def build_curve_network(event=None, enforce_tangency=True):
'''
mimic the curve network surfacing command from rhino
'''
root_compound_shape = read_step_file("../assets/models/splinecage.stp")
topology_explorer = TopologyExplorer(root_compound_shape)
# approximate the hell out of all surfaces and curves
# I wanna see it in its full glory
display.Context.SetDeviationAngle(0.00001) # 0.001 -> default
display.Context.SetDeviationCoefficient(0.0001) # 0.001 -> default
tangent_constraint_faces = [f for f in topology_explorer.faces()]
# loop through the imported faces
# associate the length of each of the faces edges to the corresponding face
_edge_length_to_face, _edge_length_to_edge = hash_edge_lenght_to_face(
tangent_constraint_faces)
# loop through the imported curves, avoiding the imported faces
# when we've got these filtered out, we retrieved the geometry to build the surface from
filtered_edges = [
e for e in topology_explorer._loop_topo(
TopAbs_EDGE, root_compound_shape, TopAbs_FACE)
]
filtered_length = {}
for e in filtered_edges:
l = round(length_from_edge(e), 3)
filtered_length[l] = e
input_edge_face_pairs, edges_no_adjacent_face = [], []
for l, edg in filtered_length.items():
if l in _edge_length_to_edge:
edge_face_pair = [_edge_length_to_edge[l], _edge_length_to_face[l]]
input_edge_face_pairs.append(edge_face_pair)
else:
edges_no_adjacent_face.append(edg)
brep_plate_builder = BRepOffsetAPI_MakeFilling()
if enforce_tangency:
print("going for surface quality")
brep_plate_builder.SetConstrParam(
0.0001, 0.001, 0.01,
0.01) # ?!!! Tol2d=1.0, Tol3d=1.0, TolAng=1.0, TolCurv=1.0
brep_plate_builder.SetApproxParam(8, 240) # MaxDeg=8, MaxSegments=9
brep_plate_builder.SetResolParam(
3, 64, 3) # Degree=3, NbPtsOnCur=15, NbIter=2, Anisotropie=0
else:
print("quick and dirty")
# illegal instruction 4???
for i in input_edge_face_pairs:
display.DisplayShape(i, color=random_color())
constraint_edg, support_face = i
if constraint_edg.IsNull() or support_face.IsNull():
print("OMG null")
brep_plate_builder.Add(constraint_edg, support_face, GeomAbs_G1)
# not entirely sure why this fails... how is that different from adding from points?
# for e in edges_no_adjacent_face:
# brep_plate_builder.Add(e, GeomAbs_C0)
# libc++abi.dylib: terminating with uncaught exception of type Standard_OutOfRange
for e in edges_no_adjacent_face:
display.DisplayShape(e)
for pt in divide_edge_by_nr_of_points(e, 12)[2:-2]:
brep_plate_builder.Add(pt[1])
brep_plate_builder.Build()
if brep_plate_builder.IsDone():
face = brep_plate_builder.Shape()
display.DisplayColoredShape(face, "ORANGE")
else:
print("constructing the surface failed")
def build_curve_network(event=None, enforce_tangency=True):
'''
mimic the curve network surfacing command from rhino
'''
root_compound_shape = read_step_file("../assets/models/splinecage.stp")
topology_explorer = TopologyExplorer(root_compound_shape)
tangent_constraint_faces = [f for f in topology_explorer.faces()]
# loop through the imported faces
# associate the length of each of the faces edges to the corresponding face
_edge_length_to_face, _edge_length_to_edge = hash_edge_length_to_face(
tangent_constraint_faces)
# loop through the imported curves, avoiding the imported faces
# when we've got these filtered out, we retrieved the geometry to build the surface from
filtered_edges = [
e for e in topology_explorer._loop_topo(
TopAbs_EDGE, root_compound_shape, TopAbs_FACE)
]
filtered_length = {}
for e in filtered_edges:
l = round(length_from_edge(e), 3)
filtered_length[l] = e
input_edge_face_pairs, edges_no_adjacent_face = [], []
for l, edg in filtered_length.items():
if l in _edge_length_to_edge:
edge_face_pair = [_edge_length_to_edge[l], _edge_length_to_face[l]]
input_edge_face_pairs.append(edge_face_pair)
else:
edges_no_adjacent_face.append(edg)
brep_plate_builder = BRepOffsetAPI_MakeFilling()
if enforce_tangency:
print('going for surface quality...')
brep_plate_builder.SetConstrParam(
0.0001, 0.001, 0.01,
0.01) # Tol2d=1.0, Tol3d=1.0, TolAng=1.0, TolCurv=1.0
brep_plate_builder.SetApproxParam(8, 240) # MaxDeg=8, MaxSegments=9
print('done.')
else:
print("quick and dirty")
# illegal instruction 4???
for i in input_edge_face_pairs:
display.DisplayShape(i, color=random_color())
constraint_edg, support_face = i
if constraint_edg.IsNull() or support_face.IsNull():
print("Edge of face is null")
brep_plate_builder.Add(constraint_edg, support_face, GeomAbs_G1)
for e in edges_no_adjacent_face:
display.DisplayShape(e)
for pt in divide_edge_by_nr_of_points(e, 12)[2:-2]:
brep_plate_builder.Add(pt[1])
brep_plate_builder.Build()
if brep_plate_builder.IsDone():
face = brep_plate_builder.Shape()
display.DisplayColoredShape(face, "ORANGE")
else:
print("constructing the surface failed")