def _get(self, key, typ, default):
if typ in ("float", "mm"):
return IniFile.get_float(self.name, key, default)
elif typ == "int":
return IniFile.get_int(self.name, key, default)
elif typ == "bool":
return IniFile.get_int(self.name, key, default)
else:
return IniFile.get_str(self.name, key, default)
def load(self):
"""Load from a configuration file"""
# Load lists
lists = []
for var in self.variables:
n, t, d, l = var[:4]
if t == "list":
lists.append(n)
if lists:
for p in lists:
self.listdb[p] = []
for i in range(1000):
key = "_{0}.{1}".format(p, i)
value = IniFile.get_str(self.name, key).strip()
if value:
self.listdb[p].append(value)
else:
break
# Check if there is a current
try:
self.current = int(OCV.config.get(self.name, "current"))
except:
self.current = None
# Load values
if self.current is not None:
self.num = self._get("n", "int", 0)
for i in range(self.num):
key = "name.{0}".format(i)
self.values[key] = IniFile.get_str(self.name, key)
for var in self.variables:
n, t, d, l = var[:4]
key = "{0}.{1}".format(n, i)
self.values[key] = self._get(key, t, d)
else:
for var in self.variables:
n, t, d, l = var[:4]
self.values[n] = self._get(n, t, d)
self.update()
def __init__(self, master, app):
CNCRibbon.PageLabelFrame.__init__(
self,
master,
"Serial",
_("Serial"), app)
self.autostart = Tk.BooleanVar()
col, row = 0, 0
b = Tk.Label(self, text=_("Port:"))
b.grid(row=row, column=col, sticky=Tk.E)
self.addWidget(b)
self.portCombo = tkExtra.Combobox(
self,
False,
background=tkExtra.GLOBAL_CONTROL_BACKGROUND,
width=16,
command=self.comportClean)
self.portCombo.grid(row=row, column=col+1, sticky=Tk.EW)
tkExtra.Balloon.set(
self.portCombo,
_("Select (or manual enter) port to connect"))
self.portCombo.set(IniFile.get_str("Connection","port"))
self.addWidget(self.portCombo)
self.comportRefresh()
row += 1
b = Tk.Label(self, text=_("Baud:"))
b.grid(row=row, column=col, sticky=Tk.E)
self.baudCombo = tkExtra.Combobox(
self,
True,
background=tkExtra.GLOBAL_CONTROL_BACKGROUND)
self.baudCombo.grid(row=row, column=col+1, sticky=Tk.EW)
tkExtra.Balloon.set(self.baudCombo, _("Select connection baud rate"))
self.baudCombo.fill(BAUDS)
self.baudCombo.set(IniFile.get_str("Connection","baud","115200"))
self.addWidget(self.baudCombo)
row += 1
b = Tk.Label(self, text=_("Controller:"))
b.grid(row=row, column=col, sticky=Tk.E)
self.ctrlCombo = tkExtra.Combobox(
self,
True,
background=tkExtra.GLOBAL_CONTROL_BACKGROUND,
command=self.ctrlChange)
self.ctrlCombo.grid(row=row, column=col+1, sticky=Tk.EW)
tkExtra.Balloon.set(self.ctrlCombo, _("Select controller board"))
self.ctrlCombo.fill(OCV.TK_MAIN.controllerList())
self.ctrlCombo.set(OCV.TK_MAIN.controller)
self.addWidget(self.ctrlCombo)
row += 1
b = Tk.Checkbutton(
self,
text=_("Connect on startup"),
variable=self.autostart)
b.grid(row=row, column=col, columnspan=2, sticky=Tk.W)
tkExtra.Balloon.set(
b,
_("Connect to serial on startup of the program"))
self.autostart.set(IniFile.get_bool("Connection","openserial"))
self.addWidget(b)
col += 2
self.comrefBtn = Ribbon.LabelButton(
self,
image=OCV.icons["refresh"],
text=_("Refresh"),
compound=Tk.TOP,
command=lambda s=self: s.comportRefresh(True),
background=OCV.COLOR_BG)
self.comrefBtn.grid(
row=row,
column=col,
padx=0, pady=0,
sticky=Tk.NSEW)
tkExtra.Balloon.set(self.comrefBtn, _("Refresh list of serial ports"))
#col += 2
row = 0
self.connectBtn = Ribbon.LabelButton(
self,
image=OCV.icons["serial48"],
text=_("Open"),
compound=Tk.TOP,
command=lambda s=self: s.event_generate("<<Connect>>"),
background=OCV.COLOR_BG)
self.connectBtn.grid(
row=row,
column=col,
rowspan=3,
padx=0, pady=0,
sticky=Tk.NSEW)
tkExtra.Balloon.set(self.connectBtn, _("Open/Close serial port"))
self.grid_columnconfigure(1, weight=1)
def main_interface(self):
"""Generate main interface widgets
moved from __main__.py
"""
# --- Ribbon ---
OCV.RIBBON = Ribbon.TabRibbonFrame(self)
OCV.RIBBON.pack(side=Tk.TOP, fill=Tk.X)
# Main frame
self.paned = Tk.PanedWindow(self, orient=Tk.HORIZONTAL)
self.paned.pack(fill=Tk.BOTH, expand=Tk.YES)
# Status bar
frame = Tk.Frame(self)
frame.pack(side=Tk.BOTTOM, fill=Tk.X)
OCV.STATUSBAR = tkExtra.ProgressBar(frame, height=20, relief=Tk.SUNKEN)
OCV.STATUSBAR.pack(side=Tk.LEFT, fill=Tk.X, expand=Tk.YES)
OCV.STATUSBAR.configText(fill="DarkBlue", justify=Tk.LEFT, anchor=Tk.W)
self.statusz = Tk.Label(frame,
foreground="DarkRed",
relief=Tk.SUNKEN,
anchor=Tk.W,
width=10)
self.statusz.pack(side=Tk.RIGHT)
self.statusy = Tk.Label(frame,
foreground="DarkRed",
relief=Tk.SUNKEN,
anchor=Tk.W,
width=10)
self.statusy.pack(side=Tk.RIGHT)
self.statusx = Tk.Label(frame,
foreground="DarkRed",
relief=Tk.SUNKEN,
anchor=Tk.W,
width=10)
self.statusx.pack(side=Tk.RIGHT)
# Buffer bar
OCV.BUFFERBAR = tkExtra.ProgressBar(frame,
height=20,
width=40,
relief=Tk.SUNKEN)
OCV.BUFFERBAR.pack(side=Tk.RIGHT, expand=Tk.NO)
OCV.BUFFERBAR.setLimits(0, 100)
tkExtra.Balloon.set(OCV.BUFFERBAR, _("Controller buffer fill"))
# --- Left side ---
self.Lframe = Tk.Frame(self.paned)
self.paned.add(self.Lframe) #, minsize=340)
self.pageframe = Tk.Frame(self.Lframe)
self.pageframe.pack(side=Tk.TOP, expand=Tk.YES, fill=Tk.BOTH)
OCV.RIBBON.setPageFrame(self.pageframe)
# Command bar
cmd_f = Tk.Frame(self.Lframe)
cmd_f.pack(side=Tk.BOTTOM, fill=Tk.X)
self.cmdlabel = Tk.Label(cmd_f, text=_("Command:"))
self.cmdlabel.pack(side=Tk.LEFT)
OCV.CMD_W = Tk.Entry(cmd_f, relief=Tk.SUNKEN, background="White")
OCV.CMD_W.pack(side=Tk.RIGHT, fill=Tk.X, expand=Tk.YES)
tkExtra.Balloon.set(
OCV.CMD_W,
_("MDI Command line: Accept g-code commands or macro " \
"commands (RESET/HOME...) or editor commands " \
"(move,inkscape, round...) [Space or Ctrl-Space]"))
# --- Right side ---
self.Rframe = Tk.Frame(self.paned)
self.paned.add(self.Rframe)
# --- Canvas ---
OCV.CANVAS_F = CNCCanvas.CanvasFrame(self.Rframe, self)
OCV.CANVAS_F.pack(side=Tk.TOP, fill=Tk.BOTH, expand=Tk.YES)
self.linebuffer = Tk.Label(self.Rframe, background="khaki")
self.proc_line = Tk.StringVar()
self.linebuffer.configure(height=1,
anchor=Tk.W,
textvariable=self.proc_line)
self.linebuffer.pack(side=Tk.BOTTOM, fill=Tk.X)
# fist create Pages
self.pages = {}
for cls in (ControlPage, EditorPage, FilePage, ProbePage, TerminalPage,
ToolsPage):
page = cls(OCV.RIBBON, self)
self.pages[page.name] = page
# then add their properties (in separate loop)
errors = []
for name, page in self.pages.items():
for page_name in IniFile.get_str(OCV.PRG_NAME, "{0}.ribbon".format(
page.name)).split():
try:
page.addRibbonGroup(page_name)
except KeyError:
errors.append(page_name)
for page_name in IniFile.get_str(OCV.PRG_NAME,
"{0}.page".format(page.name)).split():
last = page_name[-1]
try:
if last == "*":
page.addPageFrame(page_name[:-1],
fill=Tk.BOTH,
expand=Tk.TRUE)
else:
page.addPageFrame(page_name)
except KeyError:
errors.append(page_name)
if errors:
tkMessageBox.showwarning(
"OKKCNC configuration",
"The following pages \"{0}\" are found in " \
"your <HOME>/.OKKCNC initialization file, " \
"which are either spelled wrongly or " \
"no longer exist in OKKCNC".format(" ".join(errors)), parent=self)
def load_sender_config(self):
self.controllerSet(IniFile.get_str("Connection", "controller"))
Pendant.port = IniFile.get_int("Connection", "pendantport",
Pendant.port)
GCode.LOOP_MERGE = IniFile.get_bool("File", "dxfloopmerge")
IniFile.loadHistory()
def loadConfig(self):
self.active.set(IniFile.get_str(OCV.PRG_NAME, "tool", "CNC"))
for tool in self.tools.values():
tool.load()