def main():
try:
# Set Global Watchdog timeout in Seconds
MOD.watchdogEnable(300)
#######################################
## Initialization
#######################################
rtnList = [-1,-1] #[return status,return data]
# return status:
# -1: Exception occurred
# 0: No errors occurred, no return data
# 1: No errors occurred, return data
# 2: Error occurred
#Initialize the serial interface @ 115200, we must do this or nothing comes out the serial port
rtnList = mySER.init("115200",'8N1')
if (rtnList[0] == -1):
return
mySER.sendUART("Beginning the serial bridge program. \r\n\r\n")
# Set Global Watchdog timeout in Seconds
#MOD.watchdogEnable(300)
#Get configuration from demo.conf file, transpose into new local myApp class
myApp = conf.conf('/sys','demo.conf')
if myApp.CONF_STATUS != 0:
mySER.sendUART("Demo configuration error: " + str(myApp.CONF_STATUS))
return rtnList
mySER.sendUART("Configuration Loaded.\r\n")
rtnList = myIO.init()
if (rtnList[0] == -1) or (rtnList[0] == -2) or rtnList[1] == "ERROR": raise UserWarning
mySER.sendUART("\r\nInitializing Network Setup. \r\n")
#Set Network specific settings, wait for SIM card to be ready
rtnList = NETWORK.initNetwork(myApp.ENS)
if (rtnList[0] == -1) or (rtnList[0] == -2): raise UserWarning
#Initialize SOCKET communications
rtnList = SOCKET.init('1',myApp.APN)
if (rtnList[0] == -1) or (rtnList[0] == -2): raise UserWarning
mySER.sendUART("Network Setup Initialized. \r\n\r\n")
#Update Unit information
rtnList = ATC.getUnitInfo()
if (rtnList[0] == -1): raise UserWarning
# Loop forever, without this loop the script would run once and exit script mode. On reboot or power-on the script would run once more
while (1):
MOD.watchdogReset()
#######################################
## Registration
#######################################
RegCheck = 0 #Initialize check
DataCheck = 0 #Initialize Check
#What is the signal strength?
rtnList = ATC.sendAtCmd('AT+CSQ',ATC.properties.CMD_TERMINATOR,5)
if (rtnList[0] == -1) or (rtnList[0] == -2): raise UserWarning
mySER.sendUART("Signal Strength (AT+CSQ): " + rtnList[1] + "\r\n")
#Wait until module is registered to GSM Network
mySER.sendUART("Checking Modem Registration. \r\n")
rtnList = NETWORK.isRegistered(180) #Wait 180 seconds for module to obtain GSM registration
if (rtnList[0] == -1) or (rtnList[0] == -2): raise UserWarning
if (rtnList[0] == 0): #Registered successfully
RegCheck = 1
mySER.sendUART("Modem Registered. \r\n\r\n")
#Wait until module is ready for data
mySER.sendUART("Checking Data Availability. \r\n")
rtnList = NETWORK.isDataAttached(myApp.CGMM, 180) #Wait 180 seconds for module to obtain GSM registration
if (rtnList[0] == -1) or (rtnList[0] == -2): raise UserWarning
if (rtnList[0] == 0): #Registered successfully
DataCheck = 1
mySER.sendUART("Modem ready for data. \r\n\r\n")
#check for exit prompt, let's use command EXITSCR
rtnList = mySER.readUART()
if (rtnList[1].find('EXITSCR') != -1):
print '\r\nExit Command Found\r\n'
return
#######################################
## Socket Connection
#######################################
# Loop while we're registered/ready
while (RegCheck == 1 and DataCheck == 1):
#check for exit prompt, let's use command EXITSCR
rtnList = mySER.readUART()
if (rtnList[1].find('EXITSCR') != -1):
print '\r\nExit Command Found\r\n'
return
rtnList = NETWORK.isRegistered(10) #Fast reg check
if (rtnList[0] == -1) or (rtnList[0] == -2): #unavailable, drill down discretely and show the status
RegCheck = 0
rtnList = ATC.sendAtCmd('AT+CREG?',ATC.properties.CMD_TERMINATOR,5)
mySER.sendUART("Registration Unavailable, Status: " + rtnList[1] + "\r\n")
break #exit loop
rtnList = NETWORK.isDataAttached(myApp.CGMM, 10) #Fast data check
if (rtnList[0] == -1) or (rtnList[0] == -2): #unavailable, drill down discretely and show the status
DataCheck = 0
rtnList = ATC.sendAtCmd('AT+CGREG?',ATC.properties.CMD_TERMINATOR,5)
mySER.sendUART("Data Unavailable, Status: " + rtnList[1] + "\r\n")
break #exit loop
#Open socket in online mode
mySER.sendUART("Opening socket to server: " + myApp.IP + ":" + myApp.PORT + "\r\n")
rtnList = SOCKET.openSocket(myApp.IP,myApp.PORT,1,myApp.USERNAME,myApp.PASSWORD,myApp.PROTOCOL,0)
if (rtnList[0] == -1) or (rtnList[0] == -2): raise UserWarning
#Check for open connection, this catches both online and command mode operations
if (rtnList[1] == "OK" or rtnList[1] == "CONNECT"):
mySER.sendUART("Socket opened successfully.\r\n")
else:
mySER.sendUART("Connection failed to open, trying again. \r\n")
#Check for open socket
DCD = MDM.getDCD()
if (DCD == 1):
#Set DCD on USIF0
SER.setDCD(1)
#Forward CONNECT Message to Serial Port
mySER.sendUART('\r\nConnected to Server\r\n')
myIO.USER_LED('ON')
#######################################
## Data exchange loop
#######################################
##Loop while Socket connected. This loop operates on the notion that we are in online mode, so we are not using send_CM
while(1):
#Pet the watchdog
MOD.watchdogReset()
#Check for DCD active on MDM
DCD = MDM.getDCD()
if (DCD == 1):
#Outbound
#Get data from serial port, use function return
rtnList = mySER.readUART()
if (len(rtnList[1])!=0):
#Forward data to open socket if it's not empty and not the exit script command
#check for exit prompt, let's use command EXITSCR
if (rtnList[1].find('EXITSCR') != -1): #exit found
print '\r\nExit Command Found\r\n'
print 'Exiting data mode\r\n'
rtnList = SOCKET.exitDataMode()
print 'Closing the socket\r\n'
rtnList = SOCKET.closeSocket(1)
return
print rtnList[1] #Debug
res = MDM.send(rtnList[1],1)
#Inbound
#Get data from open socket connection, straight MDM read
res = MDM.read()
if (len(res)!=0):
#Forward socket data to serial port
print res #Debug
mySER.sendUART(res)
#When socket is closed exit loop via this path
#Will guarantee that '\r\nNO CARRIER\r\n' is sent every time
if (DCD == 0):
#Clear DCD on USIF0
SER.setDCD(0)
myIO.USER_LED('OFF')
#Get any remaining data from closed socket connection, straight MDM read
res = MDM.read()
if (len(res)!=0):
#Forward socket data to serial port
mySER.sendUART(res)
break #exit loop to registration checks
except UserWarning:
print 'Controlled Script exit'
except:
print sys.exc_info()
rtnList[0] = -1
return
def main():
try:
rtnList = [-1, -1] # [return status,return data]
# return status:
# -1: Exception occurred
# 0: No errors occurred, no return data
# 1: No errors occurred, return data
# 2: Error occurred
# Initialize the serial interface @ 115200, we must do this or nothing comes out the serial port
rtnList = mySER.init("115200", "8N1")
if rtnList[0] == -1:
return
mySER.sendUART("Beginning the T2 SMS Query Program. \r\n\r\n")
# Set Global Watchdog timeout in Seconds
# MOD.watchdogEnable(300)
# Get configuration from demoT2.conf file, transpose into new local myApp class
myApp = conf.conf("/sys", "demoT2.conf")
if myApp.CONF_STATUS != 0:
mySER.sendUART("DemoT2 configuration error: " + str(myApp.CONF_STATUS))
return rtnList
mySER.sendUART("Configuration Loaded.\r\n")
rtnList = myIO.init()
if (rtnList[0] == -1) or (rtnList[0] == -2) or rtnList[1] == "ERROR":
raise UserWarning
mySER.sendUART("\r\nInitializing Network Setup. \r\n")
# Set Network specific settings, wait for SIM card to be ready
rtnList = NETWORK.initNetwork(myApp.ENS)
if (rtnList[0] == -1) or (rtnList[0] == -2) or rtnList[1] == "ERROR":
raise UserWarning
# Initialize SOCKET communications
rtnList = SOCKET.init("1", myApp.APN)
if (rtnList[0] == -1) or (rtnList[0] == -2) or rtnList[1] == "ERROR":
raise UserWarning
mySER.sendUART("Network Setup Initialized. \r\n\r\n")
mySER.sendUART("Initializing GPS \r\n")
# Turn the GPS ON
rtnList[1] = GPS.getPowerOnOff()
while rtnList[1] != 1:
GPS.powerOnOff(1)
rtnList[1] = GPS.getPowerOnOff()
mySER.sendUART("GPS Status: " + str(rtnList[1]) + "\r\n")
mySER.sendUART("GPS Initialized. \r\n\r\n")
mySER.sendUART("Initializing SMS. \r\n")
# Setup SMS
rtnList = mySMS.configSMS()
if rtnList[0] == 0:
mySER.sendUART("SMS Initialized. \r\n\r\n")
else:
return
# Update Unit information
rtnList = ATC.getUnitInfo()
if (rtnList[0] == -1) or rtnList[1] == "ERROR":
raise UserWarning
# Loop forever, without this loop the script would run once and exit script mode. On reboot or power-on the script would run once more
while 1:
# MOD.watchdogReset()
RegCheck = 0 # Initialize check
mySER.sendUART("Checking Modem Registration. \r\n")
# Wait until module is registered to GSM Network
rtnList = NETWORK.isRegistered(180) # Wait 180 seconds for module to obtain GSM registration
if (rtnList[0] == -1) or (rtnList[0] == -2) or rtnList[1] == "ERROR":
raise UserWarning
if rtnList[0] == 0:
RegCheck = 1
mySER.sendUART("Modem Registered. Waiting for SMS. \r\n\r\n")
# Loop forever, without this loop the script would run once and exit script mode. On reboot or power-on the script would run once more
while RegCheck == 1:
# MOD.watchdogReset()
# Update NMEA Data
# The following are available through the included GPS module:
# GPS.getActualPosition(), returns all fields like AT$GPSACP would
# GPS.getLastGGA()
# GPS.getLastGLL()
# GPS.getLastGSA()
# GPS.getLastGSV()
# GPS.getLastRMC()
# GPS.getLastVTG()
# GPS.getPosition(), this gives LAT/LONG in numeric format
# For the purposes of this demo, RMC will be used
# The returned value gives a \r\n at the end so we must strip it for proper usage.
# sleep for 1 second to let the GPS catch up otherwise we eventually get a response that .rstrip errors on
time.sleep(1)
GPSPositionTemp = ""
GPSPositionTemp = GPS.getLastRMC()
GPSPositionTemp = GPSPositionTemp.rstrip()
rtnList = mySMS.CheckNewSMS()
# If a new SMS is found and is valid, pass it to the command logic
if rtnList[0] == 1:
# We have received a new SMS, let's find what it wants us to do.
mySER.sendUART("SMS Received.\r\n")
mySER.sendUART("SMS Data : " + str(rtnList[1]) + "\r\n")
rtnList = mySMS.SMSCommand(rtnList[1])
# 0: Pass, action carried out and SMS sent back
# -1: Exception
# -2: Pass, Unrecognized change command or AT command received though
# -3: Unrecognized SMS
# -4: Error sending an SMS to the originating P/N
if rtnList[0] == -1:
return
rtnList = NETWORK.isRegistered(10) # Check Registration on the fly
if (rtnList[0] == -1) or (rtnList[0] == -2):
RegCheck = 0
mySER.sendUART("\r\nRegistration not available, checking status.\r\n")
# What is the signal strength?
rtnList = ATC.sendAtCmd("AT+CSQ", ATC.properties.CMD_TERMINATOR, 0, 5)
mySER.sendUART("Signal Strength (AT+CSQ): " + rtnList[1] + "\r\n")
# Still registered?
rtnList = ATC.sendAtCmd("AT+CREG?", ATC.properties.CMD_TERMINATOR, 0, 5)
mySER.sendUART("Registration Check (AT+CREG?): " + rtnList[1] + "\r\n")
break
except UserWarning:
print "Controlled Script exit"
except:
print sys.exc_info()
rtnList[0] = -1
return