Exemplo n.º 1
0
    def initializeNetwork(self, network):

        self.event = Event()
        self.__message_buffer = []

        # Network Configuration
        self._networkManager = NetworkManager.NetworkManager(
            self.event, network)

        # This registers the message buffering feature based on network availability.
        self.event.subscribe('network.connected', self.__clear_payload_buffer)
        self.event.subscribe('network.disconnected',
                             self._networkManager.networkDisconnected)
Exemplo n.º 2
0
    def __init__(self,
                 device_name=None,
                 baud_rate='9600',
                 chatscript_file=None,
                 event=Event()):

        super(Modem, self).__init__(device_name=device_name,
                                    baud_rate=baud_rate,
                                    event=event)

        self.serial_port = None
        self.timeout = Modem.DEFAULT_SERIAL_TIMEOUT
        self.response = []
        self._at_sockets_available = False
        self.urc_state = Modem.SOCKET_INIT
        self._socket_receive_buffer = deque()
        self.socket_identifier = 0
        self.last_read_payload_length = 0
        self.result = ModemResult.OK
        self.debug_out = ''
        self.in_ext = False

        self._initialize_device_name(device_name)

        self._initialize_chatscript_file(chatscript_file)

        # This serial mode device name/port will always be equivalent to whatever the
        # default port is for the specific modem.
        self._mode = None
        self.initialize_serial_interface()
        self.logger.info('Instantiated a %s interface with device name of %s',
                         self.__repr__(), self.device_name)
Exemplo n.º 3
0
    def __init__(self,
                 device_name=None,
                 baud_rate='9600',
                 chatscript_file=None,
                 event=Event()):

        super(Modem, self).__init__(device_name=device_name,
                                    baud_rate=baud_rate,
                                    event=event)

        self.carrier = None
        self.serial_port = None
        self.timeout = Modem.DEFAULT_SERIAL_TIMEOUT
        self.response = []
        self._at_sockets_available = False
        self.urc_state = Modem.SOCKET_INIT
        self.last_location = None
        self.last_send_response = None
        self._socket_receive_buffer = deque()
        self.socket_identifier = 0
        self.last_read_payload_length = 0
        self.last_sim_otp_command_response = None
        self.result = ModemResult.OK
        self.debug_out = ''
        self.gsm = u"@£$¥èéùìòÇ\nØø\rÅåΔ_ΦΓΛΩΠΨΣΘΞ ÆæßÉ !\"#¤%&'()*+,-./0123456789:;<=>?¡ABCDEFGHIJKLMNOPQRSTUVWXYZÄÖÑܧ¿abcdefghijklmnopqrstuvwxyzäöñüà"
        self.in_ext = False
        self.ext = {
            0x40: u'|',
            0x14: u'^',
            0x65: u'€',
            0x28: u'{',
            0x29: u'}',
            0x3C: u'[',
            0x3D: u'~',
            0x3E: u']',
            0x2F: u'\\',
        }

        if device_name is None:
            devices = self.detect_usable_serial_port()
            if not devices:
                raise SerialError('Unable to detect a usable serial port')
            self.device_name = devices[0]

        if chatscript_file is None:
            # Get the absolute path of the chatscript file.
            self.chatscript_file = os.path.dirname(
                __file__) + DEFAULT_CHATSCRIPT_PATH
        else:
            self.chatscript_file = chatscript_file

        self.logger.info('chatscript file: %s', self.chatscript_file)

        # This serial mode device name/port will always be equivalent to whatever the
        # default port is for the specific modem.
        self._mode = None
        self.initialize_serial_interface()
        self.logger.info('Instantiated a %s interface with device name of %s',
                         self.__repr__(), self.device_name)
Exemplo n.º 4
0
    def __init__(self, device_name='/dev/ttyUSB0', baud_rate='9600', event=Event()):
        # Logging setup.
        self.logger = logging.getLogger(__name__)
        self.logger.addHandler(NullHandler())

        self.event = event
        self.device_name = device_name
        self.baud_rate = baud_rate
Exemplo n.º 5
0
class BLE(Network):
    def __init__(self):
        self.event = Event()
        super().__init__()

    def connect(self):
        self.event.broadcast('ble.connected')
        return True

    def disconnect(self):
        self.event.broadcast('ble.disconnected')
        return True

    def getConnectionStatus(self):
        raise Exception('BLE mode doesn\'t support this call yet')

    def reconnect(self):
        return True
Exemplo n.º 6
0
    def __init__(self,
                 device_name=None,
                 baud_rate='9600',
                 chatscript_file=None,
                 event=Event()):

        super(Nova, self).__init__(device_name=device_name,
                                   baud_rate=baud_rate,
                                   chatscript_file=chatscript_file,
                                   event=event)
Exemplo n.º 7
0
 def __init__(self, device_name=None, baud_rate='9600',
              chatscript_file=None, event=Event()):
     super().__init__(device_name=device_name, baud_rate=baud_rate,
                                      chatscript_file=chatscript_file, event=event)
     self._at_sockets_available = True
     modem_id = self.modem_id
     self.baud_rate = '115200'
     if("R404" in modem_id):
         self.is_r410 = False
     else:
         self.is_r410 = True
Exemplo n.º 8
0
    def __init__(self, device_name=None, baud_rate='9600',
                 chatscript_file=None, event=Event()):

        super(Nova_U201, self).__init__(device_name=device_name, baud_rate=baud_rate,
                                        chatscript_file=chatscript_file, event=event)
        # We need to enforce multi serial port support. We then reinstantiate
        # the serial interface with the correct device name.
        self.enforce_nova_modem_mode()
        self._at_sockets_available = True
        self.last_sim_otp_command_response = None
        self.last_location = None
    def __init__(self,
                 device_name=None,
                 baud_rate='9600',
                 chatscript_file=None,
                 event=Event()):

        super(NovaM_R404, self).__init__(device_name=device_name,
                                         baud_rate=baud_rate,
                                         chatscript_file=chatscript_file,
                                         event=event)
        self._at_sockets_available = True
Exemplo n.º 10
0
    def __init__(self,
                 device_name=None,
                 baud_rate='9600',
                 chatscript_file=None,
                 event=Event()):

        super().__init__(device_name=device_name,
                         baud_rate=baud_rate,
                         chatscript_file=chatscript_file,
                         event=event)
        self._at_sockets_available = True
        self.urc_response = ''
Exemplo n.º 11
0
 def __init__(self):
     self.event = Event()
     super().__init__()
Exemplo n.º 12
0
class Cloud:
    def __repr__(self):
        return type(self).__name__

    def __init__(self,
                 credentials,
                 send_host='',
                 send_port=0,
                 receive_host='',
                 receive_port=0,
                 network=''):

        # Logging setup.
        self.logger = logging.getLogger(__name__)
        self.logger.addHandler(NullHandler())

        self.authentication = None

        # Host and port configuration
        self.__initialize_host_and_port(send_host, send_port, receive_host,
                                        receive_port)

        self.initializeNetwork(network)

    def __initialize_host_and_port(self, send_host, send_port, receive_host,
                                   receive_port):
        self.send_host = send_host
        self.send_port = send_port
        self.receive_host = receive_host
        self.receive_port = receive_port

    def initializeNetwork(self, network):

        self.event = Event()
        self.__message_buffer = []

        # Network Configuration
        self._networkManager = NetworkManager.NetworkManager(
            self.event, network)

        # This registers the message buffering feature based on network availability.
        self.event.subscribe('network.connected', self.__clear_payload_buffer)
        self.event.subscribe('network.disconnected',
                             self._networkManager.networkDisconnected)

    # EFFECTS: Adds the given payload to the buffer
    def addPayloadToBuffer(self, payload):
        self.__message_buffer.append(payload)

    # EFFECTS: Tells the network manager that it is connected and clears all buffered
    #          messages by sending them to the cloud.
    def __clear_payload_buffer(self):
        self._networkManager.networkConnected()
        for payload in self.__message_buffer:

            recv = self.sendMessage(payload)
            self.logger.info(
                "A buffered message has been sent since an active connection is established"
            )
            self.logger.debug("The buffered message sent is: %s", str(payload))
            self.logger.info("The buffered response is: %s", str(recv))

    def sendMessage(self, messages, topics=None):
        raise NotImplementedError('Must instantiate a Cloud type')

    # EFFECTS: Sends the SMS to the destination number specified.
    def sendSMS(self, destination_number, message):
        raise NotImplementedError('Must instantiate a Cloud type')

    @property
    def authentication(self):
        return self._authentication

    @authentication.setter
    def authentication(self, authentication):
        self._authentication = authentication

    @property
    def credentials(self):
        return self.authentication.credentials

    @credentials.setter
    def credentials(self, credentials):
        self.authentication.credentials = credentials

    @property
    def version(self):
        return __version__

    @property
    def send_host(self):
        return self._send_host

    @send_host.setter
    def send_host(self, send_host):
        self._send_host = send_host

    @property
    def send_port(self):
        return self._send_port

    @send_port.setter
    def send_port(self, send_port):
        try:
            self._send_port = int(send_port)
        except ValueError as e:
            raise ValueError(
                'Invalid port parameter. Unable to convert port to a valid integer'
            )

    @property
    def receive_host(self):
        return self._receive_host

    @receive_host.setter
    def receive_host(self, receive_host):
        self._receive_host = receive_host

    @property
    def receive_port(self):
        return self._receive_port

    @receive_port.setter
    def receive_port(self, receive_port):
        self._receive_port = int(receive_port)

    @property
    def event(self):
        return self._event

    @event.setter
    def event(self, event):
        self._event = event

    @property
    def network_type(self):
        return repr(self._networkManager)

    # Returns the network instance itself.
    @property
    def network(self):
        return self._networkManager.network
Exemplo n.º 13
0
 def __init__(self, event=Event()):
     super().__init__(event=event)
     self._connection_status = CLOUD_DISCONNECTED
     self._modem = None
     self._route = Route()
     self.__receive_port = None
Exemplo n.º 14
0
 def __init__(self, event=Event()):
     self.event = event
     # Logging setup.
     self.logger = logging.getLogger(__name__)
     self.logger.addHandler(NullHandler())
Exemplo n.º 15
0
 def __init__(self, event=Event()):
     self.event = event
     # Logging setup.
     self.logger = logging.getLogger(__name__)
     self.logger.addHandler(NullHandler())
     self.scope = NetworkScope.SYSTEM
Exemplo n.º 16
0
 def test_create(self):
     event = Event()