Exemplo n.º 1
0
    def createConfig(self):
        afterevent = {
            AFTEREVENT.NONE: "nothing",
            AFTEREVENT.WAKEUP: "wakeup",
            AFTEREVENT.WAKEUPTOSTANDBY: "wakeuptostandby",
            AFTEREVENT.STANDBY: "standby",
            AFTEREVENT.DEEPSTANDBY: "deepstandby"
        }[self.timer.afterEvent]

        timertype = {
            TIMERTYPE.NONE: "nothing",
            TIMERTYPE.WAKEUP: "wakeup",
            TIMERTYPE.WAKEUPTOSTANDBY: "wakeuptostandby",
            TIMERTYPE.AUTOSTANDBY: "autostandby",
            TIMERTYPE.AUTODEEPSTANDBY: "autodeepstandby",
            TIMERTYPE.STANDBY: "standby",
            TIMERTYPE.DEEPSTANDBY: "deepstandby",
            TIMERTYPE.REBOOT: "reboot",
            TIMERTYPE.RESTART: "restart"
        }[self.timer.timerType]

        weekday_table = ("mon", "tue", "wed", "thu", "fri", "sat", "sun")
        time_table = [(1, "1"), (3, "3"), (5, "5"), (10, "10"), (15, "15"),
                      (30, "30"), (45, "45"), (60, "60"), (75, "75"),
                      (90, "90"), (105, "105"), (120, "120"), (135, "135"),
                      (150, "150"), (165, "165"), (180, "180"), (195, "195"),
                      (210, "210"), (225, "225"), (240, "240"), (255, "255"),
                      (270, "270"), (285, "285"), (300, "300")]
        traffic_table = [(10, "10"), (50, "50"), (100, "100"), (500, "500"),
                         (1000, "1000")]

        # calculate default values
        day = []
        weekday = 0
        for x in (0, 1, 2, 3, 4, 5, 6):
            day.append(0)
        if self.timer.repeated:  # repeated
            type = "repeated"
            if self.timer.repeated == 31:  # Mon-Fri
                repeated = "weekdays"
            elif self.timer.repeated == 127:  # daily
                repeated = "daily"
            else:
                flags = self.timer.repeated
                repeated = "user"
                count = 0
                for x in (0, 1, 2, 3, 4, 5, 6):
                    if flags == 1:  # weekly
                        print "Set to weekday " + str(x)
                        weekday = x
                    if flags & 1 == 1:  # set user defined flags
                        day[x] = 1
                        count += 1
                    else:
                        day[x] = 0
                    flags >>= 1
                if count == 1:
                    repeated = "weekly"
        else:  # once
            type = "once"
            repeated = None
            weekday = int(strftime("%u", localtime(self.timer.begin))) - 1
            day[weekday] = 1

        if SystemInfo["DeepstandbySupport"]:
            shutdownString = _("go to deep standby")
        else:
            shutdownString = _("shut down")
        self.timerentry_timertype = ConfigSelection(choices=[
            ("nothing", _("do nothing")), ("wakeup", _("wakeup")),
            ("wakeuptostandby", _("wakeup to standby")),
            ("autostandby", _("auto standby")),
            ("autodeepstandby", _("auto deepstandby")),
            ("standby", _("go to standby")), ("deepstandby", shutdownString),
            ("reboot", _("reboot system")), ("restart", _("restart GUI"))
        ],
                                                    default=timertype)
        self.timerentry_afterevent = ConfigSelection(choices=[
            ("nothing", _("do nothing")), ("wakeup", _("wakeup")),
            ("wakeuptostandby", _("wakeup to standby")),
            ("standby", _("go to standby")), ("deepstandby", shutdownString)
        ],
                                                     default=afterevent)
        self.timerentry_type = ConfigSelection(choices=[("once", _("once")),
                                                        ("repeated",
                                                         _("repeated"))],
                                               default=type)

        self.timerentry_repeated = ConfigSelection(
            default=repeated,
            choices=[("daily", _("daily")), ("weekly", _("weekly")),
                     ("weekdays", _("Mon-Fri")), ("user", _("user defined"))])
        self.timerrntry_autosleepdelay = ConfigSelection(
            choices=time_table, default=self.timer.autosleepdelay)
        self.timerentry_autosleeprepeat = ConfigSelection(
            choices=[("once", _("once")), ("repeated", _("repeated"))],
            default=self.timer.autosleeprepeat)
        self.timerrntry_autosleepinstandbyonly = ConfigSelection(
            choices=[("yes", _("only in Standby")),
                     ("no", _("Standard (always)")),
                     ("noquery", _("without Query"))],
            default=self.timer.autosleepinstandbyonly)
        self.timerrntry_autosleepwindow = ConfigSelection(
            choices=[("yes", _("Yes")), ("no", _("No"))],
            default=self.timer.autosleepwindow)
        self.timerrntry_autosleepbegin = ConfigClock(
            default=self.timer.autosleepbegin)
        self.timerrntry_autosleepend = ConfigClock(
            default=self.timer.autosleepend)

        self.timerentry_date = ConfigDateTime(
            default=self.timer.begin,
            formatstring=config.usage.date.full.value,
            increment=86400)
        self.timerentry_starttime = ConfigClock(default=self.timer.begin)
        self.timerentry_endtime = ConfigClock(default=self.timer.end)
        self.timerentry_showendtime = ConfigSelection(
            default=(((self.timer.end - self.timer.begin) / 60) > 4),
            choices=[(True, _("yes")), (False, _("no"))])

        self.timerentry_repeatedbegindate = ConfigDateTime(
            default=self.timer.repeatedbegindate,
            formatstring=config.usage.date.full.value,
            increment=86400)

        self.timerentry_weekday = ConfigSelection(
            default=weekday_table[weekday],
            choices=[("mon", _("Monday")), ("tue", _("Tuesday")),
                     ("wed", _("Wednesday")), ("thu", _("Thursday")),
                     ("fri", _("Friday")), ("sat", _("Saturday")),
                     ("sun", _("Sunday"))])

        self.timerentry_day = ConfigSubList()
        for x in (0, 1, 2, 3, 4, 5, 6):
            self.timerentry_day.append(ConfigYesNo(default=day[x]))

        self.timerrntry_showExtended = ConfigSelection(
            default=(self.timer.nettraffic == "yes"
                     or self.timer.netip == "yes"),
            choices=[(True, _("yes")), (False, _("no"))])
        self.timerrntry_nettraffic = ConfigSelection(
            choices=[("yes", _("Yes")), ("no", _("No"))],
            default=self.timer.nettraffic)
        self.timerrntry_trafficlimit = ConfigSelection(
            choices=traffic_table, default=self.timer.trafficlimit)
        self.timerrntry_netip = ConfigSelection(choices=[("yes", _("Yes")),
                                                         ("no", _("No"))],
                                                default=self.timer.netip)
        self.timerrntry_ipadress = self.timer.ipadress.split(',')
        self.ipcount = ConfigSelectionNumber(default=len(
            self.timerrntry_ipadress),
                                             stepwidth=1,
                                             min=1,
                                             max=5)
        self.ipadressEntry = ConfigSubList()
        for x in (0, 1, 2, 3, 4, 5):
            try:
                self.ipadressEntry.append(
                    ConfigIP(default=[
                        int(n) for n in self.timerrntry_ipadress[x].split('.')
                    ] or [0, 0, 0, 0]))
            except:
                self.ipadressEntry.append(ConfigIP(default=[0, 0, 0, 0]))
Exemplo n.º 2
0
def InitOsd():
    SystemInfo["CanChange3DOsd"] = (access('/proc/stb/fb/3dmode', R_OK)
                                    or access('/proc/stb/fb/primary/3d',
                                              R_OK)) and True or False

    config.osd.dst_left = ConfigSelectionNumber(default=0,
                                                stepwidth=1,
                                                min=0,
                                                max=720,
                                                wraparound=False)
    config.osd.dst_width = ConfigSelectionNumber(default=720,
                                                 stepwidth=1,
                                                 min=0,
                                                 max=720,
                                                 wraparound=False)
    config.osd.dst_top = ConfigSelectionNumber(default=0,
                                               stepwidth=1,
                                               min=0,
                                               max=576,
                                               wraparound=False)
    config.osd.dst_height = ConfigSelectionNumber(default=576,
                                                  stepwidth=1,
                                                  min=0,
                                                  max=576,
                                                  wraparound=False)
    config.osd.alpha = ConfigSelectionNumber(default=255,
                                             stepwidth=1,
                                             min=0,
                                             max=255,
                                             wraparound=False)
    config.av.osd_alpha = NoSave(ConfigNumber(default=255))
    config.osd.threeDmode = ConfigSelection(
        [("off", _("Off")), ("auto", _("Auto")),
         ("sidebyside", _("Side by Side")),
         ("topandbottom", _("Top and Bottom"))], "auto")
    config.osd.threeDznorm = ConfigSlider(default=50,
                                          increment=1,
                                          limits=(0, 100))
    config.osd.show3dextensions = ConfigYesNo(default=False)

    def set3DMode(configElement):
        if SystemInfo["CanChange3DOsd"] and getBoxType() not in ('spycat'):
            print('[UserInterfacePositioner] Setting 3D mode:',
                  configElement.value)
            file3d = fileCheck('/proc/stb/fb/3dmode') or fileCheck(
                '/proc/stb/fb/primary/3d')
            f = open(file3d, "w")
            f.write(configElement.value)
            f.close()

    config.osd.threeDmode.addNotifier(set3DMode)

    def set3DZnorm(configElement):
        if SystemInfo["CanChange3DOsd"] and getBoxType() not in ('spycat'):
            print('[UserInterfacePositioner] Setting 3D depth:',
                  configElement.value)
            f = open("/proc/stb/fb/znorm", "w")
            f.write('%d' % int(configElement.value))
            f.close()

    config.osd.threeDznorm.addNotifier(set3DZnorm)
Exemplo n.º 3
0
from enigma import setAnimation_current, setAnimation_speed

# default = slide to left
g_default = {
    "current": 0,
    "speed": 20,
}
g_max_speed = 30

g_animation_paused = False
g_orig_show = None
g_orig_doClose = None

config.misc.window_animation_default = ConfigNumber(
    default=g_default["current"])
config.misc.window_animation_speed = ConfigSelectionNumber(
    1, g_max_speed, 1, default=g_default["speed"])


class AnimationSetupConfig(ConfigListScreen, Screen):
    skin = """
		<screen position="center,center" size="600,140" title="Animation Settings">
			<widget name="config" position="0,0" size="600,100" scrollbarMode="showOnDemand" />

			<ePixmap pixmap="skin_default/buttons/red.png" position="0,100" size="140,40" alphatest="on" />
			<ePixmap pixmap="skin_default/buttons/green.png" position="140,100" size="140,40" alphatest="on" />
			<ePixmap pixmap="skin_default/buttons/yellow.png" position="280,100" size="140,40" alphatest="on" />

			<widget source="key_red" render="Label" position="0,100" zPosition="1" size="140,40" font="Regular;20" halign="center" valign="center" foregroundColor="#ffffff" backgroundColor="#9f1313" transparent="1" />
			<widget source="key_green" render="Label" position="140,100" zPosition="1" size="140,40" font="Regular;20" halign="center" valign="center" foregroundColor="#ffffff" backgroundColor="#1f771f" transparent="1" />
			<widget source="key_yellow" render="Label" position="280,100" zPosition="1" size="140,40" font="Regular;20" halign="center" valign="center" foregroundColor="#ffffff" backgroundColor="#a08500" transparent="1" />
		</screen>
Exemplo n.º 4
0
from Components.config import config, ConfigSubsection, ConfigYesNo, ConfigSelection, ConfigSelectionNumber

from enigma import eEPGCache

# Plugin internal
from Plugins.Extensions.InfoBarTunerState.__init__ import _
from Plugins.Extensions.InfoBarTunerState.PluginBase import PluginBase
from Plugins.Extensions.InfoBarTunerState.Helper import getTunerByPlayableService, getNumber, getChannel
from Plugins.Extensions.InfoBarTunerState.Logger import log

# Config options
event_choices = [("start", _("Start record")), ("end", _("End record")),
                 ("startend", _("Start / End record"))]
config.infobartunerstate.plugin_records = ConfigSubsection()
config.infobartunerstate.plugin_records.enabled = ConfigYesNo(default=True)
config.infobartunerstate.plugin_records.number_finished_records = ConfigSelectionNumber(
    0, 10, 1, default=3)
config.infobartunerstate.plugin_records.finished_hours = ConfigSelectionNumber(
    0, 1000, 1, default=0)
config.infobartunerstate.plugin_records.show_events = ConfigSelection(
    default="startend", choices=event_choices)


def getTimerID(timer):
    return 'record %x %s %x' % (id(timer), timer.name, int(timer.eit or 0))


def getTimer(id):
    from NavigationInstance import instance
    if instance is not None:
        for timer in (instance.RecordTimer.timer_list +
                      instance.RecordTimer.processed_timers):
Exemplo n.º 5
0
                                      ("800000", "800 Kbits"),
                                      ("900000", "900 Kbits"),
                                      ("1000000", "1 Mbits")])
    config.plugins.transcodingsetup.bitrate = choice
    choice = ConfigSelection(default="50000",
                             choices=[("-1", "Auto"), ("23976", "23.976 fps"),
                                      ("24000", "24 fps"), ("25000", "25 fps"),
                                      ("29970", "29.970 fps"),
                                      ("30000", "30 fps"), ("50000", "50 fps"),
                                      ("59940", "59.940 fps"),
                                      ("60000", "60 fps")])
    config.plugins.transcodingsetup.framerate = choice
else:
    choice = ConfigSelectionNumber(min=100000,
                                   max=10000000,
                                   stepwidth=100000,
                                   default=400000,
                                   wraparound=True)
    config.plugins.transcodingsetup.bitrate = choice
    choice = ConfigSelection(default="50000",
                             choices=[("23976", "23.976 fps"),
                                      ("24000", "24 fps"), ("25000", "25 fps"),
                                      ("29970", "29.970 fps"),
                                      ("30000", "30 fps"), ("50000", "50 fps"),
                                      ("59940", "59.940 fps"),
                                      ("60000", "60 fps")])
    config.plugins.transcodingsetup.framerate = choice
    choice = ConfigSelection(default="854x480",
                             choices=[("854x480", _("480p")),
                                      ("768x576", _("576p")),
                                      ("1280x720", _("720p")),
Exemplo n.º 6
0
    default="partial",
    choices=[("partial", _("partial match")),
             ("partialdes", _("partial description")),
             ("exact", _("exact match")), ("start", _("title starts with"))])
config.plugins.epgsearch.search_case = ConfigSelection(
    default="insensitive",
    choices=[("insensitive", _("case-insensitive search")),
             ("sensitive", _("case-sensitive search"))])
allowShowOrbital = True
config.plugins.epgsearch.showorbital = ConfigYesNo(default=allowShowOrbital)
config.plugins.epgsearch.history = ConfigSet(choices=[])
# XXX: configtext is more flexible but we cannot use this for a (not yet created) gui config
config.plugins.epgsearch.encoding = ConfigSelection(
    choices=['UTF-8', 'ISO8859-15'], default='UTF-8')
config.plugins.epgsearch.history_length = ConfigSelectionNumber(0,
                                                                50,
                                                                1,
                                                                default=10)
config.plugins.epgsearch.add_search_to_epg = ConfigYesNo(default=True)

orbposDisabled = 3600


def getNamespaces(namespaces):
    lamedbServices = eServiceReference("1:7:1:0:0:0:0:0:0:0:" + " || ".join(
        map(lambda x: '(satellitePosition == %d)' % (x >> 16), namespaces)))
    hasNamespaces = set()
    if not namespaces:
        return hasNamespaces
    serviceHandler = eServiceCenter.getInstance()
    servicelist = serviceHandler.list(lamedbServices)
    if servicelist is not None:
Exemplo n.º 7
0
def InitAVSwitch():
    config.av = ConfigSubsection()
    if getBoxType() == "vuduo" or getBoxBrand() == "ixuss":
        config.av.yuvenabled = ConfigBoolean(default=False)
    else:
        config.av.yuvenabled = ConfigBoolean(default=True)
    colorformat_choices = {"cvbs": _("CVBS")}

    # when YUV, Scart or S-Video is not support by HW, don't let the user select it
    if SystemInfo["HasYPbPr"]:
        colorformat_choices["yuv"] = _("YPbPr")
    if SystemInfo["HasScart"]:
        colorformat_choices["rgb"] = _("RGB")
    if SystemInfo["HasSVideo"]:
        colorformat_choices["svideo"] = _("S-Video")

    config.av.colorformat = ConfigSelection(choices=colorformat_choices,
                                            default="cvbs")
    config.av.aspectratio = ConfigSelection(choices={
        "4_3_letterbox":
        _("4:3 Letterbox"),
        "4_3_panscan":
        _("4:3 PanScan"),
        "16_9":
        _("16:9"),
        "16_9_always":
        _("16:9 always"),
        "16_10_letterbox":
        _("16:10 Letterbox"),
        "16_10_panscan":
        _("16:10 PanScan"),
        "16_9_letterbox":
        _("16:9 Letterbox")
    },
                                            default="16_9")
    config.av.aspect = ConfigSelection(choices={
        "4_3": _("4:3"),
        "16_9": _("16:9"),
        "16_10": _("16:10"),
        "auto": _("Automatic")
    },
                                       default="auto")
    policy2_choices = {
        # TRANSLATORS: (aspect ratio policy: black bars on top/bottom) in doubt, keep english term.
        "letterbox": _("Letterbox"),
        # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
        "panscan": _("Pan&scan"),
        # TRANSLATORS: (aspect ratio policy: scale as close to fullscreen as possible)
        "scale": _("Just scale")
    }
    try:
        if "full" in open("/proc/stb/video/policy2_choices").read():
            # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if the content aspect ratio does not match the screen ratio)
            policy2_choices.update({"full": _("Full screen")})
    except:
        pass
    try:
        if "auto" in open("/proc/stb/video/policy2_choices").read():
            # TRANSLATORS: (aspect ratio policy: automatically select the best aspect ratio mode)
            policy2_choices.update({"auto": _("Auto")})
    except:
        pass
    config.av.policy_169 = ConfigSelection(choices=policy2_choices,
                                           default="scale")
    policy_choices = {
        # TRANSLATORS: (aspect ratio policy: black bars on left/right) in doubt, keep english term.
        "pillarbox": _("Pillarbox"),
        # TRANSLATORS: (aspect ratio policy: cropped content on left/right) in doubt, keep english term
        "panscan": _("Pan&scan"),
        # TRANSLATORS: (aspect ratio policy: scale as close to fullscreen as possible)
        "scale": _("Just scale")
    }
    try:
        if "nonlinear" in open("/proc/stb/video/policy_choices").read():
            # TRANSLATORS: (aspect ratio policy: display as fullscreen, with stretching the left/right)
            policy_choices.update({"nonlinear": _("Nonlinear")})
    except:
        pass
    try:
        if "full" in open("/proc/stb/video/policy_choices").read():
            # TRANSLATORS: (aspect ratio policy: display as fullscreen, even if the content aspect ratio does not match the screen ratio)
            policy_choices.update({"full": _("Full screen")})
    except:
        pass
    try:
        if "auto" in open("/proc/stb/video/policy_choices").read():
            # TRANSLATORS: (aspect ratio policy: automatically select the best aspect ratio mode)
            policy_choices.update({"auto": _("Auto")})
    except:
        pass
    config.av.policy_43 = ConfigSelection(choices=policy_choices,
                                          default="scale")
    config.av.tvsystem = ConfigSelection(choices={
        "pal": _("PAL"),
        "ntsc": _("NTSC"),
        "multinorm": _("multinorm")
    },
                                         default="pal")
    config.av.wss = ConfigEnableDisable(default=True)
    config.av.generalAC3delay = ConfigSelectionNumber(-1000,
                                                      1000,
                                                      5,
                                                      default=0)
    config.av.generalPCMdelay = ConfigSelectionNumber(-1000,
                                                      1000,
                                                      5,
                                                      default=0)
    config.av.vcrswitch = ConfigEnableDisable(default=False)

    iAVSwitch = AVSwitch()

    def setColorFormat(configElement):
        if getBoxType() == "et6x00":
            map = {"cvbs": 3, "rgb": 3, "svideo": 2, "yuv": 3}
        elif SystemInfo["GigaBlueQuad"] or getBoxType().startswith('et'):
            map = {"cvbs": 0, "rgb": 3, "svideo": 2, "yuv": 3}
        else:
            map = {"cvbs": 0, "rgb": 1, "svideo": 2, "yuv": 3}
        iAVSwitch.setColorFormat(map[configElement.value])

    def setAspectRatio(configElement):
        map = {
            "4_3_letterbox": 0,
            "4_3_panscan": 1,
            "16_9": 2,
            "16_9_always": 3,
            "16_10_letterbox": 4,
            "16_10_panscan": 5,
            "16_9_letterbox": 6
        }
        iAVSwitch.setAspectRatio(map[configElement.value])

    def setSystem(configElement):
        map = {"pal": 0, "ntsc": 1, "multinorm": 2}
        iAVSwitch.setSystem(map[configElement.value])

    def setWSS(configElement):
        iAVSwitch.setAspectWSS()

    # this will call the "setup-val" initial
    config.av.colorformat.addNotifier(setColorFormat)
    config.av.aspectratio.addNotifier(setAspectRatio)
    config.av.tvsystem.addNotifier(setSystem)
    config.av.wss.addNotifier(setWSS)

    iAVSwitch.setInput("ENCODER")  # init on startup
    if SystemInfo["GigaBlueQuad"] or getBoxType() in (
            "et5x00", "et6x00", "ixussone", "ixusszero", "axodin", "axodinc",
            "starsatlx", "galaxym6", "geniuse3hd", "evoe3hd", "axase3",
            "axase3c", "optimussos1", "optimussos2", "gb800seplus",
            "gb800ueplus", "gbultrase", "gbultraue", "gbultraueh",
            "twinboxlcd"):
        detected = False
    else:
        detected = eAVSwitch.getInstance().haveScartSwitch()

    SystemInfo["ScartSwitch"] = detected

    if SystemInfo["CanDownmixAC3"]:

        def setAC3Downmix(configElement):
            if SystemInfo["DreamBoxAudio"]:
                open("/proc/stb/audio/ac3", "w").write(configElement.value)
            else:
                open("/proc/stb/audio/ac3",
                     "w").write(configElement.value and "downmix"
                                or "passthrough")

        if SystemInfo["DreamBoxAudio"]:
            choice_list = [("downmix", _("Downmix")),
                           ("passthrough", _("Passthrough")),
                           ("multichannel", _("convert to multi-channel PCM")),
                           ("hdmi_best", _("use best / controlled by HDMI"))]
            config.av.downmix_ac3 = ConfigSelection(choices=choice_list,
                                                    default="downmix")
        else:
            config.av.downmix_ac3 = ConfigYesNo(default=True)
        config.av.downmix_ac3.addNotifier(setAC3Downmix)

    if SystemInfo["CanAC3plusTranscode"]:

        def setAC3plusTranscode(configElement):
            open("/proc/stb/audio/ac3plus", "w").write(configElement.value)

        if SystemInfo["DreamBoxAudio"]:
            choice_list = [("use_hdmi_caps", _("controlled by HDMI")),
                           ("force_ac3", _("convert to AC3")),
                           ("multichannel", _("convert to multi-channel PCM")),
                           ("hdmi_best", _("use best / controlled by HDMI")),
                           ("force_ddp", _("force AC3plus"))]
            config.av.transcodeac3plus = ConfigSelection(choices=choice_list,
                                                         default="force_ac3")
        elif SystemInfo["GigaBlueAudio"]:
            choice_list = [("downmix", _("Downmix")),
                           ("passthrough", _("Passthrough")),
                           ("force_ac3", _("convert to AC3")),
                           ("multichannel", _("convert to multi-channel PCM")),
                           ("force_dts", _("convert to DTS"))]
            config.av.transcodeac3plus = ConfigSelection(choices=choice_list,
                                                         default="force_ac3")
        else:
            choice_list = [("use_hdmi_caps", _("controlled by HDMI")),
                           ("force_ac3", _("convert to AC3"))]
            config.av.transcodeac3plus = ConfigSelection(choices=choice_list,
                                                         default="force_ac3")
        config.av.transcodeac3plus.addNotifier(setAC3plusTranscode)

    if SystemInfo["CanDownmixDTS"]:

        def setDTSDownmix(configElement):
            open("/proc/stb/audio/dts",
                 "w").write(configElement.value and "downmix" or "passthrough")

        config.av.downmix_dts = ConfigYesNo(default=True)
        config.av.downmix_dts.addNotifier(setDTSDownmix)

    if SystemInfo["CanDTSHD"]:

        def setDTSHD(configElement):
            open("/proc/stb/audio/dtshd", "w").write(configElement.value)

        if SystemInfo["DreamBoxDTSAudio"]:
            choice_list = [("use_hdmi_caps", _("controlled by HDMI")),
                           ("force_dts", _("convert to DTS"))]
            config.av.dtshd = ConfigSelection(choices=choice_list,
                                              default="use_hdmi_caps")
        else:
            choice_list = [("downmix", _("Downmix")),
                           ("force_dts", _("convert to DTS")),
                           ("use_hdmi_caps", _("controlled by HDMI")),
                           ("multichannel", _("convert to multi-channel PCM")),
                           ("hdmi_best", _("use best / controlled by HDMI"))]
            config.av.dtshd = ConfigSelection(choices=choice_list,
                                              default="downmix")
        config.av.dtshd.addNotifier(setDTSHD)

    if SystemInfo["CanWMAPRO"]:

        def setWMAPRO(configElement):
            open("/proc/stb/audio/wmapro", "w").write(configElement.value)

        choice_list = [("downmix", _("Downmix")),
                       ("passthrough", _("Passthrough")),
                       ("multichannel", _("convert to multi-channel PCM")),
                       ("hdmi_best", _("use best / controlled by HDMI"))]
        config.av.wmapro = ConfigSelection(choices=choice_list,
                                           default="downmix")
        config.av.wmapro.addNotifier(setWMAPRO)

    if SystemInfo["CanDownmixAAC"]:

        def setAACDownmix(configElement):
            if SystemInfo["DreamBoxAudio"] or SystemInfo["GigaBlueAudio"]:
                open("/proc/stb/audio/aac", "w").write(configElement.value)
            else:
                open("/proc/stb/audio/aac",
                     "w").write(configElement.value and "downmix"
                                or "passthrough")

        if SystemInfo["DreamBoxAudio"]:
            choice_list = [("downmix", _("Downmix")),
                           ("passthrough", _("Passthrough")),
                           ("multichannel", _("convert to multi-channel PCM")),
                           ("hdmi_best", _("use best / controlled by HDMI"))]
            config.av.downmix_aac = ConfigSelection(choices=choice_list,
                                                    default="downmix")
        elif SystemInfo["GigaBlueAudio"]:
            choice_list = [("downmix", _("Downmix")),
                           ("passthrough", _("Passthrough")),
                           ("multichannel", _("convert to multi-channel PCM")),
                           ("force_ac3", _("convert to AC3")),
                           ("force_dts", _("convert to DTS")),
                           ("use_hdmi_cacenter", _("use_hdmi_cacenter")),
                           ("wide", _("wide")), ("extrawide", _("extrawide"))]
            config.av.downmix_aac = ConfigSelection(choices=choice_list,
                                                    default="downmix")
        else:
            config.av.downmix_aac = ConfigYesNo(default=True)
        config.av.downmix_aac.addNotifier(setAACDownmix)

    if SystemInfo["CanDownmixAACPlus"]:

        def setAACDownmixPlus(configElement):
            open("/proc/stb/audio/aacplus", "w").write(configElement.value)

        choice_list = [("downmix", _("Downmix")),
                       ("passthrough", _("Passthrough")),
                       ("multichannel", _("convert to multi-channel PCM")),
                       ("force_ac3", _("convert to AC3")),
                       ("force_dts", _("convert to DTS")),
                       ("use_hdmi_cacenter", _("use_hdmi_cacenter")),
                       ("wide", _("wide")), ("extrawide", _("extrawide"))]
        config.av.downmix_aacplus = ConfigSelection(choices=choice_list,
                                                    default="downmix")
        config.av.downmix_aacplus.addNotifier(setAACDownmixPlus)

    if SystemInfo["CanAACTranscode"]:

        def setAACTranscode(configElement):
            open("/proc/stb/audio/aac_transcode",
                 "w").write(configElement.value)

        choice_list = [("off", _("off")), ("ac3", _("AC3")), ("dts", _("DTS"))]
        config.av.transcodeaac = ConfigSelection(choices=choice_list,
                                                 default="off")
        config.av.transcodeaac.addNotifier(setAACTranscode)
    else:
        config.av.transcodeaac = ConfigNothing()

    if SystemInfo["CanBTAudio"]:

        def setBTAudio(configElement):
            open("/proc/stb/audio/btaudio", "w").write(configElement.value)

        choice_list = [("off", _("off")), ("on", _("on"))]
        config.av.btaudio = ConfigSelection(choices=choice_list, default="off")
        config.av.btaudio.addNotifier(setBTAudio)
    else:
        config.av.btaudio = ConfigNothing()

    if SystemInfo["CanBTAudioDelay"]:

        def setBTAudioDelay(configElement):
            open("/proc/stb/audio/btaudio",
                 "w").write(format(configElement.value * 90))

        config.av.btaudiodelay = ConfigSelectionNumber(-1000,
                                                       1000,
                                                       5,
                                                       default=0)
        config.av.btaudiodelay.addNotifier(setBTAudioDelay)
    else:
        config.av.btaudiodelay = ConfigNothing()

    if SystemInfo["CanChangeOsdAlpha"]:

        def setAlpha(config):
            open("/proc/stb/video/alpha", "w").write(str(config.value))

        config.av.osd_alpha = ConfigSlider(default=255, limits=(0, 255))
        config.av.osd_alpha.addNotifier(setAlpha)

    if SystemInfo["ScalerSharpness"]:

        def setScaler_sharpness(config):
            myval = int(config.value)
            try:
                print("--> setting scaler_sharpness to: %0.8X" % myval)
                open("/proc/stb/vmpeg/0/pep_scaler_sharpness",
                     "w").write("%0.8X" % myval)
                open("/proc/stb/vmpeg/0/pep_apply", "w").write("1")
            except IOError:
                print("[AVSwitch] couldn't write pep_scaler_sharpness")

        if SystemInfo["GigaBlueQuad"]:
            config.av.scaler_sharpness = ConfigSlider(default=5,
                                                      limits=(0, 26))
        else:
            config.av.scaler_sharpness = ConfigSlider(default=13,
                                                      limits=(0, 26))
        config.av.scaler_sharpness.addNotifier(setScaler_sharpness)
    else:
        config.av.scaler_sharpness = NoSave(ConfigNothing())

    if SystemInfo["HasMultichannelPCM"]:

        def setMultichannelPCM(configElement):
            open(SystemInfo["HasMultichannelPCM"],
                 "w").write(configElement.value and "enable" or "disable")

        config.av.multichannel_pcm = ConfigYesNo(default=False)
        config.av.multichannel_pcm.addNotifier(setMultichannelPCM)

    if SystemInfo["HasAutoVolume"]:

        def setAutoVolume(configElement):
            open(SystemInfo["HasAutoVolume"], "w").write(configElement.value)

        config.av.autovolume = ConfigSelection(default="none",
                                               choices=[("none", _("off")),
                                                        ("hdmi", _("HDMI")),
                                                        ("spdif", _("SPDIF")),
                                                        ("dac", _("DAC"))])
        config.av.autovolume.addNotifier(setAutoVolume)

    if SystemInfo["HasAutoVolumeLevel"]:

        def setAutoVolumeLevel(configElement):
            open(SystemInfo["HasAutoVolumeLevel"],
                 "w").write(configElement.value and "enabled" or "disabled")

        config.av.autovolumelevel = ConfigYesNo(default=False)
        config.av.autovolumelevel.addNotifier(setAutoVolumeLevel)

    if SystemInfo["Has3DSurround"]:

        def set3DSurround(configElement):
            open(SystemInfo["Has3DSurround"], "w").write(configElement.value)

        config.av.surround_3d = ConfigSelection(default="none",
                                                choices=[("none", _("off")),
                                                         ("hdmi", _("HDMI")),
                                                         ("spdif", _("SPDIF")),
                                                         ("dac", _("DAC"))])
        config.av.surround_3d.addNotifier(set3DSurround)

    if SystemInfo["Has3DSpeaker"]:

        def set3DSpeaker(configElement):
            open(SystemInfo["Has3DSpeaker"], "w").write(configElement.value)

        config.av.speaker_3d = ConfigSelection(default="center",
                                               choices=[("center",
                                                         _("center")),
                                                        ("wide", _("wide")),
                                                        ("extrawide",
                                                         _("extra wide"))])
        config.av.speaker_3d.addNotifier(set3DSpeaker)

    if SystemInfo["Has3DSurroundSpeaker"]:

        def set3DSurroundSpeaker(configElement):
            open(SystemInfo["Has3DSurroundSpeaker"],
                 "w").write(configElement.value)

        config.av.surround_3d_speaker = ConfigSelection(
            default="disabled",
            choices=[("disabled", _("off")), ("center", _("center")),
                     ("wide", _("wide")), ("extrawide", _("extra wide"))])
        config.av.surround_3d_speaker.addNotifier(set3DSurroundSpeaker)

    if SystemInfo["Has3DSurroundSoftLimiter"]:

        def set3DSurroundSoftLimiter(configElement):
            open(SystemInfo["Has3DSurroundSoftLimiter"],
                 "w").write(configElement.value and "enabled" or "disabled")

        config.av.surround_softlimiter_3d = ConfigYesNo(default=False)
        config.av.surround_softlimiter_3d.addNotifier(set3DSurroundSoftLimiter)

    if SystemInfo["HDMIAudioSource"]:

        def setHDMIAudioSource(configElement):
            open(SystemInfo["HDMIAudioSource"], "w").write(configElement.value)

        config.av.hdmi_audio_source = ConfigSelection(default="pcm",
                                                      choices=[
                                                          ("pcm", _("PCM")),
                                                          ("spdif", _("SPDIF"))
                                                      ])
        config.av.hdmi_audio_source.addNotifier(setHDMIAudioSource)

    def setVolumeStepsize(configElement):
        eDVBVolumecontrol.getInstance().setVolumeSteps(int(
            configElement.value))

    config.av.volume_stepsize = ConfigSelectionNumber(1, 10, 1, default=5)
    config.av.volume_stepsize.addNotifier(setVolumeStepsize)
Exemplo n.º 8
0
config.plugins.epgbackup.show_backuprestore_in_extmenu = ConfigYesNo(
    default=False)
config.plugins.epgbackup.backup_enabled = ConfigYesNo(default=True)
config.plugins.epgbackup.make_backup_after_unsuccess_restore = ConfigYesNo(
    default=True)
config.plugins.epgbackup.callAfterEPGRefresh = ConfigYesNo(default=True)
config.plugins.epgbackup.backupSaveInterval = ConfigSelection(choices=[
    ("-1", _("backup timer disabled")),
    ("30", _("30 minutes")),
    ("60", _("1 hour")),
    ("300", _("6 hours")),
    ("1200", _("1 day")),
],
                                                              default="-1")
config.plugins.epgbackup.show_messages_background = ConfigYesNo(default=True)
config.plugins.epgbackup.filesize_valid = ConfigSelectionNumber(
    min=1, max=20, stepwidth=1, default=3, wraparound=True)
config.plugins.epgbackup.timespan_valid = ConfigNumber(default=7)
config.plugins.epgbackup.showadvancedoptions = NoSave(
    ConfigYesNo(default=False))
config.plugins.epgbackup.epgwrite_wait = ConfigNumber(default=3)
config.plugins.epgbackup.showin_usr_scripts = ConfigYesNo(default=True)
config.plugins.epgbackup.backup_strategy = ConfigSelection(choices=[
    ("youngest_before_biggest", _("Youngest before Biggest"),
     _("The youngest file from the saved backup-files will be restored.\nIf it is older than the current existing EPG-file and the EPG-file isn't valid then the biggest backup-file will be restored."
       )),
    ("biggest_before_youngest", _("Biggest before Youngest"),
     _("The biggest file from the saved backup-files will be restored.\nIf it is smaller than the current existing EPG-file and the EPG-file isn't valid then the youngest backup-file will be restored."
       )),
    ("youngest", _("Only younger"),
     _("The backup-file will only be restored if it is younger than the current existing EPG-file."
       )),
Exemplo n.º 9
0
    default="-1", choices=TAB_CHOICES)
config.plugins.merlinEpgCenter.replaceShowEventView = ConfigSelection(
    default="-1", choices=TAB_CHOICES)
config.plugins.merlinEpgCenter.epgPaths = ConfigSelection(
    default=eEnv.resolve('${datadir}/enigma2/picon_50x30/'),
    choices=[
        (eEnv.resolve('${datadir}/enigma2/picon_50x30/'),
         eEnv.resolve('${datadir}/enigma2/picon_50x30')),
        ('/media/cf/picon_50x30/', '/media/cf/picon_50x30'),
        ('/media/usb/picon_50x30/', '/media/usb/picon_50x30'),
    ])
config.plugins.merlinEpgCenter.showColoredEpgTimes = ConfigYesNo(True)
config.plugins.merlinEpgCenter.searchString = NoSave(ConfigText(default=""))
config.plugins.merlinEpgCenter.searchHistory = ConfigSet(choices=[])
config.plugins.merlinEpgCenter.showInputHelp = ConfigYesNo(True)
config.plugins.merlinEpgCenter.listItemHeight = ConfigSelectionNumber(
    min=0, max=20, stepwidth=2, default=0, wraparound=True)
config.plugins.merlinEpgCenter.listStyle = ConfigSelection(
    default=STYLE_SINGLE_LINE,
    choices=[
        (STYLE_SINGLE_LINE, _("single line style")),
        (STYLE_SHORT_DESCRIPTION, _("with short description")),
    ])
config.plugins.merlinEpgCenter.skin = ConfigText(default="")
config.plugins.merlinEpgCenter.skinSelection = NoSave(
    ConfigSelection(choices=[]))
config.plugins.merlinEpgCenter.limitSearchToBouquetServices = ConfigYesNo(
    False)
config.plugins.merlinEpgCenter.exitOnTvRadioSwitch = ConfigYesNo(False)
config.plugins.merlinEpgCenter.numNextEvents = ConfigSelectionNumber(
    min=0, max=3, stepwidth=1, default=1, wraparound=True)
config.plugins.merlinEpgCenter.showDuration = ConfigYesNo(True)
Exemplo n.º 10
0
def InitRecordingConfig():
    config.recording = ConfigSubsection()
    # actually this is "recordings always have priority". "Yes" does mean: don't ask. The RecordTimer will ask when value is 0.
    config.recording.asktozap = ConfigYesNo(default=True)
    config.recording.margin_before = ConfigSelectionNumber(min=0,
                                                           max=120,
                                                           stepwidth=1,
                                                           default=3,
                                                           wraparound=True)
    config.recording.margin_after = ConfigSelectionNumber(min=0,
                                                          max=120,
                                                          stepwidth=1,
                                                          default=5,
                                                          wraparound=True)
    config.recording.ascii_filenames = ConfigYesNo(default=False)
    config.recording.keep_timers = ConfigSelectionNumber(min=1,
                                                         max=120,
                                                         stepwidth=1,
                                                         default=7,
                                                         wraparound=True)
    config.recording.filename_composition = ConfigSelection(
        default="standard",
        choices=[("standard", _("standard")),
                 ("veryveryshort", _("Very very short filenames - Warning")),
                 ("veryshort", _("Very short filenames")),
                 ("shortwithtime", _("Short filenames with time")),
                 ("short", _("Short filenames")),
                 ("long", _("Long filenames"))])
    config.recording.always_ecm = ConfigYesNo(default=False)
    config.recording.never_decrypt = ConfigYesNo(default=False)
    config.recording.offline_decode_delay = ConfigInteger(default=1000,
                                                          limits=(1, 10000))
    config.recording.ecm_data = ConfigSelection(choices=[
        ("normal", _("normal")),
        ("descrambled+ecm", _("descramble and record ecm")),
        ("scrambled+ecm", _("don't descramble, record ecm"))
    ],
                                                default="normal")
    config.recording.default_timertype = ConfigSelection(choices=[
        ("zap", _("zap")), ("record", _("record")),
        ("zap+record", _("zap and record"))
    ],
                                                         default="record")
    if BoxInfo.getItem("DeepstandbySupport"):
        shutdownString = _("go to deep standby")
    else:
        shutdownString = _("shut down")
    config.recording.default_afterevent = ConfigSelection(choices=[
        ("0", _("do nothing")), ("1", _("go to standby")),
        ("2", shutdownString), ("3", _("auto"))
    ],
                                                          default="3")
    config.recording.include_ait = ConfigYesNo(default=False)
    config.recording.show_rec_symbol_for_rec_types = ConfigSelection(
        choices=[("any", _("any recordings")), ("real", _("real recordings")),
                 ("real_streaming", _("real recordings or streaming")),
                 ("real_pseudo", _("real or pseudo recordings"))],
        default="real_streaming")
    config.recording.warn_box_restart_rec_types = ConfigSelection(
        choices=[("any", _("any recordings")), ("real", _("real recordings")),
                 ("real_streaming", _("real recordings or streaming")),
                 ("real_pseudo", _("real or pseudo recordings"))],
        default="real_streaming")
    config.recording.ask_to_abort_pseudo_rec = ConfigSelection(
        choices=[("ask", _("ask user")),
                 ("abort_no_msg", _("just abort, no message")),
                 ("abort_msg", _("just abort, show message")),
                 ("never_abort", _("never abort"))],
        default="abort_msg")
    config.recording.ask_to_abort_streaming = ConfigSelection(
        choices=[("ask", _("ask user")),
                 ("abort_no_msg", _("just abort, no message")),
                 ("abort_msg", _("just abort, show message")),
                 ("never_abort", _("never abort"))],
        default="abort_msg")
    config.recording.ask_to_abort_pip = ConfigSelection(choices=[
        ("ask", _("ask user")), ("abort_no_msg", _("just abort, no message")),
        ("abort_msg", _("just abort, show message")),
        ("never_abort", _("never abort"))
    ],
                                                        default="abort_msg")
    config.recording.prepare_time = ConfigSelectionNumber(min=20,
                                                          max=120,
                                                          stepwidth=10,
                                                          default=20,
                                                          wraparound=True)
Exemplo n.º 11
0
# Globals
gPushService = None

# Config options
config.pushservice = ConfigSubsection()

config.pushservice.about = ConfigNothing()

config.pushservice.enable = ConfigOnOff(default=True)

config.pushservice.boxname = ConfigText(default="Enigma2", fixed_size=False)
config.pushservice.xmlpath = ConfigText(default="/etc/enigma2/pushservice.xml",
                                        fixed_size=False)

config.pushservice.time = ConfigClock(default=0)
config.pushservice.period = ConfigSelectionNumber(0, 1000, 1, default=24)
config.pushservice.runonboot = ConfigOnOff(default=True)
config.pushservice.bootdelay = ConfigSelectionNumber(5, 1000, 5, default=10)

config.pushservice.push_errors = ConfigOnOff(default=False)


#######################################################
# Plugin configuration
def setup(session, **kwargs):
    try:
        ### For testing only
        import ConfigScreen
        reload(ConfigScreen)
        ###
        session.open(ConfigScreen.ConfigScreen)