Exemplo n.º 1
0
    def __init__(self, obj, base, templateFile = None):
        self.obj = obj
        obj.addProperty("App::PropertyFile", "PostProcessorOutputFile", "Output", QtCore.QT_TRANSLATE_NOOP("App::Property","The NC output file for this project"))
        obj.addProperty("App::PropertyEnumeration", "PostProcessor", "Output", QtCore.QT_TRANSLATE_NOOP("App::Property","Select the Post Processor"))
        obj.addProperty("App::PropertyString", "PostProcessorArgs", "Output", QtCore.QT_TRANSLATE_NOOP("App::Property", "Arguments for the Post Processor (specific to the script)"))

        obj.addProperty("App::PropertyString", "Description", "Path", QtCore.QT_TRANSLATE_NOOP("App::Property","An optional description for this job"))
        obj.addProperty("App::PropertyDistance", "GeometryTolerance", "Geometry", QtCore.QT_TRANSLATE_NOOP("App::Property", "For computing Paths; smaller increases accuracy, but slows down computation"))

        obj.addProperty("App::PropertyLink", "Base", "Base", QtCore.QT_TRANSLATE_NOOP("PathJob", "The base object for all operations"))
        obj.addProperty("App::PropertyLink", "Stock", "Base", QtCore.QT_TRANSLATE_NOOP("PathJob", "Solid object to be used as stock."))
        obj.addProperty("App::PropertyLink", "Operations", "Base", QtCore.QT_TRANSLATE_NOOP("PathJob", "Compound path of all operations in the order they are processed."))
        obj.addProperty("App::PropertyLinkList", "ToolController", "Base", QtCore.QT_TRANSLATE_NOOP("PathJob", "Collection of tool controllers available for this job."))

        obj.PostProcessorOutputFile = PathPreferences.defaultOutputFile()
        #obj.setEditorMode("PostProcessorOutputFile", 0)  # set to default mode
        obj.PostProcessor = postProcessors = PathPreferences.allEnabledPostProcessors()
        defaultPostProcessor = PathPreferences.defaultPostProcessor()
        # Check to see if default post processor hasn't been 'lost' (This can happen when Macro dir has changed)
        if defaultPostProcessor in postProcessors:
            obj.PostProcessor = defaultPostProcessor
        else:
            obj.PostProcessor = postProcessors[0]
        obj.PostProcessorArgs = PathPreferences.defaultPostProcessorArgs()
        obj.GeometryTolerance = PathPreferences.defaultGeometryTolerance()

        ops = FreeCAD.ActiveDocument.addObject("Path::FeatureCompoundPython", "Operations")
        obj.Operations = ops
        obj.setEditorMode('Operations', 2) # hide
        obj.setEditorMode('Placement', 2)

        self.setupSetupSheet(obj)

        obj.Base = createResourceClone(obj, base, 'Base', 'BaseGeometry')
        obj.Proxy = self

        self.setFromTemplateFile(obj, templateFile)
        if not obj.Stock:
            stockTemplate = PathPreferences.defaultStockTemplate()
            if stockTemplate:
                obj.Stock = PathStock.CreateFromTemplate(obj, json.loads(stockTemplate))
            if not obj.Stock:
                obj.Stock = PathStock.CreateFromBase(obj)
        if obj.Stock.ViewObject:
            obj.Stock.ViewObject.Visibility = False
Exemplo n.º 2
0
    def loadStockSettings(self):
        stock = PathPreferences.defaultStockTemplate()
        index = -1
        if stock:
            attrs = json.loads(stock)
            if attrs.get('version') and 1 == int(attrs['version']):
                stockType = attrs.get('create')
                if stockType == PathStock.StockType.FromBase:
                    index = 2
                elif stockType == PathStock.StockType.CreateBox:
                    index = 0
                elif stockType == PathStock.StockType.CreateCylinder:
                    index = 1
                else:
                    index = -1
        if -1 == index:
            attrs = {}
            self.form.stockGroup.setChecked(False)
        else:
            self.form.stockGroup.setChecked(True)
            self.form.stock.setCurrentIndex(index)

        # this either sets the default value or the value from the template for each field
        self.form.stockExtXneg.setText(attrs.get('xneg', '1 mm'))
        self.form.stockExtXpos.setText(attrs.get('xpos', '1 mm'))
        self.form.stockExtYneg.setText(attrs.get('yneg', '1 mm'))
        self.form.stockExtYpos.setText(attrs.get('ypos', '1 mm'))
        self.form.stockExtZneg.setText(attrs.get('zneg', '1 mm'))
        self.form.stockExtZpos.setText(attrs.get('zpos', '1 mm'))
        self.form.stockBoxLength.setText(attrs.get('length', '10 mm'))
        self.form.stockBoxWidth.setText(attrs.get('width', '10 mm'))
        self.form.stockBoxHeight.setText(attrs.get('height', '10 mm'))
        self.form.stockCylinderRadius.setText(attrs.get('radius', '5 mm'))
        self.form.stockCylinderHeight.setText(attrs.get('height', '10 mm'))

        posX = attrs.get('posX')
        posY = attrs.get('posY')
        posZ = attrs.get('posZ')
        rotX = attrs.get('rotX')
        rotY = attrs.get('rotY')
        rotZ = attrs.get('rotZ')
        rotW = attrs.get('rotW')
        if posX is not None and posY is not None and posZ is not None and rotX is not None and rotY is not None and rotZ is not None and rotW is not None:
            pos = FreeCAD.Vector(float(posX), float(posY), float(posZ)) 
            rot = FreeCAD.Rotation(float(rotX), float(rotY), float(rotZ), float(rotW))
            placement = FreeCAD.Placement(pos, rot)
            self.form.stockPlacementGroup.setChecked(True)
        else:
            placement = FreeCAD.Placement()
            self.form.stockPlacementGroup.setChecked(False)

        self.form.stockAngle.setText(FreeCAD.Units.Quantity("%f rad" % placement.Rotation.Angle).UserString)
        self.form.stockAxisX.setValue(placement.Rotation.Axis.x)
        self.form.stockAxisY.setValue(placement.Rotation.Axis.y)
        self.form.stockAxisZ.setValue(placement.Rotation.Axis.z)
        self.form.stockPositionX.setText(FreeCAD.Units.Quantity(placement.Base.x, FreeCAD.Units.Length).UserString)
        self.form.stockPositionY.setText(FreeCAD.Units.Quantity(placement.Base.y, FreeCAD.Units.Length).UserString)
        self.form.stockPositionZ.setText(FreeCAD.Units.Quantity(placement.Base.z, FreeCAD.Units.Length).UserString)

        self.setupStock(index)
        self.form.stock.currentIndexChanged.connect(self.setupStock)
Exemplo n.º 3
0
    def loadStockSettings(self):
        stock = PathPreferences.defaultStockTemplate()
        index = -1
        if stock:
            attrs = json.loads(stock)
            if attrs.get('version') and 1 == int(attrs['version']):
                stockType = attrs.get('create')
                if stockType == PathStock.StockType.FromBase:
                    index = 2
                elif stockType == PathStock.StockType.CreateBox:
                    index = 0
                elif stockType == PathStock.StockType.CreateCylinder:
                    index = 1
                else:
                    index = -1
        if -1 == index:
            attrs = {}
            self.form.stockGroup.setChecked(False)
        else:
            self.form.stockGroup.setChecked(True)
            self.form.stock.setCurrentIndex(index)

        # this either sets the default value or the value from the template for each field
        self.form.stockExtXneg.setText(attrs.get('xneg', '1 mm'))
        self.form.stockExtXpos.setText(attrs.get('xpos', '1 mm'))
        self.form.stockExtYneg.setText(attrs.get('yneg', '1 mm'))
        self.form.stockExtYpos.setText(attrs.get('ypos', '1 mm'))
        self.form.stockExtZneg.setText(attrs.get('zneg', '1 mm'))
        self.form.stockExtZpos.setText(attrs.get('zpos', '1 mm'))
        self.form.stockBoxLength.setText(attrs.get('length', '10 mm'))
        self.form.stockBoxWidth.setText(attrs.get('width', '10 mm'))
        self.form.stockBoxHeight.setText(attrs.get('height', '10 mm'))
        self.form.stockCylinderRadius.setText(attrs.get('radius', '5 mm'))
        self.form.stockCylinderHeight.setText(attrs.get('height', '10 mm'))

        posX = attrs.get('posX')
        posY = attrs.get('posY')
        posZ = attrs.get('posZ')
        rotX = attrs.get('rotX')
        rotY = attrs.get('rotY')
        rotZ = attrs.get('rotZ')
        rotW = attrs.get('rotW')
        if posX is not None and posY is not None and posZ is not None and rotX is not None and rotY is not None and rotZ is not None and rotW is not None:
            pos = FreeCAD.Vector(float(posX), float(posY), float(posZ))
            rot = FreeCAD.Rotation(float(rotX), float(rotY), float(rotZ),
                                   float(rotW))
            placement = FreeCAD.Placement(pos, rot)
            self.form.stockPlacementGroup.setChecked(True)
        else:
            placement = FreeCAD.Placement()
            self.form.stockPlacementGroup.setChecked(False)

        self.form.stockAngle.setText(
            FreeCAD.Units.Quantity("%f rad" %
                                   placement.Rotation.Angle).UserString)
        self.form.stockAxisX.setValue(placement.Rotation.Axis.x)
        self.form.stockAxisY.setValue(placement.Rotation.Axis.y)
        self.form.stockAxisZ.setValue(placement.Rotation.Axis.z)
        self.form.stockPositionX.setText(
            FreeCAD.Units.Quantity(placement.Base.x,
                                   FreeCAD.Units.Length).UserString)
        self.form.stockPositionY.setText(
            FreeCAD.Units.Quantity(placement.Base.y,
                                   FreeCAD.Units.Length).UserString)
        self.form.stockPositionZ.setText(
            FreeCAD.Units.Quantity(placement.Base.z,
                                   FreeCAD.Units.Length).UserString)

        self.setupStock(index)
        self.form.stock.currentIndexChanged.connect(self.setupStock)