def __init__(self, parent=None):
"""
Constructor
"""
# QDialog.__init__(self, parent, Qt.FramelessWindowHint)
QDialog.__init__(self, parent)
self.setupUi(self)
self.nerfModel = Model()
self.dispView = View(None, VIEWER_REFRESH_RATE, CHIN_PARAM)
self.dispView.show()
self.data = []
self.isLogData = False
# Create float_spin for each input channel
self.ctrl_all = []
for (trig_id, name, type, value) in CHOUT_PARAM:
exec interp(
'self.ctrl_#{name} = CtrlChannel(hostDialog=self, name=name, id=trig_id, type=type, value=value)'
)
exec interp(
'self.connect(self.ctrl_#{name}.doubleSpinBox, SIGNAL("editingFinished()"), self.onNewWireIn)'
)
exec interp(
'self.connect(self.ctrl_#{name}.doubleSpinBox, SIGNAL("valueChanged(double)"), self.onNewWireIn)'
)
exec interp('self.ctrl_all.append(self.ctrl_#{name})')
# Timer for pulling data, separated from timer_display
self.timer = QTimer(self)
self.connect(self.timer, SIGNAL("timeout()"), self.onSyncData)
self.timer.start(VIEWER_REFRESH_RATE)
self.on_horizontalSlider_valueChanged(5)
def __init__(self, parent = None):
"""
Constructor
"""
# QDialog.__init__(self, parent, Qt.FramelessWindowHint)
QDialog.__init__(self, parent)
self.setupUi(self)
self.nerfModel = Model()
self.dispView = View(None, NUM_CHANNEL, DISPLAY_SCALING, VIEWER_REFRESH_RATE, \
CHANNEL_COLOR)
self.dispView.show()
self.data = []
self.isLogData = False
self.connect(self.dispView.timer, SIGNAL("timeout()"), self.onCheckMoney)
# self.connect(self, SIGNAL("initRT"), self.on_horizontalSlider_sliderMoved)
# self.emit(SIGNAL("initRT"), 1)
self.on_horizontalSlider_valueChanged(1)
# self.connect(self.doubleSpinBox_0, SIGNAL("editingFinished()"), self.onNewWire00In)
# self.connect(self.doubleSpinBox_0, SIGNAL("valueChanged(double)"), self.onNewWire00In)
#
# self.connect(self.doubleSpinBox_1, SIGNAL("editingFinished()"), self.onNewWire01In)
# self.connect(self.doubleSpinBox_1, SIGNAL("valueChanged(double)"), self.onNewWire01In)
self.connect(self.doubleSpinBox_2, SIGNAL("editingFinished()"), self.onNewWireIn2)
self.connect(self.doubleSpinBox_2, SIGNAL("valueChanged(double)"), self.onNewWireIn2)
self.connect(self.doubleSpinBox_3, SIGNAL("editingFinished()"), self.onNewWireIn3)
self.connect(self.doubleSpinBox_3, SIGNAL("valueChanged(double)"), self.onNewWireIn3)
#
self.connect(self.doubleSpinBox_4, SIGNAL("editingFinished()"), self.onNewWireIn4)
self.connect(self.doubleSpinBox_4, SIGNAL("valueChanged(double)"), self.onNewWireIn4)
self.connect(self.doubleSpinBox_5, SIGNAL("editingFinished()"), self.onNewWireIn5)
self.connect(self.doubleSpinBox_5, SIGNAL("valueChanged(double)"), self.onNewWireIn5)
self.connect(self.doubleSpinBox_6, SIGNAL("editingFinished()"), self.onNewWireIn6)
self.connect(self.doubleSpinBox_6, SIGNAL("valueChanged(double)"), self.onNewWireIn6)
#
# self.connect(self.doubleSpinBox_7, SIGNAL("editingFinished()"), self.onNewWire07In)
# self.connect(self.doubleSpinBox_7, SIGNAL("valueChanged(double)"), self.onNewWire07In)
#
# self.connect(self.doubleSpinBox_8, SIGNAL("editingFinished()"), self.onNewWire08In)
# self.connect(self.doubleSpinBox_8, SIGNAL("valueChanged(double)"), self.onNewWire08In)
#
# self.connect(self.doubleSpinBox_9, SIGNAL("editingFinished()"), self.onNewWire09In)
# self.connect(self.doubleSpinBox_9, SIGNAL("valueChanged(double)"), self.onNewWire09In)
self.connect(self.doubleSpinBox_14, SIGNAL("editingFinished()"), self.onNewWireIn14)
self.connect(self.doubleSpinBox_14, SIGNAL("valueChanged(double)"), self.onNewWireIn14)
self.connect(self.doubleSpinBox_15, SIGNAL("editingFinished()"), self.onNewWireIn15)
self.connect(self.doubleSpinBox_15, SIGNAL("valueChanged(double)"), self.onNewWireIn15)
class User(QDialog, Ui_Dialog):
"""
Class documentation goes here.
"""
def __init__(self, parent=None):
"""
Constructor
"""
# QDialog.__init__(self, parent, Qt.FramelessWindowHint)
QDialog.__init__(self, parent)
self.setupUi(self)
self.nerfModel = Model()
self.dispView = View(None, NUM_CHANNEL, DISPLAY_SCALING, VIEWER_REFRESH_RATE, \
CHANNEL_COLOR)
self.dispView.show()
self.data = []
self.isLogData = False
self.connect(self.dispView.timer, SIGNAL("timeout()"),
self.onCheckMoney)
# self.connect(self, SIGNAL("initRT"), self.on_horizontalSlider_sliderMoved)
# self.emit(SIGNAL("initRT"), 1)
self.on_horizontalSlider_valueChanged(1)
# self.connect(self.doubleSpinBox_0, SIGNAL("editingFinished()"), self.onNewWire00In)
# self.connect(self.doubleSpinBox_0, SIGNAL("valueChanged(double)"), self.onNewWire00In)
#
# self.connect(self.doubleSpinBox_1, SIGNAL("editingFinished()"), self.onNewWire01In)
# self.connect(self.doubleSpinBox_1, SIGNAL("valueChanged(double)"), self.onNewWire01In)
self.connect(self.doubleSpinBox_2, SIGNAL("editingFinished()"),
self.onNewWireIn2)
self.connect(self.doubleSpinBox_2, SIGNAL("valueChanged(double)"),
self.onNewWireIn2)
self.connect(self.doubleSpinBox_3, SIGNAL("editingFinished()"),
self.onNewWireIn3)
self.connect(self.doubleSpinBox_3, SIGNAL("valueChanged(double)"),
self.onNewWireIn3)
#
self.connect(self.doubleSpinBox_4, SIGNAL("editingFinished()"),
self.onNewWireIn4)
self.connect(self.doubleSpinBox_4, SIGNAL("valueChanged(double)"),
self.onNewWireIn4)
self.connect(self.doubleSpinBox_5, SIGNAL("editingFinished()"),
self.onNewWireIn5)
self.connect(self.doubleSpinBox_5, SIGNAL("valueChanged(double)"),
self.onNewWireIn5)
self.connect(self.doubleSpinBox_6, SIGNAL("editingFinished()"),
self.onNewWireIn6)
self.connect(self.doubleSpinBox_6, SIGNAL("valueChanged(double)"),
self.onNewWireIn6)
#
# self.connect(self.doubleSpinBox_7, SIGNAL("editingFinished()"), self.onNewWire07In)
# self.connect(self.doubleSpinBox_7, SIGNAL("valueChanged(double)"), self.onNewWire07In)
#
# self.connect(self.doubleSpinBox_8, SIGNAL("editingFinished()"), self.onNewWire08In)
# self.connect(self.doubleSpinBox_8, SIGNAL("valueChanged(double)"), self.onNewWire08In)
#
# self.connect(self.doubleSpinBox_9, SIGNAL("editingFinished()"), self.onNewWire09In)
# self.connect(self.doubleSpinBox_9, SIGNAL("valueChanged(double)"), self.onNewWire09In)
self.connect(self.doubleSpinBox_14, SIGNAL("editingFinished()"),
self.onNewWireIn14)
self.connect(self.doubleSpinBox_14, SIGNAL("valueChanged(double)"),
self.onNewWireIn14)
self.connect(self.doubleSpinBox_15, SIGNAL("editingFinished()"),
self.onNewWireIn15)
self.connect(self.doubleSpinBox_15, SIGNAL("valueChanged(double)"),
self.onNewWireIn15)
def onCheckMoney(self):
"""
This method is the handler for "WANT MONEY" messages,
"""
newData = [0.0 for ix in range(NUM_CHANNEL)]
for i in xrange(NUM_CHANNEL):
newData[i] = self.nerfModel.ReadFPGA(DATA_OUT_ADDR[i], CH_TYPE[i])
# if i == 3:
# newData[i] = newData[i] / 100
# newData[i] = max(-65535, min(65535, self.nerfModel.ReadFPGA(DATA_OUT_ADDR[i], CH_TYPE[i])))
if i == 2:
print newData[i]
# newSpike = self.nerfModel.ReadPipe(0xA1, 4000) # read ## bytes
# self.dispView.newData(newData, newSpike)
# if (self.isLogData):
# self.data.append(newData)
def onClkRate(self, value):
newHalfCnt = 200 * (10**6) / SAMPLING_RATE / NUM_NEURON / value / 2 / 4
self.nerfModel.SendPara(newVal=newHalfCnt, trigEvent=DATA_EVT_CLKRATE)
# def onNewWireIn(self, evt):
# newWireIn = eval('self.doubleSpinBox_'+str(evt)+u'.value()')
# self.nerfModel.SendPara(newVal = newWireIn, trigEvent = evt)
def onNewWireIn2(self):
newWireIn = eval('self.doubleSpinBox_' + str(2) + u'.value()')
self.nerfModel.SendPara(newVal=newWireIn, trigEvent=2)
def onNewWireIn3(self):
newWireIn = self.doubleSpinBox_3.value()
if SEND_TYPE[3] == 'int32': newWireIn = int(newWireIn)
self.nerfModel.SendPara(newVal=newWireIn, trigEvent=3)
def onNewWireIn4(self):
newWireIn = self.doubleSpinBox_4.value()
if SEND_TYPE[4] == 'int32': newWireIn = int(newWireIn)
self.nerfModel.SendPara(newVal=newWireIn, trigEvent=4)
def onNewWireIn5(self):
newWireIn = self.doubleSpinBox_5.value()
if SEND_TYPE[5] == 'int32': newWireIn = int(newWireIn)
self.nerfModel.SendPara(newVal=newWireIn, trigEvent=5)
def onNewWireIn6(self):
newWireIn = self.doubleSpinBox_6.value()
if SEND_TYPE[6] == 'int32': newWireIn = int(newWireIn)
self.nerfModel.SendPara(newVal=newWireIn, trigEvent=6)
def onNewWireIn14(self):
newWireIn = self.doubleSpinBox_14.value()
self.nerfModel.SendPara(newVal=newWireIn, trigEvent=14)
def onNewWireIn15(self):
newWireIn = self.doubleSpinBox_15.value()
self.nerfModel.SendPara(newVal=newWireIn, trigEvent=15)
def plotData(self, data):
from pylab import plot, show, subplot
import numpy as np
if (data != []):
forplot = np.array(data)
for i in xrange(NUM_CHANNEL):
subplot(NUM_CHANNEL, 1, i + 1)
plot(forplot[:, i])
show()
@pyqtSignature("QString")
def on_comboBox_activated(self, p0):
"""
Slot documentation goes here.
"""
choice = p0
if choice == "Spike Train 1Hz":
pipeInData = spike_train(firing_rate=1)
# pipeInData = gen_sin(F = 1.0, AMP = 0.3)
elif choice == "Spike Train 10Hz":
pipeInData = spike_train(firing_rate=100)
# pipeInData = gen_sin(F = 4.0, AMP = 0.3)
elif choice == "Spike Train 20Hz":
# pipeInData = gen_tri()
pipeInData = spike_train(firing_rate=500)
self.nerfModel.SendPipeInt(pipeInData) # for spike_train()
@pyqtSignature("int")
def on_horizontalSlider_sliderMoved(self, position):
"""
Slot documentation goes here.
"""
self.onClkRate(position)
@pyqtSignature("bool")
def on_pushButton_2_clicked(self, checked):
"""
Slot documentation goes here.
"""
self.dispView.close()
self.plotData(self.data)
@pyqtSignature("int")
def on_horizontalSlider_valueChanged(self, value):
"""
Slot documentation goes here.
"""
self.onClkRate(value)
@pyqtSignature("bool")
def on_pushButton_5_clicked(self, checked):
"""
Slot documentation goes here.
"""
newResetSim = checked
self.nerfModel.SendButton(newResetSim, BUTTON_RESET_SIM)
@pyqtSignature("bool")
def on_pushButton_4_clicked(self, checked):
"""
Slot documentation goes here.
"""
newResetGlobal = checked
self.nerfModel.SendButton(newResetGlobal, BUTTON_RESET)
@pyqtSignature("bool")
def on_pushButtonData_clicked(self, checked):
"""
Slot documentation goes here.
"""
self.isLogData = checked
@pyqtSignature("bool")
def on_pushButton_6_clicked(self, checked):
"""
Slot documentation goes here.
"""
newButton1 = checked
self.nerfModel.SendButton(newButton1, BUTTON_1)
@pyqtSignature("bool")
def on_pushButton_7_clicked(self, checked):
"""
Slot documentation goes here.
"""
newButton2 = checked
self.nerfModel.SendButton(newButton2, BUTTON_2)
class User(QDialog, Ui_Dialog):
"""
Class documentation goes here.
"""
def __init__(self, parent=None):
"""
Constructor
"""
# QDialog.__init__(self, parent, Qt.FramelessWindowHint)
QDialog.__init__(self, parent)
self.setupUi(self)
self.nerfModel = Model()
self.dispView = View(None, VIEWER_REFRESH_RATE, CHIN_PARAM)
self.dispView.show()
self.data = []
self.isLogData = False
# Create float_spin for each input channel
self.ctrl_all = []
for (trig_id, name, type, value) in CHOUT_PARAM:
exec interp(
'self.ctrl_#{name} = CtrlChannel(hostDialog=self, name=name, id=trig_id, type=type, value=value)'
)
exec interp(
'self.connect(self.ctrl_#{name}.doubleSpinBox, SIGNAL("editingFinished()"), self.onNewWireIn)'
)
exec interp(
'self.connect(self.ctrl_#{name}.doubleSpinBox, SIGNAL("valueChanged(double)"), self.onNewWireIn)'
)
exec interp('self.ctrl_all.append(self.ctrl_#{name})')
# Timer for pulling data, separated from timer_display
self.timer = QTimer(self)
self.connect(self.timer, SIGNAL("timeout()"), self.onSyncData)
self.timer.start(VIEWER_REFRESH_RATE)
self.on_horizontalSlider_valueChanged(5)
def onSyncData(self):
"""
Core function of Controller, which polls data from Model(fpga) and sends them to Viewer.
"""
newData = []
for xaddr, xtype in zip(DATA_OUT_ADDR, CH_TYPE):
#newData[i] = self.nerfModel.ReadFPGA(DATA_OUT_ADDR[i], CH_TYPE[i])
# if i == 3:
# newData[i] = newData[i] / 100
newData.append(
max(-16777216,
min(16777216, self.nerfModel.ReadFPGA(xaddr, xtype))))
newSpike1 = self.nerfModel.ReadPipe(0xA0, 5000) # read ## bytes
newSpike2 = self.nerfModel.ReadPipe(0xA1, 5000) # read ## bytes
newSpike3 = self.nerfModel.ReadPipe(0xA2, 5000) # read ## bytes
newSpike4 = self.nerfModel.ReadPipe(0xA3, 5000) # read ## bytes
newSpike5 = self.nerfModel.ReadPipe(0xA4, 5000) # read ## bytes
#newSpike = "" # read ## bytes
self.dispView.newDataIO(
newData, [newSpike1, newSpike2, newSpike3, newSpike4, newSpike5])
#self.dispView.newDataIO(newData, [])
if (self.isLogData):
self.data.append(newData)
def onClkRate(self, value):
""" value = how many times of 1/10 real-time
"""
newHalfCnt = 10 * 200 * (
10**6) / SAMPLING_RATE / NUM_NEURON / value / 2 / 4
self.nerfModel.SendPara(bitVal=newHalfCnt, trigEvent=DATA_EVT_CLKRATE)
def onNewWireIn(self):
for ctrl in self.ctrl_all:
newWireIn = ctrl.doubleSpinBox.value()
if newWireIn != ctrl.currVal:
ctrl.currValue = newWireIn
if (ctrl.type == 'int32'):
bitVal = ConvertType(floor(newWireIn),
fromType='i',
toType='I')
# print bitVal
elif (ctrl.type == 'float32'):
bitVal = ConvertType(newWireIn, fromType='f', toType='I')
self.nerfModel.SendPara(bitVal=bitVal, trigEvent=ctrl.id)
def plotData(self, data):
from pylab import plot, show, subplot
from scipy.io import savemat, loadmat
import numpy as np
if (data != []):
forplot = np.array(data)
for i in xrange(NUM_CHANNEL):
subplot(NUM_CHANNEL, 1, i + 1)
plot(forplot[:, i])
show()
savemat("./matlab_cmn.mat", {"lce": forplot[:, 0], "Ia": forplot[:, 1], \
"II": forplot[:, 2], "force": forplot[:, 3], \
"emg": forplot[:, 4]})
@pyqtSignature("QString")
def on_comboBox_activated(self, p0):
"""
Slot documentation goes here.
"""
choice = p0
if choice == "Spike Train 1Hz":
# pipeInData = spike_train(firing_rate = 1)
pipeInData = gen_sin(F=1.0, AMP=100.0, T=2.0)
elif choice == "Spike Train 10Hz":
# pipeInData = spike_train(firing_rate = 10)
# pipeInData = gen_sin(F = 4.0, AMP = 0.3)
pipeInData = gen_tri(T=2.0)
elif choice == "Spike Train 20Hz":
# pipeInData = gen_tri()
# pipeInData = gen_ramp(T = [0.0, 0.1, 0.2, 0.8, 0.9, 2.0], L = [1.0, 1.0, 1.1, 1.1, 1.0, 1.0], FILT = False)
pipeInData = gen_ramp(T=[0.0, 0.1, 1.8, 1.85, 1.9, 2.0],
L=[0, 0, 15000, 15000, 0, 0],
FILT=False)
# pipeInData = spike_train(firing_rate = 100)
self.nerfModel.SendPipe(pipeInData)
@pyqtSignature("int")
def on_horizontalSlider_sliderMoved(self, position):
"""
Slot documentation goes here.
"""
self.onClkRate(position)
@pyqtSignature("bool")
def on_pushButton_2_clicked(self, checked):
"""
Slot documentation goes here.
"""
self.dispView.close()
self.plotData(self.data)
@pyqtSignature("int")
def on_horizontalSlider_valueChanged(self, value):
"""
Slot documentation goes here.
"""
self.onClkRate(value)
@pyqtSignature("bool")
def on_pushButton_5_clicked(self, checked):
"""
Slot documentation goes here.
"""
newResetSim = checked
self.nerfModel.SendButton(newResetSim, BUTTON_RESET_SIM)
@pyqtSignature("bool")
def on_pushButton_4_clicked(self, checked):
"""
Slot documentation goes here.
"""
newResetGlobal = checked
self.nerfModel.SendButton(newResetGlobal, BUTTON_RESET)
@pyqtSignature("bool")
def on_pushButtonData_clicked(self, checked):
"""
Slot documentation goes here.
"""
self.isLogData = checked