class Device_ABE_DeltaSigmaPiADC:
"""
https://github.com/abelectronicsuk/ABElectronics_Python_Libraries
"""
def __init__(self,
bus=None,
address=None,
address2=None,
samplerate=None,
gain=None):
from ABE_helpers import ABEHelpers
from ABE_ADCDifferentialPi import ADCDifferentialPi
if bus is None:
i2c_helper = ABEHelpers()
bus = i2c_helper.get_smbus()
# Initialize the ADC device using the default addresses and sample rate 18.
# Sample rate can be 12, 14, 16 or 18.
self.adc = ADCDifferentialPi(bus,
address=address,
address2=address2,
rate=samplerate)
# Set amplifier gain to 8.
if gain is not None:
self.adc.set_pga(gain)
def read(self, channel):
# Returns the voltage from the selected ADC channel - channels 1 to 8.
return self.adc.read_voltage(channel)
def hallSen():
# GPIO Setup
GPIO.setmode(GPIO.BOARD)
GPIO.setup(7, GPIO.OUT)
text_file = open("hallSensor_Data.txt", "w")
initTime = time.time()
t1 = 0
t2 = 0
flag = 0
diameter = 14 # need to find the actual diameter !!!
i2c_helper = ABEHelpers()
bus = i2c_helper.get_smbus()
adc = ADCDifferentialPi(bus, i2cAddr1, i2cAddr2, bitRate)
SevenSeg.initDisplay()
while (True):
voltage = adc.read_voltage(
channel
) # voltage output from hall sensor (either a pos. or neg. value)
curTime = time.time(
) - initTime # calculates the current time from time acc. minus time started with
if voltage < 0.0 and flag == 0: # if voltage is neg. and we have not passed by the magnet yet
flag = 1
t1 = t2 # stores the previous curent time from curTime
t2 = curTime # stores the current time in curTime
rps = 1 / (t2 - t1) # revolutions per second
mph = rps * (math.pi) * diameter * (
3600 / 63360) # conversion from rps to miles per second
#mph = rps*60
#print( str(curTime) + "," + str(voltage) + "," + str(mph) )
#text_file.write( str(curTime) + "," + str(voltage) + "," + str(mph) + "\n" )
elif voltage < 0.0 and flag == 1: # else if voltage is neg. but we are currently still passing by the magnet
#print( str(curTime) + "," + str(voltage) )
#text_file.write( str(curTime) + "," + str(voltage) + "\n" )
temp = 1
else: # else the voltage is positive (meaning the magnet is not next the the hall sensor)
flag = 0
#print( str(curTime) + "," + str(voltage) )
#text_file.write( str(curTime) + "," + str(voltage) + "\n" )
SevenSeg.displayNum(int(mph))
#time.sleep( 0.0100 )
text_file.close()
def run(self): global mph global flag t1 = 0 t2 = 0 flagMine = 0 diameter = 14 # need to find the actual diameter !!! i2c_helper = ABEHelpers() bus = i2c_helper.get_smbus() adc = ADCDifferentialPi(bus, i2cAddr1, i2cAddr2, bitRate) while True: c.acquire() if flag == 1: flag = 0 voltage = adc.read_voltage( channel ) # voltage output from hall sensor (either a pos. or neg. value) curTime = time.time() - initTime # calculates the current time from time acc. minus time started with if voltage < 0.0 and flagMine == 0: # if voltage is neg. and we have not passed by the magnet yet flagMine = 1 t1 = t2 # stores the previous curent time from curTime t2 = curTime # stores the current time in curTime rps = 1/(t2 - t1) # revolutions per second mph = rps * (math.pi) * diameter * (3600/63360) # conversion from rps to miles per second #mph = rps*60 #print( str(curTime) + "," + str(voltage) + "," + str(mph) ) #text_file.write( str(curTime) + "," + str(voltage) + "," + str(mph) + "\n" ) elif voltage < 0.0 and flagMine == 1: # else if voltage is neg. but we are currently still passing by the magnet #print( str(curTime) + "," + str(voltage) ) #text_file.write( str(curTime) + "," + str(voltage) + "\n" ) temp = 1 else: # else the voltage is positive (meaning the magnet is not next the the hall sensor) flagMine = 0 #print( str(curTime) + "," + str(voltage) ) #text_file.write( str(curTime) + "," + str(voltage) + "\n" ) #mph = mph + 1 c.notify_all() else: c.wait() c.release() text_file.close()
def StrainGauge():
text_file = open("strainGuage_Data.txt", "w")
i2c_helper = ABEHelpers()
bus = i2c_helper.get_smbus()
adc = ADCDifferentialPi(bus, i2cAddr1, i2cAddr2, bitRate)
adc.set_pga(
1) # Set the gain of the PDA on the chip (Parameters: gain - 1,2,4,8)
prev_voltage = 0
for i in range(10000):
voltage = adc.read_voltage(channel) # voltage output from strain Gauge
changeInVoltage = voltage - prev_voltage
prev_voltage = voltage
#print( str(changeInVoltage * 1000) )
text_file.write(str(voltage) + "\n")
def __init__(self,
bus=None,
address=None,
address2=None,
samplerate=None,
gain=None):
from ABE_helpers import ABEHelpers
from ABE_ADCDifferentialPi import ADCDifferentialPi
if bus is None:
i2c_helper = ABEHelpers()
bus = i2c_helper.get_smbus()
# Initialize the ADC device using the default addresses and sample rate 18.
# Sample rate can be 12, 14, 16 or 18.
self.adc = ADCDifferentialPi(bus,
address=address,
address2=address2,
rate=samplerate)
# Set amplifier gain to 8.
if gain is not None:
self.adc.set_pga(gain)
Version 1.0 Created 30/10/2015
Requires python smbus to be installed
run with: python demo-resistance-thermometer.py
================================================
Initialise the ADC device using the default addresses and 18 bit sample rate,
change this value if you have changed the address selection jumpers
Bit rate can be 12,14, 16 or 18
"""
i2c_helper = ABEHelpers()
bus = i2c_helper.get_smbus()
adc = ADCDifferentialPi(bus, 0x68, 0x69, 18)
# the resistor values for the Wheatstone bridge are:
resistor1 = 10000
resistor2 = 10000
resistor3 = 10000
# Input voltage
voltin = 3.3
# Resistance thermometer values from datasheet
bResistance = 3435
t25Resistance = 10000
# Constants
t0 = 273.15
t25 = t0 + 25
# read sensors from https://www.wirelessthings.net/wireless-temperature-sensor # using USB wireless dongle SRF Stick - USB Radio (868-915Mhz) # https://www.wirelessthings.net/srf-stick-868-915-mhz-easy-to-use-usb-radio # and display to screen, each sensor has an ID starting with: # TA, TB or TC import serial baud = 9600 port = '/dev/ttyAMA0' ser = serial.Serial(port, baud) ser.timeout = 2 # Setup ADC Chip i2c_helper = ABEHelpers() bus = i2c_helper.get_smbus() adc = ADCDifferentialPi(bus, 0x6a, 0x6a, 16) # Setup GPIO pin to read pump running status GPIO.setmode(GPIO.BCM) GPIO.setup(19, GPIO.IN, pull_up_down=GPIO.PUD_DOWN) # 1 wire temperature sensors path1 = "/mnt/1wire/28.5B7DC4030000/temperature" path2 = "/mnt/1wire/28.8C37C4030000/temperature" path3 = "/mnt/1wire/28.611555030000/temperature" path4 = "/mnt/1wire/28.8945C4030000/temperature" # setup variables with default values varCurrentMinute = 0 varPrevMinute = 0 varNow = datetime.datetime.now()
Version 1.0 Created 04/10/2015
Requires python 3 smbus to be installed
run with: python3 demo-adxl335.py
================================================
Initialise the ADC device using the default addresses and 12 bit sample rate,
change this value if you have changed the address selection jumpers
Bit rate can be 12,14, 16 or 18
"""
i2c_helper = ABEHelpers()
bus = i2c_helper.get_smbus()
adc = ADCDifferentialPi(bus, 0x68, 0x69, 12)
# the conversion factor is the ratio of the voltage divider on the inputs
conversionfactor = 1.666
# setup these static values when the sensor is not moving
xStatic = 0
yStatic = 0
zStatic = 0
xMax = 0
xMin = 0
yMax = 0
yMin = 0
zMax = 0
Requires python smbus to be installed
run with: python demo-logvoltage.py
================================================
Initialise the ADC device using the default addresses and sample rate, change
this value if you have changed the address selection jumpers
Sample rate can be 12,14, 16 or 18
"""
i2c_helper = ABEHelpers()
bus = i2c_helper.get_smbus()
adc = ADCDifferentialPi(bus, 0x68, 0x69, 18)
def writetofile(texttowrtite):
f = open('adclog.txt', 'a')
f.write(str(datetime.datetime.now()) + " " + texttowrtite)
f.closed
while (True):
# read from adc channels and write to the log file
writetofile("Channel 1: %02f\n" % adc.read_voltage(1))
writetofile("Channel 2: %02f\n" % adc.read_voltage(2))
writetofile("Channel 3: %02f\n" % adc.read_voltage(3))
writetofile("Channel 4: %02f\n" % adc.read_voltage(4))
writetofile("Channel 5: %02f\n" % adc.read_voltage(5))
ABElectronics Delta-Sigma Pi 8-Channel ADC demo
Version 1.0 Created 09/05/2014
Version 1.1 16/11/2014 updated code and functions to PEP8 format
Requires python smbus to be installed
run with: python demo-read_voltage.py
================================================
Initialise the ADC device using the default addresses and sample rate, change this value if you have changed the address selection jumpers
Sample rate can be 12,14, 16 or 18
"""
i2c_helper = ABEHelpers()
bus = i2c_helper.get_smbus()
adc = ADCDifferentialPi(bus, 0x68, 0x69, 18)
while (True):
# clear the console
os.system('clear')
# read from adc channels and print to screen
print("Channel 1: %02f" % adc.read_voltage(1))
print("Channel 2: %02f" % adc.read_voltage(2))
print("Channel 3: %02f" % adc.read_voltage(3))
print("Channel 4: %02f" % adc.read_voltage(4))
print("Channel 5: %02f" % adc.read_voltage(5))
print("Channel 6: %02f" % adc.read_voltage(6))
print("Channel 7: %02f" % adc.read_voltage(7))
print("Channel 8: %02f" % adc.read_voltage(8))
ABElectronics Delta-Sigma Pi 8-Channel ADC demo
Version 1.0 Created 09/05/2014
Version 1.1 16/11/2014 updated code and functions to PEP8 format
Requires python smbus to be installed
run with: python demo-read_voltage.py
================================================
Initialise the ADC device using the default addresses and sample rate, change this value if you have changed the address selection jumpers
Sample rate can be 12,14, 16 or 18
"""
i2c_helper = ABEHelpers()
bus = i2c_helper.get_smbus()
adc = ADCDifferentialPi(bus, 0x68, 0x69, 18)
while (True):
# clear the console
os.system('clear')
# read from adc channels and print to screen
print ("Channel 1: %02f" % adc.read_voltage(1))
print ("Channel 2: %02f" % adc.read_voltage(2))
print ("Channel 3: %02f" % adc.read_voltage(3))
print ("Channel 4: %02f" % adc.read_voltage(4))
print ("Channel 5: %02f" % adc.read_voltage(5))
print ("Channel 6: %02f" % adc.read_voltage(6))
print ("Channel 7: %02f" % adc.read_voltage(7))
print ("Channel 8: %02f" % adc.read_voltage(8))
def hallSen():
# ADC Setup
channel = 1 # analog channel number (1-8 inclusive)
bitRate = 12 # programmable data rate
# 18 (3.75 SPS) less per sec. but more accurate
# 16 ( 15 SPS) --
# 14 ( 60 SPS) --
# 12 ( 240 SPS) more per sec. but less accurate
i2cAddr1 = 0x68 # these addresses are associated with the Address Config. 1
i2cAddr2 = 0x69
text_file = open("hallSensor_Data_1.txt", "w")
initTime = time.time()
text_file.write(str(globalValue))
text_file.flush()
global t1
global t2
flag = 0
diameter = 14 # need to find the actual diameter !!!
i2c_helper = ABEHelpers()
bus = i2c_helper.get_smbus()
adc = ADCDifferentialPi(bus, i2cAddr1, i2cAddr2, bitRate)
global mph
global flagThread
global killH
while True:
if killH == True:
text_file.close()
time.sleep(10)
else:
voltage = adc.read_voltage(
channel
) # voltage output from hall sensor (either a pos. or neg. value)
curTime = time.time(
) - initTime # calculates the current time from time acc. minus time started with
if voltage < 0.0 and flag == 0: # if voltage is neg. and we have not passed by the magnet yet
flag = 1
t1 = t2 # stores the previous curent time from curTime
t2 = curTime # stores the current time in curTime
rps = 1 / (t2 - t1) # revolutions per second
flagThread = 1
mph = rps * (math.pi) * diameter * (
3600 / 63360) # conversion from rps to miles per second
rpm = rps * 60
flagThread = 0
#mph = rps*60
#print( str(curTime) + "," + str(voltage) + "," + str(mph) )
text_file.write(str(curTime) + "," + str(rpm) + "\n")
text_file.flush()
elif voltage < 0.0 and flag == 1: # else if voltage is neg. but we are currently still passing by the magnet
#print( str(curTime) + "," + str(voltage) )
#text_file.write( str(curTime) + "," + str(voltage) + "\n" )
filler = 0
else: # else the voltage is positive (meaning the magnet is not next the the hall sensor)
flag = 0
#print( str(curTime) + "," + str(voltage) )
#text_file.write( str(curTime) + "," + str(voltage) + "\n" )
#time.sleep( 0.0100 )
text_file.close()
def hallSen(hallSensor_Num, adcChannel_Num, adcBitRate_Num, i2cAddr1_Num,
i2cAddr2_Num, outputFile_Name, diameter_Num, hallSensorActive):
# ADC Setup
channel = 1 # analog channel number (1-8 inclusive)
bitRate = 12 # programmable data rate
# 18 (3.75 SPS) less per sec. but more
# 16 ( 15 SPS) --
# 14 ( 60 SPS) --
# 12 ( 240 SPS) more per sec. but less accurate
i2cAddr1 = 0x68 # these address are associated with the Address Config. 1
i2cAddr2 = 0x69
text_file = open("hallSensor_Data1.txt", "w")
initTime = time.time()
t1 = 0
t2 = 0
flag = 0
diameter = 14 # need to find the actual diameter !!!
i2c_helper = ABEHelpers()
bus = i2c_helper.get_smbus()
adc = ADCDifferentialPi(bus, i2cAddr1, i2cAddr2, bitRate)
global activeMphValues
global flagThread
global activeHallSensors
activeHallSensors.append(hallSensorActive)
mph = 0
activeMphValues.append(mph)
#activeMphValues[hallSensor_Num-1] = mph
while activeHallSensors[hallSensor_Num - 1]:
voltage = adc.read_voltage(
channel
) # voltage output from hall sensor (either a pos. or neg. value)
curTime = time.time(
) - initTime # calculates the current time from time acc. minus time started with
if voltage < 0.0 and flag == 0: # if voltage is neg. and we have not passed by the magnet yet
flag = 1
t1 = t2 # stores the previous current time from curTime
t2 = curTime # stores the current time in curTime
rps = 1 / (t2 - t1) # revolutions per second
activeMphValues[
hallSensor_Num -
1] = (rps * (math.pi) * diameter * (3600 / 63360)
) / 11.5 # conversion from rps to miles per second
#temp = rps * (math.pi) * diameter * (3600/63360)
rpm = rps * 60
#activeMphValues[hallsensor_Num-1] = rpm
#mph = rps*60
#print( str(curTime + "," + str(voltage) + "," + str(mph) )
text_file.write(str(curTime) + "," + str(rpm) + "\n")
text_file.flush()
elif voltage < 0.0 and flag == 1: # else if voltage is neg. but we are currently still passing by the magnet
#print( str(curTime) + "," + str(voltage) )
#text_file.write( str(curTime) + "," str(voltage) + "\n" )
filler = 0
else: # else the voltage is positive (meaning the magnet is not next to the hall sensor)
flag = 0
#print( str(curTime) + "," + str(voltage) )
#text_file.write( str(curTime) + "," + str(voltage) + "\n" )
flag = 0 # added hopefully no problems, if problems comment this out
#time.sleep( 0.0100 )
text_file.close()
Version 1.0 Created 19/07/2016
Requires python smbus to be installed
run with: python demo-logvoltage.py
================================================
Initialise the ADC device using the default addresses and sample rate, change
this value if you have changed the address selection jumpers
Sample rate can be 12,14, 16 or 18
"""
i2c_helper = ABEHelpers()
bus = i2c_helper.get_smbus()
adc = ADCDifferentialPi(bus, 0x68, 0x69, 18)
def writetofile(texttowrtite):
f = open('adclog.txt', 'a')
f.write(str(datetime.datetime.now()) + " " + texttowrtite)
f.closed
while (True):
# read from adc channels and write to the log file
writetofile("Channel 1: %02f\n" % adc.read_voltage(1))
writetofile("Channel 2: %02f\n" % adc.read_voltage(2))
writetofile("Channel 3: %02f\n" % adc.read_voltage(3))
writetofile("Channel 4: %02f\n" % adc.read_voltage(4))
================================================
ABElectronics ADC Differential Pi 8-Channel ADC demo
Version 1.0 Created 09/05/2014
Version 1.1 16/11/2014 updated code and functions to PEP8 format
Requires python smbus to be installed
run with: python demo-read_voltage.py
================================================
Initialise the ADC device using the default addresses and sample rate, change this value if you have changed the address selection jumpers
Sample rate can be 12,14, 16 or 18
"""
i2c_helper = ABEHelpers()
bus = i2c_helper.get_smbus()
adc = ADCDifferentialPi(bus, 0x68, 0x69, 18)
while (True):
# clear the console
os.system('clear')
# read from adc channels and print to screen
print ("Channel 1: %d" % adc.read_raw(1))
print ("Sign Bit: %d" % adc.get_signbit())
# wait 0.5 seconds before reading the pins again
time.sleep(0.5)
Version 1.0 Created 30/10/2015
Requires python smbus to be installed
run with: python demo-resistance-thermometer.py
================================================
Initialise the ADC device using the default addresses and 18 bit sample rate,
change this value if you have changed the address selection jumpers
Bit rate can be 12,14, 16 or 18
"""
i2c_helper = ABEHelpers()
bus = i2c_helper.get_smbus()
adc = ADCDifferentialPi(bus, 0x68, 0x69, 18)
# the resistor values for the Wheatstone bridge are:
resistor1 = 10000
resistor2 = 10000
resistor3 = 10000
# Input voltage
voltin = 3.3
# Resistance thermometer values from datasheet
bResistance = 3435
t25Resistance = 10000
# Constants
t0 = 273.15;
t25 = t0 + 25;
# read sensors from https://www.wirelessthings.net/wireless-temperature-sensor # using USB wireless dongle SRF Stick - USB Radio (868-915Mhz) # https://www.wirelessthings.net/srf-stick-868-915-mhz-easy-to-use-usb-radio # and display to screen, each sensor has an ID starting with: # TA, TB or TC import serial baud = 9600 port = '/dev/ttyAMA0' ser = serial.Serial(port, baud) ser.timeout = 2 # Setup ADC Chip i2c_helper = ABEHelpers() bus = i2c_helper.get_smbus() adc = ADCDifferentialPi(bus, 0x6a, 0x6a, 16) # Setup GPIO pin to read pump running status GPIO.setmode(GPIO.BCM) GPIO.setup(19, GPIO.IN, pull_up_down = GPIO.PUD_DOWN) # 1 wire temperature sensors path1="/mnt/1wire/28.5B7DC4030000/temperature" path2="/mnt/1wire/28.8C37C4030000/temperature" path3="/mnt/1wire/28.611555030000/temperature" path4="/mnt/1wire/28.8945C4030000/temperature" # setup variables with default values varCurrentMinute = 0 varPrevMinute = 0