def simulateCallback(frame):
motionModel.update(motion[frame])
global g_initFlag
global forceShowTime
global JsysPre
global JsupPreL
global JsupPreR
global JsupPre
global JconstPre
global preFootCenter
global maxContactChangeCount
global contactChangeCount
global contact
global contactChangeType
# Kt, Kl, Kh, Bl, Bh, kt_sup = viewer.GetParam()
Kt, Kl, Kh, Bl, Bh, kt_sup = getParamVals(
['Kt', 'Kl', 'Kh', 'Bl', 'Bh', 'SupKt'])
Dt = 2 * (Kt**.5)
Dl = 2 * (Kl**.5)
Dh = 2 * (Kh**.5)
dt_sup = 2 * (kt_sup**.5)
doubleTosingleOffset = 0.15
singleTodoubleOffset = 0.30
# doubleTosingleOffset = 0.09
doubleTosingleVelOffset = 0.0
# tracking
th_r = motion.getDOFPositions(frame)
th = controlModel.getDOFPositions()
dth_r = motion.getDOFVelocities(frame)
dth = controlModel.getDOFVelocities()
ddth_r = motion.getDOFAccelerations(frame)
ddth_des = yct.getDesiredDOFAccelerations(th_r, th, dth_r, dth, ddth_r,
Kt, Dt)
ype.flatten(ddth_des, ddth_des_flat)
ype.flatten(dth, dth_flat)
#################################################
# jacobian
#################################################
# caution!! body orientation and joint orientation of foot are totally different!!
footOriL = controlModel.getJointOrientationGlobal(supL)
footOriR = controlModel.getJointOrientationGlobal(supR)
# desire footCenter[1] = 0.041135
# desire footCenter[1] = 0.0197
footCenterL = controlModel.getBodyPositionGlobal(supL)
footCenterR = controlModel.getBodyPositionGlobal(supR)
footBodyOriL = controlModel.getBodyOrientationGlobal(supL)
footBodyOriR = controlModel.getBodyOrientationGlobal(supR)
footBodyVelL = controlModel.getBodyVelocityGlobal(supL)
footBodyVelR = controlModel.getBodyVelocityGlobal(supR)
footBodyAngVelL = controlModel.getBodyAngVelocityGlobal(supL)
footBodyAngVelR = controlModel.getBodyAngVelocityGlobal(supR)
refFootL = motionModel.getBodyPositionGlobal(supL)
refFootR = motionModel.getBodyPositionGlobal(supR)
refFootVelL = motionModel.getBodyVelocityGlobal(supL)
refFootVelR = motionModel.getBodyVelocityGlobal(supR)
refFootAngVelL = motionModel.getBodyAngVelocityGlobal(supL)
refFootAngVelR = motionModel.getBodyAngVelocityGlobal(supR)
refFootJointVelR = motion.getJointVelocityGlobal(supR, frame)
refFootJointAngVelR = motion.getJointAngVelocityGlobal(supR, frame)
refFootJointR = motion.getJointPositionGlobal(supR, frame)
refFootVelR = refFootJointVelR + np.cross(refFootJointAngVelR,
(refFootR - refFootJointR))
refFootJointVelL = motion.getJointVelocityGlobal(supL, frame)
refFootJointAngVelL = motion.getJointAngVelocityGlobal(supL, frame)
refFootJointL = motion.getJointPositionGlobal(supL, frame)
refFootVelL = refFootJointVelL + np.cross(refFootJointAngVelL,
(refFootL - refFootJointL))
contactR = 1
contactL = 1
if refFootVelR[1] < 0 and refFootVelR[1] / 30. + refFootR[
1] > singleTodoubleOffset:
contactR = 0
if refFootVelL[1] < 0 and refFootVelL[1] / 30. + refFootL[
1] > singleTodoubleOffset:
contactL = 0
if refFootVelR[1] > 0 and refFootVelR[1] / 30. + refFootR[
1] > doubleTosingleOffset:
contactR = 0
if refFootVelL[1] > 0 and refFootVelL[1] / 30. + refFootL[
1] > doubleTosingleOffset:
contactL = 0
# if 32 < frame < 147:
# contactR = 0
contMotionOffset = th[0][0] - th_r[0][0]
linkPositions = controlModel.getBodyPositionsGlobal()
linkVelocities = controlModel.getBodyVelocitiesGlobal()
linkAngVelocities = controlModel.getBodyAngVelocitiesGlobal()
linkInertias = controlModel.getBodyInertiasGlobal()
jointPositions = controlModel.getJointPositionsGlobal()
jointAxeses = controlModel.getDOFAxeses()
CM = yrp.getCM(linkPositions, linkMasses, totalMass)
dCM = yrp.getCM(linkVelocities, linkMasses, totalMass)
CM_plane = copy.copy(CM)
CM_plane[1] = 0.
dCM_plane = copy.copy(dCM)
dCM_plane[1] = 0.
P = ymt.getPureInertiaMatrix(TO, linkMasses, linkPositions, CM,
linkInertias)
dP = ymt.getPureInertiaMatrixDerivative(dTO, linkMasses,
linkVelocities, dCM,
linkAngVelocities,
linkInertias)
# calculate jacobian
Jsys, dJsys = controlModel.computeCom_J_dJdq()
JsupL = Jsys[6 * supL:6 * supL + 6, :]
dJsupL = dJsys[6 * supL:6 * supL + 6]
JsupR = Jsys[6 * supR:6 * supR + 6, :]
dJsupR = dJsys[6 * supR:6 * supR + 6]
# calculate contact state
# if g_initFlag == 1 and contact == 1 and refFootR[1] < doubleTosingleOffset and footCenterR[1] < 0.08:
if g_initFlag == 1:
# contact state
# 0: flying 1: right only 2: left only 3: double
# if contact == 2 and refFootR[1] < doubleTosingleOffset:
if contact == 2 and contactR == 1:
contact = 3
maxContactChangeCount += 30
contactChangeCount += maxContactChangeCount
contactChangeType = 'StoD'
# elif contact == 3 and refFootL[1] < doubleTosingleOffset:
elif contact == 1 and contactL == 1:
contact = 3
maxContactChangeCount += 30
contactChangeCount += maxContactChangeCount
contactChangeType = 'StoD'
# elif contact == 3 and refFootR[1] > doubleTosingleOffset:
elif contact == 3 and contactR == 0:
contact = 2
contactChangeCount += maxContactChangeCount
contactChangeType = 'DtoS'
# elif contact == 3 and refFootL[1] > doubleTosingleOffset:
elif contact == 3 and contactL == 0:
contact = 1
contactChangeCount += maxContactChangeCount
contactChangeType = 'DtoS'
else:
contact = 0
# if refFootR[1] < doubleTosingleOffset:
if contactR == 1:
contact += 1
# if refFootL[1] < doubleTosingleOffset:
if contactL == 1:
contact += 2
# initialization
if g_initFlag == 0:
JsysPre = Jsys.copy()
JsupPreL = JsupL.copy()
JsupPreR = JsupR.copy()
JconstPre = Jconst.copy()
softConstPoint = footCenterR.copy()
# yjc.computeJacobian2(JsysPre, DOFs, jointPositions, jointAxeses, linkPositions, allLinkJointMasks)
# yjc.computeJacobian2(JsupPreL, DOFs, jointPositions, jointAxeses, [footCenterL], supLJointMasks)
# yjc.computeJacobian2(JsupPreR, DOFs, jointPositions, jointAxeses, [footCenterR], supRJointMasks)
# yjc.computeJacobian2(JconstPre, DOFs, jointPositions, jointAxeses, [softConstPoint], constJointMasks)
footCenter = footCenterL + (footCenterR - footCenterL) / 2.0
footCenter[1] = 0.
preFootCenter = footCenter.copy()
# footToBodyFootRotL = np.dot(np.transpose(footOriL), footBodyOriL)
# footToBodyFootRotR = np.dot(np.transpose(footOriR), footBodyOriR)
if refFootR[1] < doubleTosingleOffset:
contact += 1
if refFootL[1] < doubleTosingleOffset:
contact += 2
g_initFlag = 1
# calculate footCenter
footCenter = footCenterL + (footCenterR - footCenterL) / 2.0
# if refFootR[1] >doubleTosingleOffset:
# if refFootR[1] > doubleTosingleOffset or footCenterR[1] > 0.08:
# if contact == 1 or footCenterR[1] > 0.08:
# if contact == 2 or footCenterR[1] > doubleTosingleOffset/2:
if contact == 2:
footCenter = footCenterL.copy()
# elif contact == 1 or footCenterL[1] > doubleTosingleOffset/2:
if contact == 1:
footCenter = footCenterR.copy()
footCenter[1] = 0.
if contactChangeCount > 0 and contactChangeType == 'StoD':
# change footcenter gradually
footCenter = preFootCenter + (
maxContactChangeCount - contactChangeCount) * (
footCenter - preFootCenter) / maxContactChangeCount
preFootCenter = footCenter.copy()
# linear momentum
# TODO:
# We should consider dCM_ref, shouldn't we?
# add getBodyPositionGlobal and getBodyPositionsGlobal in csVpModel!
# todo that, set joint velocities to vpModel
CM_ref_plane = footCenter
dL_des_plane = Kl * totalMass * (CM_ref_plane -
CM_plane) - Dl * totalMass * dCM_plane
# dL_des_plane[1] = 0.
# angular momentum
CP_ref = footCenter
bodyIDs, contactPositions, contactPositionLocals, contactForces = vpWorld.calcPenaltyForce(
bodyIDsToCheck, mus, Ks, Ds)
# bodyIDs, contactPositions, contactPositionLocals, contactForces, contactVelocities = vpWorld.calcManyPenaltyForce(0, bodyIDsToCheck, mus, Ks, Ds)
CP = yrp.getCP(contactPositions, contactForces)
if CP_old[0] is None or CP is None:
dCP = None
else:
dCP = (CP - CP_old[0]) / (1 / 30.)
CP_old[0] = CP
if CP is not None and dCP is not None:
ddCP_des = Kh * (CP_ref - CP) - Dh * (dCP)
CP_des = CP + dCP * (1 / 30.) + .5 * ddCP_des * ((1 / 30.)**2)
dH_des = np.cross(
(CP_des - CM),
(dL_des_plane + totalMass * mm.s2v(wcfg.gravity)))
if contactChangeCount > 0: # and contactChangeType == 'DtoS':
# dH_des *= (maxContactChangeCount - contactChangeCount)/(maxContactChangeCount*10)
dH_des *= (maxContactChangeCount -
contactChangeCount) / (maxContactChangeCount)
# dH_des *= (contactChangeCount)/(maxContactChangeCount)*.9+.1
else:
dH_des = None
# H = np.dot(P, np.dot(Jsys, dth_flat))
# dH_des = -Kh* H[3:]
# soft point constraint
#softConstPoint = refFootR.copy()
##softConstPoint[0] += 0.2
#Ksc = 50
#Dsc = 2*(Ksc**.5)
#Bsc = 1.
#P_des = softConstPoint
#P_cur = controlModel.getBodyPositionGlobal(constBody)
#dP_des = [0, 0, 0]
#dP_cur = controlModel.getBodyVelocityGlobal(constBody)
#ddP_des1 = Ksc*(P_des - P_cur) + Dsc*(dP_des - dP_cur)
#r = P_des - P_cur
#I = np.vstack(([1,0,0],[0,1,0],[0,0,1]))
#Z = np.hstack((I, mm.getCrossMatrixForm(-r)))
#yjc.computeJacobian2(Jconst, DOFs, jointPositions, jointAxeses, [softConstPoint], constJointMasks)
#dJconst = (Jconst - Jconst)/(1/30.)
#JconstPre = Jconst.copy()
##yjc.computeJacobianDerivative2(dJconst, DOFs, jointPositions, jointAxeses, linkAngVelocities, [softConstPoint], constJointMasks, False)
#JL, JA = np.vsplit(Jconst, 2)
#Q1 = np.dot(Z, Jconst)
#q1 = np.dot(JA, dth_flat)
#q2 = np.dot(mm.getCrossMatrixForm(q1), np.dot(mm.getCrossMatrixForm(q1), r))
#q_bias1 = np.dot(np.dot(Z, dJconst), dth_flat) + q2
#set up equality constraint
a_oriL = mm.logSO3(
mm.getSO3FromVectors(np.dot(footBodyOriL, np.array([0, 1, 0])),
np.array([0, 1, 0])))
a_oriR = mm.logSO3(
mm.getSO3FromVectors(np.dot(footBodyOriR, np.array([0, 1, 0])),
np.array([0, 1, 0])))
#if contact == 3 and contactChangeCount < maxContactChangeCount/4 and contactChangeCount >=1:
#kt_sup = 30
#viewer.objectInfoWnd.labelSupKt.value(kt_sup)
#viewer.objectInfoWnd.sliderSupKt.value(initSupKt*10)
# a_supL = np.append(kt_sup*(refFootL - footCenterL + contMotionOffset) + dt_sup*(refFootVelL - footBodyVelL), kt_sup*a_oriL+dt_sup*(refFootAngVelL-footBodyAngVelL))
# a_supR = np.append(kt_sup*(refFootR - footCenterR + contMotionOffset) + dt_sup*(refFootVelR - footBodyVelR), kt_sup*a_oriR+dt_sup*(refFootAngVelR-footBodyAngVelR))
a_supL = np.append(
kt_sup * (refFootL - footCenterL + contMotionOffset) -
dt_sup * footBodyVelL, kt_sup * a_oriL - dt_sup * footBodyAngVelL)
a_supR = np.append(
kt_sup * (refFootR - footCenterR + contMotionOffset) -
dt_sup * footBodyVelR, kt_sup * a_oriR - dt_sup * footBodyAngVelR)
if contactChangeCount > 0 and contactChangeType == 'DtoS':
#refFootR += (footCenter-CM_plane)/2.
#refFootR[1] = 0
#pre contact value are needed
#if contact == 2:
##refFootR[0] += 0.2
##refFootR[2] -= 0.05
#offsetDropR = (footCenter-CM_plane)/2.
#refFootR += offsetDropR
#refFootR[1] = 0.
##refFootR[2] = footCenterR[2] - contMotionOffset[2]
##refFootR[0] = footCenterR[0] - contMotionOffset[0]
#refFootL[0] += 0.05
#refFootL[2] -= 0.05
#elif contact == 1:
#offsetDropL = (footCenter-CM_plane)/2.
#refFootL += offsetDropL
#refFootL[1] = 0.
#a_supL = np.append(kt_sup*(refFootL - footCenterL + contMotionOffset) + dt_sup*(refFootVelL - footBodyVelL), kt_sup*a_oriL+dt_sup*(refFootAngVelL-footBodyAngVelL))
#a_supR = np.append(kt_sup*(refFootR - footCenterR + contMotionOffset) + dt_sup*(refFootVelR - footBodyVelR), kt_sup*a_oriR+dt_sup*(refFootAngVelR-footBodyAngVelR))
#a_supL = np.append(kt_sup*(refFootL - footCenterL + contMotionOffset) + dt_sup*(refFootVelL - footBodyVelL), 16*kt_sup*a_oriL+4*dt_sup*(refFootAngVelL-footBodyAngVelL))
#a_supR = np.append(kt_sup*(refFootR - footCenterR + contMotionOffset) + dt_sup*(refFootVelR - footBodyVelR), 16*kt_sup*a_oriR+4*dt_sup*(refFootAngVelR-footBodyAngVelR))
a_supL = np.append(
kt_sup * (refFootL - footCenterL + contMotionOffset) + dt_sup *
(refFootVelL - footBodyVelL), 4 * kt_sup * a_oriL +
2 * dt_sup * (refFootAngVelL - footBodyAngVelL))
a_supR = np.append(
kt_sup * (refFootR - footCenterR + contMotionOffset) + dt_sup *
(refFootVelR - footBodyVelR), 4 * kt_sup * a_oriR +
2 * dt_sup * (refFootAngVelR - footBodyAngVelR))
elif contactChangeCount > 0 and contactChangeType == 'StoD':
#refFootR[0] +=0.05
#refFootR[2] +=0.05
linkt = (13. * contactChangeCount) / (maxContactChangeCount) + 1.
lindt = 2 * (linkt**.5)
angkt = (13. * contactChangeCount) / (maxContactChangeCount) + 1.
angdt = 2 * (angkt**.5)
#a_supL = np.append(4*kt_sup*(refFootL - footCenterL + contMotionOffset) + 2*dt_sup*(refFootVelL - footBodyVelL), 16*kt_sup*a_oriL+4*dt_sup*(refFootAngVelL-footBodyAngVelL))
#a_supR = np.append(4*kt_sup*(refFootR - footCenterR + contMotionOffset) + 2*dt_sup*(refFootVelR - footBodyVelR), 16*kt_sup*a_oriR+4*dt_sup*(refFootAngVelR-footBodyAngVelR))
a_supL = np.append(
linkt * kt_sup * (refFootL - footCenterL + contMotionOffset) +
lindt * dt_sup * (refFootVelL - footBodyVelL),
angkt * kt_sup * a_oriL + angdt * dt_sup *
(refFootAngVelL - footBodyAngVelL))
a_supR = np.append(
linkt * kt_sup * (refFootR - footCenterR + contMotionOffset) +
lindt * dt_sup * (refFootVelR - footBodyVelR),
angkt * kt_sup * a_oriR + angdt * dt_sup *
(refFootAngVelR - footBodyAngVelR))
#a_supL = np.append(16*kt_sup*(refFootL - footCenterL + contMotionOffset) + 4*dt_sup*(refFootVelL - footBodyVelL), 16*kt_sup*a_oriL+4*dt_sup*(refFootAngVelL-footBodyAngVelL))
#a_supR = np.append(16*kt_sup*(refFootR - footCenterR + contMotionOffset) + 4*dt_sup*(refFootVelR - footBodyVelR), 16*kt_sup*a_oriR+4*dt_sup*(refFootAngVelR-footBodyAngVelR))
#a_supL = np.append(4*kt_sup*(refFootL - footCenterL + contMotionOffset) + 2*dt_sup*(refFootVelL - footBodyVelL), 32*kt_sup*a_oriL+5.6*dt_sup*(refFootAngVelL-footBodyAngVelL))
#a_supR = np.append(4*kt_sup*(refFootR - footCenterR + contMotionOffset) + 2*dt_sup*(refFootVelR - footBodyVelR), 32*kt_sup*a_oriR+5.6*dt_sup*(refFootAngVelR-footBodyAngVelR))
#a_supL[1] = kt_sup*(refFootL[1] - footCenterL[1] + contMotionOffset[1]) + dt_sup*(refFootVelL[1] - footBodyVelL[1])
#a_supR[1] = kt_sup*(refFootR[1] - footCenterR[1] + contMotionOffset[1]) + dt_sup*(refFootVelR[1] - footBodyVelR[1])
##if contact == 2:
#if refFootR[1] <doubleTosingleOffset :
#Jsup = np.vstack((JsupL, JsupR))
#dJsup = np.vstack((dJsupL, dJsupR))
#a_sup = np.append(a_supL, a_supR)
#else:
#Jsup = JsupL.copy()
#dJsup = dJsupL.copy()
#a_sup = a_supL.copy()
# momentum matrix
RS = np.dot(P, Jsys)
R, S = np.vsplit(RS, 2)
# rs = np.dot((np.dot(dP, Jsys) + np.dot(P, dJsys)), dth_flat)
rs = np.dot(dP, np.dot(Jsys, dth_flat)) + np.dot(P, dJsys)
r_bias, s_bias = np.hsplit(rs, 2)
#######################################################
# optimization
#######################################################
#if contact == 2 and footCenterR[1] > doubleTosingleOffset/2:
if contact == 2:
config['weightMap']['RightUpLeg'] = .8
config['weightMap']['RightLeg'] = .8
config['weightMap']['RightFoot'] = .8
else:
config['weightMap']['RightUpLeg'] = .1
config['weightMap']['RightLeg'] = .25
config['weightMap']['RightFoot'] = .2
#if contact == 1 and footCenterL[1] > doubleTosingleOffset/2:
if contact == 1:
config['weightMap']['LeftUpLeg'] = .8
config['weightMap']['LeftLeg'] = .8
config['weightMap']['LeftFoot'] = .8
else:
config['weightMap']['LeftUpLeg'] = .1
config['weightMap']['LeftLeg'] = .25
config['weightMap']['LeftFoot'] = .2
w = mot.getTrackingWeight(DOFs, motion[0].skeleton,
config['weightMap'])
#if contact == 2:
#mot.addSoftPointConstraintTerms(problem, totalDOF, Bsc, ddP_des1, Q1, q_bias1)
mot.addTrackingTerms(problem, totalDOF, Bt, w, ddth_des_flat)
if dH_des is not None:
mot.addLinearTerms(problem, totalDOF, Bl, dL_des_plane, R, r_bias)
mot.addAngularTerms(problem, totalDOF, Bh, dH_des, S, s_bias)
#if contact & 1 and contactChangeCount == 0:
if contact & 1:
#if refFootR[1] < doubleTosingleOffset:
mot.addConstraint2(problem, totalDOF, JsupR, dJsupR, dth_flat,
a_supR)
if contact & 2:
#if refFootL[1] < doubleTosingleOffset:
mot.addConstraint2(problem, totalDOF, JsupL, dJsupL, dth_flat,
a_supL)
if contactChangeCount > 0:
contactChangeCount -= 1
if contactChangeCount == 0:
maxContactChangeCount = 30
contactChangeType = 0
r = problem.solve()
problem.clear()
ype.nested(r['x'], ddth_sol)
rootPos[0] = controlModel.getBodyPositionGlobal(selectedBody)
localPos = [[0, 0, 0]]
for i in range(stepsPerFrame):
# apply penalty force
bodyIDs, contactPositions, contactPositionLocals, contactForces = vpWorld.calcPenaltyForce(
bodyIDsToCheck, mus, Ks, Ds)
# print(contactForces)
#bodyIDs, contactPositions, contactPositionLocals, contactForces, contactVelocities = vpWorld.calcManyPenaltyForce(0, bodyIDsToCheck, mus, Ks, Ds)
vpWorld.applyPenaltyForce(bodyIDs, contactPositionLocals,
contactForces)
controlModel.setDOFAccelerations(ddth_sol)
controlModel.solveHybridDynamics()
if forceShowTime > viewer.objectInfoWnd.labelForceDur.value():
forceShowTime = 0
viewer_ResetForceState()
forceforce = np.array([
viewer.objectInfoWnd.labelForceX.value(),
viewer.objectInfoWnd.labelForceY.value(),
viewer.objectInfoWnd.labelForceZ.value()
])
extraForce[0] = getParamVal('Fm') * mm.normalize2(forceforce)
# extraForce[0] = viewer.objectInfoWnd.labelFm.value() * mm.normalize2(forceforce)
if viewer_GetForceState():
forceShowTime += wcfg.timeStep
vpWorld.applyPenaltyForce(selectedBodyId, localPos, extraForce)
vpWorld.step()
# rendering
rightFootVectorX[0] = np.dot(footOriL, np.array([.1, 0, 0]))
rightFootVectorY[0] = np.dot(footOriL, np.array([0, .1, 0]))
rightFootVectorZ[0] = np.dot(footOriL, np.array([0, 0, .1]))
rightFootPos[0] = footCenterL
rightVectorX[0] = np.dot(footBodyOriL, np.array([.1, 0, 0]))
rightVectorY[0] = np.dot(footBodyOriL, np.array([0, .1, 0]))
rightVectorZ[0] = np.dot(footBodyOriL, np.array([0, 0, .1]))
rightPos[0] = footCenterL + np.array([.1, 0, 0])
rd_footCenter[0] = footCenter
rd_footCenterL[0] = footCenterL
rd_footCenterR[0] = footCenterR
rd_CM[0] = CM
rd_CM_plane[0] = CM.copy()
rd_CM_plane[0][1] = 0.
if CP is not None and dCP is not None:
rd_CP[0] = CP
rd_CP_des[0] = CP_des
rd_dL_des_plane[0] = [
dL_des_plane[0] / 100, dL_des_plane[1] / 100,
dL_des_plane[2] / 100
]
rd_dH_des[0] = dH_des
rd_grf_des[0] = dL_des_plane - totalMass * mm.s2v(wcfg.gravity)
rd_root_des[0] = rootPos[0]
del rd_CF[:]
del rd_CF_pos[:]
for i in range(len(contactPositions)):
rd_CF.append(contactForces[i] / 400)
rd_CF_pos.append(contactPositions[i].copy())
if viewer_GetForceState():
rd_exfen_des[0] = [
extraForce[0][0] / 100, extraForce[0][1] / 100,
extraForce[0][2] / 100
]
rd_exf_des[0] = [0, 0, 0]
else:
rd_exf_des[0] = [
extraForce[0][0] / 100, extraForce[0][1] / 100,
extraForce[0][2] / 100
]
rd_exfen_des[0] = [0, 0, 0]
extraForcePos[0] = controlModel.getBodyPositionGlobal(selectedBody)
def simulateCallback(frame):
# print(frame)
# print(motion[frame].getJointOrientationLocal(footIdDic['RightFoot_foot_0_1_0']))
if frame == start_frame:
viewer.force_on = True
if False:
if frame == start_frame:
setParamVal('Fm', 35)
viewer.force_on = True
if frame == start_frame + 150:
setParamVal('Fm', 40)
viewer.force_on = True
if frame == start_frame + 300:
setParamVal('Fm', 45)
viewer.force_on = True
if frame == start_frame + 450:
setParamVal('Fm', 50)
viewer.force_on = True
if frame == start_frame + 600:
setParamVal('Fm', 55)
viewer.force_on = True
if frame == start_frame + 750:
setParamVal('Fm', 60)
viewer.force_on = True
# hfi.footAdjust(motion[frame], idDic, SEGMENT_FOOT_MAG=.03, SEGMENT_FOOT_RAD=.015, baseHeight=0.02)
if abs(getParamVal('tiptoe angle')) > 0.001:
tiptoe_angle = getParamVal('tiptoe angle')
motion[frame].mulJointOrientationLocal(idDic['LeftFoot_foot_0_0_0'],
mm.exp(mm.unitX(), -math.pi * tiptoe_angle))
motion[frame].mulJointOrientationLocal(idDic['LeftFoot_foot_0_1_0'],
mm.exp(mm.unitX(), -math.pi * tiptoe_angle))
motion[frame].mulJointOrientationLocal(idDic['RightFoot_foot_0_0_0'],
mm.exp(mm.unitX(), -math.pi * tiptoe_angle))
motion[frame].mulJointOrientationLocal(idDic['RightFoot_foot_0_1_0'],
mm.exp(mm.unitX(), -math.pi * tiptoe_angle))
# motion[frame].mulJointOrientationLocal(idDic['LeftFoot'], mm.exp(mm.unitX(), math.pi * tiptoe_angle * 0.95))
# motion[frame].mulJointOrientationLocal(idDic['RightFoot'], mm.exp(mm.unitX(), math.pi * tiptoe_angle * 0.95))
motion[frame].mulJointOrientationLocal(idDic['LeftFoot'], mm.exp(mm.unitX(), math.pi * tiptoe_angle))
motion[frame].mulJointOrientationLocal(idDic['RightFoot'], mm.exp(mm.unitX(), math.pi * tiptoe_angle))
if getParamVal('left tilt angle') > 0.001:
left_tilt_angle = getParamVal('left tilt angle')
if motion[0].skeleton.getJointIndex('LeftFoot_foot_0_1') is not None:
motion[frame].mulJointOrientationLocal(idDic['LeftFoot_foot_0_1'], mm.exp(mm.unitZ(), -math.pi * left_tilt_angle))
else:
motion[frame].mulJointOrientationLocal(idDic['LeftFoot_foot_0_1_0'], mm.exp(mm.unitZ(), -math.pi * left_tilt_angle))
motion[frame].mulJointOrientationLocal(idDic['LeftFoot'], mm.exp(mm.unitZ(), math.pi * left_tilt_angle))
elif getParamVal('left tilt angle') < -0.001:
left_tilt_angle = getParamVal('left tilt angle')
motion[frame].mulJointOrientationLocal(idDic['LeftFoot_foot_0_0'], mm.exp(mm.unitZ(), -math.pi * left_tilt_angle))
if motion[0].skeleton.getJointIndex('LeftFoot_foot_0_1') is not None:
motion[frame].mulJointOrientationLocal(idDic['LeftFoot_foot_0_1'], mm.exp(mm.unitZ(), math.pi * left_tilt_angle))
else:
motion[frame].mulJointOrientationLocal(idDic['LeftFoot_foot_0_1_0'], mm.exp(mm.unitZ(), math.pi * left_tilt_angle))
motion[frame].mulJointOrientationLocal(idDic['LeftFoot'], mm.exp(mm.unitZ(), math.pi * left_tilt_angle))
if getParamVal('right tilt angle') > 0.001:
right_tilt_angle = getParamVal('right tilt angle')
if motion[0].skeleton.getJointIndex('RightFoot_foot_0_1') is not None:
motion[frame].mulJointOrientationLocal(idDic['RightFoot_foot_0_1'], mm.exp(mm.unitZ(), math.pi * right_tilt_angle))
else:
motion[frame].mulJointOrientationLocal(idDic['RightFoot_foot_0_1_0'], mm.exp(mm.unitZ(), math.pi * right_tilt_angle))
motion[frame].mulJointOrientationLocal(idDic['RightFoot'], mm.exp(mm.unitZ(), -math.pi * right_tilt_angle))
elif getParamVal('right tilt angle') < -0.001:
right_tilt_angle = getParamVal('right tilt angle')
motion[frame].mulJointOrientationLocal(idDic['RightFoot_foot_0_0'], mm.exp(mm.unitZ(), math.pi * right_tilt_angle))
if motion[0].skeleton.getJointIndex('RightFoot_foot_0_1') is not None:
motion[frame].mulJointOrientationLocal(idDic['RightFoot_foot_0_1'], mm.exp(mm.unitZ(), -math.pi * right_tilt_angle))
# else:
# motion[frame].mulJointOrientationLocal(idDic['RightFoot_foot_0_1_0'], mm.exp(mm.unitZ(), -math.pi * right_tilt_angle))
motion[frame].mulJointOrientationLocal(idDic['RightFoot'], mm.exp(mm.unitZ(), -math.pi * right_tilt_angle))
motionModel.update(motion[frame])
motionModel.translateByOffset(np.array([getParamVal('com X offset'), getParamVal('com Y offset'), getParamVal('com Z offset')]))
controlModel_ik.set_q(controlModel.get_q())
global g_initFlag
global forceShowTime
global JsysPre
global JsupPreL
global JsupPreR
global JconstPre
global preFootCenter
global maxContactChangeCount
global contactChangeCount
global contact
global contactChangeType
Kt, Kl, Kh, Bl, Bh, kt_sup = getParamVals(['Kt', 'Kl', 'Kh', 'Bl', 'Bh', 'SupKt'])
Dt = 2*(Kt**.5)
Dl = 2*(Kl**.5)
Dh = 2*(Kh**.5)
dt_sup = 2*(kt_sup**.5)
# tracking
th_r = motion.getDOFPositions(frame)
th = controlModel.getDOFPositions()
dth_r = motion.getDOFVelocities(frame)
dth = controlModel.getDOFVelocities()
ddth_r = motion.getDOFAccelerations(frame)
ddth_des = yct.getDesiredDOFAccelerations(th_r, th, dth_r, dth, ddth_r, Kt, Dt)
# ype.flatten(fix_dofs(DOFs, ddth_des, mcfg, joint_names), ddth_des_flat)
# ype.flatten(fix_dofs(DOFs, dth, mcfg, joint_names), dth_flat)
ype.flatten(ddth_des, ddth_des_flat)
ype.flatten(dth, dth_flat)
#################################################
# jacobian
#################################################
contact_des_ids = list() # desired contact segments
if foot_viewer.check_op_l.value():
contact_des_ids.append(motion[0].skeleton.getJointIndex('LeftToes'))
if foot_viewer.check_h_l.value():
contact_des_ids.append(motion[0].skeleton.getJointIndex('LeftFoot'))
if foot_viewer.check_op_r.value():
contact_des_ids.append(motion[0].skeleton.getJointIndex('RightToes'))
if foot_viewer.check_h_r.value():
contact_des_ids.append(motion[0].skeleton.getJointIndex('RightFoot'))
contact_ids = list() # temp idx for balancing
contact_ids.extend(contact_des_ids)
contact_joint_ori = list(map(controlModel.getJointOrientationGlobal, contact_ids))
contact_joint_pos = list(map(controlModel.getJointPositionGlobal, contact_ids))
contact_body_ori = list(map(controlModel.getBodyOrientationGlobal, contact_ids))
contact_body_pos = list(map(controlModel.getBodyPositionGlobal, contact_ids))
contact_body_vel = list(map(controlModel.getBodyVelocityGlobal, contact_ids))
contact_body_angvel = list(map(controlModel.getBodyAngVelocityGlobal, contact_ids))
ref_joint_ori = list(map(motion[frame].getJointOrientationGlobal, contact_ids))
ref_joint_pos = list(map(motion[frame].getJointPositionGlobal, contact_ids))
ref_joint_vel = [motion.getJointVelocityGlobal(joint_idx, frame) for joint_idx in contact_ids]
ref_joint_angvel = [motion.getJointAngVelocityGlobal(joint_idx, frame) for joint_idx in contact_ids]
ref_body_ori = list(map(motionModel.getBodyOrientationGlobal, contact_ids))
ref_body_pos = list(map(motionModel.getBodyPositionGlobal, contact_ids))
# ref_body_vel = list(map(controlModel.getBodyVelocityGlobal, contact_ids))
ref_body_angvel = [motion.getJointAngVelocityGlobal(joint_idx, frame) for joint_idx in contact_ids]
ref_body_vel = [ref_joint_vel[i] + np.cross(ref_joint_angvel[i], ref_body_pos[i] - ref_joint_pos[i])
for i in range(len(ref_joint_vel))]
is_contact = [1] * len(contact_ids)
contact_right = len(set(contact_des_ids).intersection(rIDlist)) > 0
contact_left = len(set(contact_des_ids).intersection(lIDlist)) > 0
contMotionOffset = th[0][0] - th_r[0][0]
linkPositions = controlModel.getBodyPositionsGlobal()
linkVelocities = controlModel.getBodyVelocitiesGlobal()
linkAngVelocities = controlModel.getBodyAngVelocitiesGlobal()
linkInertias = controlModel.getBodyInertiasGlobal()
CM = yrp.getCM(linkPositions, linkMasses, totalMass)
dCM = yrp.getCM(linkVelocities, linkMasses, totalMass)
CM_plane = copy.copy(CM)
CM_plane[1] = 0.
dCM_plane = copy.copy(dCM)
dCM_plane[1] = 0.
P = ymt.getPureInertiaMatrix(TO, linkMasses, linkPositions, CM, linkInertias)
dP = ymt.getPureInertiaMatrixDerivative(dTO, linkMasses, linkVelocities, dCM, linkAngVelocities, linkInertias)
# calculate jacobian
Jsys, dJsys = controlModel.computeCom_J_dJdq()
J_contacts = [] # type: list[np.ndarray]
dJ_contacts = [] # type: list[np.ndarray]
for contact_id in contact_ids:
J_contacts.append(Jsys[6*contact_id:6*contact_id + 6, :])
dJ_contacts.append(dJsys[6*contact_id:6*contact_id + 6])
# calculate footCenter
footCenter = sum(contact_body_pos) / len(contact_body_pos) if len(contact_body_pos) > 0 \
else .5 * (controlModel.getBodyPositionGlobal(supL) + controlModel.getBodyPositionGlobal(supR))
footCenter[1] = 0.
# if len(contact_body_pos) > 2:
# hull = ConvexHull(contact_body_pos)
footCenter_ref = sum(ref_body_pos) / len(ref_body_pos) if len(ref_body_pos) > 0 \
else .5 * (motionModel.getBodyPositionGlobal(supL) + motionModel.getBodyPositionGlobal(supR))
footCenter_ref = footCenter_ref + contMotionOffset
# if len(ref_body_pos) > 2:
# hull = ConvexHull(ref_body_pos)
footCenter_ref[1] = 0.
# footCenter[0] = footCenter[0] + getParamVal('com X offset')
# footCenter[1] = footCenter[0] + getParamVal('com Y offset')
# footCenter[2] = footCenter[2] + getParamVal('com Z offset')
# initialization
if g_initFlag == 0:
preFootCenter[0] = footCenter.copy()
g_initFlag = 1
# if contactChangeCount == 0 and np.linalg.norm(footCenter - preFootCenter[0]) > 0.01:
# contactChangeCount += 30
if contactChangeCount > 0:
# change footcenter gradually
footCenter = preFootCenter[0] + (maxContactChangeCount - contactChangeCount)*(footCenter-preFootCenter[0])/maxContactChangeCount
else:
preFootCenter[0] = footCenter.copy()
# linear momentum
# TODO:
# We should consider dCM_ref, shouldn't we?
# add getBodyPositionGlobal and getBodyPositionsGlobal in csVpModel!
# to do that, set joint velocities to vpModel
CM_ref_plane = footCenter
# CM_ref_plane = footCenter_ref
CM_ref = footCenter + np.array([getParamVal('com X offset'), motionModel.getCOM()[1] + getParamVal('com Y offset'), getParamVal('com Z offset')])
dL_des_plane = Kl * totalMass * (CM_ref - CM) - Dl * totalMass * dCM
# dL_des_plane = Kl * totalMass * (CM_ref_plane - CM_plane) - Dl * totalMass * dCM_plane
# dL_des_plane[1] = 0.
# print('dCM_plane : ', np.linalg.norm(dCM_plane))
# angular momentum
CP_ref = footCenter
# CP_ref = footCenter_ref
bodyIDs, contactPositions, contactPositionLocals, contactForces = vpWorld.calcPenaltyForce(bodyIDsToCheck, mus, Ks, Ds)
CP = yrp.getCP(contactPositions, contactForces)
if CP_old[0] is None or CP is None:
dCP = None
else:
dCP = (CP - CP_old[0])/(1/30.)
CP_old[0] = CP
if CP is not None and dCP is not None:
ddCP_des = Kh*(CP_ref - CP) - Dh * dCP
dCP_des = dCP + ddCP_des * (1/30.)
CP_des = CP + dCP_des * (1/30.)
# CP_des = footCenter
CP_des = CP + dCP*(1/30.) + .5*ddCP_des*((1/30.)**2)
dH_des = np.cross((CP_des - CM), (dL_des_plane + totalMass * mm.s2v(wcfg.gravity)))
if contactChangeCount > 0: # and contactChangeType == 'DtoS':
dH_des *= (maxContactChangeCount - contactChangeCount)/maxContactChangeCount
else:
dH_des = None
# convex hull
contact_pos_2d = np.asarray([np.array([contactPosition[0], contactPosition[2]]) for contactPosition in contactPositions])
p = np.array([CM_plane[0], CM_plane[2]])
# hull = None # type: Delaunay
# if contact_pos_2d.shape[0] > 0:
# hull = Delaunay(contact_pos_2d)
# print(hull.find_simplex(p) >= 0)
# set up equality constraint
# TODO:
# logSO3 is just q'', not acceleration.
# To make a_oris acceleration, q'' -> a will be needed
# body_ddqs = list(map(mm.logSO3, [mm.getSO3FromVectors(np.dot(body_ori, mm.unitY()), mm.unitY()) for body_ori in contact_body_ori]))
# body_ddqs = list(map(mm.logSO3, [np.dot(contact_body_ori[i].T, np.dot(ref_body_ori[i], mm.getSO3FromVectors(np.dot(ref_body_ori[i], mm.unitY()), mm.unitY()))) for i in range(len(contact_body_ori))]))
# body_ddqs = list(map(mm.logSO3, [np.dot(contact_body_ori[i].T, np.dot(ref_body_ori[i], mm.getSO3FromVectors(np.dot(ref_body_ori[i], up_vec_in_each_link[contact_ids[i]]), mm.unitY()))) for i in range(len(contact_body_ori))]))
a_oris = list(map(mm.logSO3, [np.dot(contact_body_ori[i].T, np.dot(ref_body_ori[i], mm.getSO3FromVectors(np.dot(ref_body_ori[i], up_vec_in_each_link[contact_ids[i]]), mm.unitY()))) for i in range(len(contact_body_ori))]))
a_oris = list(map(mm.logSO3, [np.dot(np.dot(ref_body_ori[i], mm.getSO3FromVectors(np.dot(ref_body_ori[i], up_vec_in_each_link[contact_ids[i]]), mm.unitY())), contact_body_ori[i].T) for i in range(len(contact_body_ori))]))
body_qs = list(map(mm.logSO3, contact_body_ori))
body_angs = [np.dot(contact_body_ori[i], contact_body_angvel[i]) for i in range(len(contact_body_ori))]
body_dqs = [mm.vel2qd(body_angs[i], body_qs[i]) for i in range(len(body_angs))]
# a_oris = [np.dot(contact_body_ori[i], mm.qdd2accel(body_ddqs[i], body_dqs[i], body_qs[i])) for i in range(len(contact_body_ori))]
# body_ddq = body_ddqs[0]
# body_ori = contact_body_ori[0]
# body_ang = np.dot(body_ori.T, contact_body_angvel[0])
#
# body_q = mm.logSO3(body_ori)
# body_dq = mm.vel2qd(body_ang, body_q)
# a_ori = np.dot(body_ori, mm.qdd2accel(body_ddq, body_dq, body_q))
KT_SUP = np.diag([kt_sup/10., kt_sup, kt_sup/10.])
# KT_SUP = np.diag([kt_sup, kt_sup, kt_sup])
# a_oris = list(map(mm.logSO3, [mm.getSO3FromVectors(np.dot(body_ori, mm.unitY()), mm.unitY()) for body_ori in contact_body_ori]))
# a_oris = list(map(mm.logSO3, [mm.getSO3FromVectors(np.dot(contact_body_ori[i], up_vec_in_each_link[contact_ids[i]]), mm.unitY()) for i in range(len(contact_body_ori))]))
# a_sups = [np.append(kt_sup*(ref_body_pos[i] - contact_body_pos[i] + contMotionOffset) + dt_sup*(ref_body_vel[i] - contact_body_vel[i]),
# kt_sup*a_oris[i]+dt_sup*(ref_body_angvel[i]-contact_body_angvel[i])) for i in range(len(a_oris))]
# a_sups = [np.append(kt_sup*(ref_body_pos[i] - contact_body_pos[i] + contMotionOffset) - dt_sup * contact_body_vel[i],
# kt_sup*a_oris[i] - dt_sup * contact_body_angvel[i]) for i in range(len(a_oris))]
a_sups = [np.append(np.dot(KT_SUP, (ref_body_pos[i] - contact_body_pos[i] + contMotionOffset)) - dt_sup * contact_body_vel[i],
kt_sup*a_oris[i] - dt_sup * contact_body_angvel[i]) for i in range(len(a_oris))]
# for i in range(len(a_sups)):
# a_sups[i][1] = -kt_sup * contact_body_pos[i][1] - dt_sup * contact_body_vel[i][1]
# momentum matrix
RS = np.dot(P, Jsys)
R, S = np.vsplit(RS, 2)
# rs = np.dot((np.dot(dP, Jsys) + np.dot(P, dJsys)), dth_flat)
rs = np.dot(dP, np.dot(Jsys, dth_flat)) + np.dot(P, dJsys)
r_bias, s_bias = np.hsplit(rs, 2)
#######################################################
# optimization
#######################################################
# if contact == 2 and footCenterR[1] > doubleTosingleOffset/2:
if contact_left and not contact_right:
config['weightMap']['RightUpLeg'] = .8
config['weightMap']['RightLeg'] = .8
config['weightMap']['RightFoot'] = .8
else:
config['weightMap']['RightUpLeg'] = .1
config['weightMap']['RightLeg'] = .25
config['weightMap']['RightFoot'] = .2
# if contact == 1 and footCenterL[1] > doubleTosingleOffset/2:
if contact_right and not contact_left:
config['weightMap']['LeftUpLeg'] = .8
config['weightMap']['LeftLeg'] = .8
config['weightMap']['LeftFoot'] = .8
else:
config['weightMap']['LeftUpLeg'] = .1
config['weightMap']['LeftLeg'] = .25
config['weightMap']['LeftFoot'] = .2
w = mot.getTrackingWeight(DOFs, motion[0].skeleton, config['weightMap'])
mot.addTrackingTerms(problem, totalDOF, Bt, w, ddth_des_flat)
if dH_des is not None:
mot.addLinearTerms(problem, totalDOF, Bl, dL_des_plane, R, r_bias)
mot.addAngularTerms(problem, totalDOF, Bh, dH_des, S, s_bias)
if True:
for c_idx in range(len(contact_ids)):
mot.addConstraint2(problem, totalDOF, J_contacts[c_idx], dJ_contacts[c_idx], dth_flat, a_sups[c_idx])
if contactChangeCount > 0:
contactChangeCount = contactChangeCount - 1
if contactChangeCount == 0:
maxContactChangeCount = 30
contactChangeType = 0
r = problem.solve()
problem.clear()
ddth_sol_flat = np.asarray(r['x'])
# ddth_sol_flat[foot_seg_dofs] = np.array(ddth_des_flat)[foot_seg_dofs]
ype.nested(ddth_sol_flat, ddth_sol)
rootPos[0] = controlModel.getBodyPositionGlobal(selectedBody)
localPos = [[0, 0, 0]]
for i in range(stepsPerFrame):
# apply penalty force
bodyIDs, contactPositions, contactPositionLocals, contactForces = vpWorld.calcPenaltyForce(bodyIDsToCheck, mus, Ks, Ds)
# bodyIDs, contactPositions, contactPositionLocals, contactForces, contactVelocities = vpWorld.calcManyPenaltyForce(0, bodyIDsToCheck, mus, Ks, Ds)
vpWorld.applyPenaltyForce(bodyIDs, contactPositionLocals, contactForces)
controlModel.setDOFAccelerations(ddth_sol)
# controlModel.setDOFAccelerations(ddth_des)
# controlModel.set_ddq(ddth_sol_flat)
# controlModel.set_ddq(ddth_des_flat)
controlModel.solveHybridDynamics()
if forceShowTime > viewer.objectInfoWnd.labelForceDur.value():
forceShowTime = 0
viewer_ResetForceState()
forceforce = np.array([viewer.objectInfoWnd.labelForceX.value(), viewer.objectInfoWnd.labelForceY.value(), viewer.objectInfoWnd.labelForceZ.value()])
extraForce[0] = getParamVal('Fm') * mm.normalize2(forceforce)
if viewer_GetForceState():
forceShowTime += wcfg.timeStep
vpWorld.applyPenaltyForce(selectedBodyId, localPos, extraForce)
vpWorld.step()
controlModel_ik.set_q(controlModel.get_q())
# rendering
bodyIDs, geomIDs, positionLocalsForGeom = vpWorld.getContactInfoForcePlate(bodyIDsToCheck)
for foot_seg_id in footIdlist:
control_model_renderer.body_colors[foot_seg_id] = (255, 240, 255)
control_model_renderer.geom_colors[foot_seg_id] = [(255, 240, 255)] * controlModel.getBodyGeomNum(foot_seg_id)
for i in range(len(geomIDs)):
if controlModel.vpid2index(bodyIDs[i]) in footIdlist:
control_model_renderer.geom_colors[controlModel.vpid2index(bodyIDs[i])][geomIDs[i]] = (255, 0, 0)
# for foot_seg_id in footIdlist:
# control_model_renderer.body_colors[foot_seg_id] = (255, 240, 255)
#
# for contact_id in contact_ids:
# control_model_renderer.body_colors[contact_id] = (255, 0, 0)
rd_footCenter[0] = footCenter
rd_footCenter_ref[0] = footCenter_ref
rd_CM[0] = CM
rd_CM_plane[0] = CM.copy()
rd_CM_plane[0][1] = 0.
if CP is not None and dCP is not None:
rd_CP[0] = CP
rd_CP_des[0] = CP_des
rd_dL_des_plane[0] = [dL_des_plane[0]/100, dL_des_plane[1]/100, dL_des_plane[2]/100]
rd_dH_des[0] = dH_des
rd_grf_des[0] = dL_des_plane - totalMass * mm.s2v(wcfg.gravity)
del rd_foot_ori[:]
del rd_foot_pos[:]
# for seg_foot_id in footIdlist:
# rd_foot_ori.append(controlModel.getJointOrientationGlobal(seg_foot_id))
# rd_foot_pos.append(controlModel.getJointPositionGlobal(seg_foot_id))
rd_foot_ori.append(controlModel.getJointOrientationGlobal(supL))
rd_foot_ori.append(controlModel.getJointOrientationGlobal(supR))
rd_foot_pos.append(controlModel.getJointPositionGlobal(supL))
rd_foot_pos.append(controlModel.getJointPositionGlobal(supR))
rd_foot_ori.append(controlModel.getJointOrientationGlobal(13))
rd_foot_ori.append(controlModel.getJointOrientationGlobal(14))
rd_foot_pos.append(controlModel.getJointPositionGlobal(13))
rd_foot_pos.append(controlModel.getJointPositionGlobal(14))
rd_root_des[0] = rootPos[0]
rd_root_ori[0] = controlModel.getBodyOrientationGlobal(0)
rd_root_pos[0] = controlModel.getBodyPositionGlobal(0)
del rd_CF[:]
del rd_CF_pos[:]
for i in range(len(contactPositions)):
rd_CF.append(contactForces[i]/400)
rd_CF_pos.append(contactPositions[i].copy())
if viewer_GetForceState():
rd_exfen_des[0] = [extraForce[0][0]/100, extraForce[0][1]/100, extraForce[0][2]/100]
rd_exf_des[0] = [0, 0, 0]
else:
rd_exf_des[0] = [extraForce[0][0]/100, extraForce[0][1]/100, extraForce[0][2]/100]
rd_exfen_des[0] = [0, 0, 0]
# extraForcePos[0] = controlModel.getBodyPositionGlobal(selectedBody)
extraForcePos[0] = controlModel.getBodyPositionGlobal(selectedBody) - 0.1 * np.array([viewer.objectInfoWnd.labelForceX.value(), 0., viewer.objectInfoWnd.labelForceZ.value()])
# render contact_ids
# render skeleton
if SKELETON_ON:
Ts = dict()
Ts['pelvis'] = controlModel.getJointTransform(idDic['Hips'])
Ts['thigh_R'] = controlModel.getJointTransform(idDic['RightUpLeg'])
Ts['shin_R'] = controlModel.getJointTransform(idDic['RightLeg'])
Ts['foot_R'] = controlModel.getJointTransform(idDic['RightFoot'])
Ts['foot_heel_R'] = controlModel.getJointTransform(idDic['RightFoot'])
Ts['heel_R'] = np.eye(4)
Ts['outside_metatarsal_R'] = controlModel.getJointTransform(idDic['RightFoot_foot_0_0'])
Ts['outside_phalanges_R'] = controlModel.getJointTransform(idDic['RightFoot_foot_0_0_0'])
# Ts['inside_metatarsal_R'] = controlModel.getJointTransform(idDic['RightFoot_foot_0_1'])
Ts['inside_metatarsal_R'] = np.eye(4)
Ts['inside_phalanges_R'] = controlModel.getJointTransform(idDic['RightFoot_foot_0_1_0'])
Ts['spine_ribs'] = controlModel.getJointTransform(idDic['Spine'])
Ts['head'] = controlModel.getJointTransform(idDic['Spine1'])
Ts['upper_limb_R'] = controlModel.getJointTransform(idDic['RightArm'])
Ts['lower_limb_R'] = controlModel.getJointTransform(idDic['RightForeArm'])
Ts['thigh_L'] = controlModel.getJointTransform(idDic['LeftUpLeg'])
Ts['shin_L'] = controlModel.getJointTransform(idDic['LeftLeg'])
Ts['foot_L'] = controlModel.getJointTransform(idDic['LeftFoot'])
Ts['foot_heel_L'] = controlModel.getJointTransform(idDic['LeftFoot'])
Ts['heel_L'] = np.eye(4)
Ts['outside_metatarsal_L'] = controlModel.getJointTransform(idDic['LeftFoot_foot_0_0'])
Ts['outside_phalanges_L'] = controlModel.getJointTransform(idDic['LeftFoot_foot_0_0_0'])
# Ts['inside_metatarsal_L'] = controlModel.getJointTransform(idDic['LeftFoot_foot_0_1'])
Ts['inside_metatarsal_L'] = np.eye(4)
Ts['inside_phalanges_L'] = controlModel.getJointTransform(idDic['LeftFoot_foot_0_1_0'])
Ts['upper_limb_L'] = controlModel.getJointTransform(idDic['LeftArm'])
Ts['lower_limb_L'] = controlModel.getJointTransform(idDic['LeftForeArm'])
skeleton_renderer.appendFrameState(Ts)
def simulateCallback(frame):
# print(frame)
# print(motion[frame].getJointOrientationLocal(footIdDic['RightFoot_foot_0_1_0']))
# hfi.footAdjust(motion[frame], idDic, SEGMENT_FOOT_MAG=.03, SEGMENT_FOOT_RAD=.015, baseHeight=0.02)
# motionModel.update(motion[frame])
motionModel.translateByOffset(
np.array([
getParamVal('com X offset'),
getParamVal('com Y offset'),
getParamVal('com Z offset')
]))
# controlModel_ik.set_q(controlModel.get_q())
global g_initFlag
global forceShowTime
global JsysPre
global JsupPreL
global JsupPreR
global JconstPre
global preFootCenter
global maxContactChangeCount
global contactChangeCount
global contact
global contactChangeType
Kt, Kl, Kh, Bl, Bh, kt_sup = getParamVals(
['Kt', 'Kl', 'Kh', 'Bl', 'Bh', 'SupKt'])
Dt = 2 * (Kt**.5)
Dl = 2 * (Kl**.5)
Dh = 2 * (Kh**.5)
dt_sup = 2 * (kt_sup**.5)
# tracking
# # th_r = motion.getDOFPositions(frame)
# th_r = motionModel.getDOFPositions()
# th = controlModel.getDOFPositions()
# # dth_r = motion.getDOFVelocities(frame)
# dth = controlModel.getDOFVelocities()
# # ddth_r = motion.getDOFAccelerations(frame)
# ddth_des = yct.getDesiredDOFAccelerations(th_r, th, None, dth, None, Kt, Dt)
#
# # ype.flatten(fix_dofs(DOFs, ddth_des, mcfg, joint_names), ddth_des_flat)
# # ype.flatten(fix_dofs(DOFs, dth, mcfg, joint_names), dth_flat)
# # print(ddth_des)
# ype.flatten(ddth_des, ddth_des_flat)
# ype.flatten(dth, dth_flat)
th_r_flat = motionModel.get_q()
th_flat = controlModel.get_q()
dth_flat = controlModel.get_dq()
joint_dof_info = controlModel.getJointDOFInfo()
ddth_des_flat = yct.getDesiredDOFAccelerations_flat(
th_r_flat, th_flat, None, dth_flat, None, Kt, Dt, joint_dof_info)
# print(controlModel.getCoriAndGrav())
#################################################
# jacobian
#################################################
contact_des_ids = list() # desired contact segments
contact_des_ids.append(supL)
# if foot_viewer.check_h_l.value():
# contact_des_ids.append(motion[0].skeleton.getJointIndex('LeftFoot'))
#
# if foot_viewer.check_h_r.value():
# contact_des_ids.append(motion[0].skeleton.getJointIndex('RightFoot'))
contact_ids = list() # temp idx for balancing
contact_ids.extend(contact_des_ids)
contact_joint_ori = list(
map(controlModel.getJointOrientationGlobal, contact_ids))
contact_joint_pos = list(
map(controlModel.getJointPositionGlobal, contact_ids))
contact_body_ori = list(
map(controlModel.getBodyOrientationGlobal, contact_ids))
contact_body_pos = list(
map(controlModel.getBodyPositionGlobal, contact_ids))
contact_body_vel = list(
map(controlModel.getBodyVelocityGlobal, contact_ids))
contact_body_angvel = list(
map(controlModel.getBodyAngVelocityGlobal, contact_ids))
ref_joint_ori = list(
map(motionModel.getJointOrientationGlobal, contact_ids))
ref_joint_pos = list(
map(motionModel.getJointPositionGlobal, contact_ids))
ref_joint_vel = [
motionModel.getJointVelocityGlobal(joint_idx)
for joint_idx in contact_ids
]
ref_joint_angvel = [
motionModel.getJointAngVelocityGlobal(joint_idx)
for joint_idx in contact_ids
]
ref_body_ori = list(
map(motionModel.getBodyOrientationGlobal, contact_ids))
ref_body_pos = list(map(motionModel.getBodyPositionGlobal,
contact_ids))
# ref_body_vel = list(map(controlModel.getBodyVelocityGlobal, contact_ids))
ref_body_angvel = [
motionModel.getJointAngVelocityGlobal(joint_idx)
for joint_idx in contact_ids
]
ref_body_vel = [
ref_joint_vel[i] +
np.cross(ref_joint_angvel[i], ref_body_pos[i] - ref_joint_pos[i])
for i in range(len(ref_joint_vel))
]
is_contact = [1] * len(contact_ids)
contact_right = len(set(contact_des_ids).intersection(rIDlist)) > 0
contact_left = len(set(contact_des_ids).intersection(lIDlist)) > 0
# contMotionOffset = th_flat[0:3] - th_r_flat[0:3]
contMotionOffset = np.array((1.5, 0., 0.))
linkPositions = [
controlModel.getBodyComPositionGlobal(i)
for i in range(controlModel.getBodyNum())
]
linkVelocities = [
controlModel.getBodyComVelocityGlobal(i)
for i in range(controlModel.getBodyNum())
]
linkAngVelocities = [
controlModel.getBodyAngVelocityGlobal(i)
for i in range(controlModel.getBodyNum())
]
linkInertias = [
controlModel.getBodyInertiaGlobal(i)
for i in range(controlModel.getBodyNum())
]
CM = yrp.getCM(linkPositions, linkMasses, totalMass)
dCM = yrp.getCM(linkVelocities, linkMasses, totalMass)
CM_plane = copy.copy(CM)
CM_plane[1] = 0.
dCM_plane = copy.copy(dCM)
dCM_plane[1] = 0.
P = ymt.getPureInertiaMatrix(TO, linkMasses, linkPositions, CM,
linkInertias)
dP = ymt.getPureInertiaMatrixDerivative(dTO, linkMasses,
linkVelocities, dCM,
linkAngVelocities,
linkInertias)
# calculate jacobian
Jsys, dJsys = controlModel.computeCom_J_dJdq()
J_contacts = [] # type: list[np.ndarray]
dJ_contacts = [] # type: list[np.ndarray]
for contact_id in contact_ids:
J_contacts.append(Jsys[6 * contact_id:6 * contact_id + 6, :])
dJ_contacts.append(dJsys[6 * contact_id:6 * contact_id + 6])
# calculate footCenter
footCenter = sum(contact_body_pos) / len(contact_body_pos) if len(contact_body_pos) > 0 \
else .5 * (controlModel.getBodyComPositionGlobal(supL) + controlModel.getBodyComPositionGlobal(supR))
footCenter[1] = 0.
# if len(contact_body_pos) > 2:
# hull = ConvexHull(contact_body_pos)
footCenter_ref = sum(ref_body_pos) / len(ref_body_pos) if len(ref_body_pos) > 0 \
else .5 * (motionModel.getBodyComPositionGlobal(supL) + motionModel.getBodyComPositionGlobal(supR))
footCenter_ref = footCenter_ref + contMotionOffset
# if len(ref_body_pos) > 2:
# hull = ConvexHull(ref_body_pos)
footCenter_ref[1] = 0.
# footCenter[0] = footCenter[0] + getParamVal('com X offset')
# footCenter[1] = footCenter[0] + getParamVal('com Y offset')
# footCenter[2] = footCenter[2] + getParamVal('com Z offset')
# initialization
if g_initFlag == 0:
preFootCenter[0] = footCenter.copy()
g_initFlag = 1
# if contactChangeCount == 0 and np.linalg.norm(footCenter - preFootCenter[0]) > 0.01:
# contactChangeCount += 30
if contactChangeCount > 0:
# change footcenter gradually
footCenter = preFootCenter[0] + (
maxContactChangeCount - contactChangeCount) * (
footCenter - preFootCenter[0]) / maxContactChangeCount
else:
preFootCenter[0] = footCenter.copy()
# linear momentum
# TODO:
# We should consider dCM_ref, shouldn't we?
# add getBodyPositionGlobal and getBodyPositionsGlobal in csVpModel!
# to do that, set joint velocities to vpModel
CM_ref_plane = footCenter
# CM_ref_plane = footCenter_ref
CM_ref = footCenter + np.array([
getParamVal('com X offset'),
motionModel.getCOM()[1] + getParamVal('com Y offset'),
getParamVal('com Z offset')
])
dL_des_plane = Kl * totalMass * (CM_ref - CM) - Dl * totalMass * dCM
# dL_des_plane = Kl * totalMass * (CM_ref_plane - CM_plane) - Dl * totalMass * dCM_plane
# dL_des_plane[1] = 0.
# print('dCM_plane : ', np.linalg.norm(dCM_plane))
# angular momentum
CP_ref = footCenter
# CP_ref = footCenter_ref
bodyIDs, contactPositions, contactPositionLocals, contactForces = controlModel.calcPenaltyForce(
bodyIDsToCheck, mus, Ks, Ds)
CP = yrp.getCP(contactPositions, contactForces)
if CP_old[0] is None or CP is None:
dCP = None
else:
dCP = (CP - CP_old[0]) / (1 / 30.)
CP_old[0] = CP
if CP is not None and dCP is not None:
ddCP_des = Kh * (CP_ref - CP) - Dh * dCP
dCP_des = dCP + ddCP_des * (1 / 30.)
CP_des = CP + dCP_des * (1 / 30.)
# CP_des = footCenter
CP_des = CP + dCP * (1 / 30.) + .5 * ddCP_des * ((1 / 30.)**2)
dH_des = np.cross(
(CP_des - CM),
(dL_des_plane + totalMass * controlModel.getGravity()))
if contactChangeCount > 0: # and contactChangeType == 'DtoS':
dH_des *= (maxContactChangeCount -
contactChangeCount) / maxContactChangeCount
else:
dH_des = None
# set up equality constraint
# TODO:
# logSO3 is just q'', not acceleration.
# To make a_oris acceleration, q'' -> a will be needed
# body_ddqs = list(map(mm.logSO3, [mm.getSO3FromVectors(np.dot(body_ori, mm.unitY()), mm.unitY()) for body_ori in contact_body_ori]))
# body_ddqs = list(map(mm.logSO3, [np.dot(contact_body_ori[i].T, np.dot(ref_body_ori[i], mm.getSO3FromVectors(np.dot(ref_body_ori[i], mm.unitY()), mm.unitY()))) for i in range(len(contact_body_ori))]))
# body_ddqs = list(map(mm.logSO3, [np.dot(contact_body_ori[i].T, np.dot(ref_body_ori[i], mm.getSO3FromVectors(np.dot(ref_body_ori[i], up_vec_in_each_link[contact_ids[i]]), mm.unitY()))) for i in range(len(contact_body_ori))]))
a_oris = list(
map(mm.logSO3, [
np.dot(
contact_body_ori[i].T,
np.dot(
ref_body_ori[i],
mm.getSO3FromVectors(
np.dot(ref_body_ori[i],
up_vec_in_each_link[contact_ids[i]]),
mm.unitY()))) for i in range(len(contact_body_ori))
]))
a_oris = list(
map(mm.logSO3, [
np.dot(
np.dot(
ref_body_ori[i],
mm.getSO3FromVectors(
np.dot(ref_body_ori[i],
up_vec_in_each_link[contact_ids[i]]),
mm.unitY())), contact_body_ori[i].T)
for i in range(len(contact_body_ori))
]))
body_qs = list(map(mm.logSO3, contact_body_ori))
body_angs = [
np.dot(contact_body_ori[i], contact_body_angvel[i])
for i in range(len(contact_body_ori))
]
body_dqs = [
mm.vel2qd(body_angs[i], body_qs[i]) for i in range(len(body_angs))
]
# a_oris = [np.dot(contact_body_ori[i], mm.qdd2accel(body_ddqs[i], body_dqs[i], body_qs[i])) for i in range(len(contact_body_ori))]
# body_ddq = body_ddqs[0]
# body_ori = contact_body_ori[0]
# body_ang = np.dot(body_ori.T, contact_body_angvel[0])
#
# body_q = mm.logSO3(body_ori)
# body_dq = mm.vel2qd(body_ang, body_q)
# a_ori = np.dot(body_ori, mm.qdd2accel(body_ddq, body_dq, body_q))
KT_SUP = np.diag([kt_sup / 10., kt_sup, kt_sup / 10.])
# KT_SUP = np.diag([kt_sup, kt_sup, kt_sup])
# a_oris = list(map(mm.logSO3, [mm.getSO3FromVectors(np.dot(body_ori, mm.unitY()), mm.unitY()) for body_ori in contact_body_ori]))
a_oris = list(
map(mm.logSO3, [
mm.getSO3FromVectors(
np.dot(contact_body_ori[i],
up_vec_in_each_link[contact_ids[i]]), mm.unitY())
for i in range(len(contact_body_ori))
]))
# a_sups = [np.append(kt_sup*(ref_body_pos[i] - contact_body_pos[i] + contMotionOffset) + dt_sup*(ref_body_vel[i] - contact_body_vel[i]),
# kt_sup*a_oris[i]+dt_sup*(ref_body_angvel[i]-contact_body_angvel[i])) for i in range(len(a_oris))]
# a_sups = [np.append(kt_sup*(ref_body_pos[i] - contact_body_pos[i] + contMotionOffset) - dt_sup * contact_body_vel[i],
# kt_sup*a_oris[i] - dt_sup * contact_body_angvel[i]) for i in range(len(a_oris))]
a_sups = [
np.append(
np.dot(KT_SUP,
(ref_body_pos[i] - contact_body_pos[i] +
contMotionOffset)) - dt_sup * contact_body_vel[i],
kt_sup * a_oris[i] - dt_sup * contact_body_angvel[i])
for i in range(len(a_oris))
]
# for i in range(len(a_sups)):
# a_sups[i][1] = -kt_sup * contact_body_pos[i][1] - dt_sup * contact_body_vel[i][1]
# momentum matrix
RS = np.dot(P, Jsys)
R, S = np.vsplit(RS, 2)
# rs = np.dot((np.dot(dP, Jsys) + np.dot(P, dJsys)), dth_flat)
rs = np.dot(dP, np.dot(Jsys, dth_flat)) + np.dot(P, dJsys)
r_bias, s_bias = np.hsplit(rs, 2)
#######################################################
# optimization
#######################################################
if LEG_FLEXIBLE:
if contact == 2:
config['weightMap']['h_thigh_right'] = .8
config['weightMap']['h_shin_right'] = .8
config['weightMap']['h_heel_right'] = .8
else:
config['weightMap']['h_thigh_right'] = .1
config['weightMap']['h_shin_right'] = .25
config['weightMap']['h_heel_right'] = .2
if contact == 1:
config['weightMap']['h_thigh_left'] = .8
config['weightMap']['h_shin_left'] = .8
config['weightMap']['h_heel_left'] = .8
else:
config['weightMap']['h_thigh_left'] = .1
config['weightMap']['h_shin_left'] = .25
config['weightMap']['h_heel_left'] = .2
w = mot.getTrackingWeight(DOFs, controlModel, config['weightMap'])
mot.addTrackingTerms(problem, totalDOF, Bt, w, ddth_des_flat)
if dH_des is not None:
mot.addLinearTerms(problem, totalDOF, Bl, dL_des_plane, R, r_bias)
mot.addAngularTerms(problem, totalDOF, Bh, dH_des, S, s_bias)
if True:
for c_idx in range(len(contact_ids)):
mot.addConstraint2(problem, totalDOF, J_contacts[c_idx],
dJ_contacts[c_idx], dth_flat,
a_sups[c_idx])
if contactChangeCount > 0:
contactChangeCount = contactChangeCount - 1
if contactChangeCount == 0:
maxContactChangeCount = 30
contactChangeType = 0
r = problem.solve()
problem.clear()
ddth_sol_flat = np.asarray(r['x'])
# ddth_sol_flat[foot_seg_dofs] = np.array(ddth_des_flat)[foot_seg_dofs]
# ype.nested(ddth_sol_flat, ddth_sol)
rootPos[0] = controlModel.getBodyPositionGlobal(selectedBody)
localPos = [[0, 0, 0]]
for _ in range(stepsPerFrame):
bodyIDs, contactPositions, contactPositionLocals, contactForces = controlModel.calcPenaltyForce(
bodyIDsToCheck, mus, Ks, Ds)
controlModel.applyPenaltyForce(bodyIDs, contactPositionLocals,
contactForces)
# apply penalty force
# controlModel.setDOFAccelerations(ddth_sol)
# controlModel.setDOFAccelerations(ddth_des)
controlModel.set_ddq(ddth_sol_flat)
# controlModel.set_ddq(ddth_des_flat)
controlModel.solveHybridDynamics()
if forceShowTime > viewer.objectInfoWnd.labelForceDur.value():
forceShowTime = 0
viewer_ResetForceState()
forceforce = np.array([
viewer.objectInfoWnd.labelForceX.value(),
viewer.objectInfoWnd.labelForceY.value(),
viewer.objectInfoWnd.labelForceZ.value()
])
extraForce[0] = getParamVal('Fm') * mm.normalize2(forceforce)
if viewer_GetForceState():
forceShowTime += controlModel.getTimeStep()
controlModel.applyPenaltyForce(selectedBodyId, localPos,
extraForce)
controlModel.step()
# rendering
# bodyIDs, geomIDs, positionLocalsForGeom = vpWorld.getContactInfoForcePlate(bodyIDsToCheck)
# for foot_seg_id in footIdlist:
# control_model_renderer.body_colors[foot_seg_id] = (255, 240, 255)
# control_model_renderer.geom_colors[foot_seg_id] = [(255, 240, 255)] * controlModel.getBodyGeomNum(foot_seg_id)
# for i in range(len(geomIDs)):
# if controlModel.vpid2index(bodyIDs[i]) in footIdlist:
# control_model_renderer.geom_colors[controlModel.vpid2index(bodyIDs[i])][geomIDs[i]] = (255, 0, 0)
# for foot_seg_id in footIdlist:
# control_model_renderer.body_colors[foot_seg_id] = (255, 240, 255)
#
# for contact_id in contact_ids:
# control_model_renderer.body_colors[contact_id] = (255, 0, 0)
rd_footCenter[0] = footCenter
rd_footCenter_ref[0] = footCenter_ref
rd_CM[0] = CM
rd_CM_plane[0] = CM.copy()
rd_CM_plane[0][1] = 0.
if CP is not None and dCP is not None:
rd_CP[0] = CP
rd_CP_des[0] = CP_des
rd_dL_des_plane[0] = [
dL_des_plane[0] / 100, dL_des_plane[1] / 100,
dL_des_plane[2] / 100
]
rd_dH_des[0] = dH_des
rd_grf_des[
0] = dL_des_plane - totalMass * controlModel.getGravity()
del rd_foot_ori[:]
del rd_foot_pos[:]
# for seg_foot_id in footIdlist:
# rd_foot_ori.append(controlModel.getJointOrientationGlobal(seg_foot_id))
# rd_foot_pos.append(controlModel.getJointPositionGlobal(seg_foot_id))
rd_foot_ori.append(controlModel.getJointOrientationGlobal(supL))
rd_foot_ori.append(controlModel.getJointOrientationGlobal(supR))
rd_foot_pos.append(controlModel.getJointPositionGlobal(supL))
rd_foot_pos.append(controlModel.getJointPositionGlobal(supR))
del rd_body_ori[:]
del rd_body_pos[:]
# for body_idx in range(dartModel.getBodyNum()):
rd_root_des[0] = rootPos[0]
rd_root_ori[0] = controlModel.getBodyOrientationGlobal(0)
rd_root_pos[0] = controlModel.getBodyPositionGlobal(0)
del rd_CF[:]
del rd_CF_pos[:]
for i in range(len(contactPositions)):
rd_CF.append(contactForces[i] / 400)
rd_CF_pos.append(contactPositions[i].copy())
if viewer_GetForceState():
rd_exfen_des[0] = [
extraForce[0][0] / 100, extraForce[0][1] / 100,
extraForce[0][2] / 100
]
rd_exf_des[0] = [0, 0, 0]
else:
rd_exf_des[0] = [
extraForce[0][0] / 100, extraForce[0][1] / 100,
extraForce[0][2] / 100
]
rd_exfen_des[0] = [0, 0, 0]
# extraForcePos[0] = controlModel.getBodyPositionGlobal(selectedBody)
extraForcePos[0] = controlModel.getBodyPositionGlobal(
selectedBody) - 0.1 * np.array([
viewer.objectInfoWnd.labelForceX.value(), 0.,
viewer.objectInfoWnd.labelForceZ.value()
])