def createConfigMode(self):
if self.nim.isCompatible("DVB-S"):
choices = {"nothing": _("Not configured"), "simple": _("Simple"), "advanced": _("Advanced")}
if len(nimmanager.canEqualTo(self.slotid)) > 0:
choices["equal"] = _("Equal to")
if len(nimmanager.canDependOn(self.slotid)) > 0:
choices["satposdepends"] = _("Second cable of motorized LNB")
if len(nimmanager.canInternalConnectTo(self.slotid)) > 0:
choices["loopthrough_internal"] = _("Internal loopthrough to")
if len(nimmanager.canExternalConnectTo(self.slotid)) > 0:
choices["loopthrough_external"] = _("External loopthrough to")
self.nimConfig.configMode.setChoices(choices, default="simple")
def createConfigMode(self):
if self.nim.isCompatible("DVB-S"):
choices = {"nothing": _("Not configured"),
"simple": _("Simple"),
"advanced": _("Advanced")}
if len(nimmanager.canEqualTo(self.slotid)) > 0:
choices["equal"] = _("Equal to")
if len(nimmanager.canDependOn(self.slotid)) > 0:
choices["satposdepends"] = _("Second cable of motorized LNB")
if len(nimmanager.canInternalConnectTo(self.slotid)) > 0:
choices["loopthrough_internal"] = _("Internal loopthrough to")
if len(nimmanager.canExternalConnectTo(self.slotid)) > 0:
choices["loopthrough_external"] = _("External loopthrough to")
self.nimConfig.configMode.setChoices(choices, default = "simple")
def createSetup(self):
print "Creating setup"
self.list = [ ]
self.multiType = None
self.configMode = None
self.diseqcModeEntry = None
self.advancedSatsEntry = None
self.advancedLnbsEntry = None
self.advancedDiseqcMode = None
self.advancedUsalsEntry = None
self.advancedLof = None
self.advancedPowerMeasurement = None
self.turningSpeed = None
self.turnFastEpochBegin = None
self.turnFastEpochEnd = None
self.toneburst = None
self.committedDiseqcCommand = None
self.uncommittedDiseqcCommand = None
self.commandOrder = None
self.cableScanType = None
self.have_advanced = False
self.advancedUnicable = None
self.advancedType = None
self.advancedManufacturer = None
self.advancedSCR = None
self.advancedDiction = None
self.advancedConnected = None
self.advancedUnicableTuningAlgo = None
self.showAdditionalMotorOptions = None
self.selectSatsEntry = None
self.advancedSelectSatsEntry = None
self.singleSatEntry = None
if self.nim.isMultiType():
multiType = self.nimConfig.multiType
self.multiType = getConfigListEntry(_("Tuner type"), multiType)
self.list.append(self.multiType)
if self.nim.isCompatible("DVB-S"):
self.configMode = getConfigListEntry(_("Configuration mode"), self.nimConfig.configMode)
self.list.append(self.configMode)
if self.nimConfig.configMode.value == "simple": #simple setup
self.diseqcModeEntry = getConfigListEntry(pgettext("Satellite configuration mode", "Mode"), self.nimConfig.diseqcMode)
self.list.append(self.diseqcModeEntry)
if self.nimConfig.diseqcMode.value in ("single", "toneburst_a_b", "diseqc_a_b", "diseqc_a_b_c_d"):
self.createSimpleSetup(self.list, self.nimConfig.diseqcMode.value)
if self.nimConfig.diseqcMode.value in ("positioner", "positioner_select"):
self.createPositionerSetup(self.list)
elif self.nimConfig.configMode.value == "equal":
choices = []
nimlist = nimmanager.canEqualTo(self.nim.slot)
for id in nimlist:
choices.append((str(id), nimmanager.getNimDescription(id)))
self.nimConfig.connectedTo.setChoices(choices)
self.list.append(getConfigListEntry(_("Tuner"), self.nimConfig.connectedTo))
elif self.nimConfig.configMode.value == "satposdepends":
choices = []
nimlist = nimmanager.canDependOn(self.nim.slot)
for id in nimlist:
choices.append((str(id), nimmanager.getNimDescription(id)))
self.nimConfig.connectedTo.setChoices(choices)
self.list.append(getConfigListEntry(_("Tuner"), self.nimConfig.connectedTo))
elif self.nimConfig.configMode.value == "loopthrough_internal":
choices = []
print "internal connectable to:", nimmanager.canInternalConnectTo(self.slotid)
connectable = nimmanager.canInternalConnectTo(self.slotid)
for id in connectable:
choices.append((str(id), nimmanager.getNimDescription(id)))
self.nimConfig.connectedTo.setChoices(choices)
self.list.append(getConfigListEntry(_("Internal connected to"), self.nimConfig.connectedTo))
elif self.nimConfig.configMode.value == "loopthrough_external":
choices = []
print "external connectable to:", nimmanager.canExternalConnectTo(self.slotid)
connectable = nimmanager.canExternalConnectTo(self.slotid)
for id in connectable:
choices.append((str(id), nimmanager.getNimDescription(id)))
self.nimConfig.connectedTo.setChoices(choices)
self.list.append(getConfigListEntry(_("External connected to"), self.nimConfig.connectedTo))
elif self.nimConfig.configMode.value == "nothing":
pass
elif self.nimConfig.configMode.value == "advanced": # advanced
# SATs
self.advancedSatsEntry = getConfigListEntry(_("Satellite"), self.nimConfig.advanced.sats)
self.list.append(self.advancedSatsEntry)
current_config_sats = self.nimConfig.advanced.sats.value
if current_config_sats in ("3605", "3606"):
self.advancedSelectSatsEntry = getConfigListEntry(_("Press OK to select satellites"), self.nimConfig.pressOKtoList)
self.list.append(self.advancedSelectSatsEntry)
self.fillListWithAdvancedSatEntrys(self.nimConfig.advanced.sat[int(current_config_sats)])
else:
cur_orb_pos = self.nimConfig.advanced.sats.orbital_position
satlist = self.nimConfig.advanced.sat.keys()
if cur_orb_pos is not None:
if cur_orb_pos not in satlist:
cur_orb_pos = satlist[0]
self.fillListWithAdvancedSatEntrys(self.nimConfig.advanced.sat[cur_orb_pos])
self.have_advanced = True
if path.exists("/proc/stb/frontend/%d/tone_amplitude" % self.nim.slot) and config.usage.setup_level.index >= 2: # expert
self.list.append(getConfigListEntry(_("Tone amplitude"), self.nimConfig.toneAmplitude))
elif self.nim.isCompatible("DVB-C"):
self.configMode = getConfigListEntry(_("Configuration mode"), self.nimConfig.configMode)
self.list.append(self.configMode)
if self.nimConfig.configMode.value == "enabled":
self.list.append(getConfigListEntry(_("Network ID"), self.nimConfig.cable.scan_networkid))
self.cableScanType=getConfigListEntry(_("Used service scan type"), self.nimConfig.cable.scan_type)
self.list.append(self.cableScanType)
if self.nimConfig.cable.scan_type.value == "provider":
self.list.append(getConfigListEntry(_("Provider to scan"), self.nimConfig.cable.scan_provider))
else:
if self.nimConfig.cable.scan_type.value == "bands":
# TRANSLATORS: option name, indicating which type of (DVB-C) band should be scanned. The name of the band is printed in '%s'. E.g.: 'Scan EU MID band'
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU VHF I"), self.nimConfig.cable.scan_band_EU_VHF_I))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU MID"), self.nimConfig.cable.scan_band_EU_MID))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU VHF III"), self.nimConfig.cable.scan_band_EU_VHF_III))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU UHF IV"), self.nimConfig.cable.scan_band_EU_UHF_IV))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU UHF V"), self.nimConfig.cable.scan_band_EU_UHF_V))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU SUPER"), self.nimConfig.cable.scan_band_EU_SUPER))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU HYPER"), self.nimConfig.cable.scan_band_EU_HYPER))
self.list.append(getConfigListEntry(_("Scan %s band") % ("US LOW"), self.nimConfig.cable.scan_band_US_LOW))
self.list.append(getConfigListEntry(_("Scan %s band") % ("US MID"), self.nimConfig.cable.scan_band_US_MID))
self.list.append(getConfigListEntry(_("Scan %s band") % ("US HIGH"), self.nimConfig.cable.scan_band_US_HIGH))
self.list.append(getConfigListEntry(_("Scan %s band") % ("US SUPER"), self.nimConfig.cable.scan_band_US_SUPER))
self.list.append(getConfigListEntry(_("Scan %s band") % ("US HYPER"), self.nimConfig.cable.scan_band_US_HYPER))
elif self.nimConfig.cable.scan_type.value == "steps":
self.list.append(getConfigListEntry(_("Frequency scan step size(khz)"), self.nimConfig.cable.scan_frequency_steps))
# TRANSLATORS: option name, indicating which type of (DVB-C) modulation should be scanned. The modulation type is printed in '%s'. E.g.: 'Scan QAM16'
self.list.append(getConfigListEntry(_("Scan %s") % ("QAM16"), self.nimConfig.cable.scan_mod_qam16))
self.list.append(getConfigListEntry(_("Scan %s") % ("QAM32"), self.nimConfig.cable.scan_mod_qam32))
self.list.append(getConfigListEntry(_("Scan %s") % ("QAM64"), self.nimConfig.cable.scan_mod_qam64))
self.list.append(getConfigListEntry(_("Scan %s") % ("QAM128"), self.nimConfig.cable.scan_mod_qam128))
self.list.append(getConfigListEntry(_("Scan %s") % ("QAM256"), self.nimConfig.cable.scan_mod_qam256))
self.list.append(getConfigListEntry(_("Scan %s") % ("SR6900"), self.nimConfig.cable.scan_sr_6900))
self.list.append(getConfigListEntry(_("Scan %s") % ("SR6875"), self.nimConfig.cable.scan_sr_6875))
self.list.append(getConfigListEntry(_("Scan additional SR"), self.nimConfig.cable.scan_sr_ext1))
self.list.append(getConfigListEntry(_("Scan additional SR"), self.nimConfig.cable.scan_sr_ext2))
self.have_advanced = False
elif self.nim.isCompatible("DVB-T"):
self.configMode = getConfigListEntry(_("Configuration mode"), self.nimConfig.configMode)
self.list.append(self.configMode)
self.have_advanced = False
if self.nimConfig.configMode.value == "enabled":
self.list.append(getConfigListEntry(_("Terrestrial provider"), self.nimConfig.terrestrial))
self.list.append(getConfigListEntry(_("Enable 5V for active antenna"), self.nimConfig.terrestrial_5V))
else:
self.have_advanced = False
self["config"].list = self.list
self["config"].l.setList(self.list)
def fillListWithAdvancedSatEntrys(self, Sat):
lnbnum = int(Sat.lnb.value)
currLnb = self.nimConfig.advanced.lnb[lnbnum]
diction = None
if isinstance(currLnb, ConfigNothing):
currLnb = None
# LNBs
self.advancedLnbsEntry = getConfigListEntry(_("LNB"), Sat.lnb)
self.list.append(self.advancedLnbsEntry)
if currLnb:
if self.nim.isFBCLink():
if currLnb.lof.value != "unicable":
currLnb.lof.value = "unicable"
self.list.append(getConfigListEntry(_("Priority"), currLnb.prio))
self.advancedLof = getConfigListEntry("LOF", currLnb.lof)
self.list.append(self.advancedLof)
if currLnb.lof.value == "user_defined":
self.list.append(getConfigListEntry("LOF/L", currLnb.lofl))
self.list.append(getConfigListEntry("LOF/H", currLnb.lofh))
self.list.append(getConfigListEntry(_("Threshold"), currLnb.threshold))
if currLnb.lof.value == "unicable":
self.advancedUnicable = getConfigListEntry("Unicable "+_("Configuration mode"), currLnb.unicable)
self.list.append(self.advancedUnicable)
if currLnb.unicable.value == "unicable_user":
self.advancedDiction = getConfigListEntry(_("Diction"), currLnb.dictionuser)
self.list.append(self.advancedDiction)
if currLnb.dictionuser.value == "EN50494":
satcr = currLnb.satcruserEN50494
stcrvco = currLnb.satcrvcouserEN50494[currLnb.satcruserEN50494.index]
elif currLnb.dictionuser.value == "EN50607":
satcr = currLnb.satcruserEN50607
stcrvco = currLnb.satcrvcouserEN50607[currLnb.satcruserEN50607.index]
self.advancedSCR = getConfigListEntry(_("Channel"), satcr)
self.list.append(self.advancedSCR)
self.list.append(getConfigListEntry(_("Frequency"), stcrvco))
self.list.append(getConfigListEntry("LOF/L", currLnb.lofl))
self.list.append(getConfigListEntry("LOF/H", currLnb.lofh))
self.list.append(getConfigListEntry(_("Threshold"), currLnb.threshold))
elif currLnb.unicable.value == "unicable_matrix":
nimmanager.sec.reconstructUnicableDate(currLnb.unicableMatrixManufacturer, currLnb.unicableMatrix, currLnb)
manufacturer_name = currLnb.unicableMatrixManufacturer.value
manufacturer = currLnb.unicableMatrix[manufacturer_name]
product_name = manufacturer.product.value
self.advancedManufacturer = getConfigListEntry(_("Manufacturer"), currLnb.unicableMatrixManufacturer)
self.list.append(self.advancedManufacturer)
if product_name in manufacturer.scr:
diction = manufacturer.diction[product_name].value
self.advancedType = getConfigListEntry(_("Type"), manufacturer.product)
self.advancedSCR = getConfigListEntry(_("Channel"), manufacturer.scr[product_name])
self.list.append(self.advancedType)
self.list.append(self.advancedSCR)
self.list.append(getConfigListEntry(_("Frequency"), manufacturer.vco[product_name][manufacturer.scr[product_name].index]))
elif currLnb.unicable.value == "unicable_lnb":
nimmanager.sec.reconstructUnicableDate(currLnb.unicableLnbManufacturer, currLnb.unicableLnb, currLnb)
manufacturer_name = currLnb.unicableLnbManufacturer.value
manufacturer = currLnb.unicableLnb[manufacturer_name]
product_name = manufacturer.product.value
self.advancedManufacturer = getConfigListEntry(_("Manufacturer"), currLnb.unicableLnbManufacturer)
self.list.append(self.advancedManufacturer)
if product_name in manufacturer.scr:
diction = manufacturer.diction[product_name].value
self.advancedType = getConfigListEntry(_("Type"), manufacturer.product)
self.advancedSCR = getConfigListEntry(_("Channel"), manufacturer.scr[product_name])
self.list.append(self.advancedType)
self.list.append(self.advancedSCR)
self.list.append(getConfigListEntry(_("Frequency"), manufacturer.vco[product_name][manufacturer.scr[product_name].index]))
self.advancedUnicableTuningAlgo = getConfigListEntry(_("Tuning algorithm"), currLnb.unicableTuningAlgo)
self.list.append(self.advancedUnicableTuningAlgo)
choices = []
connectable = nimmanager.canInternalConnectTo(self.slotid)
for id in connectable:
choices.append((str(id), nimmanager.getNimDescription(id) + _(" (internal connection)")))
connectable = nimmanager.canExternalConnectTo(self.slotid)
for id in connectable:
choices.append((str(id), nimmanager.getNimDescription(id) + _(" (external connection)")))
if len(choices):
if self.nim.isFBCLink():
if self.nimConfig.advanced.unicableconnected.value != True:
self.nimConfig.advanced.unicableconnected.value = True
self.advancedConnected = getConfigListEntry(_("connected"), self.nimConfig.advanced.unicableconnected)
self.list.append(self.advancedConnected)
if self.nimConfig.advanced.unicableconnected.value == True:
self.nimConfig.advanced.unicableconnectedTo.setChoices(choices)
self.list.append(getConfigListEntry(_("Connected to"),self.nimConfig.advanced.unicableconnectedTo))
print "[Satconfig] unicableconnectedTo choices : ", choices
else: #no Unicable
self.list.append(getConfigListEntry(_("Voltage mode"), Sat.voltage))
self.list.append(getConfigListEntry(_("Increased voltage"), currLnb.increased_voltage))
self.list.append(getConfigListEntry(_("Tone mode"), Sat.tonemode))
if lnbnum < 65 and diction !="EN50607":
self.advancedDiseqcMode = getConfigListEntry(_("DiSEqC mode"), currLnb.diseqcMode)
self.list.append(self.advancedDiseqcMode)
if currLnb.diseqcMode.value != "none":
self.list.append(getConfigListEntry(_("Fast DiSEqC"), currLnb.fastDiseqc))
self.toneburst = getConfigListEntry(_("Toneburst"), currLnb.toneburst)
self.list.append(self.toneburst)
self.committedDiseqcCommand = getConfigListEntry(_("DiSEqC 1.0 command"), currLnb.commitedDiseqcCommand)
self.list.append(self.committedDiseqcCommand)
if currLnb.diseqcMode.value == "1_0":
if currLnb.toneburst.index and currLnb.commitedDiseqcCommand.index:
self.list.append(getConfigListEntry(_("Command order"), currLnb.commandOrder1_0))
else:
self.uncommittedDiseqcCommand = getConfigListEntry(_("DiSEqC 1.1 command"), currLnb.uncommittedDiseqcCommand)
self.list.append(self.uncommittedDiseqcCommand)
if currLnb.uncommittedDiseqcCommand.index:
if currLnb.commandOrder.value == "ct":
currLnb.commandOrder.value = "cut"
elif currLnb.commandOrder.value == "tc":
currLnb.commandOrder.value = "tcu"
else:
if currLnb.commandOrder.index & 1:
currLnb.commandOrder.value = "tc"
else:
currLnb.commandOrder.value = "ct"
self.commandOrder = getConfigListEntry(_("Command order"), currLnb.commandOrder)
if 1 < ((1 if currLnb.uncommittedDiseqcCommand.index else 0) + (1 if currLnb.commitedDiseqcCommand.index else 0) + (1 if currLnb.toneburst.index else 0)):
self.list.append(self.commandOrder)
if currLnb.uncommittedDiseqcCommand.index:
self.list.append(getConfigListEntry(_("DiSEqC 1.1 repeats"), currLnb.diseqcRepeats))
self.list.append(getConfigListEntry(_("Sequence repeat"), currLnb.sequenceRepeat))
if currLnb.diseqcMode.value == "1_2":
if SystemInfo["CanMeasureFrontendInputPower"]:
self.advancedPowerMeasurement = getConfigListEntry(_("Use power measurement"), currLnb.powerMeasurement)
self.list.append(self.advancedPowerMeasurement)
if currLnb.powerMeasurement.value:
self.list.append(getConfigListEntry(_("Power threshold in mA"), currLnb.powerThreshold))
self.turningSpeed = getConfigListEntry(_("Rotor turning speed"), currLnb.turningSpeed)
self.list.append(self.turningSpeed)
if currLnb.turningSpeed.value == "fast epoch":
self.turnFastEpochBegin = getConfigListEntry(_("Begin time"), currLnb.fastTurningBegin)
self.turnFastEpochEnd = getConfigListEntry(_("End time"), currLnb.fastTurningEnd)
self.list.append(self.turnFastEpochBegin)
self.list.append(self.turnFastEpochEnd)
else:
if currLnb.powerMeasurement.value:
currLnb.powerMeasurement.value = False
currLnb.powerMeasurement.save()
self.advancedUsalsEntry = getConfigListEntry(_("Use USALS for this sat"), Sat.usals)
if lnbnum < 65:
self.list.append(self.advancedUsalsEntry)
if Sat.usals.value:
self.list.append(getConfigListEntry(_("Longitude"), currLnb.longitude))
self.list.append(getConfigListEntry(" ", currLnb.longitudeOrientation))
self.list.append(getConfigListEntry(_("Latitude"), currLnb.latitude))
self.list.append(getConfigListEntry(" ", currLnb.latitudeOrientation))
else:
self.list.append(getConfigListEntry(_("Stored position"), Sat.rotorposition))
if not hasattr(self, 'additionalMotorOptions'):
self.additionalMotorOptions = ConfigYesNo(False)
self.showAdditionalMotorOptions = getConfigListEntry(_("Extra motor options"), self.additionalMotorOptions)
self.list.append(self.showAdditionalMotorOptions)
if self.additionalMotorOptions.value:
self.list.append(getConfigListEntry(" " + _("Horizontal turning speed") + " [" + chr(176) + "/sec]", currLnb.turningspeedH))
self.list.append(getConfigListEntry(" " + _("Vertical turning speed") + " [" + chr(176) + "/sec]", currLnb.turningspeedV))
self.list.append(getConfigListEntry(" " + _("Turning step size") + " [" + chr(176) + "]", currLnb.tuningstepsize))
self.list.append(getConfigListEntry(" " + _("Max memory positions"), currLnb.rotorPositions))
def createSetup(self):
self.list = [ ]
self.multiType = None
self.configMode = None
self.diseqcModeEntry = None
self.advancedSatsEntry = None
self.advancedLnbsEntry = None
self.advancedDiseqcMode = None
self.advancedUsalsEntry = None
self.advancedLof = None
self.advancedPowerMeasurement = None
self.turningSpeed = None
self.turnFastEpochBegin = None
self.turnFastEpochEnd = None
self.toneburst = None
self.committedDiseqcCommand = None
self.uncommittedDiseqcCommand = None
self.commandOrder = None
self.cableScanType = None
self.cableConfigScanDetails = None
self.have_advanced = False
self.advancedUnicable = None
self.advancedFormat = None
self.advancedPosition = None
self.advancedType = None
self.advancedManufacturer = None
self.advancedSCR = None
self.advancedConnected = None
self.showAdditionalMotorOptions = None
self.selectSatsEntry = None
self.advancedSelectSatsEntry = None
self.singleSatEntry = None
self.terrestrialRegionsEntry = None
self.cableRegionsEntry = None
if not hasattr(self, "terrestrialCountriesEntry"):
self.terrestrialCountriesEntry = None
if not hasattr(self, "cableCountriesEntry"):
self.cableCountriesEntry = None
self.toneamplitude = None
self.scpc = None
self.forcelnbpower = None
self.forcetoneburst = None
self.terrestrialRegionsEntry = None
self.cableRegionsEntry = None
if not hasattr(self, "terrestrialCountriesEntry"):
self.terrestrialCountriesEntry = None
if not hasattr(self, "cableCountriesEntry"):
self.cableCountriesEntry = None
if self.nim.isMultiType():
multiType = self.nimConfig.multiType
self.multiType = getConfigListEntry(_("Tuner type"), multiType)
self.list.append(self.multiType)
if self.nim.isCompatible("DVB-S"):
self.configMode = getConfigListEntry(_("Configuration mode"), self.nimConfig.configMode)
self.list.append(self.configMode)
if self.nimConfig.configMode.value == "simple": #simple setup
self.diseqcModeEntry = getConfigListEntry(pgettext("Satellite configuration mode", "Mode"), self.nimConfig.diseqcMode)
self.list.append(self.diseqcModeEntry)
if self.nimConfig.diseqcMode.value in ("single", "toneburst_a_b", "diseqc_a_b", "diseqc_a_b_c_d"):
self.createSimpleSetup(self.list, self.nimConfig.diseqcMode.value)
if self.nimConfig.diseqcMode.value in ("positioner", "positioner_select"):
self.createPositionerSetup(self.list)
elif self.nimConfig.configMode.value == "equal":
choices = []
nimlist = nimmanager.canEqualTo(self.nim.slot)
for id in nimlist:
choices.append((str(id), nimmanager.getNimDescription(id)))
self.nimConfig.connectedTo.setChoices(choices)
self.list.append(getConfigListEntry(_("Tuner"), self.nimConfig.connectedTo))
elif self.nimConfig.configMode.value == "satposdepends":
choices = []
nimlist = nimmanager.canDependOn(self.nim.slot)
for id in nimlist:
choices.append((str(id), nimmanager.getNimDescription(id)))
self.nimConfig.connectedTo.setChoices(choices)
self.list.append(getConfigListEntry(_("Tuner"), self.nimConfig.connectedTo))
elif self.nimConfig.configMode.value == "loopthrough_internal":
choices = []
print "internal connectable to:", nimmanager.canInternalConnectTo(self.slotid)
connectable = nimmanager.canInternalConnectTo(self.slotid)
for id in connectable:
choices.append((str(id), nimmanager.getNimDescription(id)))
self.nimConfig.connectedTo.setChoices(choices)
self.list.append(getConfigListEntry(_("Internal connected to"), self.nimConfig.connectedTo))
elif self.nimConfig.configMode.value == "loopthrough_external":
choices = []
print "external connectable to:", nimmanager.canExternalConnectTo(self.slotid)
connectable = nimmanager.canExternalConnectTo(self.slotid)
for id in connectable:
choices.append((str(id), nimmanager.getNimDescription(id)))
self.nimConfig.connectedTo.setChoices(choices)
self.list.append(getConfigListEntry(_("External connected to"), self.nimConfig.connectedTo))
elif self.nimConfig.configMode.value == "nothing":
pass
elif self.nimConfig.configMode.value == "advanced": # advanced
# SATs
self.advancedSatsEntry = getConfigListEntry(_("Satellite"), self.nimConfig.advanced.sats)
self.list.append(self.advancedSatsEntry)
current_config_sats = self.nimConfig.advanced.sats.value
if current_config_sats in ("3605", "3606"):
self.advancedSelectSatsEntry = getConfigListEntry(_("Press OK to select satellites"), self.nimConfig.pressOKtoList)
self.list.append(self.advancedSelectSatsEntry)
self.fillListWithAdvancedSatEntrys(self.nimConfig.advanced.sat[int(current_config_sats)])
else:
cur_orb_pos = self.nimConfig.advanced.sats.orbital_position
satlist = self.nimConfig.advanced.sat.keys()
if cur_orb_pos is not None:
if cur_orb_pos not in satlist:
cur_orb_pos = satlist[0]
self.fillListWithAdvancedSatEntrys(self.nimConfig.advanced.sat[cur_orb_pos])
self.have_advanced = True
if self.nimConfig.configMode.value != "nothing" and config.usage.setup_level.index >= 2:
if fileExists("/proc/stb/frontend/%d/tone_amplitude" % self.nim.slot):
self.toneamplitude = getConfigListEntry(_("Tone amplitude"), self.nimConfig.toneAmplitude)
self.list.append(self.toneamplitude)
if fileExists("/proc/stb/frontend/%d/use_scpc_optimized_search_range" % self.nim.slot):
self.scpc = getConfigListEntry(_("SCPC optimized search range"), self.nimConfig.scpcSearchRange)
self.list.append(self.scpc)
if SystemInfo["HasForceLNBOn"] and self.nim.isFBCRoot():
self.forcelnbpower = getConfigListEntry(_("Force LNB Power"), config.misc.forceLnbPower)
self.list.append(self.forcelnbpower)
if SystemInfo["HasForceToneburst"] and self.nim.isFBCRoot():
self.forcetoneburst = getConfigListEntry(_("Force ToneBurst"), config.misc.forceToneBurst)
self.list.append(self.forcetoneburst)
elif self.nim.isCompatible("DVB-C"):
self.configMode = getConfigListEntry(_("Configuration mode"), self.nimConfig.configMode)
self.list.append(self.configMode)
if self.nimConfig.configMode.value == "enabled":
self.list.append(getConfigListEntry(_("Network ID"), self.nimConfig.cable.scan_networkid))
self.cableScanType=getConfigListEntry(_("Used service scan type"), self.nimConfig.cable.scan_type)
self.list.append(self.cableScanType)
if self.nimConfig.cable.scan_type.value == "provider":
# country/region tier one
if self.cableCountriesEntry is None:
cablecountrycodelist = nimmanager.getCablesCountrycodeList()
cablecountrycode = nimmanager.getCableCountrycode(self.slotid)
default = cablecountrycode in cablecountrycodelist and cablecountrycode or None
choices = [("all", _("All"))]+sorted([(x, self.countrycodeToCountry(x)) for x in cablecountrycodelist], key=lambda listItem: listItem[1])
self.cableCountries = ConfigSelection(default = default, choices = choices)
self.cableCountriesEntry = getConfigListEntry(_("Country"), self.cableCountries)
self.originalCableRegion = self.nimConfig.cable.scan_provider.value
# country/region tier two
if self.cableCountries.value == "all":
cableNames = [x[0] for x in sorted(sorted(nimmanager.getCablesList(), key=lambda listItem: listItem[0]), key=lambda listItem: self.countrycodeToCountry(listItem[2]))]
else:
cableNames = sorted([x[0] for x in nimmanager.getCablesByCountrycode(self.cableCountries.value)])
default = self.nimConfig.cable.scan_provider.value in cableNames and self.nimConfig.cable.scan_provider.value or None
self.cableRegions = ConfigSelection(default = default, choices = cableNames)
def updateCableProvider(configEntry):
self.nimConfig.cable.scan_provider.value = configEntry.value
self.nimConfig.cable.scan_provider.save()
self.cableRegions.addNotifier(updateCableProvider)
self.cableRegionsEntry = getConfigListEntry(_("Region"), self.cableRegions)
self.list.append(self.cableCountriesEntry)
self.list.append(self.cableRegionsEntry)
else:
self.cableConfigScanDetails = getConfigListEntry(_("Config Scan Details"), self.nimConfig.cable.config_scan_details)
self.list.append(self.cableConfigScanDetails)
if self.nimConfig.cable.config_scan_details.value:
if self.nimConfig.cable.scan_type.value == "bands":
# TRANSLATORS: option name, indicating which type of (DVB-C) band should be scanned. The name of the band is printed in '%s'. E.g.: 'Scan EU MID band'
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU VHF I"), self.nimConfig.cable.scan_band_EU_VHF_I))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU MID"), self.nimConfig.cable.scan_band_EU_MID))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU VHF III"), self.nimConfig.cable.scan_band_EU_VHF_III))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU UHF IV"), self.nimConfig.cable.scan_band_EU_UHF_IV))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU UHF V"), self.nimConfig.cable.scan_band_EU_UHF_V))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU SUPER"), self.nimConfig.cable.scan_band_EU_SUPER))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU HYPER"), self.nimConfig.cable.scan_band_EU_HYPER))
self.list.append(getConfigListEntry(_("Scan %s band") % ("US LOW"), self.nimConfig.cable.scan_band_US_LOW))
self.list.append(getConfigListEntry(_("Scan %s band") % ("US MID"), self.nimConfig.cable.scan_band_US_MID))
self.list.append(getConfigListEntry(_("Scan %s band") % ("US HIGH"), self.nimConfig.cable.scan_band_US_HIGH))
self.list.append(getConfigListEntry(_("Scan %s band") % ("US SUPER"), self.nimConfig.cable.scan_band_US_SUPER))
self.list.append(getConfigListEntry(_("Scan %s band") % ("US HYPER"), self.nimConfig.cable.scan_band_US_HYPER))
else:
self.list.append(getConfigListEntry(_("Frequency scan step size(khz)"), self.nimConfig.cable.scan_frequency_steps))
# TRANSLATORS: option name, indicating which type of (DVB-C) modulation should be scanned. The modulation type is printed in '%s'. E.g.: 'Scan QAM16'
self.list.append(getConfigListEntry(_("Scan %s") % ("QAM16"), self.nimConfig.cable.scan_mod_qam16))
self.list.append(getConfigListEntry(_("Scan %s") % ("QAM32"), self.nimConfig.cable.scan_mod_qam32))
self.list.append(getConfigListEntry(_("Scan %s") % ("QAM64"), self.nimConfig.cable.scan_mod_qam64))
self.list.append(getConfigListEntry(_("Scan %s") % ("QAM128"), self.nimConfig.cable.scan_mod_qam128))
self.list.append(getConfigListEntry(_("Scan %s") % ("QAM256"), self.nimConfig.cable.scan_mod_qam256))
self.list.append(getConfigListEntry(_("Scan %s") % ("SR6900"), self.nimConfig.cable.scan_sr_6900))
self.list.append(getConfigListEntry(_("Scan %s") % ("SR6875"), self.nimConfig.cable.scan_sr_6875))
self.list.append(getConfigListEntry(_("Scan additional SR"), self.nimConfig.cable.scan_sr_ext1))
self.list.append(getConfigListEntry(_("Scan additional SR"), self.nimConfig.cable.scan_sr_ext2))
self.have_advanced = False
elif self.nim.isCompatible("DVB-T"):
self.configMode = getConfigListEntry(_("Configuration mode"), self.nimConfig.configMode)
self.list.append(self.configMode)
self.have_advanced = False
if self.nimConfig.configMode.value == "enabled":
# country/region tier one
if self.terrestrialCountriesEntry is None:
terrestrialcountrycodelist = nimmanager.getTerrestrialsCountrycodeList()
terrestrialcountrycode = nimmanager.getTerrestrialCountrycode(self.slotid)
default = terrestrialcountrycode in terrestrialcountrycodelist and terrestrialcountrycode or None
choices = [("all", _("All"))]+sorted([(x, self.countrycodeToCountry(x)) for x in terrestrialcountrycodelist], key=lambda listItem: listItem[1])
self.terrestrialCountries = ConfigSelection(default = default, choices = choices)
self.terrestrialCountriesEntry = getConfigListEntry(_("Country"), self.terrestrialCountries)
self.originalTerrestrialRegion = self.nimConfig.terrestrial.value
# country/region tier two
if self.terrestrialCountries.value == "all":
terrstrialNames = [x[0] for x in sorted(sorted(nimmanager.getTerrestrialsList(), key=lambda listItem: listItem[0]), key=lambda listItem: self.countrycodeToCountry(listItem[2]))]
else:
terrstrialNames = sorted([x[0] for x in nimmanager.getTerrestrialsByCountrycode(self.terrestrialCountries.value)])
default = self.nimConfig.terrestrial.value in terrstrialNames and self.nimConfig.terrestrial.value or None
self.terrestrialRegions = ConfigSelection(default = default, choices = terrstrialNames)
def updateTerrestrialProvider(configEntry):
self.nimConfig.terrestrial.value = configEntry.value
self.nimConfig.terrestrial.save()
self.terrestrialRegions.addNotifier(updateTerrestrialProvider)
self.terrestrialRegionsEntry = getConfigListEntry(_("Region"), self.terrestrialRegions)
self.list.append(self.terrestrialCountriesEntry)
self.list.append(self.terrestrialRegionsEntry)
self.list.append(getConfigListEntry(_("Enable 5V for active antenna"), self.nimConfig.terrestrial_5V))
elif self.nim.isCompatible("ATSC"):
self.configMode = getConfigListEntry(_("Configuration mode"), self.nimConfig.configMode)
self.list.append(self.configMode)
if self.nimConfig.configMode.value == "enabled":
self.list.append(getConfigListEntry(_("ATSC provider"), self.nimConfig.atsc))
self.have_advanced = False
else:
self.have_advanced = False
self["config"].list = self.list
self["config"].l.setList(self.list)
self.setTextKeyYellow()
def createSetup(self):
print "Creating setup"
self.list = [ ]
self.multiType = None
self.configMode = None
self.diseqcModeEntry = None
self.advancedSatsEntry = None
self.advancedLnbsEntry = None
self.advancedDiseqcMode = None
self.advancedUsalsEntry = None
self.advancedLof = None
self.advancedPowerMeasurement = None
self.turningSpeed = None
self.turnFastEpochBegin = None
self.turnFastEpochEnd = None
self.toneburst = None
self.committedDiseqcCommand = None
self.uncommittedDiseqcCommand = None
self.commandOrder = None
self.cableScanType = None
self.have_advanced = False
self.advancedUnicable = None
self.advancedType = None
self.advancedManufacturer = None
self.advancedSCR = None
self.advancedConnected = None
self.showAdditionalMotorOptions = None
self.selectSatsEntry = None
self.advancedSelectSatsEntry = None
self.singleSatEntry = None
if self.nim.isMultiType():
multiType = self.nimConfig.multiType
self.multiType = getConfigListEntry(_("Tuner type"), multiType)
self.list.append(self.multiType)
if self.nim.isCompatible("DVB-S"):
self.configMode = getConfigListEntry(_("Configuration mode"), self.nimConfig.configMode)
self.list.append(self.configMode)
if self.nimConfig.configMode.value == "simple": #simple setup
self.diseqcModeEntry = getConfigListEntry(pgettext("Satellite configuration mode", "Mode"), self.nimConfig.diseqcMode)
self.list.append(self.diseqcModeEntry)
if self.nimConfig.diseqcMode.value in ("single", "toneburst_a_b", "diseqc_a_b", "diseqc_a_b_c_d"):
self.createSimpleSetup(self.list, self.nimConfig.diseqcMode.value)
if self.nimConfig.diseqcMode.value in ("positioner", "positioner_select"):
self.createPositionerSetup(self.list)
elif self.nimConfig.configMode.value == "equal":
choices = []
nimlist = nimmanager.canEqualTo(self.nim.slot)
for id in nimlist:
choices.append((str(id), nimmanager.getNimDescription(id)))
self.nimConfig.connectedTo.setChoices(choices)
self.list.append(getConfigListEntry(_("Tuner"), self.nimConfig.connectedTo))
elif self.nimConfig.configMode.value == "satposdepends":
choices = []
nimlist = nimmanager.canDependOn(self.nim.slot)
for id in nimlist:
choices.append((str(id), nimmanager.getNimDescription(id)))
self.nimConfig.connectedTo.setChoices(choices)
self.list.append(getConfigListEntry(_("Tuner"), self.nimConfig.connectedTo))
elif self.nimConfig.configMode.value == "loopthrough_internal":
choices = []
print "internal connectable to:", nimmanager.canInternalConnectTo(self.slotid)
connectable = nimmanager.canInternalConnectTo(self.slotid)
for id in connectable:
choices.append((str(id), nimmanager.getNimDescription(id)))
self.nimConfig.connectedTo.setChoices(choices)
self.list.append(getConfigListEntry(_("Internal connected to"), self.nimConfig.connectedTo))
elif self.nimConfig.configMode.value == "loopthrough_external":
choices = []
print "external connectable to:", nimmanager.canExternalConnectTo(self.slotid)
connectable = nimmanager.canExternalConnectTo(self.slotid)
for id in connectable:
choices.append((str(id), nimmanager.getNimDescription(id)))
self.nimConfig.connectedTo.setChoices(choices)
self.list.append(getConfigListEntry(_("External connected to"), self.nimConfig.connectedTo))
elif self.nimConfig.configMode.value == "nothing":
pass
elif self.nimConfig.configMode.value == "advanced": # advanced
# SATs
self.advancedSatsEntry = getConfigListEntry(_("Satellite"), self.nimConfig.advanced.sats)
self.list.append(self.advancedSatsEntry)
current_config_sats = self.nimConfig.advanced.sats.value
if current_config_sats in ("3605", "3606"):
self.advancedSelectSatsEntry = getConfigListEntry(_("Press OK to select satellites"), self.nimConfig.pressOKtoList)
self.list.append(self.advancedSelectSatsEntry)
self.fillListWithAdvancedSatEntrys(self.nimConfig.advanced.sat[int(current_config_sats)])
else:
cur_orb_pos = self.nimConfig.advanced.sats.orbital_position
satlist = self.nimConfig.advanced.sat.keys()
if cur_orb_pos is not None:
if cur_orb_pos not in satlist:
cur_orb_pos = satlist[0]
self.fillListWithAdvancedSatEntrys(self.nimConfig.advanced.sat[cur_orb_pos])
self.have_advanced = True
if path.exists("/proc/stb/frontend/%d/tone_amplitude" % self.nim.slot) and config.usage.setup_level.index >= 2: # expert
self.list.append(getConfigListEntry(_("Tone amplitude"), self.nimConfig.toneAmplitude))
elif self.nim.isCompatible("DVB-C"):
self.configMode = getConfigListEntry(_("Configuration mode"), self.nimConfig.configMode)
self.list.append(self.configMode)
if self.nimConfig.configMode.value == "enabled":
self.list.append(getConfigListEntry(_("Network ID"), self.nimConfig.cable.scan_networkid))
self.cableScanType=getConfigListEntry(_("Used service scan type"), self.nimConfig.cable.scan_type)
self.list.append(self.cableScanType)
if self.nimConfig.cable.scan_type.value == "provider":
self.list.append(getConfigListEntry(_("Provider to scan"), self.nimConfig.cable.scan_provider))
else:
if self.nimConfig.cable.scan_type.value == "bands":
# TRANSLATORS: option name, indicating which type of (DVB-C) band should be scanned. The name of the band is printed in '%s'. E.g.: 'Scan EU MID band'
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU VHF I"), self.nimConfig.cable.scan_band_EU_VHF_I))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU MID"), self.nimConfig.cable.scan_band_EU_MID))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU VHF III"), self.nimConfig.cable.scan_band_EU_VHF_III))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU UHF IV"), self.nimConfig.cable.scan_band_EU_UHF_IV))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU UHF V"), self.nimConfig.cable.scan_band_EU_UHF_V))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU SUPER"), self.nimConfig.cable.scan_band_EU_SUPER))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU HYPER"), self.nimConfig.cable.scan_band_EU_HYPER))
self.list.append(getConfigListEntry(_("Scan %s band") % ("US LOW"), self.nimConfig.cable.scan_band_US_LOW))
self.list.append(getConfigListEntry(_("Scan %s band") % ("US MID"), self.nimConfig.cable.scan_band_US_MID))
self.list.append(getConfigListEntry(_("Scan %s band") % ("US HIGH"), self.nimConfig.cable.scan_band_US_HIGH))
self.list.append(getConfigListEntry(_("Scan %s band") % ("US SUPER"), self.nimConfig.cable.scan_band_US_SUPER))
self.list.append(getConfigListEntry(_("Scan %s band") % ("US HYPER"), self.nimConfig.cable.scan_band_US_HYPER))
elif self.nimConfig.cable.scan_type.value == "steps":
self.list.append(getConfigListEntry(_("Frequency scan step size(khz)"), self.nimConfig.cable.scan_frequency_steps))
# TRANSLATORS: option name, indicating which type of (DVB-C) modulation should be scanned. The modulation type is printed in '%s'. E.g.: 'Scan QAM16'
self.list.append(getConfigListEntry(_("Scan %s") % ("QAM16"), self.nimConfig.cable.scan_mod_qam16))
self.list.append(getConfigListEntry(_("Scan %s") % ("QAM32"), self.nimConfig.cable.scan_mod_qam32))
self.list.append(getConfigListEntry(_("Scan %s") % ("QAM64"), self.nimConfig.cable.scan_mod_qam64))
self.list.append(getConfigListEntry(_("Scan %s") % ("QAM128"), self.nimConfig.cable.scan_mod_qam128))
self.list.append(getConfigListEntry(_("Scan %s") % ("QAM256"), self.nimConfig.cable.scan_mod_qam256))
self.list.append(getConfigListEntry(_("Scan %s") % ("SR6900"), self.nimConfig.cable.scan_sr_6900))
self.list.append(getConfigListEntry(_("Scan %s") % ("SR6875"), self.nimConfig.cable.scan_sr_6875))
self.list.append(getConfigListEntry(_("Scan additional SR"), self.nimConfig.cable.scan_sr_ext1))
self.list.append(getConfigListEntry(_("Scan additional SR"), self.nimConfig.cable.scan_sr_ext2))
self.have_advanced = False
elif self.nim.isCompatible("DVB-T"):
self.configMode = getConfigListEntry(_("Configuration mode"), self.nimConfig.configMode)
self.list.append(self.configMode)
self.have_advanced = False
if self.nimConfig.configMode.value == "enabled":
self.list.append(getConfigListEntry(_("Terrestrial provider"), self.nimConfig.terrestrial))
self.list.append(getConfigListEntry(_("Enable 5V for active antenna"), self.nimConfig.terrestrial_5V))
else:
self.have_advanced = False
self["config"].list = self.list
self["config"].l.setList(self.list)
def fillListWithAdvancedSatEntrys(self, Sat):
lnbnum = int(Sat.lnb.value)
currLnb = self.nimConfig.advanced.lnb[lnbnum]
if isinstance(currLnb, ConfigNothing):
currLnb = None
# LNBs
self.advancedLnbsEntry = getConfigListEntry(_("LNB"), Sat.lnb)
self.list.append(self.advancedLnbsEntry)
if currLnb:
self.list.append(getConfigListEntry(_("Priority"), currLnb.prio))
self.advancedLof = getConfigListEntry("LOF", currLnb.lof)
self.list.append(self.advancedLof)
if currLnb.lof.value == "user_defined":
self.list.append(getConfigListEntry("LOF/L", currLnb.lofl))
self.list.append(getConfigListEntry("LOF/H", currLnb.lofh))
self.list.append(getConfigListEntry(_("Threshold"), currLnb.threshold))
if currLnb.lof.value == "unicable" or currLnb.lof.value == "jess":
self.advancedUnicable = getConfigListEntry("Unicable "+_("Configuration mode"), currLnb.unicable)
self.list.append(self.advancedUnicable)
if currLnb.unicable.value == "unicable_user":
self.advancedSCR = getConfigListEntry(_("Channel"), currLnb.satcruser)
self.list.append(self.advancedSCR)
self.list.append(getConfigListEntry(_("Frequency"), currLnb.satcrvcouser[currLnb.satcruser.index]))
self.list.append(getConfigListEntry("LOF/L", currLnb.lofl))
self.list.append(getConfigListEntry("LOF/H", currLnb.lofh))
self.list.append(getConfigListEntry(_("Threshold"), currLnb.threshold))
elif currLnb.unicable.value == "unicable_matrix":
manufacturer_name = currLnb.unicableMatrixManufacturer.value
manufacturer = currLnb.unicableMatrix[manufacturer_name]
product_name = manufacturer.product.value
self.advancedManufacturer = getConfigListEntry(_("Manufacturer"), currLnb.unicableMatrixManufacturer)
self.advancedType = getConfigListEntry(_("Type"), manufacturer.product)
self.advancedSCR = getConfigListEntry(_("Channel"), manufacturer.scr[product_name])
self.list.append(self.advancedManufacturer)
self.list.append(self.advancedType)
self.list.append(self.advancedSCR)
self.list.append(getConfigListEntry(_("Frequency"), manufacturer.vco[product_name][manufacturer.scr[product_name].index]))
elif currLnb.unicable.value == "unicable_lnb":
manufacturer_name = currLnb.unicableLnbManufacturer.value
manufacturer = currLnb.unicableLnb[manufacturer_name]
product_name = manufacturer.product.value
self.advancedManufacturer = getConfigListEntry(_("Manufacturer"), currLnb.unicableLnbManufacturer)
self.advancedType = getConfigListEntry(_("Type"), manufacturer.product)
self.advancedSCR = getConfigListEntry(_("Channel"), manufacturer.scr[product_name])
self.list.append(self.advancedManufacturer)
self.list.append(self.advancedType)
self.list.append(self.advancedSCR)
self.list.append(getConfigListEntry(_("Frequency"), manufacturer.vco[product_name][manufacturer.scr[product_name].index]))
choices = []
connectable = nimmanager.canInternalConnectTo(self.slotid)
for id in connectable:
choices.append((str(id), nimmanager.getNimDescription(id) + _(" (internal connection)")))
connectable = nimmanager.canExternalConnectTo(self.slotid)
for id in connectable:
choices.append((str(id), nimmanager.getNimDescription(id) + _(" (external connection)")))
if len(choices):
self.advancedConnected = getConfigListEntry(_("connected"), self.nimConfig.advanced.unicableconnected)
self.list.append(self.advancedConnected)
if self.nimConfig.advanced.unicableconnected.value == True:
self.nimConfig.advanced.unicableconnectedTo.setChoices(choices)
self.list.append(getConfigListEntry(_("Connected to"),self.nimConfig.advanced.unicableconnectedTo))
else: #kein Unicable
self.list.append(getConfigListEntry(_("Voltage mode"), Sat.voltage))
self.list.append(getConfigListEntry(_("Increased voltage"), currLnb.increased_voltage))
self.list.append(getConfigListEntry(_("Tone mode"), Sat.tonemode))
if lnbnum < 65 and not currLnb.unicable.value == "unicable_matrix" and not currLnb.unicable.value == "unicable_lnb":
self.advancedDiseqcMode = getConfigListEntry(_("DiSEqC mode"), currLnb.diseqcMode)
self.list.append(self.advancedDiseqcMode)
if currLnb.diseqcMode.value != "none":
self.list.append(getConfigListEntry(_("Fast DiSEqC"), currLnb.fastDiseqc))
self.toneburst = getConfigListEntry(_("Toneburst"), currLnb.toneburst)
self.list.append(self.toneburst)
self.committedDiseqcCommand = getConfigListEntry(_("DiSEqC 1.0 command"), currLnb.commitedDiseqcCommand)
self.list.append(self.committedDiseqcCommand)
if currLnb.diseqcMode.value == "1_0":
if currLnb.toneburst.index and currLnb.commitedDiseqcCommand.index:
self.list.append(getConfigListEntry(_("Command order"), currLnb.commandOrder1_0))
else:
self.uncommittedDiseqcCommand = getConfigListEntry(_("DiSEqC 1.1 command"), currLnb.uncommittedDiseqcCommand)
self.list.append(self.uncommittedDiseqcCommand)
if currLnb.uncommittedDiseqcCommand.index:
if currLnb.commandOrder.value == "ct":
currLnb.commandOrder.value = "cut"
elif currLnb.commandOrder.value == "tc":
currLnb.commandOrder.value = "tcu"
else:
if currLnb.commandOrder.index & 1:
currLnb.commandOrder.value = "tc"
else:
currLnb.commandOrder.value = "ct"
self.commandOrder = getConfigListEntry(_("Command order"), currLnb.commandOrder)
if 1 < ((1 if currLnb.uncommittedDiseqcCommand.index else 0) + (1 if currLnb.commitedDiseqcCommand.index else 0) + (1 if currLnb.toneburst.index else 0)):
self.list.append(self.commandOrder)
if currLnb.uncommittedDiseqcCommand.index:
self.list.append(getConfigListEntry(_("DiSEqC 1.1 repeats"), currLnb.diseqcRepeats))
self.list.append(getConfigListEntry(_("Sequence repeat"), currLnb.sequenceRepeat))
if currLnb.diseqcMode.value == "1_2":
if SystemInfo["CanMeasureFrontendInputPower"]:
self.advancedPowerMeasurement = getConfigListEntry(_("Use power measurement"), currLnb.powerMeasurement)
self.list.append(self.advancedPowerMeasurement)
if currLnb.powerMeasurement.value:
self.list.append(getConfigListEntry(_("Power threshold in mA"), currLnb.powerThreshold))
self.turningSpeed = getConfigListEntry(_("Rotor turning speed"), currLnb.turningSpeed)
self.list.append(self.turningSpeed)
if currLnb.turningSpeed.value == "fast epoch":
self.turnFastEpochBegin = getConfigListEntry(_("Begin time"), currLnb.fastTurningBegin)
self.turnFastEpochEnd = getConfigListEntry(_("End time"), currLnb.fastTurningEnd)
self.list.append(self.turnFastEpochBegin)
self.list.append(self.turnFastEpochEnd)
else:
if currLnb.powerMeasurement.value:
currLnb.powerMeasurement.value = False
currLnb.powerMeasurement.save()
self.advancedUsalsEntry = getConfigListEntry(_("Use USALS for this sat"), Sat.usals)
if lnbnum < 65:
self.list.append(self.advancedUsalsEntry)
if Sat.usals.value:
self.list.append(getConfigListEntry(_("Longitude"), currLnb.longitude))
self.list.append(getConfigListEntry(" ", currLnb.longitudeOrientation))
self.list.append(getConfigListEntry(_("Latitude"), currLnb.latitude))
self.list.append(getConfigListEntry(" ", currLnb.latitudeOrientation))
else:
self.list.append(getConfigListEntry(_("Stored position"), Sat.rotorposition))
if not hasattr(self, 'additionalMotorOptions'):
self.additionalMotorOptions = ConfigYesNo(False)
self.showAdditionalMotorOptions = getConfigListEntry(_("Extra motor options"), self.additionalMotorOptions)
self.list.append(self.showAdditionalMotorOptions)
if self.additionalMotorOptions.value:
self.list.append(getConfigListEntry(" " + _("Horizontal turning speed") + " [" + chr(176) + "/sec]", currLnb.turningspeedH))
self.list.append(getConfigListEntry(" " + _("Vertical turning speed") + " [" + chr(176) + "/sec]", currLnb.turningspeedV))
self.list.append(getConfigListEntry(" " + _("Turning step size") + " [" + chr(176) + "]", currLnb.tuningstepsize))
self.list.append(getConfigListEntry(" " + _("Max memory positions"), currLnb.rotorPositions))
def createSetup(self):
self.list = [ ]
self.multiType = None
self.configMode = None
self.diseqcModeEntry = None
self.advancedSatsEntry = None
self.advancedLnbsEntry = None
self.advancedDiseqcMode = None
self.advancedUsalsEntry = None
self.advancedLof = None
self.advancedPowerMeasurement = None
self.turningSpeed = None
self.turnFastEpochBegin = None
self.turnFastEpochEnd = None
self.toneburst = None
self.committedDiseqcCommand = None
self.uncommittedDiseqcCommand = None
self.commandOrder = None
self.cableScanType = None
self.cableConfigScanDetails = None
self.have_advanced = False
self.advancedUnicable = None
self.advancedFormat = None
self.advancedPosition = None
self.advancedType = None
self.advancedManufacturer = None
self.advancedSCR = None
self.advancedConnected = None
self.showAdditionalMotorOptions = None
self.selectSatsEntry = None
self.advancedSelectSatsEntry = None
self.singleSatEntry = None
self.terrestrialRegionsEntry = None
self.cableRegionsEntry = None
if not hasattr(self, "terrestrialCountriesEntry"):
self.terrestrialCountriesEntry = None
if not hasattr(self, "cableCountriesEntry"):
self.cableCountriesEntry = None
self.toneamplitude = None
self.scpc = None
self.forcelnbpower = None
self.forcetoneburst = None
if self.nim.isMultiType():
multiType = self.nimConfig.multiType
self.multiType = getConfigListEntry(_("Tuner type"), multiType)
self.list.append(self.multiType)
if self.nim.isCompatible("DVB-S"):
self.configMode = getConfigListEntry(_("Configuration mode"), self.nimConfig.configMode)
self.list.append(self.configMode)
if self.nimConfig.configMode.value == "simple": #simple setup
self.diseqcModeEntry = getConfigListEntry(pgettext("Satellite configuration mode", "Mode"), self.nimConfig.diseqcMode)
self.list.append(self.diseqcModeEntry)
if self.nimConfig.diseqcMode.value in ("single", "toneburst_a_b", "diseqc_a_b", "diseqc_a_b_c_d"):
self.createSimpleSetup(self.list, self.nimConfig.diseqcMode.value)
if self.nimConfig.diseqcMode.value in ("positioner", "positioner_select"):
self.createPositionerSetup(self.list)
elif self.nimConfig.configMode.value == "equal":
choices = []
nimlist = nimmanager.canEqualTo(self.nim.slot)
for id in nimlist:
choices.append((str(id), nimmanager.getNimDescription(id)))
self.nimConfig.connectedTo.setChoices(choices)
self.list.append(getConfigListEntry(_("Tuner"), self.nimConfig.connectedTo))
elif self.nimConfig.configMode.value == "satposdepends":
choices = []
nimlist = nimmanager.canDependOn(self.nim.slot)
for id in nimlist:
choices.append((str(id), nimmanager.getNimDescription(id)))
self.nimConfig.connectedTo.setChoices(choices)
self.list.append(getConfigListEntry(_("Tuner"), self.nimConfig.connectedTo))
elif self.nimConfig.configMode.value == "loopthrough_internal":
choices = []
print "internal connectable to:", nimmanager.canInternalConnectTo(self.slotid)
connectable = nimmanager.canInternalConnectTo(self.slotid)
for id in connectable:
choices.append((str(id), nimmanager.getNimDescription(id)))
self.nimConfig.connectedTo.setChoices(choices)
self.list.append(getConfigListEntry(_("Internal connected to"), self.nimConfig.connectedTo))
elif self.nimConfig.configMode.value == "loopthrough_external":
choices = []
print "external connectable to:", nimmanager.canExternalConnectTo(self.slotid)
connectable = nimmanager.canExternalConnectTo(self.slotid)
for id in connectable:
choices.append((str(id), nimmanager.getNimDescription(id)))
self.nimConfig.connectedTo.setChoices(choices)
self.list.append(getConfigListEntry(_("External connected to"), self.nimConfig.connectedTo))
elif self.nimConfig.configMode.value == "nothing":
pass
elif self.nimConfig.configMode.value == "advanced": # advanced
# SATs
self.advancedSatsEntry = getConfigListEntry(_("Satellite"), self.nimConfig.advanced.sats)
self.list.append(self.advancedSatsEntry)
current_config_sats = self.nimConfig.advanced.sats.value
if current_config_sats in ("3605", "3606"):
self.advancedSelectSatsEntry = getConfigListEntry(_("Press OK to select satellites"), self.nimConfig.pressOKtoList)
self.list.append(self.advancedSelectSatsEntry)
self.fillListWithAdvancedSatEntrys(self.nimConfig.advanced.sat[int(current_config_sats)])
else:
cur_orb_pos = self.nimConfig.advanced.sats.orbital_position
satlist = self.nimConfig.advanced.sat.keys()
if cur_orb_pos is not None:
if cur_orb_pos not in satlist:
cur_orb_pos = satlist[0]
self.fillListWithAdvancedSatEntrys(self.nimConfig.advanced.sat[cur_orb_pos])
self.have_advanced = True
if self.nimConfig.configMode.value != "nothing" and config.usage.setup_level.index >= 2:
if fileExists("/proc/stb/frontend/%d/tone_amplitude" % self.nim.slot):
self.toneamplitude = getConfigListEntry(_("Tone amplitude"), self.nimConfig.toneAmplitude)
self.list.append(self.toneamplitude)
if fileExists("/proc/stb/frontend/%d/use_scpc_optimized_search_range" % self.nim.slot):
self.scpc = getConfigListEntry(_("SCPC optimized search range"), self.nimConfig.scpcSearchRange)
self.list.append(self.scpc)
if SystemInfo["HasForceLNBOn"] and self.nim.isFBCRoot():
self.forcelnbpower = getConfigListEntry(_("Force LNB Power"), config.misc.forceLnbPower)
self.list.append(self.forcelnbpower)
if SystemInfo["HasForceToneburst"] and self.nim.isFBCRoot():
self.forcetoneburst = getConfigListEntry(_("Force ToneBurst"), config.misc.forceToneBurst)
self.list.append(self.forcetoneburst)
elif self.nim.isCompatible("DVB-C"):
self.configMode = getConfigListEntry(_("Configuration mode"), self.nimConfig.configMode)
self.list.append(self.configMode)
if self.nimConfig.configMode.value == "enabled":
self.list.append(getConfigListEntry(_("Network ID"), self.nimConfig.cable.scan_networkid))
self.cableScanType=getConfigListEntry(_("Used service scan type"), self.nimConfig.cable.scan_type)
self.list.append(self.cableScanType)
if self.nimConfig.cable.scan_type.value == "provider":
# country/region tier one
if self.cableCountriesEntry is None:
cablecountrycodelist = nimmanager.getCablesCountrycodeList()
cablecountrycode = nimmanager.getCableCountrycode(self.slotid)
default = cablecountrycode in cablecountrycodelist and cablecountrycode or None
choices = [("all", _("All"))]+sorted([(x, self.countrycodeToCountry(x)) for x in cablecountrycodelist], key=lambda listItem: listItem[1])
self.cableCountries = ConfigSelection(default = default, choices = choices)
self.cableCountriesEntry = getConfigListEntry("Country", self.cableCountries)
self.originalCableRegion = self.nimConfig.cable.scan_provider.value
# country/region tier two
if self.cableCountries.value == "all":
cableNames = [x[0] for x in sorted(sorted(nimmanager.getCablesList(), key=lambda listItem: listItem[0]), key=lambda listItem: self.countrycodeToCountry(listItem[2]))]
else:
cableNames = sorted([x[0] for x in nimmanager.getCablesByCountrycode(self.cableCountries.value)])
default = self.nimConfig.cable.scan_provider.value in cableNames and self.nimConfig.cable.scan_provider.value or None
self.cableRegions = ConfigSelection(default = default, choices = cableNames)
def updateCableProvider(configEntry, extra_args):
extra_args[0].value = configEntry.value
extra_args[0].save()
self.cableRegions.addNotifier(updateCableProvider, extra_args = [self.nimConfig.cable.scan_provider])
self.cableRegionsEntry = getConfigListEntry("Region", self.cableRegions)
self.list.append(self.cableCountriesEntry)
self.list.append(self.cableRegionsEntry)
else:
self.cableConfigScanDetails = getConfigListEntry(_("Config Scan Details"), self.nimConfig.cable.config_scan_details)
self.list.append(self.cableConfigScanDetails)
if self.nimConfig.cable.config_scan_details.value:
if self.nimConfig.cable.scan_type.value == "bands":
# TRANSLATORS: option name, indicating which type of (DVB-C) band should be scanned. The name of the band is printed in '%s'. E.g.: 'Scan EU MID band'
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU VHF I"), self.nimConfig.cable.scan_band_EU_VHF_I))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU MID"), self.nimConfig.cable.scan_band_EU_MID))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU VHF III"), self.nimConfig.cable.scan_band_EU_VHF_III))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU UHF IV"), self.nimConfig.cable.scan_band_EU_UHF_IV))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU UHF V"), self.nimConfig.cable.scan_band_EU_UHF_V))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU SUPER"), self.nimConfig.cable.scan_band_EU_SUPER))
self.list.append(getConfigListEntry(_("Scan %s band") % ("EU HYPER"), self.nimConfig.cable.scan_band_EU_HYPER))
self.list.append(getConfigListEntry(_("Scan %s band") % ("US LOW"), self.nimConfig.cable.scan_band_US_LOW))
self.list.append(getConfigListEntry(_("Scan %s band") % ("US MID"), self.nimConfig.cable.scan_band_US_MID))
self.list.append(getConfigListEntry(_("Scan %s band") % ("US HIGH"), self.nimConfig.cable.scan_band_US_HIGH))
self.list.append(getConfigListEntry(_("Scan %s band") % ("US SUPER"), self.nimConfig.cable.scan_band_US_SUPER))
self.list.append(getConfigListEntry(_("Scan %s band") % ("US HYPER"), self.nimConfig.cable.scan_band_US_HYPER))
else:
self.list.append(getConfigListEntry(_("Frequency scan step size(khz)"), self.nimConfig.cable.scan_frequency_steps))
# TRANSLATORS: option name, indicating which type of (DVB-C) modulation should be scanned. The modulation type is printed in '%s'. E.g.: 'Scan QAM16'
self.list.append(getConfigListEntry(_("Scan %s") % ("QAM16"), self.nimConfig.cable.scan_mod_qam16))
self.list.append(getConfigListEntry(_("Scan %s") % ("QAM32"), self.nimConfig.cable.scan_mod_qam32))
self.list.append(getConfigListEntry(_("Scan %s") % ("QAM64"), self.nimConfig.cable.scan_mod_qam64))
self.list.append(getConfigListEntry(_("Scan %s") % ("QAM128"), self.nimConfig.cable.scan_mod_qam128))
self.list.append(getConfigListEntry(_("Scan %s") % ("QAM256"), self.nimConfig.cable.scan_mod_qam256))
self.list.append(getConfigListEntry(_("Scan %s") % ("SR6900"), self.nimConfig.cable.scan_sr_6900))
self.list.append(getConfigListEntry(_("Scan %s") % ("SR6875"), self.nimConfig.cable.scan_sr_6875))
self.list.append(getConfigListEntry(_("Scan additional SR"), self.nimConfig.cable.scan_sr_ext1))
self.list.append(getConfigListEntry(_("Scan additional SR"), self.nimConfig.cable.scan_sr_ext2))
self.have_advanced = False
elif self.nim.isCompatible("DVB-T"):
self.configMode = getConfigListEntry(_("Configuration mode"), self.nimConfig.configMode)
self.list.append(self.configMode)
self.have_advanced = False
if self.nimConfig.configMode.value == "enabled":
# country/region tier one
if self.terrestrialCountriesEntry is None:
terrestrialcountrycodelist = nimmanager.getTerrestrialsCountrycodeList()
terrestrialcountrycode = nimmanager.getTerrestrialCountrycode(self.slotid)
default = terrestrialcountrycode in terrestrialcountrycodelist and terrestrialcountrycode or None
choices = [("all", _("All"))]+sorted([(x, self.countrycodeToCountry(x)) for x in terrestrialcountrycodelist], key=lambda listItem: listItem[1])
self.terrestrialCountries = ConfigSelection(default = default, choices = choices)
self.terrestrialCountriesEntry = getConfigListEntry("Country", self.terrestrialCountries)
self.originalTerrestrialRegion = self.nimConfig.terrestrial.value
# country/region tier two
if self.terrestrialCountries.value == "all":
terrestrialNames = [x[0] for x in sorted(sorted(nimmanager.getTerrestrialsList(), key=lambda listItem: listItem[0]), key=lambda listItem: self.countrycodeToCountry(listItem[2]))]
else:
terrestrialNames = sorted([x[0] for x in nimmanager.getTerrestrialsByCountrycode(self.terrestrialCountries.value)])
default = self.nimConfig.terrestrial.value in terrestrialNames and self.nimConfig.terrestrial.value or None
self.terrestrialRegions = ConfigSelection(default = default, choices = terrestrialNames)
def updateTerrestrialProvider(configEntry, extra_args):
extra_args[0].value = configEntry.value
extra_args[0].save()
self.terrestrialRegions.addNotifier(updateTerrestrialProvider, extra_args = [self.nimConfig.terrestrial])
self.terrestrialRegionsEntry = getConfigListEntry("Region", self.terrestrialRegions)
self.list.append(self.terrestrialCountriesEntry)
self.list.append(self.terrestrialRegionsEntry)
self.list.append(getConfigListEntry(_("Enable 5V for active antenna"), self.nimConfig.terrestrial_5V))
elif self.nim.isCompatible("ATSC"):
self.configMode = getConfigListEntry(_("Configuration mode"), self.nimConfig.configMode)
self.list.append(self.configMode)
if self.nimConfig.configMode.value == "enabled":
self.list.append(getConfigListEntry(_("ATSC provider"), self.nimConfig.atsc))
self.have_advanced = False
else:
self.have_advanced = False
self["config"].list = self.list
self["config"].l.setList(self.list)
self.setTextKeyYellow()