class AccountReassignPanel(Panel):
def __init__(self, mainwindow):
Panel.__init__(self, mainwindow)
self._setupUi()
self.model = mainwindow.model.account_reassign_panel
self.model.view = self
self.accountComboBox = ComboboxModel(model=self.model.account_list, view=self.accountComboBoxView)
self.continueButton.clicked.connect(self.accept)
self.cancelButton.clicked.connect(self.reject)
def _setupUi(self):
if ISWINDOWS:
self.resize(250, 140)
else:
self.resize(340, 165)
self.setWindowTitle(tr("Re-assign Account"))
self.verticalLayout = QVBoxLayout(self)
self.label = QLabel(self)
self.label.setWordWrap(True)
self.label.setText(tr(
"You\'re about to delete a non-empty account. Select an account to re-assign its "
"transactions to."
))
self.verticalLayout.addWidget(self.label)
self.accountComboBoxView = QComboBox(self)
sizePolicy = QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(self.accountComboBoxView.sizePolicy().hasHeightForWidth())
self.accountComboBoxView.setSizePolicy(sizePolicy)
self.accountComboBoxView.setMinimumSize(QSize(200, 0))
self.verticalLayout.addWidget(self.accountComboBoxView)
spacerItem = QSpacerItem(20, 40, QSizePolicy.Minimum, QSizePolicy.Expanding)
self.verticalLayout.addItem(spacerItem)
self.horizontalLayout = QHBoxLayout()
spacerItem1 = QSpacerItem(40, 20, QSizePolicy.Expanding, QSizePolicy.Minimum)
self.horizontalLayout.addItem(spacerItem1)
self.cancelButton = QPushButton(self)
self.cancelButton.setText(tr("Cancel"))
self.cancelButton.setShortcut("Esc")
self.horizontalLayout.addWidget(self.cancelButton)
self.continueButton = QPushButton(self)
self.continueButton.setDefault(True)
self.continueButton.setText(tr("Continue"))
self.horizontalLayout.addWidget(self.continueButton)
self.verticalLayout.addLayout(self.horizontalLayout)
class ImportWindow(QWidget):
def __init__(self, parent, doc):
QWidget.__init__(self, parent, Qt.Window)
self._setupUi()
self.doc = doc
self.model = ImportWindowModel(document=doc.model)
self.swapOptionsComboBox = ComboboxModel(model=self.model.swap_type_list, view=self.swapOptionsComboBoxView)
self.table = ImportTable(model=self.model.import_table, view=self.tableView)
self.model.view = self
self._setupColumns() # Can only be done after the model has been connected
self.tabView.tabCloseRequested.connect(self.tabCloseRequested)
self.tabView.currentChanged.connect(self.currentTabChanged)
self.targetAccountComboBox.currentIndexChanged.connect(self.targetAccountChanged)
self.importButton.clicked.connect(self.importClicked)
self.swapButton.clicked.connect(self.swapClicked)
def _setupUi(self):
self.setWindowTitle(tr("Import"))
self.resize(557, 407)
self.verticalLayout = QtGui.QVBoxLayout(self)
self.tabView = QTabBar(self)
self.tabView.setMinimumSize(QtCore.QSize(0, 20))
self.verticalLayout.addWidget(self.tabView)
self.targetAccountLayout = QtGui.QHBoxLayout()
self.targetAccountLabel = QtGui.QLabel(tr("Target Account:"))
self.targetAccountLayout.addWidget(self.targetAccountLabel)
self.targetAccountComboBox = QComboBox(self)
self.targetAccountComboBox.setMinimumSize(QtCore.QSize(150, 0))
self.targetAccountLayout.addWidget(self.targetAccountComboBox)
spacerItem = QtGui.QSpacerItem(40, 20, QtGui.QSizePolicy.Expanding, QtGui.QSizePolicy.Minimum)
self.targetAccountLayout.addItem(spacerItem)
self.groupBox = QGroupBox(tr("Are some fields wrong? Fix them!"))
self.gridLayout = QtGui.QGridLayout(self.groupBox)
self.swapOptionsComboBoxView = QComboBox(self.groupBox)
self.gridLayout.addWidget(self.swapOptionsComboBoxView, 0, 0, 1, 2)
self.applyToAllCheckBox = QtGui.QCheckBox(tr("Apply to all accounts"))
self.gridLayout.addWidget(self.applyToAllCheckBox, 1, 0, 1, 1)
self.swapButton = QPushButton(tr("Fix"))
self.gridLayout.addWidget(self.swapButton, 1, 1, 1, 1)
self.targetAccountLayout.addWidget(self.groupBox)
self.verticalLayout.addLayout(self.targetAccountLayout)
self.tableView = TableView(self)
self.tableView.setEditTriggers(QtGui.QAbstractItemView.NoEditTriggers)
self.tableView.setDragEnabled(True)
self.tableView.setDragDropMode(QtGui.QAbstractItemView.InternalMove)
self.tableView.setSelectionMode(QtGui.QAbstractItemView.ExtendedSelection)
self.tableView.setSelectionBehavior(QtGui.QAbstractItemView.SelectRows)
self.tableView.horizontalHeader().setHighlightSections(False)
self.tableView.horizontalHeader().setMinimumSectionSize(18)
self.tableView.verticalHeader().setVisible(False)
self.tableView.verticalHeader().setDefaultSectionSize(18)
self.verticalLayout.addWidget(self.tableView)
self.horizontalLayout = QtGui.QHBoxLayout()
spacerItem1 = QtGui.QSpacerItem(40, 20, QtGui.QSizePolicy.Expanding, QtGui.QSizePolicy.Minimum)
self.horizontalLayout.addItem(spacerItem1)
self.importButton = QPushButton(tr("Import"))
self.horizontalLayout.addWidget(self.importButton)
self.verticalLayout.addLayout(self.horizontalLayout)
self.tabView.setTabsClosable(True)
self.tabView.setDrawBase(False)
self.tabView.setDocumentMode(True)
self.tabView.setUsesScrollButtons(True)
def _setupColumns(self):
# Can't set widget alignment in a layout in the Designer
l = self.targetAccountLayout
l.setAlignment(self.targetAccountLabel, Qt.AlignTop)
l.setAlignment(self.targetAccountComboBox, Qt.AlignTop)
#--- Event Handlers
def currentTabChanged(self, index):
self.model.selected_pane_index = index
def importClicked(self):
self.model.import_selected_pane()
def swapClicked(self):
applyToAll = self.applyToAllCheckBox.isChecked()
self.model.perform_swap(applyToAll)
def tabCloseRequested(self, index):
self.model.close_pane(index)
self.tabView.removeTab(index)
def targetAccountChanged(self, index):
self.model.selected_target_account_index = index
self.table.updateColumnsVisibility()
#--- model --> view
def close(self):
self.hide()
def close_selected_tab(self):
self.tabView.removeTab(self.tabView.currentIndex())
def refresh_target_accounts(self):
# We disconnect the combobox because we don't want the clear() call to set the selected
# target index in the model.
self.targetAccountComboBox.currentIndexChanged.disconnect(self.targetAccountChanged)
self.targetAccountComboBox.clear()
self.targetAccountComboBox.addItems(self.model.target_account_names)
self.targetAccountComboBox.currentIndexChanged.connect(self.targetAccountChanged)
def refresh_tabs(self):
while self.tabView.count():
self.tabView.removeTab(0)
for pane in self.model.panes:
self.tabView.addTab(pane.name)
def set_swap_button_enabled(self, enabled):
self.swapButton.setEnabled(enabled)
def show(self):
# For non-modal dialogs, show() is not enough to bring the window at the forefront, we have
# to call raise() as well
QWidget.show(self)
self.raise_()
def update_selected_pane(self):
index = self.model.selected_pane_index
if index != self.tabView.currentIndex(): # this prevents infinite loops
self.tabView.setCurrentIndex(index)
self.targetAccountComboBox.setCurrentIndex(self.model.selected_target_account_index)
self.table.updateColumnsVisibility()
class ReferencedTableEditor(QWidget):
referenced_table_changed = pyqtSignal(str)
def __init__(self, parent=None):
QWidget.__init__(self, parent)
self.setupUi()
self.cbo_ref_table.setInsertPolicy(QComboBox.InsertAlphabetically)
self.cbo_ref_table.currentIndexChanged[str].connect(self._on_ref_table_changed)
def setupUi(self):
self.setObjectName("ReferencedTableEditor")
self.gridLayout = QGridLayout(self)
self.gridLayout.setVerticalSpacing(10)
self.gridLayout.setObjectName("gridLayout")
self.label_2 = QLabel(self)
self.label_2.setMaximumSize(QSize(100, 16777215))
self.label_2.setObjectName("label_2")
self.gridLayout.addWidget(self.label_2, 1, 0, 1, 1)
self.cbo_source_field = QComboBox(self)
self.cbo_source_field.setMinimumSize(QSize(0, 30))
self.cbo_source_field.setObjectName("cbo_source_field")
self.gridLayout.addWidget(self.cbo_source_field, 2, 1, 1, 1)
self.label = QLabel(self)
self.label.setObjectName("label")
self.gridLayout.addWidget(self.label, 2, 0, 1, 1)
self.label_3 = QLabel(self)
self.label_3.setObjectName("label_3")
self.gridLayout.addWidget(self.label_3, 3, 0, 1, 1)
self.cbo_referencing_col = QComboBox(self)
self.cbo_referencing_col.setMinimumSize(QSize(0, 30))
self.cbo_referencing_col.setObjectName("cbo_referencing_col")
self.gridLayout.addWidget(self.cbo_referencing_col, 3, 1, 1, 1)
self.cbo_ref_table = QComboBox(self)
self.cbo_ref_table.setMinimumSize(QSize(0, 30))
self.cbo_ref_table.setObjectName("cbo_ref_table")
self.gridLayout.addWidget(self.cbo_ref_table, 1, 1, 1, 1)
self.label_2.setText(QApplication.translate("ReferencedTableEditor",
"References"))
self.label.setText(QApplication.translate("ReferencedTableEditor",
"Data source field"))
self.label_3.setText(QApplication.translate("ReferencedTableEditor",
"Referencing"))
#Connect signals
QMetaObject.connectSlotsByName(self)
self.cbo_ref_table.currentIndexChanged[str].connect(self._load_source_table_fields)
@pyqtSlot(str)
def on_data_source_changed(self,data_source_name):
"""
Loads data source fields for the given data source name.
"""
self.load_data_source_fields(data_source_name)
def _on_ref_table_changed(self, table):
"""
Raise signal when the referenced table changes.
:param table: Selected table name.
:type table: str
"""
self.referenced_table_changed.emit(table)
def properties(self):
"""
:returns: Returns the user-defined mapping of linked table and column
pairings.
:rtype: LinkedTableProps
"""
l_table = self.cbo_ref_table.currentText()
s_field = self.cbo_source_field.currentText()
l_field = self.cbo_referencing_col.currentText()
return LinkedTableProps(linked_table=l_table,
source_field=s_field,
linked_field=l_field)
def set_properties(self, table_props):
"""
Sets the combo selection based on the text in the linked table
object properties.
:param table_props: Object containing the linked table information.
:type table_props: LinkedTableProps
"""
setComboCurrentIndexWithText(self.cbo_ref_table, table_props.linked_table)
setComboCurrentIndexWithText(self.cbo_referencing_col, table_props.linked_field)
setComboCurrentIndexWithText(self.cbo_source_field, table_props.source_field)
def load_data_source_fields(self, data_source_name):
"""
Load fields/columns of the given data source.
"""
if data_source_name == "":
self.clear()
return
columns_names = table_column_names(data_source_name)
if len(columns_names) == 0:
return
self.cbo_source_field.clear()
self.cbo_source_field.addItem("")
self.cbo_source_field.addItems(columns_names)
def clear(self):
"""
Resets combo box selections.
"""
self._reset_combo_index(self.cbo_ref_table)
self._reset_combo_index(self.cbo_referencing_col)
self._reset_combo_index(self.cbo_source_field)
def _reset_combo_index(self, combo):
if combo.count > 0:
combo.setCurrentIndex(0)
def reset_referenced_table(self):
self._reset_combo_index(self.cbo_ref_table)
def load_link_tables(self, reg_exp=None, source=TABLES|VIEWS):
self.cbo_ref_table.clear()
self.cbo_ref_table.addItem("")
ref_tables = []
#Table source
if (TABLES & source) == TABLES:
ref_tables.extend(pg_tables())
#View source
if (VIEWS & source) == VIEWS:
ref_tables.extend(pg_views())
source_tables = []
for t in ref_tables:
if not reg_exp is None:
if reg_exp.exactMatch(t):
source_tables.append(t)
else:
source_tables.append(t)
self.cbo_ref_table.addItems(source_tables)
def _load_source_table_fields(self, sel):
self.cbo_referencing_col.clear()
if not sel:
return
columns_names = table_column_names(sel)
self.cbo_referencing_col.clear()
self.cbo_referencing_col.addItem("")
self.cbo_referencing_col.addItems(columns_names)
class WindPanel(QFrame):
def __init__(self, parent):
QFrame.__init__(self, parent)
# self.frame_WindIA = QFrame(parent)
sizePolicy = QSizePolicy(QSizePolicy.Minimum, QSizePolicy.Preferred)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(self.sizePolicy().hasHeightForWidth())
self.setSizePolicy(sizePolicy)
self.setFrameShape(QFrame.StyledPanel)
self.setFrameShadow(QFrame.Raised)
self.setObjectName(("frame_WindIA"))
self.horizontalLayout_32 = QHBoxLayout(self)
self.horizontalLayout_32.setSpacing(0)
self.horizontalLayout_32.setMargin(0)
self.horizontalLayout_32.setObjectName(("horizontalLayout_32"))
self.lblIA = QLabel(self)
self.lblIA.setMinimumSize(QSize(140, 0))
self.lblIA.setMaximumSize(QSize(100, 16777215))
font = QFont()
font.setFamily(("Arial"))
font.setBold(False)
font.setWeight(50)
self.lblIA.setFont(font)
self.lblIA.setObjectName(("lblIA"))
self.horizontalLayout_32.addWidget(self.lblIA)
self.comboBox = QComboBox(self)
sizePolicy = QSizePolicy(QSizePolicy.Minimum, QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.comboBox.sizePolicy().hasHeightForWidth())
self.comboBox.setSizePolicy(sizePolicy)
self.comboBox.setMinimumSize(QSize(60, 0))
font = QFont()
font.setFamily(("Arial"))
font.setBold(False)
font.setWeight(50)
self.comboBox.setFont(font)
self.comboBox.setObjectName(("comboBox"))
self.horizontalLayout_32.addWidget(self.comboBox)
self.speedBox = QLineEdit(self)
sizePolicy = QSizePolicy(QSizePolicy.MinimumExpanding,
QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.speedBox.sizePolicy().hasHeightForWidth())
self.speedBox.setSizePolicy(sizePolicy)
self.speedBox.setMinimumSize(QSize(70, 0))
self.speedBox.setMaximumSize(QSize(16777215, 16777215))
font = QFont()
font.setFamily(("Arial"))
font.setBold(False)
font.setWeight(50)
self.speedBox.setFont(font)
self.speedBox.setObjectName(("speedBox"))
self.horizontalLayout_32.addWidget(self.speedBox)
self.altitude = Altitude.NaN()
self.customValue = Speed(30).Knots
self.comboBox.addItems(["ICAO", "UK", "Custom"])
self.comboBox.currentIndexChanged.connect(self.changeWindType)
self.comboBox.setCurrentIndex(0)
self.lblIA.setText("Wind (kts):")
self.speedBox.setEnabled(False)
def setAltitude(self, value):
self.altitude = value
self.method_5()
# def getValue(self, SpeedUnits_0 = SpeedUnits.KTS):
# return Speed(float(self.speedBox.text()), SpeedUnits_0)
def method_3(self, altitude_0):
altitude = Altitude(float(self.speedBox.text()), AltitudeUnits.FT)
if (self.comboBox.currentIndex() != 0):
return altitude
return Altitude(altitude.Feet - altitude_0.Feet, AltitudeUnits.FT)
def method_5(self):
if self.comboBox.currentIndex() == 0:
self.speedBox.setText(
str(round(Speed.smethod_1(self.altitude).Knots, 1)))
elif self.comboBox.currentIndex() == 1:
self.speedBox.setText(
str(round(Speed.smethod_2(self.altitude).Knots, 1)))
else:
self.speedBox.setText(str(self.customValue))
if self.comboBox.currentIndex() != 2:
self.speedBox.setEnabled(False)
else:
self.speedBox.setEnabled(True)
def changeWindType(self):
self.method_5()
def method_7(self, string_0):
# object[] string0 = new object[] { string_0, this.captionLabel.Caption, this.speedBox.ToString(), this.comboBox.Items[this.comboBox.SelectedIndex] };
return "%s%s\t%s (%s)" % (string_0, "Wind: ", self.speedBox.text(),
self.comboBox.currentText())
def get_speed(self):
try:
return Speed(float(self.speedBox.text()))
except:
return None
Value = property(get_speed, None, None, None)
def get_isEmpty(self):
try:
num = float(self.speedBox.text())
return False
except:
return True
IsEmpty = property(get_isEmpty, None, None, None)
class DogrulaDialog(QDialog):
def __init__(self, ui):
QDialog.__init__(self, ui)
self.ui = ui
self.resize(450, 170)
self.setMinimumSize(QSize(450, 170))
self.setMaximumSize(QSize(500, 200))
self.setWindowTitle(self.trUtf8("Doğrula"))
self.gridLayout = QGridLayout(self)
self.neredenButton = QPushButton(self)
self.neredenButton.setText(self.trUtf8("Nereden"))
self.neredenButton.clicked.connect(self.nereden)
self.gridLayout.addWidget(self.neredenButton, 0, 4, 1, 1)
self.dogrulaButton = QPushButton(self)
self.dogrulaButton.setText(self.trUtf8("Doğrula"))
self.dogrulaButton.clicked.connect(self.dogrula)
self.gridLayout.addWidget(self.dogrulaButton, 3, 4, 1, 1)
self.neredenEdit = QLineEdit(self)
self.neredenEdit.setReadOnly(True)
self.gridLayout.addWidget(self.neredenEdit, 0, 0, 1, 4)
self.hashEdit = QLineEdit(self)
self.hashEdit.setReadOnly(True)
self.gridLayout.addWidget(self.hashEdit, 3, 2, 1, 1)
spacerItem = QSpacerItem(20, 15, QSizePolicy.Minimum, QSizePolicy.Fixed)
self.gridLayout.addItem(spacerItem, 1, 1, 1, 1)
self.comboBox = QComboBox(self)
self.comboBox.setMinimumSize(QSize(100, 0))
self.comboBox.addItem("MD5")
self.comboBox.addItem("SHA1")
self.gridLayout.addWidget(self.comboBox, 3, 1, 1, 1)
self.karaWidget = KaraWidget(self, "=")
self.karaWidget.hide()
def nereden(self):
dosya = QFileDialog.getOpenFileName(self, "", settings().value("Genel/Yol").toString())
if dosya == "":
pass
elif QFile.exists(dosya):
from os.path import abspath, dirname
settings().setValue("Genel/Yol", abspath(dirname(str(dosya))))
self.neredenEdit.setText(dosya)
else:
QMessageBox.warning(self, self.trUtf8("Hata!"), self.trUtf8("Böyle bir dosya mevcut değil!"))
def dogrula(self):
if self.neredenEdit.text() == "":
QMessageBox.warning(self, self.trUtf8("Hata!"), self.trUtf8("Dosya seçmediniz!"))
else:
self.karaWidget.show()
self.karaWidget.start()
def keyPressEvent(self, event):
pass
def resizeEvent(self, event):
self.karaWidget.setGeometry(0,0, event.size().width(), event.size().height())
def createGUIElements(self):
''' Build the GUI based on the parameters for the tool '''
for i, param in enumerate(self.tooltypearray):
# print 'creatgui element %d, %s' %(i, param)
#Swap in the passed params if they exist... loop through each passed
#param and see if it matches... if so swap it in
if self.optional_params.has_key(str(param[0])):
param[2] = self.optional_params[str(param[0])]
#print "Key: %s , Val: %s" % (param[0],param[1])
widgetTemp = QWidget(self.variableBox)
widgetTemp.setObjectName(QString("test_widget").append(QString(i)))
self.test_widget.append(widgetTemp)
hlayout = QHBoxLayout(widgetTemp)
self.hboxlayout.append(hlayout)
hlayout.setMargin(4)
hlayout.setSpacing(4)
hlayout.setObjectName(QString("hboxlayout").append(QString(i)))
test_text = QLabel(widgetTemp)
self.test_text.append(test_text)
test_text.setObjectName(QString("test_text").append(QString(i)))
paramName = param[0].strip()
if param[2].strip() == "Required":
palette = test_text.palette()
palette.setColor(QPalette.WindowText, Qt.red)
test_text.setPalette(palette)
test_text.setText(paramName)
test_text_type = QLabel(widgetTemp)
self.test_text_type.append(test_text_type)
test_text_type.setObjectName(
QString("test_text_type").append(QString(i)))
paramName = param[1].strip()
test_text_type.setText(
QString("(").append(paramName).append(QString(")")))
hlayout.addWidget(test_text)
hlayout.addWidget(test_text_type)
if param[1] == 'db_connection_hook':
test_line = QComboBox(widgetTemp)
db_connection_choices = get_db_connection_names()
for i in db_connection_choices:
test_line.addItem(QString(i))
self.test_line.append(test_line)
test_line.setEnabled(True)
test_line.setMinimumSize(QSize(200, 0))
test_line.setObjectName(
QString("test_line").append(QString(i)))
index = test_line.findText(param[2], Qt.MatchExactly)
test_line.setCurrentIndex(index)
else:
test_line = QLineEdit(widgetTemp)
self.test_line.append(test_line)
test_line.setEnabled(True)
test_line.setMinimumSize(QSize(200, 0))
test_line.setObjectName(
QString("test_line").append(QString(i)))
test_line.setText(QString(param[2]))
hlayout.addWidget(test_line)
# If we have a dir_path or file_path add a select button
if (paramName == QString('dir_path')) or (paramName
== QString('file_path')):
pbnSelect = QPushButton(widgetTemp)
pbnSelect.setObjectName(
QString('pbnSelect').append(QString(i)))
pbnSelect.setText(QString("Select..."))
pbnSelectDelegate = FileDialogSignal(typeName=paramName,
param=test_line)
QObject.connect(
pbnSelectDelegate.o,
SIGNAL("buttonPressed(PyQt_PyObject,PyQt_PyObject)"),
self.on_pbnSelect_released)
QObject.connect(pbnSelect, SIGNAL("released()"),
pbnSelectDelegate.relayButtonSignal)
self.test_line_delegates.append(pbnSelectDelegate)
self.test_line_buttons.append(pbnSelect)
hlayout.addWidget(pbnSelect)
self.vboxlayout.addWidget(widgetTemp)
self.adjustSize()
# Jesse adding help text from opusHelp
tool_path = self.optional_params.get('tool_path', '')
try:
exec_stmt = 'from %s.%s import opusHelp' % (tool_path,
self.module_name)
exec exec_stmt
help = QString(opusHelp())
self.toolhelpEdit.insertPlainText(help)
except Exception, e:
help = 'could not find opusHelp function in tool module'
self.toolhelpEdit.insertPlainText(help)
def toolTypeSelected(self, index):
#print "Got a new selection"
#print self.comboBox.itemText(index)
self.typeSelection = str(self.comboBox.itemText(index))
for testw in self.test_widget:
self.vboxlayout.removeWidget(testw)
testw.hide()
self.tooltypearray = []
self.test_widget = []
self.test_text = []
self.test_line = []
# The tool_config will always have tool_config name
self.tooltypearray.append(["Tool Config Name","tool_config",""])
# Now look up the selected connection type and present to the user...
# First we start at the tool_library
tool_name = str(self.typeSelection)
tool_node = self.tool_nodes[tool_name]
for param_node in tool_node.find('params'):
type_val = param_node.get('param_type')
default_val = param_node.text or ''
self.tooltypearray.append([param_node.get('name'), type_val, default_val])
for i, param in enumerate(self.tooltypearray):
# print "Key: %s , Val: %s" % (param[0],param[1])
paramName = str(param[0] or '').strip()
type_val = str(param[1] or '').strip()
default_val = str(param[2] or '').strip()
if (i==0):
widgetTemp = QFrame(self.variableBox)
widgetTemp.setFrameStyle(QFrame.Panel | QFrame.Raised)
widgetTemp.setLineWidth(2)
else:
widgetTemp = QWidget(self.variableBox)
widgetTemp.setObjectName(QString("test_widget").append(QString(i)))
self.test_widget.append(widgetTemp)
hlayout = QHBoxLayout(widgetTemp)
self.hboxlayout.append(hlayout)
hlayout.setMargin(4)
hlayout.setSpacing(4)
hlayout.setObjectName(QString("hboxlayout").append(QString(i)))
test_text = QLabel(widgetTemp)
self.test_text.append(test_text)
test_text.setObjectName(QString("test_text").append(QString(i)))
if type_val == "Required":
palette = test_text.palette()
palette.setColor(QPalette.WindowText,Qt.red)
test_text.setPalette(palette)
test_text.setText(paramName)
test_text_type = QLabel(widgetTemp)
self.test_text_type.append(test_text_type)
test_text_type.setObjectName(QString("test_text_type").append(QString(i)))
paramName = type_val
test_text_type.setText(QString("(").append(paramName).append(QString(")")))
hlayout.addWidget(test_text)
hlayout.addWidget(test_text_type)
if type_val == 'db_connection_hook':
test_line = QComboBox(widgetTemp)
db_connection_choices = get_db_connection_names()
for i in db_connection_choices:
test_line.addItem(QString(i))
self.test_line.append(test_line)
test_line.setEnabled(True)
test_line.setMinimumSize(QSize(200,0))
test_line.setObjectName(QString("test_line").append(QString(i)))
else:
test_line = QLineEdit(widgetTemp)
self.test_line.append(test_line)
test_line.setEnabled(True)
test_line.setMinimumSize(QSize(200,0))
test_line.setObjectName(QString("test_line").append(QString(i)))
# test_line = QLineEdit(widgetTemp)
# self.test_line.append(test_line)
# test_line.setEnabled(True)
# test_line.setMinimumSize(QSize(200,0))
# test_line.setObjectName(QString("test_line").append(QString(i)))
# test_line.setText(QString(""))
hlayout.addWidget(test_line)
self.vboxlayout.addWidget(widgetTemp)
class OCAHPanel(QFrame):
def __init__(self, parent):
QFrame.__init__(self, parent)
while not isinstance(parent, QDialog):
parent = parent.parent()
self.setObjectName("OCAHPanel" + str(len(parent.findChildren(OCAHPanel))))
# self.frame_WindIA = QFrame(parent)
sizePolicy = QSizePolicy(QSizePolicy.Minimum, QSizePolicy.Preferred)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(self.sizePolicy().hasHeightForWidth())
self.setSizePolicy(sizePolicy)
self.setFrameShape(QFrame.StyledPanel)
self.setFrameShadow(QFrame.Raised)
self.setObjectName(("frame_WindIA"))
self.hLayout = QHBoxLayout(self)
self.hLayout.setSpacing(0)
self.hLayout.setMargin(0)
self.hLayout.setObjectName(("hLayout"))
self.basicFrame = Frame(self, "HL")
self.basicFrame.layoutBoxPanel.setSpacing(0)
# self.basicFrame.layoutBoxPanel.setMargin(0)
self.hLayout.addWidget(self.basicFrame)
self.lblIA = QLabel(self.basicFrame)
self.lblIA.setMinimumSize(QSize(200, 0))
self.lblIA.setMaximumSize(QSize(200, 16777215))
font = QFont()
font.setFamily(("Arial"))
font.setBold(False)
font.setWeight(50)
self.lblIA.setFont(font)
self.lblIA.setObjectName(("lblIA"))
self.basicFrame.Add = self.lblIA
self.cmbType = QComboBox(self.basicFrame)
self.cmbType.setMinimumSize(QSize(70, 0))
self.cmbType.setMaximumWidth(70)
font = QFont()
font.setFamily(("Arial"))
font.setBold(False)
font.setWeight(50)
self.cmbType.setFont(font)
self.cmbType.setObjectName(("cmbType"))
self.basicFrame.Add = self.cmbType
self.txtAltitudeM = QLineEdit(self.basicFrame)
self.txtAltitudeM.setEnabled(True)
font = QFont()
font.setBold(False)
font.setWeight(50)
self.txtAltitudeM.setFont(font)
self.txtAltitudeM.setObjectName(self.objectName() + "_txtAltitudeM")
self.txtAltitudeM.setText("0.0")
self.txtAltitudeM.setMinimumWidth(70)
self.txtAltitudeM.setMaximumWidth(70)
self.basicFrame.Add = self.txtAltitudeM
labelM = QLabel(self.basicFrame)
labelM.setObjectName(("labelM"))
labelM.setText(" m ")
self.basicFrame.Add = labelM
self.txtAltitude = QLineEdit(self.basicFrame)
sizePolicy = QSizePolicy(QSizePolicy.MinimumExpanding, QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(self.txtAltitude.sizePolicy().hasHeightForWidth())
self.txtAltitude.setSizePolicy(sizePolicy)
self.txtAltitude.setMinimumSize(QSize(70, 0))
self.txtAltitude.setMaximumSize(QSize(70, 16777215))
font = QFont()
font.setFamily(("Arial"))
font.setBold(False)
font.setWeight(50)
self.txtAltitude.setFont(font)
self.txtAltitude.setObjectName(self.objectName() + "_txtAltitude")
self.basicFrame.Add = self.txtAltitude
labelFt = QLabel(self.basicFrame)
labelFt.setObjectName(("labelFt"))
labelFt.setText(" ft")
self.basicFrame.Add = labelFt
spacerItem = QSpacerItem(10,10,QSizePolicy.Expanding, QSizePolicy.Minimum)
self.hLayout.addItem(spacerItem)
self.altitude = Altitude.NaN()
self.customValue = Speed(30).Knots
self.cmbType.addItems(["OCA", "OCH"])
# self.cmbType.currentIndexChanged.connect(self.changeType)
self.cmbType.setCurrentIndex(0)
self.lblIA.setText("Intermediate Segment Minimum:")
# self.txtAltitude.setEnabled(False)
self.txtAltitudeM.textChanged.connect(self.txtAltitudeMChanged)
self.txtAltitude.textChanged.connect(self.txtAltitudeChanged)
self.captionUnits = "ft"
self.flag = 0
self.txtAltitudeM.setText("0.0")
self.txtAltitude.setText("0.0")
def txtAltitudeChanged(self):
try:
test = float(self.txtAltitude.text())
if self.flag==0:
self.flag=1;
if self.flag==2:
self.flag=0;
if self.flag==1:
try:
self.txtAltitudeM.setText(str(round(Unit.ConvertFeetToMeter(float(self.txtAltitude.text())), 4)))
except:
self.txtAltitudeM.setText("0.0")
self.emit(SIGNAL("Event_0"), self)
except:
str0 = "You must input the float type in \"%s\"."%(self.Caption)
QMessageBox.warning(self, "Warning" , str0)
self.txtAltitudeM.setText("0.0")
self.txtAltitude.setText("0.0")
def txtAltitudeMChanged(self):
try:
test = float(self.txtAltitudeM.text())
if self.flag==0:
self.flag=2;
if self.flag==1:
self.flag=0;
if self.flag==2:
try:
self.txtAltitude.setText(str(round(Unit.ConvertMeterToFeet(float(self.txtAltitudeM.text())), 4)))
except:
self.txtAltitude.setText("0.0")
self.emit(SIGNAL("Event_0"), self)
except:
str0 = "You must input the float type in \"%s\"."%(self.Caption)
QMessageBox.warning(self, "Warning" , str0)
self.txtAltitude.setText("0.0")
self.txtAltitudeM.setText("0.0")
try:
self.altitude = Altitude(float(self.txtAltitude.text()), AltitudeUnits.FT)
except:
self.altitude = Altitude.NaN()
# def txtAltitudeChanged(self):
# try:
# self.altitude = Altitude(float(self.txtAltitude.text()), AltitudeUnits.FT)
# except:
# self.altitude = Altitude.NaN()
# def setAltitude(self, value):
# self.altitude = value
# def getValue(self, SpeedUnits_0 = SpeedUnits.KTS):
# return Speed(float(self.txtAltitude.text()), SpeedUnits_0)
def method_2(self, altitude_0):
altitude = Altitude(0)
try:
altitude = Altitude(float(self.txtAltitude.text()), AltitudeUnits.FT)
except:
altitude = Altitude(0)
if (self.cmbType.currentIndex() == 0):
return altitude
return Altitude(altitude.Feet + altitude_0.Feet, AltitudeUnits.FT);
def method_3(self, altitude_0):
altitude = Altitude(0)
try:
altitude = Altitude(float(self.txtAltitude.text()), AltitudeUnits.FT)
except:
altitude = Altitude(0)
if (self.cmbType.currentIndex() != 0):
return altitude
return Altitude(altitude.Feet - altitude_0.Feet, AltitudeUnits.FT);
def changeType(self):
pass
# def get_altitude(self):
# return self.altitude
# Value = property(get_altitude, setAltitude, None, None)
def get_isEmpty(self):
try:
num = float(self.txtAltitude.text())
return False
except:
return True
IsEmpty = property(get_isEmpty, None, None, None)
def get_CaptionUnits(self):
return self.captionUnits
def set_CaptionUnits(self, captionUnits):
self.captionUnits = captionUnits
CaptionUnits = property(get_CaptionUnits, set_CaptionUnits, None, None)
def get_Caption(self):
caption = self.lblIA.text()
val = caption.left(caption.length() - 1)
return val
def set_Caption(self, captionStr):
self.lblIA.setText(captionStr + ":")
Caption = property(get_Caption, set_Caption, None, None)
def get_Value(self):
try:
return Altitude(float(self.txtAltitudeM.text()))
except:
return Altitude(0.0)
def set_Value(self, altitude):
if isinstance(altitude, Altitude):
if self.captionUnits == "m":
self.txtAltitudeM.setText(str(altitude.Metres))
else:
self.txtAltitude.setText(str(altitude.Feet))
else:
str0 = "You must input the type \"Altitude\" in \"%s\"."%(self.Caption)
QMessageBox.warning(self, "Warning" , str0)
self.txtAltitudeM.setText("0.0")
Value = property(get_Value, set_Value, None, None)
def set_LabelWidth(self, width):
self.lblIA.setMinimumSize(QSize(width, 0))
self.lblIA.setMaximumSize(QSize(width, 16777215))
LabelWidth = property(None, set_LabelWidth, None, None)
def get_ReadOnly(self):
return self.txtAltitudeM.isReadOnly()
def set_ReadOnly(self, bool):
self.txtAltitudeM.setReadOnly(bool)
self.txtAltitude.setReadOnly(bool)
ReadOnly = property(get_ReadOnly, set_ReadOnly, None, None)
def get_Enabled(self):
return self.txtAltitudeM.isEnabled()
def set_Enabled(self, bool):
self.txtAltitudeM.setEnabled(bool)
self.txtAltitude.setEnabled(bool)
Enabled = property(get_Enabled, set_Enabled, None, None)
def createGUIElements(self):
''' Build the GUI based on the parameters for the tool '''
for i, param in enumerate(self.tooltypearray):
# print 'creatgui element %d, %s' %(i, param)
#Swap in the passed params if they exist... loop through each passed
#param and see if it matches... if so swap it in
if self.optional_params.has_key(str(param[0])):
param[2] = self.optional_params[str(param[0])]
#print "Key: %s , Val: %s" % (param[0],param[1])
widgetTemp = QWidget(self.variableBox)
widgetTemp.setObjectName(QString("test_widget").append(QString(i)))
self.test_widget.append(widgetTemp)
hlayout = QHBoxLayout(widgetTemp)
self.hboxlayout.append(hlayout)
hlayout.setMargin(4)
hlayout.setSpacing(4)
hlayout.setObjectName(QString("hboxlayout").append(QString(i)))
test_text = QLabel(widgetTemp)
self.test_text.append(test_text)
test_text.setObjectName(QString("test_text").append(QString(i)))
paramName = param[0].strip()
if param[2].strip() == "Required":
palette = test_text.palette()
palette.setColor(QPalette.WindowText,Qt.red)
test_text.setPalette(palette)
test_text.setText(paramName)
test_text_type = QLabel(widgetTemp)
self.test_text_type.append(test_text_type)
test_text_type.setObjectName(QString("test_text_type").append(QString(i)))
paramName = param[1].strip()
test_text_type.setText(QString("(").append(paramName).append(QString(")")))
hlayout.addWidget(test_text)
hlayout.addWidget(test_text_type)
if param[1] == 'db_connection_hook':
test_line = QComboBox(widgetTemp)
db_connection_choices = get_db_connection_names()
for i in db_connection_choices:
test_line.addItem(QString(i))
self.test_line.append(test_line)
test_line.setEnabled(True)
test_line.setMinimumSize(QSize(200,0))
test_line.setObjectName(QString("test_line").append(QString(i)))
index = test_line.findText(param[2], Qt.MatchExactly)
test_line.setCurrentIndex(index)
else:
test_line = QLineEdit(widgetTemp)
self.test_line.append(test_line)
test_line.setEnabled(True)
test_line.setMinimumSize(QSize(200,0))
test_line.setObjectName(QString("test_line").append(QString(i)))
test_line.setText(QString(param[2]))
hlayout.addWidget(test_line)
# If we have a dir_path or file_path add a select button
if (paramName == QString('dir_path')) or (paramName == QString('file_path')):
pbnSelect = QPushButton(widgetTemp)
pbnSelect.setObjectName(QString('pbnSelect').append(QString(i)))
pbnSelect.setText(QString("Select..."))
pbnSelectDelegate = FileDialogSignal(typeName=paramName,param=test_line)
QObject.connect(pbnSelectDelegate.o, SIGNAL("buttonPressed(PyQt_PyObject,PyQt_PyObject)"),
self.on_pbnSelect_released)
QObject.connect(pbnSelect, SIGNAL("released()"), pbnSelectDelegate.relayButtonSignal)
self.test_line_delegates.append(pbnSelectDelegate)
self.test_line_buttons.append(pbnSelect)
hlayout.addWidget(pbnSelect)
self.vboxlayout.addWidget(widgetTemp)
self.adjustSize()
# Jesse adding help text from opusHelp
tool_path = self.optional_params.get('tool_path','')
try:
exec_stmt = 'from %s.%s import opusHelp' % (tool_path, self.module_name)
exec exec_stmt
help = QString(opusHelp())
self.toolhelpEdit.insertPlainText(help)
except Exception, e:
help = 'could not find opusHelp function in tool module'
self.toolhelpEdit.insertPlainText(help)
def toolTypeSelected(self, index):
#print "Got a new selection"
#print self.comboBox.itemText(index)
self.typeSelection = str(self.comboBox.itemText(index))
for testw in self.test_widget:
self.vboxlayout.removeWidget(testw)
testw.hide()
self.tooltypearray = []
self.test_widget = []
self.test_text = []
self.test_line = []
# The tool_config will always have tool_config name
self.tooltypearray.append(["Tool Config Name", "tool_config", ""])
# Now look up the selected connection type and present to the user...
# First we start at the tool_library
tool_name = str(self.typeSelection)
tool_node = self.tool_nodes[tool_name]
for param_node in tool_node.find('params'):
type_val = param_node.get('param_type')
default_val = param_node.text or ''
self.tooltypearray.append(
[param_node.get('name'), type_val, default_val])
for i, param in enumerate(self.tooltypearray):
# print "Key: %s , Val: %s" % (param[0],param[1])
paramName = str(param[0] or '').strip()
type_val = str(param[1] or '').strip()
default_val = str(param[2] or '').strip()
if (i == 0):
widgetTemp = QFrame(self.variableBox)
widgetTemp.setFrameStyle(QFrame.Panel | QFrame.Raised)
widgetTemp.setLineWidth(2)
else:
widgetTemp = QWidget(self.variableBox)
widgetTemp.setObjectName(QString("test_widget").append(QString(i)))
self.test_widget.append(widgetTemp)
hlayout = QHBoxLayout(widgetTemp)
self.hboxlayout.append(hlayout)
hlayout.setMargin(4)
hlayout.setSpacing(4)
hlayout.setObjectName(QString("hboxlayout").append(QString(i)))
test_text = QLabel(widgetTemp)
self.test_text.append(test_text)
test_text.setObjectName(QString("test_text").append(QString(i)))
if type_val == "Required":
palette = test_text.palette()
palette.setColor(QPalette.WindowText, Qt.red)
test_text.setPalette(palette)
test_text.setText(paramName)
test_text_type = QLabel(widgetTemp)
self.test_text_type.append(test_text_type)
test_text_type.setObjectName(
QString("test_text_type").append(QString(i)))
paramName = type_val
test_text_type.setText(
QString("(").append(paramName).append(QString(")")))
hlayout.addWidget(test_text)
hlayout.addWidget(test_text_type)
if type_val == 'db_connection_hook':
test_line = QComboBox(widgetTemp)
db_connection_choices = get_db_connection_names()
for i in db_connection_choices:
test_line.addItem(QString(i))
self.test_line.append(test_line)
test_line.setEnabled(True)
test_line.setMinimumSize(QSize(200, 0))
test_line.setObjectName(
QString("test_line").append(QString(i)))
else:
test_line = QLineEdit(widgetTemp)
self.test_line.append(test_line)
test_line.setEnabled(True)
test_line.setMinimumSize(QSize(200, 0))
test_line.setObjectName(
QString("test_line").append(QString(i)))
# test_line = QLineEdit(widgetTemp)
# self.test_line.append(test_line)
# test_line.setEnabled(True)
# test_line.setMinimumSize(QSize(200,0))
# test_line.setObjectName(QString("test_line").append(QString(i)))
# test_line.setText(QString(""))
hlayout.addWidget(test_line)
self.vboxlayout.addWidget(widgetTemp)
class ReferencedTableEditor(QWidget):
referenced_table_changed = pyqtSignal(str)
def __init__(self, parent=None):
QWidget.__init__(self, parent)
self.setupUi()
self.cbo_ref_table.setInsertPolicy(QComboBox.InsertAlphabetically)
self.cbo_ref_table.currentIndexChanged[str].connect(
self._on_ref_table_changed)
#Tables that will be omitted from the referenced table list
self._omit_ref_tables = []
def add_omit_table(self, table):
"""
Add a table name that will be omitted from the list of referenced
tables.
:param table: Table name that will be omitted
:type table: str
"""
if not table in self._omit_ref_tables:
self._omit_ref_tables.append(table)
def add_omit_tables(self, tables):
"""
Add a list of tables that will be omitted from the list of referenced
tables.
:param tables: Table names to be omitted.
:type tables: list
"""
for t in tables:
self.add_omit_table(t)
@property
def omit_tables(self):
"""
:return: Returns a list of tables that are to be omitted from the
list of referenced tables.
"""
return self._omit_ref_tables
def setupUi(self):
self.setObjectName("ReferencedTableEditor")
self.gridLayout = QGridLayout(self)
self.gridLayout.setVerticalSpacing(10)
self.gridLayout.setObjectName("gridLayout")
self.label_2 = QLabel(self)
self.label_2.setMaximumSize(QSize(100, 16777215))
self.label_2.setObjectName("label_2")
self.gridLayout.addWidget(self.label_2, 1, 0, 1, 1)
self.cbo_source_field = QComboBox(self)
self.cbo_source_field.setMinimumSize(QSize(0, 30))
self.cbo_source_field.setObjectName("cbo_source_field")
self.gridLayout.addWidget(self.cbo_source_field, 2, 1, 1, 1)
self.label = QLabel(self)
self.label.setObjectName("label")
self.gridLayout.addWidget(self.label, 2, 0, 1, 1)
self.label_3 = QLabel(self)
self.label_3.setObjectName("label_3")
self.gridLayout.addWidget(self.label_3, 3, 0, 1, 1)
self.cbo_referencing_col = QComboBox(self)
self.cbo_referencing_col.setMinimumSize(QSize(0, 30))
self.cbo_referencing_col.setObjectName("cbo_referencing_col")
self.gridLayout.addWidget(self.cbo_referencing_col, 3, 1, 1, 1)
self.cbo_ref_table = QComboBox(self)
self.cbo_ref_table.setMinimumSize(QSize(0, 30))
self.cbo_ref_table.setObjectName("cbo_ref_table")
self.gridLayout.addWidget(self.cbo_ref_table, 1, 1, 1, 1)
self.label_2.setText(
QApplication.translate("ReferencedTableEditor", "References"))
self.label.setText(
QApplication.translate("ReferencedTableEditor",
"Data source field"))
self.label_3.setText(
QApplication.translate("ReferencedTableEditor", "Referencing"))
self._current_profile = current_profile()
self._current_profile_tables = []
if not self._current_profile is None:
self._current_profile_tables = self._current_profile.table_names()
#Connect signals
QMetaObject.connectSlotsByName(self)
self.cbo_ref_table.currentIndexChanged[str].connect(
self._load_source_table_fields)
@pyqtSlot(str)
def on_data_source_changed(self, data_source_name):
"""
Loads data source fields for the given data source name.
"""
self.load_data_source_fields(data_source_name)
def _on_ref_table_changed(self, table):
"""
Raise signal when the referenced table changes.
:param table: Selected table name.
:type table: str
"""
self.referenced_table_changed.emit(table)
def properties(self):
"""
:returns: Returns the user-defined mapping of linked table and column
pairings.
:rtype: LinkedTableProps
"""
l_table = self.cbo_ref_table.currentText()
s_field = self.cbo_source_field.currentText()
l_field = self.cbo_referencing_col.currentText()
return LinkedTableProps(linked_table=l_table,
source_field=s_field,
linked_field=l_field)
def set_properties(self, table_props):
"""
Sets the combo selection based on the text in the linked table
object properties.
:param table_props: Object containing the linked table information.
:type table_props: LinkedTableProps
"""
setComboCurrentIndexWithText(self.cbo_ref_table,
table_props.linked_table)
setComboCurrentIndexWithText(self.cbo_referencing_col,
table_props.linked_field)
setComboCurrentIndexWithText(self.cbo_source_field,
table_props.source_field)
def load_data_source_fields(self, data_source_name):
"""
Load fields/columns of the given data source.
"""
if data_source_name == "":
self.clear()
return
columns_names = table_column_names(data_source_name)
if len(columns_names) == 0:
return
self.cbo_source_field.clear()
self.cbo_source_field.addItem("")
self.cbo_source_field.addItems(columns_names)
def clear(self):
"""
Resets combo box selections.
"""
self._reset_combo_index(self.cbo_ref_table)
self._reset_combo_index(self.cbo_referencing_col)
self._reset_combo_index(self.cbo_source_field)
def _reset_combo_index(self, combo):
if combo.count > 0:
combo.setCurrentIndex(0)
def reset_referenced_table(self):
self._reset_combo_index(self.cbo_ref_table)
def load_link_tables(self, reg_exp=None, source=TABLES | VIEWS):
self.cbo_ref_table.clear()
self.cbo_ref_table.addItem("")
ref_tables = []
#Table source
if (TABLES & source) == TABLES:
ref_tables.extend(pg_tables(exclude_lookups=True))
#View source
if (VIEWS & source) == VIEWS:
ref_tables.extend(pg_views())
source_tables = []
for t in ref_tables:
#Ensure we are dealing with tables in the current profile
if not t in self._current_profile_tables:
continue
#Assert if the table is in the list of omitted tables
if t in self._omit_ref_tables:
continue
if not reg_exp is None:
if reg_exp.indexIn(t) >= 0:
source_tables.append(t)
else:
source_tables.append(t)
source_tables = source_tables + pg_views()
self.cbo_ref_table.addItems(source_tables)
def _load_source_table_fields(self, sel):
self.cbo_referencing_col.clear()
if not sel:
return
columns_names = table_column_names(sel)
self.cbo_referencing_col.clear()
self.cbo_referencing_col.addItem("")
self.cbo_referencing_col.addItems(columns_names)
class ComboBoxPanel(QWidget):
def __init__(self, parent, editable=False, spacerItemMove=False):
QWidget.__init__(self, parent)
while not isinstance(parent, QDialog):
parent = parent.parent()
self.setObjectName("ComboBoxPanel" +
str(len(parent.findChildren(ComboBoxPanel))))
self.hLayoutBoxPanel = QHBoxLayout(self)
self.hLayoutBoxPanel.setSpacing(0)
self.hLayoutBoxPanel.setContentsMargins(0, 0, 0, 0)
self.hLayoutBoxPanel.setObjectName(("hLayoutBoxPanel"))
self.frameBoxPanel = QFrame(self)
sizePolicy = QSizePolicy(QSizePolicy.Preferred, QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.frameBoxPanel.sizePolicy().hasHeightForWidth())
self.frameBoxPanel.setSizePolicy(sizePolicy)
self.frameBoxPanel.setFrameShape(QFrame.NoFrame)
self.frameBoxPanel.setFrameShadow(QFrame.Raised)
self.frameBoxPanel.setObjectName(("frameBoxPanel"))
self.hLayoutframeBoxPanel = QHBoxLayout(self.frameBoxPanel)
self.hLayoutframeBoxPanel.setSpacing(0)
self.hLayoutframeBoxPanel.setMargin(0)
self.hLayoutframeBoxPanel.setObjectName(("hLayoutframeBoxPanel"))
self.captionLabel = QLabel(self.frameBoxPanel)
sizePolicy = QSizePolicy(QSizePolicy.Fixed, QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.captionLabel.sizePolicy().hasHeightForWidth())
self.captionLabel.setSizePolicy(sizePolicy)
self.captionLabel.setMinimumSize(QSize(200, 0))
self.captionLabel.setMaximumSize(QSize(200, 16777215))
font = QFont()
font.setBold(False)
font.setWeight(50)
self.captionLabel.setFont(font)
self.captionLabel.setObjectName(("captionLabel"))
self.hLayoutframeBoxPanel.addWidget(self.captionLabel)
self.comboBox = QComboBox(self.frameBoxPanel)
self.comboBox.setEnabled(True)
font = QFont()
font.setBold(False)
font.setWeight(50)
self.comboBox.setFont(font)
self.comboBox.setObjectName(self.objectName() + "_comboBox")
self.comboBox.setMinimumWidth(70)
# self.comboBox.setMaximumWidth(70)
# self.hLayoutframeBoxPanel.addWidget(self.lineEdit)
self.hLayoutframeBoxPanel.addWidget(self.comboBox)
self.imageButton = QToolButton(self.frameBoxPanel)
self.imageButton.setText((""))
icon = QIcon()
icon.addPixmap(QPixmap(("Resource/convex_hull.png")), QIcon.Normal,
QIcon.Off)
self.imageButton.setIcon(icon)
self.imageButton.setObjectName(("imageButton"))
self.imageButton.setVisible(False)
self.hLayoutframeBoxPanel.addWidget(self.imageButton)
self.hLayoutBoxPanel.addWidget(self.frameBoxPanel)
if not spacerItemMove:
spacerItem = QSpacerItem(10, 10, QSizePolicy.Expanding,
QSizePolicy.Minimum)
self.hLayoutBoxPanel.addItem(spacerItem)
self.comboBox.currentIndexChanged.connect(self.comboBoxChanged)
# self.comboBox.editTextChanged.connect(self.comboBoxEditTextChanged)
self.imageButton.clicked.connect(self.imageButtonClicked)
self.captionUnits = ""
self.hasObject = False
self.objectList = []
if editable == True:
self.lineEdit = QLineEdit(self.frameBoxPanel)
self.lineEdit.setObjectName("lineEdit")
self.hLayoutframeBoxPanel.insertWidget(1, self.lineEdit)
self.comboBox.setLineEdit(self.lineEdit)
self.lineEdit.returnPressed.connect(self.comboBoxEditTextChanged)
def FindString(self, string):
return self.comboBox.findText(string)
def comboBoxEditTextChanged(self):
self.comboBox.showPopup()
def get_Count(self):
return self.comboBox.count()
Count = property(get_Count, None, None, None)
def method_0(self):
return self.comboBox.currentIndex(
) >= 0 and self.SelectedItem != None and self.SelectedItem != ""
def method_3(self, string_0):
return self.comboBox.findText(string_0)
def method_11(self, string_0):
if (self.IsEmpty):
return "%s%s\t" % (string_0, self.Caption)
return "%s%s\t%s %s" % (string_0, self.Caption, self.Value,
self.CaptionUnits)
def comboBoxChanged(self):
self.emit(SIGNAL("Event_0"), self)
def IndexOf(self, item):
if isinstance(item, str) or isinstance(item, QString):
return self.comboBox.findText(item)
else:
return self.comboBox.findText(item.ToString())
def Contains(self, item):
compStr = None
if isinstance(item, str):
compStr = item
elif isinstance(item, float) or isinstance(item, int):
compStr = str(item)
else:
compStr = item.ToString()
for i in range(self.comboBox.count()):
comboItemstr = self.comboBox.itemText(i)
if compStr == comboItemstr:
return True
return False
def Clear(self):
self.comboBox.clear()
self.objectList = []
self.hasObject = False
def Add(self, item):
if not isinstance(item, str) and not isinstance(item, QString):
self.comboBox.addItem(item.ToString())
self.objectList.append(item)
self.hasObject = True
return
self.comboBox.addItem(item)
self.hasObject = False
def Insert(self, index, item):
if not isinstance(item, str) and not isinstance(item, QString):
self.comboBox.insertItem(index, item.ToString())
self.objectList.insert(index, item)
self.hasObject = True
return
self.comboBox.insertItem(index, item)
self.hasObject = False
def imageButtonClicked(self):
self.emit(SIGNAL("Event_3"), self)
def get_Caption(self):
caption = self.captionLabel.text()
findIndex = caption.indexOf("(")
if findIndex > 0:
val = caption.left(findIndex)
return val
return caption
def set_Caption(self, captionStr):
if captionStr == "":
self.captionLabel.setText("")
self.LabelWidth = 0
return
if self.CaptionUnits != "" and self.CaptionUnits != None:
self.captionLabel.setText(captionStr + "(" +
QString(self.CaptionUnits) + ")" + ":")
else:
self.captionLabel.setText(captionStr + ":")
Caption = property(get_Caption, set_Caption, None, None)
def get_CaptionUnits(self):
return self.captionUnits
def set_CaptionUnits(self, captionUnits):
self.captionUnits = captionUnits
CaptionUnits = property(get_CaptionUnits, set_CaptionUnits, None, None)
def set_ButtonVisible(self, bool):
self.imageButton.setVisible(bool)
ButtonVisible = property(None, set_ButtonVisible, None, None)
# def get_Value(self):
# return self.comboBox.currentIndex()
# def set_Value(self, value):
# try:
# self.comboBox.setCurrentIndex(value)
# except:
# self.textBox.setText("")
# Value = property(get_Value, set_Value, None, None)
def get_IsEmpty(self):
return self.comboBox.currentText() == "" or self.comboBox.currentIndex(
) == -1
IsEmpty = property(get_IsEmpty, None, None, None)
def get_ReadOnly(self):
return self.textBox.isReadOnly()
# def set_ReadOnly(self, bool):
# self.comboBox.setR.setReadOnly(bool)
# ReadOnly = property(get_ReadOnly, set_ReadOnly, None, None)
def set_LabelWidth(self, width):
self.captionLabel.setMinimumSize(QSize(width, 0))
self.captionLabel.setMaximumSize(QSize(width, 16777215))
LabelWidth = property(None, set_LabelWidth, None, None)
def set_Width(self, width):
self.comboBox.setMinimumSize(QSize(width, 0))
self.comboBox.setMaximumSize(QSize(width, 16777215))
Width = property(None, set_Width, None, None)
def set_Button(self, imageName):
if imageName == None or imageName == "":
self.imageButton.setVisible(False)
return
icon = QIcon()
icon.addPixmap(QPixmap(("Resource/" + imageName)), QIcon.Normal,
QIcon.Off)
self.imageButton.setIcon(icon)
self.imageButton.setVisible(True)
Button = property(None, set_Button, None, None)
def get_SelectedIndex(self):
return self.comboBox.currentIndex()
def set_SelectedIndex(self, index):
if self.comboBox.count() == 0:
return
if index > self.comboBox.count() - 1:
self.comboBox.setCurrentIndex(0)
else:
self.comboBox.setCurrentIndex(index)
SelectedIndex = property(get_SelectedIndex, set_SelectedIndex, None, None)
def get_Value(self):
return self.comboBox.currentIndex()
def set_Value(self, valueStr):
if self.comboBox.count() == 0:
return
if valueStr == None:
self.SelectedIndex = -1
return
self.comboBox.setCurrentIndex(self.comboBox.findText(str(valueStr)))
Value = property(get_Value, set_Value, None, None)
def get_Items(self):
# if self.hasObject:
# return self.objectList
itemList = []
if self.comboBox.count() > 0:
for i in range(self.comboBox.count()):
itemList.append(self.comboBox.itemText(i))
return itemList
def set_AddItems(self, strList):
self.Clear()
if len(strList) != 0 and (not isinstance(strList[0], str)
and not isinstance(strList[0], QString)):
for obj in strList:
self.comboBox.addItem(obj.ToString())
self.objectList.append(obj)
self.hasObject = True
return
self.comboBox.addItems(strList)
Items = property(get_Items, set_AddItems, None, None)
def get_Enabled(self):
return self.comboBox.isEnabled()
def set_Enabled(self, bool):
self.comboBox.setEnabled(bool)
Enabled = property(get_Enabled, set_Enabled, None, None)
def get_Visible(self):
return self.isVisible()
def set_Visible(self, bool):
self.setVisible(bool)
Visible = property(get_Visible, set_Visible, None, None)
def get_Editable(self):
return self.comboBox.isEditable()
def set_Editable(self, bool):
self.comboBox.setEditable(bool)
Editable = property(get_Editable, set_Editable, None, None)
def get_SelectedItem(self):
if self.comboBox.count() == 0:
return None
if self.hasObject:
return self.objectList[self.SelectedIndex]
return self.comboBox.currentText()
def set_SelectedItem(self, val):
index = self.comboBox.findText(val)
self.comboBox.setCurrentIndex(index)
SelectedItem = property(get_SelectedItem, set_SelectedItem, None, None)
