def start():
"""
Finish configuration and configure Gaudi application manager
@author M.Frank
"""
import OnlineEnv
Gaudi.appendPostConfigAction(postConfig)
OnlineEnv.end_config(False)
def setupOnline(directory, prefix, filename):
"""
Setup the online environment: Buffer managers, event serialisation, etc.
@author M.Frank
"""
class __MonAdd:
def __init__(self):
pass
def addMonitors(self):
GaudiSequencer("EscherSequencer").Members += ["HistogramResetter"]
from Configurables import LHCb__FILEEvtSelector as es
Online = importOnline()
app = Gaudi.ApplicationMgr()
app.AppName = ''
HistogramPersistencySvc().OutputFile = ""
app.HistogramPersistency = ''
app.SvcOptMapping.append('LHCb::FILEEvtSelector/EventSelector')
app.SvcOptMapping.append('LHCb::FmcMessageSvc/MessageSvc')
app.ExtSvc.insert(0, "MonitorSvc")
sel = es("EventSelector")
sel.Input = filename
sel.Directory = directory
sel.OutputLevel = MSG_INFO
sel.DeleteFiles = False
sel.FilePrefix = prefix
sel.Decode = False
sel.Pause = True
sel.PauseSleep = 5000
sel.AllowedRuns = Online.DeferredRuns if hasattr(Online,
"DeferredRuns") else []
app.EvtSel = sel
app.EvtMax = -1
Online.rawPersistencySvc()
evtloop = Configs.EventLoopMgr('EventLoopMgr')
evtloop.Warnings = False
evtloop.EvtSel = sel
app.EventLoop = evtloop
runable = Configs.LHCb__EventRunable("Runable")
runable.MEPManager = ""
app.Runable = runable
app.AuditAlgorithms = False
Configs.MonitorSvc().OutputLevel = MSG_ERROR
Configs.MonitorSvc().UniqueServiceNames = 1
Configs.MonitorSvc().CounterUpdateInterval = -1
Configs.MonitorSvc().DimUpdateInterval = -1
Configs.RootHistCnv__PersSvc("RootHistSvc").OutputLevel = MSG_ERROR
mon = __MonAdd()
Gaudi.appendPostConfigAction(mon.addMonitors)
app.OutputLevel = MSG_INFO
cdb = CondDB()
cdb.Online = True
def patchBrunel():
"""
Instantiate the options to run Brunel with raw data
@author M.Frank
"""
import GaudiConf.DstConf
import Brunel.Configuration
import OnlineEnv
brunel = Brunel.Configuration.Brunel()
brunel.OnlineMode = True
try:
brunel.DDDBtag = OnlineEnv.DDDBTag
except:
print "DDDBTag not found, use default"
try:
brunel.CondDBtag = OnlineEnv.CondDBTag
except:
print "CondDBTag not found, use default"
##print '[ERROR]', OnlineEnv.DDDBTag, OnlineEnv.CondDBTag
conddb = CondDB()
conddb.IgnoreHeartBeat = True
#
# Adjust to pickup the proper online conditions
#
import ConditionsMap
conddb.setProp('RunChangeHandlerConditions',
ConditionsMap.RunChangeHandlerConditions)
conddb.setProp('EnableRunChangeHandler', True)
brunel.DataType = "2015"
brunel.UseDBSnapshot = True # Try it
brunel.WriteFSR = False # This crashes Jaap's stuff
conddb = CondDB()
conddb.Online = True
#
# Adjust to pickup the proper online conditions from ConditionsMap
#
conddb.RunChangeHandlerConditions = ConditionsMap.RunChangeHandlerConditions
conddb.setProp('EnableRunChangeHandler', True)
# Enabled data-on-demand
Gaudi.ApplicationMgr().ExtSvc += ["DataOnDemandSvc"]
# The sequencer to run all the PID monitoring in
seq = GaudiSequencer("PIDMoniSeq")
# Set up PID monitoring sequence
pidSeq = GaudiSequencer("RichPIDSelections")
seq.Members += [pidSeq]
# Set options
brunel.setOtherProps(RichPIDQCConf(), ['OutputLevel', 'Context'])
RichPIDQCConf().setProp("CalibSequencer", pidSeq)
class __MonAdd:
def __init__(self, s):
self.seq = s
def addMonitors(self):
# Append to processing
GaudiSequencer("PhysicsSeq").Members += [self.seq]
mon = __MonAdd(seq)
Gaudi.appendPostConfigAction(mon.addMonitors)
EventLoopMgr().OutputLevel = MSG_DEBUG #ERROR
EventLoopMgr().Warnings = False
brunel.UseDBSnapshot = True # try it
Brunel.Configuration.Brunel.configureOutput = dummy
HistogramPersistencySvc().OutputFile = ""
HistogramPersistencySvc().OutputLevel = MSG_ERROR
print brunel
return brunel
def patchBrunel():
"""
Instantiate the options to run Brunel with raw data
@author M.Frank
"""
import GaudiConf.DstConf
import Brunel.Configuration
import OnlineEnv
brunel = Brunel.Configuration.Brunel()
brunel.OnlineMode = True
try:
brunel.DDDBtag = OnlineEnv.DDDBTag
except:
print "DDDBTag not found, use default"
try:
brunel.CondDBtag = OnlineEnv.CondDBTag
except:
print "CondDBTag not found, use default"
##print '[ERROR]', OnlineEnv.DDDBTag, OnlineEnv.CondDBTag
conddb = CondDB()
conddb.IgnoreHeartBeat = True
#
# Adjust to pickup the proper online conditions
#
import ConditionsMap
conddb.setProp('RunChangeHandlerConditions',
ConditionsMap.RunChangeHandlerConditions)
conddb.setProp('EnableRunChangeHandler', True)
brunel.DataType = "2015"
brunel.UseDBSnapshot = True # Try it
brunel.WriteFSR = False # This crashes Jaap's stuff
conddb = CondDB()
conddb.Online = True
#
# Adjust to pickup the proper online conditions from ConditionsMap
#
conddb.RunChangeHandlerConditions = ConditionsMap.RunChangeHandlerConditions
conddb.setProp('EnableRunChangeHandler', True)
# Enabled data-on-demand
Gaudi.ApplicationMgr().ExtSvc += ["DataOnDemandSvc"]
################################################################################
# #
# Set up PID monitoring sequence #
# #
################################################################################
# The sequencer to run all the monitoring in
seq = GaudiSequencer("PIDMoniSeq")
pidSeq = GaudiSequencer("RichPIDSelections")
brunel.setOtherProps(RichPIDQCConf(), ['OutputLevel', 'Context'])
RichPIDQCConf().setProp("CalibSequencer", pidSeq)
seq.Members += [pidSeq]
################################################################################
# #
# Configure the muon efficiency monitor #
# #
################################################################################
muEffMoni = MuEffMonitor("MuEffMonitor")
muEffMoni.addTool(TrackMasterExtrapolator, name="MuEffExtrap")
muEffMoni.Extrapolator = muEffMoni.MuEffExtrap
muEffMoni.MuEffExtrap.ApplyMultScattCorr = True
muEffMoni.MuEffExtrap.ApplyEnergyLossCorr = True
muEffMoni.MuEffExtrap.MaterialLocator = "SimplifiedMaterialLocator"
muEffMoni.MuEffExtrap.OutputLevel = 6
muEffMoni.nSigma1X = [11., 8., 7., 7.]
muEffMoni.nSigma1Y = [6., 5., 5., 5.]
muEffMoni.nSigmaX = [5., 5., 5., 5.]
muEffMoni.nSigmaY = [5., 5., 5., 5.]
muEffMoni.RequiredStations = 4
muEffMoni.MomentumCut = 3000.0
muEffMoni.nSigmaFidVol = 3.0
muEffMoni.UseCalo = True
muEffMoni.EecalMax = 1500.0
muEffMoni.EhcalMax = 5000.0
muEffMoni.EhcalMin = 1000.0
muEffMoni.Chi2ProbTrMin = 0.01
muEffMoni.Chi2MuMin = 10.0
muEffMoni.nSigmaXother = 2.0
muEffMoni.nSigmaYother = 2.0
muEffMoni.HistoLevel = "OfflineFull"
seq.Members += [muEffMoni]
################################################################################
# #
# Configure the muon pid monitor #
# #
################################################################################
from Configurables import MuIDMonitor, CombineParticles
from Configurables import FilterDesktop
from StandardParticles import StdNoPIDsPions, StdNoPIDsProtons, StdNoPIDsMuons
from PhysSelPython.Wrappers import Selection, SelectionSequence, DataOnDemand
MuPidMoniSeq_Lambda = GaudiSequencer("MuPidMoniSeq_Lambda")
MuPidMoniSeq_Jpsi = GaudiSequencer("MuPidMoniSeq_Jpsi")
#
# Make pions and protons
#
PionsFilter = FilterDesktop("PionsFilter")
PionsFilter.Code = "(P>3000*MeV) & (PT>100*MeV) & (TRCHI2DOF<2) & (ISLONG) & (MIPCHI2DV(PRIMARY)>9)"
PionsFilterSel = Selection("PionsFilterSel",
Algorithm=PionsFilter,
RequiredSelections=[StdNoPIDsPions])
ProtonsFilter = FilterDesktop("ProtonsFilter")
ProtonsFilter.Code = "(P>3000*MeV) & (PT>100*MeV) & (TRCHI2DOF<2) & (ISLONG) & (MIPCHI2DV(PRIMARY)>9)"
ProtonsFilterSel = Selection("ProtonsFilterSel",
Algorithm=ProtonsFilter,
RequiredSelections=[StdNoPIDsProtons])
#
# Make Lambda_0
#
LambdaMonitor = CombineParticles("LambdaMonitor")
LambdaMonitor.DecayDescriptor = "[Lambda0 -> p+ pi-]cc"
LambdaMonitor.CombinationCut = "(ADAMASS('Lambda0')<10*MeV)"
LambdaMonitor.MotherCut = "(50<BPVVDZ) & (600>BPVVDZ) & (BPVDIRA>0.9999995) & (CHILDCUT((PT>0.2*GeV),1) | CHILDCUT((PT>0.2*GeV),2)) & (ADWM('KS0', WM('pi+', 'pi-')) > 20*MeV)"
LambdaMonitorSel = Selection(
"LambdaMonitorSel",
Algorithm=LambdaMonitor,
RequiredSelections=[PionsFilterSel, ProtonsFilterSel])
LambdaMonitorSeq = SelectionSequence("LambdaMonitorSeq",
TopSelection=LambdaMonitorSel)
MuPidMoniSeq_Lambda.Members += [LambdaMonitorSeq.sequence()]
#
# Make muons and J/psi
#
mucocut = '(0.5<PPINFO(LHCb.ProtoParticle.InAccMuon,-1)) & (P>3*GeV) & (PT>800*MeV) & (TRCHI2DOF<3) & (ISLONG)'
tag1cuts = " (CHILDCUT(ISMUON,1)) & (CHILDCUT((P>6*GeV),1)) & (CHILDCUT((PT>1.5*GeV),1)) "
tag2cuts = " (CHILDCUT(ISMUON,2)) & (CHILDCUT((P>6*GeV),2)) & (CHILDCUT((PT>1.5*GeV),2)) "
probe2cuts = " ( (CHILDCUT((PPINFO(LHCb.ProtoParticle.CaloEcalE,-10000)<1000*MeV),2)) & (CHILDCUT((PPINFO(LHCb.ProtoParticle.CaloHcalE,-10000)<4000*MeV),2)) & (CHILDCUT((PPINFO(LHCb.ProtoParticle.CaloEcalE,-10000)>-10*MeV),2)) & (CHILDCUT((PPINFO(LHCb.ProtoParticle.CaloHcalE,-10000)>1000*MeV),2)) ) "
probe1cuts = " ( (CHILDCUT((PPINFO(LHCb.ProtoParticle.CaloEcalE,-10000)<1000*MeV),1)) & (CHILDCUT((PPINFO(LHCb.ProtoParticle.CaloHcalE,-10000)<4000*MeV),1)) & (CHILDCUT((PPINFO(LHCb.ProtoParticle.CaloEcalE,-10000)>-10*MeV),1)) & (CHILDCUT((PPINFO(LHCb.ProtoParticle.CaloHcalE,-10000)>1000*MeV),1)) ) "
child1cuts = tag1cuts + " & " + probe2cuts
child2cuts = tag2cuts + " & " + probe1cuts
MuonsFilter = FilterDesktop("MuonsFilter")
MuonsFilter.Code = mucocut
MuonsFilterSel = Selection("MuonsFilterSel",
Algorithm=MuonsFilter,
RequiredSelections=[StdNoPIDsMuons])
JpsiMonitor = CombineParticles("JpsiMonitor")
JpsiMonitor.DecayDescriptor = "J/psi(1S) -> mu+ mu-"
JpsiMonitor.CombinationCut = "(ADAMASS('J/psi(1S)')<300*MeV)"
JpsiMonitor.MotherCut = "(VFASPF(VCHI2/VDOF)<20) & ( " + child1cuts + " | " + child2cuts + " ) "
JpsiMonitor.OutputLevel = 6
JpsiMonitorSel = Selection("JpsiMonitorSel",
Algorithm=JpsiMonitor,
RequiredSelections=[MuonsFilterSel])
JpsiMonitorSeq = SelectionSequence("JpsiMonitorSeq",
TopSelection=JpsiMonitorSel)
MuPidMoniSeq_Jpsi.Members += [JpsiMonitorSeq.sequence()]
#
# Monitoring muon mis-id with Lambda_0
#
MuIDLambdaPlot = MuIDMonitor("MuIDLambdaPlot")
MuIDLambdaPlot.Inputs = [LambdaMonitorSel.outputLocation()]
MuIDLambdaPlot.OutputLevel = 6
MuIDLambdaPlot.MassMean = 1115.68
MuIDLambdaPlot.MassWindow = 20.
MuIDLambdaPlot.EffMassWin = 2.
MuIDLambdaPlot.JpsiAnalysis = 0
MuIDLambdaPlot.LambdaAnalysis = 1
MuIDLambdaPlot.HitInFoi = 1
MuIDLambdaPlot.PreSelMomentum = 3000. # MuonID preselection momentum (MeV/c)
MuIDLambdaPlot.MomentumCuts = [6000., 10000.
] # MuonID momentum cut ranges (MeV/c)
# MuonID FOI parameters
MuIDLambdaPlot.FOIfactor = 1.
MuIDLambdaPlot.XFOIParameter1 = [
5.5, 4.0, 3.3, 2.8, 5.2, 3.6, 2.4, 2.4, 5.7, 4.4, 2.8, 2.3, 5.1, 3.1,
2.3, 2.1, 5.8, 3.4, 2.6, 2.8
]
MuIDLambdaPlot.XFOIParameter2 = [
11., 3., 1., 1., 31., 28., 21., 17., 30., 31., 27., 22., 28., 33., 35.,
47., 31., 39., 56., 151.
]
MuIDLambdaPlot.XFOIParameter3 = [
0.20, 0.08, 0.03, 0.1, 0.06, 0.08, 0.10, 0.15, 0.04, 0.06, 0.09, 0.12,
0.08, 0.15, 0.23, 0.36, 0.07, 0.14, 0.24, 0.49
]
MuIDLambdaPlot.YFOIParameter1 = [
2.8, 1.7, -153., 1.9, 3.3, 2.1, 1.7, 1.6, 3.6, 2.8, 1.9, 1.8, 4.4, 3.3,
2.2, 2.2, 4.8, 3.9, 2.6, 2.3
]
MuIDLambdaPlot.YFOIParameter2 = [
3., 2., 156., 0., 17., 15., 9., 5., 26., 25., 16., 15., 30., 49., 57.,
92., 32., 55., 96., 166.
]
MuIDLambdaPlot.YFOIParameter3 = [
0.03, 0.02, 0.00, 0.09, 0.13, 0.19, 0.19, 0.24, 0.11, 0.19, 0.21, 0.32,
0.10, 0.22, 0.30, 0.52, 0.08, 0.20, 0.34, 0.52
]
#
# Parameters of the Landau functions
#
MuIDLambdaPlot.distMuon = [
0.311, 1.349, 0.524, 0.0020, 17., 10.6, 0.04, 4.1, 1.64
]
MuIDLambdaPlot.distPion = [
11., -12., 0.2029, -0.026, 0.06, 0.59, 0.008, -29., 41.
]
MuPidMoniSeq_Lambda.Members += [MuIDLambdaPlot]
#
# Monitoring muon id with J/psi
#
MuIDJpsiPlot = MuIDMonitor("MuIDJpsiPlot")
MuIDJpsiPlot.Inputs = [JpsiMonitorSel.outputLocation()]
MuIDJpsiPlot.OutputLevel = 6
MuIDJpsiPlot.MassMean = 3096.91
MuIDJpsiPlot.MassWindow = 300.
MuIDJpsiPlot.EffMassWin = 20.
MuIDJpsiPlot.JpsiAnalysis = 1
MuIDJpsiPlot.LambdaAnalysis = 0
MuIDJpsiPlot.HitInFoi = 1
MuIDJpsiPlot.PreSelMomentum = MuIDLambdaPlot.PreSelMomentum
MuIDJpsiPlot.MomentumCuts = MuIDLambdaPlot.MomentumCuts
# MuonID FOI parameters
MuIDJpsiPlot.FOIfactor = MuIDLambdaPlot.FOIfactor
MuIDJpsiPlot.XFOIParameter1 = MuIDLambdaPlot.XFOIParameter1
MuIDJpsiPlot.XFOIParameter2 = MuIDLambdaPlot.XFOIParameter2
MuIDJpsiPlot.XFOIParameter3 = MuIDLambdaPlot.XFOIParameter3
MuIDJpsiPlot.YFOIParameter1 = MuIDLambdaPlot.YFOIParameter1
MuIDJpsiPlot.YFOIParameter2 = MuIDLambdaPlot.YFOIParameter2
MuIDJpsiPlot.YFOIParameter3 = MuIDLambdaPlot.YFOIParameter3
#
# Parameters of the Landau functions
#
MuIDJpsiPlot.distMuon = MuIDLambdaPlot.distMuon
MuIDJpsiPlot.distPion = MuIDLambdaPlot.distPion
MuPidMoniSeq_Jpsi.Members += [MuIDJpsiPlot]
MuPidMoniSeq_Jpsi.IgnoreFilterPassed = True
MuPidMoniSeq_Lambda.IgnoreFilterPassed = True
seq.Members += [MuPidMoniSeq_Lambda, MuPidMoniSeq_Jpsi]
# set the options
class __MonAdd:
def __init__(self, s):
self.seq = s
def addMonitors(self):
# Append to processing
GaudiSequencer("PhysicsSeq").Members += [self.seq]
mon = __MonAdd(seq)
Gaudi.appendPostConfigAction(mon.addMonitors)
EventLoopMgr().OutputLevel = MSG_DEBUG #ERROR
EventLoopMgr().Warnings = False
brunel.UseDBSnapshot = True # try it
Brunel.Configuration.Brunel.configureOutput = dummy
HistogramPersistencySvc().OutputFile = ""
HistogramPersistencySvc().OutputLevel = MSG_ERROR
print brunel
return brunel
input_files = glob.glob("/tmp/thead/stereo-%i/*.digi" % (stereo))
IOHelper("ROOT").inputFiles(input_files)
def setup_mc_truth_matching():
GaudiSequencer("CaloBanksHandler").Members = []
GaudiSequencer("DecodeTriggerSeq").Members = []
GaudiSequencer("MCLinksTrSeq").Members = [
"VPClusterLinker", "PrLHCbID2MCParticle", "PrTrackAssociator"
]
GaudiSequencer("CheckPatSeq").Members = ["PrChecker"]
from Configurables import PrLHCbID2MCParticle
#PrLHCbID2MCParticle().OutputLevel = 2
PrTrackAssociator().RootOfContainers = "/Event/Rec/Track"
PrChecker().TriggerNumbers = True
PrChecker().Eta25Cut = True
PrChecker().WriteVeloHistos = 2
PrChecker().WriteForwardHistos = 2
PrChecker().WriteMatchHistos = 2
PrChecker().WriteDownHistos = 2
PrChecker().WriteUpHistos = 2
PrChecker().WriteTTrackHistos = 2
PrChecker().WriteBestHistos = 2
PrChecker().WriteBestLongHistos = 2
PrChecker().WriteBestDownstreamHistos = 2
GC.appendPostConfigAction(setup_mc_truth_matching)
PrSeedingXLayers().XOnly = x_only
input_files = glob.glob("/tmp/thead/stereo-%i/*.digi"%(stereo))
IOHelper("ROOT").inputFiles(input_files)
def setup_mc_truth_matching():
GaudiSequencer("CaloBanksHandler").Members = []
GaudiSequencer("DecodeTriggerSeq").Members = []
GaudiSequencer("MCLinksTrSeq").Members = ["VPClusterLinker",
"PrLHCbID2MCParticle",
"PrTrackAssociator"]
GaudiSequencer("CheckPatSeq" ).Members = ["PrChecker"]
from Configurables import PrLHCbID2MCParticle
#PrLHCbID2MCParticle().OutputLevel = 2
PrTrackAssociator().RootOfContainers = "/Event/Rec/Track"
PrChecker().TriggerNumbers = True
PrChecker().Eta25Cut = True
PrChecker().WriteVeloHistos = 2
PrChecker().WriteForwardHistos = 2
PrChecker().WriteMatchHistos = 2
PrChecker().WriteDownHistos = 2
PrChecker().WriteUpHistos = 2
PrChecker().WriteTTrackHistos = 2
PrChecker().WriteBestHistos = 2
PrChecker().WriteBestLongHistos = 2
PrChecker().WriteBestDownstreamHistos = 2
GC.appendPostConfigAction(setup_mc_truth_matching)
