def create_shape(self):
data = self.element.attrib.get('d')
shapes = []
path = None
for cmd, params in self.parse_path(data):
if cmd == 'M':
if path is not None:
shapes.append(path.Wire())
path = BRepBuilderAPI_MakeWire()
last_pnt = gp_Pnt(params[0], params[1], 0)
start_pnt = last_pnt
elif cmd in ['L', 'H', 'V']:
pnt = gp_Pnt(params[0], params[1], 0)
path.Add(BRepBuilderAPI_MakeEdge(last_pnt, pnt).Edge())
last_pnt = pnt
elif cmd == 'Q':
# Quadratic Bezier
pts = TColgp_Array1OfPnt(1, 3)
pts.SetValue(1, last_pnt)
pts.SetValue(2, gp_Pnt(params[0], params[1], 0))
last_pnt = gp_Pnt(params[2], params[3], 0)
pts.SetValue(3, last_pnt)
curve = Geom_BezierCurve(pts)
path.Add(BRepBuilderAPI_MakeEdge(curve).Edge())
elif cmd == 'C':
# Cubic Bezier
pts = TColgp_Array1OfPnt(1, 4)
pts.SetValue(1, last_pnt)
pts.SetValue(2, gp_Pnt(params[0], params[1], 0))
pts.SetValue(3, gp_Pnt(params[2], params[3], 0))
last_pnt = gp_Pnt(params[4], params[5], 0)
pts.SetValue(4, last_pnt)
curve = Geom_BezierCurve(pts)
path.Add(BRepBuilderAPI_MakeEdge(curve).Edge())
elif cmd == 'A':
# Warning: Play at your own risk!
x1, y1 = last_pnt.X(), last_pnt.Y()
rx, ry, phi, large_arc_flag, sweep_flag, x2, y2 = params
phi = radians(phi)
pnt = gp_Pnt(x2, y2, 0)
cx, cy, rx, ry = compute_arc_center(x1, y1, rx, ry, phi,
large_arc_flag, sweep_flag,
x2, y2)
z_dir = Z_DIR if sweep_flag else NEG_Z_DIR # sweep_flag
c = make_ellipse((cx, cy, 0), rx, ry, phi, z_dir)
curve = GC_MakeArcOfEllipse(c, last_pnt, pnt, True).Value()
path.Add(BRepBuilderAPI_MakeEdge(curve).Edge())
last_pnt = pnt
elif cmd == 'Z':
if not last_pnt.IsEqual(start_pnt, 10e-6):
edge = BRepBuilderAPI_MakeEdge(last_pnt, start_pnt).Edge()
path.Add(edge)
shapes.append(path.Wire())
path = None # Close path
last_pnt = start_pnt
if path is not None:
shapes.append(path.Wire())
return shapes
def make_wire(*args):
# if we get an iterable, than add all edges to wire builder
if isinstance(args[0], list) or isinstance(args[0], tuple):
wire = BRepBuilderAPI_MakeWire()
for i in args[0]:
wire.Add(i)
wire.Build()
return wire.Wire()
wire = BRepBuilderAPI_MakeWire(*args)
wire.Build()
with assert_isdone(wire, 'failed to produce wire'):
result = wire.Wire()
return result
def brep_feat_local_revolution(event=None):
S = BRepPrimAPI_MakeBox(400., 250., 300.).Shape()
faces = list(TopologyExplorer(S).faces())
F1 = faces[2]
surf = BRep_Tool_Surface(F1)
D = gp_OX()
MW1 = BRepBuilderAPI_MakeWire()
p1 = gp_Pnt2d(100., 100.)
p2 = gp_Pnt2d(200., 100.)
aline = GCE2d_MakeLine(p1, p2).Value()
MW1.Add(BRepBuilderAPI_MakeEdge(aline, surf, 0., p1.Distance(p2)).Edge())
p1 = gp_Pnt2d(200., 100.)
p2 = gp_Pnt2d(150., 200.)
aline = GCE2d_MakeLine(p1, p2).Value()
MW1.Add(BRepBuilderAPI_MakeEdge(aline, surf, 0., p1.Distance(p2)).Edge())
p1 = gp_Pnt2d(150., 200.)
p2 = gp_Pnt2d(100., 100.)
aline = GCE2d_MakeLine(p1, p2).Value()
MW1.Add(BRepBuilderAPI_MakeEdge(aline, surf, 0., p1.Distance(p2)).Edge())
MKF1 = BRepBuilderAPI_MakeFace()
MKF1.Init(surf, False, 1e-6)
MKF1.Add(MW1.Wire())
FP = MKF1.Face()
breplib_BuildCurves3d(FP)
MKrev = BRepFeat_MakeRevol(S, FP, F1, D, 1, True)
F2 = faces[4]
MKrev.Perform(F2)
display.EraseAll()
display.DisplayShape(MKrev.Shape())
display.FitAll()
def update_shape(self, change=None):
d = self.declaration
edges = TopTools_ListOfShape()
wires = []
for c in self.children():
if not isinstance(c, OccShape):
continue
if c.shape is None:
raise ValueError("Cannot build wire from empty shape: %s" % c)
self.extract_edges(c, edges)
else:
for edge in d.edges:
if isinstance(edge, TopoDS_Edge):
edges.Append(edge)
else:
wires.append(edge)
builder = BRepBuilderAPI_MakeWire()
builder.Add(edges)
for w in wires:
builder.Add(w)
if not builder.IsDone():
log.warning('Edges must be connected %s' % d)
wire = builder.Wire()
if d.reverse:
wire.Reverse()
self.curve = BRepAdaptor_CompCurve(wire)
self.shape = wire
def extrusion(event=None):
# Make a box
Box = BRepPrimAPI_MakeBox(400., 250., 300.)
S = Box.Shape()
# Choose the first Face of the box
F = next(TopologyExplorer(S).faces())
surf = BRep_Tool_Surface(F)
# Make a plane from this face
Pln = Geom_Plane.DownCast(surf)
# Get the normal of this plane. This will be the direction of extrusion.
D = Pln.Axis().Direction()
# Inverse normal
D.Reverse()
# Create the 2D planar sketch
MW = BRepBuilderAPI_MakeWire()
p1 = gp_Pnt2d(200., -100.)
p2 = gp_Pnt2d(100., -100.)
aline = GCE2d_MakeLine(p1, p2).Value()
Edge1 = BRepBuilderAPI_MakeEdge(aline, surf, 0., p1.Distance(p2))
MW.Add(Edge1.Edge())
p1 = p2
p2 = gp_Pnt2d(100., -200.)
aline = GCE2d_MakeLine(p1, p2).Value()
Edge2 = BRepBuilderAPI_MakeEdge(aline, surf, 0., p1.Distance(p2))
MW.Add(Edge2.Edge())
p1 = p2
p2 = gp_Pnt2d(200., -200.)
aline = GCE2d_MakeLine(p1, p2).Value()
Edge3 = BRepBuilderAPI_MakeEdge(aline, surf, 0., p1.Distance(p2))
MW.Add(Edge3.Edge())
p1 = p2
p2 = gp_Pnt2d(200., -100.)
aline = GCE2d_MakeLine(p1, p2).Value()
Edge4 = BRepBuilderAPI_MakeEdge(aline, surf, 0., p1.Distance(p2))
MW.Add(Edge4.Edge())
# Build Face from Wire. NB: a face is required to generate a solid.
MKF = BRepBuilderAPI_MakeFace()
MKF.Init(surf, False, 1e-6)
MKF.Add(MW.Wire())
FP = MKF.Face()
breplib_BuildCurves3d(FP)
MKP = BRepFeat_MakePrism(S, FP, F, D, False, True)
MKP.Perform(200.)
# TODO MKP completes, seeing a split operation but no extrusion
assert MKP.IsDone()
res1 = MKP.Shape()
display.EraseAll()
display.DisplayColoredShape(res1, 'BLUE')
display.FitAll()
def __init__(self, *edges):
# Build
builder = BRepBuilderAPI_MakeWire()
for e in edges:
if e is not None and not e.is_null and e.is_edge:
builder.Add(e.object)
self._w = Wire(builder.Wire())
self._last_e = Edge(builder.Edge())
self._last_v = Vertex(builder.Vertex())
def brep_feat_rib(event=None):
mkw = BRepBuilderAPI_MakeWire()
mkw.Add(
BRepBuilderAPI_MakeEdge(gp_Pnt(0., 0., 0.), gp_Pnt(200., 0.,
0.)).Edge())
mkw.Add(
BRepBuilderAPI_MakeEdge(gp_Pnt(200., 0., 0.), gp_Pnt(200., 0.,
50.)).Edge())
mkw.Add(
BRepBuilderAPI_MakeEdge(gp_Pnt(200., 0., 50.), gp_Pnt(50., 0.,
50.)).Edge())
mkw.Add(
BRepBuilderAPI_MakeEdge(gp_Pnt(50., 0., 50.), gp_Pnt(50., 0.,
200.)).Edge())
mkw.Add(
BRepBuilderAPI_MakeEdge(gp_Pnt(50., 0., 200.), gp_Pnt(0., 0.,
200.)).Edge())
mkw.Add(
BRepBuilderAPI_MakeEdge(gp_Pnt(0., 0., 200.), gp_Pnt(0., 0.,
0.)).Edge())
S = BRepPrimAPI_MakePrism(
BRepBuilderAPI_MakeFace(mkw.Wire()).Face(),
gp_Vec(gp_Pnt(0., 0., 0.), gp_Pnt(0., 100., 0.)))
display.EraseAll()
# display.DisplayShape(S.Shape())
W = BRepBuilderAPI_MakeWire(
BRepBuilderAPI_MakeEdge(gp_Pnt(50., 45., 100.), gp_Pnt(100., 45.,
50.)).Edge())
aplane = Geom_Plane(0., 1., 0., -45.)
aform = BRepFeat_MakeLinearForm(S.Shape(), W.Wire(), aplane,
gp_Vec(0., 10., 0.), gp_Vec(0., 0., 0.), 1,
True)
aform.Perform()
display.DisplayShape(aform.Shape())
display.FitAll()
def brepfeat_prism(event=None):
box = BRepPrimAPI_MakeBox(400, 250, 300).Shape()
faces = TopologyExplorer(box).faces()
for i in range(5):
face = next(faces)
srf = BRep_Tool_Surface(face)
c = gp_Circ2d(gp_Ax2d(gp_Pnt2d(200, 130), gp_Dir2d(1, 0)), 75)
circle = Geom2d_Circle(c)
wire = BRepBuilderAPI_MakeWire()
wire.Add(BRepBuilderAPI_MakeEdge(circle, srf, 0., pi).Edge())
wire.Add(BRepBuilderAPI_MakeEdge(circle, srf, pi, 2. * pi).Edge())
wire.Build()
display.DisplayShape(wire.Wire())
mkf = BRepBuilderAPI_MakeFace()
mkf.Init(srf, False, 1e-6)
mkf.Add(wire.Wire())
mkf.Build()
new_face = mkf.Face()
breplib_BuildCurves3d(new_face)
display.DisplayShape(new_face)
prism = BRepFeat_MakeDPrism(box, mkf.Face(), face, 100, True, True)
prism.Perform(400)
assert prism.IsDone()
display.EraseAll()
display.DisplayShape(prism.Shape())
display.DisplayColoredShape(wire.Wire(), 'RED')
display.FitAll()
def revolved_cut(base):
# Define 7 points
face_points = TColgp_Array1OfPnt(1, 7)
face_inner_radius = 0.6
pts = [
gp_Pnt(face_inner_radius - 0.05, 0.0, -0.05),
gp_Pnt(face_inner_radius - 0.10, 0.0, -0.025),
gp_Pnt(face_inner_radius - 0.10, 0.0, 0.025),
gp_Pnt(face_inner_radius + 0.10, 0.0, 0.025),
gp_Pnt(face_inner_radius + 0.10, 0.0, -0.025),
gp_Pnt(face_inner_radius + 0.05, 0.0, -0.05),
gp_Pnt(face_inner_radius - 0.05, 0.0, -0.05),
]
for n, i in enumerate(pts):
face_points.SetValue(n + 1, i)
# Use these points to create edges and add these edges to a wire
hexwire = BRepBuilderAPI_MakeWire()
for i in range(1, 7):
hexedge = BRepBuilderAPI_MakeEdge(face_points.Value(i),
face_points.Value(i + 1)).Edge()
hexwire.Add(hexedge)
# Turn the wire into a 6 sided face
hexface = BRepBuilderAPI_MakeFace(hexwire.Wire()).Face()
# Revolve the face around an axis
revolve_axis = gp_Ax1(gp_Pnt(0, 0, 0), gp_Dir(0, 0, 1))
revolved_shape = BRepPrimAPI_MakeRevol(hexface, revolve_axis).Shape()
# Move the generated shape
move = gp_Trsf()
move.SetTranslation(gp_Pnt(0, 0, 0), gp_Pnt(0, 0, sin(0.5)))
moved_shape = BRepBuilderAPI_Transform(revolved_shape, move, False).Shape()
# Remove the revolved shape
cut = BRepAlgoAPI_Cut(base, moved_shape).Shape()
return cut
def revolved_shape():
""" demonstrate how to create a revolved shape from an edge
adapted from algotopia.com's opencascade_basic tutorial:
http://www.algotopia.com/contents/opencascade/opencascade_basic
"""
face_inner_radius = 0.6
# point to create an edge from
edg_points = [
gp_Pnt(face_inner_radius - 0.05, 0.0, -0.05),
gp_Pnt(face_inner_radius - 0.10, 0.0, -0.025),
gp_Pnt(face_inner_radius - 0.10, 0.0, 0.025),
gp_Pnt(face_inner_radius + 0.10, 0.0, 0.025),
gp_Pnt(face_inner_radius + 0.10, 0.0, -0.025),
gp_Pnt(face_inner_radius + 0.05, 0.0, -0.05),
gp_Pnt(face_inner_radius - 0.05, 0.0, -0.05),
]
# aggregate edges in wire
hexwire = BRepBuilderAPI_MakeWire()
for i in range(6):
hexedge = BRepBuilderAPI_MakeEdge(edg_points[i],
edg_points[i + 1]).Edge()
hexwire.Add(hexedge)
hexwire_wire = hexwire.Wire()
# face from wire
hexface = BRepBuilderAPI_MakeFace(hexwire_wire).Face()
revolve_axis = gp_Ax1(gp_Pnt(0, 0, 0), gp_Dir(0, 0, 1))
# create revolved shape
revolved_shape_ = BRepPrimAPI_MakeRevol(hexface, revolve_axis,
math.radians(90.)).Shape()
# render wire & revolved shape
display.DisplayShape([revolved_shape_, hexwire_wire])
display.FitAll()
start_display()
def _build_solid(compound, divide_closed):
"""
Method to try and build a valid solid from an OpenVSP component.
"""
# Get all the faces in the compound. The surfaces must be split. Discard
# any with zero area.
top_exp = TopExp_Explorer(compound, TopAbs_FACE)
faces = []
while top_exp.More():
shape = top_exp.Current()
face = CheckShape.to_face(shape)
fprop = GProp_GProps()
BRepGProp.SurfaceProperties_(face, fprop, 1.0e-7)
a = fprop.Mass()
if a <= 1.0e-7:
top_exp.Next()
continue
faces.append(face)
top_exp.Next()
# Replace any planar B-Spline surfaces with planes
non_planar_faces = []
planar_faces = []
for f in faces:
hsrf = BRep_Tool.Surface_(f)
try:
is_pln = GeomLib_IsPlanarSurface(hsrf, 1.0e-7)
if is_pln.IsPlanar():
w = ShapeAnalysis.OuterWire_(f)
# Fix the wire because they are usually degenerate edges in
# the planar end caps.
builder = BRepBuilderAPI_MakeWire()
for e in ExploreShape.get_edges(w):
if LinearProps(e).length > 1.0e-7:
builder.Add(e)
w = builder.Wire()
fix = ShapeFix_Wire()
fix.Load(w)
geom_pln = Geom_Plane(is_pln.Plan())
fix.SetSurface(geom_pln)
fix.FixReorder()
fix.FixConnected()
fix.FixEdgeCurves()
fix.FixDegenerated()
w = fix.WireAPIMake()
# Build the planar face
fnew = BRepBuilderAPI_MakeFace(w, True).Face()
planar_faces.append(fnew)
else:
non_planar_faces.append(f)
except RuntimeError:
non_planar_faces.append(f)
# Make a compound of the faces
shape = CreateShape.compound(non_planar_faces + planar_faces)
# Split closed faces
if divide_closed:
divide = ShapeUpgrade_ShapeDivideClosed(shape)
divide.Perform()
shape = divide.Result()
# Sew shape
sew = BRepBuilderAPI_Sewing(1.0e-7)
sew.Load(shape)
sew.Perform()
sewn_shape = sew.SewedShape()
if sewn_shape.ShapeType() == TopAbs_FACE:
face = sewn_shape
sewn_shape = TopoDS_Shell()
builder = BRep_Builder()
builder.MakeShell(sewn_shape)
builder.Add(sewn_shape, face)
# Attempt to unify planar domains
unify_shp = ShapeUpgrade_UnifySameDomain(sewn_shape, False, True, False)
unify_shp.Build()
shape = unify_shp.Shape()
# Make solid
shell = ExploreShape.get_shells(shape)[0]
solid = ShapeFix_Solid().SolidFromShell(shell)
# Limit tolerance
FixShape.limit_tolerance(solid)
# Check shape validity
check_shp = BRepCheck_Analyzer(solid, True)
if check_shp.IsValid():
return solid, True, []
else:
invalid_shapes = _topods_iterator_check(solid, check_shp)
return solid, False, invalid_shapes
def brep_feat_extrusion_protrusion(event=None):
# Extrusion
S = BRepPrimAPI_MakeBox(400., 250., 300.).Shape()
faces = TopologyExplorer(S).faces()
F = next(faces)
surf1 = BRep_Tool_Surface(F)
Pl1 = Geom_Plane.DownCast(surf1)
D1 = Pl1.Pln().Axis().Direction().Reversed()
MW = BRepBuilderAPI_MakeWire()
p1, p2 = gp_Pnt2d(200., -100.), gp_Pnt2d(100., -100.)
aline = GCE2d_MakeLine(p1, p2).Value()
MW.Add(BRepBuilderAPI_MakeEdge(aline, surf1, 0., p1.Distance(p2)).Edge())
p1, p2 = gp_Pnt2d(100., -100.), gp_Pnt2d(100., -200.)
aline = GCE2d_MakeLine(p1, p2).Value()
MW.Add(BRepBuilderAPI_MakeEdge(aline, surf1, 0., p1.Distance(p2)).Edge())
p1, p2 = gp_Pnt2d(100., -200.), gp_Pnt2d(200., -200.)
aline = GCE2d_MakeLine(p1, p2).Value()
MW.Add(BRepBuilderAPI_MakeEdge(aline, surf1, 0., p1.Distance(p2)).Edge())
p1, p2 = gp_Pnt2d(200., -200.), gp_Pnt2d(200., -100.)
aline = GCE2d_MakeLine(p1, p2).Value()
MW.Add(BRepBuilderAPI_MakeEdge(aline, surf1, 0., p1.Distance(p2)).Edge())
MKF = BRepBuilderAPI_MakeFace()
MKF.Init(surf1, False, 1e-6)
MKF.Add(MW.Wire())
FP = MKF.Face()
breplib_BuildCurves3d(FP)
display.EraseAll()
MKP = BRepFeat_MakePrism(S, FP, F, D1, 0, True)
MKP.PerformThruAll()
res1 = MKP.Shape()
display.DisplayShape(res1)
# Protrusion
next(faces)
F2 = next(faces)
surf2 = BRep_Tool_Surface(F2)
Pl2 = Geom_Plane.DownCast(surf2)
D2 = Pl2.Pln().Axis().Direction().Reversed()
MW2 = BRepBuilderAPI_MakeWire()
p1, p2 = gp_Pnt2d(100., 100.), gp_Pnt2d(200., 100.)
aline = GCE2d_MakeLine(p1, p2).Value()
MW2.Add(BRepBuilderAPI_MakeEdge(aline, surf2, 0., p1.Distance(p2)).Edge())
p1, p2 = gp_Pnt2d(200., 100.), gp_Pnt2d(150., 200.)
aline = GCE2d_MakeLine(p1, p2).Value()
MW2.Add(BRepBuilderAPI_MakeEdge(aline, surf2, 0., p1.Distance(p2)).Edge())
p1, p2 = gp_Pnt2d(150., 200.), gp_Pnt2d(100., 100.)
aline = GCE2d_MakeLine(p1, p2).Value()
MW2.Add(BRepBuilderAPI_MakeEdge(aline, surf2, 0., p1.Distance(p2)).Edge())
MKF2 = BRepBuilderAPI_MakeFace()
MKF2.Init(surf2, False, 1e-6)
MKF2.Add(MW2.Wire())
MKF2.Build()
FP = MKF2.Face()
breplib_BuildCurves3d(FP)
MKP2 = BRepFeat_MakePrism(res1, FP, F2, D2, 0, True)
MKP2.PerformThruAll()
display.EraseAll()
trf = gp_Trsf()
trf.SetTranslation(gp_Vec(0, 0, 300))
gtrf = gp_GTrsf()
gtrf.SetTrsf(trf)
tr = BRepBuilderAPI_GTransform(MKP2.Shape(), gtrf, True)
fused = BRepAlgoAPI_Fuse(tr.Shape(), MKP2.Shape())
fused.Build()
display.DisplayShape(fused.Shape())
display.FitAll()
def face():
p1 = gp_Pnt()
p2 = gp_Pnt()
p3 = gp_Pnt()
p4 = gp_Pnt()
p5 = gp_Pnt()
p6 = gp_Pnt()
# The white Face
sphere = gp_Sphere(gp_Ax3(gp_Pnt(0, 0, 0), gp_Dir(1, 0, 0)), 150)
green_face = BRepBuilderAPI_MakeFace(sphere, 0.1, 0.7, 0.2, 0.9)
# The red face
p1.SetCoord(-15, 200, 10)
p2.SetCoord(5, 204, 0)
p3.SetCoord(15, 200, 0)
p4.SetCoord(-15, 20, 15)
p5.SetCoord(-5, 20, 0)
p6.SetCoord(15, 20, 35)
array = TColgp_Array2OfPnt(1, 3, 1, 2)
array.SetValue(1, 1, p1)
array.SetValue(2, 1, p2)
array.SetValue(3, 1, p3)
array.SetValue(1, 2, p4)
array.SetValue(2, 2, p5)
array.SetValue(3, 2, p6)
curve = GeomAPI_PointsToBSplineSurface(array, 3, 8, GeomAbs_C2,
0.001).Surface()
red_face = BRepBuilderAPI_MakeFace(curve, 1e-6)
#The brown face
circle = gp_Circ(gp_Ax2(gp_Pnt(0, 0, 0), gp_Dir(1, 0, 0)), 80)
Edge1 = BRepBuilderAPI_MakeEdge(circle, 0, math.pi)
Edge2 = BRepBuilderAPI_MakeEdge(gp_Pnt(0, 0, -80), gp_Pnt(0, -10, 40))
Edge3 = BRepBuilderAPI_MakeEdge(gp_Pnt(0, -10, 40), gp_Pnt(0, 0, 80))
##TopoDS_Wire YellowWire
MW1 = BRepBuilderAPI_MakeWire(Edge1.Edge(), Edge2.Edge(), Edge3.Edge())
if not MW1.IsDone():
raise AssertionError("MW1 is not done.")
yellow_wire = MW1.Wire()
brown_face = BRepBuilderAPI_MakeFace(yellow_wire)
#The pink face
p1.SetCoord(35, -200, 40)
p2.SetCoord(50, -204, 30)
p3.SetCoord(65, -200, 30)
p4.SetCoord(35, -20, 45)
p5.SetCoord(45, -20, 30)
p6.SetCoord(65, -20, 65)
array2 = TColgp_Array2OfPnt(1, 3, 1, 2)
array2.SetValue(1, 1, p1)
array2.SetValue(2, 1, p2)
array2.SetValue(3, 1, p3)
array2.SetValue(1, 2, p4)
array2.SetValue(2, 2, p5)
array2.SetValue(3, 2, p6)
BSplineSurf = GeomAPI_PointsToBSplineSurface(array2, 3, 8, GeomAbs_C2,
0.001)
aFace = BRepBuilderAPI_MakeFace(BSplineSurf.Surface(), 1e-6).Face()
##
##//2d lines
P12d = gp_Pnt2d(0.9, 0.1)
P22d = gp_Pnt2d(0.2, 0.7)
P32d = gp_Pnt2d(0.02, 0.1)
##
line1 = Geom2d_Line(P12d, gp_Dir2d((0.2 - 0.9), (0.7 - 0.1)))
line2 = Geom2d_Line(P22d, gp_Dir2d((0.02 - 0.2), (0.1 - 0.7)))
line3 = Geom2d_Line(P32d, gp_Dir2d((0.9 - 0.02), (0.1 - 0.1)))
##
##//Edges are on the BSpline surface
Edge1 = BRepBuilderAPI_MakeEdge(line1, BSplineSurf.Surface(), 0,
P12d.Distance(P22d)).Edge()
Edge2 = BRepBuilderAPI_MakeEdge(line2, BSplineSurf.Surface(), 0,
P22d.Distance(P32d)).Edge()
Edge3 = BRepBuilderAPI_MakeEdge(line3, BSplineSurf.Surface(), 0,
P32d.Distance(P12d)).Edge()
##
Wire1 = BRepBuilderAPI_MakeWire(Edge1, Edge2, Edge3).Wire()
Wire1.Reverse()
pink_face = BRepBuilderAPI_MakeFace(aFace, Wire1).Face()
breplib_BuildCurves3d(pink_face)
display.DisplayColoredShape(green_face.Face(), 'GREEN')
display.DisplayColoredShape(red_face.Face(), 'RED')
display.DisplayColoredShape(pink_face, Quantity_Color(Quantity_NOC_PINK))
display.DisplayColoredShape(brown_face.Face(), 'BLUE')
display.DisplayColoredShape(yellow_wire, 'YELLOW', update=True)
def build_tooth():
base_center = gp_Pnt2d(pitch_circle_radius + (tooth_radius - roller_radius), 0)
base_circle = gp_Circ2d(gp_Ax2d(base_center, gp_Dir2d()), tooth_radius)
trimmed_base = GCE2d_MakeArcOfCircle(base_circle,
M_PI - (roller_contact_angle / 2.),
M_PI).Value()
trimmed_base.Reverse() # just a trick
p0 = trimmed_base.StartPoint()
p1 = trimmed_base.EndPoint()
# Determine the center of the profile circle
x_distance = cos(roller_contact_angle / 2.) * (profile_radius + tooth_radius)
y_distance = sin(roller_contact_angle / 2.) * (profile_radius + tooth_radius)
profile_center = gp_Pnt2d(pitch_circle_radius - x_distance, y_distance)
# Construct the profile circle gp_Circ2d
profile_circle = gp_Circ2d(gp_Ax2d(profile_center, gp_Dir2d()),
profile_center.Distance(p1))
geom_profile_circle = GCE2d_MakeCircle(profile_circle).Value()
# Construct the outer circle gp_Circ2d
outer_circle = gp_Circ2d(gp_Ax2d(gp_Pnt2d(0, 0), gp_Dir2d()), top_radius)
geom_outer_circle = GCE2d_MakeCircle(outer_circle).Value()
inter = Geom2dAPI_InterCurveCurve(geom_profile_circle, geom_outer_circle)
num_points = inter.NbPoints()
assert isinstance(p1, gp_Pnt2d)
if num_points == 2:
if p1.Distance(inter.Point(1)) < p1.Distance(inter.Point(2)):
p2 = inter.Point(1)
else:
p2 = inter.Point(2)
elif num_points == 1:
p2 = inter.Point(1)
else:
sys.exit(-1)
# Trim the profile circle and mirror
trimmed_profile = GCE2d_MakeArcOfCircle(profile_circle, p1, p2).Value()
# Calculate the outermost point
p3 = gp_Pnt2d(cos(tooth_angle / 2.) * top_radius,
sin(tooth_angle / 2.) * top_radius)
# and use it to create the third arc
trimmed_outer = GCE2d_MakeArcOfCircle(outer_circle, p2, p3).Value()
# Mirror and reverse the three arcs
mirror_axis = gp_Ax2d(gp_Origin2d(), gp_DX2d().Rotated(tooth_angle / 2.))
mirror_base = Geom2d_TrimmedCurve.DownCast(trimmed_base.Copy())
mirror_profile = Geom2d_TrimmedCurve.DownCast(trimmed_profile.Copy())
mirror_outer = Geom2d_TrimmedCurve.DownCast(trimmed_outer.Copy())
mirror_base.Mirror(mirror_axis)
mirror_profile.Mirror(mirror_axis)
mirror_outer.Mirror(mirror_axis)
mirror_base.Reverse()
mirror_profile.Reverse()
mirror_outer.Reverse()
# Replace the two outer arcs with a single one
outer_start = trimmed_outer.StartPoint()
outer_mid = trimmed_outer.EndPoint()
outer_end = mirror_outer.EndPoint()
outer_arc = GCE2d_MakeArcOfCircle(outer_start, outer_mid, outer_end).Value()
# Create an arc for the inside of the wedge
inner_circle = gp_Circ2d(gp_Ax2d(gp_Pnt2d(0, 0), gp_Dir2d()),
top_radius - roller_diameter)
inner_start = gp_Pnt2d(top_radius - roller_diameter, 0)
inner_arc = GCE2d_MakeArcOfCircle(inner_circle, inner_start, tooth_angle).Value()
inner_arc.Reverse()
# Convert the 2D arcs and two extra lines to 3D edges
plane = gp_Pln(gp_Origin(), gp_DZ())
arc1 = BRepBuilderAPI_MakeEdge(geomapi_To3d(trimmed_base, plane)).Edge()
arc2 = BRepBuilderAPI_MakeEdge(geomapi_To3d(trimmed_profile, plane)).Edge()
arc3 = BRepBuilderAPI_MakeEdge(geomapi_To3d(outer_arc, plane)).Edge()
arc4 = BRepBuilderAPI_MakeEdge(geomapi_To3d(mirror_profile, plane)).Edge()
arc5 = BRepBuilderAPI_MakeEdge(geomapi_To3d(mirror_base, plane)).Edge()
p4 = mirror_base.EndPoint()
p5 = inner_arc.StartPoint()
lin1 = BRepBuilderAPI_MakeEdge(gp_Pnt(p4.X(), p4.Y(), 0),
gp_Pnt(p5.X(), p5.Y(), 0)).Edge()
arc6 = BRepBuilderAPI_MakeEdge(geomapi_To3d(inner_arc, plane)).Edge()
p6 = inner_arc.EndPoint()
lin2 = BRepBuilderAPI_MakeEdge(gp_Pnt(p6.X(), p6.Y(), 0),
gp_Pnt(p0.X(), p0.Y(), 0)).Edge()
wire = BRepBuilderAPI_MakeWire(arc1)
wire.Add(arc2)
wire.Add(arc3)
wire.Add(arc4)
wire.Add(arc5)
wire.Add(lin1)
wire.Add(arc6)
wire.Add(lin2)
face = BRepBuilderAPI_MakeFace(wire.Wire())
wedge = BRepPrimAPI_MakePrism(face.Shape(), gp_Vec(0.0, 0.0, thickness))
return wedge.Shape()
def cut_out(base):
outer = gp_Circ2d(gp_OX2d(), top_radius - 1.75 * roller_diameter)
inner = gp_Circ2d(gp_OX2d(), center_radius + 0.75 * roller_diameter)
geom_outer = GCE2d_MakeCircle(outer).Value()
geom_inner = GCE2d_MakeCircle(inner).Value()
geom_inner.Reverse()
base_angle = (2. * M_PI) / mounting_hole_count
hole_angle = atan(hole_radius / mounting_radius)
correction_angle = 3 * hole_angle
left = gp_Lin2d(gp_Origin2d(), gp_DX2d())
right = gp_Lin2d(gp_Origin2d(), gp_DX2d())
left.Rotate(gp_Origin2d(), correction_angle)
right.Rotate(gp_Origin2d(), base_angle - correction_angle)
geom_left = GCE2d_MakeLine(left).Value()
geom_right = GCE2d_MakeLine(right).Value()
inter_1 = Geom2dAPI_InterCurveCurve(geom_outer, geom_left)
inter_2 = Geom2dAPI_InterCurveCurve(geom_outer, geom_right)
inter_3 = Geom2dAPI_InterCurveCurve(geom_inner, geom_right)
inter_4 = Geom2dAPI_InterCurveCurve(geom_inner, geom_left)
if inter_1.Point(1).X() > 0:
p1 = inter_1.Point(1)
else:
p1 = inter_1.Point(2)
if inter_2.Point(1).X() > 0:
p2 = inter_2.Point(1)
else:
p2 = inter_2.Point(2)
if inter_3.Point(1).X() > 0:
p3 = inter_3.Point(1)
else:
p3 = inter_3.Point(2)
if inter_4.Point(1).X() > 0:
p4 = inter_4.Point(1)
else:
p4 = inter_4.Point(2)
trimmed_outer = GCE2d_MakeArcOfCircle(outer, p1, p2).Value()
trimmed_inner = GCE2d_MakeArcOfCircle(inner, p4, p3).Value()
plane = gp_Pln(gp_Origin(), gp_DZ())
arc1 = BRepBuilderAPI_MakeEdge(geomapi_To3d(trimmed_outer, plane)).Edge()
lin1 = BRepBuilderAPI_MakeEdge(gp_Pnt(p2.X(), p2.Y(), 0),
gp_Pnt(p3.X(), p3.Y(), 0)).Edge()
arc2 = BRepBuilderAPI_MakeEdge(geomapi_To3d(trimmed_inner, plane)).Edge()
lin2 = BRepBuilderAPI_MakeEdge(gp_Pnt(p4.X(), p4.Y(), 0),
gp_Pnt(p1.X(), p1.Y(), 0)).Edge()
cutout_wire = BRepBuilderAPI_MakeWire(arc1)
cutout_wire.Add(lin1)
cutout_wire.Add(arc2)
cutout_wire.Add(lin2)
# Turn the wire into a face
cutout_face = BRepBuilderAPI_MakeFace(cutout_wire.Wire())
filleted_face = BRepFilletAPI_MakeFillet2d(cutout_face.Face())
explorer = BRepTools_WireExplorer(cutout_wire.Wire())
while explorer.More():
vertex = explorer.CurrentVertex()
filleted_face.AddFillet(vertex, roller_radius)
explorer.Next()
cutout = BRepPrimAPI_MakePrism(filleted_face.Shape(),
gp_Vec(0.0, 0.0, thickness)).Shape()
result = base
rotate = gp_Trsf()
for i in range(0, mounting_hole_count):
rotate.SetRotation(gp_OZ(), i * 2. * M_PI / mounting_hole_count)
rotated_cutout = BRepBuilderAPI_Transform(cutout, rotate, True)
result = BRepAlgoAPI_Cut(result,
rotated_cutout.Shape()).Shape()
return result
def create_shape(self):
d = self.declaration
t = self.get_transform()
w, h = d.width, d.height
if d.rx or d.ry:
rx, ry = d.rx, d.ry
if not ry:
ry = rx
elif not rx:
rx = ry
# Clamp to the valid range
rx = min(w / 2, rx)
ry = min(h / 2, ry)
# Bottom
p1 = gp_Pnt(0 + rx, 0, 0)
p2 = gp_Pnt(0 + w - rx, 0, 0)
# Right
p3 = gp_Pnt(w, ry, 0)
p4 = gp_Pnt(w, h - ry, 0)
# Top
p5 = gp_Pnt(w - rx, h, 0)
p6 = gp_Pnt(rx, h, 0)
# Left
p7 = gp_Pnt(0, h - ry, 0)
p8 = gp_Pnt(0, ry, 0)
shape = BRepBuilderAPI_MakeWire()
e = d.tolerance
# Bottom
if not p1.IsEqual(p2, e):
shape.Add(BRepBuilderAPI_MakeEdge(p1, p2).Edge())
# Arc bottom right
c = make_ellipse((w - rx, ry, 0), rx, ry)
shape.Add(
BRepBuilderAPI_MakeEdge(
GC_MakeArcOfEllipse(c, p2, p3, False).Value()).Edge())
# Right
if not p3.IsEqual(p4, e):
shape.Add(BRepBuilderAPI_MakeEdge(p3, p4).Edge())
# Arc top right
c.SetLocation(gp_Pnt(w - rx, h - ry, 0))
shape.Add(
BRepBuilderAPI_MakeEdge(
GC_MakeArcOfEllipse(c, p4, p5, False).Value()).Edge())
# Top
if not p5.IsEqual(p6, e):
shape.Add(BRepBuilderAPI_MakeEdge(p5, p6).Edge())
# Arc top left
c.SetLocation(gp_Pnt(rx, h - ry, 0))
shape.Add(
BRepBuilderAPI_MakeEdge(
GC_MakeArcOfEllipse(c, p6, p7, False).Value()).Edge())
# Left
if not p7.IsEqual(p8, e):
shape.Add(BRepBuilderAPI_MakeEdge(p7, p8).Edge())
# Arc bottom left
c.SetLocation(gp_Pnt(rx, ry, 0))
shape.Add(
BRepBuilderAPI_MakeEdge(
GC_MakeArcOfEllipse(c, p8, p1, False).Value()).Edge())
shape = shape.Wire()
shape.Closed(True)
else:
shape = BRepBuilderAPI_MakePolygon(gp_Pnt(0, 0,
0), gp_Pnt(w, 0, 0),
gp_Pnt(w, h, 0),
gp_Pnt(0, h, 0), True).Wire()
wire = TopoDS.Wire_(BRepBuilderAPI_Transform(shape, t, False).Shape())
self.curve = BRepAdaptor_CompCurve(wire)
self.shape = wire
aEdge1 = BRepBuilderAPI_MakeEdge(aSegment1.Value()) aEdge2 = BRepBuilderAPI_MakeEdge(aArcOfCircle.Value()) aEdge3 = BRepBuilderAPI_MakeEdge(aSegment2.Value()) # Create a wire out of the edges aWire = BRepBuilderAPI_MakeWire(aEdge1.Edge(), aEdge2.Edge(), aEdge3.Edge()) # Quick way to specify the X axis xAxis = gp_OX() # Set up the mirror aTrsf = gp_Trsf() aTrsf.SetMirror(xAxis) # Apply the mirror transformation aBRespTrsf = BRepBuilderAPI_Transform(aWire.Wire(), aTrsf) # Get the mirrored shape back out of the transformation and convert back to a wire aMirroredShape = aBRespTrsf.Shape() # A wire instead of a generic shape now aMirroredWire = topods.Wire(aMirroredShape) # Combine the two constituent wires mkWire = BRepBuilderAPI_MakeWire() mkWire.Add(aWire.Wire()) mkWire.Add(aMirroredWire) myWireProfile = mkWire.Wire() # The face that we'll sweep to make the prism myFaceProfile = BRepBuilderAPI_MakeFace(myWireProfile)
def _build_solid(compound, divide_closed):
"""
Try to build a solid from the OpenVSP compound of faces.
:param afem.topology.entities.Compound compound: The compound.
:param bool divide_closed: Option to divide closed faces.
:return: The solid.
:rtype: afem.topology.entities.Solid
"""
# Get all the faces in the compound. The surfaces must be split. Discard
# any with zero area.
faces = []
for face in compound.faces:
area = SurfaceProps(face).area
if area > 1.0e-7:
faces.append(face)
# Replace any planar B-Spline surfaces with planes.
non_planar_faces = []
planar_faces = []
for f in faces:
srf = f.surface
try:
pln = srf.as_plane()
if pln:
w = f.outer_wire
# Fix the wire because they are usually degenerate edges in
# the planar end caps.
builder = BRepBuilderAPI_MakeWire()
for e in w.edges:
if LinearProps(e).length > 1.0e-7:
builder.Add(e.object)
w = builder.Wire()
fix = ShapeFix_Wire()
fix.Load(w)
fix.SetSurface(pln.object)
fix.FixReorder()
fix.FixConnected()
fix.FixEdgeCurves()
fix.FixDegenerated()
w = Wire(fix.WireAPIMake())
fnew = Face.by_wire(w)
planar_faces.append(fnew)
else:
non_planar_faces.append(f)
except RuntimeError:
logger.info('Failed to check for planar face...')
non_planar_faces.append(f)
# Make a compound of the faces
shape = Compound.by_shapes(non_planar_faces + planar_faces)
# Split closed faces
if divide_closed:
shape = DivideClosedShape(shape).shape
# Sew shape
sewn_shape = SewShape(shape).sewed_shape
if isinstance(sewn_shape, Face):
sewn_shape = sewn_shape.to_shell()
# Attempt to unify planar domains
shell = UnifyShape(sewn_shape).shape
# Make solid
if not isinstance(shell, Shell):
logger.info('\tA valid shell was not able to be generated.')
check = CheckShape(shell)
if not check.is_valid:
logger.info('\tShape errors:')
check.log_errors()
return shell, check.invalid_shapes
solid = Solid.by_shell(shell)
# Limit tolerance
FixShape.limit_tolerance(solid)
# Check the solid and attempt to fix
invalid = []
check = CheckShape(solid)
if not check.is_valid:
logger.info('\tFixing the solid...')
solid = FixShape(solid).shape
check = CheckShape(solid)
if not check.is_valid:
logger.info('\t...solid could not be fixed.')
logger.info('\tShape errors:')
check.log_errors()
failed = check.invalid_shapes
invalid += failed
else:
tol = solid.tol_avg
logger.info(
'\tSuccessfully generated solid with tolerance={}'.format(tol))
return solid, invalid
def round_tooth(wedge):
round_x = 2.6
round_z = 0.06 * pitch
round_radius = pitch
# Determine where the circle used for rounding has to start and stop
p2d_1 = gp_Pnt2d(top_radius - round_x, 0)
p2d_2 = gp_Pnt2d(top_radius, round_z)
# Construct the rounding circle
round_circle = GccAna_Circ2d2TanRad(p2d_1, p2d_2, round_radius, 0.01)
if (round_circle.NbSolutions() != 2):
sys.exit(-2)
round_circle_2d_1 = round_circle.ThisSolution(1)
round_circle_2d_2 = round_circle.ThisSolution(2)
if (round_circle_2d_1.Position().Location().Coord()[1] >= 0):
round_circle_2d = round_circle_2d_1
else:
round_circle_2d = round_circle_2d_2
# Remove the arc used for rounding
trimmed_circle = GCE2d_MakeArcOfCircle(round_circle_2d, p2d_1, p2d_2).Value()
# Calculate extra points used to construct lines
p1 = gp_Pnt(p2d_1.X(), 0, p2d_1.Y())
p2 = gp_Pnt(p2d_2.X(), 0, p2d_2.Y())
p3 = gp_Pnt(p2d_2.X() + 1, 0, p2d_2.Y())
p4 = gp_Pnt(p2d_2.X() + 1, 0, p2d_1.Y() - 1)
p5 = gp_Pnt(p2d_1.X(), 0, p2d_1.Y() - 1)
# Convert the arc and four extra lines into 3D edges
plane = gp_Pln(gp_Ax3(gp_Origin(), gp_DY().Reversed(), gp_DX()))
arc1 = BRepBuilderAPI_MakeEdge(geomapi_To3d(trimmed_circle, plane)).Edge()
lin1 = BRepBuilderAPI_MakeEdge(p2, p3).Edge()
lin2 = BRepBuilderAPI_MakeEdge(p3, p4).Edge()
lin3 = BRepBuilderAPI_MakeEdge(p4, p5).Edge()
lin4 = BRepBuilderAPI_MakeEdge(p5, p1).Edge()
# Make a wire composed of the edges
round_wire = BRepBuilderAPI_MakeWire(arc1)
round_wire.Add(lin1)
round_wire.Add(lin2)
round_wire.Add(lin3)
round_wire.Add(lin4)
# Turn the wire into a face
round_face = BRepBuilderAPI_MakeFace(round_wire.Wire()).Shape()
# Revolve the face around the Z axis over the tooth angle
rounding_cut_1 = BRepPrimAPI_MakeRevol(round_face, gp_OZ(), tooth_angle).Shape()
# Construct a mirrored copy of the first cutting shape
mirror = gp_Trsf()
mirror.SetMirror(gp_XOY())
mirrored_cut_1 = BRepBuilderAPI_Transform(rounding_cut_1, mirror, True).Shape()
# and translate it so that it ends up on the other side of the wedge
translate = gp_Trsf()
translate.SetTranslation(gp_Vec(0, 0, thickness))
rounding_cut_2 = BRepBuilderAPI_Transform(mirrored_cut_1, translate, False).Shape()
# Cut the wedge using the first and second cutting shape
cut_1 = BRepAlgoAPI_Cut(wedge, rounding_cut_1).Shape()
cut_2 = BRepAlgoAPI_Cut(cut_1, rounding_cut_2).Shape()
return cut_2
