def get_1d_root_histo(r_histo):
# get approriate histogram
hr = bi.get_histo_data(r_histo)
# make arrays with the correct shape
hr.make_arrays()
# make a histo1d
hd = B.histo(bin_center=hr.xb, bin_content=hr.cont, bin_error=hr.dcont)
# transfer the labels and title
title = r_histo.GetName()
xl = (r_histo.GetXaxis()).GetTitle()
hd.xlabel = xl
hd.title = title
return hd
# S0 are the sigma values from the fit
S0 = np.ones_like(M_inv_sel[:])
do_plot = False
#%%
for i, M_inv_loc in enumerate(M_inv_sel[:]):
# select neghboring events for the current event combine distance of costheta and phi normalized by pythagorian theorem
i_near = np.argsort(
np.sqrt((dcos_theta_etap_gj_m_norm[i]**2 +
dphi_etap_gj_m_norm[i]**2)))[:n_near]
M_inv_neighbor = M_inv_sel[i_near]
h = B.histo(M_inv_neighbor, bins=22)
h_sel = h.bin_content > 0
M = h.bin_center[h_sel]
C = h.bin_content[h_sel]
dC = h.bin_error[h_sel]
A = B.Parameter(C.max(), 'A')
x0 = B.Parameter(0.956, 'x0')
sigma = B.Parameter(.005, 'sigma')
a0 = B.Parameter(1., 'a0')
a1 = B.Parameter(1., 'a1')
fit = B.genfit(signal, [A, x0, sigma, a0, a1],
x=M,
y=C,
y_err=dC,
else:
Em_cont = pl.contour(X, Y, Em_mid, v, cmap=colormap)
pl.legend(fontsize=12, loc='upper left')
h_range = (0.6, 1.6)
r0 = []
f2 = pl.figure(2)
for i, PDv in enumerate(PD_views):
icol = ch[i]
rr = []
for v in PDv:
rr.append(get_zero_crossing(v))
rr = np.array(rr)
r = rr.mean()
h = B.histo(rr, range=h_range, bins=200)
h.plot(color=colors[icol])
sig_r = np.sqrt(rr.var())
r0.append([h, r, sig_r, rr])
# all done
pl.xlabel('R (m)')
pl.ylabel('counts')
pl.title('mid-plane Radius')
# pl.savefig(orbit_dir+'image.png')
pl.show()
def zoom_in(x_lim, y_lim):
# axes = li.ax1.get_axes()
axes = li.ax1
qb_sel = np.abs(bkg_fit(metap, mpi0))
qs_sel = np.abs(peak_fit(metap, mpi0))
q = qs_sel / (qb_sel + qs_sel)
qs = q
qb = 1 - q
#%%
#sel = (mep_min < metap) & (metap < mep_max)
#meta = meta[sel]
#qs_for_eta = qs[sel]
he_ws2d = B.histo(meta,
bins=24,
weights=qs,
title='$\eta$',
xlabel='M($\gamma\gamma$)')
he = B.histo(meta, bins=24)
plt.figure()
he_ws2d.show_fit_list()
he_ws2d.set_fit_list(fit=['A', 'mean', 'sigma', 'b0', 'b1', 'b2'])
he_ws2d.fit()
he_ws2d.plot_exp()
he_ws2d.plot_fit()
he_ws2d.title = '$\eta$'
he_ws2d.x_lable = '$M(\gamma\gamma)$'
b0 = he_ws2d.b0.value
mpipp = d['mpipp']
mpi0p = d['mpi0p']
mpippimpi0 = d['mpippimpi0']
cost_pi0 = d['cost_pi0']
pi0phiGJ = d['pi0phiGJ']
cost_etap = d['cost_etap']
etaprimephiGJ = d['etaprimephiGJ']
#%%
mep_bins = 18
mep_min = 0.86
mep_max = 1.05
h = B.histo( metap, bins = mep_bins,
range = [mep_min, mep_max] , title = 'etaprime', xlabel = "$M(\pi^{+}\pi^{-}\eta)$",
)
M = h.bin_center
C = h.bin_content
dC = h.bin_error
mr = np.linspace(M[0], M[-1], 1000)
f = cf.gauss_fit()
# set initial parameters for fitting
f.A.set(C.max())
f.x0.set(0.956)
f.sigma.set(0.01)
f.b0.set(0.05)
f.db0.set(0.5)
f.c0.set(500)
#d = np.load('/Users/rupeshdotel/analysis/work/pi0pippimeta/data/fitpi0.npz')
#d = np.load('/Users/rupeshdotel/analysis/work/pi0pippimeta/data/qfactor_data/pi0qfactor_0303.npz')
#d = np.load('/Users/rupeshdotel/analysis/work/pi0pippimeta/data/qfactor_data/etapdata.npz')
#mass = d['metap']
#d = np.load('/Users/rupeshdotel/analysis/work/pi0pippimeta/data/qfactor_data/selected_events_18_08_pwa.npz')
d = np.load(
'/Users/rupeshdotel/analysis/work/pi0pippimeta/data/qfactor_data/cons_17_18_pol_0.npz'
)
mass = d['metap']
#d = np.load('/Users/rupeshdotel/analysis/work/pi0pippimeta/data/qfactor_data/pi0data.npz')
#mass = d['mpi0']
h = B.histo(mass, bins=20, range=[0.85, 1.05])
#%%
#h = B.histo(mass, bins = 20)
M = h.bin_center
C = h.bin_content
dC = h.bin_error
dM = M[1] - M[0]
# get the bin width
#dM = d.par.get_value('dx')
# get the histogram data
#M = d['xb']
#C = d['cont']
#dC = d['dcont']
#dC = np.sqrt(C)
h2_ep_cost_ac = B.histo2d(m_etappi0_ac,
cost_etap_ac,
bins=(bins_metappi0, bins_cost),
range=[[metappi0_min, metappi0_max],
[cost_min, cost_max]],
title="Angular distribution in GJ Frame")
h2_ep_cost_gen = B.histo2d(m_etappi0_gen,
cost_etap_gen,
bins=(bins_metappi0, bins_cost),
range=[[metappi0_min, metappi0_max],
[cost_min, cost_max]],
title="Angular distribution in GJ Frame")
#%%
m_gen = B.histo(m_etappi0_gen, bins=100)
m_ac = B.histo(m_etappi0_ac, bins=100)
m_acceptance = m_ac / m_gen
#%%
cost_etap_gen = B.histo(cost_etap_gen, bins=100)
cost_etap_ac = B.histo(cost_etap_ac, bins=100)
costheta_acceptance = cost_etap_ac / cost_etap_gen
#%%
acceptance_2d = h2_ep_cost_ac / h2_ep_cost_gen
# script to try out histogramming
import LT.box as B
# get the file
mcf = B.get_file("counts.data")
# see what is in there
mcf.show_keys()
# get some data
ne = B.get_data(mcf, "n")
counts = B.get_data(mcf, "counts")
# make a hisrogram of the values
hh = B.histo(counts, range=(120.0, 180.0), bins=60)
# set the initial values for fitting
hh.A.set(2)
hh.mean.set(140)
hh.sigma.set(10)
# fit the peak
hh.fit()
# plot the histogram
hh.plot()
B.pl.show()
# plot the fit
hh.plot_fit()
B.pl.show()
#get veto bools
veto_2pi0m = ~ ((pi013m & pi024m) | (pi014m & pi023m)) #choose 2pi0 veto logic
veto_omegam = ~(omegam) #veto omega
veto_deltapm = ~(pi0pm) #veto deltap
#combine veto bools in increasing complexity
#veto = veto_2pi0m & veto_omegam
vetom = veto_2pi0m & veto_omegam & veto_deltapm
selm = sel_winm & vetom
"""
#%%
h_mm2m = B.histo(mm2m, bins=30, title="missing mass squared")
h_etap = B.histo(metap[sel],
bins=24,
title="$\eta^{'}$",
xlabel="$M(\pi^{+}\pi^{-}\eta)")
h_etap_pi0 = B.histo2d(metap[sel],
mpi0[sel],
bins=24,
title=" pi0 vs etaprime Kinfit variables",
xlabel="$M(\pi^{+}\pi^{-}\eta)$",
ylabel="$M(\gamma\gamma)$")
h_etappi0 = B.histo(metappi0[sel],
bins=40,
box = []
num = 10000
for ii in range(num):
x1 = random.random()
y1 = random.random()
z1 = np.sqrt(-2 * np.log(x1)) * np.cos(2 * np.pi * y1)
box.append(z1)
xbin.append(x1)
mean = np.average(xbin)
SD = np.std(xbin)
graph = B.histo(box, range=(-4, 4), bins=50)
graphx = graph.bin_center
graphy = graph.bin_content
miu = param.Parameter(mean, 'mu')
sigma = param.Parameter(SD, 'sigma')
height = param.Parameter(700., 'height')
factor = len(box) * (8. / 40.)
def gauss(x):
gaussgraph = stats.norm.pdf((x - miu()) / sigma()) * factor
return gaussgraph
def time_slice_data(self):
# get data
a_data = analysis_data(self)
# good data
tg = a_data.tg
Ag = a_data.Ag
# all pos. data
tp = a_data.tp
Ap = a_data.Ap
# histogram setup
h_min = self.par['h_min']
h_max = self.par['h_max']
h_bins = self.par['h_bins']
h_range = (h_min, h_max)
#if pulser were added
add_pulser=self.par['draw_pul']
# no histo fitting at this time
fit_histos = False
# time slice the data
dt = self.par['time_slice_width']*us # step width
# good slices
slice_t, slices = slice_array(tg, dt)
# all slices
slice_t_a, slices_a = slice_array(tp, dt)
self.slice_t = slice_t
self.slices = slices
self.slice_t_a = slice_t_a
self.slices_a = slices_a
# histogram
h = []
hp = []
h_sum = B.histo( np.array([]), range = h_range, bins = h_bins)
hp_sum = B.histo( np.array([]), range = h_range, bins = h_bins)
for i,s in enumerate(slices):
hi = B.histo( Ag[s], range = h_range, bins = h_bins)
h_time = "{0:6.4f} s".format( slice_t[i]/us )
hi.title = h_time
h.append( hi )
h_sum += hi
for i,s in enumerate(slices_a):
hip = B.histo( Ap[s], range = h_range, bins = h_bins)
h_time = "{0:6.4f} s".format( slice_t_a[i]/us )
hip.title = h_time
hp.append( hip )
hp_sum += hip
# store created histograms
self.h=h
self.hp=hp
self.h_tot = h_sum
self.hp_tot = hp_sum
print("created ", len(h), " histograms h")
# calculate rates for protons and tritons
# proton counts
A_sp = []
dA_sp= []
# triton counts
A_st = []
dA_st= []
# pulser counts
A_pul = []
dA_pul = []
# for protons
p_min = self.par['p_min']#cdata.par.get_value('p_min')
p_max = self.par['p_max']#cdata.par.get_value('p_max')
# for tritons
t_min = self.par['t_min']
t_max = self.par['t_max']
# for pulser if selected
if add_pulser:
pul_min = self.par['pulser_min']
pul_max = self.par['pulser_max']
for i, hi in enumerate(h):
# proton fit
# fitting with limits
if fit_histos:
pass
# hi.fit(xmin = p_min, xmax = p_max)
# sum histograms
# intgerate proton peak
sp, dsp = hi.sum(xmin = p_min , xmax = p_max)
# integrate triton peaj
st, dst = hi.sum(xmin = t_min , xmax = t_max)
# store results
A_sp.append(sp)
dA_sp.append(dsp)
A_st.append(st)
dA_st.append(dst)
# integrate pulser
if add_pulser:
spul, dspul = hi.sum(xmin = pul_min , xmax = pul_max)
A_pul.append(spul)
dA_pul.append(dspul)
# proton amplitudes
self.A_sp = np.array(A_sp)
self.dA_sp = np.array(dA_sp)
# tritomn amplitudes
self.A_st = np.array(A_st)
self.dA_st = np.array(dA_st)
# pulser amplitudes
if add_pulser:
self.A_pul = np.array(A_pul)
self.dA_pul = np.array(dA_pul)
# total
self.A_t = self.A_sp + self.A_st
self.dA_t = np.sqrt(self.dA_sp**2 + self.dA_st**2)
# fitting results
if fit_histos:
pass
def plot_results(self):
draw_p = self.par['draw_p']
draw_t = self.par['draw_t']
draw_sum = self.par['draw_sum']
# histogram setup
h_min = self.par['h_min']
h_max = self.par['h_max']
h_bins = self.par['h_bins']
h_range = (h_min, h_max)
#if pulser were added
add_pulser = self.par['add_pulser']
# no histo fitting at this time
fit_histos = False
t_offset = self.par['t_offset'] #cdata.par.get_value('t_offset')*us
# get directories
f_name = self.var['f_name']
# load data (faster loading then from txt)
d = np.load(f_name)
tr = d['t'] + t_offset
Vpr = d['V'] # raw PH
Ar = d['A'] # fitted PH
dAr = d['sig_A']
# chir = np.zeros_like(tr)
# positive signals
pa = Ar > 0.
r = np.abs(dAr[pa] / Ar[pa])
# cut on error ratio
r_cut_off = self.par['sig_ratio']
# this is for good events
gr = r < r_cut_off
# this is to study background
#gr = r > r_cut_off
tg = tr[pa][gr]
A = Ar[pa][gr]
# dA = dAr[pa][gr]
# chi = chir[pa][gr]
# simple pulse heights for testing
ta = tr[pa]
Ap = Vpr[pa] # raw data
# time slice the data
dt = self.par['time_slice_width'] * us # step width
# bin numbers
i_t = (tg / dt).astype('int')
i_t_a = (ta / dt).astype('int')
# time slicing for fitted peaks
slice_t = []
slices = []
i_start = 0
i_bin = i_t[0]
for i, ip in enumerate(i_t):
if ip != i_bin or i == len(i_t) - 1:
i_end = i
# print "found slice from : ", i_start, i_end
slice_t.append(i_bin * dt + 0.5 * dt)
slices.append(slice(i_start, i_end))
i_bin = ip
i_start = i
# time slicing for all peaks
slice_t_a = []
slices_a = []
i_start_a = 0
i_bin_a = 0
for i, ip in enumerate(i_t_a):
if ip == i_bin_a:
continue
else:
i_end = i
# print "found slice from : ", i_start, i_end
slice_t_a.append(i_bin_a * dt + 0.5 * dt)
slices_a.append(slice(i_start_a, i_end))
i_bin_a = ip
i_start_a = i
# histogram
h = []
hp = []
for i, s in enumerate(slices):
hi = B.histo(A[s], range=h_range, bins=h_bins)
h_time = "{0:6.4f} s".format(slice_t[i] / us)
hi.title = h_time
h.append(hi)
for i, s in enumerate(slices_a):
hip = B.histo(Ap[s], range=h_range, bins=h_bins)
h_time = "{0:6.4f} s".format(slice_t_a[i] / us)
hip.title = h_time
hp.append(hip)
self.h = h
self.hp = hp
print("created ", len(h), " histograms h")
A_sp = []
dA_sp = []
A_st = []
dA_st = []
A_pul = []
dA_pul = []
# for protons
p_min = self.par['p_min'] #cdata.par.get_value('p_min')
p_max = self.par['p_max'] #cdata.par.get_value('p_max')
# for tritons
t_min = self.par['t_min']
t_max = self.par['t_max']
# fit histograms
if add_pulser:
pul_min = self.par['pulser_min']
pul_max = self.par['pulser_max']
# inital parameters
A_init = self.par['A_init']
sigma_init = self.par['sig_init']
for i, hi in enumerate(h):
# proton fit
# hi.mean.set(p_mean) #check if necessary
hi.A.set(A_init)
hi.sigma.set(sigma_init)
# fitting with limits
if fit_histos:
hi.fit(xmin=p_min, xmax=p_max)
# sum histograms
sp, dsp = hi.sum(xmin=p_min, xmax=p_max)
st, dst = hi.sum(xmin=t_min, xmax=t_max)
spul, dspul = hi.sum(xmin=pul_min, xmax=pul_max)
A_sp.append(sp)
dA_sp.append(dsp)
A_st.append(st)
dA_st.append(dst)
A_pul.append(spul)
dA_pul.append(dspul)
# proton amplitudes
A_sp = np.array(A_sp)
dA_sp = np.array(dA_sp)
# tritomn amplitudes
A_st = np.array(A_st)
dA_st = np.array(dA_st)
# pulser amplitudes
A_pul = np.array(A_pul)
dA_pul = np.array(dA_pul)
# total
A_t = A_sp + A_st
dA_t = np.sqrt(dA_sp**2 + dA_st**2)
# fitting results
if fit_histos:
A_f = []
dA_f = []
chi_red = []
m_f = []
dm_f = []
fact = np.sqrt(2. * np.pi)
for i, hi in enumerate(h):
bw = hi.bin_width
sig = np.abs(hi.sigma())
name, Am, dAm = hi.fit_par['A'].get()
name, p, dp = hi.fit_par['mean'].get()
A_f.append(Am * sig * fact / bw)
dA_f.append(dAm * sig * fact / bw)
m_f.append(p)
dm_f.append(dp)
chi_red.append(hi.F.chi2_red)
A_f = np.array(A_f)
dA_f = np.array(dA_f)
m_f = np.array(m_f)
dm_f = np.array(dm_f)
chi_red = np.array(chi_red)
# proton sum signal
if draw_p == 'True':
B.plot_exp(np.array(slice_t) / us,
A_sp / dt * us,
dA_sp / dt * us,
linestyle='-',
marker='o',
color='b',
ecolor='grey',
capsize=0.) #,markeredgecolor='g',
# triton sum signal
if draw_t == 'True':
B.plot_exp(np.array(slice_t) / us,
A_st / dt * us,
dA_st / dt * us,
color='g',
ecolor='grey',
capsize=0.)
# pulser sum signal
if add_pulser == 'True':
B.plot_exp(np.array(slice_t) / us,
A_pul / dt * us,
dA_pul / dt * us,
color='m',
ecolor='grey',
capsize=0.)
# Total signal
if draw_sum == 'True':
B.plot_exp(np.array(slice_t) / us,
A_t / dt * us,
dA_t / dt * us,
linestyle='-',
ecolor='grey',
marker='.',
capsize=0.,
label='Ch %d' %
self.par['channel']) #color = 'r',ecolor='grey', #
o_file = self.var['of_name']
if not os.path.exists(os.path.dirname(o_file)):
os.makedirs(os.path.dirname(o_file))
B.pl.xlabel('t [s]')
B.pl.ylabel('Rate [Hz]')
B.pl.title('Shot : ' + str(self.par['shot']) + '/ channel: ' +
str(self.par['channel']))
B.pl.xlim((self.par['dtmin'] / us, self.par['dtmax'] / us))
B.pl.show()
B.pl.savefig('../Analysis_Results/%d/Rate_Plotting/Rate_%s.png' %
(self.par['shot'], self.var['f_name'][-16:-6]))
# write results
# if os.path.isfile(o_file):
# inp = raw_input("Do you want to overwrite the results file? (y)es or (n)o: ")
# if inp == "yes" or inp == "y":
# os.remove(o_file)
# print 'Old file removed.'
# elif inp == "no" or inp == "n":
# return
np.savez_compressed(o_file,
t=np.asarray(slice_t) / us,
Ap=np.asarray(A_sp) / dt * us,
dAp=np.asarray(dA_sp) / dt * us,
At=np.asarray(A_st) / dt * us,
dAt=np.asarray(dA_st) / dt * us,
A=np.asarray(A_t) / dt * us,
dA=np.asarray(dA_t) / dt * us)
qb_sel = qb[sel]
qs_sel = qs[sel]
qeta = np.load(
'/Users/rupeshdotel/analysis/work/pi0pippimeta/data/qfactor_data/qvalues_gluexI.npz'
)
qse = qeta['qse']
#%%
#1d histos
#for etaprime mass
hb_ep = B.histo(metap[sel],
range=(0.86, 1.06),
bins=xbin,
weights=qb_sel,
title="bkg $\eta'$",
xlabel="$M(\pi^{+}\pi^{-}\eta)$")
hs_ep = B.histo(metap[sel],
range=(0.86, 1.06),
bins=xbin,
weights=qs_sel * qse,
title="signal $\eta'$",
xlabel="$M(\pi^{+}\pi^{-}\eta)$")
ht_ep = B.histo(metap[sel],
range=(0.86, 1.06),
bins=xbin,
title='Non-weighted',
xlabel="$M(\pi^{+}\pi^{-}\eta)$")
# for pi0mass
import numpy as np
import LT.box as B
#%%
#d = np.load('/Users/rupeshdotel/analysis/work/pi0pippimeta/data/qfactor_data/unique_cons_17_18_pol_0.npz')
d = np.load('/Users/rupeshdotel/analysis/work/pi0pippimeta/data/qfactor_data/gluex_unique_cons_17_18_incamo.npz')
#%%
metap = d['metap']
metappi0 = d['metappi0']
cost_etap = d['cost_etap']
h_etap = B.histo(metap, bins = 32, title = "$M(\pi^{+}\pi^{-}\eta)$ Kinfit Variables (Mass constrained trees)")
h_etappi0 = B.histo(metappi0, bins = 40,
title = "$M(\eta^{'}\pi^{0})$ Kinfit Variables (Mass constrianed trees) ")
h2_ep_cost = B.histo2d(metappi0, cost_etap, bins = ( 25, 25 ),
title = "Angular distribution in GJ Frame",
xlabel = "$M(\eta^{'}\pi^{0})$", ylabel = "$\cos\\theta_{GJ}$" )
#%%
#read the ASCII data file
par = B.LT.parameterfile.pfile('/Users/rupeshdotel/analysis/work/gluexgit/data_files/data/sideband.data')
# load the parameters values
# S0 are the sigma values from the fit
S0 = np.ones_like(M_inv_sel[:])
do_plot = False
q_err = np.ones_like(M_inv_sel[:])
#%%
for i, M_inv_loc in enumerate(M_inv_sel[2561:2563]):
# select neghboring events for the current event combine distance of costheta and phi normalized by pythagorian theorem
i_near = np.argsort(
np.sqrt((dcos_theta_etap_gj_m[i]**2 + dphi_etap_gj_m[i]**2)))[:n_near]
M_inv_neighbor = M_inv_sel[i_near]
h = B.histo(M_inv_neighbor, bins=15)
h_sel = h.bin_content > 0
M = h.bin_center[h_sel]
C = h.bin_content[h_sel]
dC = h.bin_error[h_sel]
A = B.Parameter(C.max(), 'A')
x0 = B.Parameter(0.956, 'x0')
sigma = B.Parameter(.005, 'sigma')
a0 = B.Parameter(1., 'a0')
a1 = B.Parameter(1., 'a1')
fit = B.genfit(signal, [A, x0, sigma, a0, a1],
x=M,
y=C,
y_err=dC,
combo_num = d['combo_number_unique']
dt = d['dt_unique']
event_num = d['event_num_unique']
kinfit_CL = d['kinfit_CL_unique']
chisq_ndf = d['chisq_ndf_unique']
#%%
q = np.load('/Users/rupeshdotel/analysis/work/pi0pippimeta/data/qfactor_data/qvalues_gluexI.npz')
qs_sel = q['qs_sel']; qb_sel = q['qb_sel'];
sel=q['sel'];
#%%
he_ws2d = B.histo(meta[sel], bins = 40, weights = qs_sel, title = '$\eta$' , xlabel = 'M($\gamma\gamma$)')
he = B.histo(meta[sel], bins = 40)
he_ws2d.plot_exp()
he_ws2d.show_fit_list()
he_ws2d.set_fit_list(['A', 'mean', 'sigma', 'b0', 'b1'])
he_ws2d.fit()
he_ws2d.plot_fit()
he_ws2d.title = '$\eta$'
he_ws2d.x_lable = '$M(\gamma\gamma)$'
b0 = he_ws2d.b0.value
b1 = he_ws2d.b1.value
#b2 = hs.b2.value
def eta_bkg(x):
return b0 + b1*x
