def create_dock_widget(self):
dock_widget = QDockWidget(self)
dock_widget.setMaximumWidth(50)
dock_widget.setAllowedAreas(Qt.LeftDockWidgetArea)
vbox = QVBoxLayout()
button_bold = QPushButton()
button_bold.setIcon(QIcon('bold.png'))
button_bold.setFixedSize(32, 32)
button_bold.clicked.connect(self.on_bold_button_clicked)
button_italic = QPushButton()
button_italic.setIcon(QIcon('italic.png'))
button_italic.setFixedSize(32, 32)
button_italic.clicked.connect(self.on_italic_button_clicked)
vbox.addWidget(button_bold)
vbox.addWidget(button_italic)
vbox.addStretch()
group_box = QGroupBox()
group_box.setLayout(vbox)
dock_widget.setWidget(group_box)
self.addDockWidget(Qt.LeftDockWidgetArea, dock_widget)
def createTreeView(self):
dockWidget = QDockWidget()
dockWidget.setAllowedAreas(Qt.LeftDockWidgetArea)
dockWidget.setFeatures(QDockWidget.NoDockWidgetFeatures)
dockWidget.setTitleBarWidget(QWidget())
self.treeView = QTreeView()
self.treeView.clicked.connect(self.treeItemClicked)
self.treeModel = TreeModel()
self.treeView.setModel(self.treeModel)
self.logo = QLabel()
logoPixmap = QPixmap(CMAKE_INSTALL_PREFIX + '/share/jderobot/resources/jderobot.png')
self.logo.setPixmap(logoPixmap)
self.upButton = QPushButton()
self.upButton.setText('Up')
self.upButton.clicked.connect(self.upButtonClicked)
leftContainer = QWidget()
leftLayout = QVBoxLayout()
leftLayout.addWidget(self.treeView)
leftLayout.addWidget(self.upButton)
leftLayout.addWidget(self.logo)
leftContainer.setLayout(leftLayout)
dockWidget.setWidget(leftContainer)
self.addDockWidget(Qt.LeftDockWidgetArea, dockWidget)
def __init__(self, parent=None):
QMainWindow.__init__(self, parent)
self.tool_bar = self.addToolBar('Main Toolbar')
self.central_widget = CentralWidget(self)
self.setCentralWidget(self.central_widget)
self.min_time_points = 4
self.bin_box = QSpinBox()
self.filter_box = QSpinBox()
self.update_toolbar()
# output window
self.output_widget = QTextEdit()
self.output_widget.setReadOnly(True)
b_dock = QDockWidget('Output')
b_dock.setAllowedAreas(QtCore.Qt.BottomDockWidgetArea)
b_dock.setWidget(self.output_widget)
self.addDockWidget(QtCore.Qt.BottomDockWidgetArea, b_dock)
self.tool_bar.addAction(b_dock.toggleViewAction())
# Analyzer container tab widget
self.analyzer_container = QTabWidget(self)
self.analyzer_container.setTabPosition(QTabWidget.West)
self.analyzer_container.setMovable(True)
l_dock = QDockWidget('Analyzer container')
l_dock.setAllowedAreas(QtCore.Qt.LeftDockWidgetArea
| QtCore.Qt.RightDockWidgetArea)
l_dock.setWidget(self.analyzer_container)
self.addDockWidget(QtCore.Qt.LeftDockWidgetArea, l_dock)
self.tool_bar.addAction(l_dock.toggleViewAction())
# status bar
self.status_bar = QStatusBar(self)
self.setStatusBar(self.status_bar)
def __init__(self, parent=None):
super(MainWindow, self).__init__(parent) # Inicializa janela
self.figure = plt.figure(figsize=(10,
6)) # Define figura e seu tamanho
# Caracteristicas do mapa
m = Basemap(
resolution='i', # c, l, i, h, f or None
projection='merc',
lat_0=-22.525,
lon_0=-48.865,
llcrnrlon=-53.25,
llcrnrlat=-25.1,
urcrnrlon=-44.48,
urcrnrlat=-19.5)
m.drawmapboundary(fill_color='aqua') # Contorno
m.fillcontinents(color='gray', lake_color='aqua') # Continente
m.drawcoastlines() # Costa
m.readshapefile('SP_Municipios/Sao_Paulo_Municipios',
'Sao_Paulo_Municipios')
self.canvas = FigureCanvas(self.figure)
self.setCentralWidget(self.canvas)
simulParamDockWidget = QDockWidget('Simulação', self)
simulParamDockWidget.setObjectName('simulParamDockWidget')
simulParamDockWidget.setAllowedAreas(Qt.LeftDockWidgetArea
| Qt.RightDockWidgetArea)
simulParamDockWidget.setFeatures(QDockWidget.DockWidgetFloatable
| QDockWidget.DockWidgetMovable)
class MainWindow(QMainWindow):
def __init__(self):
QMainWindow.__init__(self)
# Menu Bar
self.menu_bar = self.menuBar()
self.file_menu = self.menu_bar.addMenu("File")
self.edit_menu = self.menu_bar.addMenu("Edit")
self.view_menu = self.menu_bar.addMenu("View")
self.tools_menu = self.menu_bar.addMenu("Tools")
# Project Browser
self.project_dock = QDockWidget("Project", self)
self.project_dock.setFloating(False)
self.project_dock.setAllowedAreas(Qt.AllDockWidgetAreas)
self.project = QListWidget(self) # Mock Project Browser
self.project.addItem("main.py")
self.project.addItem("test.java")
self.project.addItem("stats.r")
self.project_dock.setWidget(self.project)
self.addDockWidget(Qt.LeftDockWidgetArea, self.project_dock)
# Workspace
self.workspace = QTabWidget()
self.workspace.setTabPosition(QTabWidget.South)
self.setCentralWidget(self.workspace)
# Editor
self.editor_tabs = EditorTabs()
self.workspace.addTab(self.editor_tabs, "Editor")
# Monitor
self.monitor = QWidget()
self.workspace.addTab(self.monitor, "Monitor")
# Jupyter Widget
self.jupyter_dock = QDockWidget("Jupyter", self)
self.jupyter_dock.setFloating(False)
self.jupyter_dock.setAllowedAreas(Qt.AllDockWidgetAreas)
self.jupyter = TabbedJupyterWidget()
self.jupyter_dock.setWidget(self.jupyter)
self.addDockWidget(Qt.RightDockWidgetArea, self.jupyter_dock)
# Window Properties
self.setWindowTitle("Mock Layout for Glia")
# Status Bar
self.status_bar = QStatusBar(self)
self.setStatusBar(self.status_bar)
def closeEvent(self, event):
"""
Finish up any tasks. Stop all running widgets, it's threads and
any I/O tasks.
"""
for child in self.findChildren(QObject):
if hasattr(child, "stop_running"):
child.stop_running()
class JetTrackerView(QWidget):
def __init__(self, context, signals, parent=None):
super(JetTrackerView, self).__init__(parent)
self.signals = signals
self.context = context
self.parent = parent
self.mainLayout = QHBoxLayout()
self.createGraphWidget()
self.createDockWidgets()
self.mainLayout.addWidget(self.controlsDock)
self.mainLayout.addWidget(self.graphWidget)
# self.parent.resizeDocks([self.controlsDock], [45], Qt.Horizontal)
print(self.parent)
self.setLayout(self.mainLayout)
def createGraphWidget(self):
self.graphWidget = GraphsWidget(context=self.context,
signals=self.signals)
self.graphWidget.setSizePolicy(QSizePolicy.Preferred,
QSizePolicy.Preferred)
def createDockWidgets(self):
self.parent.setDockNestingEnabled(True)
self.controlsDock = QDockWidget("Controls", self)
self.controlsDock.setAllowedAreas(Qt.RightDockWidgetArea
| Qt.BottomDockWidgetArea)
self.controlsDock.setFeatures(QDockWidget.DockWidgetFloatable)
self.controlsWidget = ControlsWidget(self.context, self.signals)
self.controlsDock.setWidget(self.controlsWidget)
self.controlsDock.setSizePolicy(QSizePolicy.Preferred,
QSizePolicy.Preferred)
def createDockWindows(self):
dock = QDockWidget("Log Files", self)
dock.setAllowedAreas(Qt.LeftDockWidgetArea | Qt.RightDockWidgetArea)
dock.setWidget(self.lastree.tree)
#
self.addDockWidget(Qt.LeftDockWidgetArea, dock)
self.set_category_button = QPushButton('Set Category', self)
self.slect_files_button = QPushButton(
'Select files for further process', self)
# self.layout.addWidget(self.logtree.tree)
dock = QDockWidget("Set", self)
btn_w = QWidget()
self.btn_layout = QVBoxLayout()
btn_w.setLayout(self.btn_layout)
dock.setWidget(btn_w)
self.btn_layout.addWidget(self.set_category_button)
self.btn_layout.addWidget(self.slect_files_button)
self.addDockWidget(Qt.LeftDockWidgetArea, dock)
dock = QDockWidget("Logs", self)
dock.setWidget(self.logtree.tree)
self.addDockWidget(Qt.LeftDockWidgetArea, dock)
self.set_category_button.clicked.connect(self.set_category)
self.slect_files_button.clicked.connect(self.retain4FurtherAnalysis)
def createDockWindows(self):
dock = QDockWidget("Archivo intermedio", self)
#dock.setAllowedAreas(Qt.LeftDockWidgetArea | Qt.RightDockWidgetArea)
self.customerList = QListWidget(dock)
dock.setWidget(self.customerList)
self.addDockWidget(Qt.RightDockWidgetArea, dock)
self.viewMenu.addAction(dock.toggleViewAction())
dock = QDockWidget("Tabla de símbolos", self)
self.paragraphsList = QListWidget(dock)
dock.setWidget(self.paragraphsList)
self.addDockWidget(Qt.RightDockWidgetArea, dock)
self.viewMenu.addAction(dock.toggleViewAction())
dock = QDockWidget("Errores", self)
dock.setAllowedAreas(Qt.BottomDockWidgetArea)
self.customerList = QListWidget(dock)
dock.setWidget(self.customerList)
self.addDockWidget(Qt.BottomDockWidgetArea, dock)
self.viewMenu.addAction(dock.toggleViewAction())
dock = QDockWidget("Código objeto", self)
#dock.setAllowedAreas(Qt.LeftDockWidgetArea | Qt.RightDockWidgetArea)
self.customerList = QListWidget(dock)
dock.setWidget(self.customerList)
self.addDockWidget(Qt.LeftDockWidgetArea, dock)
self.viewMenu.addAction(dock.toggleViewAction())
def init(self):
self.pic = Picture(self)
self.setCentralWidget(self.pic)
self.panel = Panel(self.pic)
self.dock = QDockWidget('info panel')
self.dock.setWidget(self.panel)
self.dock.setAllowedAreas(Qt.RightDockWidgetArea)
self.addDockWidget(Qt.RightDockWidgetArea, self.dock)
self.dock.setFeatures(QDockWidget.NoDockWidgetFeatures)
self.dock.setFixedWidth(300)
self.setWindowTitle('Untitled')
dock = QDockWidget('command line', self)
dock.setWidget(TwoLines())
dock.setAllowedAreas(Qt.BottomDockWidgetArea)
self.addDockWidget(Qt.BottomDockWidgetArea, dock)
dock.setFeatures(QDockWidget.NoDockWidgetFeatures)
dock.setFixedHeight(60)
dock.setFixedWidth(800)
desktop = QApplication.desktop()
self.setGeometry(300, 100, desktop.width(), desktop.height())
self.setFixedSize(1100, 705)
def createClipboard(self):
"""
Set up clipboard and dock widget to display text from
the clipboard.
"""
# Create dock widget
clipboard_dock = QDockWidget()
clipboard_dock.setWindowTitle("Display Clipboard Contents")
clipboard_dock.setAllowedAreas(Qt.TopDockWidgetArea)
dock_frame = QFrame()
self.cb_text = QTextEdit()
paste_button = QPushButton("Paste")
paste_button.clicked.connect(self.pasteText)
dock_v_box = QVBoxLayout()
dock_v_box.addWidget(self.cb_text)
dock_v_box.addWidget(paste_button)
# set the main layout for the dock widget,
# then set the main widget of the dock widget
dock_frame.setLayout(dock_v_box)
clipboard_dock.setWidget(dock_frame)
# set initial location of dock widget
self.addDockWidget(Qt.TopDockWidgetArea, clipboard_dock)
# Create instance of the clipboard
self.clipboard = QApplication.clipboard()
self.clipboard.dataChanged.connect(self.copyFromClipboard)
def addROI(self,roi = None):
if self.roiwidget is None:
self.roiwidget = ROIPlotWidget(roi_target = self.p1,
view = self.view,
parent = self)
roiTab = QDockWidget("roi cam {0}".format(self.iCam), self)
roiTab.setWidget(self.roiwidget)
roiTab.setAllowedAreas(Qt.LeftDockWidgetArea |
Qt.RightDockWidgetArea |
Qt.BottomDockWidgetArea |
Qt.TopDockWidgetArea)
roiTab.setFeatures(QDockWidget.DockWidgetMovable |
QDockWidget.DockWidgetFloatable |
QDockWidget.DockWidgetClosable)
self.parent.addDockWidget(Qt.BottomDockWidgetArea
,roiTab)
roiTab.setFloating(True)
roiTab.resize(600,150)
def closetab(ev):
# This probably does not clean up memory...
if not self.roiwidget is None:
[self.p1.removeItem(r)
for r in self.roiwidget.items()]
del self.roiwidget
self.roiwidget = None
ev.accept()
roiTab.closeEvent = closetab
self.roiwidget.add_roi(roi)
def __setup_sub_window_dock(self, window: QWidget, config: dict, sub_window_data: SimpleNamespace):
dock_name = config.get('DockName', '')
dock_area = config.get('DockArea', Qt.NoDockWidgetArea)
dock_show = config.get('DockShow', False)
dock_float = config.get('DockFloat', False)
dock_wnd = QDockWidget(dock_name, self)
dock_wnd.setAllowedAreas(
Qt.RightDockWidgetArea | Qt.LeftDockWidgetArea | Qt.TopDockWidgetArea | Qt.BottomDockWidgetArea)
# With this setting, the dock widget cannot be closed
# dock_wnd.setFeatures(QDockWidget.DockWidgetFloatable | QDockWidget.DockWidgetMovable)
if dock_area != Qt.NoDockWidgetArea:
if dock_area == Qt.AllDockWidgetAreas:
self.addDockWidget(Qt.TopDockWidgetArea, dock_wnd)
dock_wnd.setFloating(True)
dock_wnd.move(QApplication.desktop().screen().rect().center() - self.rect().center())
else:
self.addDockWidget(dock_area, dock_wnd)
else:
self.addDockWidget(Qt.TopDockWidgetArea, dock_wnd)
dock_wnd.setFloating(True)
dock_wnd.setAllowedAreas(Qt.NoDockWidgetArea)
dock_wnd.move(QApplication.desktop().screen().rect().center() - self.rect().center())
dock_wnd.setWidget(window)
if dock_float:
dock_wnd.setFloating(True)
# self.geometry().center() - dock_wnd.rect().center()
# dock_wnd.move()
if dock_show:
dock_wnd.show()
else:
dock_wnd.hide()
sub_window_data.dock_wnd = dock_wnd
def createDockWindows(self):
# 正常邮件部分
dock = QDockWidget("normal",self)
dock.setAllowedAreas(Qt.LeftDockWidgetArea | Qt.RightDockWidgetArea)
# 设置属性,
self.normalList = myListWidget(dock)
self.normalList.setDragEnabled(True)
self.normalList.setAcceptDrops(True)
# 添加列表内容
# 默认打开一些正常邮件，显示内容为主题，点击主题时，获得文件名，进而展现内容
self.normalSub = self.getSubject('normal')
self.normalList.addItems(self.normalSub)
dock.setWidget(self.normalList)
self.addDockWidget(Qt.RightDockWidgetArea, dock)
# 垃圾邮件部分
dock = QDockWidget("trash",self)
self.trashList = myListWidget(dock)
self.trashList.setDragEnabled(True)
self.trashList.setAcceptDrops(True)
self.trashSub = self.getSubject('trash')
self.trashList.addItems(self.trashSub)
dock.setWidget(self.trashList)
self.addDockWidget(Qt.RightDockWidgetArea, dock)
self.normalList.itemClicked.connect(self.normalShow)
self.trashList.itemClicked.connect(self.trashShow)
self.normalList.itemChanged.connect(self.normalChange)
self.trashList.itemChanged.connect(self.trashChange)
def createDockWindows(self):
dock = QDockWidget("Folders", self)
dock.setAllowedAreas(Qt.LeftDockWidgetArea | Qt.RightDockWidgetArea)
#Code to Create FileView Colums and FolderTree
self.FileView = QtWidgets.QColumnView()
self.FileView.setGeometry(QtCore.QRect(240, 10, 291, 281))
self.FolderTree = QtWidgets.QTreeView()
self.FolderTree.setGeometry(QtCore.QRect(10, 10, 221, 281))
FolderTree = self.FolderTree
#FolderTree.hidecolumn(1),... ?? to show only name column
#include FolderTree to a Dock at the left side
dock.setWidget(FolderTree)
self.addDockWidget(Qt.LeftDockWidgetArea, dock)
#set the model and rootpath for filling the FolderTree from self.ui
dirmodel = QFileSystemModel()
#set filter to show only folders
dirmodel.setFilter(QDir.NoDotAndDotDot | QDir.AllDirs)
dirmodel.setRootPath(rootpath)
#filemodel and filter for only files on right side
filemodel = QFileSystemModel()
filemodel.setFilter(QDir.NoDotAndDotDot | QDir.Files)
filemodel.setRootPath(rootpath)
FolderView = self.FolderTree
FolderView.setModel(dirmodel)
FolderView.setRootIndex(dirmodel.index(rootpath))
FileView = self.FileView
FileView.setModel(filemodel)
dock = QDockWidget("Files", self)
dock.setWidget(FileView)
self.addDockWidget(Qt.RightDockWidgetArea, dock)
#important lines for the connection, which does not work
self.FolderTree.clicked['QModelIndex'].connect(self.setpathonclick)
def createWidgets(self):
"""Cette fonction permet la création de tous les widgets de la
mainWindow"""
#Création toolbar
toolBar = self.addToolBar("Tools")
#Création bar recherche
self.lineEditSearch = QLineEdit()
self.lineEditSearch.setPlaceholderText("Recherche")
self.lineEditSearch.setStyleSheet("background-color:white")
toolBar.addWidget(self.lineEditSearch)
self.lineEditSearch.setMaximumWidth(300)
#Création séparateur
toolBar.addSeparator()
#Création icon add contact
self.actionAdd = QAction("Ajouter (Ctrl+P)",self)
toolBar.addAction(self.actionAdd)
self.actionAdd.setShortcut("Ctrl+P")
self.actionAdd.setIcon(QIcon("Pictures/sign.png"))
#Création icon delete contact
self.actionDelete = QAction("supprimer (Ctrl+D)",self)
toolBar.addAction(self.actionDelete)
self.actionDelete.setShortcut("Ctrl+D")
self.actionDelete.setIcon(QIcon("Pictures/contacts.png"))
#Création icon quit
self.actionQuitter = QAction("Quitter (Ctrl+Q)",self)
toolBar.addAction(self.actionQuitter)
self.actionQuitter.setShortcut("Ctrl+Q")
self.actionQuitter.setIcon(QIcon("Pictures/arrows.png"))
#Création widget central
self.centralWidget = QWidget()
self.centralWidget.setStyleSheet("background-color:white")
self.setCentralWidget(self.centralWidget)
#Création dockWidget left
dockDisplay = QDockWidget("Répertoire")
dockDisplay.setStyleSheet("background-color:white")
dockDisplay.setFeatures(QDockWidget.DockWidgetFloatable)
dockDisplay.setAllowedAreas(Qt.LeftDockWidgetArea |
Qt.RightDockWidgetArea)
self.addDockWidget(Qt.LeftDockWidgetArea,dockDisplay)
containDock = QWidget(dockDisplay)
dockDisplay.setWidget(containDock)
dockLayout = QVBoxLayout()
displayWidget = QScrollArea()
displayWidget.setWidgetResizable(1)
dockLayout.addWidget(displayWidget)
containDock.setLayout(dockLayout)
#Ajouter la list au dockwidget
self.listContact = QListWidget()
displayWidget.setWidget(self.listContact)
def createExperimentTasksVisualizationWgt(self):
dockWin = QDockWidget("Experiment Tasks Visualization", self)
dockWin.setAllowedAreas(Qt.LeftDockWidgetArea | Qt.RightDockWidgetArea)
self.wgtExperimentTasksVisualizer =
dockWin.setWidget(self.wgtExperimentTasksVisualizer)
# self.addDockWidget(Qt.NoDockWidgetArea, dockWin)
self.viewMenu.addAction(dockWin.toggleViewAction())
return dockWin
def createExperimentConsoleWgt(self):
dockWin = QDockWidget("Experiment Console", self)
dockWin.setAllowedAreas(Qt.LeftDockWidgetArea | Qt.RightDockWidgetArea)
self.wgtExperimentConsole = eco.ExperimentConsoleOutput()
dockWin.setWidget(self.wgtExperimentConsole)
# self.addDockWidget(Qt.NoDockWidgetArea, dockWin)
self.viewMenu.addAction(dockWin.toggleViewAction())
return dockWin
def createExperimentStatisticsPanelWgt(self):
dockWin = QDockWidget("Experiment Statistics Panel", self)
dockWin.setAllowedAreas(Qt.LeftDockWidgetArea | Qt.RightDockWidgetArea)
self.wgtExperimentStatisticsPanel = esp.ExperimentStatisticsPanel()
dockWin.setWidget(self.wgtExperimentStatisticsPanel)
self.addDockWidget(Qt.RightDockWidgetArea, dockWin)
self.viewMenu.addAction(dockWin.toggleViewAction())
return dockWin
def createFileViewerWgt(self):
dockWin = QDockWidget("File Viewer", self)
dockWin.setAllowedAreas(Qt.LeftDockWidgetArea | Qt.RightDockWidgetArea)
# self.wgtFileContentViewer = fcv.FileContentViewer()
# dockWin.setWidget(self.wgtFileContentViewer)
self.addDockWidget(Qt.LeftDockWidgetArea, dockWin)
self.viewMenu.addAction(dockWin.toggleViewAction())
return dockWin
def dockBottom(self, txt, widget):
dock = QDockWidget(txt, self)
self.addDockWidget(Qt.BottomDockWidgetArea, dock)
dock.setAllowedAreas(Qt.BottomDockWidgetArea)
dock.setWidget(widget)
if (self.bottomDock != None):
self.tabifyDockWidget(self.bottomDock, dock)
self.bottomDock = dock
def setupToolsDockWidget(self):
"""Set up the dock widget that displays different tools and themes for
interacting with the chart. Also displays the data values in a table view object."""
tools_dock = QDockWidget()
tools_dock.setWindowTitle("Tools")
tools_dock.setMinimumWidth(400)
tools_dock.setAllowedAreas(Qt.LeftDockWidgetArea | Qt.RightDockWidgetArea)
# Create widgets for dock widget area
themes_cb = QComboBox()
themes_cb.addItems(["Light", "Cerulean Blue", "Dark", "Sand Brown",
"NCS Blue", "High Contrast", "Icy Blue", "Qt"])
themes_cb.currentTextChanged.connect(self.changeChartTheme)
self.animations_cb = QComboBox()
self.animations_cb.addItem("No Animation", QChart.NoAnimation)
self.animations_cb.addItem("Grid Animation", QChart.GridAxisAnimations)
self.animations_cb.addItem("Series Animation", QChart.SeriesAnimations)
self.animations_cb.addItem("All Animations", QChart.AllAnimations)
self.animations_cb.currentIndexChanged.connect(self.changeAnimations)
self.legend_cb = QComboBox()
self.legend_cb.addItem("No Legend")
self.legend_cb.addItem("Align Left", Qt.AlignLeft)
self.legend_cb.addItem("Align Top", Qt.AlignTop)
self.legend_cb.addItem("Align Right", Qt.AlignRight)
self.legend_cb.addItem("Align Bottom", Qt.AlignBottom)
self.legend_cb.currentTextChanged.connect(self.changeLegend)
self.antialiasing_check_box = QCheckBox()
self.antialiasing_check_box.toggled.connect(self.toggleAntialiasing)
reset_button = QPushButton("Reset Chart Axes")
reset_button.clicked.connect(self.resetChartZoom)
# Create table view and set its model
data_table_view = QTableView()
data_table_view.setModel(self.model)
data_table_view.horizontalHeader().setSectionResizeMode(QHeaderView.Stretch)
data_table_view.verticalHeader().setSectionResizeMode(QHeaderView.Stretch)
dock_form = QFormLayout()
dock_form.setAlignment(Qt.AlignTop)
dock_form.addRow("Themes:", themes_cb)
dock_form.addRow("Animations:", self.animations_cb)
dock_form.addRow("Legend:", self.legend_cb)
dock_form.addRow("Anti-Aliasing", self.antialiasing_check_box)
dock_form.addRow(reset_button)
dock_form.addRow(data_table_view)
# Create QWidget object to act as a container for dock widgets
tools_container = QWidget()
tools_container.setLayout(dock_form)
tools_dock.setWidget(tools_container)
self.addDockWidget(Qt.LeftDockWidgetArea, tools_dock)
# Handles the visibility of the dock widget
self.toggle_dock_tools_act = tools_dock.toggleViewAction()
def testInPlotImage(self):
dock = QDockWidget("In plot image", self)
dock.setAllowedAreas(Qt.BottomDockWidgetArea)
dock.setWidget(self.inplot)
#self.treeView.setRootIsDecorated(False)
#self.treeView.setAlternatingRowColors(True)
#self.dock.setWidget(self.treeView)
self.addDockWidget(Qt.BottomDockWidgetArea, dock)
def __init__(self):
super().__init__()
self.data_dict = {}
self.mdi = QMdiArea()
self.setCentralWidget(self.mdi)
# self.mdi.resize(950,950)
bar = self.menuBar()
self.current_dir = None
self.opened_wd_names = []
file = bar.addMenu("File")
file.addAction("New")
file.addAction("cascade")
file.addAction("Tiled")
file.triggered[QAction].connect(self.WindowTrig)
load = bar.addMenu("Load")
load.addAction("2D")
load.addAction("3D")
load.triggered[QAction].connect(self.dir_open)
toolbar = QToolBar()
self.addToolBar(toolbar)
bw_button_action = QAction('base_wnd', self)
bw_button_action.setStatusTip('base window button')
bw_button_action.triggered.connect(self.onclicktb)
toolbar.addAction(bw_button_action)
self.setWindowTitle("MDI Application")
self.base_wd = QMdiSubWindow()
self.base_wd.setAttribute(Qt.WA_DeleteOnClose, False)
self.base_wd.resize(400, 400)
self.base_wd.plt_i = pg.PlotItem(labels={
'left': ('slits', 'degrees'),
'bottom': ('Kin. Energy', 'eV')
})
self.base_wd.plt_iv = pg.ImageView(view=self.base_wd.plt_i)
self.base_wd.setWidget(self.base_wd.plt_iv)
self.base_wd.setWindowTitle("plot window")
self.mdi.addSubWindow(self.base_wd)
self.base_wd.show()
data_DockWidget = QDockWidget('data', self)
data_DockWidget.setObjectName(('data window'))
data_DockWidget.setAllowedAreas(Qt.RightDockWidgetArea)
self.data_list = QListWidget()
data_DockWidget.setWidget(self.data_list)
self.addDockWidget(Qt.RightDockWidgetArea, data_DockWidget)
self.data_list.itemClicked.connect(self.show_data)
self.data_list.itemDoubleClicked.connect(self.get_data)
self.mdi.subWindowActivated.connect(self.get_data)
def addDock(self):
dock1 = QDockWidget('DockWidget')
dock1.setFeatures(QDockWidget.DockWidgetFloatable)
dock1.setAllowedAreas(Qt.LeftDockWidgetArea)
listwidget = QListWidget()
listwidget.addItems(self.items)
listwidget.currentRowChanged.connect(self.onDockListIndexChanged)
dock1.setWidget(listwidget)
self.addDockWidget(Qt.LeftDockWidgetArea, dock1)
def init_file_tree(self, directory, title, action, filtered=False):
widget = DirectoryDockWidget(directory, filtered=filtered, parent=self)
widget.path_label.addAction(action, QLineEdit.LeadingPosition)
widget.tree_view.activated.connect(
partial(self.handle_directory_tree_view_activated, directory))
dock = QDockWidget(title, self)
dock.setAllowedAreas(Qt.LeftDockWidgetArea | Qt.RightDockWidgetArea)
dock.setFeatures(QDockWidget.DockWidgetMovable)
dock.setWidget(widget)
self.addDockWidget(Qt.LeftDockWidgetArea, dock)
def init_file_list(self):
names = self.sweep_dict.keys()
self.file_list = FileList(names)
self.file_list.itemClicked.connect(self.set_new_sweep)
self.file_list.itemActivated.connect(self.set_new_sweep)
dock_widget = QDockWidget('Browser', self)
dock_widget.setWidget(self.file_list)
dock_widget.setAllowedAreas(QtCore.Qt.AllDockWidgetAreas)
self.addDockWidget(QtCore.Qt.BottomDockWidgetArea, dock_widget)
self.dock_widgets.append(dock_widget)
def createDockWidget(self):
""" Create Dock wudget to the right"""
# Set up dock widget
dock_widget = QDockWidget()
dock_widget.setWindowTitle("Example Dock")
dock_widget.setAllowedAreas(Qt.AllDockWidgetAreas)
# Set main widget for the dock widget
dock_widget.setWidget(QTextEdit())
# Set initial location of dock widget in main window
self.addDockWidget(Qt.LeftDockWidgetArea, dock_widget)
def add_view(self, name, widget,parent,first):
dock = QDockWidget(name, self)
dock.setAllowedAreas(Qt.AllDockWidgetAreas)
dock.setWidget(widget)
widget.show()
if first :
self.addDockWidget(Qt.TopDockWidgetArea, dock)
else :
self.tabifyDockWidget(parent,dock)
return dock
class SpadeMainWindow(QMainWindow):
"""Spade's main window."""
def __init__(self):
super().__init__()
self._init_ui()
self._create_central_widget()
self._create_projectview()
self._create_templateview()
def center(self):
"""Place the window in the center of the screen."""
qr = self.frameGeometry()
cp = QDesktopWidget().availableGeometry().center()
qr.moveCenter(cp)
self.move(qr.topLeft())
def _init_menubar(self):
"""Set up the menu bar."""
action_exit = QAction("Exit", self)
action_exit.setStatusTip("Exit application")
action_exit.triggered.connect(qApp.quit)
menubar = self.menuBar()
menu_file = menubar.addMenu("File")
menu_file.addAction(action_exit)
def _init_ui(self):
"""Set up main window attributes."""
self.resize(1200, 800)
self.center()
self.setWindowTitle("Spade")
self._init_menubar()
self.statusBar().showMessage("Ready")
def _create_central_widget(self):
"""Set up the central widget."""
self.central_widget = EditorWidget()
self.setCentralWidget(self.central_widget)
def _create_projectview(self):
"""Spawn projectview."""
self.dock_projectview = QDockWidget()
self.dock_projectview.setAllowedAreas(Qt.LeftDockWidgetArea
| Qt.RightDockWidgetArea)
self.dock_projectview.setWidget(QTextEdit())
self.addDockWidget(Qt.LeftDockWidgetArea, self.dock_projectview)
def _create_templateview(self):
"""Spawn templateview."""
self.dock_templateview = QDockWidget()
self.dock_templateview.setAllowedAreas(Qt.LeftDockWidgetArea
| Qt.RightDockWidgetArea
| Qt.BottomDockWidgetArea)
self.dock_templateview.setWidget(QTextEdit())
self.addDockWidget(Qt.BottomDockWidgetArea, self.dock_templateview)
class Main(QMainWindow):
def __init__(self):
super(Main, self).__init__()
self.layout = MainWidget()
self.layout.MainSig.connect(self.__addTable)
self.TableWid = ShowDBWidget()
self.setCentralWidget(self.layout)
self.__initUI()
def __addTable(self, path):
self.TableWid = ShowDBWidget(path)
self.TableDock = QDockWidget("Tables", self)
self.TableDock.setWidget(self.TableWid)
self.TableDock.setMinimumSize(500, 500)
self.TableDock.setAllowedAreas(Qt.AllDockWidgetAreas)
self.addDockWidget(Qt.RightDockWidgetArea, self.TableDock, Qt.Horizontal)
self.TableWid.TableSig.connect(self.__addSub)
def __addSub(self, path, name):
self.SubTableWid = ShowDBSubWidget(path, name)
self.SubTableDock = QDockWidget("Elements", self)
self.SubTableDock.setWidget(self.SubTableWid)
self.SubTableDock.setMinimumSize(1000, 500)
self.SubTableDock.setAllowedAreas(Qt.AllDockWidgetAreas)
self.addDockWidget(Qt.RightDockWidgetArea, self.SubTableDock, Qt.Horizontal)
def __initUI(self):
menubar = self.menuBar()
deleteAct = QAction('Delete', self)
deleteAct.setShortcut('Delete')
deleteAct.triggered.connect(self.layout.clickedDelete)
clearAct = QAction('Clear', self)
clearAct.setShortcut('Ctrl+W')
clearAct.triggered.connect(self.layout.clickedClear)
addAct = QAction('Add', self)
addAct.setShortcut('Ctrl+O')
addAct.triggered.connect(self.layout.clickedAdd)
exitAct = QAction('Exit', self)
exitAct.setShortcut('Esc')
exitAct.triggered.connect(self.layout.clickedExit)
fileMenu = menubar.addMenu('&File')
fileMenu.addAction(addAct)
fileMenu.addAction(deleteAct)
fileMenu.addAction(clearAct)
fileMenu.addAction(exitAct)
self.setGeometry(1000, 500, 2000, 800)
def createFitnessFunctionVisualizationWgt(self):
dockWin = QDockWidget("Fitness Function Visualization", self)
dockWin.setAllowedAreas(Qt.LeftDockWidgetArea | Qt.RightDockWidgetArea)
self.wgtFitnessFunctionVisualizer = QListWidget(dockWin)
self.wgtFitnessFunctionVisualizer.addItems((
"File 1",
"File 2"))
dockWin.setWidget(self.wgtFitnessFunctionVisualizer)
# self.addDockWidget(Qt.NoDockWidgetArea, dockWin)
self.viewMenu.addAction(dockWin.toggleViewAction())
return dockWin
def createDockStats(self):
dock = QDockWidget('stats',self)
dock.setAllowedAreas(Qt.TopDockWidgetArea)
dock.setFeatures(dock.DockWidgetClosable|dock.DockWidgetVerticalTitleBar)
self.statsui = StatsWin(dock,cur=self)
self.statsui.setMaximumHeight(100)
dock.setWidget(self.statsui)
self.addDockWidget(Qt.TopDockWidgetArea, dock)
a = dock.toggleViewAction()
self.viewMenu.addAction(a)
a.setEnabled(True)
def createDockWindows(self):
# dock for project files
dock = QDockWidget("Project", self)
dock.setAllowedAreas(Qt.LeftDockWidgetArea | Qt.RightDockWidgetArea)
self.projectTreeView= TreeView(dock)
dock.setWidget(self.projectTreeView)
self.addDockWidget(Qt.LeftDockWidgetArea, dock)
self.viewMenu.addAction(dock.toggleViewAction())
# dock for html preview
dock = QDockWidget("Preview", self)
dock.setAllowedAreas(Qt.LeftDockWidgetArea | Qt.RightDockWidgetArea)
self.previewView= HtmlView(dock)
dock.setWidget(self.previewView)
self.addDockWidget(Qt.RightDockWidgetArea, dock)
self.viewMenu.addAction(dock.toggleViewAction())
def createDockWindows(self):
dock = QDockWidget("Customers", self)
dock.setAllowedAreas(Qt.LeftDockWidgetArea | Qt.RightDockWidgetArea)
self.customerList = QListWidget(dock)
self.customerList.addItems((
"John Doe, Harmony Enterprises, 12 Lakeside, Ambleton",
"Jane Doe, Memorabilia, 23 Watersedge, Beaton",
"Tammy Shea, Tiblanka, 38 Sea Views, Carlton",
"Tim Sheen, Caraba Gifts, 48 Ocean Way, Deal",
"Sol Harvey, Chicos Coffee, 53 New Springs, Eccleston",
"Sally Hobart, Tiroli Tea, 67 Long River, Fedula"))
dock.setWidget(self.customerList)
self.addDockWidget(Qt.RightDockWidgetArea, dock)
self.viewMenu.addAction(dock.toggleViewAction())
dock = QDockWidget("Paragraphs", self)
self.paragraphsList = QListWidget(dock)
self.paragraphsList.addItems((
"Thank you for your payment which we have received today.",
"Your order has been dispatched and should be with you within "
"28 days.",
"We have dispatched those items that were in stock. The rest of "
"your order will be dispatched once all the remaining items "
"have arrived at our warehouse. No additional shipping "
"charges will be made.",
"You made a small overpayment (less than $5) which we will keep "
"on account for you, or return at your request.",
"You made a small underpayment (less than $1), but we have sent "
"your order anyway. We'll add this underpayment to your next "
"bill.",
"Unfortunately you did not send enough money. Please remit an "
"additional $. Your order will be dispatched as soon as the "
"complete amount has been received.",
"You made an overpayment (more than $5). Do you wish to buy more "
"items, or should we return the excess to you?"))
dock.setWidget(self.paragraphsList)
self.addDockWidget(Qt.RightDockWidgetArea, dock)
self.viewMenu.addAction(dock.toggleViewAction())
self.customerList.currentTextChanged.connect(self.insertCustomer)
self.paragraphsList.currentTextChanged.connect(self.addParagraph)
def __init__(self,mainwin):
te = QPlainTextEdit()
hilighter = hilite.Highlighter(te.document())
qd = QDockWidget("Dae:Xgm")
qd.setWidget(te)
qd.setMinimumSize(480,240)
qd.setFeatures(QDockWidget.DockWidgetMovable|QDockWidget.DockWidgetVerticalTitleBar|QDockWidget.DockWidgetFloatable)
qd.setAllowedAreas(Qt.LeftDockWidgetArea)
qdss = "QWidget{background-color: rgb(64,64,128); color: rgb(160,160,192);}"
qdss += "QDockWidget::title {background-color: rgb(32,32,48); color: rgb(255,0,0);}"
qd.setStyleSheet(qdss)
mainwin.addDockWidget(Qt.LeftDockWidgetArea,qd)
if mainwin.prevDockWidget!=None:
mainwin.tabifyDockWidget(mainwin.prevDockWidget,qd)
mainwin.prevDockWidget = qd
self.stdout = ""
self.stderr = ""
def onSubProcStdout():
bytes = self.process.readAllStandardOutput()
self.stdout += str(bytes, encoding='ascii')
te.setPlainText(self.stdout+self.stderr)
def onSubProcStderr():
bytes = self.process.readAllStandardError()
self.stderr += str(bytes, encoding='ascii')
te.setPlainText(self.stdout+self.stderr)
def finished(text):
print( "process done...\n")
self.process = QProcess()
self.process.readyReadStandardError.connect(onSubProcStderr)
self.process.readyReadStandardOutput.connect(onSubProcStdout);
self.process.finished.connect(finished);
self.process.start(cmd)
def createDockWindows(self):
dock = QDockWidget("Sensors", self)
dock.setAllowedAreas(Qt.LeftDockWidgetArea | Qt.RightDockWidgetArea)
self.sensors= Sensors(dock)
dock.setWidget(self.sensors)
self.addDockWidget(Qt.RightDockWidgetArea, dock)
self.viewMenu.addAction(dock.toggleViewAction())
dock = QDockWidget("Environment", self)
dock.setAllowedAreas(Qt.LeftDockWidgetArea | Qt.RightDockWidgetArea)
self.environmentList = QListWidget(dock)
self.environmentList.addItems((
"Omnidirectional Sensor Networks",
"Directional Sensor Networks",
"Directional Path Tracking",
"Big Target Coverage"))
dock.setWidget(self.environmentList)
self.addDockWidget(Qt.RightDockWidgetArea, dock)
self.viewMenu.addAction(dock.toggleViewAction())
dock = QDockWidget("Simulation", self)
dock.setAllowedAreas(Qt.LeftDockWidgetArea | Qt.RightDockWidgetArea)
self.simulation= Simulation(dock)
dock.setWidget(self.simulation)
self.addDockWidget(Qt.LeftDockWidgetArea, dock)
self.viewMenu.addAction(dock.toggleViewAction())
dock = QDockWidget("Console", self)
dock.setAllowedAreas(Qt.LeftDockWidgetArea | Qt.RightDockWidgetArea)
self.console= Console(dock)
dock.setWidget(self.console)
self.addDockWidget(Qt.LeftDockWidgetArea, dock)
self.viewMenu.addAction(dock.toggleViewAction())
self.console.applyButton.clicked.connect(self.applyButtonState)
self.console.playButton.clicked.connect(self.playButtonState)
self.console.pauseButton.clicked.connect(self.pauseButtonState)
self.environmentList.currentTextChanged.connect(self.changeEnvironment)
class Window(QMainWindow):
"""
Defines the look and characteristics of the application's main window.
"""
title = _("Mu {}").format(__version__)
icon = "icon"
timer = None
usb_checker = None
serial = None
repl = None
plotter = None
_zoom_in = pyqtSignal(int)
_zoom_out = pyqtSignal(int)
close_serial = pyqtSignal()
write_to_serial = pyqtSignal(bytes)
data_received = pyqtSignal(bytes)
def zoom_in(self):
"""
Handles zooming in.
"""
self._zoom_in.emit(2)
def zoom_out(self):
"""
Handles zooming out.
"""
self._zoom_out.emit(2)
def connect_zoom(self, widget):
"""
Connects a referenced widget to the zoom related signals.
"""
self._zoom_in.connect(widget.zoomIn)
self._zoom_out.connect(widget.zoomOut)
@property
def current_tab(self):
"""
Returns the currently focussed tab.
"""
return self.tabs.currentWidget()
def set_read_only(self, is_readonly):
"""
Set all tabs read-only.
"""
self.read_only_tabs = is_readonly
for tab in self.widgets:
tab.setReadOnly(is_readonly)
def get_load_path(self, folder):
"""
Displays a dialog for selecting a file to load. Returns the selected
path. Defaults to start in the referenced folder.
"""
path, _ = QFileDialog.getOpenFileName(self.widget, 'Open file', folder,
'*.py *.PY *.hex')
logger.debug('Getting load path: {}'.format(path))
return path
def get_save_path(self, folder):
"""
Displays a dialog for selecting a file to save. Returns the selected
path. Defaults to start in the referenced folder.
"""
path, _ = QFileDialog.getSaveFileName(self.widget, 'Save file', folder)
logger.debug('Getting save path: {}'.format(path))
return path
def get_microbit_path(self, folder):
"""
Displays a dialog for locating the location of the BBC micro:bit in the
host computer's filesystem. Returns the selected path. Defaults to
start in the referenced folder.
"""
path = QFileDialog.getExistingDirectory(self.widget,
'Locate BBC micro:bit', folder,
QFileDialog.ShowDirsOnly)
logger.debug('Getting micro:bit path: {}'.format(path))
return path
def add_tab(self, path, text, api):
"""
Adds a tab with the referenced path and text to the editor.
"""
new_tab = EditorPane(path, text)
new_tab.connect_margin(self.breakpoint_toggle)
new_tab_index = self.tabs.addTab(new_tab, new_tab.label)
new_tab.set_api(api)
@new_tab.modificationChanged.connect
def on_modified():
modified_tab_index = self.tabs.currentIndex()
self.tabs.setTabText(modified_tab_index, new_tab.label)
self.update_title(new_tab.label)
self.tabs.setCurrentIndex(new_tab_index)
self.connect_zoom(new_tab)
self.set_theme(self.theme)
new_tab.setFocus()
if self.read_only_tabs:
new_tab.setReadOnly(self.read_only_tabs)
def focus_tab(self, tab):
index = self.tabs.indexOf(tab)
self.tabs.setCurrentIndex(index)
tab.setFocus()
@property
def tab_count(self):
"""
Returns the number of active tabs.
"""
return self.tabs.count()
@property
def widgets(self):
"""
Returns a list of references to the widgets representing tabs in the
editor.
"""
return [self.tabs.widget(i) for i in range(self.tab_count)]
@property
def modified(self):
"""
Returns a boolean indication if there are any modified tabs in the
editor.
"""
for widget in self.widgets:
if widget.isModified():
return True
return False
def on_serial_read(self):
"""
Called when the connected device is ready to send data via the serial
connection. It reads all the available data, emits the data_received
signal with the received bytes and, if appropriate, emits the
tuple_received signal with the tuple created from the bytes received.
"""
data = bytes(self.serial.readAll()) # get all the available bytes.
self.data_received.emit(data)
def open_serial_link(self, port):
"""
Creates a new serial link instance.
"""
self.input_buffer = []
self.serial = QSerialPort()
self.serial.setPortName(port)
if self.serial.open(QIODevice.ReadWrite):
self.serial.dataTerminalReady = True
if not self.serial.isDataTerminalReady():
# Using pyserial as a 'hack' to open the port and set DTR
# as QtSerial does not seem to work on some Windows :(
# See issues #281 and #302 for details.
self.serial.close()
pyser = serial.Serial(port) # open serial port w/pyserial
pyser.dtr = True
pyser.close()
self.serial.open(QIODevice.ReadWrite)
self.serial.setBaudRate(115200)
self.serial.readyRead.connect(self.on_serial_read)
else:
raise IOError("Cannot connect to device on port {}".format(port))
def close_serial_link(self):
"""
Close and clean up the currently open serial link.
"""
self.serial.close()
self.serial = None
def add_filesystem(self, home, file_manager):
"""
Adds the file system pane to the application.
"""
self.fs_pane = FileSystemPane(home)
self.fs = QDockWidget(_('Filesystem on micro:bit'))
self.fs.setWidget(self.fs_pane)
self.fs.setFeatures(QDockWidget.DockWidgetMovable)
self.fs.setAllowedAreas(Qt.BottomDockWidgetArea)
self.addDockWidget(Qt.BottomDockWidgetArea, self.fs)
self.fs_pane.setFocus()
file_manager.on_list_files.connect(self.fs_pane.on_ls)
self.fs_pane.list_files.connect(file_manager.ls)
self.fs_pane.microbit_fs.put.connect(file_manager.put)
self.fs_pane.microbit_fs.delete.connect(file_manager.delete)
self.fs_pane.microbit_fs.list_files.connect(file_manager.ls)
self.fs_pane.local_fs.get.connect(file_manager.get)
self.fs_pane.local_fs.list_files.connect(file_manager.ls)
file_manager.on_put_file.connect(self.fs_pane.microbit_fs.on_put)
file_manager.on_delete_file.connect(self.fs_pane.microbit_fs.on_delete)
file_manager.on_get_file.connect(self.fs_pane.local_fs.on_get)
file_manager.on_list_fail.connect(self.fs_pane.on_ls_fail)
file_manager.on_put_fail.connect(self.fs_pane.on_put_fail)
file_manager.on_delete_fail.connect(self.fs_pane.on_delete_fail)
file_manager.on_get_fail.connect(self.fs_pane.on_get_fail)
self.connect_zoom(self.fs_pane)
return self.fs_pane
def add_micropython_repl(self, port, name):
"""
Adds a MicroPython based REPL pane to the application.
"""
if not self.serial:
self.open_serial_link(port)
# Send a Control-C / keyboard interrupt.
self.serial.write(b'\x03')
repl_pane = MicroPythonREPLPane(serial=self.serial, theme=self.theme)
self.data_received.connect(repl_pane.process_bytes)
self.add_repl(repl_pane, name)
def add_micropython_plotter(self, port, name):
"""
Adds a plotter that reads data from a serial connection.
"""
if not self.serial:
self.open_serial_link(port)
plotter_pane = PlotterPane(theme=self.theme)
self.data_received.connect(plotter_pane.process_bytes)
self.add_plotter(plotter_pane, name)
def add_jupyter_repl(self, kernel_manager, kernel_client):
"""
Adds a Jupyter based REPL pane to the application.
"""
kernel_manager.kernel.gui = 'qt4'
kernel_client.start_channels()
ipython_widget = JupyterREPLPane(theme=self.theme)
ipython_widget.kernel_manager = kernel_manager
ipython_widget.kernel_client = kernel_client
self.add_repl(ipython_widget, _('Python3 (Jupyter)'))
def add_repl(self, repl_pane, name):
"""
Adds the referenced REPL pane to the application.
"""
self.repl_pane = repl_pane
self.repl = QDockWidget(_('{} REPL').format(name))
self.repl.setWidget(repl_pane)
self.repl.setFeatures(QDockWidget.DockWidgetMovable)
self.repl.setAllowedAreas(Qt.BottomDockWidgetArea |
Qt.LeftDockWidgetArea |
Qt.RightDockWidgetArea)
self.addDockWidget(Qt.BottomDockWidgetArea, self.repl)
self.connect_zoom(self.repl_pane)
self.repl_pane.set_theme(self.theme)
self.repl_pane.setFocus()
def add_plotter(self, plotter_pane, name):
"""
Adds the referenced plotter pane to the application.
"""
self.plotter_pane = plotter_pane
self.plotter = QDockWidget(_('{} Plotter').format(name))
self.plotter.setWidget(plotter_pane)
self.plotter.setFeatures(QDockWidget.DockWidgetMovable)
self.plotter.setAllowedAreas(Qt.BottomDockWidgetArea |
Qt.LeftDockWidgetArea |
Qt.RightDockWidgetArea)
self.addDockWidget(Qt.BottomDockWidgetArea, self.plotter)
self.plotter_pane.set_theme(self.theme)
self.plotter_pane.setFocus()
def add_python3_runner(self, script_name, working_directory,
interactive=False, debugger=False,
command_args=None, runner=None):
"""
Display console output for the referenced Python script.
The script will be run within the workspace_path directory.
If interactive is True (default is False) the Python process will
run in interactive mode (dropping the user into the REPL when the
script completes).
If debugger is True (default is False) the script will be run within
a debug runner session. The debugger overrides the interactive flag
(you cannot run the debugger in interactive mode).
If there is a list of command_args (the default is None) then these
will be passed as further arguments into the command run in the
new process.
If runner is give, this is used as the command to start the Python
process.
"""
self.process_runner = PythonProcessPane(self)
self.runner = QDockWidget(_("Running: {}").format(
os.path.basename(script_name)))
self.runner.setWidget(self.process_runner)
self.runner.setFeatures(QDockWidget.DockWidgetMovable)
self.runner.setAllowedAreas(Qt.BottomDockWidgetArea |
Qt.LeftDockWidgetArea |
Qt.RightDockWidgetArea)
self.addDockWidget(Qt.BottomDockWidgetArea, self.runner)
self.process_runner.start_process(script_name, working_directory,
interactive, debugger, command_args,
runner)
self.process_runner.setFocus()
self.connect_zoom(self.process_runner)
return self.process_runner
def add_debug_inspector(self):
"""
Display a debug inspector to view the call stack.
"""
self.debug_inspector = DebugInspector()
self.debug_model = QStandardItemModel()
self.debug_inspector.setModel(self.debug_model)
self.debug_inspector.setUniformRowHeights(True)
self.inspector = QDockWidget(_('Debug Inspector'))
self.inspector.setWidget(self.debug_inspector)
self.inspector.setFeatures(QDockWidget.DockWidgetMovable)
self.inspector.setAllowedAreas(Qt.BottomDockWidgetArea |
Qt.LeftDockWidgetArea |
Qt.RightDockWidgetArea)
self.addDockWidget(Qt.RightDockWidgetArea, self.inspector)
self.connect_zoom(self.debug_inspector)
def update_debug_inspector(self, locals_dict):
"""
Given the contents of a dict representation of the locals in the
current stack frame, update the debug inspector with the new values.
"""
excluded_names = ['__builtins__', '__debug_code__',
'__debug_script__', ]
names = sorted([x for x in locals_dict if x not in excluded_names])
self.debug_model.clear()
self.debug_model.setHorizontalHeaderLabels([_('Name'), _('Value'), ])
for name in names:
try:
# DANGER!
val = eval(locals_dict[name])
except Exception:
val = None
if isinstance(val, list):
# Show a list consisting of rows of position/value
list_item = QStandardItem(name)
for i, i_val in enumerate(val):
list_item.appendRow([
QStandardItem(str(i)),
QStandardItem(repr(i_val))
])
self.debug_model.appendRow([
list_item,
QStandardItem(_('(A list of {} items.)').format(len(val)))
])
elif isinstance(val, dict):
# Show a dict consisting of rows of key/value pairs.
dict_item = QStandardItem(name)
for k, k_val in val.items():
dict_item.appendRow([
QStandardItem(repr(k)),
QStandardItem(repr(k_val))
])
self.debug_model.appendRow([
dict_item,
QStandardItem(_('(A dict of {} items.)').format(len(val)))
])
else:
self.debug_model.appendRow([
QStandardItem(name),
QStandardItem(locals_dict[name]),
])
def remove_filesystem(self):
"""
Removes the file system pane from the application.
"""
if hasattr(self, 'fs') and self.fs:
self.fs_pane = None
self.fs.setParent(None)
self.fs.deleteLater()
self.fs = None
def remove_repl(self):
"""
Removes the REPL pane from the application.
"""
if self.repl:
self.repl_pane = None
self.repl.setParent(None)
self.repl.deleteLater()
self.repl = None
if not self.plotter:
self.serial = None
def remove_plotter(self):
"""
Removes the plotter pane from the application.
"""
if self.plotter:
self.plotter_pane = None
self.plotter.setParent(None)
self.plotter.deleteLater()
self.plotter = None
if not self.repl:
self.serial = None
def remove_python_runner(self):
"""
Removes the runner pane from the application.
"""
if hasattr(self, 'runner') and self.runner:
self.process_runner = None
self.runner.setParent(None)
self.runner.deleteLater()
self.runner = None
def remove_debug_inspector(self):
"""
Removes the debug inspector pane from the application.
"""
if hasattr(self, 'inspector') and self.inspector:
self.debug_inspector = None
self.debug_model = None
self.inspector.setParent(None)
self.inspector.deleteLater()
self.inspector = None
def set_theme(self, theme):
"""
Sets the theme for the REPL and editor tabs.
"""
self.theme = theme
if theme == 'contrast':
self.setStyleSheet(CONTRAST_STYLE)
new_theme = ContrastTheme
new_icon = 'theme_day'
elif theme == 'night':
new_theme = NightTheme
new_icon = 'theme_contrast'
self.setStyleSheet(NIGHT_STYLE)
else:
self.setStyleSheet(DAY_STYLE)
new_theme = DayTheme
new_icon = 'theme'
for widget in self.widgets:
widget.set_theme(new_theme)
self.button_bar.slots['theme'].setIcon(load_icon(new_icon))
if hasattr(self, 'repl') and self.repl:
self.repl_pane.set_theme(theme)
if hasattr(self, 'plotter') and self.plotter:
self.plotter_pane.set_theme(theme)
def show_logs(self, log, theme):
"""
Display the referenced content of the log.
"""
log_box = LogDisplay()
log_box.setup(log, theme)
log_box.exec()
def show_message(self, message, information=None, icon=None):
"""
Displays a modal message to the user.
If information is passed in this will be set as the additional
informative text in the modal dialog.
Since this mechanism will be used mainly for warning users that
something is awry the default icon is set to "Warning". It's possible
to override the icon to one of the following settings: NoIcon,
Question, Information, Warning or Critical.
"""
message_box = QMessageBox(self)
message_box.setText(message)
message_box.setWindowTitle('Mu')
if information:
message_box.setInformativeText(information)
if icon and hasattr(message_box, icon):
message_box.setIcon(getattr(message_box, icon))
else:
message_box.setIcon(message_box.Warning)
logger.debug(message)
logger.debug(information)
message_box.exec()
def show_confirmation(self, message, information=None, icon=None):
"""
Displays a modal message to the user to which they need to confirm or
cancel.
If information is passed in this will be set as the additional
informative text in the modal dialog.
Since this mechanism will be used mainly for warning users that
something is awry the default icon is set to "Warning". It's possible
to override the icon to one of the following settings: NoIcon,
Question, Information, Warning or Critical.
"""
message_box = QMessageBox()
message_box.setText(message)
message_box.setWindowTitle(_('Mu'))
if information:
message_box.setInformativeText(information)
if icon and hasattr(message_box, icon):
message_box.setIcon(getattr(message_box, icon))
else:
message_box.setIcon(message_box.Warning)
message_box.setStandardButtons(message_box.Cancel | message_box.Ok)
message_box.setDefaultButton(message_box.Cancel)
logger.debug(message)
logger.debug(information)
return message_box.exec()
def update_title(self, filename=None):
"""
Updates the title bar of the application. If a filename (representing
the name of the file currently the focus of the editor) is supplied,
append it to the end of the title.
"""
title = self.title
if filename:
title += ' - ' + filename
self.setWindowTitle(title)
def autosize_window(self):
"""
Makes the editor 80% of the width*height of the screen and centres it.
"""
screen = QDesktopWidget().screenGeometry()
w = int(screen.width() * 0.8)
h = int(screen.height() * 0.8)
self.resize(w, h)
size = self.geometry()
self.move((screen.width() - size.width()) / 2,
(screen.height() - size.height()) / 2)
def reset_annotations(self):
"""
Resets the state of annotations on the current tab.
"""
self.current_tab.reset_annotations()
def annotate_code(self, feedback, annotation_type):
"""
Given a list of annotations about the code in the current tab, add
the annotations to the editor window so the user can make appropriate
changes.
"""
self.current_tab.annotate_code(feedback, annotation_type)
def show_annotations(self):
"""
Show the annotations added to the current tab.
"""
self.current_tab.show_annotations()
def setup(self, breakpoint_toggle, theme):
"""
Sets up the window.
Defines the various attributes of the window and defines how the user
interface is laid out.
"""
self.theme = theme
self.breakpoint_toggle = breakpoint_toggle
# Give the window a default icon, title and minimum size.
self.setWindowIcon(load_icon(self.icon))
self.update_title()
self.read_only_tabs = False
self.setMinimumSize(800, 400)
self.widget = QWidget()
widget_layout = QVBoxLayout()
self.widget.setLayout(widget_layout)
self.button_bar = ButtonBar(self.widget)
self.tabs = FileTabs()
self.tabs.setMovable(True)
self.setCentralWidget(self.tabs)
self.status_bar = StatusBar(parent=self)
self.setStatusBar(self.status_bar)
self.addToolBar(self.button_bar)
self.show()
self.autosize_window()
def resizeEvent(self, resizeEvent):
"""
Respond to window getting too small for the button bar to fit well.
"""
size = resizeEvent.size()
self.button_bar.set_responsive_mode(size.width(), size.height())
def select_mode(self, modes, current_mode, theme):
"""
Display the mode selector dialog and return the result.
"""
mode_select = ModeSelector()
mode_select.setup(modes, current_mode, theme)
mode_select.exec()
try:
return mode_select.get_mode()
except Exception as ex:
return None
def change_mode(self, mode):
"""
Given a an object representing a mode, recreates the button bar with
the expected functionality.
"""
self.button_bar.change_mode(mode)
# Update the autocomplete / tooltip APIs for each tab to the new mode.
api = mode.api()
for widget in self.widgets:
widget.set_api(api)
def set_usb_checker(self, duration, callback):
"""
Sets up a timer that polls for USB changes via the "callback" every
"duration" seconds.
"""
self.usb_checker = QTimer()
self.usb_checker.timeout.connect(callback)
self.usb_checker.start(duration * 1000)
def set_timer(self, duration, callback):
"""
Set a repeating timer to call "callback" every "duration" seconds.
"""
self.timer = QTimer()
self.timer.timeout.connect(callback)
self.timer.start(duration * 1000) # Measured in milliseconds.
def stop_timer(self):
"""
Stop the repeating timer.
"""
if self.timer:
self.timer.stop()
self.timer = None
def connect_tab_rename(self, handler, shortcut):
"""
Connect the double-click event on a tab and the keyboard shortcut to
the referenced handler (causing the Save As dialog).
"""
self.tabs.shortcut = QShortcut(QKeySequence(shortcut), self)
self.tabs.shortcut.activated.connect(handler)
self.tabs.tabBarDoubleClicked.connect(handler)
def open_directory_from_os(self, path):
"""
Given the path to a directoy, open the OS's built in filesystem
explorer for that path. Works with Windows, OSX and Linux.
"""
if sys.platform == 'win32':
# Windows
os.startfile(path)
elif sys.platform == 'darwin':
# OSX
os.system('open "{}"'.format(path))
else:
# Assume freedesktop.org on unix-y.
os.system('xdg-open "{}"'.format(path))
def create_widgets(MAIN):
"""Create all the widgets and dockwidgets. It also creates actions to
toggle views of dockwidgets in dockwidgets.
"""
""" ------ CREATE WIDGETS ------ """
MAIN.labels = Labels(MAIN)
MAIN.channels = Channels(MAIN)
MAIN.notes = Notes(MAIN)
MAIN.overview = Overview(MAIN)
MAIN.spectrum = Spectrum(MAIN)
MAIN.traces = Traces(MAIN)
MAIN.video = Video(MAIN)
MAIN.settings = Settings(MAIN) # depends on all widgets apart from Info
MAIN.info = Info(MAIN) # this has to be the last, it depends on settings
MAIN.setCentralWidget(MAIN.traces)
""" ------ LIST DOCKWIDGETS ------ """
new_docks = [{'name': 'Information',
'widget': MAIN.info,
'main_area': Qt.LeftDockWidgetArea,
'extra_area': Qt.RightDockWidgetArea,
},
{'name': 'Labels',
'widget': MAIN.labels,
'main_area': Qt.RightDockWidgetArea,
'extra_area': Qt.LeftDockWidgetArea,
},
{'name': 'Channels',
'widget': MAIN.channels,
'main_area': Qt.RightDockWidgetArea,
'extra_area': Qt.LeftDockWidgetArea,
},
{'name': 'Spectrum',
'widget': MAIN.spectrum,
'main_area': Qt.RightDockWidgetArea,
'extra_area': Qt.LeftDockWidgetArea,
},
{'name': 'Annotations',
'widget': MAIN.notes,
'main_area': Qt.LeftDockWidgetArea,
'extra_area': Qt.RightDockWidgetArea,
},
{'name': 'Video',
'widget': MAIN.video,
'main_area': Qt.LeftDockWidgetArea,
'extra_area': Qt.RightDockWidgetArea,
},
{'name': 'Overview',
'widget': MAIN.overview,
'main_area': Qt.BottomDockWidgetArea,
'extra_area': Qt.TopDockWidgetArea,
},
]
""" ------ CREATE DOCKWIDGETS ------ """
idx_docks = {}
actions = MAIN.action
actions['dockwidgets'] = []
for dock in new_docks:
dockwidget = QDockWidget(dock['name'], MAIN)
dockwidget.setWidget(dock['widget'])
dockwidget.setAllowedAreas(dock['main_area'] | dock['extra_area'])
dockwidget.setObjectName(dock['name']) # savestate
idx_docks[dock['name']] = dockwidget
MAIN.addDockWidget(dock['main_area'], dockwidget)
dockwidget_action = dockwidget.toggleViewAction()
dockwidget_action.setIcon(QIcon(ICON['widget']))
actions['dockwidgets'].append(dockwidget_action)
""" ------ ORGANIZE DOCKWIDGETS ------ """
MAIN.tabifyDockWidget(idx_docks['Information'],
idx_docks['Video'])
MAIN.tabifyDockWidget(idx_docks['Channels'],
idx_docks['Labels'])
idx_docks['Information'].raise_()
class DocumentController():
"""
Connects UI buttons to their corresponding actions in the model.
"""
### INIT METHODS ###
def __init__(self, document):
"""docstring for __init__"""
# initialize variables
self._document = document
print("the doc", self._document)
self._document.setController(self)
self._active_part = None
self._filename = None
self._file_open_path = None # will be set in _readSettings
self._has_no_associated_file = True
self._path_view_instance = None
self._slice_view_instance = None
self._undo_stack = None
self.win = None
self.fileopendialog = None
self.filesavedialog = None
self.settings = QSettings()
self._readSettings()
# call other init methods
self._initWindow()
app().document_controllers.add(self)
def _initWindow(self):
"""docstring for initWindow"""
self.win = DocumentWindow(doc_ctrlr=self)
# self.win.setWindowIcon(app().icon)
app().documentWindowWasCreatedSignal.emit(self._document, self.win)
self._connectWindowSignalsToSelf()
self.win.show()
app().active_document = self
def _initMaya(self):
"""
Initialize Maya-related state. Delete Maya nodes if there
is an old document left over from the same session. Set up
the Maya window.
"""
# There will only be one document
if (app().active_document and app().active_document.win and
not app().active_document.win.close()):
return
del app().active_document
app().active_document = self
import maya.OpenMayaUI as OpenMayaUI
import sip
ptr = OpenMayaUI.MQtUtil.mainWindow()
mayaWin = sip.wrapinstance(int(ptr), QMainWindow)
self.windock = QDockWidget("cadnano")
self.windock.setFeatures(QDockWidget.DockWidgetMovable
| QDockWidget.DockWidgetFloatable)
self.windock.setAllowedAreas(Qt.LeftDockWidgetArea
| Qt.RightDockWidgetArea)
self.windock.setWidget(self.win)
mayaWin.addDockWidget(Qt.DockWidgetArea(Qt.LeftDockWidgetArea),
self.windock)
self.windock.setVisible(True)
def _connectWindowSignalsToSelf(self):
"""This method serves to group all the signal & slot connections
made by DocumentController"""
self.win.action_new.triggered.connect(self.actionNewSlot)
self.win.action_open.triggered.connect(self.actionOpenSlot)
self.win.action_close.triggered.connect(self.actionCloseSlot)
self.win.action_save.triggered.connect(self.actionSaveSlot)
self.win.action_save_as.triggered.connect(self.actionSaveAsSlot)
self.win.action_SVG.triggered.connect(self.actionSVGSlot)
self.win.action_autostaple.triggered.connect(self.actionAutostapleSlot)
self.win.action_export_staples.triggered.connect(self.actionExportStaplesSlot)
self.win.action_preferences.triggered.connect(self.actionPrefsSlot)
self.win.action_modify.triggered.connect(self.actionModifySlot)
self.win.action_new_honeycomb_part.triggered.connect(\
self.actionAddHoneycombPartSlot)
self.win.action_new_square_part.triggered.connect(\
self.actionAddSquarePartSlot)
self.win.closeEvent = self.windowCloseEventHandler
self.win.action_about.triggered.connect(self.actionAboutSlot)
self.win.action_cadnano_website.triggered.connect(self.actionCadnanoWebsiteSlot)
self.win.action_feedback.triggered.connect(self.actionFeedbackSlot)
self.win.action_filter_handle.triggered.connect(self.actionFilterHandleSlot)
self.win.action_filter_endpoint.triggered.connect(self.actionFilterEndpointSlot)
self.win.action_filter_strand.triggered.connect(self.actionFilterStrandSlot)
self.win.action_filter_xover.triggered.connect(self.actionFilterXoverSlot)
self.win.action_filter_scaf.triggered.connect(self.actionFilterScafSlot)
self.win.action_filter_stap.triggered.connect(self.actionFilterStapSlot)
self.win.action_renumber.triggered.connect(self.actionRenumberSlot)
### SLOTS ###
def undoStackCleanChangedSlot(self):
"""The title changes to include [*] on modification."""
self.win.setWindowModified(not self.undoStack().isClean())
self.win.setWindowTitle(self.documentTitle())
def actionAboutSlot(self):
"""Displays the about cadnano dialog."""
from ui.dialogs.ui_about import Ui_About
dialog = QDialog()
dialog_about = Ui_About() # reusing this dialog, should rename
dialog.setStyleSheet("QDialog { background-image: url(ui/dialogs/images/cadnano2-about.png); background-repeat: none; }")
dialog_about.setupUi(dialog)
dialog.exec_()
filter_list = ["strand", "endpoint", "xover", "virtual_helix"]
def actionFilterHandleSlot(self):
"""Disables all other selection filters when active."""
fH = self.win.action_filter_handle
fE = self.win.action_filter_endpoint
fS = self.win.action_filter_strand
fX = self.win.action_filter_xover
fH.setChecked(True)
if fE.isChecked():
fE.setChecked(False)
if fS.isChecked():
fS.setChecked(False)
if fX.isChecked():
fX.setChecked(False)
self._document.documentSelectionFilterChangedSignal.emit(["virtual_helix"])
def actionFilterEndpointSlot(self):
"""
Disables handle filters when activated.
Remains checked if no other item-type filter is active.
"""
fH = self.win.action_filter_handle
fE = self.win.action_filter_endpoint
fS = self.win.action_filter_strand
fX = self.win.action_filter_xover
if fH.isChecked():
fH.setChecked(False)
if not fS.isChecked() and not fX.isChecked():
fE.setChecked(True)
self._strandFilterUpdate()
# end def
def actionFilterStrandSlot(self):
"""
Disables handle filters when activated.
Remains checked if no other item-type filter is active.
"""
fH = self.win.action_filter_handle
fE = self.win.action_filter_endpoint
fS = self.win.action_filter_strand
fX = self.win.action_filter_xover
if fH.isChecked():
fH.setChecked(False)
if not fE.isChecked() and not fX.isChecked():
fS.setChecked(True)
self._strandFilterUpdate()
# end def
def actionFilterXoverSlot(self):
"""
Disables handle filters when activated.
Remains checked if no other item-type filter is active.
"""
fH = self.win.action_filter_handle
fE = self.win.action_filter_endpoint
fS = self.win.action_filter_strand
fX = self.win.action_filter_xover
if fH.isChecked():
fH.setChecked(False)
if not fE.isChecked() and not fS.isChecked():
fX.setChecked(True)
self._strandFilterUpdate()
# end def
def actionFilterScafSlot(self):
"""Remains checked if no other strand-type filter is active."""
fSc = self.win.action_filter_scaf
fSt = self.win.action_filter_stap
if not fSc.isChecked() and not fSt.isChecked():
fSc.setChecked(True)
self._strandFilterUpdate()
def actionFilterStapSlot(self):
"""Remains checked if no other strand-type filter is active."""
fSc = self.win.action_filter_scaf
fSt = self.win.action_filter_stap
if not fSc.isChecked() and not fSt.isChecked():
fSt.setChecked(True)
self._strandFilterUpdate()
# end def
def _strandFilterUpdate(self):
win = self.win
filter_list = []
if win.action_filter_endpoint.isChecked():
filter_list.append("endpoint")
if win.action_filter_strand.isChecked():
filter_list.append("strand")
if win.action_filter_xover.isChecked():
filter_list.append("xover")
if win.action_filter_scaf.isChecked():
filter_list.append("scaffold")
if win.action_filter_stap.isChecked():
filter_list.append("staple")
self._document.documentSelectionFilterChangedSignal.emit(filter_list)
# end def
def actionNewSlot(self):
"""
1. If document is has no parts, do nothing.
2. If document is dirty, call maybeSave and continue if it succeeds.
3. Create a new document and swap it into the existing ctrlr/window.
"""
# clear/reset the view!
if len(self._document.parts()) == 0:
return # no parts
if self.maybeSave() == False:
return # user canceled in maybe save
else: # user did not cancel
if self.filesavedialog != None:
self.filesavedialog.finished.connect(self.newClickedCallback)
else: # user did not save
self.newClickedCallback() # finalize new
def actionOpenSlot(self):
"""
1. If document is untouched, proceed to open dialog.
2. If document is dirty, call maybesave and continue if it succeeds.
Downstream, the file is selected in openAfterMaybeSave,
and the selected file is actually opened in openAfterMaybeSaveCallback.
"""
if self.maybeSave() == False:
return # user canceled in maybe save
else: # user did not cancel
if hasattr(self, "filesavedialog"): # user did save
if self.filesavedialog != None:
self.filesavedialog.finished.connect(self.openAfterMaybeSave)
else:
self.openAfterMaybeSave() # windows
else: # user did not save
self.openAfterMaybeSave() # finalize new
def actionCloseSlot(self):
"""This will trigger a Window closeEvent."""
# if util.isWindows():
self.win.close()
app().qApp.exit(0)
def actionSaveSlot(self):
"""SaveAs if necessary, otherwise overwrite existing file."""
if self._has_no_associated_file:
self.saveFileDialog()
return
self.writeDocumentToFile()
def actionSaveAsSlot(self):
"""Open a save file dialog so user can choose a name."""
self.saveFileDialog()
def actionSVGSlot(self):
"""docstring for actionSVGSlot"""
fname = os.path.basename(str(self.filename()))
if fname == None:
directory = "."
else:
directory = QFileInfo(fname).path()
fdialog = QFileDialog(
self.win,
"%s - Save As" % QApplication.applicationName(),
directory,
"%s (*.svg)" % QApplication.applicationName())
fdialog.setAcceptMode(QFileDialog.AcceptSave)
fdialog.setWindowFlags(Qt.Sheet)
fdialog.setWindowModality(Qt.WindowModal)
self.svgsavedialog = fdialog
self.svgsavedialog.filesSelected.connect(self.saveSVGDialogCallback)
fdialog.open()
class DummyChild(QGraphicsItem):
def boundingRect(self):
return QRect(200, 200) # self.parentObject().boundingRect()
def paint(self, painter, option, widget=None):
pass
def saveSVGDialogCallback(self, selected):
if isinstance(selected, (list, tuple)):
fname = selected[0]
else:
fname = selected
print("da fname", fname)
if fname is None or os.path.isdir(fname):
return False
if not fname.lower().endswith(".svg"):
fname += ".svg"
if self.svgsavedialog != None:
self.svgsavedialog.filesSelected.disconnect(self.saveSVGDialogCallback)
del self.svgsavedialog # prevents hang
self.svgsavedialog = None
generator = QSvgGenerator()
generator.setFileName(fname)
generator.setSize(QSize(200, 200))
generator.setViewBox(QRect(0, 0, 2000, 2000))
painter = QPainter()
# Render through scene
# painter.begin(generator)
# self.win.pathscene.render(painter)
# painter.end()
# Render item-by-item
painter = QPainter()
style_option = QStyleOptionGraphicsItem()
q = [self.win.pathroot]
painter.begin(generator)
while q:
graphics_item = q.pop()
transform = graphics_item.itemTransform(self.win.sliceroot)[0]
painter.setTransform(transform)
if graphics_item.isVisible():
graphics_item.paint(painter, style_option, None)
q.extend(graphics_item.childItems())
painter.end()
def actionExportStaplesSlot(self):
"""
Triggered by clicking Export Staples button. Opens a file dialog to
determine where the staples should be saved. The callback is
exportStaplesCallback which collects the staple sequences and exports
the file.
"""
# Validate that no staple oligos are loops.
part = self.activePart()
if part is None:
return
stap_loop_olgs = part.getStapleLoopOligos()
if stap_loop_olgs:
from ui.dialogs.ui_warning import Ui_Warning
dialog = QDialog()
dialogWarning = Ui_Warning() # reusing this dialog, should rename
dialog.setStyleSheet("QDialog { background-image: url(ui/dialogs/images/cadnano2-about.png); background-repeat: none; }")
dialogWarning.setupUi(dialog)
locs = ", ".join([o.locString() for o in stap_loop_olgs])
msg = "Part contains staple loop(s) at %s.\n\nUse the break tool to introduce 5' & 3' ends before exporting. Loops have been colored red; use undo to revert." % locs
dialogWarning.title.setText("Staple validation failed")
dialogWarning.message.setText(msg)
for o in stap_loop_olgs:
o.applyColor(styles.stapColors[0].name())
dialog.exec_()
return
# Proceed with staple export.
fname = self.filename()
if fname == None:
directory = "."
else:
directory = QFileInfo(fname).path()
if util.isWindows(): # required for native looking file window
fname = QFileDialog.getSaveFileName(
self.win,
"%s - Export As" % QApplication.applicationName(),
directory,
"(*.csv)")
self.saveStaplesDialog = None
self.exportStaplesCallback(fname)
else: # access through non-blocking callback
fdialog = QFileDialog(
self.win,
"%s - Export As" % QApplication.applicationName(),
directory,
"(*.csv)")
fdialog.setAcceptMode(QFileDialog.AcceptSave)
fdialog.setWindowFlags(Qt.Sheet)
fdialog.setWindowModality(Qt.WindowModal)
self.saveStaplesDialog = fdialog
self.saveStaplesDialog.filesSelected.connect(self.exportStaplesCallback)
fdialog.open()
# end def
def actionPrefsSlot(self):
app().prefsClicked()
def actionAutostapleSlot(self):
part = self.activePart()
if part:
self.win.path_graphics_view.setViewportUpdateOn(False)
part.autoStaple()
self.win.path_graphics_view.setViewportUpdateOn(True)
def actionModifySlot(self):
"""
Notifies that part root items that parts should respond to modifier
selection signals.
"""
pass
# uncomment for debugging
# isChecked = self.win.actionModify.isChecked()
# self.win.pathroot.setModifyState(isChecked)
# self.win.sliceroot.setModifyState(isChecked)
# if app().isInMaya():
# isChecked = self.win.actionModify.isChecked()
# self.win.pathroot.setModifyState(isChecked)
# self.win.sliceroot.setModifyState(isChecked)
# self.win.solidroot.setModifyState(isChecked)
def actionAddHoneycombPartSlot(self):
"""docstring for actionAddHoneycombPartSlot"""
part = self._document.addHoneycombPart()
self.setActivePart(part)
def actionAddSquarePartSlot(self):
"""docstring for actionAddSquarePartSlot"""
part = self._document.addSquarePart()
self.setActivePart(part)
def actionRenumberSlot(self):
coordList = self.win.pathroot.getSelectedPartOrderedVHList()
part = self.activePart()
part.renumber(coordList)
# end def
### ACCESSORS ###
def document(self):
return self._document
def window(self):
return self.win
def setDocument(self, doc):
"""
Sets the controller's document, and informs the document that
this is its controller.
"""
self._document = doc
doc.setController(self)
def activePart(self):
if self._active_part == None:
self._active_part = self._document.selectedPart()
return self._active_part
def setActivePart(self, part):
self._active_part = part
def undoStack(self):
return self._document.undoStack()
### PRIVATE SUPPORT METHODS ###
def newDocument(self, doc=None, fname=None):
"""Creates a new Document, reusing the DocumentController."""
if fname is not None and self._filename == fname:
setReopen(True)
self._document.resetViews()
setBatch(True)
self._document.removeAllParts() # clear out old parts
setBatch(False)
self._document.undoStack().clear() # reset undostack
self._filename = fname if fname else "untitled.json"
self._has_no_associated_file = fname == None
self._active_part = None
self.win.setWindowTitle(self.documentTitle() + '[*]')
def saveFileDialog(self):
fname = self.filename()
if fname == None:
directory = "."
else:
directory = QFileInfo(fname).path()
if util.isWindows(): # required for native looking file window
fname = QFileDialog.getSaveFileName(
self.win,
"%s - Save As" % QApplication.applicationName(),
directory,
"%s (*.json)" % QApplication.applicationName())
self.writeDocumentToFile(fname)
else: # access through non-blocking callback
fdialog = QFileDialog(
self.win,
"%s - Save As" % QApplication.applicationName(),
directory,
"%s (*.json)" % QApplication.applicationName())
fdialog.setAcceptMode(QFileDialog.AcceptSave)
fdialog.setWindowFlags(Qt.Sheet)
fdialog.setWindowModality(Qt.WindowModal)
self.filesavedialog = fdialog
self.filesavedialog.filesSelected.connect(
self.saveFileDialogCallback)
fdialog.open()
# end def
def _readSettings(self):
self.settings.beginGroup("FileSystem")
self._file_open_path = self.settings.value("openpath", QDir().homePath())
self.settings.endGroup()
def _writeFileOpenPath(self, path):
"""docstring for _writePath"""
self._file_open_path = path
self.settings.beginGroup("FileSystem")
self.settings.setValue("openpath", path)
self.settings.endGroup()
### SLOT CALLBACKS ###
def actionNewSlotCallback(self):
"""
Gets called on completion of filesavedialog after newClicked's
maybeSave. Removes the dialog if necessary, but it was probably
already removed by saveFileDialogCallback.
"""
if self.filesavedialog != None:
self.filesavedialog.finished.disconnect(self.actionNewSlotCallback)
del self.filesavedialog # prevents hang (?)
self.filesavedialog = None
self.newDocument()
def exportStaplesCallback(self, selected):
"""Export all staple sequences to selected CSV file."""
if isinstance(selected, (list, tuple)):
fname = selected[0]
else:
fname = selected
if fname is None or os.path.isdir(fname):
return False
if not fname.lower().endswith(".csv"):
fname += ".csv"
if self.saveStaplesDialog != None:
self.saveStaplesDialog.filesSelected.disconnect(self.exportStaplesCallback)
# manual garbage collection to prevent hang (in osx)
del self.saveStaplesDialog
self.saveStaplesDialog = None
# write the file
output = self.activePart().getStapleSequences()
with open(fname, 'w') as f:
f.write(output)
# end def
def newClickedCallback(self):
"""
Gets called on completion of filesavedialog after newClicked's
maybeSave. Removes the dialog if necessary, but it was probably
already removed by saveFileDialogCallback.
"""
if self.filesavedialog != None:
self.filesavedialog.finished.disconnect(self.newClickedCallback)
del self.filesavedialog # prevents hang (?)
self.filesavedialog = None
self.newDocument()
def openAfterMaybeSaveCallback(self, selected):
"""
Receives file selection info from the dialog created by
openAfterMaybeSave, following user input.
Extracts the file name and passes it to the decode method, which
returns a new document doc, which is then set as the open document
by newDocument. Calls finalizeImport and disconnects dialog signaling.
"""
if isinstance(selected, (list, tuple)):
fname = selected[0]
else:
fname = selected
if fname is None or os.path.isdir(fname):
return False
self._writeFileOpenPath(os.path.dirname(fname))
self.win.path_graphics_view.setViewportUpdateOn(False)
self.win.slice_graphics_view.setViewportUpdateOn(False)
self.newDocument(fname=fname)
decodeFile(fname, document=self._document)
self.win.path_graphics_view.setViewportUpdateOn(True)
self.win.slice_graphics_view.setViewportUpdateOn(True)
self.win.path_graphics_view.update()
self.win.slice_graphics_view.update()
if hasattr(self, "filesavedialog"): # user did save
if self.fileopendialog != None:
self.fileopendialog.filesSelected.disconnect(\
self.openAfterMaybeSaveCallback)
# manual garbage collection to prevent hang (in osx)
del self.fileopendialog
self.fileopendialog = None
def saveFileDialogCallback(self, selected):
"""If the user chose to save, write to that file."""
if isinstance(selected, (list, tuple)):
fname = selected[0]
else:
fname = selected
if fname is None or os.path.isdir(fname):
return False
if not fname.lower().endswith(".json"):
fname += ".json"
if self.filesavedialog != None:
self.filesavedialog.filesSelected.disconnect(
self.saveFileDialogCallback)
del self.filesavedialog # prevents hang
self.filesavedialog = None
self.writeDocumentToFile(fname)
self._writeFileOpenPath(os.path.dirname(fname))
### EVENT HANDLERS ###
def windowCloseEventHandler(self, event):
"""Intercept close events when user attempts to close the window."""
if self.maybeSave():
event.accept()
# if app().isInMaya():
# self.windock.setVisible(False)
# del self.windock
# self.windock = None
app().document_controllers.remove(self)
else:
event.ignore()
self.actionCloseSlot()
### FILE INPUT ##
def documentTitle(self):
fname = os.path.basename(str(self.filename()))
if not self.undoStack().isClean():
fname += '[*]'
return fname
def filename(self):
return self._filename
def setFilename(self, proposed_fname):
if self._filename == proposed_fname:
return True
self._filename = proposed_fname
self._has_no_associated_file = False
self.win.setWindowTitle(self.documentTitle())
return True
def openAfterMaybeSave(self):
"""
This is the method that initiates file opening. It is called by
actionOpenSlot to spawn a QFileDialog and connect it to a callback
method.
"""
path = self._file_open_path
if util.isWindows(): # required for native looking file window#"/",
fname = QFileDialog.getOpenFileName(
None,
"Open Document", path,
"cadnano1 / cadnano2 Files (*.nno *.json *.cadnano)")
self.filesavedialog = None
self.openAfterMaybeSaveCallback(fname)
else: # access through non-blocking callback
fdialog = QFileDialog(
self.win,
"Open Document",
path,
"cadnano1 / cadnano2 Files (*.nno *.json *.cadnano)")
fdialog.setAcceptMode(QFileDialog.AcceptOpen)
fdialog.setWindowFlags(Qt.Sheet)
fdialog.setWindowModality(Qt.WindowModal)
self.fileopendialog = fdialog
self.fileopendialog.filesSelected.connect(self.openAfterMaybeSaveCallback)
fdialog.open()
# end def
### FILE OUTPUT ###
def maybeSave(self):
"""Save on quit, check if document changes have occured."""
if app().dontAskAndJustDiscardUnsavedChanges:
return True
if not self.undoStack().isClean(): # document dirty?
savebox = QMessageBox(QMessageBox.Warning, "Application",
"The document has been modified.\nDo you want to save your changes?",
QMessageBox.Save | QMessageBox.Discard | QMessageBox.Cancel,
self.win,
Qt.Dialog | Qt.MSWindowsFixedSizeDialogHint | Qt.Sheet)
savebox.setWindowModality(Qt.WindowModal)
save = savebox.button(QMessageBox.Save)
discard = savebox.button(QMessageBox.Discard)
cancel = savebox.button(QMessageBox.Cancel)
save.setShortcut("Ctrl+S")
discard.setShortcut(QKeySequence("D,Ctrl+D"))
cancel.setShortcut(QKeySequence("C,Ctrl+C,.,Ctrl+."))
ret = savebox.exec_()
del savebox # manual garbage collection to prevent hang (in osx)
if ret == QMessageBox.Save:
return self.actionSaveAsSlot()
elif ret == QMessageBox.Cancel:
return False
return True
def writeDocumentToFile(self, filename=None):
if filename == None:
assert(not self._has_no_associated_file)
filename = self.filename()
try:
with open(filename, 'w') as f:
helix_order_list = self.win.pathroot.getSelectedPartOrderedVHList()
encode(self._document, helix_order_list, f)
except IOError:
flags = Qt.Dialog | Qt.MSWindowsFixedSizeDialogHint | Qt.Sheet
errorbox = QMessageBox(QMessageBox.Critical,
"cadnano",
"Could not write to '%s'." % filename,
QMessageBox.Ok,
self.win,
flags)
errorbox.setWindowModality(Qt.WindowModal)
errorbox.open()
return False
self.undoStack().setClean()
self.setFilename(filename)
return True
def actionCadnanoWebsiteSlot(self):
import webbrowser
webbrowser.open("http://cadnano.org/")
def actionFeedbackSlot(self):
import webbrowser
webbrowser.open("http://cadnano.org/feedback")
