
eng.run()
def run():
eng = Engine()
gw = GW(eng)
eng.run()
class Controller:
def __init__(self):
self.addr = tools.get_random_uuid()
self.engine = Engine()
self.dev = Device("cli.experimental", self.addr)
self.dev.vendor_id = 'IHSEV'
self.dev.info = 'chute'
self.engine.add_device(self.dev)
self.threadlist = []
self.fallEvent = threading.Event()
self.pepper = Pepper(self)
self.kinect = Kinect()
self.sensfloor = Sensfloor(self.engine)
# thread to receive/send the xaal message
def engineLoop(self, event):
print "Sensfloor engine start->"
while (not event.is_set()): #not self.sensfloor.falldetected:
self.engine.loop()
if self.sensfloor.falldetected:
event.set()
print "[Sensfloor] fallEvent set by sensfloor"
def run(self):
# start falling detection with sensfloor
if True:
engineRun = threading.Thread(target=self.engineLoop,
args=(self.fallEvent, ),
name="sensfloor")
engineRun.start()
self.threadlist.append(engineRun)
# start falling detection with kinect
if True:
self.kinect.setEvent(self.fallEvent)
self.kinect.start()
self.threadlist.append(self.kinect)
# wait the two thread to be finished
for thread in self.threadlist:
thread.join()
if (self.sensfloor.cpos != [] and self.sensfloor.spos != []):
fallPosition = self.sensfloor.spos
print "[Sensfloor] x : %f, y : %f distance %f, direction %f" % (
self.sensfloor.cpos[0], self.sensfloor.cpos[1],
self.sensfloor.spos[0], self.sensfloor.spos[1])
elif (self.kinect.pos_c != []):
# mapping from the sensfloor position to robot cmd (distance, direction)
fallPosition = self.sensfloor.transformCartesianToPolar(
3.5, 7, self.kinect.pos_c[0], self.kinect.pos_c[1])
print "[Kinect] x : %f, y : %f" % (self.kinect.pos_c[0],
self.kinect.pos_c[1])
print "[Controller INFO] All fall detection finished"
# the robot reach to the position and communicate with the person
if self.fallEvent.is_set() and True:
self.pepper.postureInit()
self.pepper.say("I have detected that a person fell down")
self.pepper.moveToPerson(fallPosition)
# start searching the face of the person and dialogue face to face
self.headposition = self.pepper.searchFace(
15) # search face time_out 15s
if self.headposition == []:
print "No position"
else:
print "[Face Detection INFO] Average pitch %f, yaw %f" % (
self.headposition[0], self.headposition[1])
# verify the state of the of the person
if self.pepper.dialogue():
self.pepper.speakToPersonDetected("All right")
else:
self.pepper.speakToPersonDetected("Don't worry")
self.scenario()
self.pepper.postureInit()
self.pepper.returnToInitPosition(fallPosition)
def sendMail(self):
#link = self.webRTCaddress()
topic = "nao_robot/camera/top/camera/image_raw"
text = "The assistance robot and smart house has detected a fall. To check, please see the video from this address " #+ link
text = text + "/stream_viewer?topic=" + topic
mail = Mail(text)
mail.sendMail()
def webRTCaddress(self):
ni.ifaddresses('wlan0')
ip = ni.ifaddresses('wlan0')[2][0]['addr'] + ":8080"
print "HostIP : ", ip
return ip
def scenario(self):
self.smartDeviceAction("shutterleft", "up")
self.smartDeviceAction("shutterright", "up")
self.smartDeviceAction("lamp1", "on")
self.smartDeviceAction("lamp2", "on")
self.smartDeviceAction("lamp3", "on")
self.smartDeviceAction("lamp4", "on")
self.smartDeviceAction("lamp5", "on")
self.smartDeviceAction("lamp6", "on")
self.pepper.say("I turn the lights on")
print "lampes allumeees"
try:
self.sendMail()
self.pepper.say("I sent an email to your contact list")
except:
print "mail send failed"
self.engine.loop()
def smartDeviceAction(self, device, action):
addr = config.getConfigInfo(device,
"xaaladdr") #hdrware addr of the equpmt
print addr
self.engine.send_request(self.dev, [addr], action, None)
def run():
eng = Engine()
log = GW(eng)
eng.run()
def run():
eng = Engine()
log = InfluxDBLogger(eng)
eng.run()
def run():
eng = Engine()
ipx = GW.spawn(eng)
eng.run()
def run():
eng = Engine()
net = GW.spawn(eng)
eng.run()
def main(addr):
if addr == None:
addr = tools.get_random_uuid()
dev = Device("controlerMedia.basic", addr)
dev.product_id = 'Controler DLNA'
dev.url = 'http://www.acme.org'
# attributes
destination_media = dev.new_attribute('destination_media')
source_media = dev.new_attribute('source_media')
state_media = dev.new_attribute('state_media')
position_media = dev.new_attribute('position_media')
dev.dump()
# methods
def get_attributes():
print("Attributs")
########### Ensemble des methodes liees a la mise en place du media ##########
def set_destination(_dest):
# Met la valeur du media player a utiliser dans la variable "destination_media"
destination_media.value = _dest
print("Destination \"" + _dest + "\" is set")
def get_destinations():
# Interroge le dBus pour connaitre les media renderer en DLNA
# Envoie à l'utilisateur les destinations sous forme de liste
available_dest = {"renderer1": "salon", "renderer2": "cuisine"}
print("Display destinations")
return available_dest
def set_source(_src):
# Met la valeur du media server a utiliser dans la variable "source_media"
source_media.value = _src
print("Source \"" + _src + "\" is set")
def get_sources():
# Interroge le dBus pour connaitre les media server en DLNA
# Envoie à l'utilisateur les medias sous forme de liste
available_media = {"media1": "NAS\\video1", "media2": "NAS\\video2"}
print("Display sources")
return available_media
########## Ensemble des methodes liees a l'etat du media lorsqu'il est en cours de lecture #########
def play():
state_media.value = True
# Commande DLNA pour lancer le media
print("%s Play" % dev)
def pause():
state_media.value = False
# Commande DLNA pour mettre le media sur pause
print("%s Pause" % dev)
def stop():
print("Media is stop")
def next():
print("Next media is play")
def prev():
print("Previous media is play")
def moving_forward():
print("Media is forwarding of 10 secondes")
def moving_back():
print("Media is backing of 10 secondes")
dev.add_method('get_attributes', get_attributes)
dev.add_method('set_destination', set_destination)
dev.add_method('get_destinations', get_destinations)
dev.add_method('set_source', set_source)
dev.add_method('get_sources', get_sources)
dev.add_method('play', play)
dev.add_method('pause', pause)
dev.add_method('stop', stop)
dev.add_method('next', next)
dev.add_method('prev', prev)
dev.add_method('moving_forward', moving_forward)
dev.add_method('moving_back', moving_back)
eng = Engine()
eng.add_device(dev)
eng.run()
def run():
eng = Engine()
mdb = MetaDB(eng)
eng.run()
print("Welcome,\n")
print("Please choose the action (n°):")
print("1. play")
print("2. pause")
print("3. destination")
print("4. source")
print("\n0. Quit")
choice = input(" >> ")
exec_menu(choice)
# Main definition
addr = "f2fc6dac-4ffb-11ea-a473-0800276d39fa"
dev = Device("basic.basic", addr)
eng = Engine()
eng.add_device(dev)
addrMedia = ""
compteur_attente_dest = 0
compteur_attente_src = 0
# Menu definition
menu_actions = {
'main_menu': main,
'1': play,
'2': pause,
'3': set_destination,
'4': set_source,
'9': back,
'0': exit,
}
