def test00(self):
'''Verify ToolController templateAttrs'''
t = self.createTool('T1')
tc = PathToolController.Create('TC0', t)
tc.Label = 'ToolController'
tc.ToolNumber = 7
tc.VertFeed = '3 in/s'
tc.VertFeed = round(tc.VertFeed, 1)
tc.HorizFeed = '10 mm/s'
tc.VertRapid = 40
tc.HorizRapid = 28
tc.SpindleDir = 'Reverse'
tc.SpindleSpeed = 12000
attrs = tc.Proxy.templateAttrs(tc)
self.assertEqual(attrs['name'], 'TC0')
self.assertEqual(attrs['label'], 'ToolController')
self.assertEqual(attrs['nr'], 7)
self.assertEqual(attrs['vfeed'], '76.2 mm/s')
self.assertEqual(attrs['hfeed'], '10.0 mm/s')
self.assertEqual(attrs['vrapid'], '40.0 mm/s')
self.assertEqual(attrs['hrapid'], '28.0 mm/s')
self.assertEqual(attrs['dir'], 'Reverse')
self.assertEqual(attrs['speed'], 12000)
if PathPreferences.toolsReallyUseLegacyTools():
self.assertEqual(attrs['tool'], t.templateAttrs())
else:
self.assertEqual(attrs['tool'], t.Proxy.templateAttrs(t))
return tc
def Create(name='TC: Default Tool', tool=None, toolNumber=1, assignViewProvider=True):
legacyTool = PathPreferences.toolsReallyUseLegacyTools() if tool is None else isinstance(tool, Path.Tool)
PathLog.track(tool, toolNumber, legacyTool)
obj = FreeCAD.ActiveDocument.addObject("Path::FeaturePython", name)
obj.Label = name
obj.Proxy = ToolController(obj, legacyTool)
if FreeCAD.GuiUp and assignViewProvider:
ViewProvider(obj.ViewObject)
if tool is None:
if legacyTool:
tool = Path.Tool()
tool.Diameter = 5.0
tool.Name = "Default Tool"
tool.CuttingEdgeHeight = 15.0
tool.ToolType = "EndMill"
tool.Material = "HighSpeedSteel"
else:
tool = PathToolBit.Factory.Create()
if tool.ViewObject:
tool.ViewObject.Visibility = False
obj.Tool = tool
obj.ToolNumber = toolNumber
return obj
def edit(self, job=None, cb=None):
if PathPreferences.toolsReallyUseLegacyTools():
editor = EditorPanel(job, cb)
editor.setupUi()
editor.form.exec_()
else:
if PathToolBitLibraryCmd.CommandToolBitLibraryLoad.Execute(job):
if cb:
cb()
def createTool(self, name='t1', diameter=1.75):
if PathPreferences.toolsReallyUseLegacyTools():
return Path.Tool(name=name, diameter=diameter)
attrs = {
'shape': None,
'name': name,
'parameter': {
'Diameter': diameter
},
'attribute': []
}
return PathToolBit.Factory.CreateFromAttrs(attrs, name)
def Initialize(self):
global PathCommandGroup
# Add preferences pages - before loading PathGui to properly order pages of Path group
from PathScripts import PathPreferencesPathJob, PathPreferencesPathDressup
FreeCADGui.addPreferencePage(PathPreferencesPathJob.JobPreferencesPage,
"Path")
FreeCADGui.addPreferencePage(
PathPreferencesPathDressup.DressupPreferencesPage, "Path")
# Check enablement of experimental features
from PathScripts import PathPreferences
# load the builtin modules
import Path
import PathScripts
import PathGui
from PySide import QtCore, QtGui
FreeCADGui.addLanguagePath(":/translations")
FreeCADGui.addIconPath(":/icons")
from PathScripts import PathGuiInit
from PathScripts import PathJobCmd
from PathScripts import PathToolBitCmd
from PathScripts import PathToolBitLibraryCmd
import PathCommands
PathGuiInit.Startup()
# build commands list
projcmdlist = ["Path_Job", "Path_Post"]
toolcmdlist = [
"Path_Inspect", "Path_Simulator", "Path_SelectLoop",
"Path_OpActiveToggle"
]
prepcmdlist = [
"Path_Fixture", "Path_Comment", "Path_Stop", "Path_Custom",
"Path_Probe"
]
twodopcmdlist = [
"Path_Profile", "Path_Pocket_Shape", "Path_Drilling",
"Path_MillFace", "Path_Helix", "Path_Adaptive", "Path_Slot"
]
threedopcmdlist = ["Path_Pocket_3D"]
engravecmdlist = ["Path_Engrave", "Path_Deburr", "Path_Vcarve"]
modcmdlist = ["Path_OperationCopy", "Path_Array", "Path_SimpleCopy"]
dressupcmdlist = [
"Path_DressupAxisMap", "Path_DressupPathBoundary",
"Path_DressupDogbone", "Path_DressupDragKnife",
"Path_DressupLeadInOut", "Path_DressupRampEntry",
"Path_DressupTag", "Path_DressupZCorrect"
]
extracmdlist = []
# modcmdmore = ["Path_Hop",]
# remotecmdlist = ["Path_Remote"]
specialcmdlist = []
if PathPreferences.toolsReallyUseLegacyTools():
toolcmdlist.append("Path_ToolLibraryEdit")
toolbitcmdlist = []
else:
toolcmdlist.extend(PathToolBitLibraryCmd.BarList)
toolbitcmdlist = PathToolBitLibraryCmd.MenuList
engravecmdgroup = ['Path_EngraveTools']
FreeCADGui.addCommand(
'Path_EngraveTools',
PathCommandGroup(
engravecmdlist,
QtCore.QT_TRANSLATE_NOOP("Path", 'Engraving Operations')))
threedcmdgroup = threedopcmdlist
if PathPreferences.experimentalFeaturesEnabled():
projcmdlist.append("Path_Sanity")
prepcmdlist.append("Path_Shape")
extracmdlist.extend(["Path_Area", "Path_Area_Workplane"])
specialcmdlist.append('Path_Thread_Milling')
try:
import ocl # pylint: disable=unused-variable
from PathScripts import PathSurfaceGui
from PathScripts import PathWaterlineGui
threedopcmdlist.extend(["Path_Surface", "Path_Waterline"])
threedcmdgroup = ['Path_3dTools']
FreeCADGui.addCommand(
'Path_3dTools',
PathCommandGroup(
threedopcmdlist,
QtCore.QT_TRANSLATE_NOOP("Path", '3D Operations')))
except ImportError:
if not PathPreferences.suppressOpenCamLibWarning():
FreeCAD.Console.PrintError("OpenCamLib is not working!\n")
self.appendToolbar(QtCore.QT_TRANSLATE_NOOP("Path", "Project Setup"),
projcmdlist)
self.appendToolbar(QtCore.QT_TRANSLATE_NOOP("Path", "Tool Commands"),
toolcmdlist)
self.appendToolbar(QtCore.QT_TRANSLATE_NOOP("Path", "New Operations"),
twodopcmdlist + engravecmdgroup + threedcmdgroup)
self.appendToolbar(
QtCore.QT_TRANSLATE_NOOP("Path", "Path Modification"), modcmdlist)
if extracmdlist:
self.appendToolbar(
QtCore.QT_TRANSLATE_NOOP("Path", "Helpful Tools"),
extracmdlist)
self.appendMenu([QtCore.QT_TRANSLATE_NOOP("Path", "&Path")],
projcmdlist + ["Path_ExportTemplate", "Separator"] +
toolcmdlist + toolbitcmdlist + ["Separator"] +
twodopcmdlist + engravecmdlist + ["Separator"] +
threedopcmdlist + ["Separator"])
self.appendMenu([
QtCore.QT_TRANSLATE_NOOP("Path", "&Path"),
QtCore.QT_TRANSLATE_NOOP("Path", "Path Dressup")
], dressupcmdlist)
self.appendMenu([
QtCore.QT_TRANSLATE_NOOP("Path", "&Path"),
QtCore.QT_TRANSLATE_NOOP("Path", "Supplemental Commands")
], prepcmdlist)
self.appendMenu([
QtCore.QT_TRANSLATE_NOOP("Path", "&Path"),
QtCore.QT_TRANSLATE_NOOP("Path", "Path Modification")
], modcmdlist)
if specialcmdlist:
self.appendMenu([
QtCore.QT_TRANSLATE_NOOP("Path", "&Path"),
QtCore.QT_TRANSLATE_NOOP("Path", "Specialty Operations")
], specialcmdlist)
if extracmdlist:
self.appendMenu([QtCore.QT_TRANSLATE_NOOP("Path", "&Path")],
extracmdlist)
self.dressupcmds = dressupcmdlist
curveAccuracy = PathPreferences.defaultLibAreaCurveAccuracy()
if curveAccuracy:
Path.Area.setDefaultParams(Accuracy=curveAccuracy)
Log('Loading Path workbench... done\n')