def __init__(self, parent=None, filter_column_index=None):
""" """
QtWidgets.QTableView.__init__(self, parent)
self._tablemodel = ToolboxTableModel(modeldata=DatasetTable())
self._selectionmodel = None # Created below.
# Connect models.
if filter_column_index is None:
self.setModel(self._tablemodel)
#
self._selectionmodel = QtCore.QItemSelectionModel(self._tablemodel)
self.setSelectionModel(self._selectionmodel)
self.resizeColumnsToContents()
else:
""" Use this method if the default model should be replaced by a filtered model. """
# Filter proxy model.
self.filterproxymodel = QtCore.QSortFilterProxyModel(self)
self.filterproxymodel.setSourceModel(self._tablemodel)
self.filterproxymodel.setFilterKeyColumn(filter_column_index)
self.setModel(self.filterproxymodel)
#
self._selectionmodel = QtCore.QItemSelectionModel(
self.filterproxymodel)
self.setSelectionModel(self._selectionmodel)
self.resizeColumnsToContents()
# Default setup for tables.
self.setAlternatingRowColors(True)
self.setHorizontalScrollMode(
QtWidgets.QAbstractItemView.ScrollPerPixel)
def delete_row(self):
reply = QtWidgets.QMessageBox.question(
self, "Demande de suppression",
"Êtes-vous sûr de vouloir supprimer l'opération ?",
QtWidgets.QMessageBox.Yes, QtWidgets.QMessageBox.No)
if reply == QtWidgets.QMessageBox.Yes:
l = self.tableView.currentIndex().row()
print("ligne")
print(l)
selection = QtCore.QItemSelectionModel(self.model)
index = selection.currentIndex()
if self.model.removeRows(l, 1, index):
self.model.submitAll()
print("ok suppression")
QMessageBox.information(self, "Succès",
"Suppression avec succès")
self.initialise()
else:
QMessageBox.information(self, "Erreur",
"Erreur suppression attribut")
else:
reply.close(self)
def __init__(self, window):
Ui_MainWindow.__init__(self)
self.setupUi(window)
self.pushButton_connect.clicked.connect(self.ConnectServer)
# self.ui.closeEvent = self.closeEvent
window.closeEvent = self.closeEvent
self.model = QtGui.QStandardItemModel(self.listView_clients)
self.listView_clients.setModel(self.model)
self.selectmodel = QtCore.QItemSelectionModel()
self.selectmodel.flags = QtCore.QItemSelectionModel.ClearAndSelect
self.listView_clients.setSelectionModel(self.selectmodel)
self.listView_clients.selectionModel().selectionChanged.connect(self.selectClientChanges)
# adjust sizes
'''
self.pushButton_30.adjustSize()
self.pushButton_60.adjustSize()
self.pushButton_connect.adjustSize()
self.pushButton_minShutdown.adjustSize()
self.pushButton_refresh_clients.adjustSize()
self.pushButton_stop.adjustSize()
self.pushButton_remote_sd_custom.adjustSize()
self.pushButton_remote_sd_now.adjustSize()
self.pushButton_remote_sd_stop.adjustSize()
'''
sett=self.tryLoadSettings()
self.lineEdit_clientName.setText(str(sett).strip())
self.lineEdit_clientName.returnPressed.connect(self.writeSettings)
print(sett)
# handle close application
self.pushButton_exit.clicked.connect(self.SafeCleanUp)
self.label_status.setText("Disconnected")
self.label_status.setStyleSheet(("QLabel { color : red; }"))
# local buttons
self.pushButton_30.clicked.connect(lambda: self.setLocalShutDown(30 * 60))
self.pushButton_60.clicked.connect(lambda: self.setLocalShutDown(60 * 60))
self.pushButton_minShutdown.clicked.connect(lambda: self.setLocalShutDown(-1))
self.pushButton_stop.clicked.connect(self.stopPendingShutdown)
# remote buttons
self.pushButton_remote_sd_now.clicked.connect(lambda: self.sendRemoteShutdown(0))
self.pushButton_remote_sd_custom.clicked.connect(lambda: self.sendRemoteShutdown(-1))
self.pushButton_remote_sd_stop.clicked.connect(self.sendRemotestopPending)
# Loop thread
self.loopthread = LoopThread(self)
self.loopthread.start()
# just to be safe
r = os.system("shutdown -a")
if r == 0:
self.displayInfoBox("Im sorry. I had to stop scheduled operation.")
# remote clients buttons
self.enableRemoteClientCommands(False)
def __init__(self):
QtWidgets.QWidget.__init__(self)
self.stringListModel = QtCore.QStringListModel()
self.doneSelectionModel = QtCore.QItemSelectionModel()
self.doneSelectionModel.setModel(self.stringListModel)
self.checkableProxy = KItemModels.KCheckableProxyModel()
self.checkableProxy.setSourceModel(self.stringListModel)
self.checkableProxy.setSelectionModel(self.doneSelectionModel)
mainlayout = QtWidgets.QHBoxLayout(self)
todoLayout = QtWidgets.QVBoxLayout(self)
mainlayout.addLayout(todoLayout)
todoLayout.addWidget(QtWidgets.QLabel("TODO list"))
addLayout = QtWidgets.QHBoxLayout(self)
todoLayout.addLayout(addLayout)
self.addLineEdit = QtWidgets.QLineEdit()
addLayout.addWidget(self.addLineEdit)
self.addButton = QtWidgets.QPushButton("Add")
addLayout.addWidget(self.addButton)
self.addButton.clicked.connect(self.add_todo)
self.addLineEdit.returnPressed.connect(self.add_todo)
self.stringsView = QtWidgets.QTreeView()
self.stringsView.header().hide()
self.stringsView.setModel(self.checkableProxy)
self.stringsView.setSelectionMode(
QtWidgets.QTreeView.ExtendedSelection)
todoLayout.addWidget(self.stringsView)
self.selectionProxy = KItemModels.KSelectionProxyModel()
self.selectionProxy.setSourceModel(self.stringListModel)
self.selectionProxy.setSelectionModel(self.doneSelectionModel)
l = QtWidgets.QVBoxLayout(self)
mainlayout.addLayout(l)
l.addWidget(QtWidgets.QLabel("DONE list"))
self.selectionView = QtWidgets.QTreeView()
self.selectionView.header().hide()
self.selectionView.setModel(self.selectionProxy)
l.addWidget(self.selectionView)
statusLayout = QtWidgets.QHBoxLayout(self)
l.addLayout(statusLayout)
self.ratingWidget = KWidgetsAddons.KLed()
statusLayout.addWidget(self.ratingWidget)
self.statusText = QtWidgets.QLabel("Status: Ok")
statusLayout.addWidget(self.statusText)
def setTableModel(self, tablemodeldata):
""" """
if self._tablemodel:
self._tablemodel.beginResetModel()
self._tablemodel.setModeldata(tablemodeldata)
self._tablemodel.endResetModel()
self._selectionmodel = QtCore.QItemSelectionModel(self._tablemodel)
self.setSelectionModel(self._selectionmodel)
self.resizeColumnsToContents()
def Window(self):
#make data into some qobject referring to pandas?
#self.picpage=stack.widget(picin) #gets the page if data transmission needed between, like selected indices
#print(self.picpage)
self.view = QTableView()
self.view.setSelectionBehavior(
QAbstractItemView.SelectRows) #selects rows
self.view.setSelectionMode(
QAbstractItemView.MultiSelection
) #each selection is toggles whether item is in selection - don't need to hold down shift
#self.view.setSortingEnabled(True)
self.view.setMinimumWidth(400)
self.view.setMaximumWidth(700)
self.sel = QtCore.QItemSelectionModel()
self.layout.addWidget(self.view, 1, 0)
self.catbx = CategoryBox()
self.catbx.setToolTip("Choose which categories of tags to print")
self.catbx.selectedChanged.connect(self.catfn)
self.layout.addWidget(self.catbx, 0, 1)
self.des = QPushButton(text='Deselect All')
self.des.clicked.connect(lambda: self.view.selectionModel().reset(
)) #make it so this appears and disappears based on selection
self.des.clicked.connect(self.selectfn)
self.des.setHidden(True)
self.layout.addWidget(self.des, 2, 1)
self.csv = QPushButton(text="Locate CSV")
self.layout.addWidget(self.csv, 3, 0)
self.csv.clicked.connect(lambda: locatefn(typ='csv', parent=self)
) #connect to openfilewindow -> parse somehow
self.db = QPushButton(text="Locate DB")
self.layout.addWidget(self.db, 2, 0)
self.db.clicked.connect(lambda: locatefn(typ='db', parent=self)
) #connect to openfilewindow -> parse somehow
self.sw = QPushButton(
"Print Tags") #make only appear if tags are selected,
self.sw.setHidden(True)
self.sw.clicked.connect(self.switchfn)
self.sw.setFixedHeight(80)
self.layout.addWidget(self.sw, 1, 1)
self.sw.sizePolicy().setRetainSizeWhenHidden(True)
def initModel(self, host):
nodes = self.model.initModel(host)
for node in nodes:
data = ""
if (node.value[0] != None):
data = node.value[0].decode('UTF-8')
self.appendChildRow(self.rootitem, node.name, data)
self.sti.removeRows(1, self.rootitem.rowCount())
self.sti.appendRow([self.rootitem])
self.sti.setHorizontalHeaderLabels([host, 'data'])
self.setModel(self.sti)
self.setSelectionModel(QtCore.QItemSelectionModel())
self.selectionModel().selectionChanged.connect(self.selectPath)
self.expanded.connect(self.itemExpand)
self.sti.itemChanged.connect(self.itemChanged)
self.setColumnWidth(0, 500)
def __init__(self, api: Api, main_window: QtWidgets.QMainWindow) -> None:
super().__init__(main_window)
model = AssStylesModel(self, api.subs.styles)
selection_model = QtCore.QItemSelectionModel(model)
self._style_list = _StyleList(api, model, selection_model, self)
self._style_editor = _StyleEditor(api, model, selection_model, self)
self._style_editor.setEnabled(False)
self._preview_box = _StylePreview(api, model, selection_model, self)
self._preview_box.preview_text_changed.connect(self._sync_preview_text)
layout = QtWidgets.QHBoxLayout(self)
layout.addWidget(self._style_list)
layout.addWidget(self._style_editor)
layout.addWidget(self._preview_box)
self.setWindowTitle("Styles manager")
self._sync_preview_text()
def edit(self):
reply = QtWidgets.QMessageBox.question(self, "Demande de modification","Êtes-vous sûr de vouloir modifier l'employé ?",
QtWidgets.QMessageBox.Yes,
QtWidgets.QMessageBox.No)
if reply == QtWidgets.QMessageBox.Yes:
row = self.model.rowCount()
selection = QtCore.QItemSelectionModel(self.model)
index = selection.currentIndex()
if self.model.insertRow(row,index):
self.model.submitAll()
print("ok edit")
QMessageBox.information(self, "Succès","Modification avec succès")
self.initialise()
else:
QMessageBox.information(self, "Erreur","Erreur modification attribut")
else:
reply.close(self)
def main():
app = QtWidgets.QApplication(sys.argv)
stringListModel = QtCore.QStringListModel([
"Monday", "Tuesday", "Wednesday", "Thursday", "Friday", "Saturday",
"Sunday"
])
selectionModel = QtCore.QItemSelectionModel()
selectionModel.setModel(stringListModel)
selectionProxy = KItemModels.KSelectionProxyModel()
selectionProxy.setSelectionModel(selectionModel)
selectionProxy.setSourceModel(stringListModel)
assert (selectionProxy.rowCount() == 0)
selectionModel.select(stringListModel.index(0, 0),
QtCore.QItemSelectionModel.Select)
assert (selectionProxy.rowCount() == 1)
def changePathFindFolder(self, thePath):
# self.textboxValue = self.windowNew.inputText.text()
# QtWidgets.QMessageBox.question(self, 'Message - pythonspot.com', "You typed: " + textboxValue, QMessageBox.Ok, QMessageBox.Ok)
# self.windowNew.inputText.setText("")
path = str(thePath)
self.model = QtWidgets.QFileSystemModel()
self.model.setRootPath((QtCore.QDir.rootPath()))
filters = ["*.jpg", "*.JPG", "*.jpeg", "*.JPEG", "*.png", "*.PNG"]
self.model.setNameFilters(filters)
self.model.setNameFilterDisables(False)
self.model.setReadOnly(True)
self.indexRoot = self.model.index(path)
self.windowNew.filemanager.setModel(self.model)
self.windowNew.filemanager.setRootIndex(self.indexRoot)
self.windowNew.filemanager.clicked.connect(self.on_treeView_clicked)
self.windowNew.filemanager.doubleClicked.connect(
self.on_treeView_doubleClicked)
self.windowNew.filemanager.hideColumn(1)
self.windowNew.filemanager.hideColumn(2)
self.windowNew.filemanager.hideColumn(3)
self._file_selection_model = QtCore.QItemSelectionModel(self.model)
self._file_selection_model.selectionChanged.connect(self.newFun)
self.windowNew.filemanager.setAnimated(True)
self.windowNew.filemanager.setIndentation(20)
self.windowNew.filemanager.setHeaderHidden(True)
self.windowNew.filemanager.setSortingEnabled(False)
self.windowNew.filemanager.setDropIndicatorShown(True)
self.windowNew.filemanager.setRootIsDecorated(True)
self.windowNew.filemanager.setUniformRowHeights(True)
self.windowNew.filemanager.setContextMenuPolicy(
QtCore.Qt.CustomContextMenu)
self.windowNew.filemanager.customContextMenuRequested.connect(
self.showCMFileM)
self.theFolderPath = path
def __init__(self, parent=None):
""" """
try:
QtWidgets.QTableView.__init__(self, parent)
self._selectionmodel = None
# Default setup for tables.
self.setAlternatingRowColors(True)
self.setHorizontalScrollMode(
QtWidgets.QAbstractItemView.ScrollPerPixel)
#self.setSelectionBehavior(QtWidgets.QAbstractItemView.SelectRows)
self.setSelectionMode(
QtWidgets.QAbstractItemView.ContiguousSelection)
# Default model, data and selection
self._tablemodel = ToolboxEditableTableModel()
self.setModel(self._tablemodel)
self._selectionmodel = QtCore.QItemSelectionModel(self._tablemodel)
self.setSelectionModel(self._selectionmodel)
self.resizeColumnsToContents()
except Exception as e:
print('DEBUG, Exception: ', str(e))
raise
def __init__(self):
self.filepath = ""
QtWidgets.QMainWindow.__init__(self)
Ui_MainWindow.__init__(self)
self.setupUi(self)
self.model = Model()
self.listview.setModel(self.model)
self.selection = QtCore.QItemSelectionModel(self.model)
self.listview.setSelectionModel(self.selection)
self.delegate = Delegate()
self.listview.setItemDelegate(self.delegate)
self.listview.setEditTriggers(
QtWidgets.QAbstractItemView.NoEditTriggers)
self.open_action.triggered.connect(self.readFromFile)
self.save_action.triggered.connect(self.writeToFile)
self.saveAs_action.triggered.connect(self.writeToFile)
self.add_button.pressed.connect(self.addElement)
self.de_button.pressed.connect(self.deleteElement)
self.change_button.pressed.connect(self.changeElement)
self.model.dataChanged.connect(self.modelModified)
def __init__(self,app):
QMainWindow.__init__(self)
Ui_MainWindow.__init__(self)
PLSDR.VERSION = "2.0"
# device names and invocation strings --
# some are tested, some are search results
# of doubtful accuracy.
# feel free to add new entries.
# please tell the author of any new, successful
# devices and invocation strings
# or problems with (or changes to) these
# also enter local IP:port values where required
self.device_dict = {
'AirSpy':'airspy',
'BladeRF':'bladerf',
'FCD':'fcd',
'HackRF':'hackrf',
'LimeSDR':'soapy=0,driver=lime',
'Miri':'miri',
'OsmoSDR':'osmosdr',
'PlutoSDR':'ip:pluto.local',
'RedPitaya':'redpitaya=127.0.0.1:1234', # change this IP:port value
'RFSPACE':'sdr-iq',
'RTL-SDR':'rtl',
'RTL-SDR TCP':'rtl_tcp=127.0.0.1:1234', # change this IP:port value
'SDRplay':'soapy=0,driver=sdrplay',
'USRP':'uhd',
}
self.app = app
self.setupUi(self)
self.setWindowTitle("PLSDR Version %s" % PLSDR.VERSION)
self.app_icon = QtGui.QIcon()
self.app_icon.addFile('icon/app_icon_16x16.png', QtCore.QSize(16,16))
self.app_icon.addFile('icon/app_icon_24x24.png', QtCore.QSize(24,24))
self.app_icon.addFile('icon/app_icon_32x32.png', QtCore.QSize(32,32))
self.app_icon.addFile('icon/app_icon_48x48.png', QtCore.QSize(48,48))
self.app_icon.addFile('icon/app_icon_128x128.png', QtCore.QSize(128,128))
self.app_icon.addFile('icon/app_icon_256x256.png', QtCore.QSize(256,256))
app.setWindowIcon(self.app_icon)
app.aboutToQuit.connect(self.app_quit)
self.graphic_data = None
self.config = self.get_default_config()
self.full_rebuild_flag = True
self.running = False
self.enabled = False
self.upconvert_state_control = None
self.radio = Radio.Radio(self)
self.meta_style_sheet = """
QLabel[accessibleName=FreqDigit] {
color:#00c000;
font-size:24pt;
background:black;
padding:0;
}
QLabel[accessibleName=FreqDigitDark] {
color:#003000;
font-size:24pt;
background:black;
padding:0;
}
QLabel[accessibleName=FreqDigit]:hover {
color:#00ff00;
background:#404040;
}
QLabel[accessibleName=FreqDigitDark]:hover {
color:#00ff00;
background:#404040;
}
QWidget[objectName=digit_widget] {
background:black;
}
/* this solves the mouse tooltip color problem */
DisplayPlot {
qproperty-zoomer_color: #c0e0ff;
}
QTextEdit {
text-align:right;
}
"""
self.setStyleSheet(self.meta_style_sheet)
# maps keyboard keys to frequency changes in Hz
self.key_hash = {
QtCore.Qt.Key_Minus : -1e2,
QtCore.Qt.Key_Plus : 1e2,
QtCore.Qt.Key_Left : -1e3,
QtCore.Qt.Key_Right : 1e3,
QtCore.Qt.Key_Up : -1e4,
QtCore.Qt.Key_Down : 1e4,
QtCore.Qt.Key_PageUp : -1e5,
QtCore.Qt.Key_PageDown : 1e5,
QtCore.Qt.Key_Insert : -1e6,
QtCore.Qt.Key_Delete : 1e6,
}
# locate user's home directory, create configuration path
home_dir = os.path.expanduser('~')
classname = self.__class__.__name__
self.config_path = os.path.join(home_dir,".%s" % classname)
if not os.path.exists(self.config_path):
os.makedirs(self.config_path)
self.config_file = os.path.join(self.config_path,'config.ini')
os.chdir(os.path.dirname(os.path.realpath(__file__)))
self.run_stop_button.clicked.connect(self.run_stop_event)
self.quit_button.clicked.connect(self.app_quit)
self.offset_freq_control = None
self.signal_progress_bar.setMinimum(-120)
self.signal_progress_bar.setMaximum(10)
self.mode_list = ['AM','FM','WFM','USB','LSB','CW_USB','CW_LSB']
self.MODE_AM = 0
self.MODE_FM = 1
self.MODE_WFM = 2
self.MODE_USB = 3
self.MODE_LSB = 4
self.MODE_CW_USB = 5
self.MODE_CW_LSB = 6
self.mode_control = MyCombo.Combo(self,self.config,self.mode_combo,self.change_modes,'mode',self.mode_list)
self.agc_list = ['SW/F','SW/S','HW','OFF']
self.AGC_FAST = 0
self.AGC_SLOW = 1
self.AGC_HW = 2
self.AGC_OFF = 3
self.agc_control = MyCombo.Combo(self,self.config,self.agc_combo,self.set_agc_mode,'agc_mode',self.agc_list)
self.bw_buttonlist = [self.if_bw_wide_button,self.if_bw_medium_button,self.if_bw_narrow_button]
self.BW_WIDE = 0
self.BW_MEDIUM = 1
self.BW_NARROW = 2
self.if_bw_buttongroup_control = MyButtonGroup.ButtonGroup(self.config,self.if_bw_button_group,self.set_bw_mode,'bw_mode',self.bw_buttonlist)
self.gain_control_a = MySlider.Slider(self.config,self.gain_slider_a,self.set_named_gain,'gain_a',0,50)
self.gain_control_b = MySlider.Slider(self.config,self.gain_slider_b,self.set_named_gain,'gain_b',0,50)
self.gain_control_c = MySlider.Slider(self.config,self.gain_slider_c,self.set_named_gain,'gain_c',0,50)
self.gain_control_d = MySlider.Slider(self.config,self.gain_slider_d,self.set_named_gain,'gain_d',0,50)
self.af_gain_control = MySlider.Slider(self.config,self.af_gain_slider,self.set_af_gain,'af_gain',0,1,400)
self.average_control = MySlider.Slider(self.config,self.averaging_slider,self.set_average,'average',1,.01)
self.squelch_control = MySlider.Slider(self.config,self.squelch_slider,self.set_squelch,'squelch_level',-130,50,400)
self.populate_freq_list()
model = self.freq_table.model()
selectionModel = QtCore.QItemSelectionModel(model)
self.freq_table.setSelectionModel(selectionModel)
selectionModel.selectionChanged.connect(self.row_selected)
self.setup_freq_digits()
self.bandwidth_control = MyCombo.Combo(self,self.config,self.bandwidth_combo,self.set_bandwidth,'bandwidth')
self.fft_sizes = ["%d" % 2**n for n in range(6,20)]
self.fft_size_control = MyCombo.Combo(self,self.config,self.fft_size_combo,self.critical_change,'fft_size',self.fft_sizes)
self.framerates = ["%d" % n for n in (60,50,30,25,20,15,10,5,2,1)]
self.framerate_control = MyCombo.Combo(self,self.config,self.framerate_combo,self.critical_change,'framerate',self.framerates)
self.antenna_control = MyCombo.Combo(self,self.config,self.antenna_combo,self.change_antennas,'antenna')
self.sample_rate_control = MyCombo.Combo(self,self.config,self.sample_rate_combo,self.critical_change,'sample_rate')
self.audio_rate_control = MyTextEntry.TextEntry(self,self.audio_rate_text,self.critical_change,'audio_rate',1e3,60e3)
self.cw_base_control = MyTextEntry.TextEntry(self,self.cw_base_text,self.critical_change,'cw_base',1e2,3e3)
self.audio_device_control = MyTextEntry.TextEntry(self,self.audio_device_text,self.critical_change,'audio_device',0,0,True)
self.corr_ppm_control = MyTextEntry.TextEntry(self,self.corr_ppm_text,self.set_corr_ppm,'corr_ppm',-100,100)
self.corr_ppm_upc_control = MyTextEntry.TextEntry(self,self.corr_ppm_upc_text,self.set_corr_ppm_upc,'corr_ppm_upc',-100,100)
self.upconvert_state_control = MyCheckbox.Checkbox(self,self.upconversion_checkbox,self.use_upconversion,'upconvert_state')
self.upconvert_trans_control = MyTextEntry.TextEntry(self,self.upconvert_trans_text,self.update_freq_event,'upconvert_trans',0,50e6)
self.upconvert_freq_control = MyTextEntry.TextEntry(self,self.upconvert_freq_text,self.update_freq_event,'upconvert_freq',0,1000e6)
self.offset_state_control = MyCheckbox.Checkbox(self,self.offset_checkbox,self.use_offset,'offset_state')
self.offset_freq_control = MyTextEntry.TextEntry(self,self.offset_freq_text,self.update_offset_freq,'offset_freq',-10000,10000)
self.dc_offset_control = MyCheckbox.Checkbox(self,self.dc_offset_checkbox,self.set_dc_offset,'dc_offset')
self.iq_balance_control = MyCheckbox.Checkbox(self,self.iq_balance_checkbox,self.set_iq_balance,'iq_balance')
# pause number 1 waits for interface to be rendered
# before modifying it
QtCore.QTimer.singleShot(100, self.first_read_config)
def __init__(self, parent=None):
super(LogfileListWidget, self).__init__(parent)
# Standard item model
self.model = LogfileModel(0, 6, self)
self.selection_model = QtCore.QItemSelectionModel(self.model)
self.treeview = LogfileListView(self)
# set ItemModel to treeview widget
self.treeview.setModel(self.model)
self.treeview.setSelectionModel(self.selection_model)
# TreeView setting
self.treeview.setSelectionMode(
QtWidgets.QAbstractItemView.ContiguousSelection
)
self.selection_model.clear()
self.file_dialog = None
# set buttons
self.label1 = QtWidgets.QLabel(self)
self.label1.setText("Change all detector to:")
self.label2 = QtWidgets.QLabel(self)
self.label2.setText("Change all channel to:")
self.setall_detector_comboBox = QtWidgets.QComboBox(self)
self.setall_detector_comboBox.addItem("")
self.setall_detector_comboBox.setItemText(0, "A")
self.setall_detector_comboBox.addItem("")
self.setall_detector_comboBox.setItemText(1, "B")
self.setall_channel_comboBox = QtWidgets.QComboBox(self)
self.setall_channel_comboBox.addItem("")
self.setall_channel_comboBox.setItemText(0, "1")
self.setall_channel_comboBox.addItem("")
self.setall_channel_comboBox.setItemText(1, "2")
self.combobox_layout = QtWidgets.QHBoxLayout()
self.combobox_layout.addWidget(self.label1)
self.combobox_layout.addWidget(self.setall_detector_comboBox)
self.combobox_layout.addWidget(self.label2)
self.combobox_layout.addWidget(self.setall_channel_comboBox)
self.open_button = QtWidgets.QPushButton(self)
self.open_button.setObjectName("Open button")
self.open_button.setText("Open file")
self.delete_button = QtWidgets.QPushButton(self)
self.delete_button.setObjectName("Remove file button")
self.delete_button.setText("Remove file")
self.color_button = QtWidgets.QPushButton(self)
self.color_button.setObjectName("Change plot color")
self.color_button.setText("Change color")
self.reset_color_button = QtWidgets.QPushButton(self)
self.reset_color_button.setObjectName("Reset color to default")
self.reset_color_button.setText("Reset color")
self.check_all_button = QtWidgets.QPushButton(self)
self.check_all_button.setObjectName("Check all button")
self.check_all_button.setText("Check All")
self.uncheck_all_button = QtWidgets.QPushButton(self)
self.uncheck_all_button.setObjectName("Uncheck all button")
self.uncheck_all_button.setText("Uncheck All")
self.move_up_button = QtWidgets.QPushButton(self)
self.move_up_button.setObjectName("Move-up button")
self.move_up_button.setText("Move up")
self.move_down_button = QtWidgets.QPushButton(self)
self.move_down_button.setObjectName("Move-down button")
self.move_down_button.setText("Move down")
self.gridLay1 = QtWidgets.QGridLayout()
self.gridLay1.addWidget(self.open_button, 0, 0, 1, 1)
self.gridLay1.addWidget(self.delete_button, 0, 1, 1, 1)
self.gridLay1.addWidget(self.color_button, 0, 2, 1, 1)
self.gridLay1.addWidget(self.reset_color_button, 0, 3, 1, 1)
self.gridLay1.addWidget(self.check_all_button, 1, 0, 1, 1)
self.gridLay1.addWidget(self.uncheck_all_button, 1, 1, 1, 1)
self.gridLay1.addWidget(self.move_up_button, 1, 2, 1, 1)
self.gridLay1.addWidget(self.move_down_button, 1, 3, 1, 1)
self.verLay1 = QtWidgets.QVBoxLayout()
self.verLay1.addWidget(self.treeview)
self.verLay2 = QtWidgets.QVBoxLayout(self)
self.verLay2.addLayout(self.combobox_layout)
self.verLay2.addLayout(self.verLay1)
self.verLay2.addLayout(self.gridLay1)
# signal slot definition
self.setall_detector_comboBox.activated.connect(
self.change_all_detector)
self.setall_channel_comboBox.activated.connect(
self.change_all_channel)
# buttons
self.open_button.clicked.connect(self.open_file)
self.delete_button.clicked.connect(self.delete_file)
self.color_button.clicked.connect(self.change_plot_color)
self.reset_color_button.clicked.connect(self.reset_color)
self.check_all_button.clicked.connect(
lambda: self.model.change_all_check_state(2))
self.uncheck_all_button.clicked.connect(
lambda: self.model.change_all_check_state(0))
self.move_up_button.clicked.connect(lambda: self.move_selected(-1))
self.move_down_button.clicked.connect(lambda: self.move_selected(1))
def initSelectionModel(self):
o_selectionModel = QtCore.QItemSelectionModel(self.model(), self)
self.setSelectionModel(o_selectionModel)
o_selectionModel.selectionChanged.connect(self.handleSelectionChanged)
