class Main_Loop_Controller:
def __init__(self,top_document,accl):
#--- top_document is a parent document for all controllers
self.top_document = top_document
self.main_panel = JPanel(BorderLayout())
#----etched border
etched_border = BorderFactory.createEtchedBorder()
#----main loop timer
self.main_loop_timer = Main_Loop_Timer(self)
#---- set up accSeq
self.accSeq = null
seq_names = ["MEBT","DTL1","DTL2","DTL3","DTL4","DTL5","DTL6","CCL1","CCL2","CCL3","CCL4"]
lst = ArrayList()
for seqName in seq_names:
lst.add(accl.getSequence(seqName))
self.accSeq = AcceleratorSeqCombo("SEQUENCE", lst)
rf_gaps = self.accSeq.getAllNodesWithQualifier(AndTypeQualifier().and((OrTypeQualifier()).or(RfGap.s_strType)))
self.cav_wrappers = []
cavs = []
count = 0
for rf_gap in rf_gaps:
cav = rf_gap.getParent()
pos = self.accSeq.getPosition(cav)
if(cav not in cavs):
#print "debug cav=",cav.getId()," count=",count
cavs.append(cav)
alias = "null"
if(count > 3):
alias = seq_names[count+1-4]
else:
alias = seq_names[0]+str(count+1)
cav_llrf_name = "null"
cav_pwr_pv_name = "nullPwr"
if(count <= 3):
cav_llrf_name = "MEBT_LLRF:FCM"+str(count+1)
cav_pwr_pv_name = "MEBT_LLRF:Cav"+str(count+1)+":NetPwr"
if(count > 3 and count < 10):
cav_llrf_name = "DTL_LLRF:FCM"+str(count-3)
cav_pwr_pv_name = "DTL_LLRF:Cav"+str(count-3)+":NetPwr"
if(count > 9):
cav_llrf_name = "CCL_LLRF:FCM"+str(count-9)
cav_pwr_pv_name = "CCL_LLRF:Cav"+str(count-9)+":NetPwr"
amp_pv_name = cav_llrf_name+":CtlAmpSet"
phase_pv_name = cav_llrf_name+":CtlPhaseSet"
self.cav_wrappers.append(Cavity_Wrapper(cav,pos,alias,amp_pv_name,phase_pv_name,cav_pwr_pv_name))
#print "debug =================================="
#print "debug cav=",cav.getId()," alias=",alias," amp_pv_name=",amp_pv_name," phase_pv_name=",phase_pv_name
#print "debug cav_pwr_pv_name=",cav_pwr_pv_name
#print "debug cav=",cav.getId()," pos =",pos," L=",cav.getLength()
count += 1
#---- BPMs
self.bpm_wrappers = []
bpms = self.accSeq.getAllNodesWithQualifier(AndTypeQualifier().and((OrTypeQualifier()).or(BPM.s_strType)))
for bpm in bpms:
pos = self.accSeq.getPosition(bpm)
pos += 0.5*bpm.getBPMBucket().getLength()*bpm.getBPMBucket().getOrientation()
bpm_wrapper = BPM_Wrapper(bpm,pos)
#print "debug bpm=",bpm_wrapper.alias," pos =",pos
self.bpm_wrappers.append(bpm_wrapper)
#---- SCL first BPMs and Cavs
lst = ArrayList()
for seqName in ["SCLMed",]:
lst.add(accl.getSequence(seqName))
self.scl_accSeq = AcceleratorSeqCombo("SCL_SEQUENCE", lst)
bpms = self.scl_accSeq.getAllNodesWithQualifier((AndTypeQualifier().and((OrTypeQualifier()).or(BPM.s_strType))).andStatus(true))
bpms = bpms[:5]
self.scl_bpm_wrappers = []
for bpm in bpms:
pos = self.scl_accSeq.getPosition(bpm) + self.accSeq.getLength()
pos += 0.5*bpm.getBPMBucket().getLength()*bpm.getBPMBucket().getOrientation()
bpm_wrapper = BPM_Wrapper(bpm,pos)
#print "debug bpm=",bpm_wrapper.alias," pos =",pos
self.scl_bpm_wrappers.append(bpm_wrapper)
rf_gaps = self.scl_accSeq.getAllNodesWithQualifier(AndTypeQualifier().and((OrTypeQualifier()).or(RfGap.s_strType)))
cavs = []
for rf_gap in rf_gaps:
cav = rf_gap.getParent()
if((cav not in cavs) and cav.getStatus()):
cavs.append(cav)
cavs = cavs[:9]
self.scl_cav_wrappers = []
for cav in cavs:
pos = self.scl_accSeq.getPosition(cav) + self.accSeq.getLength()
alias = cav.getId().split(":")[1]
amp_pv_name = "SCL_LLRF:"+alias.replace("Cav","FCM")+":CtlAmpSet"
phase_pv_name = "SCL_LLRF:"+alias.replace("Cav","FCM")+":CtlPhaseSet"
cav_pwr_pv_name = "SCL_LLRF:"+alias+":NetPwr"
self.scl_cav_wrappers.append(Cavity_Wrapper(cav,pos,alias,amp_pv_name,phase_pv_name,cav_pwr_pv_name))
#print "debug =================================="
#print "debug cav=",cav.getId()," alias=",alias," amp_pv_name=",amp_pv_name," phase_pv_name=",phase_pv_name
#print "debug cav_pwr_pv_name=",cav_pwr_pv_name
#---- Panels setup
#---- Auxiliaries setup
self.loop_run_state = Loop_Run_State()
self.loop_run_state.isRunning = false
self.loop_run_state.shouldStop = false
#---------------------------------------------
#----etched border
etched_border = BorderFactory.createEtchedBorder()
#---- Cavities' Controllers
self.cav_controllers = []
self.cav_controllers.append(MEBT_Cavity_Controller(self,self.cav_wrappers[0]))
self.cav_controllers.append(MEBT_Cavity_Controller(self,self.cav_wrappers[1]))
self.cav_controllers.append(MEBT_Cavity_Controller(self,self.cav_wrappers[2]))
self.cav_controllers.append(MEBT_Cavity_Controller(self,self.cav_wrappers[3]))
#---------------------------------
self.cav_controllers.append(DTL1_Cavity_Controller(self,self.cav_wrappers[4]))
self.cav_controllers.append(DTL_CCL_Cavity_Controller(self,self.cav_wrappers[5]))
self.cav_controllers.append(DTL_CCL_Cavity_Controller(self,self.cav_wrappers[6]))
self.cav_controllers.append(DTL_CCL_Cavity_Controller(self,self.cav_wrappers[7]))
self.cav_controllers.append(DTL_CCL_Cavity_Controller(self,self.cav_wrappers[8]))
self.cav_controllers.append(DTL_CCL_Cavity_Controller(self,self.cav_wrappers[9]))
#----------------------------------
self.cav_controllers.append(DTL_CCL_Cavity_Controller(self,self.cav_wrappers[10]))
self.cav_controllers.append(DTL_CCL_Cavity_Controller(self,self.cav_wrappers[11]))
self.cav_controllers.append(DTL_CCL_Cavity_Controller(self,self.cav_wrappers[12]))
self.cav_controllers.append(DTL_CCL_Cavity_Controller(self,self.cav_wrappers[13]))
#------ cavity controllers customization --------------------
#------ MEBT Reb. 4 -------
self.cav_controllers[3].cav_amp_backward_steps_mult_text.setValue(8.0)
#----- amplitudes limits
self.cav_controllers[0].safe_relative_amp_down_text.setValue(50.)
self.cav_controllers[1].safe_relative_amp_down_text.setValue(50.)
self.cav_controllers[2].safe_relative_amp_down_text.setValue(50.)
self.cav_controllers[3].safe_relative_amp_down_text.setValue(50.)
#----- No PASTA Use for DTL2-6 and CCL4
self.cav_controllers[5].scan_main_panel.use_PASTA_RadioButton.setSelected(false)
self.cav_controllers[6].scan_main_panel.use_PASTA_RadioButton.setSelected(false)
self.cav_controllers[7].scan_main_panel.use_PASTA_RadioButton.setSelected(false)
self.cav_controllers[8].scan_main_panel.use_PASTA_RadioButton.setSelected(false)
self.cav_controllers[9].scan_main_panel.use_PASTA_RadioButton.setSelected(false)
self.cav_controllers[13].scan_main_panel.use_PASTA_RadioButton.setSelected(false)
#------ Phase corrections after Full scan for MEBT
self.cav_controllers[0].guess_phase_shift_text.setValue(-10.0)
self.cav_controllers[1].guess_phase_shift_text.setValue(-6.0)
#------ Phase and amplitude corrections after Full scan for inner BPM
self.cav_controllers[5].guess_phase_shift_text.setValue(-4.0)
self.cav_controllers[5].guess_cav_amp_shift_text.setValue(-2.0)
self.cav_controllers[6].guess_phase_shift_text.setValue(1.)
self.cav_controllers[6].guess_cav_amp_shift_text.setValue(0.7)
self.cav_controllers[8].guess_phase_shift_text.setValue(0.)
self.cav_controllers[8].guess_cav_amp_shift_text.setValue(-0.7)
self.cav_controllers[10].guess_phase_shift_text.setValue(0.)
self.cav_controllers[10].guess_cav_amp_shift_text.setValue(-3.6)
self.cav_controllers[11].guess_phase_shift_text.setValue(0.)
self.cav_controllers[11].guess_cav_amp_shift_text.setValue(-3.7)
#------ The BPMs for Full Scan and PASTA
self.cav_controllers[0].cav_bpms_controller.work_bpm_index = 1
self.cav_controllers[1].cav_bpms_controller.work_bpm_index = 1
self.cav_controllers[5].cav_bpms_controller.pasta_bpm_0_index = 2
self.cav_controllers[5].cav_bpms_controller.pasta_bpm_1_index = 5
self.cav_controllers[6].cav_bpms_controller.pasta_bpm_0_index = 2
self.cav_controllers[6].cav_bpms_controller.pasta_bpm_1_index = 4
self.cav_controllers[7].cav_bpms_controller.pasta_bpm_0_index = 2
self.cav_controllers[7].cav_bpms_controller.pasta_bpm_1_index = 5
self.cav_controllers[8].cav_bpms_controller.pasta_bpm_0_index = 5
self.cav_controllers[8].cav_bpms_controller.pasta_bpm_1_index = 6
self.cav_controllers[9].cav_bpms_controller.pasta_bpm_0_index = 3
self.cav_controllers[9].cav_bpms_controller.pasta_bpm_1_index = 5
self.cav_controllers[10].cav_bpms_controller.pasta_bpm_0_index = 5
self.cav_controllers[10].cav_bpms_controller.pasta_bpm_1_index = 6
self.cav_controllers[11].cav_bpms_controller.pasta_bpm_0_index = 2
self.cav_controllers[11].cav_bpms_controller.pasta_bpm_1_index = 3
self.cav_controllers[12].cav_bpms_controller.pasta_bpm_0_index = 2
self.cav_controllers[12].cav_bpms_controller.pasta_bpm_1_index = 4
self.cav_controllers[13].cav_bpms_controller.pasta_bpm_0_index = 3
self.cav_controllers[13].cav_bpms_controller.pasta_bpm_1_index = 4
self.cav_controllers[11].cav_bpms_controller.sin_wave_bpm_index = 0
self.cav_controllers[12].cav_bpms_controller.sin_wave_bpm_index = 0
self.cav_controllers[13].cav_bpms_controller.sin_wave_bpm_index = 1
#-----Target power levels
self.cav_controllers[4].cav_wrapper.net_pwr_goal = 378.0
self.cav_controllers[5].cav_wrapper.net_pwr_goal = 1208.0
self.cav_controllers[6].cav_wrapper.net_pwr_goal = 1294.0
self.cav_controllers[7].cav_wrapper.net_pwr_goal = 1416.0
self.cav_controllers[8].cav_wrapper.net_pwr_goal = 1454.0
self.cav_controllers[9].cav_wrapper.net_pwr_goal = 1414.0
self.cav_controllers[10].cav_wrapper.net_pwr_goal = 2531.0
self.cav_controllers[11].cav_wrapper.net_pwr_goal = 2984.0
self.cav_controllers[12].cav_wrapper.net_pwr_goal = 3018.0
self.cav_controllers[13].cav_wrapper.net_pwr_goal = 2856.0
#----------------------------------------------
left_panel = JPanel(BorderLayout())
self.tabbedPane = JTabbedPane()
self.tabbedPane.add("Cavity",JPanel(BorderLayout()))
self.tabbedPane.add("Parameters",JPanel(BorderLayout()))
#--------------------------------------------------------
self.cav_table = JTable(Cavities_Table_Model(self))
self.cav_table.setSelectionMode(ListSelectionModel.SINGLE_INTERVAL_SELECTION)
self.cav_table.setFillsViewportHeight(true)
self.cav_table.setPreferredScrollableViewportSize(Dimension(500,240))
self.cav_table.getSelectionModel().addListSelectionListener(Cavs_Table_Selection_Listener(self))
scrl_cav_panel = JScrollPane(self.cav_table)
scrl_cav_panel.setBorder(BorderFactory.createTitledBorder(etched_border,"Cavities' Parameters"))
init_buttons_panel = Init_Cav_Controllers_Panel(self)
start_stop_panel = Start_Stop_Panel(self)
#---- fake scan button
self.keepAllCavParams_RadioButton = start_stop_panel.keepAllCavParams_RadioButton
self.keepAmps_RadioButton = start_stop_panel.keepAmps_RadioButton
#---- status text field
self.status_text = start_stop_panel.status_text
tmp0_panel = JPanel(BorderLayout())
tmp0_panel.add(init_buttons_panel,BorderLayout.NORTH)
tmp0_panel.add(scrl_cav_panel,BorderLayout.CENTER)
tmp0_panel.add(start_stop_panel,BorderLayout.SOUTH)
tmp1_panel = JPanel(BorderLayout())
tmp1_panel.add(tmp0_panel,BorderLayout.NORTH)
left_panel.add(tmp1_panel,BorderLayout.WEST)
#--------------------------------------------------------
self.main_panel.add(left_panel,BorderLayout.WEST)
self.main_panel.add(self.tabbedPane,BorderLayout.CENTER)
#---- non GUI controllers
self.particle_tracker_model = Particle_Tracker_Model(self)
self.env_tracker_model = Envelop_Tracker_Model(self)
def getMainPanel(self):
return self.main_panel
def getMessageTextField(self):
return self.top_document.getMessageTextField()
def writeDataToXML(self,root_da):
main_loop_cntrl_da = root_da.createChild("MAIN_CONTROLLER")
main_loop_cntrl_da.setValue("keep_cav_params",self.keepAllCavParams_RadioButton.isSelected())
main_loop_cntrl_da.setValue("keep_cav_amp",self.keepAmps_RadioButton.isSelected())
#---------------------------------------------------------------------------------
bpm_wrappers_da = main_loop_cntrl_da.createChild("BPM_WRAPPERS")
for bpm_wrapper in self.bpm_wrappers:
bpm_wrapper.writeDataToXML(bpm_wrappers_da)
for bpm_wrapper in self.scl_bpm_wrappers:
bpm_wrapper.writeDataToXML(bpm_wrappers_da)
#---------------------------------------------------------------------------------
for cav_controller in self.cav_controllers:
cav_controller.writeDataToXML(main_loop_cntrl_da)
def readDataFromXML(self,root_da):
main_loop_cntrl_da = root_da.childAdaptor("MAIN_CONTROLLER")
if(main_loop_cntrl_da.intValue("keep_cav_params") == 1):
self.keepAllCavParams_RadioButton.setSelected(true)
else:
self.keepAllCavParams_RadioButton.setSelected(false)
if(main_loop_cntrl_da.intValue("keep_cav_amp") == 1):
self.keepAmps_RadioButton.setSelected(true)
else:
self.keepAmps_RadioButton.setSelected(false)
#-----------------------------------------------------
bpm_wrappers_da = main_loop_cntrl_da.childAdaptor("BPM_WRAPPERS")
if(bpm_wrappers_da != null):
for bpm_wrapper in self.bpm_wrappers:
bpm_wrapper.readDataFromXML(bpm_wrappers_da)
for bpm_wrapper in self.scl_bpm_wrappers:
bpm_wrapper.readDataFromXML(bpm_wrappers_da)
#-----------------------------------------------------
for cav_controller in self.cav_controllers:
cav_cntrl_data_da = main_loop_cntrl_da.childAdaptor("CAVITY_CONTROLLER_"+cav_controller.cav_wrapper.alias)
cav_controller.readDataFromXML(cav_cntrl_data_da)
def connectAllPVs(self):
for cav_wrapper in self.cav_wrappers:
try:
cav_wrapper.connectPVs()
except:
self.getMessageTextField().setText("Cannot connect PVs for cavity="+cav_wrapper.alias)
return false
return true
def initAllCavControllers(self, ind_start = -1, ind_stop = -1):
res = self.connectAllPVs()
if(not res):
return false
if(ind_start < 0):
ind_start = 0
ind_stop = len(self.cav_controllers) - 1
for cav_controller in self.cav_controllers[ind_start:ind_stop+1]:
try:
cav_controller.init()
except:
self.getMessageTextField().setText("Cannot read cavities' PVs! Cavity="+cav_controller.cav_wrapper.alias)
return false
return true
def setBPM_Off(self,bpm_wrapper):
"""
Set BPM as bad and unused in measurements.
Returns true if it is successful, false otherwise.
"""
self.getMessageTextField().setText("")
txt = ""
for cav_controller in self.cav_controllers:
if(cav_controller.checkBPM_Usage(bpm_wrapper)):
txt += " "+cav_controller.cav_wrapper.alias
if(txt != ""):
self.getMessageTextField().setText("Cannot remove "+bpm_wrapper.alias+" It is used in cavs: "+txt)
return false
return true
class MEBT_Main_Orbit_Diff_Controller:
def __init__(self,top_document,accl):
#--- top_document is a parent document for all controllers
self.top_document = top_document
self.main_panel = JPanel(BorderLayout())
#----etched border
etched_border = BorderFactory.createEtchedBorder()
#---- set up accSeq
self.accSeq = null
seq_names = ["MEBT","DTL1","DTL2","DTL3","DTL4","DTL5","DTL6"]
lst = ArrayList()
for seqName in seq_names:
lst.add(accl.getSequence(seqName))
self.accSeq = AcceleratorSeqCombo("SEQUENCE", lst)
#---- setup magnets
nodes = self.accSeq.getAllNodes()
self.quad_wrappers = []
self.perm_quads_wrappers = []
self.dc_wrappers = []
for node in nodes:
pos = self.accSeq.getPosition(node)
if(node.isMagnet()):
if(node.isPermanent()):
self.perm_quads_wrappers.append(Magnet_Wrapper(node,pos))
else:
if(node.isCorrector()):
self.dc_wrappers.append(Magnet_Wrapper(node,pos))
else:
self.quad_wrappers.append(Magnet_Wrapper(node,pos))
#---- cavs
rf_gaps = self.accSeq.getAllNodesWithQualifier(AndTypeQualifier().and((OrTypeQualifier()).or(RfGap.s_strType)))
self.cav_wrappers = []
self.mebt_cav_wrappers = []
cavs = []
for rf_gap in rf_gaps:
cav = rf_gap.getParent()
pos = self.accSeq.getPosition(cav)
if((cav not in cavs) and cav.getId().find("DTL") >= 0):
cavs.append(cav)
self.cav_wrappers.append(Cavity_Wrapper(cav,pos))
if((cav not in cavs) and cav.getId().find("MEBT") >= 0):
cavs.append(cav)
self.mebt_cav_wrappers.append(Cavity_Wrapper(cav,pos))
#---- BPMs
self.bpm_wrappers = []
bpms = self.accSeq.getAllNodesWithQualifier(AndTypeQualifier().and((OrTypeQualifier()).or(BPM.s_strType)))
for bpm in bpms:
pos = self.accSeq.getPosition(bpm)
bpm_wrapper = BPM_Wrapper(bpm,pos)
if(bpm_wrapper.bpm.getId().find("DTL") >= 0):
bpm_wrapper.use = false
self.bpm_wrappers.append(bpm_wrapper)
#---- debug print
"""
for quad_wrapper in self.quad_wrappers:
print "debug quad=",quad_wrapper.magnet.getId()
for perm_quad_wrapper in self.perm_quads_wrappers:
print "debug perm quad=",perm_quad_wrapper.magnet.getId()
for dc_wrapper in self.dc_wrappers:
print "debug dc=",dc_wrapper.magnet.getId()
for cav_wrapper in self.cav_wrappers:
print "debug cav=",cav_wrapper.cav.getId()
for bpm_wrapper in self.bpm_wrappers:
print "debug bpm=",bpm_wrapper.bpm.getId()
"""
#---- Panels setup
self.magnet_and_bpm_panel = Magnet_and_BPM_Panel(self)
self.correction_coeffs_panel = Correction_Coeffs_Panel(self)
self.orbit_diff_graphs_panel = Orbit_Diff_Graphs_Panel(self)
self.orbit_measurer_cotroller_panel = Orbit_Measurer_Controller_Panel(self)
#---- Auxiliaries setup
self.orbit_measurer = Orbit_Measurer(self)
self.measure_running = false
#---------------------------------------------
tmp0_panel = JPanel(BorderLayout())
tmp0_panel.add(self.orbit_diff_graphs_panel,BorderLayout.CENTER)
tmp0_panel.add(self.orbit_measurer_cotroller_panel,BorderLayout.SOUTH)
tmp0_panel.add(self.correction_coeffs_panel,BorderLayout.NORTH)
self.main_panel.add(self.magnet_and_bpm_panel,BorderLayout.WEST)
self.main_panel.add(tmp0_panel,BorderLayout.CENTER)
def getMainPanel(self):
return self.main_panel
