def main():
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print(
"Not enough arguments passed to script execution. Printing docstring & EXIT."
)
sys.exit(0)
else:
pass
###################
## SETUP THE PROCESS
###################
maxEvents = {}
process = Process(prefix, maxEvents=maxEvents)
###################
## ADD DATASETS
###################
process.addDatasetsFromMulticrab(sys.argv[1],
blacklist=blacklist,
whitelist=whitelist)
# Enable genuine tau histograms for common plots (needed for calculating N_QCD)
allSelections.CommonPlots.enableGenuineTauHistograms = True
# Set splitting of phase space (first bin is below first edge value and last bin is above last edge value)
allSelections.CommonPlots.histogramSplitting = [
PSet(label="tauPt_1", binLowEdges=[40, 60], useAbsoluteValues=False),
PSet(label="decayMode_1", binLowEdges=[2, 3], useAbsoluteValues=False),
PSet(label="tauPt_2",
binLowEdges=[20, 40, 60],
useAbsoluteValues=False),
PSet(label="decayMode_2",
binLowEdges=[1, 2, 3],
useAbsoluteValues=False),
]
##################
## BUILD ANALYSIS MODULES
###################
builder = AnalysisBuilder(
prefix,
dataEras,
searchModes,
### OPRIONS ###
usePUreweighting=True,
useTopPtReweighting=False,
doSystematicVariations=True,
analysisType="HToHW_background")
builder.build(process, allSelections)
process.run()
def main():
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print("Not enough arguments passed to script execution. Printing docstring & EXIT.")
sys.exit(0)
else:
pass
###################
## SETUP THE PROCESS
###################
maxEvents = {}
process = Process(prefix, maxEvents = maxEvents)
###################
## ADD DATASETS
###################
process.addDatasetsFromMulticrab(sys.argv[1],blacklist=blacklist,whitelist=whitelist)
##################
## BUILD ANALYSIS MODULES
###################
builder = AnalysisBuilder(prefix,
dataEras,
searchModes,
### OPRIONS ###
usePUreweighting = True,
useTopPtReweighting = False,
doSystematicVariations = False
)
builder.build(process, allSelections)
process.run()
# Build analysis modules
from HiggsAnalysis.NtupleAnalysis.AnalysisBuilder import AnalysisBuilder
builder = AnalysisBuilder(
"BTagEfficiencyAnalysis",
dataEras,
searchModes,
#### Options ####
usePUreweighting=True,
doSystematicVariations=False,
)
builder.addVariation("BJetSelection.bjetDiscr", [
"pfCombinedInclusiveSecondaryVertexV2BJetTags", "pfCombinedMVAV2BJetTags"
])
builder.addVariation("BJetSelection.bjetDiscrWorkingPoint",
["Loose", "Medium", "Tight"])
builder.build(process, allSelections)
# Example of adding an analyzer whose configuration depends on dataVersion
#def createAnalyzer(dataVersion):
#a = Analyzer("ExampleAnalysis")
#if dataVersion.isMC():
#a.tauPtCut = 10
#else:
#a.tauPtCut = 20
#return a
#process.addAnalyzer("test2", createAnalyzer)
# Pick events
#process.addOptions(EventSaver = PSet(enabled = True,pickEvents = True))
# Run the analysis
def main():
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print("Not enough arguments passed to script execution. Printing docstring & EXIT.")
print __doc__
sys.exit(0)
else:
pass
# ================================================================================================
# Setup the process
# ================================================================================================
maxEvents = {}
maxEvents["All"] = opts.nEvts
process = Process(prefix, postfix, maxEvents)
# ================================================================================================
# Add the datasets (according to user options)
# ================================================================================================
if (opts.includeOnlyTasks):
Print("Adding only dataset %s from multiCRAB directory %s" % (opts.includeOnlyTasks, opts.mcrab))
process.addDatasetsFromMulticrab(opts.mcrab, includeOnlyTasks=opts.includeOnlyTasks)
elif (opts.excludeTasks):
Print("Adding all datasets except %s from multiCRAB directory %s" % (opts.excludeTasks, opts.mcrab))
Print("If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc...")
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=opts.excludeTasks)
else:
#myBlackList = ["QCD_b"]
Print("Adding all datasets from multiCRAB directory %s" % (opts.mcrab))
Print("If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc...")
regex = "|".join(myBlackList)
if len(myBlackList)>0:
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=regex)
else:
process.addDatasetsFromMulticrab(opts.mcrab)
# ================================================================================================
# Overwrite Default Settings
# ================================================================================================
from HiggsAnalysis.NtupleAnalysis.parameters.hplus2tbAnalysis import allSelections
allSelections.verbose = opts.verbose
allSelections.histogramAmbientLevel = opts.histoLevel
# allSelections.BjetSelection.triggerMatchingApply = True
# allSelections.TopSelection.ChiSqrCutValue = 100.0
# allSelections.BJetSelection.numberOfBJetsCutValue = 0
# allSelections.BJetSelection.numberOfBJetsCutDirection = "=="
#allSelections.TopSelectionBDT.WeightFile = "TopRecoTree_180523_DeltaR0p3_DeltaPtOverPt0p32_TopPtReweighting_BDTG.weights.xml"
# ================================================================================================
# Add Analysis Variations
# ================================================================================================
# selections = allSelections.clone()
# process.addAnalyzer(prefix, Analyzer(prefix, config=selections, silent=False) ) #trigger passed from selections
# ================================================================================================
# Command Line Options
# ================================================================================================
# from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import applyAnalysisCommandLineOptions
# applyAnalysisCommandLineOptions(sys.argv, allSelections)
#================================================================================================
# Build analysis modules
#================================================================================================
PrintOptions(opts)
builder = AnalysisBuilder(prefix,
dataEras,
searchModes,
usePUreweighting = opts.usePUreweighting,
useTopPtReweighting = opts.useTopPtReweighting,
doSystematicVariations = opts.doSystematics)
# Add variations (e.g. for optimisation)
# builder.addVariation("METSelection.METCutValue", [100,120,140])
# builder.addVariation("AngularCutsBackToBack.workingPoint", ["Loose","Medium","Tight"])
# builder.addVariation("BJetSelection.triggerMatchingApply", [False])
# builder.addVariation("TopSelection.ChiSqrCutValue", [5, 10, 15, 20])
# Build the builder
builder.build(process, allSelections)
# ================================================================================================
# Example of adding an analyzer whose configuration depends on dataVersion
# ================================================================================================
#def createAnalyzer(dataVersion):
#a = Analyzer("ExampleAnalysis")
#if dataVersion.isMC():
#a.tauPtCut = 10
#else:
#a.tauPtCut = 20
#return a
#process.addAnalyzer("test2", createAnalyzer)
# ================================================================================================
# Pick events
# ================================================================================================
#process.addOptions(EventSaver = PSet(enabled = True,pickEvents = True))
# ================================================================================================
# Run the analysis
# ================================================================================================
# Run the analysis with PROOF? You can give proofWorkers=<N> as a parameter
if opts.jCores:
Print("Running process with PROOF (proofWorkes=%s)" % ( str(opts.jCores) ) )
process.run(proof=True, proofWorkers=opts.jCores)
else:
Print("Running process")
process.run()
def main():
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print("Not enough arguments passed to script execution. Printing docstring & EXIT.")
print __doc__
sys.exit(0)
else:
pass
# ================================================================================================
# Setup the process
# ================================================================================================
process = Process(prefix, postfix, opts.nEvts)
# ================================================================================================
# Add the datasets (according to user options)
# ================================================================================================
if (opts.includeOnlyTasks):
Print("Adding only dataset %s from multiCRAB directory %s" % (opts.includeOnlyTasks, opts.mcrab))
process.addDatasetsFromMulticrab(opts.mcrab, includeOnlyTasks=opts.includeOnlyTasks)
elif (opts.excludeTasks):
Print("Adding all datasets except %s from multiCRAB directory %s" % (opts.excludeTasks, opts.mcrab))
Print("If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc...")
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=opts.excludeTasks)
else:
Print("Adding all datasets from multiCRAB directory %s" % (opts.mcrab))
Print("If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc...")
process.addDatasetsFromMulticrab(opts.mcrab)
# ================================================================================================
# Selection customisations
# ================================================================================================
from HiggsAnalysis.NtupleAnalysis.parameters.hplus2tbAnalysis import allSelections
#from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import allSelections
# Overwrite verbosity
allSelections.verbose = opts.verbose
# Overwrite histo ambient level (Options: Systematics, Vital, Informative, Debug)
allSelections.histogramAmbientLevel = opts.histoLevel
# Set splitting of phase space (first bin is below first edge value and last bin is above last edge value)
# allSelections.CommonPlots.histogramSplitting = [
# PSet(label="tauPt", binLowEdges=[60.0, 70.0, 80.0, 100.0], useAbsoluteValues=False),
# ]
# allSelections.TauSelection.rtau = 0.0
# allSelections.BJetSelection.numberOfBJetsCutValue = 0
# allSelections.BJetSelection.numberOfBJetsCutDirection = "=="
# ================================================================================================
# Add Analysis Variations
# ================================================================================================
# selections = allSelections.clone()
# process.addAnalyzer(prefix, Analyzer(prefix, config=selections, silent=False) ) #trigger passed from selections
# ================================================================================================
# Command Line Options
# ================================================================================================
# from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import applyAnalysisCommandLineOptions
# applyAnalysisCommandLineOptions(sys.argv, allSelections)
#================================================================================================
# Build analysis modules
#================================================================================================
PrintOptions(opts)
builder = AnalysisBuilder(prefix,
dataEras,
searchModes,
usePUreweighting = opts.usePUreweighting,
useTopPtReweighting = opts.useTopPtReweighting,
doSystematicVariations = opts.doSystematics)
# Perform variations (e.g. for optimisation)
# builder.addVariation("METSelection.METCutValue", [100,120,140])
# builder.addVariation("AngularCutsBackToBack.workingPoint", ["Loose","Medium","Tight"])
# Build the builder
builder.build(process, allSelections)
# ================================================================================================
# Example of adding an analyzer whose configuration depends on dataVersion
# ================================================================================================
#def createAnalyzer(dataVersion):
#a = Analyzer("ExampleAnalysis")
#if dataVersion.isMC():
#a.tauPtCut = 10
#else:
#a.tauPtCut = 20
#return a
#process.addAnalyzer("test2", createAnalyzer)
# ================================================================================================
# Pick events
# ================================================================================================
#process.addOptions(EventSaver = PSet(enabled = True,pickEvents = True))
# ================================================================================================
# Run the analysis
# ================================================================================================
# Run the analysis with PROOF? By default it uses all cores, but you can give proofWorkers=<N> as a parameter
if opts.jCores:
Print("Running process with PROOF (proofWorkes=%s)" % ( str(opts.jCores) ) )
process.run(proof=True, proofWorkers=opts.jCores)
else:
Print("Running process (no PROOF)")
process.run()
def main():
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print(
"Not enough arguments passed to script execution. Printing docstring & EXIT."
)
print __doc__
sys.exit(0)
else:
pass
# ================================================================================================
# Setup the process
# ================================================================================================
maxEvents = {}
maxEvents["All"] = opts.nEvts
process = Process(prefix, postfix, maxEvents)
# ================================================================================================
# Add the datasets (according to user options)
# ================================================================================================
if (opts.includeOnlyTasks):
Print("Adding only dataset %s from multiCRAB directory %s" %
(opts.includeOnlyTasks, opts.mcrab))
process.addDatasetsFromMulticrab(
opts.mcrab, includeOnlyTasks=opts.includeOnlyTasks)
elif (opts.excludeTasks):
Print("Adding all datasets except %s from multiCRAB directory %s" %
(opts.excludeTasks, opts.mcrab))
Print(
"If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc..."
)
process.addDatasetsFromMulticrab(opts.mcrab,
excludeTasks=opts.excludeTasks)
else:
myBlackList = ["QCD_b"]
Print("Adding all datasets from multiCRAB directory %s" % (opts.mcrab))
Print(
"If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc..."
)
regex = "|".join(myBlackList)
if len(myBlackList) > 0:
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=regex)
else:
process.addDatasetsFromMulticrab(opts.mcrab)
# ================================================================================================
# Overwrite Default Settings
# ================================================================================================
from HiggsAnalysis.NtupleAnalysis.parameters.hplus2tbAnalysis import allSelections
allSelections.verbose = opts.verbose
allSelections.histogramAmbientLevel = opts.histoLevel
# allSelections.BjetSelection.triggerMatchingApply = True
# allSelections.TopSelection.ChiSqrCutValue = 100.0
# allSelections.BJetSelection.numberOfBJetsCutValue = 0
# allSelections.BJetSelection.numberOfBJetsCutDirection = "=="
# ================================================================================================
# Add Analysis Variations
# ================================================================================================
# selections = allSelections.clone()
# process.addAnalyzer(prefix, Analyzer(prefix, config=selections, silent=False) ) #trigger passed from selections
# ================================================================================================
# Command Line Options
# ================================================================================================
# from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import applyAnalysisCommandLineOptions
# applyAnalysisCommandLineOptions(sys.argv, allSelections)
#================================================================================================
# Build analysis modules
#================================================================================================
PrintOptions(opts)
builder = AnalysisBuilder(prefix,
dataEras,
searchModes,
usePUreweighting=opts.usePUreweighting,
useTopPtReweighting=opts.useTopPtReweighting,
doSystematicVariations=opts.doSystematics)
# Add variations (e.g. for optimisation)
# builder.addVariation("METSelection.METCutValue", [100,120,140])
# builder.addVariation("AngularCutsBackToBack.workingPoint", ["Loose","Medium","Tight"])
# builder.addVariation("BJetSelection.triggerMatchingApply", [False])
# builder.addVariation("TopSelection.ChiSqrCutValue", [5, 10, 15, 20])
# Build the builder
builder.build(process, allSelections)
# ================================================================================================
# Example of adding an analyzer whose configuration depends on dataVersion
# ================================================================================================
#def createAnalyzer(dataVersion):
#a = Analyzer("ExampleAnalysis")
#if dataVersion.isMC():
#a.tauPtCut = 10
#else:
#a.tauPtCut = 20
#return a
#process.addAnalyzer("test2", createAnalyzer)
# ================================================================================================
# Pick events
# ================================================================================================
#process.addOptions(EventSaver = PSet(enabled = True,pickEvents = True))
# ================================================================================================
# Run the analysis
# ================================================================================================
# Run the analysis with PROOF? You can give proofWorkers=<N> as a parameter
if opts.jCores:
Print("Running process with PROOF (proofWorkes=%s)" %
(str(opts.jCores)))
process.run(proof=True, proofWorkers=opts.jCores)
else:
Print("Running process")
process.run()
# suffix = "_%s_%s"%(algo,wp)
# print "Added analyzer for algo/wp: %s"%suffix
# process.addAnalyzer("BTagEfficiency"+suffix, Analyzer("BTagEfficiencyAnalysis", config=selections, silent=False))
# Build analysis modules
from HiggsAnalysis.NtupleAnalysis.AnalysisBuilder import AnalysisBuilder
builder = AnalysisBuilder("BTagEfficiencyAnalysis",
dataEras,
searchModes,
#### Options ####
usePUreweighting=True,
doSystematicVariations=False,
)
builder.addVariation("BJetSelection.bjetDiscr", ["pfCombinedInclusiveSecondaryVertexV2BJetTags"])
builder.addVariation("BJetSelection.bjetDiscrWorkingPoint", ["Loose", "Medium", "Tight"])
builder.build(process, allSelections)
# Example of adding an analyzer whose configuration depends on dataVersion
#def createAnalyzer(dataVersion):
#a = Analyzer("ExampleAnalysis")
#if dataVersion.isMC():
#a.tauPtCut = 10
#else:
#a.tauPtCut = 20
#return a
#process.addAnalyzer("test2", createAnalyzer)
# Pick events
#process.addOptions(EventSaver = PSet(enabled = True,pickEvents = True))
# Run the analysis
def main():
# Save start time (epoch seconds)
tStart = time.time()
Verbose("Started @ " + str(tStart), True)
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print("Not enough arguments passed to script execution. Printing docstring & EXIT.")
print __doc__
sys.exit(0)
else:
pass
# ================================================================================================
# Setup the process
# ================================================================================================
maxEvents = {}
maxEvents["All"] = opts.nEvts
process = Process(prefix, postfix, maxEvents)
# ================================================================================================
# Add the datasets (according to user options)
# ================================================================================================
if (opts.includeOnlyTasks):
Verbose("Adding only dataset %s from multiCRAB directory %s" % (opts.includeOnlyTasks, opts.mcrab))
process.addDatasetsFromMulticrab(opts.mcrab, includeOnlyTasks=opts.includeOnlyTasks)
elif (opts.excludeTasks):
Verbose("Adding all datasets except %s from multiCRAB directory %s" % (opts.excludeTasks, opts.mcrab))
Verbose("If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc...")
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=opts.excludeTasks)
else:
myBlackList = ["QCD_b"
"ChargedHiggs_HplusTB_HplusToTB_M_180_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_200_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_220_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_250_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_300_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_350_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_400_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_500_ext1",
#"ChargedHiggs_HplusTB_HplusToTB_M_650", #10M events!
"ChargedHiggs_HplusTB_HplusToTB_M_800_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_1000_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_2000_ext1"
"ChargedHiggs_HplusTB_HplusToTB_M_2500_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_3000_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_1000",
# "ChargedHiggs_HplusTB_HplusToTB_M_1500", # Speeed things up
# "ChargedHiggs_HplusTB_HplusToTB_M_2000", # Speeed things up
# "ChargedHiggs_HplusTB_HplusToTB_M_2500", # Speeed things up
# "ChargedHiggs_HplusTB_HplusToTB_M_3000", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_5000", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_7000", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_10000", # Speeed things up
]
#if opts.doSystematics:
# myBlackList.append("QCD")
Print("Adding all datasets from multiCRAB directory %s" % (opts.mcrab))
Print("If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc...")
regex = "|".join(myBlackList)
if len(myBlackList)>0:
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=regex)
else:
process.addDatasetsFromMulticrab(opts.mcrab)
# ================================================================================================
# Overwrite Default Settings
# ================================================================================================
from HiggsAnalysis.NtupleAnalysis.parameters.hplus2tbAnalysis import allSelections
allSelections.verbose = opts.verbose
allSelections.histogramAmbientLevel = opts.histoLevel
# allSelections.BjetSelection.triggerMatchingApply = True
#===============
# Trigger
#===============
allSelections.Trigger.triggerOR = ["HLT_PFHT900"]
#===============
# Jet Selection
#===============
allSelections.JetSelection.jetPtCuts = [40, 40, 40, 40]
allSelections.JetSelection.numberOfJetsCutValue = 4
allSelections.JetSelection.numberOfJetsCutDirection = ">="
allSelections.JetSelection.HTCutValue = 1000.0
allSelections.JetSelection.HTCutDirection = ">="
#===============
# Bjet Selection
#===============
allSelections.BJetSelection.jetPtCuts = [40.0]
allSelections.BJetSelection.numberOfBJetsCutValue = 1
allSelections.BJetSelection.numberOfBJetsCutDirection = "=="
#===============
# MET Selection
#===============
allSelections.METSelection.METCutValue = -1000.0
allSelections.METSelection.METCutDirection = ">"
# Study MisID vs BDT Cut
#allSelections.TopSelectionBDT.MVACutValue = 0.40
# ================================================================================================
# Add Analysis Variations
# ================================================================================================
# selections = allSelections.clone()
# process.addAnalyzer(prefix, Analyzer(prefix, config=selections, silent=False) ) #trigger passed from selections
# ================================================================================================
# Command Line Options
# ================================================================================================
# from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import applyAnalysisCommandLineOptions
# applyAnalysisCommandLineOptions(sys.argv, allSelections)
#================================================================================================
# Build analysis modules
#================================================================================================
PrintOptions(opts)
builder = AnalysisBuilder(prefix,
dataEras,
searchModes,
usePUreweighting = opts.usePUreweighting,
useTopPtReweighting = opts.useTopPtReweighting,
doSystematicVariations = opts.doSystematics,
analysisType="HToTB",
verbose=opts.verbose)
# Build the builder
builder.build(process, allSelections)
# ================================================================================================
# Example of adding an analyzer whose configuration depends on dataVersion
# ================================================================================================
#def createAnalyzer(dataVersion):
#a = Analyzer("ExampleAnalysis")
#if dataVersion.isMC():
#a.tauPtCut = 10
#else:
#a.tauPtCut = 20
#return a
#process.addAnalyzer("test2", createAnalyzer)
# ================================================================================================
# Pick events
# ================================================================================================
#process.addOptions(EventSaver = PSet(enabled = True,pickEvents = True))
# ================================================================================================
# Run the analysis
# ================================================================================================
# Run the analysis with PROOF? You can give proofWorkers=<N> as a parameter
if opts.jCores:
Print("Running process with PROOF (proofWorkes=%s)" % ( str(opts.jCores) ) )
process.run(proof=True, proofWorkers=opts.jCores)
else:
Verbose("Running process")
process.run()
# Print total time elapsed
tFinish = time.time()
dt = int(tFinish) - int(tStart)
days = divmod(dt,86400) # days
hours = divmod(days[1],3600) # hours
mins = divmod(hours[1],60) # minutes
secs = mins[1] # seconds
Print("Total elapsed time is %s days, %s hours, %s mins, %s secs" % (days[0], hours[0], mins[0], secs), True)
return
def main():
# Save start time (epoch seconds)
tStart = time.time()
Verbose("Started @ " + str(tStart), True)
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print(
"Not enough arguments passed to script execution. Printing docstring & EXIT."
)
print __doc__
sys.exit(0)
else:
pass
# ================================================================================================
# Setup the process
# ================================================================================================
completeList = GetDatasetCompleteList()
whiteList = GetDatasetWhitelist(opts)
blackList = GetDatasetBlackList(completeList, whiteList)
maxEvents = {}
for d in whiteList:
#maxEvents[d] = 100
maxEvents[d] = -1
process = Process(prefix, postfix, maxEvents)
# ================================================================================================
# Add the datasets (according to user options)
# ================================================================================================
if (opts.includeOnlyTasks):
Print("Adding only dataset %s from multiCRAB directory %s" %
(opts.includeOnlyTasks, opts.mcrab))
process.addDatasetsFromMulticrab(
opts.mcrab, includeOnlyTasks=opts.includeOnlyTasks)
elif (opts.excludeTasks):
Print("Adding all datasets except %s from multiCRAB directory %s" %
(opts.excludeTasks, opts.mcrab))
Print(
"If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc..."
)
process.addDatasetsFromMulticrab(opts.mcrab,
excludeTasks=opts.excludeTasks)
else:
myBlackList = []
myBlackList.extend(blackList)
Verbose("Adding all datasets from multiCRAB directory %s" %
(opts.mcrab))
Verbose(
"If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc..."
)
regex = "|".join(myBlackList)
if len(whiteList) > 0:
process.addDatasetsFromMulticrab(
opts.mcrab, includeOnlyTasks="|".join(whiteList))
elif len(myBlackList) > 0:
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=regex)
else:
process.addDatasetsFromMulticrab(opts.mcrab)
# ================================================================================================
# Overwrite Default Settings
# ================================================================================================
from HiggsAnalysis.NtupleAnalysis.parameters.jetTriggers import allSelections
allSelections.verbose = opts.verbose
allSelections.histogramAmbientLevel = opts.histoLevel
#==========================
# Systematics selections
#==========================
# MET
allSelections.METSelection.METCutValue = 50.0
# Muon
allSelections.MuonSelection.muonPtCut = 30
# Jets
allSelections.JetSelection.numberOfJetsCutValue = 4
allSelections.JetSelection.jetPtCuts = [40.0, 40.0, 40.0, 30.0]
# Triggers
allSelections.Trigger.triggerOR = ["HLT_Mu50"]
# Bjets
allSelections.BJetSelection.jetPtCuts = [40.0, 30.0]
allSelections.BJetSelection.numberOfBJetsCutValue = 2
# allSelections.BjetSelection.triggerMatchingApply = True
# allSelections.TopSelection.ChiSqrCutValue = 100.0
# allSelections.BJetSelection.numberOfBJetsCutValue = 0
# allSelections.BJetSelection.numberOfBJetsCutDirection = "=="
# ================================================================================================
# Add Analysis Variations
# ================================================================================================
# selections = allSelections.clone()
# process.addAnalyzer(prefix, Analyzer(prefix, config=selections, silent=False) ) #trigger passed from selections
# ================================================================================================
# Command Line Options
# ================================================================================================
# from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import applyAnalysisCommandLineOptions
# applyAnalysisCommandLineOptions(sys.argv, allSelections)
#================================================================================================
# Build analysis modules
#================================================================================================
PrintOptions(opts)
builder = AnalysisBuilder(prefix,
dataEras,
searchModes,
usePUreweighting=opts.usePUreweighting,
useTopPtReweighting=opts.useTopPtReweighting,
doSystematicVariations=opts.doSystematics,
analysisType="HToTB")
# Add variations (e.g. for optimisation)
# builder.addVariation("METSelection.METCutValue", [100,120,140])
# builder.addVariation("AngularCutsBackToBack.workingPoint", ["Loose","Medium","Tight"])
# builder.addVariation("BJetSelection.triggerMatchingApply", [False])
# builder.addVariation("TopSelection.ChiSqrCutValue", [5, 10, 15, 20])
# Build the builder
builder.build(process, allSelections)
# ================================================================================================
# Example of adding an analyzer whose configuration depends on dataVersion
# ================================================================================================
#def createAnalyzer(dataVersion):
#a = Analyzer("ExampleAnalysis")
#if dataVersion.isMC():
#a.tauPtCut = 10
#else:
#a.tauPtCut = 20
#return a
#process.addAnalyzer("test2", createAnalyzer)
# ================================================================================================
# Pick events
# ================================================================================================
#process.addOptions(EventSaver = PSet(enabled = True,pickEvents = True))
# ================================================================================================
# Run the analysis
# ================================================================================================
# Run the analysis with PROOF? You can give proofWorkers=<N> as a parameter
if opts.jCores:
Print("Running process with PROOF (proofWorkes=%s)" %
(str(opts.jCores)))
process.run(proof=True, proofWorkers=opts.jCores)
else:
Print("Running process")
process.run()
# Print total time elapsed
tFinish = time.time()
dt = int(tFinish) - int(tStart)
days = divmod(dt, 86400) # days
hours = divmod(days[1], 3600) # hours
mins = divmod(hours[1], 60) # minutes
secs = mins[1] # seconds
Print(
"Total elapsed time is %s days, %s hours, %s mins, %s secs" %
(days[0], hours[0], mins[0], secs), True)
return
def main():
# Save start time (epoch seconds)
tStart = time.time()
Verbose("Started @ " + str(tStart), True)
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print("Not enough arguments passed to script execution. Printing docstring & EXIT.")
print __doc__
sys.exit(0)
else:
pass
# ================================================================================================
# Setup the process
# ================================================================================================
maxEvents = {}
maxEvents["All"] = opts.nEvts
process = Process(prefix, postfix, maxEvents)
# ================================================================================================
# Add the datasets (according to user options)
# ================================================================================================
if (opts.includeOnlyTasks):
Print("Adding only dataset %s from multiCRAB directory %s" % (opts.includeOnlyTasks, opts.mcrab))
process.addDatasetsFromMulticrab(opts.mcrab, includeOnlyTasks=opts.includeOnlyTasks)
elif (opts.excludeTasks):
Print("Adding all datasets except %s from multiCRAB directory %s" % (opts.excludeTasks, opts.mcrab))
Print("If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc...")
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=opts.excludeTasks)
else:
myBlackList = ["QCD_b"
"ChargedHiggs_HplusTB_HplusToTB_M_180_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_200_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_220_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_250_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_300_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_350_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_400_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_500_ext1",
#"ChargedHiggs_HplusTB_HplusToTB_M_650", #10M events!
"ChargedHiggs_HplusTB_HplusToTB_M_800_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_1000_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_2000_ext1"
"ChargedHiggs_HplusTB_HplusToTB_M_2500_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_3000_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_1000",
"ChargedHiggs_HplusTB_HplusToTB_M_1500", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_2000", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_2500", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_3000", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_5000", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_7000", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_10000", # Speeed things up
]
if opts.doSystematics:
myBlackList.append("QCD")
Print("Adding all datasets from multiCRAB directory %s" % (opts.mcrab))
Print("If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc...")
regex = "|".join(myBlackList)
if len(myBlackList)>0:
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=regex)
else:
process.addDatasetsFromMulticrab(opts.mcrab)
# ================================================================================================
# Overwrite Default Settings
# ================================================================================================
from HiggsAnalysis.NtupleAnalysis.parameters.jetTriggers import allSelections
from HiggsAnalysis.NtupleAnalysis.main import PSet
import HiggsAnalysis.NtupleAnalysis.parameters.scaleFactors as scaleFactors
allSelections.verbose = opts.verbose
allSelections.histogramAmbientLevel = opts.histoLevel
#==========================
# Systematics selections
#==========================
# BDT MisID SF
MisIDSF = PSet(
MisIDSFJsonName = "Efficiency_SystBDT_CR2_MET50_MuIso0p1_InvMET20_InvMuIso0p1.json", # For Fake TT: CR1, qcd+ewk+st CR2
ApplyMisIDSF = False,
)
scaleFactors.assignMisIDSF(MisIDSF, "nominal", MisIDSF.MisIDSFJsonName)
allSelections.MisIDSF = MisIDSF
allSelections.SystTopBDTSelection.MiniIsoCutValue = 0.1
allSelections.SystTopBDTSelection.MiniIsoInvCutValue = 0.1
allSelections.SystTopBDTSelection.METCutValue = 50.0
allSelections.SystTopBDTSelection.METInvCutValue = 20.0
# Muon
allSelections.MuonSelection.muonPtCut = 30
# Jets
allSelections.JetSelection.numberOfJetsCutValue = 4
allSelections.JetSelection.jetPtCuts = [40.0, 40.0, 40.0, 30.0]
# Trigger
allSelections.Trigger.triggerOR = ["HLT_Mu50"]
# Bjets
allSelections.BJetSelection.jetPtCuts = [40.0, 30.0]
allSelections.BJetSelection.numberOfBJetsCutValue = 2
# ================================================================================================
# Add Analysis Variations
# ================================================================================================
# selections = allSelections.clone()
# process.addAnalyzer(prefix, Analyzer(prefix, config=selections, silent=False) ) #trigger passed from selections
# ================================================================================================
# Command Line Options
# ================================================================================================
# from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import applyAnalysisCommandLineOptions
# applyAnalysisCommandLineOptions(sys.argv, allSelections)
#================================================================================================
# Build analysis modules
#================================================================================================
PrintOptions(opts)
builder = AnalysisBuilder(prefix,
dataEras,
searchModes,
usePUreweighting = opts.usePUreweighting,
useTopPtReweighting = opts.useTopPtReweighting,
doSystematicVariations = opts.doSystematics,
analysisType="HToTB")
# Add variations (e.g. for optimisation)
# builder.addVariation("METSelection.METCutValue", [100,120,140])
# builder.addVariation("AngularCutsBackToBack.workingPoint", ["Loose","Medium","Tight"])
# builder.addVariation("BJetSelection.triggerMatchingApply", [False])
# builder.addVariation("TopSelection.ChiSqrCutValue", [5, 10, 15, 20])
# Build the builder
builder.build(process, allSelections)
# ================================================================================================
# Example of adding an analyzer whose configuration depends on dataVersion
# ================================================================================================
#def createAnalyzer(dataVersion):
#a = Analyzer("ExampleAnalysis")
#if dataVersion.isMC():
#a.tauPtCut = 10
#else:
#a.tauPtCut = 20
#return a
#process.addAnalyzer("test2", createAnalyzer)
# ================================================================================================
# Pick events
# ================================================================================================
#process.addOptions(EventSaver = PSet(enabled = True,pickEvents = True))
# ================================================================================================
# Run the analysis
# ================================================================================================
# Run the analysis with PROOF? You can give proofWorkers=<N> as a parameter
if opts.jCores:
Print("Running process with PROOF (proofWorkes=%s)" % ( str(opts.jCores) ) )
process.run(proof=True, proofWorkers=opts.jCores)
else:
Print("Running process")
process.run()
# Print total time elapsed
tFinish = time.time()
dt = int(tFinish) - int(tStart)
days = divmod(dt,86400) # days
hours = divmod(days[1],3600) # hours
mins = divmod(hours[1],60) # minutes
secs = mins[1] # seconds
Print("Total elapsed time is %s days, %s hours, %s mins, %s secs" % (days[0], hours[0], mins[0], secs), True)
return
def main():
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print("Not enough arguments passed to script execution. Printing docstring & EXIT.")
print __doc__
sys.exit(0)
else:
pass
# ================================================================================================
# Setup the process
# ================================================================================================
maxEvents = {}
maxEvents["All"] = opts.nEvts
# maxEvents["2016"] = 1
# maxEvents["ZZTo4Q"] = -1
# maxEvents["ZJetsToQQ_HT600toInf"] = 1
# maxEvents["WZ_ext1"] = 1
# maxEvents["WZ"] = 1
# maxEvents["WWTo4Q"] = 1
# maxEvents["WJetsToQQ_HT_600ToInf"] = 1
# maxEvents["TTZToQQ"] = 1
# maxEvents["TTWJetsToQQ"] = 1
# maxEvents["TTTT"] = 1
# maxEvents["TT"] = 1
# maxEvents["ST_t_channel_top_4f_inclusiveDecays"] = 1
# maxEvents["ST_t_channel_antitop_4f_inclusiveDecays"] = 1
# maxEvents["ST_tW_top_5f_inclusiveDecays_ext1"] = 1
# maxEvents["ST_tW_top_5f_inclusiveDecays"] = 1
# maxEvents["ST_tW_antitop_5f_inclusiveDecays_ext1"] = 1
# maxEvents["ST_tW_antitop_5f_inclusiveDecays"] = 1
# maxEvents["ST_s_channel_4f_InclusiveDecays"] = 1
# maxEvents["QCD_HT700to1000_ext1"] = 1
# maxEvents["QCD_HT700to1000"] = 1
# maxEvents["QCD_HT50to100"] = 1
# maxEvents["QCD_HT500to700_ext1"] = 1
# maxEvents["QCD_HT500to700"] = 1
# maxEvents["QCD_HT300to500_ext1"] = 1
# maxEvents["QCD_HT300to500"] = 1
# maxEvents["QCD_HT200to300_ext1"] = 1
# maxEvents["QCD_HT200to300"] = 1
# maxEvents["QCD_HT2000toInf_ext1"] = 1
# maxEvents["QCD_HT2000toInf"] = 1
# maxEvents["QCD_HT1500to2000_ext1"] = 1
# maxEvents["QCD_HT1500to2000"] = 1
# maxEvents["QCD_HT100to200"] = 1
# maxEvents["QCD_HT1000to1500_ext1"] = 1
# maxEvents["QCD_HT1000to1500"] = 1
# maxEvents["JetHT_Run2016H_03Feb2017_ver3_v1_284036_284044"] = 1
# maxEvents["JetHT_Run2016H_03Feb2017_ver2_v1_281613_284035"] = 1
# maxEvents["JetHT_Run2016G_03Feb2017_v1_278820_280385"] = 1
# maxEvents["JetHT_Run2016F_03Feb2017_v1_278801_278808"] = 1
# maxEvents["JetHT_Run2016F_03Feb2017_v1_277932_278800"] = 1
# maxEvents["JetHT_Run2016E_03Feb2017_v1_276831_277420"] = 1
# maxEvents["JetHT_Run2016D_03Feb2017_v1_276315_276811"] = 1
# maxEvents["JetHT_Run2016C_03Feb2017_v1_275656_276283"] = 1
# maxEvents["JetHT_Run2016B_03Feb2017_ver2_v2_273150_275376"] = 1
# maxEvents["DYJetsToQQ_HT180"] = 1
# maxEvents["ChargedHiggs_HplusTB_HplusToTB_M_500"] = 1
process = Process(prefix, postfix, maxEvents)
# ================================================================================================
# Add the datasets (according to user options)
# ================================================================================================
if (opts.includeOnlyTasks):
Print("Adding only dataset %s from multiCRAB directory %s" % (opts.includeOnlyTasks, opts.mcrab))
process.addDatasetsFromMulticrab(opts.mcrab, includeOnlyTasks=opts.includeOnlyTasks)
elif (opts.excludeTasks):
Print("Adding all datasets except %s from multiCRAB directory %s" % (opts.excludeTasks, opts.mcrab))
Print("If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc...")
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=opts.excludeTasks)
else:
myBlackList = ["M_1500", "M_2000", "M_2500", "M_3000", "M_5000", "M_7000", "M_10000", "QCD"]
Print("Adding all datasets from multiCRAB directory %s except %s" % (opts.mcrab, (",".join(myBlackList))) )
Print("Vertex reweighting is done according to the chosen data era (%s)" % (",".join(dataEras)) )
# process.addDatasetsFromMulticrab(opts.mcrab, blacklist=myBlackList)
if len(myBlackList) > 0:
regex = "|".join(myBlackList)
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=regex)
else:
process.addDatasetsFromMulticrab(opts.mcrab)
# ================================================================================================
# Overwrite Default Settings
# ================================================================================================
from HiggsAnalysis.NtupleAnalysis.parameters.hplus2tbAnalysis import allSelections
allSelections.verbose = opts.verbose
allSelections.histogramAmbientLevel = opts.histoLevel
# Set splitting of phase-space (first bin is below first edge value and last bin is above last edge value)
allSelections.CommonPlots.histogramSplitting = [
#PSet(label="TetrajetBjetPt" , binLowEdges=[40, 60, 100, 200, 300], useAbsoluteValues=False), # pT < 40, pT=40-60, pT=60-100, pT=100-200, pT > 200
PSet(label="TetrajetBjetEta", binLowEdges=[-1.8, -1.2, -0.4, 0.0, 0.4, 1.2, 1.8], useAbsoluteValues=False),
#PSet(label="TetrajetBjetEta", binLowEdges=[0.4, 1.2, 1.8], useAbsoluteValues=True), #|eta| < 0.4, 0.4 < |eta| < 1.2, 1.2 < |eta| < 1.8, |eta| > 1.8,
#PSet(label="TetrajetBjetEta", binLowEdges=[0.4, 1.2], useAbsoluteValues=True),
#PSet(label="TetrajetBjetEta", binLowEdges=[1.2], useAbsoluteValues=True),
#PSet(label="TetrajetBjetEta", binLowEdges=[1.3], useAbsoluteValues=True), # good but perhaps limit to 1.2
#PSet(label="TetrajetBjetEta", binLowEdges=[0.6, 1.4], useAbsoluteValues=True), #middle bin is bad
]
# allSelections.BJetSelection.triggerMatchingApply = True # at least 1 trg b-jet matched to offline b-jets
# allSelections.Trigger.triggerOR = ["HLT_PFHT400_SixJet30_DoubleBTagCSV_p056"]
# allSelections.Trigger.triggerOR = ["HLT_PFHT450_SixJet40_BTagCSV_p056"]
# ================================================================================================
# Command Line Options
# ================================================================================================
# from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import applyAnalysisCommandLineOptions
# applyAnalysisCommandLineOptions(sys.argv, allSelections)
# ================================================================================================
# Build analysis modules
# ================================================================================================
PrintOptions(opts)
builder = AnalysisBuilder(prefix,
dataEras,
searchModes,
usePUreweighting = opts.usePUreweighting,
useTopPtReweighting = opts.useTopPtReweighting,
doSystematicVariations = opts.doSystematics)
# Add variations (e.g. for optimisation)
# builder.addVariation("BJetSelection.triggerMatchingApply", [True, False]) # At least 1 trg b-jet dR-matched to offline b-jets
# builder.addVariation("FakeBMeasurement.prelimTopFitChiSqrCutValue", [100, 20])
# builder.addVariation("FakeBMeasurement.prelimTopFitChiSqrCutDirection", ["<=", "==", ">="])
# builder.addVariation("FakeBMeasurement.numberOfBJetsCutValue", [0, 1])
# builder.addVariation("FakeBMeasurement.numberOfBJetsCutDirection", ["=="])
# builder.addVariation("FakeBMeasurement.numberOfBJetsCutDirection", ["<=", "==", ">="])
# builder.addVariation("FakeBMeasurement.numberOfInvertedBJetsCutValue", [0, 1])
# builder.addVariation("FakeBMeasurement.numberOfInvertedBJetsCutDirection", [">="])
# builder.addVariation("FakeBMeasurement.invertedBJetDiscr", "")
# builder.addVariation("FakeBMeasurement.invertedBJetDiscrWorkingPoint", "Loose")
# builder.addVariation("FakeBMeasurement.invertedBJetsSortType", ["Random", "DescendingBDiscriminator"])
# builder.addVariation("FakeBMeasurement.invertedBJetsDiscrMaxCutValue", [0.82, 0.80, 0.75, 0.70])
# builder.addVariation("TopSelection.ChiSqrCutValue", [100])
# builder.addVariation("Trigger.triggerOR", [["HLT_PFHT450_SixJet40"], ["HLT_PFHT400_SixJet30"]])
# builder.addVariation("TopologySelection.FoxWolframMomentCutValue", [0.5, 0.7])
# builder.addVariation("Trigger.triggerOR", [["HLT_PFHT400_SixJet30_DoubleBTagCSV_p056"], ["HLT_PFHT450_SixJet40_BTagCSV_p056"]])
# builder.addVariation("Trigger.triggerOR", [["HLT_PFHT400_SixJet30_DoubleBTagCSV_p056", "HLT_PFHT450_SixJet40_BTagCSV_p056"]])
# Build the builder
builder.build(process, allSelections)
# ================================================================================================
# Example of adding an analyzer whose configuration depends on dataVersion
# ================================================================================================
# def createAnalyzer(dataVersion):
# a = Analyzer("ExampleAnalysis")
# if dataVersion.isMC():
# a.tauPtCut = 10
# else:
# a.tauPtCut = 20
# return a
# process.addAnalyzer("test2", createAnalyzer)
# ================================================================================================
# Pick events
# ================================================================================================
# process.addOptions(EventSaver = PSet(enabled = True,pickEvents = True))
# ================================================================================================
# Run the analysis
# ================================================================================================
# Run the analysis with PROOF? You can give proofWorkers=<N> as a parameter
if opts.jCores:
Print("Running process with PROOF (proofWorkes=%s)" % ( str(opts.jCores) ) )
process.run(proof=True, proofWorkers=opts.jCores)
else:
Print("Running process (no PROOF)")
process.run()
return
def main():
# Save start time (epoch seconds)
tStart = time.time()
Verbose("Started @ " + str(tStart), True)
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print("Not enough arguments passed to script execution. Printing docstring & EXIT.")
print __doc__
sys.exit(0)
else:
pass
# ================================================================================================
# Setup the process
# ================================================================================================
maxEvents = {}
maxEvents["All"] = opts.nEvts
# maxEvents["2016"] = 1
# maxEvents["ZZTo4Q"] = -1
# maxEvents["ZJetsToQQ_HT600toInf"] = 1
# maxEvents["WZ_ext1"] = 1
# maxEvents["WZ"] = 1
# maxEvents["WWTo4Q"] = 1
# maxEvents["WJetsToQQ_HT_600ToInf"] = 1
# maxEvents["TTZToQQ"] = 1
# maxEvents["TTWJetsToQQ"] = 1
# maxEvents["TTTT"] = 1
# maxEvents["TT"] = 1
# maxEvents["ST_t_channel_top_4f_inclusiveDecays"] = 1
# maxEvents["ST_t_channel_antitop_4f_inclusiveDecays"] = 1
# maxEvents["ST_tW_top_5f_inclusiveDecays_ext1"] = 1
# maxEvents["ST_tW_top_5f_inclusiveDecays"] = 1
# maxEvents["ST_tW_antitop_5f_inclusiveDecays_ext1"] = 1
# maxEvents["ST_tW_antitop_5f_inclusiveDecays"] = 1
# maxEvents["ST_s_channel_4f_InclusiveDecays"] = 1
# maxEvents["QCD_HT700to1000_ext1"] = 1
# maxEvents["QCD_HT700to1000"] = 1
# maxEvents["QCD_HT50to100"] = 1
# maxEvents["QCD_HT500to700_ext1"] = 1
# maxEvents["QCD_HT500to700"] = 1
# maxEvents["QCD_HT300to500_ext1"] = 1
# maxEvents["QCD_HT300to500"] = 1
# maxEvents["QCD_HT200to300_ext1"] = 1
# maxEvents["QCD_HT200to300"] = 1
# maxEvents["QCD_HT2000toInf_ext1"] = 1
# maxEvents["QCD_HT2000toInf"] = 1
# maxEvents["QCD_HT1500to2000_ext1"] = 1
# maxEvents["QCD_HT1500to2000"] = 1
# maxEvents["QCD_HT100to200"] = 1
# maxEvents["QCD_HT1000to1500_ext1"] = 1
# maxEvents["QCD_HT1000to1500"] = 1
# maxEvents["JetHT_Run2016H_03Feb2017_ver3_v1_284036_284044"] = 1
# maxEvents["JetHT_Run2016H_03Feb2017_ver2_v1_281613_284035"] = 1
# maxEvents["JetHT_Run2016G_03Feb2017_v1_278820_280385"] = 1
# maxEvents["JetHT_Run2016F_03Feb2017_v1_278801_278808"] = 1
# maxEvents["JetHT_Run2016F_03Feb2017_v1_277932_278800"] = 1
# maxEvents["JetHT_Run2016E_03Feb2017_v1_276831_277420"] = 1
# maxEvents["JetHT_Run2016D_03Feb2017_v1_276315_276811"] = 1
# maxEvents["JetHT_Run2016C_03Feb2017_v1_275656_276283"] = 1
# maxEvents["JetHT_Run2016B_03Feb2017_ver2_v2_273150_275376"] = 1
# maxEvents["DYJetsToQQ_HT180"] = 1
# maxEvents["ChargedHiggs_HplusTB_HplusToTB_M_500"] = 1
process = Process(prefix, postfix, maxEvents)
# ================================================================================================
# Add the datasets (according to user options)
# ================================================================================================
if (opts.includeOnlyTasks):
Verbose("Adding only dataset %s from multiCRAB directory %s" % (opts.includeOnlyTasks, opts.mcrab))
process.addDatasetsFromMulticrab(opts.mcrab, includeOnlyTasks=opts.includeOnlyTasks)
elif (opts.excludeTasks):
Verbose("Adding all datasets except %s from multiCRAB directory %s" % (opts.excludeTasks, opts.mcrab))
Print("If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc...")
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=opts.excludeTasks)
else:
myBlackList = ["M_180", "M_200" , "M_220" , "M_250" , "M_300" , "M_350" , "M_400" , "M_500" , "M_650",
"M_800", "M_1000", "M_1500", "M_2000", "M_2500", "M_3000", "M_5000", "M_7000", "M_10000", "QCD_b"]
Verbose("Adding all datasets from multiCRAB directory %s except %s" % (opts.mcrab, (",".join(myBlackList))) )
Verbose("Vertex reweighting is done according to the chosen data era (%s)" % (",".join(dataEras)) )
# process.addDatasetsFromMulticrab(opts.mcrab, blacklist=myBlackList)
if len(myBlackList) > 0:
regex = "|".join(myBlackList)
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=regex)
else:
process.addDatasetsFromMulticrab(opts.mcrab)
# ================================================================================================
# Overwrite Default Settings
# ================================================================================================
from HiggsAnalysis.NtupleAnalysis.parameters.hplus2tbAnalysis import allSelections
allSelections.verbose = opts.verbose
allSelections.histogramAmbientLevel = opts.histoLevel
# Set splitting of phase-space (first bin is below first edge value and last bin is above last edge value)
allSelections.CommonPlots.histogramSplitting = [
PSet(label="TetrajetBjetPt" , binLowEdges=[60, 90, 160, 300], useAbsoluteValues=False), # Final
PSet(label="TetrajetBjetEta", binLowEdges=[0.8, 1.4, 2.0], useAbsoluteValues=True), # Final
#
# PSet(label="TetrajsetBjetPt", binLowEdges=[60, 100, 150], useAbsoluteValues=False),
# PSet(label="TetrajsetBjetPt", binLowEdges=[60, 150], useAbsoluteValues=False),
# PSet(label="TetrajsetBjetPt", binLowEdges=[55, 110], useAbsoluteValues=False),
# PSet(label="TetrajetBjetEta", binLowEdges=[0.8, 1.6], useAbsoluteValues=True),
# PSet(label="TetrajetBjetEta", binLowEdges=[0.4, 0.8, 1.6, 2.0, 2.2], useAbsoluteValues=True), #AN v4
]
# Overwrite values
# allSelections.TopSelectionBDT.CSV_bDiscCutDirection = ">="
allSelections.TopSelectionBDT.CSV_bDiscCutValue = 0.54 # allow CSVv2-L for inverted top
# Testing
if 0:
msg = "WARNING! This is a simple testing of the FakeB measurement with only 1 CSVv2-M. Disable once done!"
Print(ShellStyles.ErrorStyle() + msg + ShellStyles.NormalStyle(), True)
allSelections.FakeBMeasurement.baselineBJetsCutValue = 0 #1
allSelections.FakeBMeasurement.baselineBJetsCutDirection = "=="
# ================================================================================================
# Command Line Options
# ================================================================================================
# from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import applyAnalysisCommandLineOptions
# applyAnalysisCommandLineOptions(sys.argv, allSelections)
# ================================================================================================
# Build analysis modules
# ================================================================================================
PrintOptions(opts)
builder = AnalysisBuilder(prefix,
dataEras,
searchModes,
usePUreweighting = opts.usePUreweighting,
useTopPtReweighting = opts.useTopPtReweighting,
doSystematicVariations = opts.doSystematics,
analysisType="HToTB",
verbose=opts.verbose)
# Add variations (e.g. for optimisation)
# builder.addVariation("BJetSelection.triggerMatchingApply", [True, False]) # At least 1 trg b-jet dR-matched to offline b-jets
# builder.addVariation("FakeBMeasurement.prelimTopFitChiSqrCutValue", [100, 20])
# builder.addVariation("FakeBMeasurement.prelimTopFitChiSqrCutDirection", ["<=", "==", ">="])
# builder.addVariation("FakeBMeasurement.numberOfBJetsCutValue", [0, 1])
# builder.addVariation("FakeBMeasurement.numberOfBJetsCutDirection", ["=="])
# builder.addVariation("FakeBMeasurement.numberOfBJetsCutDirection", ["<=", "==", ">="])
# builder.addVariation("FakeBMeasurement.numberOfInvertedBJetsCutValue", [0, 1])
# builder.addVariation("FakeBMeasurement.numberOfInvertedBJetsCutDirection", [">="])
# builder.addVariation("FakeBMeasurement.invertedBJetDiscr", "")
# builder.addVariation("FakeBMeasurement.invertedBJetDiscrWorkingPoint", "Loose")
# builder.addVariation("FakeBMeasurement.invertedBJetsSortType", ["Random", "DescendingBDiscriminator"])
# builder.addVariation("FakeBMeasurement.invertedBJetsDiscrMaxCutValue", [0.82, 0.80, 0.75, 0.70])
# builder.addVariation("TopSelection.ChiSqrCutValue", [100])
# builder.addVariation("Trigger.triggerOR", [["HLT_PFHT450_SixJet40"], ["HLT_PFHT400_SixJet30"]])
# builder.addVariation("TopologySelection.FoxWolframMomentCutValue", [0.5, 0.7])
# builder.addVariation("Trigger.triggerOR", [["HLT_PFHT400_SixJet30_DoubleBTagCSV_p056"], ["HLT_PFHT450_SixJet40_BTagCSV_p056"]])
# builder.addVariation("Trigger.triggerOR", [["HLT_PFHT400_SixJet30_DoubleBTagCSV_p056", "HLT_PFHT450_SixJet40_BTagCSV_p056"]])
# Build the builder
builder.build(process, allSelections)
# ================================================================================================
# Example of adding an analyzer whose configuration depends on dataVersion
# ================================================================================================
# def createAnalyzer(dataVersion):
# a = Analyzer("ExampleAnalysis")
# if dataVersion.isMC():
# a.tauPtCut = 10
# else:
# a.tauPtCut = 20
# return a
# process.addAnalyzer("test2", createAnalyzer)
# ================================================================================================
# Pick events
# ================================================================================================
# process.addOptions(EventSaver = PSet(enabled = True,pickEvents = True))
# ================================================================================================
# Run the analysis
# ================================================================================================
# Run the analysis with PROOF? You can give proofWorkers=<N> as a parameter
if opts.jCores:
Print("Running process with PROOF (proofWorkes=%s)" % ( str(opts.jCores) ) )
process.run(proof=True, proofWorkers=opts.jCores)
else:
Print("Running process (no PROOF)")
process.run()
# Print total time elapsed
tFinish = time.time()
dt = int(tFinish) - int(tStart)
days = divmod(dt,86400) # days
hours = divmod(days[1],3600) # hours
mins = divmod(hours[1],60) # minutes
secs = mins[1] # seconds
Print("Total elapsed time is %s days, %s hours, %s mins, %s secs" % (days[0], hours[0], mins[0], secs), True)
return
def main():
# Save start time (epoch seconds)
tStart = time.time()
Verbose("Started @ " + str(tStart), True)
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print(
"Not enough arguments passed to script execution. Printing docstring & EXIT."
)
print __doc__
sys.exit(0)
else:
pass
# ================================================================================================
# Setup the process
# ================================================================================================
completeList = GetDatasetCompleteList()
whiteList = GetDatasetWhitelist(opts)
blackList = GetDatasetBlackList(completeList, whiteList)
maxEvents = {}
for d in whiteList:
maxEvents[d] = -1
#if d == "ChargedHiggs_HplusTB_HplusToTB_M_650":
# maxEvents[d] = 4000000
process = Process(prefix, postfix, maxEvents)
# ================================================================================================
# Add the datasets (according to user options)
# ================================================================================================
if (opts.includeOnlyTasks):
Verbose("Adding only dataset %s from multiCRAB directory %s" %
(opts.includeOnlyTasks, opts.mcrab))
process.addDatasetsFromMulticrab(
opts.mcrab, includeOnlyTasks=opts.includeOnlyTasks)
elif (opts.excludeTasks):
Verbose("Adding all datasets except %s from multiCRAB directory %s" %
(opts.excludeTasks, opts.mcrab))
Print(
"If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc..."
)
process.addDatasetsFromMulticrab(opts.mcrab,
excludeTasks=opts.excludeTasks)
else:
myBlackList = blackList
#myBlackList = ["M_180", "M_200" , "M_220" , "M_250" , "M_300" , "M_350" , "M_400" , "M_500" , "M_650",
# "M_800", "M_1000", "M_1500", "M_2000", "M_2500", "M_3000", "M_5000", "M_7000", "M_10000"]
# Extend the blacklist with datasets not in the group
#myBlackList.extend(blackList)
Verbose("Adding all datasets from multiCRAB directory %s except %s" %
(opts.mcrab, (",".join(myBlackList))))
Verbose(
"Vertex reweighting is done according to the chosen data era (%s)"
% (",".join(dataEras)))
regex = "|".join(myBlackList)
if len(myBlackList) > 0:
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=regex)
else:
process.addDatasetsFromMulticrab(opts.mcrab)
# ================================================================================================
# Overwrite Default Settings
# ================================================================================================
from HiggsAnalysis.NtupleAnalysis.parameters.hplus2tbAnalysis import allSelections
allSelections.verbose = opts.verbose
allSelections.histogramAmbientLevel = opts.histoLevel
# Set splitting of phase-space (first bin is below first edge value and last bin is above last edge value)
allSelections.CommonPlots.histogramSplitting = [
# PSet(label="TetrajetBjetPt" , binLowEdges=[50, 160, 300], useAbsoluteValues=False), # last (not bad)
# PSet(label="TetrajetBjetPt" , binLowEdges=[50, 120, 300], useAbsoluteValues=False), # last (not bad)
#PSet(label="TetrajetBjetPt" , binLowEdges=[50, 150, 300], useAbsoluteValues=False), # last (quite good)
# PSet(label="TetrajetBjetPt" , binLowEdges=[50, 60, 150], useAbsoluteValues=False),
# PSet(label="TetrajetBjetPt" , binLowEdges=[60, 90, 160, 300], useAbsoluteValues=False), # BEST (v1)
# PSet(label="TetrajetBjetPt" , binLowEdges=[50, 60, 90, 160, 330], useAbsoluteValues=False),
PSet(label="TetrajetBjetPt",
binLowEdges=[60, 90, 160, 300],
useAbsoluteValues=False), # BEST (v2)
#PSet(label="TetrajetBjetPt" , binLowEdges=[60, 90, 160, 300], useAbsoluteValues=False), # BEST (v3)
# PSet(label="TetrajetBjetPt" , binLowEdges=[50, 65, 130, 330], useAbsoluteValues=False), # BEST (v4)
# PSet(label="TetrajetBjetPt" , binLowEdges=[50, 65, 95, 130, 330], useAbsoluteValues=False), # BEST (v5)
# PSet(label="TetrajetBjetPt" , binLowEdges=[45, 50, 60, 90, 160, 330], useAbsoluteValues=False), # BEST (v5)
#
PSet(label="TetrajetBjetEta",
binLowEdges=[0.8, 1.4, 2.0],
useAbsoluteValues=True), # optimised
]
# Overwrite values
# allSelections.TopSelectionBDT.CSV_bDiscCutDirection = ">="
allSelections.TopSelectionBDT.CSV_bDiscCutValue = 0.54 # allow CSVv2-L for inverted top
# ================================================================================================
# Command Line Options
# ================================================================================================
# from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import applyAnalysisCommandLineOptions
# applyAnalysisCommandLineOptions(sys.argv, allSelections)
# ================================================================================================
# Build analysis modules
# ================================================================================================
PrintOptions(opts)
builder = AnalysisBuilder(prefix,
dataEras,
searchModes,
usePUreweighting=opts.usePUreweighting,
useTopPtReweighting=opts.useTopPtReweighting,
doSystematicVariations=opts.doSystematics,
analysisType="HToTB",
verbose=opts.verbose,
systVarsList=opts.systVarsList)
# Add variations (e.g. for optimisation)
# builder.addVariation("BJetSelection.triggerMatchingApply", [True, False]) # At least 1 trg b-jet dR-matched to offline b-jets
# builder.addVariation("FakeBMeasurement.prelimTopFitChiSqrCutValue", [100, 20])
# builder.addVariation("FakeBMeasurement.prelimTopFitChiSqrCutDirection", ["<=", "==", ">="])
# builder.addVariation("FakeBMeasurement.numberOfBJetsCutValue", [0, 1])
# builder.addVariation("FakeBMeasurement.numberOfBJetsCutDirection", ["=="])
# builder.addVariation("FakeBMeasurement.numberOfBJetsCutDirection", ["<=", "==", ">="])
# builder.addVariation("FakeBMeasurement.numberOfInvertedBJetsCutValue", [0, 1])
# builder.addVariation("FakeBMeasurement.numberOfInvertedBJetsCutDirection", [">="])
# builder.addVariation("FakeBMeasurement.invertedBJetDiscr", "")
# builder.addVariation("FakeBMeasurement.invertedBJetDiscrWorkingPoint", "Loose")
# builder.addVariation("FakeBMeasurement.invertedBJetsSortType", ["Random", "DescendingBDiscriminator"])
# builder.addVariation("FakeBMeasurement.invertedBJetsDiscrMaxCutValue", [0.82, 0.80, 0.75, 0.70])
# builder.addVariation("TopSelection.ChiSqrCutValue", [100])
# builder.addVariation("Trigger.triggerOR", [["HLT_PFHT450_SixJet40"], ["HLT_PFHT400_SixJet30"]])
# builder.addVariation("TopologySelection.FoxWolframMomentCutValue", [0.5, 0.7])
# builder.addVariation("Trigger.triggerOR", [["HLT_PFHT400_SixJet30_DoubleBTagCSV_p056"], ["HLT_PFHT450_SixJet40_BTagCSV_p056"]])
# builder.addVariation("Trigger.triggerOR", [["HLT_PFHT400_SixJet30_DoubleBTagCSV_p056", "HLT_PFHT450_SixJet40_BTagCSV_p056"]])
# Build the builder
builder.build(process, allSelections)
# ================================================================================================
# Example of adding an analyzer whose configuration depends on dataVersion
# ================================================================================================
# def createAnalyzer(dataVersion):
# a = Analyzer("ExampleAnalysis")
# if dataVersion.isMC():
# a.tauPtCut = 10
# else:
# a.tauPtCut = 20
# return a
# process.addAnalyzer("test2", createAnalyzer)
# ================================================================================================
# Pick events
# ================================================================================================
# process.addOptions(EventSaver = PSet(enabled = True,pickEvents = True))
# ================================================================================================
# Run the analysis
# ================================================================================================
# Run the analysis with PROOF? You can give proofWorkers=<N> as a parameter
if opts.jCores:
Print("Running process with PROOF (proofWorkes=%s)" %
(str(opts.jCores)))
process.run(proof=True, proofWorkers=opts.jCores)
else:
Print("Running process (no PROOF)")
process.run()
# Print total time elapsed
tFinish = time.time()
dt = int(tFinish) - int(tStart)
days = divmod(dt, 86400) # days
hours = divmod(days[1], 3600) # hours
mins = divmod(hours[1], 60) # minutes
secs = mins[1] # seconds
Print(
"Total elapsed time is %s days, %s hours, %s mins, %s secs" %
(days[0], hours[0], mins[0], secs), True)
return
def main():
# Save start time (epoch seconds)
tStart = time.time()
Verbose("Started @ " + str(tStart), True)
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print(
"Not enough arguments passed to script execution. Printing docstring & EXIT."
)
print __doc__
sys.exit(0)
else:
pass
# ================================================================================================
# Setup the process
# ================================================================================================
maxEvents = {}
maxEvents["All"] = opts.nEvts
# maxEvents["2016"] = 1
# maxEvents["ZZTo4Q"] = -1
# maxEvents["ZJetsToQQ_HT600toInf"] = 1
# maxEvents["WZ_ext1"] = 1
# maxEvents["WZ"] = 1
# maxEvents["WWTo4Q"] = 1
# maxEvents["WJetsToQQ_HT_600ToInf"] = 1
# maxEvents["TTZToQQ"] = 1
# maxEvents["TTWJetsToQQ"] = 1
# maxEvents["TTTT"] = 1
# maxEvents["TT"] = 1
# maxEvents["ST_t_channel_top_4f_inclusiveDecays"] = 1
# maxEvents["ST_t_channel_antitop_4f_inclusiveDecays"] = 1
# maxEvents["ST_tW_top_5f_inclusiveDecays_ext1"] = 1
# maxEvents["ST_tW_top_5f_inclusiveDecays"] = 1
# maxEvents["ST_tW_antitop_5f_inclusiveDecays_ext1"] = 1
# maxEvents["ST_tW_antitop_5f_inclusiveDecays"] = 1
# maxEvents["ST_s_channel_4f_InclusiveDecays"] = 1
# maxEvents["QCD_HT700to1000_ext1"] = 1
# maxEvents["QCD_HT700to1000"] = 1
# maxEvents["QCD_HT50to100"] = 1
# maxEvents["QCD_HT500to700_ext1"] = 1
# maxEvents["QCD_HT500to700"] = 1
# maxEvents["QCD_HT300to500_ext1"] = 1
# maxEvents["QCD_HT300to500"] = 1
# maxEvents["QCD_HT200to300_ext1"] = 1
# maxEvents["QCD_HT200to300"] = 1
# maxEvents["QCD_HT2000toInf_ext1"] = 1
# maxEvents["QCD_HT2000toInf"] = 1
# maxEvents["QCD_HT1500to2000_ext1"] = 1
# maxEvents["QCD_HT1500to2000"] = 1
# maxEvents["QCD_HT100to200"] = 1
# maxEvents["QCD_HT1000to1500_ext1"] = 1
# maxEvents["QCD_HT1000to1500"] = 1
# maxEvents["JetHT_Run2016H_03Feb2017_ver3_v1_284036_284044"] = 1
# maxEvents["JetHT_Run2016H_03Feb2017_ver2_v1_281613_284035"] = 1
# maxEvents["JetHT_Run2016G_03Feb2017_v1_278820_280385"] = 1
# maxEvents["JetHT_Run2016F_03Feb2017_v1_278801_278808"] = 1
# maxEvents["JetHT_Run2016F_03Feb2017_v1_277932_278800"] = 1
# maxEvents["JetHT_Run2016E_03Feb2017_v1_276831_277420"] = 1
# maxEvents["JetHT_Run2016D_03Feb2017_v1_276315_276811"] = 1
# maxEvents["JetHT_Run2016C_03Feb2017_v1_275656_276283"] = 1
# maxEvents["JetHT_Run2016B_03Feb2017_ver2_v2_273150_275376"] = 1
# maxEvents["DYJetsToQQ_HT180"] = 1
# maxEvents["ChargedHiggs_HplusTB_HplusToTB_M_500"] = 1
process = Process(prefix, postfix, maxEvents)
# ================================================================================================
# Add the datasets (according to user options)
# ================================================================================================
if (opts.includeOnlyTasks):
Verbose("Adding only dataset %s from multiCRAB directory %s" %
(opts.includeOnlyTasks, opts.mcrab))
process.addDatasetsFromMulticrab(
opts.mcrab, includeOnlyTasks=opts.includeOnlyTasks)
elif (opts.excludeTasks):
Verbose("Adding all datasets except %s from multiCRAB directory %s" %
(opts.excludeTasks, opts.mcrab))
Print(
"If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc..."
)
process.addDatasetsFromMulticrab(opts.mcrab,
excludeTasks=opts.excludeTasks)
else:
myBlackList = [
"M_180", "M_200", "M_220", "M_250", "M_300", "M_350", "M_400",
"M_500", "M_650", "M_800", "M_1000", "M_1500", "M_2000", "M_2500",
"M_3000", "M_5000", "M_7000", "M_10000", "QCD"
]
Verbose("Adding all datasets from multiCRAB directory %s except %s" %
(opts.mcrab, (",".join(myBlackList))))
Verbose(
"Vertex reweighting is done according to the chosen data era (%s)"
% (",".join(dataEras)))
# process.addDatasetsFromMulticrab(opts.mcrab, blacklist=myBlackList)
if len(myBlackList) > 0:
regex = "|".join(myBlackList)
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=regex)
else:
process.addDatasetsFromMulticrab(opts.mcrab)
# ================================================================================================
# Overwrite Default Settings
# ================================================================================================
from HiggsAnalysis.NtupleAnalysis.parameters.hplus2tbAnalysis import allSelections
allSelections.verbose = opts.verbose
allSelections.histogramAmbientLevel = opts.histoLevel
# Set splitting of phase-space (first bin is below first edge value and last bin is above last edge value)
allSelections.CommonPlots.histogramSplitting = [
# PSet(label="TetrajetBjetPt" , binLowEdges=[60, 100], useAbsoluteValues=False),
# PSet(label="TetrajetBjetEta", binLowEdges=[0.8, 1.6, 2.1], useAbsoluteValues=True), # B) not bad for -1.0 < BDT < 0.4
## PSet(label="TetrajetBjetPt" , binLowEdges=[120], useAbsoluteValues=False),
## PSet(label="TetrajetBjetEta", binLowEdges=[0.6, 1.2, 1.8, 2.1], useAbsoluteValues=True),
## PSet(label="TetrajetBjetPt" , binLowEdges=[100], useAbsoluteValues=False),
## PSet(label="TetrajetBjetEta", binLowEdges=[0.6, 0.9, 1.2, 1.5, 1.8, 2.1], useAbsoluteValues=True),
## PSet(label="TetrajetBjetPt" , binLowEdges=[80], useAbsoluteValues=False),
## PSet(label="TetrajetBjetEta", binLowEdges=[0.4, 0.8, 1.6, 2.0], useAbsoluteValues=True),
### Default binning
#PSet(label="TetrajetBjetPt" , binLowEdges=[60, 80, 160], useAbsoluteValues=False), # Alexandros (40-60, and 60-80 bins off. others v. good)
#PSet(label="TetrajetBjetEta", binLowEdges=[1.0, 1.8], useAbsoluteValues=True), # Alexandros good!
#PSet(label="TetrajetBjetPt" , binLowEdges=[80, 160], useAbsoluteValues=False), # Alexandros (40-60, and 60-80 bins off. others good)
#PSet(label="TetrajetBjetEta", binLowEdges=[1.0, 1.8], useAbsoluteValues=True), # Alexandros good!
#
# PSet(label="TetrajetBjetPt" , binLowEdges=[80, 200], useAbsoluteValues=False), # Fotis
# PSet(label="TetrajetBjetEta", binLowEdges=[0.8, 1.6], useAbsoluteValues=True), # Fotis
#
# PSet(label="TetrajetBjetPt" , binLowEdges=[60, 80, 140, 200], useAbsoluteValues=False), #Fotis
# PSet(label="TetrajetBjetEta", binLowEdges=[0.8, 1.5, 2.1], useAbsoluteValues=True), #Fotis
# PSet(label="TetrajetBjetPt" , binLowEdges=[50, 60, 80, 100, 160], useAbsoluteValues=False),
# PSet(label="TetrajetBjetEta", binLowEdges=[0.2, 0.4, 0.6, 0.8, 1.6, 2.0, 2.2], useAbsoluteValues=True),
PSet(label="TetrajetBjetEta",
binLowEdges=[0.4, 0.8, 1.6, 2.0, 2.2],
useAbsoluteValues=True), #AN v4
### Other attempts
# PSet(label="TetrajetBjetEta", binLowEdges=[-2.2, -2.0, -1.6, -0.8, -0.4, +0.4, +0.8, +1.6, +2.0, +2.2], useAbsoluteValues=False),
# PSet(label="TetrajetBjetPt" , binLowEdges=[100], useAbsoluteValues=False), # C)
# PSet(label="TetrajetBjetEta", binLowEdges=[0.4, 1.2, 1.8, 2.1], useAbsoluteValues=True), # C)
# PSet(label="TetrajetBjetPt" , binLowEdges=[60, 100], useAbsoluteValues=False), # B) not bad for -1.0 < BDT < 0.4
# PSet(label="TetrajetBjetEta", binLowEdges=[0.4, 1.2, 1.8, 2.0], useAbsoluteValues=True), # B) not bad for -1.0 < BDT < 0.4
# PSet(label="TetrajetBjetPt" , binLowEdges=[120, 200], useAbsoluteValues=False), # A) not great for -1.0 < BDT < 0.4
# PSet(label="TetrajetBjetEta", binLowEdges=[0.4, 1.2, 1.8, 2.1], useAbsoluteValues=True), # A) not great for -1.0 < BDT < 0.4
# PSet(label="TetrajetBjetEta", binLowEdges=[0.4, 0.8, 1.6, 1.8, 2.0, 2.2], useAbsoluteValues=True), #so-so
# PSet(label="TetrajetBjetEta", binLowEdges=[0.4, 1.2, 1.8], useAbsoluteValues=True), #|eta| < 0.4, 0.4 < |eta| < 1.2, 1.2 < |eta| < 1.8, |eta| > 1.8,
# PSet(label="TetrajetBjetEta", binLowEdges=[0.2, 0.4, 0.8, 1.2, 1.6, 2.0, 2.2], useAbsoluteValues=True),
# PSet(label="TetrajetBjetEta", binLowEdges=[-1.8, -1.2, -0.4, 0.0, 0.4, 1.2, 1.8], useAbsoluteValues=False),
# PSet(label="TetrajetBjetPt" , binLowEdges=[40, 60, 100, 200, 300], useAbsoluteValues=False), # pT < 40, pT=40-60, pT=60-100, pT=100-200, pT > 200
]
# allSelections.BJetSelection.triggerMatchingApply = True # at least 1 trg b-jet matched to offline b-jets
# allSelections.Trigger.triggerOR = ["HLT_PFHT400_SixJet30_DoubleBTagCSV_p056"]
# allSelections.Trigger.triggerOR = ["HLT_PFHT450_SixJet40_BTagCSV_p056"]
# ================================================================================================
# Command Line Options
# ================================================================================================
# from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import applyAnalysisCommandLineOptions
# applyAnalysisCommandLineOptions(sys.argv, allSelections)
# ================================================================================================
# Build analysis modules
# ================================================================================================
PrintOptions(opts)
builder = AnalysisBuilder(prefix,
dataEras,
searchModes,
usePUreweighting=opts.usePUreweighting,
useTopPtReweighting=opts.useTopPtReweighting,
doSystematicVariations=opts.doSystematics,
analysisType="HToTB",
verbose=opts.verbose)
# Add variations (e.g. for optimisation)
# builder.addVariation("BJetSelection.triggerMatchingApply", [True, False]) # At least 1 trg b-jet dR-matched to offline b-jets
# builder.addVariation("FakeBMeasurement.prelimTopFitChiSqrCutValue", [100, 20])
# builder.addVariation("FakeBMeasurement.prelimTopFitChiSqrCutDirection", ["<=", "==", ">="])
# builder.addVariation("FakeBMeasurement.numberOfBJetsCutValue", [0, 1])
# builder.addVariation("FakeBMeasurement.numberOfBJetsCutDirection", ["=="])
# builder.addVariation("FakeBMeasurement.numberOfBJetsCutDirection", ["<=", "==", ">="])
# builder.addVariation("FakeBMeasurement.numberOfInvertedBJetsCutValue", [0, 1])
# builder.addVariation("FakeBMeasurement.numberOfInvertedBJetsCutDirection", [">="])
# builder.addVariation("FakeBMeasurement.invertedBJetDiscr", "")
# builder.addVariation("FakeBMeasurement.invertedBJetDiscrWorkingPoint", "Loose")
# builder.addVariation("FakeBMeasurement.invertedBJetsSortType", ["Random", "DescendingBDiscriminator"])
# builder.addVariation("FakeBMeasurement.invertedBJetsDiscrMaxCutValue", [0.82, 0.80, 0.75, 0.70])
# builder.addVariation("TopSelection.ChiSqrCutValue", [100])
# builder.addVariation("Trigger.triggerOR", [["HLT_PFHT450_SixJet40"], ["HLT_PFHT400_SixJet30"]])
# builder.addVariation("TopologySelection.FoxWolframMomentCutValue", [0.5, 0.7])
# builder.addVariation("Trigger.triggerOR", [["HLT_PFHT400_SixJet30_DoubleBTagCSV_p056"], ["HLT_PFHT450_SixJet40_BTagCSV_p056"]])
# builder.addVariation("Trigger.triggerOR", [["HLT_PFHT400_SixJet30_DoubleBTagCSV_p056", "HLT_PFHT450_SixJet40_BTagCSV_p056"]])
# Build the builder
builder.build(process, allSelections)
# ================================================================================================
# Example of adding an analyzer whose configuration depends on dataVersion
# ================================================================================================
# def createAnalyzer(dataVersion):
# a = Analyzer("ExampleAnalysis")
# if dataVersion.isMC():
# a.tauPtCut = 10
# else:
# a.tauPtCut = 20
# return a
# process.addAnalyzer("test2", createAnalyzer)
# ================================================================================================
# Pick events
# ================================================================================================
# process.addOptions(EventSaver = PSet(enabled = True,pickEvents = True))
# ================================================================================================
# Run the analysis
# ================================================================================================
# Run the analysis with PROOF? You can give proofWorkers=<N> as a parameter
if opts.jCores:
Print("Running process with PROOF (proofWorkes=%s)" %
(str(opts.jCores)))
process.run(proof=True, proofWorkers=opts.jCores)
else:
Print("Running process (no PROOF)")
process.run()
# Print total time elapsed
tFinish = time.time()
dt = int(tFinish) - int(tStart)
days = divmod(dt, 86400) # days
hours = divmod(days[1], 3600) # hours
mins = divmod(hours[1], 60) # minutes
secs = mins[1] # seconds
Print(
"Total elapsed time is %s days, %s hours, %s mins, %s secs" %
(days[0], hours[0], mins[0], secs), True)
return
def main():
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print("Not enough arguments passed to script execution. Printing docstring & EXIT.")
print __doc__
sys.exit(0)
else:
pass
# ================================================================================================
# Setup the process
# ================================================================================================
maxEvents = {}
maxEvents["All"] = opts.nEvts
process = Process(prefix, postfix, maxEvents)
# ================================================================================================
# Add the datasets (according to user options)
# ================================================================================================
if (opts.includeOnlyTasks):
Print("Adding only dataset \"%s\" from multiCRAB directory %s" % (opts.includeOnlyTasks, opts.mcrab))
process.addDatasetsFromMulticrab(opts.mcrab, includeOnlyTasks=opts.includeOnlyTasks)
elif (opts.excludeTasks):
Print("Adding all datasets except \"%s\" from multiCRAB directory %s" % (opts.excludeTasks, opts.mcrab))
Print("If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc...")
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=opts.excludeTasks)
else:
myBlackList = []
if opts.analysisType == "HToTB":
myBlackList = ["QCD_b", "ChargedHiggs", "DY", "WZ", "WW", "ZZ", "TTTT", "ST", "TTWJets", "TTZ"]
Print("Adding all datasets from multiCRAB directory %s" % (opts.mcrab))
Print("If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc...")
regex = "|".join(myBlackList)
if len(myBlackList)>0:
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=regex)
else:
process.addDatasetsFromMulticrab(opts.mcrab)
# ================================================================================================
# Selection customisations
# ================================================================================================
if opts.analysisType == "HToTauNu":
from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import allSelections
# Disable rtau
allSelections.TauSelection.prongs = 1
allSelections.TauSelection.rtau = 0.0
elif opts.analysisType == "HToTB":
from HiggsAnalysis.NtupleAnalysis.parameters.hplus2tbAnalysis import allSelections
else:
raise Exception("Invalid analysis selection \"%s\"! Valid options are: %s" % (opts.analysisType, ", ".join(allowedAnalysis)))
# Jet cut values
allSelections.__setattr__("jetPtCutMin", 0.0)
allSelections.__setattr__("jetPtCutMax", 99990.0)
allSelections.__setattr__("jetEtaCutMin", -2.5)
allSelections.__setattr__("jetEtaCutMax", 2.5)
if 0:
for algo in ["combinedInclusiveSecondaryVertexV2BJetTags"]:
for wp in ["Loose", "Medium", "Tight"]:
selections = allSelections.clone()
selections.BJetSelection.bjetDiscr = algo
selections.BJetSelection.bjetDiscrWorkingPoint = wp
suffix = "_%s_%s"%(algo,wp)
print "Added analyzer for algo/wp: %s"%suffix
process.addAnalyzer("BTagEfficiency"+suffix, Analyzer("BTagEfficiencyAnalysis", config=selections, silent=False))
# Set the analysis type
allSelections.__setattr__("AnalysisType", opts.analysisType)
# Overwrite verbosity
allSelections.verbose = opts.verbose
# Overwrite histo ambient level (Options: Systematics, Vital, Informative, Debug)
allSelections.histogramAmbientLevel = opts.histoLevel
#================================================================================================
# Build analysis modules
#================================================================================================
PrintOptions(opts)
builder = AnalysisBuilder(prefix,
dataEras,
searchModes,
#### Options ####
usePUreweighting = opts.usePUreweighting,
useTopPtReweighting = opts.useTopPtReweighting,
doSystematicVariations = opts.doSystematics)
# ================================================================================================
# Add Analysis Variations
# ================================================================================================
builder.addVariation("BJetSelection.bjetDiscr", ["pfCombinedInclusiveSecondaryVertexV2BJetTags"])
builder.addVariation("BJetSelection.bjetDiscrWorkingPoint", ["Loose", "Medium", "Tight"])
# ================================================================================================
# Build the builder
# ================================================================================================
builder.build(process, allSelections)
# ================================================================================================
# Run the analysis
# ================================================================================================
Print("Running process", True)
process.run()
def main():
# Save start time (epoch seconds)
tStart = time.time()
Verbose("Started @ " + str(tStart), True)
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print(
"Not enough arguments passed to script execution. Printing docstring & EXIT."
)
print __doc__
sys.exit(0)
else:
pass
# ================================================================================================
# Setup the process
# ================================================================================================
completeList = GetDatasetCompleteList()
whiteList = GetDatasetWhitelist(opts)
blackList = GetDatasetBlackList(completeList, whiteList)
maxEvents = {}
for d in whiteList:
maxEvents[d] = -1
#maxEvents[d] = 100 #for testing
#if d == "ChargedHiggs_HplusTB_HplusToTB_M_650":
# maxEvents[d] = 4000000
process = Process(prefix, postfix, maxEvents)
# ================================================================================================
# Add the datasets (according to user options)
# ================================================================================================
if (opts.includeOnlyTasks):
Verbose("Adding only dataset %s from multiCRAB directory %s" %
(opts.includeOnlyTasks, opts.mcrab))
process.addDatasetsFromMulticrab(
opts.mcrab, includeOnlyTasks=opts.includeOnlyTasks)
elif (opts.excludeTasks):
Verbose("Adding all datasets except %s from multiCRAB directory %s" %
(opts.excludeTasks, opts.mcrab))
Verbose(
"If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc..."
)
process.addDatasetsFromMulticrab(opts.mcrab,
excludeTasks=opts.excludeTasks)
else:
myBlackList = [
"QCD_b"
"ChargedHiggs_HplusTB_HplusToTB_M_180",
"ChargedHiggs_HplusTB_HplusToTB_M_200",
"ChargedHiggs_HplusTB_HplusToTB_M_220",
"ChargedHiggs_HplusTB_HplusToTB_M_250",
"ChargedHiggs_HplusTB_HplusToTB_M_300",
"ChargedHiggs_HplusTB_HplusToTB_M_350",
"ChargedHiggs_HplusTB_HplusToTB_M_400",
"ChargedHiggs_HplusTB_HplusToTB_M_500",
"ChargedHiggs_HplusTB_HplusToTB_M_650",
"ChargedHiggs_HplusTB_HplusToTB_M_800",
"ChargedHiggs_HplusTB_HplusToTB_M_1000",
"ChargedHiggs_HplusTB_HplusToTB_M_1500",
"ChargedHiggs_HplusTB_HplusToTB_M_2000",
"ChargedHiggs_HplusTB_HplusToTB_M_2500",
"ChargedHiggs_HplusTB_HplusToTB_M_3000",
"ChargedHiggs_HplusTB_HplusToTB_M_5000",
"ChargedHiggs_HplusTB_HplusToTB_M_7000",
"ChargedHiggs_HplusTB_HplusToTB_M_10000",
# "ChargedHiggs_HplusTB_HplusToTB_M_180_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_200_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_220_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_250_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_300_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_350_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_400_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_500_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_800_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_1000_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_1500_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_2000_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_2500_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_3000_ext1",
]
if opts.doSystematics:
whiteList = GetDatasetWhitelist(opts)
# Extend the blacklist with datasets not in the group
myBlackList.extend(blackList)
Verbose(
"Adding the following datasets from multiCRAB directory %s:\n\t%s"
% (opts.mcrab, "\n\t".join(whiteList)))
Verbose(
"If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc..."
)
if len(whiteList) > 0:
process.addDatasetsFromMulticrab(
opts.mcrab, includeOnlyTasks="|".join(whiteList))
elif len(myBlackList) > 0:
#if len(myBlackList)>0:
process.addDatasetsFromMulticrab(
opts.mcrab, excludeTasks="|".join(myBlackList))
else:
process.addDatasetsFromMulticrab(opts.mcrab)
# ***************************************
# Keep ONLY datasets in whitelist
# ***************************************
Verbose("Removing datasets NOT included in whitelist:")
removeList = []
for i, d in enumerate(process.getDatasets()):
if d.getName() not in whiteList:
Verbose("Dataset to be removed: %s" % (d.getName()))
removeList.append(d)
for d in removeList:
process._datasets.remove(d)
# ================================================================================================
# Overwrite Default Settings
# ================================================================================================
from HiggsAnalysis.NtupleAnalysis.parameters.hplus2tbAnalysis import allSelections
allSelections.verbose = opts.verbose
allSelections.histogramAmbientLevel = opts.histoLevel
# allSelections.BjetSelection.triggerMatchingApply = True
# allSelections.TopSelection.ChiSqrCutValue = 100.0
# allSelections.BJetSelection.numberOfBJetsCutValue = 0
# allSelections.BJetSelection.numberOfBJetsCutDirection = "=="
# ================================================================================================
# Add Analysis Variations
# ================================================================================================
# selections = allSelections.clone()
# process.addAnalyzer(prefix, Analyzer(prefix, config=selections, silent=False) ) #trigger passed from selections
# ================================================================================================
# Command Line Options
# ================================================================================================
# from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import applyAnalysisCommandLineOptions
# applyAnalysisCommandLineOptions(sys.argv, allSelections)
#================================================================================================
# Build analysis modules
#================================================================================================
PrintOptions(opts)
builder = AnalysisBuilder(prefix,
dataEras,
searchModes,
usePUreweighting=opts.usePUreweighting,
useTopPtReweighting=opts.useTopPtReweighting,
doSystematicVariations=opts.doSystematics,
analysisType="HToTB",
verbose=opts.verbose,
systVarsList=opts.systVarsList)
# Add variations (e.g. for optimisation)
# builder.addVariation("METSelection.METCutValue", [100,120,140])
# builder.addVariation("AngularCutsBackToBack.workingPoint", ["Loose","Medium","Tight"])
# builder.addVariation("BJetSelection.triggerMatchingApply", [False])
# builder.addVariation("TopSelection.ChiSqrCutValue", [5, 10, 15, 20])
# Build the builder
builder.build(process, allSelections)
# ================================================================================================
# Example of adding an analyzer whose configuration depends on dataVersion
# ================================================================================================
#def createAnalyzer(dataVersion):
#a = Analyzer("ExampleAnalysis")
#if dataVersion.isMC():
#a.tauPtCut = 10
#else:
#a.tauPtCut = 20
#return a
#process.addAnalyzer("test2", createAnalyzer)
# ================================================================================================
# Pick events
# ================================================================================================
#process.addOptions(EventSaver = PSet(enabled = True,pickEvents = True))
# ================================================================================================
# Run the analysis
# ================================================================================================
# Run the analysis with PROOF? You can give proofWorkers=<N> as a parameter
if opts.jCores:
Print("Running process with PROOF (proofWorkes=%s)" %
(str(opts.jCores)))
process.run(proof=True, proofWorkers=opts.jCores)
else:
Verbose("Running process")
process.run()
# Print total time elapsed
tFinish = time.time()
dt = int(tFinish) - int(tStart)
days = divmod(dt, 86400) # days
hours = divmod(days[1], 3600) # hours
mins = divmod(hours[1], 60) # minutes
secs = mins[1] # seconds
Print(
"Total elapsed time is %s days, %s hours, %s mins, %s secs" %
(days[0], hours[0], mins[0], secs), True)
return
def main():
# Save start time (epoch seconds)
tStart = time.time()
Verbose("Started @ " + str(tStart), True)
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print("Not enough arguments passed to script execution. Printing docstring & EXIT.")
print __doc__
sys.exit(0)
else:
pass
# ================================================================================================
# Setup the process
# ================================================================================================
completeList = GetDatasetCompleteList()
whiteList = GetDatasetWhitelist(opts)
blackList = GetDatasetBlackList(completeList, whiteList)
maxEvents = {}
for d in whiteList:
#maxEvents[d] = 100
maxEvents[d] = -1
process = Process(prefix, postfix, maxEvents)
# ================================================================================================
# Add the datasets (according to user options)
# ================================================================================================
if (opts.includeOnlyTasks):
Print("Adding only dataset %s from multiCRAB directory %s" % (opts.includeOnlyTasks, opts.mcrab))
process.addDatasetsFromMulticrab(opts.mcrab, includeOnlyTasks=opts.includeOnlyTasks)
elif (opts.excludeTasks):
Print("Adding all datasets except %s from multiCRAB directory %s" % (opts.excludeTasks, opts.mcrab))
Print("If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc...")
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=opts.excludeTasks)
else:
myBlackList = []
myBlackList.extend(blackList)
Verbose("Adding all datasets from multiCRAB directory %s" % (opts.mcrab))
Verbose("If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc...")
regex = "|".join(myBlackList)
if len(whiteList)>0:
process.addDatasetsFromMulticrab(opts.mcrab, includeOnlyTasks="|".join(whiteList))
elif len(myBlackList)>0:
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=regex)
else:
process.addDatasetsFromMulticrab(opts.mcrab)
# ================================================================================================
# Overwrite Default Settings
# ================================================================================================
from HiggsAnalysis.NtupleAnalysis.parameters.jetTriggers import allSelections
allSelections.verbose = opts.verbose
allSelections.histogramAmbientLevel = opts.histoLevel
#==========================
# Systematics selections
#==========================
# MET
allSelections.METSelection.METCutValue = 50.0
# Muon
allSelections.MuonSelection.muonPtCut = 30
# Jets
allSelections.JetSelection.numberOfJetsCutValue = 4
allSelections.JetSelection.jetPtCuts = [40.0, 40.0, 40.0, 30.0]
# Triggers
allSelections.Trigger.triggerOR = ["HLT_Mu50"]
# Bjets
allSelections.BJetSelection.jetPtCuts = [40.0, 30.0]
allSelections.BJetSelection.numberOfBJetsCutValue = 2
# allSelections.BjetSelection.triggerMatchingApply = True
# allSelections.TopSelection.ChiSqrCutValue = 100.0
# allSelections.BJetSelection.numberOfBJetsCutValue = 0
# allSelections.BJetSelection.numberOfBJetsCutDirection = "=="
# ================================================================================================
# Add Analysis Variations
# ================================================================================================
# selections = allSelections.clone()
# process.addAnalyzer(prefix, Analyzer(prefix, config=selections, silent=False) ) #trigger passed from selections
# ================================================================================================
# Command Line Options
# ================================================================================================
# from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import applyAnalysisCommandLineOptions
# applyAnalysisCommandLineOptions(sys.argv, allSelections)
#================================================================================================
# Build analysis modules
#================================================================================================
PrintOptions(opts)
builder = AnalysisBuilder(prefix,
dataEras,
searchModes,
usePUreweighting = opts.usePUreweighting,
useTopPtReweighting = opts.useTopPtReweighting,
doSystematicVariations = opts.doSystematics,
analysisType="HToTB")
# Add variations (e.g. for optimisation)
# builder.addVariation("METSelection.METCutValue", [100,120,140])
# builder.addVariation("AngularCutsBackToBack.workingPoint", ["Loose","Medium","Tight"])
# builder.addVariation("BJetSelection.triggerMatchingApply", [False])
# builder.addVariation("TopSelection.ChiSqrCutValue", [5, 10, 15, 20])
# Build the builder
builder.build(process, allSelections)
# ================================================================================================
# Example of adding an analyzer whose configuration depends on dataVersion
# ================================================================================================
#def createAnalyzer(dataVersion):
#a = Analyzer("ExampleAnalysis")
#if dataVersion.isMC():
#a.tauPtCut = 10
#else:
#a.tauPtCut = 20
#return a
#process.addAnalyzer("test2", createAnalyzer)
# ================================================================================================
# Pick events
# ================================================================================================
#process.addOptions(EventSaver = PSet(enabled = True,pickEvents = True))
# ================================================================================================
# Run the analysis
# ================================================================================================
# Run the analysis with PROOF? You can give proofWorkers=<N> as a parameter
if opts.jCores:
Print("Running process with PROOF (proofWorkes=%s)" % ( str(opts.jCores) ) )
process.run(proof=True, proofWorkers=opts.jCores)
else:
Print("Running process")
process.run()
# Print total time elapsed
tFinish = time.time()
dt = int(tFinish) - int(tStart)
days = divmod(dt,86400) # days
hours = divmod(days[1],3600) # hours
mins = divmod(hours[1],60) # minutes
secs = mins[1] # seconds
Print("Total elapsed time is %s days, %s hours, %s mins, %s secs" % (days[0], hours[0], mins[0], secs), True)
return
def main():
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print(
"Not enough arguments passed to script execution. Printing docstring & EXIT."
)
print __doc__
sys.exit(0)
else:
pass
# ================================================================================================
# Setup the process
# ================================================================================================
process = Process(prefix, postfix, opts.nEvts)
# ================================================================================================
# Add the datasets (according to user options)
# ================================================================================================
if (opts.includeOnlyTasks):
Print("Adding only dataset %s from multiCRAB directory %s" %
(opts.includeOnlyTasks, opts.mcrab))
process.addDatasetsFromMulticrab(
opts.mcrab, includeOnlyTasks=opts.includeOnlyTasks)
elif (opts.excludeTasks):
Print("Adding all datasets except %s from multiCRAB directory %s" %
(opts.excludeTasks, opts.mcrab))
Print(
"If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc..."
)
process.addDatasetsFromMulticrab(opts.mcrab,
excludeTasks=opts.excludeTasks)
else:
Print("Adding all datasets from multiCRAB directory %s" % (opts.mcrab))
Print(
"If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc..."
)
process.addDatasetsFromMulticrab(opts.mcrab)
# ================================================================================================
# Selection customisations
# ================================================================================================
if opts.analysisType == "HToTauNu":
from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import allSelections
# Disable rtau
allSelections.TauSelection.prongs = 1
allSelections.TauSelection.rtau = 0.0
elif opts.analysisType == "HToTB":
from HiggsAnalysis.NtupleAnalysis.parameters.hplus2tbAnalysis import allSelections
else:
raise Exception(
"Invalid analysis selection \"%s\"! Valid options are: %s" %
(opts.analysisType, ", ".join(allowedAnalysis)))
# Jet cut values
allSelections.__setattr__("jetPtCutMin", 0.0)
allSelections.__setattr__("jetPtCutMax", 99990.0)
allSelections.__setattr__("jetEtaCutMin", -2.5)
allSelections.__setattr__("jetEtaCutMax", 2.5)
# for algo in ["combinedInclusiveSecondaryVertexV2BJetTags"]:
# for wp in ["Loose", "Medium", "Tight"]:
# selections = allSelections.clone()
# selections.BJetSelection.bjetDiscr = algo
# selections.BJetSelection.bjetDiscrWorkingPoint = wp
# suffix = "_%s_%s"%(algo,wp)
# print "Added analyzer for algo/wp: %s"%suffix
# process.addAnalyzer("BTagEfficiency"+suffix, Analyzer("BTagEfficiencyAnalysis", config=selections, silent=False))
# Set the analysis type
allSelections.__setattr__("AnalysisType", opts.analysisType)
# Overwrite verbosity
allSelections.verbose = opts.verbose
# Overwrite histo ambient level (Options: Systematics, Vital, Informative, Debug)
allSelections.histogramAmbientLevel = opts.histoLevel
#================================================================================================
# Build analysis modules
#================================================================================================
PrintOptions(opts)
builder = AnalysisBuilder(
prefix,
dataEras,
searchModes,
#### Options ####
usePUreweighting=opts.usePUreweighting,
useTopPtReweighting=opts.useTopPtReweighting,
doSystematicVariations=opts.doSystematics)
# ================================================================================================
# Add Analysis Variations
# ================================================================================================
builder.addVariation("BJetSelection.bjetDiscr",
["pfCombinedInclusiveSecondaryVertexV2BJetTags"])
builder.addVariation("BJetSelection.bjetDiscrWorkingPoint",
["Loose", "Medium", "Tight"])
# ================================================================================================
# Build the builder
# ================================================================================================
builder.build(process, allSelections)
# ================================================================================================
# Run the analysis
# ================================================================================================
Print("Running process", True)
process.run()
def main():
# Save start time (epoch seconds)
tStart = time.time()
Verbose("Started @ " + str(tStart), True)
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print("Not enough arguments passed to script execution. Printing docstring & EXIT.")
print __doc__
sys.exit(0)
else:
pass
# ================================================================================================
# Setup the process
# ================================================================================================
completeList = GetDatasetCompleteList()
whiteList = GetDatasetWhitelist(opts)
blackList = GetDatasetBlackList(completeList, whiteList)
maxEvents = {}
for d in whiteList:
maxEvents[d] = -1
#maxEvents[d] = 100 #for testing
#if d == "ChargedHiggs_HplusTB_HplusToTB_M_650":
# maxEvents[d] = 4000000
process = Process(prefix, postfix, maxEvents)
# ================================================================================================
# Add the datasets (according to user options)
# ================================================================================================
if (opts.includeOnlyTasks):
Verbose("Adding only dataset %s from multiCRAB directory %s" % (opts.includeOnlyTasks, opts.mcrab))
process.addDatasetsFromMulticrab(opts.mcrab, includeOnlyTasks=opts.includeOnlyTasks)
elif (opts.excludeTasks):
Verbose("Adding all datasets except %s from multiCRAB directory %s" % (opts.excludeTasks, opts.mcrab))
Verbose("If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc...")
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=opts.excludeTasks)
else:
myBlackList = [
"QCD_b"
"ChargedHiggs_HplusTB_HplusToTB_M_180",
"ChargedHiggs_HplusTB_HplusToTB_M_200",
"ChargedHiggs_HplusTB_HplusToTB_M_220",
"ChargedHiggs_HplusTB_HplusToTB_M_250",
"ChargedHiggs_HplusTB_HplusToTB_M_300",
"ChargedHiggs_HplusTB_HplusToTB_M_350",
"ChargedHiggs_HplusTB_HplusToTB_M_400",
"ChargedHiggs_HplusTB_HplusToTB_M_500",
"ChargedHiggs_HplusTB_HplusToTB_M_650",
"ChargedHiggs_HplusTB_HplusToTB_M_800",
"ChargedHiggs_HplusTB_HplusToTB_M_1000",
"ChargedHiggs_HplusTB_HplusToTB_M_1500",
"ChargedHiggs_HplusTB_HplusToTB_M_2000",
"ChargedHiggs_HplusTB_HplusToTB_M_2500",
"ChargedHiggs_HplusTB_HplusToTB_M_3000",
"ChargedHiggs_HplusTB_HplusToTB_M_5000",
"ChargedHiggs_HplusTB_HplusToTB_M_7000",
"ChargedHiggs_HplusTB_HplusToTB_M_10000",
# "ChargedHiggs_HplusTB_HplusToTB_M_180_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_200_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_220_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_250_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_300_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_350_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_400_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_500_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_800_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_1000_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_1500_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_2000_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_2500_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_3000_ext1",
]
if opts.doSystematics:
whiteList = GetDatasetWhitelist(opts)
# Extend the blacklist with datasets not in the group
myBlackList.extend(blackList)
Verbose("Adding the following datasets from multiCRAB directory %s:\n\t%s" % (opts.mcrab, "\n\t".join(whiteList) ))
Verbose("If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc...")
if len(whiteList)>0:
process.addDatasetsFromMulticrab(opts.mcrab, includeOnlyTasks="|".join(whiteList))
elif len(myBlackList)>0:
#if len(myBlackList)>0:
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks="|".join(myBlackList))
else:
process.addDatasetsFromMulticrab(opts.mcrab)
# ***************************************
# Keep ONLY datasets in whitelist
# ***************************************
Verbose("Removing datasets NOT included in whitelist:")
removeList = []
for i, d in enumerate(process.getDatasets()):
if d.getName() not in whiteList:
Verbose("Dataset to be removed: %s" % (d.getName()))
removeList.append(d)
for d in removeList:
process._datasets.remove(d)
# ================================================================================================
# Overwrite Default Settings
# ================================================================================================
from HiggsAnalysis.NtupleAnalysis.parameters.hplus2tbAnalysis import allSelections
allSelections.verbose = opts.verbose
allSelections.histogramAmbientLevel = opts.histoLevel
# allSelections.BjetSelection.triggerMatchingApply = True
# allSelections.TopSelection.ChiSqrCutValue = 100.0
# allSelections.BJetSelection.numberOfBJetsCutValue = 0
# allSelections.BJetSelection.numberOfBJetsCutDirection = "=="
# ================================================================================================
# Add Analysis Variations
# ================================================================================================
# selections = allSelections.clone()
# process.addAnalyzer(prefix, Analyzer(prefix, config=selections, silent=False) ) #trigger passed from selections
# ================================================================================================
# Command Line Options
# ================================================================================================
# from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import applyAnalysisCommandLineOptions
# applyAnalysisCommandLineOptions(sys.argv, allSelections)
#================================================================================================
# Build analysis modules
#================================================================================================
PrintOptions(opts)
builder = AnalysisBuilder(prefix,
dataEras,
searchModes,
usePUreweighting = opts.usePUreweighting,
useTopPtReweighting = opts.useTopPtReweighting,
doSystematicVariations = opts.doSystematics,
analysisType="HToTB",
verbose=opts.verbose,
systVarsList=opts.systVarsList)
# Add variations (e.g. for optimisation)
# builder.addVariation("METSelection.METCutValue", [100,120,140])
# builder.addVariation("AngularCutsBackToBack.workingPoint", ["Loose","Medium","Tight"])
# builder.addVariation("BJetSelection.triggerMatchingApply", [False])
# builder.addVariation("TopSelection.ChiSqrCutValue", [5, 10, 15, 20])
# Build the builder
builder.build(process, allSelections)
# ================================================================================================
# Example of adding an analyzer whose configuration depends on dataVersion
# ================================================================================================
#def createAnalyzer(dataVersion):
#a = Analyzer("ExampleAnalysis")
#if dataVersion.isMC():
#a.tauPtCut = 10
#else:
#a.tauPtCut = 20
#return a
#process.addAnalyzer("test2", createAnalyzer)
# ================================================================================================
# Pick events
# ================================================================================================
#process.addOptions(EventSaver = PSet(enabled = True,pickEvents = True))
# ================================================================================================
# Run the analysis
# ================================================================================================
# Run the analysis with PROOF? You can give proofWorkers=<N> as a parameter
if opts.jCores:
Print("Running process with PROOF (proofWorkes=%s)" % ( str(opts.jCores) ) )
process.run(proof=True, proofWorkers=opts.jCores)
else:
Verbose("Running process")
process.run()
# Print total time elapsed
tFinish = time.time()
dt = int(tFinish) - int(tStart)
days = divmod(dt,86400) # days
hours = divmod(days[1],3600) # hours
mins = divmod(hours[1],60) # minutes
secs = mins[1] # seconds
Print("Total elapsed time is %s days, %s hours, %s mins, %s secs" % (days[0], hours[0], mins[0], secs), True)
return
def main():
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print(
"Not enough arguments passed to script execution. Printing docstring & EXIT."
)
print __doc__
sys.exit(0)
else:
pass
# ================================================================================================
# Setup the process
# ================================================================================================
#from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import obtainAnalysisSuffix
#process = Process("QCDMeasurement"+obtainAnalysisSuffix(sys.argv))
process = Process(prefix, postfix, opts.nEvts)
# ================================================================================================
# Add the datasets (according to user options)
# ================================================================================================
if (opts.includeOnlyTasks):
Print("Adding only dataset %s from multiCRAB directory %s" %
(opts.includeOnlyTasks, opts.mcrab))
process.addDatasetsFromMulticrab(
opts.mcrab, includeOnlyTasks=opts.includeOnlyTasks)
elif (opts.excludeTasks):
Print("Adding all datasets except %s from multiCRAB directory %s" %
(opts.excludeTasks, opts.mcrab))
Print(
"If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc..."
)
process.addDatasetsFromMulticrab(opts.mcrab,
excludeTasks=opts.excludeTasks)
else:
#myBlackList = [] #QCD_bEnriched"] #["ChargedHiggs", "QCD-b"]
myBlackList = [
"M_800", "M_400", "M_350", "M_3000", "M_300", "M_250", "M_220",
"M_2000", "M_200", "M_180", "M_1000", "QCD_b"
]
Print("Adding all datasets from multiCRAB directory %s except %s" %
(opts.mcrab, (",".join(myBlackList))))
Print(
"Vertex reweighting is done according to the chosen data era (%s)"
% (",".join(dataEras)))
# process.addDatasetsFromMulticrab(opts.mcrab, blacklist=myBlackList)
if len(myBlackList) > 0:
regex = "|".join(myBlackList)
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=regex)
else:
process.addDatasetsFromMulticrab(opts.mcrab)
# ================================================================================================
# Overwrite Default Settings
# ================================================================================================
from HiggsAnalysis.NtupleAnalysis.parameters.hplus2tbAnalysis import allSelections
allSelections.verbose = opts.verbose
allSelections.histogramAmbientLevel = opts.histoLevel
allSelections.BJetSelection.jetPtCuts = [40.0, 30.0]
# allSelections.BJetSelection.triggerMatchingApply = True # at least 1 trg b-jet matched to offline b-jets
# allSelections.Trigger.triggerOR = ["HLT_PFHT400_SixJet30", #Prescale 110 at inst. lumi 1.35E+34
# "HLT_PFHT450_SixJet40", #Prescale 26 at inst. lumi 1.35E+34]
# allSelections.Trigger.triggerOR = ["HLT_PFHT400_SixJet30_DoubleBTagCSV_p056"]
# allSelections.Trigger.triggerOR = ["HLT_PFHT450_SixJet40_BTagCSV_p056"]
# ================================================================================================
# Command Line Options
# ================================================================================================
# from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import applyAnalysisCommandLineOptions
# applyAnalysisCommandLineOptions(sys.argv, allSelections)
# ================================================================================================
# Build analysis modules
# ================================================================================================
PrintOptions(opts)
builder = AnalysisBuilder(prefix,
dataEras,
searchModes,
usePUreweighting=opts.usePUreweighting,
useTopPtReweighting=opts.useTopPtReweighting,
doSystematicVariations=opts.doSystematics)
# Add variations (e.g. for optimisation)
# builder.addVariation("BJetSelection.triggerMatchingApply", [True, False]) # At least 1 trg b-jet dR-matched to offline b-jets
# builder.addVariation("FakeBMeasurement.prelimTopFitChiSqrCutValue", [100, 20])
# builder.addVariation("FakeBMeasurement.prelimTopFitChiSqrCutDirection", ["<=", "==", ">="])
# builder.addVariation("FakeBMeasurement.numberOfBJetsCutValue", [0, 1])
# builder.addVariation("FakeBMeasurement.numberOfBJetsCutDirection", ["=="])
# builder.addVariation("FakeBMeasurement.numberOfBJetsCutDirection", ["<=", "==", ">="])
# builder.addVariation("FakeBMeasurement.numberOfInvertedBJetsCutValue", [0, 1])
# builder.addVariation("FakeBMeasurement.numberOfInvertedBJetsCutDirection", [">="])
# builder.addVariation("FakeBMeasurement.invertedBJetDiscr", "")
# builder.addVariation("FakeBMeasurement.invertedBJetDiscrWorkingPoint", "Loose")
# builder.addVariation("FakeBMeasurement.invertedBJetsSortType", ["Random", "DescendingBDiscriminator"])
# builder.addVariation("FakeBMeasurement.invertedBJetsDiscrMaxCutValue", [0.82, 0.80, 0.75, 0.70])
# builder.addVariation("TopSelection.ChiSqrCutValue", [100])
# builder.addVariation("Trigger.triggerOR", [["HLT_PFHT450_SixJet40"], ["HLT_PFHT400_SixJet30"]])
# builder.addVariation("TopologySelection.FoxWolframMomentCutValue", [0.5, 0.7])
builder.addVariation("Trigger.triggerOR",
[["HLT_PFHT400_SixJet30_DoubleBTagCSV_p056"],
["HLT_PFHT450_SixJet40_BTagCSV_p056"]])
# builder.addVariation("Trigger.triggerOR", [["HLT_PFHT400_SixJet30_DoubleBTagCSV_p056", "HLT_PFHT450_SixJet40_BTagCSV_p056"]])
# Build the builder
builder.build(process, allSelections)
# ================================================================================================
# Example of adding an analyzer whose configuration depends on dataVersion
# ================================================================================================
# def createAnalyzer(dataVersion):
# a = Analyzer("ExampleAnalysis")
# if dataVersion.isMC():
# a.tauPtCut = 10
# else:
# a.tauPtCut = 20
# return a
# process.addAnalyzer("test2", createAnalyzer)
# ================================================================================================
# Pick events
# ================================================================================================
# process.addOptions(EventSaver = PSet(enabled = True,pickEvents = True))
# ================================================================================================
# Run the analysis
# ================================================================================================
# Run the analysis with PROOF? You can give proofWorkers=<N> as a parameter
if opts.jCores:
Print("Running process with PROOF (proofWorkes=%s)" %
(str(opts.jCores)))
process.run(proof=True, proofWorkers=opts.jCores)
else:
Print("Running process (no PROOF)")
process.run()
return
def main():
# Save start time (epoch seconds)
tStart = time.time()
Verbose("Started @ " + str(tStart), True)
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print(
"Not enough arguments passed to script execution. Printing docstring & EXIT."
)
print __doc__
sys.exit(0)
else:
pass
# ================================================================================================
# Setup the process
# ================================================================================================
maxEvents = {}
maxEvents["All"] = opts.nEvts
process = Process(prefix, postfix, maxEvents)
# ================================================================================================
# Add the datasets (according to user options)
# ================================================================================================
if (opts.includeOnlyTasks):
Verbose("Adding only dataset %s from multiCRAB directory %s" %
(opts.includeOnlyTasks, opts.mcrab))
process.addDatasetsFromMulticrab(
opts.mcrab, includeOnlyTasks=opts.includeOnlyTasks)
myBlackList = [
"ChargedHiggs_HplusTB_HplusToTB_M_2000_ext1"
"ChargedHiggs_HplusTB_HplusToTB_M_2500_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_3000_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_1500", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_2000", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_2500", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_3000", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_5000", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_7000", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_10000", # Speeed things up
]
elif (opts.excludeTasks):
Verbose("Adding all datasets except %s from multiCRAB directory %s" %
(opts.excludeTasks, opts.mcrab))
Verbose(
"If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc..."
)
process.addDatasetsFromMulticrab(opts.mcrab,
excludeTasks=opts.excludeTasks)
else:
myBlackList = [
"QCD_b"
"ChargedHiggs_HplusTB_HplusToTB_M_180_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_200_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_220_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_250_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_300_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_350_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_400_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_500_ext1",
#"ChargedHiggs_HplusTB_HplusToTB_M_650", #10M events!
"ChargedHiggs_HplusTB_HplusToTB_M_800_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_1000_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_2000_ext1"
"ChargedHiggs_HplusTB_HplusToTB_M_2500_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_3000_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_1000",
# "ChargedHiggs_HplusTB_HplusToTB_M_1500", # Speeed things up
# "ChargedHiggs_HplusTB_HplusToTB_M_2000", # Speeed things up
# "ChargedHiggs_HplusTB_HplusToTB_M_2500", # Speeed things up
# "ChargedHiggs_HplusTB_HplusToTB_M_3000", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_5000", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_7000", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_10000", # Speeed things up
]
#if opts.doSystematics:
# myBlackList.append("QCD")
Print("Adding all datasets from multiCRAB directory %s" % (opts.mcrab))
Print(
"If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc..."
)
regex = "|".join(myBlackList)
if len(myBlackList) > 0:
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=regex)
else:
process.addDatasetsFromMulticrab(opts.mcrab)
# ================================================================================================
# Overwrite Default Settings
# ================================================================================================
from HiggsAnalysis.NtupleAnalysis.parameters.hplus2tbAnalysis import allSelections
allSelections.verbose = opts.verbose
allSelections.histogramAmbientLevel = opts.histoLevel
allSelections.TopSelectionBDT.TopMVACutValue = 0.40
allSelections.TopSelectionBDT.TopMVACutDirection = ">="
allSelections.TopSelectionBDT.WeightFile = "BDTG_DeltaR0p3_DeltaPtOverPt0p32_BJetPt40_14July2018.weight.xml"
#BDTG_DeltaR0p4_BJetPt40_25Sept2018.weights.xml
#BDTG_DeltaR0p3_DeltaPtOverPt0p50_BJetPt40_18Sept2018.weights.xml
#BDTG_DeltaR0p3_BJetPt40_17July2018.weights.xml
#BDTG_DeltaR0p3_DeltaPtOverPt0p32_BJetPt40_14July2018.weight.xml
allSelections.DeltaR = 0.3
allSelections.DeltaPtOverPt = 0.32
# ================================================================================================
# Add Analysis Variations
# ================================================================================================
# selections = allSelections.clone()
# process.addAnalyzer(prefix, Analyzer(prefix, config=selections, silent=False) ) #trigger passed from selections
# ================================================================================================
# Command Line Options
# ================================================================================================
# from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import applyAnalysisCommandLineOptions
# applyAnalysisCommandLineOptions(sys.argv, allSelections)
#================================================================================================
# Build analysis modules
#================================================================================================
PrintOptions(opts)
builder = AnalysisBuilder(prefix,
dataEras,
searchModes,
usePUreweighting=opts.usePUreweighting,
useTopPtReweighting=opts.useTopPtReweighting,
doSystematicVariations=opts.doSystematics,
analysisType="HToTB",
verbose=opts.verbose)
# Add variations (e.g. for optimisation)
# builder.addVariation("METSelection.METCutValue", [100,120,140])
# builder.addVariation("AngularCutsBackToBack.workingPoint", ["Loose","Medium","Tight"])
# builder.addVariation("BJetSelection.triggerMatchingApply", [False])
# builder.addVariation("TopSelection.ChiSqrCutValue", [5, 10, 15, 20])
# Build the builder
builder.build(process, allSelections)
# ================================================================================================
# Example of adding an analyzer whose configuration depends on dataVersion
# ================================================================================================
#def createAnalyzer(dataVersion):
#a = Analyzer("ExampleAnalysis")
#if dataVersion.isMC():
#a.tauPtCut = 10
#else:
#a.tauPtCut = 20
#return a
#process.addAnalyzer("test2", createAnalyzer)
# ================================================================================================
# Pick events
# ================================================================================================
#process.addOptions(EventSaver = PSet(enabled = True,pickEvents = True))
# ================================================================================================
# Run the analysis
# ================================================================================================
# Run the analysis with PROOF? You can give proofWorkers=<N> as a parameter
if opts.jCores:
Print("Running process with PROOF (proofWorkes=%s)" %
(str(opts.jCores)))
process.run(proof=True, proofWorkers=opts.jCores)
else:
Verbose("Running process")
process.run()
# Print total time elapsed
tFinish = time.time()
dt = int(tFinish) - int(tStart)
days = divmod(dt, 86400) # days
hours = divmod(days[1], 3600) # hours
mins = divmod(hours[1], 60) # minutes
secs = mins[1] # seconds
Print(
"Total elapsed time is %s days, %s hours, %s mins, %s secs" %
(days[0], hours[0], mins[0], secs), True)
return
def main():
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print(
"Not enough arguments passed to script execution. Printing docstring & EXIT."
)
print __doc__
sys.exit(0)
else:
pass
# ================================================================================================
# Setup the process
# ================================================================================================
process = Process(prefix, postfix, opts.nEvts)
# ================================================================================================
# Add the datasets (according to user options)
# ================================================================================================
if (opts.includeOnlyTasks):
Print("Adding only dataset %s from multiCRAB directory %s" %
(opts.includeOnlyTasks, opts.mcrab))
process.addDatasetsFromMulticrab(
opts.mcrab, includeOnlyTasks=opts.includeOnlyTasks)
elif (opts.excludeTasks):
Print("Adding all datasets except %s from multiCRAB directory %s" %
(opts.excludeTasks, opts.mcrab))
Print(
"If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc..."
)
process.addDatasetsFromMulticrab(opts.mcrab,
excludeTasks=opts.excludeTasks)
else:
Print("Adding all datasets from multiCRAB directory %s" % (opts.mcrab))
Print(
"If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc..."
)
process.addDatasetsFromMulticrab(opts.mcrab)
# ================================================================================================
# Selection customisations
# ================================================================================================
from HiggsAnalysis.NtupleAnalysis.parameters.hplus2tbAnalysis import allSelections
#from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import allSelections
# Overwrite verbosity
allSelections.verbose = opts.verbose
# Overwrite histo ambient level (Options: Systematics, Vital, Informative, Debug)
allSelections.histogramAmbientLevel = opts.histoLevel
# Set splitting of phase space (first bin is below first edge value and last bin is above last edge value)
# allSelections.CommonPlots.histogramSplitting = [
# PSet(label="tauPt", binLowEdges=[60.0, 70.0, 80.0, 100.0], useAbsoluteValues=False),
# ]
# allSelections.TauSelection.rtau = 0.0
# allSelections.BJetSelection.numberOfBJetsCutValue = 0
# allSelections.BJetSelection.numberOfBJetsCutDirection = "=="
# ================================================================================================
# Add Analysis Variations
# ================================================================================================
# selections = allSelections.clone()
# process.addAnalyzer(prefix, Analyzer(prefix, config=selections, silent=False) ) #trigger passed from selections
# ================================================================================================
# Command Line Options
# ================================================================================================
# from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import applyAnalysisCommandLineOptions
# applyAnalysisCommandLineOptions(sys.argv, allSelections)
#================================================================================================
# Build analysis modules
#================================================================================================
builder = AnalysisBuilder(prefix,
dataEras,
searchModes,
usePUreweighting=opts.puReweight,
doSystematicVariations=opts.systematics)
# Perform variations (e.g. for optimisation)
# builder.addVariation("METSelection.METCutValue", [100,120,140])
# builder.addVariation("AngularCutsBackToBack.workingPoint", ["Loose","Medium","Tight"])
# Build the builder
builder.build(process, allSelections)
# ================================================================================================
# Example of adding an analyzer whose configuration depends on dataVersion
# ================================================================================================
#def createAnalyzer(dataVersion):
#a = Analyzer("ExampleAnalysis")
#if dataVersion.isMC():
#a.tauPtCut = 10
#else:
#a.tauPtCut = 20
#return a
#process.addAnalyzer("test2", createAnalyzer)
# ================================================================================================
# Pick events
# ================================================================================================
#process.addOptions(EventSaver = PSet(enabled = True,pickEvents = True))
# ================================================================================================
# Run the analysis
# ================================================================================================
# Run the analysis with PROOF? By default it uses all cores, but you can give proofWorkers=<N> as a parameter
if opts.jCores:
Print("Running process with PROOF (proofWorkes=%s)" %
(str(opts.jCores)))
process.run(proof=True, proofWorkers=opts.jCores)
else:
Print("Running process (no PROOF)")
process.run()
def main():
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print(
"Not enough arguments passed to script execution. Printing docstring & EXIT."
)
print __doc__
sys.exit(0)
else:
pass
# ================================================================================================
# Setup the process
# ================================================================================================
maxEvents = {}
maxEvents["All"] = opts.nEvts
# maxEvents["2016"] = 1
# maxEvents["ZZTo4Q"] = -1
# maxEvents["ZJetsToQQ_HT600toInf"] = 1
# maxEvents["WZ_ext1"] = 1
# maxEvents["WZ"] = 1
# maxEvents["WWTo4Q"] = 1
# maxEvents["WJetsToQQ_HT_600ToInf"] = 1
# maxEvents["TTZToQQ"] = 1
# maxEvents["TTWJetsToQQ"] = 1
# maxEvents["TTTT"] = 1
# maxEvents["TT"] = 1
# maxEvents["ST_t_channel_top_4f_inclusiveDecays"] = 1
# maxEvents["ST_t_channel_antitop_4f_inclusiveDecays"] = 1
# maxEvents["ST_tW_top_5f_inclusiveDecays_ext1"] = 1
# maxEvents["ST_tW_top_5f_inclusiveDecays"] = 1
# maxEvents["ST_tW_antitop_5f_inclusiveDecays_ext1"] = 1
# maxEvents["ST_tW_antitop_5f_inclusiveDecays"] = 1
# maxEvents["ST_s_channel_4f_InclusiveDecays"] = 1
# maxEvents["QCD_HT700to1000_ext1"] = 1
# maxEvents["QCD_HT700to1000"] = 1
# maxEvents["QCD_HT50to100"] = 1
# maxEvents["QCD_HT500to700_ext1"] = 1
# maxEvents["QCD_HT500to700"] = 1
# maxEvents["QCD_HT300to500_ext1"] = 1
# maxEvents["QCD_HT300to500"] = 1
# maxEvents["QCD_HT200to300_ext1"] = 1
# maxEvents["QCD_HT200to300"] = 1
# maxEvents["QCD_HT2000toInf_ext1"] = 1
# maxEvents["QCD_HT2000toInf"] = 1
# maxEvents["QCD_HT1500to2000_ext1"] = 1
# maxEvents["QCD_HT1500to2000"] = 1
# maxEvents["QCD_HT100to200"] = 1
# maxEvents["QCD_HT1000to1500_ext1"] = 1
# maxEvents["QCD_HT1000to1500"] = 1
# maxEvents["JetHT_Run2016H_03Feb2017_ver3_v1_284036_284044"] = 1
# maxEvents["JetHT_Run2016H_03Feb2017_ver2_v1_281613_284035"] = 1
# maxEvents["JetHT_Run2016G_03Feb2017_v1_278820_280385"] = 1
# maxEvents["JetHT_Run2016F_03Feb2017_v1_278801_278808"] = 1
# maxEvents["JetHT_Run2016F_03Feb2017_v1_277932_278800"] = 1
# maxEvents["JetHT_Run2016E_03Feb2017_v1_276831_277420"] = 1
# maxEvents["JetHT_Run2016D_03Feb2017_v1_276315_276811"] = 1
# maxEvents["JetHT_Run2016C_03Feb2017_v1_275656_276283"] = 1
# maxEvents["JetHT_Run2016B_03Feb2017_ver2_v2_273150_275376"] = 1
# maxEvents["DYJetsToQQ_HT180"] = 1
# maxEvents["ChargedHiggs_HplusTB_HplusToTB_M_500"] = 1
process = Process(prefix, postfix, maxEvents)
# ================================================================================================
# Add the datasets (according to user options)
# ================================================================================================
if (opts.includeOnlyTasks):
Print("Adding only dataset %s from multiCRAB directory %s" %
(opts.includeOnlyTasks, opts.mcrab))
process.addDatasetsFromMulticrab(
opts.mcrab, includeOnlyTasks=opts.includeOnlyTasks)
elif (opts.excludeTasks):
Print("Adding all datasets except %s from multiCRAB directory %s" %
(opts.excludeTasks, opts.mcrab))
Print(
"If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc..."
)
process.addDatasetsFromMulticrab(opts.mcrab,
excludeTasks=opts.excludeTasks)
else:
myBlackList = [
"M_180", "M_2500", "M_3000", "M_5000", "M_7000", "M_10000", "QCD"
]
Print("Adding all datasets from multiCRAB directory %s except %s" %
(opts.mcrab, (",".join(myBlackList))))
Print(
"Vertex reweighting is done according to the chosen data era (%s)"
% (",".join(dataEras)))
# process.addDatasetsFromMulticrab(opts.mcrab, blacklist=myBlackList)
if len(myBlackList) > 0:
regex = "|".join(myBlackList)
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=regex)
else:
process.addDatasetsFromMulticrab(opts.mcrab)
# ================================================================================================
# Overwrite Default Settings
# ================================================================================================
from HiggsAnalysis.NtupleAnalysis.parameters.hplus2tbAnalysis import allSelections
allSelections.verbose = opts.verbose
allSelections.histogramAmbientLevel = opts.histoLevel
# Set splitting of phase-space (first bin is below first edge value and last bin is above last edge value)
allSelections.CommonPlots.histogramSplitting = [
PSet(label="TetrajetBjetEta",
binLowEdges=[0.4, 1.2, 1.8],
useAbsoluteValues=True),
#PSet(label="TetrajetBjetEta", binLowEdges=[0.4, 1.2], useAbsoluteValues=True),
#PSet(label="TetrajetBjetEta", binLowEdges=[1.2], useAbsoluteValues=True),
#PSet(label="TetrajetBjetEta", binLowEdges=[1.3], useAbsoluteValues=True), # good but perhaps limit to 1.2
#PSet(label="TetrajetBjetEta", binLowEdges=[0.6, 1.4], useAbsoluteValues=True), #middle bin is bad
]
# allSelections.BJetSelection.triggerMatchingApply = True # at least 1 trg b-jet matched to offline b-jets
# allSelections.Trigger.triggerOR = ["HLT_PFHT400_SixJet30_DoubleBTagCSV_p056"]
# allSelections.Trigger.triggerOR = ["HLT_PFHT450_SixJet40_BTagCSV_p056"]
# ================================================================================================
# Command Line Options
# ================================================================================================
# from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import applyAnalysisCommandLineOptions
# applyAnalysisCommandLineOptions(sys.argv, allSelections)
# ================================================================================================
# Build analysis modules
# ================================================================================================
PrintOptions(opts)
builder = AnalysisBuilder(prefix,
dataEras,
searchModes,
usePUreweighting=opts.usePUreweighting,
useTopPtReweighting=opts.useTopPtReweighting,
doSystematicVariations=opts.doSystematics)
# Add variations (e.g. for optimisation)
# builder.addVariation("BJetSelection.triggerMatchingApply", [True, False]) # At least 1 trg b-jet dR-matched to offline b-jets
# builder.addVariation("TestQGLR.prelimTopFitChiSqrCutValue", [100, 20])
# builder.addVariation("TestQGLR.prelimTopFitChiSqrCutDirection", ["<=", "==", ">="])
# builder.addVariation("TestQGLR.numberOfBJetsCutValue", [0, 1])
# builder.addVariation("TestQGLR.numberOfBJetsCutDirection", ["=="])
# builder.addVariation("TestQGLR.numberOfBJetsCutDirection", ["<=", "==", ">="])
# builder.addVariation("TestQGLR.numberOfInvertedBJetsCutValue", [0, 1])
# builder.addVariation("TestQGLR.numberOfInvertedBJetsCutDirection", [">="])
# builder.addVariation("TestQGLR.invertedBJetDiscr", "")
# builder.addVariation("TestQGLR.invertedBJetDiscrWorkingPoint", "Loose")
# builder.addVariation("TestQGLR.invertedBJetsSortType", ["Random", "DescendingBDiscriminator"])
# builder.addVariation("TestQGLR.invertedBJetsDiscrMaxCutValue", [0.82, 0.80, 0.75, 0.70])
# builder.addVariation("TopSelection.ChiSqrCutValue", [100])
# builder.addVariation("Trigger.triggerOR", [["HLT_PFHT450_SixJet40"], ["HLT_PFHT400_SixJet30"]])
# builder.addVariation("TopologySelection.FoxWolframMomentCutValue", [0.5, 0.7])
# builder.addVariation("Trigger.triggerOR", [["HLT_PFHT400_SixJet30_DoubleBTagCSV_p056"], ["HLT_PFHT450_SixJet40_BTagCSV_p056"]])
# builder.addVariation("Trigger.triggerOR", [["HLT_PFHT400_SixJet30_DoubleBTagCSV_p056", "HLT_PFHT450_SixJet40_BTagCSV_p056"]])
# Build the builder
builder.build(process, allSelections)
# ================================================================================================
# Example of adding an analyzer whose configuration depends on dataVersion
# ================================================================================================
# def createAnalyzer(dataVersion):
# a = Analyzer("ExampleAnalysis")
# if dataVersion.isMC():
# a.tauPtCut = 10
# else:
# a.tauPtCut = 20
# return a
# process.addAnalyzer("test2", createAnalyzer)
# ================================================================================================
# Pick events
# ================================================================================================
# process.addOptions(EventSaver = PSet(enabled = True,pickEvents = True))
# ================================================================================================
# Run the analysis
# ================================================================================================
# Run the analysis with PROOF? You can give proofWorkers=<N> as a parameter
if opts.jCores:
Print("Running process with PROOF (proofWorkes=%s)" %
(str(opts.jCores)))
process.run(proof=True, proofWorkers=opts.jCores)
else:
Print("Running process (no PROOF)")
process.run()
return
def main():
# Save start time (epoch seconds)
tStart = time.time()
Verbose("Started @ " + str(tStart), True)
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print("Not enough arguments passed to script execution. Printing docstring & EXIT.")
print __doc__
sys.exit(0)
else:
pass
# ================================================================================================
# Setup the process
# ================================================================================================
maxEvents = {}
maxEvents["All"] = opts.nEvts
process = Process(prefix, postfix, maxEvents)
# ================================================================================================
# Add the datasets (according to user options)
# ================================================================================================
if (opts.includeOnlyTasks):
Print("Adding only dataset %s from multiCRAB directory %s" % (opts.includeOnlyTasks, opts.mcrab))
process.addDatasetsFromMulticrab(opts.mcrab, includeOnlyTasks=opts.includeOnlyTasks)
elif (opts.excludeTasks):
Print("Adding all datasets except %s from multiCRAB directory %s" % (opts.excludeTasks, opts.mcrab))
Print("If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc...")
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=opts.excludeTasks)
else:
myBlackList = ["QCD_b"
"ChargedHiggs_HplusTB_HplusToTB_M_180_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_200_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_220_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_250_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_300_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_350_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_400_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_500_ext1",
#"ChargedHiggs_HplusTB_HplusToTB_M_650", #10M events!
"ChargedHiggs_HplusTB_HplusToTB_M_800_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_1000_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_2000_ext1"
"ChargedHiggs_HplusTB_HplusToTB_M_2500_ext1",
"ChargedHiggs_HplusTB_HplusToTB_M_3000_ext1",
# "ChargedHiggs_HplusTB_HplusToTB_M_1000",
"ChargedHiggs_HplusTB_HplusToTB_M_1500", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_2000", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_2500", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_3000", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_5000", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_7000", # Speeed things up
"ChargedHiggs_HplusTB_HplusToTB_M_10000", # Speeed things up
]
if opts.doSystematics:
myBlackList.append("QCD")
Print("Adding all datasets from multiCRAB directory %s" % (opts.mcrab))
Print("If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc...")
regex = "|".join(myBlackList)
if len(myBlackList)>0:
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=regex)
else:
process.addDatasetsFromMulticrab(opts.mcrab)
# ================================================================================================
# Overwrite Default Settings
# ================================================================================================
from HiggsAnalysis.NtupleAnalysis.parameters.jetTriggers import allSelections
from HiggsAnalysis.NtupleAnalysis.main import PSet
import HiggsAnalysis.NtupleAnalysis.parameters.scaleFactors as scaleFactors
allSelections.verbose = opts.verbose
allSelections.histogramAmbientLevel = opts.histoLevel
#==========================
# Systematics selections
#==========================
# marina
allSelections.SystTopBDTSelection.MVACutValue = 0.40
allSelections.TopSelectionBDT.TopMVACutValue = 0.40
# BDT MisID SF
MisIDSF = PSet(
MisIDSFJsonName = "topMisID_BDT0p40_TopMassCut400.json",
ApplyMisIDSF = False,
)
scaleFactors.assignMisIDSF(MisIDSF, "nominal", MisIDSF.MisIDSFJsonName)
allSelections.MisIDSF = MisIDSF
allSelections.SystTopBDTSelection.MiniIsoCutValue = 0.1
allSelections.SystTopBDTSelection.MiniIsoInvCutValue = 0.1
allSelections.SystTopBDTSelection.METCutValue = 50.0
allSelections.SystTopBDTSelection.METInvCutValue = 20.0
# Muon
allSelections.MuonSelection.muonPtCut = 30
# Jets
allSelections.JetSelection.numberOfJetsCutValue = 4
allSelections.JetSelection.jetPtCuts = [40.0, 40.0, 40.0, 40.0]
# Trigger
allSelections.Trigger.triggerOR = ["HLT_Mu50"]
# Bjets
allSelections.BJetSelection.jetPtCuts = [40.0, 40.0]
allSelections.BJetSelection.numberOfBJetsCutValue = 2
# ================================================================================================
# Add Analysis Variations
# ================================================================================================
# selections = allSelections.clone()
# process.addAnalyzer(prefix, Analyzer(prefix, config=selections, silent=False) ) #trigger passed from selections
# ================================================================================================
# Command Line Options
# ================================================================================================
# from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import applyAnalysisCommandLineOptions
# applyAnalysisCommandLineOptions(sys.argv, allSelections)
#================================================================================================
# Build analysis modules
#================================================================================================
PrintOptions(opts)
builder = AnalysisBuilder(prefix,
dataEras,
searchModes,
usePUreweighting = opts.usePUreweighting,
useTopPtReweighting = opts.useTopPtReweighting,
doSystematicVariations = opts.doSystematics,
analysisType="HToTB")
# Add variations (e.g. for optimisation)
# builder.addVariation("METSelection.METCutValue", [100,120,140])
# builder.addVariation("AngularCutsBackToBack.workingPoint", ["Loose","Medium","Tight"])
# builder.addVariation("BJetSelection.triggerMatchingApply", [False])
# builder.addVariation("TopSelection.ChiSqrCutValue", [5, 10, 15, 20])
# Build the builder
builder.build(process, allSelections)
# ================================================================================================
# Example of adding an analyzer whose configuration depends on dataVersion
# ================================================================================================
#def createAnalyzer(dataVersion):
#a = Analyzer("ExampleAnalysis")
#if dataVersion.isMC():
#a.tauPtCut = 10
#else:
#a.tauPtCut = 20
#return a
#process.addAnalyzer("test2", createAnalyzer)
# ================================================================================================
# Pick events
# ================================================================================================
#process.addOptions(EventSaver = PSet(enabled = True,pickEvents = True))
# ================================================================================================
# Run the analysis
# ================================================================================================
# Run the analysis with PROOF? You can give proofWorkers=<N> as a parameter
if opts.jCores:
Print("Running process with PROOF (proofWorkes=%s)" % ( str(opts.jCores) ) )
process.run(proof=True, proofWorkers=opts.jCores)
else:
Print("Running process")
process.run()
# Print total time elapsed
tFinish = time.time()
dt = int(tFinish) - int(tStart)
days = divmod(dt,86400) # days
hours = divmod(days[1],3600) # hours
mins = divmod(hours[1],60) # minutes
secs = mins[1] # seconds
Print("Total elapsed time is %s days, %s hours, %s mins, %s secs" % (days[0], hours[0], mins[0], secs), True)
return
def main():
# Save start time (epoch seconds)
tStart = time.time()
Verbose("Started @ " + str(tStart), True)
# Require at least two arguments (script-name, path to multicrab)
if len(sys.argv) < 2:
Print("Not enough arguments passed to script execution. Printing docstring & EXIT.")
print __doc__
sys.exit(0)
else:
pass
# ================================================================================================
# Setup the process
# ================================================================================================
completeList = GetDatasetCompleteList()
whiteList = GetDatasetWhitelist(opts)
blackList = GetDatasetBlackList(completeList, whiteList)
maxEvents = {}
for d in whiteList:
maxEvents[d] = -1
#if d == "ChargedHiggs_HplusTB_HplusToTB_M_650":
# maxEvents[d] = 4000000
process = Process(prefix, postfix, maxEvents)
# ================================================================================================
# Add the datasets (according to user options)
# ================================================================================================
if (opts.includeOnlyTasks):
Verbose("Adding only dataset %s from multiCRAB directory %s" % (opts.includeOnlyTasks, opts.mcrab))
process.addDatasetsFromMulticrab(opts.mcrab, includeOnlyTasks=opts.includeOnlyTasks)
elif (opts.excludeTasks):
Verbose("Adding all datasets except %s from multiCRAB directory %s" % (opts.excludeTasks, opts.mcrab))
Print("If collision data are present, then vertex reweighting is done according to the chosen data era (era=2015C, 2015D, 2015) etc...")
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=opts.excludeTasks)
else:
myBlackList = blackList
#myBlackList = ["M_180", "M_200" , "M_220" , "M_250" , "M_300" , "M_350" , "M_400" , "M_500" , "M_650",
# "M_800", "M_1000", "M_1500", "M_2000", "M_2500", "M_3000", "M_5000", "M_7000", "M_10000"]
# Extend the blacklist with datasets not in the group
#myBlackList.extend(blackList)
Verbose("Adding all datasets from multiCRAB directory %s except %s" % (opts.mcrab, (",".join(myBlackList))) )
Verbose("Vertex reweighting is done according to the chosen data era (%s)" % (",".join(dataEras)) )
regex = "|".join(myBlackList)
if len(myBlackList) > 0:
process.addDatasetsFromMulticrab(opts.mcrab, excludeTasks=regex)
else:
process.addDatasetsFromMulticrab(opts.mcrab)
# ================================================================================================
# Overwrite Default Settings
# ================================================================================================
from HiggsAnalysis.NtupleAnalysis.parameters.hplus2tbAnalysis import allSelections
allSelections.verbose = opts.verbose
allSelections.histogramAmbientLevel = opts.histoLevel
# Set splitting of phase-space (first bin is below first edge value and last bin is above last edge value)
allSelections.CommonPlots.histogramSplitting = [
# PSet(label="TetrajetBjetPt" , binLowEdges=[50, 160, 300], useAbsoluteValues=False), # last (not bad)
# PSet(label="TetrajetBjetPt" , binLowEdges=[50, 120, 300], useAbsoluteValues=False), # last (not bad)
#PSet(label="TetrajetBjetPt" , binLowEdges=[50, 150, 300], useAbsoluteValues=False), # last (quite good)
# PSet(label="TetrajetBjetPt" , binLowEdges=[50, 60, 150], useAbsoluteValues=False),
# PSet(label="TetrajetBjetPt" , binLowEdges=[60, 90, 160, 300], useAbsoluteValues=False), # BEST (v1)
# PSet(label="TetrajetBjetPt" , binLowEdges=[50, 60, 90, 160, 330], useAbsoluteValues=False),
PSet(label="TetrajetBjetPt" , binLowEdges=[60, 90, 160, 300], useAbsoluteValues=False), # BEST (v2)
#PSet(label="TetrajetBjetPt" , binLowEdges=[60, 90, 160, 300], useAbsoluteValues=False), # BEST (v3)
# PSet(label="TetrajetBjetPt" , binLowEdges=[50, 65, 130, 330], useAbsoluteValues=False), # BEST (v4)
# PSet(label="TetrajetBjetPt" , binLowEdges=[50, 65, 95, 130, 330], useAbsoluteValues=False), # BEST (v5)
# PSet(label="TetrajetBjetPt" , binLowEdges=[45, 50, 60, 90, 160, 330], useAbsoluteValues=False), # BEST (v5)
#
PSet(label="TetrajetBjetEta", binLowEdges=[0.8, 1.4, 2.0], useAbsoluteValues=True), # optimised
]
# Overwrite values
# allSelections.TopSelectionBDT.CSV_bDiscCutDirection = ">="
allSelections.TopSelectionBDT.CSV_bDiscCutValue = 0.54 # allow CSVv2-L for inverted top
# ================================================================================================
# Command Line Options
# ================================================================================================
# from HiggsAnalysis.NtupleAnalysis.parameters.signalAnalysisParameters import applyAnalysisCommandLineOptions
# applyAnalysisCommandLineOptions(sys.argv, allSelections)
# ================================================================================================
# Build analysis modules
# ================================================================================================
PrintOptions(opts)
builder = AnalysisBuilder(prefix,
dataEras,
searchModes,
usePUreweighting = opts.usePUreweighting,
useTopPtReweighting = opts.useTopPtReweighting,
doSystematicVariations = opts.doSystematics,
analysisType="HToTB",
verbose=opts.verbose,
systVarsList=opts.systVarsList)
# Add variations (e.g. for optimisation)
# builder.addVariation("BJetSelection.triggerMatchingApply", [True, False]) # At least 1 trg b-jet dR-matched to offline b-jets
# builder.addVariation("FakeBMeasurement.prelimTopFitChiSqrCutValue", [100, 20])
# builder.addVariation("FakeBMeasurement.prelimTopFitChiSqrCutDirection", ["<=", "==", ">="])
# builder.addVariation("FakeBMeasurement.numberOfBJetsCutValue", [0, 1])
# builder.addVariation("FakeBMeasurement.numberOfBJetsCutDirection", ["=="])
# builder.addVariation("FakeBMeasurement.numberOfBJetsCutDirection", ["<=", "==", ">="])
# builder.addVariation("FakeBMeasurement.numberOfInvertedBJetsCutValue", [0, 1])
# builder.addVariation("FakeBMeasurement.numberOfInvertedBJetsCutDirection", [">="])
# builder.addVariation("FakeBMeasurement.invertedBJetDiscr", "")
# builder.addVariation("FakeBMeasurement.invertedBJetDiscrWorkingPoint", "Loose")
# builder.addVariation("FakeBMeasurement.invertedBJetsSortType", ["Random", "DescendingBDiscriminator"])
# builder.addVariation("FakeBMeasurement.invertedBJetsDiscrMaxCutValue", [0.82, 0.80, 0.75, 0.70])
# builder.addVariation("TopSelection.ChiSqrCutValue", [100])
# builder.addVariation("Trigger.triggerOR", [["HLT_PFHT450_SixJet40"], ["HLT_PFHT400_SixJet30"]])
# builder.addVariation("TopologySelection.FoxWolframMomentCutValue", [0.5, 0.7])
# builder.addVariation("Trigger.triggerOR", [["HLT_PFHT400_SixJet30_DoubleBTagCSV_p056"], ["HLT_PFHT450_SixJet40_BTagCSV_p056"]])
# builder.addVariation("Trigger.triggerOR", [["HLT_PFHT400_SixJet30_DoubleBTagCSV_p056", "HLT_PFHT450_SixJet40_BTagCSV_p056"]])
# Build the builder
builder.build(process, allSelections)
# ================================================================================================
# Example of adding an analyzer whose configuration depends on dataVersion
# ================================================================================================
# def createAnalyzer(dataVersion):
# a = Analyzer("ExampleAnalysis")
# if dataVersion.isMC():
# a.tauPtCut = 10
# else:
# a.tauPtCut = 20
# return a
# process.addAnalyzer("test2", createAnalyzer)
# ================================================================================================
# Pick events
# ================================================================================================
# process.addOptions(EventSaver = PSet(enabled = True,pickEvents = True))
# ================================================================================================
# Run the analysis
# ================================================================================================
# Run the analysis with PROOF? You can give proofWorkers=<N> as a parameter
if opts.jCores:
Print("Running process with PROOF (proofWorkes=%s)" % ( str(opts.jCores) ) )
process.run(proof=True, proofWorkers=opts.jCores)
else:
Print("Running process (no PROOF)")
process.run()
# Print total time elapsed
tFinish = time.time()
dt = int(tFinish) - int(tStart)
days = divmod(dt,86400) # days
hours = divmod(days[1],3600) # hours
mins = divmod(hours[1],60) # minutes
secs = mins[1] # seconds
Print("Total elapsed time is %s days, %s hours, %s mins, %s secs" % (days[0], hours[0], mins[0], secs), True)
return