def startup_ping(ss, cmd):
if cmd is None:
trace("Ping Arduino")
ss.write(sserial.ping())
return
if sserial.is_ping(cmd) == True:
trace("Arduino reply: %s"%(cmd.str()))
return
trace("Arduino ignore %s"%(cmd.str()))
def startup_xtest(ss, cmd):
if cmd is None:
trace("X test Arduino")
ss.write(sserial.notSupported(ord('X')))
return
if sserial.is_not_supported(cmd) == True:
trace("Arduino reply: %s" % (cmd.str()))
return
trace("Arduino ignore %s" % (cmd.str()))
def startup_xtest(ss, cmd):
if cmd is None:
trace("X test Arduino")
ss.write(sserial.notSupported(ord('X')))
return
if sserial.is_not_supported(cmd) == True:
trace("Arduino reply: %s"%(cmd.str()))
return
trace("Arduino ignore %s"%(cmd.str()))
def startup_ping(ss, cmd):
if cmd is None:
trace("Ping Arduino")
ss.write(sserial.ping())
return
if sserial.is_ping(cmd) == True:
trace("Arduino reply: %s" % (cmd.str()))
return
trace("Arduino ignore %s" % (cmd.str()))
def detect(ss, cmd, temperature, humidity):
if cmd is None:
ss.write(sserial.queryTH())
return (0, 0)
if sserial.is_resp_th(cmd) == True:
t,h = cmd.arg1()
if t != temperature or h != humidity:
trace("Arduino Detect: (%d*C %d%%) => (%d*C %d%%)"%(temperature, humidity, t, h))
return (t, h)
trace("Arduino ignore %s"%(cmd.str()))
return (0, 0)
def detect(ss, cmd, temperature, humidity):
if cmd is None:
ss.write(sserial.queryTH())
return (0, 0)
if sserial.is_resp_th(cmd) == True:
t, h = cmd.arg1()
if t != temperature or h != humidity:
trace("Arduino Detect: (%d*C %d%%) => (%d*C %d%%)" %
(temperature, humidity, t, h))
return (t, h)
trace("Arduino ignore %s" % (cmd.str()))
return (0, 0)
def __init__(self):
super().__init__()
self.setupUi(self)
self.myserial = SimpleSerial()
self.save_thread = Save_receive_thread()
self.update_coms()
self.data_comboBox.setCurrentText("8")
self.receive_textBrowser.setStyleSheet("background-color: black;")
self.receive_textBrowser.setTextColor(QColor(0, 255, 0))
#connect signal and slot
self.open_pushButton.clicked.connect(self.open_serial)
self.send_pushButton.clicked.connect(self.serial_send_data)
self.receive_clear_pushButton.clicked.connect(self.clear_receive_area)
self.send_clear_pushButton.clicked.connect(self.clear_send_area)
self.com_comboBox.clicked.connect(self.update_coms)
def serve(ss, cmd, tt, te, tr, ht, he, hr, s, ot, oh):
# process the events from Arduino.
if cmd is not None:
if sserial.is_not_supported(cmd) == True:
trace("Ignore command %s"%(cmd.str()))
return (s, ot, oh)
elif sserial.is_unknown(cmd) == True:
trace("Ignore command %s"%(cmd.str()))
return (s, ot, oh)
elif sserial.is_heater_closed(cmd) == True:
trace("Arduino close the heater for warm enough.")
return ('detect', ot, oh)
if sserial.is_heater_opened(cmd) == True:
trace("Arduino open heater ok, %d*C %d%%, target is %d*C"%(ot, oh, tt))
return (s, ot, oh)
if sserial.is_fan_closed(cmd) == True:
trace("Arduino close the fan for humidity ok.")
return ('detect', ot, oh)
if sserial.is_fan_opened(cmd) == True:
trace("Arduino open fan ok, %d*C %d%%, target is %d%%"%(ot, oh, ht))
return (s, ot, oh)
# use state machine to drive new event.
if s == 'init':
startup_ping(ss, cmd)
return ('xtest', 0, 0)
if s == 'xtest':
startup_xtest(ss, cmd)
return ('detect', 0, 0)
if s == 'detect':
(t, h) = detect(ss, cmd, ot, oh)
if t == 0 and h == 0:
return ('detect', ot, oh)
if t < tt - tr:
return ('heat', t, h)
if h >= ht + hr:
return ('fan', t, h)
return ('detect', t, h)
if s == 'heat':
(t, h) = detect(ss, cmd, ot, oh)
if t == 0 and h == 0:
return ('heat', ot, oh)
if t < tt:
#trace("Notify Arduino to open heater.")
ss.write(sserial.openHeater(tt, te))
return ('heat', t, h)
trace("Warm enough, no need to heat, %d*C %d%%"%(t, h))
return ('detect', t, h)
if s == 'fan':
(t, h) = detect(ss, cmd, ot, oh)
if t == 0 and h == 0:
return ('fan', ot, oh)
if h >= ht:
#trace("Notify Arduino to open fan.")
ss.write(sserial.openFan(ht, he))
return ('fan', t, h)
trace("Humidity ok, no need to fan, %d*C %d%%"%(t, h))
return ('detect', t, h)
return ('init', 0, 0)
# start heater when <=(target-trigger)
# stop heater when overflow, texpire in seconds.
(tt, te, tr, ht, he, hr, s, t, h) = (
21, # tt, temperature target
30, # te, temperature expire
2, # tr, temperature trigger
75, # ht, humidity target
30, # he, humidity expire
15, # hr, humidity trigger
'init', # s, state
0, # t, temperature
0 # h, humifity
)
ss = sserial.open("/dev/ttyUSB0", 115200)
while True:
try:
cmd = None
if s != 'init' and ss.available(3) == True:
cmd = ss.read()
if cmd is not None:
if sserial.is_resp_th2(cmd):
t2, h2 = cmd.arg1()
report("space", { "temperature": t2, "humidity": h2})
continue
# input and output the states.
(s, t, h) = serve(ss, cmd, tt, te, tr, ht, he, hr, s, t, h)
def serve(ss, cmd, tt, te, tr, ht, he, hr, s, ot, oh):
# process the events from Arduino.
if cmd is not None:
if sserial.is_not_supported(cmd) == True:
trace("Ignore command %s" % (cmd.str()))
return (s, ot, oh)
elif sserial.is_unknown(cmd) == True:
trace("Ignore command %s" % (cmd.str()))
return (s, ot, oh)
elif sserial.is_heater_closed(cmd) == True:
trace("Arduino close the heater for warm enough.")
return ('detect', ot, oh)
if sserial.is_heater_opened(cmd) == True:
trace("Arduino open heater ok, %d*C %d%%, target is %d*C" %
(ot, oh, tt))
return (s, ot, oh)
if sserial.is_fan_closed(cmd) == True:
trace("Arduino close the fan for humidity ok.")
return ('detect', ot, oh)
if sserial.is_fan_opened(cmd) == True:
trace("Arduino open fan ok, %d*C %d%%, target is %d%%" %
(ot, oh, ht))
return (s, ot, oh)
# use state machine to drive new event.
if s == 'init':
startup_ping(ss, cmd)
return ('xtest', 0, 0)
if s == 'xtest':
startup_xtest(ss, cmd)
return ('detect', 0, 0)
if s == 'detect':
(t, h) = detect(ss, cmd, ot, oh)
if t == 0 and h == 0:
return ('detect', ot, oh)
if t < tt - tr:
return ('heat', t, h)
if h >= ht + hr:
return ('fan', t, h)
return ('detect', t, h)
if s == 'heat':
(t, h) = detect(ss, cmd, ot, oh)
if t == 0 and h == 0:
return ('heat', ot, oh)
if t < tt:
#trace("Notify Arduino to open heater.")
ss.write(sserial.openHeater(tt, te))
return ('heat', t, h)
trace("Warm enough, no need to heat, %d*C %d%%" % (t, h))
return ('detect', t, h)
if s == 'fan':
(t, h) = detect(ss, cmd, ot, oh)
if t == 0 and h == 0:
return ('fan', ot, oh)
if h >= ht:
#trace("Notify Arduino to open fan.")
ss.write(sserial.openFan(ht, he))
return ('fan', t, h)
trace("Humidity ok, no need to fan, %d*C %d%%" % (t, h))
return ('detect', t, h)
return ('init', 0, 0)
# start heater when <=(target-trigger)
# stop heater when overflow, texpire in seconds.
(tt, te, tr, ht, he, hr, s, t, h) = (
21, # tt, temperature target
30, # te, temperature expire
2, # tr, temperature trigger
75, # ht, humidity target
30, # he, humidity expire
15, # hr, humidity trigger
'init', # s, state
0, # t, temperature
0 # h, humifity
)
ss = sserial.open("/dev/ttyUSB0", 115200)
while True:
try:
cmd = None
if s != 'init' and ss.available(3) == True:
cmd = ss.read()
if cmd is not None:
if sserial.is_resp_th2(cmd):
t2, h2 = cmd.arg1()
report("space", {"temperature": t2, "humidity": h2})
continue
# input and output the states.
(s, t, h) = serve(ss, cmd, tt, te, tr, ht, he, hr, s, t, h)
class MyMainWindow(QMainWindow, Ui_MainWindow):
def __init__(self):
super().__init__()
self.setupUi(self)
self.myserial = SimpleSerial()
self.save_thread = Save_receive_thread()
self.update_coms()
self.data_comboBox.setCurrentText("8")
self.receive_textBrowser.setStyleSheet("background-color: black;")
self.receive_textBrowser.setTextColor(QColor(0, 255, 0))
#connect signal and slot
self.open_pushButton.clicked.connect(self.open_serial)
self.send_pushButton.clicked.connect(self.serial_send_data)
self.receive_clear_pushButton.clicked.connect(self.clear_receive_area)
self.send_clear_pushButton.clicked.connect(self.clear_send_area)
self.com_comboBox.clicked.connect(self.update_coms)
def mousePressEvent(self, event):
print("hhhhhhhhhh")
def update_coms(self):
self.coms = self.myserial.get_com_list()
self.com_comboBox.clear()
self.com_comboBox.addItems(self.coms)
print(self.coms)
def serial_send_data(self, data):
if self.myserial.IS_OPEN == True:
data_str = self.send_textEdit.toPlainText()
if self.send_hex_checkBox.isChecked():
data_str = data_str.replace(" ", "")
print(data_str)
try:
data_bytes = bytes.fromhex(data_str)
except:
QMessageBox.warning(self, "输入错误!",
"请正确输入16进制数据！\n数字范围：0~f\n数字个数：偶数个",
QMessageBox.Yes)
print("hex error!")
return
else:
try:
data_bytes = bytes(data_str, encoding="ascii")
except:
try:
data_bytes = bytes(data_str, encoding="gbk")
except:
print("send error!")
if self.send_new_line_checkBox.isChecked():
data_bytes += b"\r\n"
self.myserial.send(data_bytes)
def clear_receive_area(self):
self.receive_textBrowser.setText("")
self.receive_data_len = 0
self.label_10.setText(str(self.receive_data_len))
def clear_send_area(self):
self.send_textEdit.setText("")
def update_receive_area(self, data):
if (self.save_checkBox.isChecked()):
self.save_thread.get_new_data(data)
self.receive_data_len += len(data)
if self.receive_hex_radioButton.isChecked():
str_data = ""
for i in data:
str_data += str("%02x" % i) + " "
self.receive_textBrowser.append(str_data)
else:
try:
self.receive_textBrowser.append(str(data, encoding="ascii"))
except:
try:
self.receive_textBrowser.append(str(data, encoding="gbk"))
except:
str_data = ""
for i in data:
str_data += hex(i)[2:] + " "
self.receive_textBrowser.append(str_data)
self.label_10.setText(str(self.receive_data_len))
def update_com_paras(self):
self.port = self.com_comboBox.currentText()
self.baudrate = int(self.baudrate_comboBox.currentText())
self.parity = self.parity_comboBox.currentText()
if self.parity == "无校验":
self.parity = "N"
elif self.parity == "奇校验":
self.parity = "E"
elif self.parity == "偶校验":
self.parity = "O"
else:
print("parity error!: ", self.parity)
self.stopbits = float(self.stopbit_comboBox.currentText())
self.bytesize = int(self.data_comboBox.currentText())
self.com_paras_dic = {
"port": self.port,
"baudrate": self.baudrate,
"parity": self.parity,
"stopbits": self.stopbits,
"bytesize": self.bytesize
}
print(self.com_paras_dic)
def open_serial(self):
# print(self.open_pushButton.text())
print("open id: ", threading.current_thread().ident)
if self.open_pushButton.text() == "打开串口":
self.update_com_paras()
self.myserial.open(**self.com_paras_dic)
if self.myserial.IS_OPEN == True:
self.com_comboBox.setEnabled(False)
self.data_comboBox.setEnabled(False)
self.stopbit_comboBox.setEnabled(False)
self.parity_comboBox.setEnabled(False)
self.baudrate_comboBox.setEnabled(False)
self.receive_data_len = 0
self.serial_thread = Serial_receive_thread()
self.serial_thread.start_receive_data(self.myserial)
self.serial_thread.signal_have_data.connect(
self.update_receive_area)
self.serial_thread.signal_receive_error.connect(
self.close_serial)
self.open_pushButton.setText("关闭串口")
self.statusBar().showMessage("串口打开成功！", 5000)
else:
self.statusBar().showMessage("串口打开失败！", 5000)
else:
self.close_serial()
def close_serial(self):
self.myserial.close()
self.com_comboBox.setEnabled(True)
self.data_comboBox.setEnabled(True)
self.stopbit_comboBox.setEnabled(True)
self.parity_comboBox.setEnabled(True)
self.baudrate_comboBox.setEnabled(True)
self.statusBar().showMessage("串口关闭成功！", 5000)
self.open_pushButton.setText("打开串口")
