def take_screenshot_pos(flags):
loop = QEventLoop()
screen_shot = Screenshot(flags)
screen_shot.show()
screen_shot.widget_closed.connect(loop.quit)
loop.exec_()
pos = screen_shot.target_img_pos
return pos
def data_request(self, request, bparams):
connection_loop = QEventLoop()
QObject.connect(self.managerAccess,
SIGNAL("finished( QNetworkReply* )"), connection_loop,
SLOT("quit()"))
reply = self.managerAccess.post(request, bparams)
connection_loop.exec_() #sleep
#reply->bytesAvailable();
#reply.deleteLater()
return reply
def run_leave_animation(self):
"""
Runs the animation that represents execution leaving this item.
Blocks until the animation is finished.
"""
loop = QEventLoop()
animation = self.make_execution_leave_animation()
animation.finished.connect(loop.quit)
animation.start()
if animation.state() == QParallelAnimationGroup.Running:
loop.exec_()
def event_loop(msec):
"""Event loop to show the GUI during a unit test.
https://www.qtcentre.org/threads/23541-Displaying-GUI-events-with-QtTest
"""
loop = QEventLoop()
timer = QTimer()
timer.timeout.connect(loop.quit)
timer.setSingleShot(True)
timer.start(msec)
loop.exec_()
def _run_leave_animation(self, item_name, direction, engine_state):
"""
Runs the animation that represents execution leaving this item.
Blocks until the animation is finished.
"""
if direction == ExecutionDirection.BACKWARD or engine_state != SpineEngineState.RUNNING:
return
loop = QEventLoop()
animation = self._make_execution_leave_animation(item_name)
animation.finished.connect(loop.quit)
animation.start()
if animation.state() == QParallelAnimationGroup.Running:
loop.exec_()
def fix_pyside_exec(namespace):
if namespace.get("__name__") == "AnyQt.QtWidgets":
from PySide2.QtWidgets import QApplication, QDialog, QMenu
if "exec" not in QApplication.__dict__:
QApplication.exec = lambda self: QApplication.exec_()
if not hasattr(QDialog, "exec"):
QDialog.exec = lambda self: QDialog.exec_(self)
if not hasattr(QMenu, "exec"):
QMenu.exec = lambda self: QMenu.exec_(self)
if namespace.get("__name__") == "AnyQt.QtGui":
from PySide2.QtGui import QGuiApplication, QDrag
if "exec" not in QGuiApplication.__dict__:
QGuiApplication.exec = lambda self: QGuiApplication.exec_()
if not hasattr(QDrag, "exec"):
QDrag.exec = (lambda self, *args, **kwargs: QDrag.exec_(
self, *args, **kwargs))
elif namespace.get("__name__") == "AnyQt.QtCore":
from PySide2.QtCore import QCoreApplication, QEventLoop, QThread
if not hasattr(QCoreApplication, "exec"):
QCoreApplication.exec = lambda self: QCoreApplication.exec_()
if not hasattr(QEventLoop, "exec"):
QEventLoop.exec = (lambda self, *args, **kwargs: QEventLoop.exec_(
self, *args, **kwargs))
if not hasattr(QThread, "exec"):
QThread.exec = lambda self: QThread.exec_(self)
elif namespace.get("__name__") == "AnyQt.QtPrintSupport":
from PySide2.QtPrintSupport import QPageSetupDialog, QPrintDialog
if "exec" not in QPageSetupDialog.__dict__:
QPageSetupDialog.exec = lambda self: QPageSetupDialog.exec_(self)
if "exec" not in QPrintDialog.__dict__:
QPrintDialog.exec = lambda self: QPrintDialog.exec_(self)
class PlayerMoveSignal(QObject):
def __init__(self, parent):
super(PlayerMoveSignal, self).__init__()
self.game = parent
self.sig = Signal(str)
self.eventLoop = QEventLoop(self)
self.data = None
@Slot(str)
def stop_waiting(self, data):
self.data = data
self.eventLoop.exit()
return
def wait_for_move(self):
self.eventLoop.exec_()
return self.data
def open(self, url, timeout=60):
"""Wait for download to complete and return result"""
loop = QEventLoop()
timer = QTimer()
timer.setSingleShot(True)
timer.timeout.connect(loop.quit)
self.loadFinished.connect(loop.quit)
self.load(QUrl(url))
timer.start(timeout * 1000)
loop.exec_() # delay here until download finished
if timer.isActive():
# downloaded successfully
timer.stop()
return self.html()
else:
# timed out
print('Request timed out:', url)
class EventLoop:
def __init__(self, timeout_in_second: float = None):
self.event = QEventLoop(None)
self.timeout_in_second = timeout_in_second
def quit(self):
self.event.quit()
def __enter__(self):
return self
def __exit__(self, *_):
if self.timeout_in_second is not None:
t = Timer()
t.timeout.connect(self.quit)
t.start(seconds=self.timeout_in_second)
self.event.exec_()
def wait_signal(signal, timeout=1):
"""Block loop until signal emitted, or timeout (s) elapses."""
loop = QEventLoop()
signal.connect(loop.quit)
yield
timed_out = []
if timeout is not None:
def quit_with_error():
timed_out.append(1)
loop.quit()
QTimer.singleShot(timeout * 1000, quit_with_error)
loop.exec_()
if timed_out:
assert False, "Timeout while waiting for %s" % signal
def open(self, url: str, timeout: int = 10):
"""Wait for download to complete and return result"""
loop = QEventLoop()
timer = QTimer()
timer.setSingleShot(True)
# noinspection PyUnresolvedReferences
timer.timeout.connect(loop.quit)
# noinspection PyUnresolvedReferences
self.loadFinished.connect(loop.quit)
self.load(QUrl(url))
# noinspection PyArgumentList
timer.start(timeout * 1000)
loop.exec_() # delay here until download finished
if timer.isActive():
# downloaded successfully
timer.stop()
else:
logger.info('Request timed out: %s' % url)
def _execute_forward(self, resources):
"""See base class."""
if not self._settings:
return True
absolute_paths = _files_from_resources(resources)
absolute_path_settings = dict()
for label in self._settings:
absolute_path = absolute_paths.get(label)
if absolute_path is not None:
absolute_path_settings[absolute_path] = self._settings[label]
source_settings = {
"GdxConnector": {
"gams_directory": self._gams_system_directory()
}
}
# Collect arguments for the importer_program
import_args = [
list(absolute_paths.values()),
absolute_path_settings,
source_settings,
[
r.url for r in self._resources_from_downstream
if r.type_ == "database"
],
self._logs_dir,
self._cancel_on_error,
]
if not self._prepare_importer_program(import_args):
self._logger.msg_error.emit(
f"Executing Importer {self.name} failed.")
return False
self._importer_process.start_execution()
loop = QEventLoop()
self.importing_finished.connect(loop.quit)
# Wait for finished right here
loop.exec_()
# This should be executed after the import process has finished
if not self._importer_process_successful:
self._logger.msg_error.emit(
f"Executing Importer {self.name} failed.")
else:
self._logger.msg_success.emit(
f"Executing Importer {self.name} finished")
return self._importer_process_successful
def wait_signal(signal, timeout=5000):
"""Block loop until signal emitted, or timeout (ms) elapses."""
loop = QEventLoop()
signal.connect(loop.quit)
yield
if timeout:
timer = QTimer()
timer.setInterval(timeout)
timer.setSingleShot(True)
timer.timeout.connect(loop.quit)
timer.start()
else:
timer = None
loop.exec_()
signal.disconnect(loop.quit)
if timer and timer.isActive():
timer.stop()
class ReadSerialPortsThread(QThread):
""" Find connected serial ports and send it to GUI """
add_serial_port = Signal(str)
remove_serial_port = Signal(str)
def __init__(self, parent=None):
QThread.__init__(self, parent)
self.current_port = ''
self.result = []
self.loop = ""
if _platform.startswith('linux'):
self.ports = ['/dev/ttyS%s' % (i + 1) for i in range(256)]
elif _platform.startswith('win32'):
self.ports = ['COM%s' % (i + 1) for i in range(256)]
elif _platform.startswith('darwin'):
self.ports = ['/dev/cu.serial%s' % (i + 1) for i in range(256)]
def run(self):
""" DOCSTRING """
while True:
for port in self.ports:
if port in self.result:
try:
serial_conn = serial.Serial(port)
serial_conn.close()
except (OSError, serial.SerialException):
if port != self.current_port:
self.result.remove(port)
self.remove_serial_port.emit(port)
else:
try:
serial_conn = serial.Serial(port)
serial_conn.close()
if port not in self.result:
self.result.append(port)
self.add_serial_port.emit(port)
except (OSError, serial.SerialException):
pass
self.loop = QEventLoop()
QTimer.singleShot(50, self.loop.quit)
self.loop.exec_()
def testBlockingSignal(self):
app = QCoreApplication.instance() or QCoreApplication([])
eventloop = QEventLoop()
emitter = Emitter()
receiver = Receiver(eventloop)
emitter.connect(emitter, SIGNAL("signal(int)"), receiver.receive,
Qt.BlockingQueuedConnection)
emitter.start()
retval = eventloop.exec_()
emitter.wait(2000)
self.assertEqual(retval, 0)
def testBlockingSignal(self):
app = QCoreApplication.instance() or QCoreApplication([])
eventloop = QEventLoop()
emitter = Emitter()
receiver = Receiver(eventloop)
emitter.connect(emitter, SIGNAL("signal(int)"),
receiver.receive, Qt.BlockingQueuedConnection)
emitter.start()
retval = eventloop.exec_()
emitter.wait()
self.assertEqual(retval, 0)
def main():
app = QApplication([])
webview = QWebEngineView()
loop = QEventLoop()
webview.loadFinished.connect(loop.quit)
webview.load(QUrl('http://example.webscraping.com/places/default/search'))
loop.exec_()
webview.show()
frame = webview.page().mainFrame()
frame.findFirstElement('#search_term').setAttribute('value', '.')
frame.findFirstElement('#page_size option:checked').setPlainText('1000')
frame.findFirstElement('#search').evaluateJavaScript('this.click()')
elements = None
while not elements:
app.processEvents()
elements = frame.findAllElements('#results a')
countries = [e.toPlainText().strip() for e in elements]
print(countries)
def _run_importer_program(self, args):
"""Starts and runs the importer program in a separate process.
Args:
args (list): List of arguments for the importer program
"""
self.importer_process = QProcess()
self.importer_process.readyReadStandardOutput.connect(self._log_importer_process_stdout)
self.importer_process.readyReadStandardError.connect(self._log_importer_process_stderr)
self.importer_process.finished.connect(self.importer_process.deleteLater)
program_path = os.path.abspath(importer_program.__file__)
self.importer_process.start(sys.executable, [program_path])
self.importer_process.waitForStarted()
self.importer_process.write(json.dumps(args).encode("utf-8"))
self.importer_process.write(b'\n')
self.importer_process.closeWriteChannel()
if self.importer_process.state() == QProcess.Running:
loop = QEventLoop()
self.importer_process.finished.connect(loop.quit)
loop.exec_()
return self.importer_process.exitCode()
def _execute_forward(self, resources):
"""See base class."""
from_urls = self._urls_from_resources(resources)
to_urls = self._urls_from_resources(self._resources_from_downstream)
if not from_urls or not to_urls:
# Moving on...
return True
combiner_args = [from_urls, to_urls, self._logs_dir, self._cancel_on_error]
if not self._prepare_combiner_program(combiner_args):
self._logger.msg_error.emit(f"Executing Combiner {self.name} failed.")
return False
self._combiner_process.start_execution()
loop = QEventLoop()
self.recombination_finished.connect(loop.quit)
# Wait for finished right here
loop.exec_()
# This should be executed after the import process has finished
if not self._combiner_process_successful:
self._logger.msg_error.emit(f"Executing Combiner {self.name} failed.")
else:
self._logger.msg_success.emit(f"Executing Combiner {self.name} finished")
return self._combiner_process_successful
def wait():
# loop = QEventLoop()
# QTimer.singleShot(delay * 1000, loop.quit)
# loop.exec_()
loop = QEventLoop()
timer = QTimer()
timer.setSingleShot(True)
timer.timeout.connect(loop.quit)
if append:
TIMER_RUNNING.append(timer)
LOOP_RUNNING.append(loop)
timer.start(delay * 1000)
loop.exec_()
TIMER_RUNNING.remove(timer)
LOOP_RUNNING.remove(loop)
else:
timer.start(delay * 1000)
loop.exec_()
def initCamera(self,
resolution=(640, 480),
monochrome=False,
framerate=24,
effect='none',
use_video_port=True):
# multiple streams are only possible eith the video port!
self.msg(self.name + "Init: resolution = " + str(resolution))
self.camera.resolution = resolution
self.camera.image_effect = effect
self.camera.image_effect_params = (2, )
self.camera.iso = 100 # should force unity analog gain
self.monochrome = monochrome # spoils edges
self.camera.framerate = framerate
if self.monochrome:
self.rawCapture = PiYArray(self.camera,
size=self.camera.resolution)
# self.PreviewArray = PiYArray(self.camera, size=(640,480))
self.stream = self.camera.capture_continuous(self.rawCapture,
format='yuv',
use_video_port=True,
splitter_port=0)
# self.previewStream = self.camera.capture_continuous(output=self.PreviewArray, format='yuv', use_video_port=True, splitter_port=1, resize=(640,480))
else:
self.rawCapture = PiRGBArray(self.camera,
size=self.camera.resolution)
# self.PreviewArray = PiRGBArray(self.camera, size=(640,480))
self.stream = self.camera.capture_continuous(self.rawCapture,
format='bgr',
use_video_port=True,
splitter_port=0)
# self.previewStream = self.camera.capture_continuous(output=self.PreviewArray, format='bgr', use_video_port=True, splitter_port=1, resize=(640,480))
GeneralEventLoop = QEventLoop(self)
QTimer.singleShot(2, GeneralEventLoop.exit)
GeneralEventLoop.exec_()
def test_duplicate_object_in_object_tree_model(self):
data = dict()
data["object_classes"] = ["fish", "dog"]
data["relationship_classes"] = [("fish__dog", ("fish", "dog"))]
data["objects"] = [("fish", "nemo"), ("dog", "pluto")]
data["relationships"] = [("fish__dog", ("nemo", "pluto"))]
data["object_parameters"] = [("fish", "color")]
data["object_parameter_values"] = [("fish", "nemo", "color", "orange")]
with mock.patch(
"spinetoolbox.spine_db_manager.SpineDBManager.entity_class_icon"
) as mock_icon:
mock_icon.return_value = None
loop = QEventLoop()
self.db_mngr.data_imported.connect(loop.quit)
self.db_mngr.import_data({self.db_map: data})
loop.exec_()
loop.deleteLater()
mock_icon.assert_called()
self.fetch_object_tree_model()
root_item = self.spine_db_editor.object_tree_model.root_item
fish_item = next(
iter(item for item in root_item.children
if item.display_data == "fish"))
nemo_item = fish_item.child(0)
with mock.patch(
"spinetoolbox.spine_db_editor.widgets.tree_view_mixin.QInputDialog"
) as mock_input_dialog:
mock_input_dialog.getText.side_effect = lambda *args, **kwargs: (
"nemo_copy", True)
loop = QEventLoop()
self.db_mngr.data_imported.connect(loop.quit)
self.spine_db_editor.duplicate_object(nemo_item.index())
loop.exec_()
loop.deleteLater()
nemo_dupe = fish_item.child(1)
self.assertEqual(nemo_dupe.display_data, "nemo_copy")
class Page(QWebEnginePage):
def __init__(self, view):
super(Page, self).__init__()
self.parent = view.parent
self.view = view
self.result = None
self.fullView = QWebEngineView()
self.exitFSAction = QAction(self.fullView)
self.loop = None
def javaScriptConsoleMessage(self, level, msg, line, sourceid):
"""Override javaScriptConsoleMessage to use debug log."""
if level == QWebEnginePage.InfoMessageLevel:
print("JS - INFO - Ligne {} : {}".format(line, msg))
elif level == QWebEnginePage.WarningMessageLevel:
print("JS - WARNING - Ligne {} : {}".format(line, msg))
else:
print("JS - ERROR - Ligne {} : {}".format(line, msg))
def hittestcontent(self, pos):
return WebHitTestResult(self, pos)
def maptoviewport(self, pos):
return QPointF(pos.x(), pos.y())
def executejavascript(self, scriptsrc):
self.loop = QEventLoop()
self.result = None
QTimer.singleShot(250, self.loop.quit)
self.runJavaScript(scriptsrc, self.callbackjs)
self.loop.exec_()
self.loop = None
return self.result
def callbackjs(self, res):
if self.loop is not None and self.loop.isRunning():
self.result = res
self.loop.quit()
def vsource(self):
if "view-source:http" in self.url().toString():
self.load(QUrl(self.url().toString().split("view-source:")[1]))
else:
self.triggerAction(self.ViewSource)
def makefullscreen(self, request):
if request.toggleOn():
self.fullView = QWebEngineView()
self.exitFSAction = QAction(self.fullView)
self.exitFSAction.setShortcut(Qt.Key_Escape)
self.exitFSAction.triggered.connect(
lambda: self.triggerAction(self.ExitFullScreen))
self.fullView.addAction(self.exitFSAction)
self.setView(self.fullView)
self.fullView.showFullScreen()
self.fullView.raise_()
else:
del self.fullView
self.setView(self.view)
request.accept()
class BatchProcessor():
signals = signal.signalClass()
GeneralEventLoop = None
SnapshotEventLoop = None
SnapshotTaken = False
is_active = False
well_positioner = None
Well_Map = None
Well_Targets = None
ID = str
info = str
duration = 0
interleave = 0
start_time = 0
end_time = 0
logging = True
## @brief BatchProcessor()::__init__ sets the batch settings
## @param well_controller is the well positioning class instance used to position the wells under the camera.
## @param well_map is the list of target wells with their positions in mm of both row and column.
## @param well_targets is the list of the target wells with their column and row index positions and ID.
## @param ID is the batch ID.
## @param info is the batch information.
## @param dur is the batch duration.
## @param interl is the time between the photographing of each well.
def __init__(self, well_controller, well_map, well_targets, ID, info, path,
dur, interl):
#super().__init__()
self.is_active = False
self.well_positioner = well_controller
self.Well_Map = well_map
self.Well_Targets = well_targets
self.batch_id = ID
self.batch_info = info
self.duration = dur
self.interleave = interl
self.path = os.path.sep.join([path, ID])
if not os.path.exists(self.path):
os.makedirs(self.path)
## @brief BatchProcessor()::msg emits the message signal. This emit will be catched by the logging slot function in main.py.
## @param message is the string message to be emitted.
@Slot(str)
def msg(self, message):
if message:
self.signals.mes.emit(self.__class__.__name__ + ": " +
str(message))
return
## @brief BatchProcessor()::updateBatchSettings(self, well_data, ID, info, dur, interl) can be called to update the batch settings during runtime.
## @todo well_data update in MainWindow.
## @depricated, BatchProcessor::updateBatchSettings not in use yet. Function might be usefull when updating the batch.ini via the GUI.
## @param well_data is the list of target wells with their positions/indexes.
## @param ID is the batch ID.
## @param info is the batch information.
## @param dur is the batch duration.
## @param interl is the time between the photographing of each well.
def updateBatchSettings(self, well_map, well_targets, ID, info, dur,
interl):
self.is_active = False
self.Well_Map = well_map
self.Well_Targets = well_targets
self.batch_id = ID
self.batch_info = info
self.duration = dur
self.interleave = interl
return
## @brief BatchProcessor()::startBatch(self) starts the batch process by setting the current (start)time and the endtime.
## It disables the manual motor control and emits the batch_active signal
## @todo call updateBatchSettings function
@Slot()
def startBatch(self):
self.start_time = current_milli_time()
self.end_time = current_milli_time() + (self.duration * 1000)
self.well_positioner.reset_current_well()
self.signals.batch_active.emit()
self.is_active = True
self.msg("Batch process initialized and started with:\n\tDuration: " +
str(self.duration) + "\n\tInterleave: " +
str(self.interleave) + "\n\tStart_time: " +
str(self.start_time) + "\n\tEnd_time: " + str(self.end_time))
print("Batch process initialized and started with:\n\tDuration: " +
str(self.duration) + "\n\tInterleave: " + str(self.interleave) +
"\n\tStart_time: " + str(self.start_time) + "\n\tEnd_time: " +
str(self.end_time))
self.runBatch()
return
## @brief BatchProcessor()::runBatch(self) runs the batch after it is started.
## @note the interleave is actually the interleave + processingtime of the "for target in self.Well_Targets:" loop
def runBatch(self):
if self.logging:
recording_file_name = os.path.sep.join(
[self.path, 'batch_positioning_results.csv'])
recording_file = open(recording_file_name, "w")
# build csv file heading
record_str = "run_start_time, run_time,"
for target in self.Well_Targets:
record_str += ',' + str(
self.Well_Map[target[0][1]][1][1]) + ',' + str(
self.Well_Map[1][target[0][0]][0])
recording_file.write(record_str + "\n")
else:
recording_file = None
first_run = True
while True:
print("BatchProcessor thread check: " +
str(QThread.currentThread()))
## Run start time
run_start_time = current_milli_time()
actual_postions = []
# Home first on avery run
self.well_positioner.stepper_control.homeXY()
for target in self.Well_Targets:
if not self.is_active:
self.signals.batch_inactive.emit()
self.msg("Batch stopped.")
print("Batch stopped.")
return
else:
row = target[0][0]
column = target[0][1]
self.msg("Target: " + str(target[0][2]))
## print("Target: at (" + str(self.Well_Map[column][1][1]) + ", " + str(self.Well_Map[1][row][0]) +")" + ", first run: " + str(first_run))
if (self.well_positioner.goto_well(
self.Well_Map[column][1][1],
self.Well_Map[1][row][0],
first_run)): ## if found well
self.snapshot_request(
str(self.batch_id) + "/" + str(target[0][2]))
(self.Well_Map[1][row][0], self.Well_Map[column][1][1]
) = self.well_positioner.get_current_well()
print(" Target adapted to (" +
str(self.Well_Map[column][1][1]) + ", " +
str(self.Well_Map[1][row][0]) + ")")
actual_postions.append(
self.well_positioner.get_current_well())
while self.SnapshotTaken is False:
if not self.is_active:
self.signals.batch_inactive.emit()
#self.msg("Batch stopped, breaking out of SnapshotTaken is False while loop.")
print(
"Batch stopped, breaking out of SnapshotTaken is False while loop."
)
return
print("Waiting in snapshot loop")
self.wait_ms(50)
self.msg(str(target) + " finished.")
print(str(target) + " finished.")
if self.end_time < current_milli_time():
self.msg("batch completed")
print("batch completed")
self.signals.batch_inactive.emit()
self.stopBatch()
return
else:
self.msg("Remaining time " +
str(self.end_time - current_milli_time()))
print("Remaining time " +
str(self.end_time - current_milli_time()) + " ms")
# first run is completed, remove this statemant to adapt to well-position in stead of feedforward
if actual_postions:
first_run = False
run_time = current_milli_time() - run_start_time
self.msg("Run time: " + str(run_time))
print("Run time: " + str(run_time) + "\nWaiting for " +
str(self.interleave * 1000 - run_time) + " ms")
if self.interleave * 1000 - run_time < 0:
self.msg(
"To short interleave, please increase the interleave to at least: "
+ str(run_time))
print(
"To short interleave, please increase the interleave to at least: "
+ str(run_time))
else:
## Wait for the specified interleave minus the run_time of one run
self.msg("Waiting for: " +
str(self.interleave * 1000 - run_time) + " ms")
print("Waiting for: " +
str(self.interleave * 1000 - run_time) + " ms")
self.wait_ms(self.interleave * 1000 - run_time)
if recording_file:
record_str = str(run_start_time) + ',' + str(run_time)
for actual_position in actual_postions:
record_str += ',' + str(actual_position[0]) + ',' + str(
actual_position[1])
print(record_str)
recording_file.write(record_str + "\n")
if recording_file:
recording_file.close()
#self.msg("Breaking out batch process")
print("Finishing batch process")
return
## @brief BatchProcessor()::wait_ms(self, milliseconds) is a delay function.
## @param milliseconds is the number of milliseconds to wait.
def wait_ms(self, milliseconds):
self.GeneralEventLoop = QEventLoop()
QTimer.singleShot(milliseconds, self.GeneralEventLoop.exit)
self.GeneralEventLoop.exec_()
return
## @brief BatchProcessor()::snapshot_request(self, message) emits the self.signals.snapshot_requested signal.
## @param message is the pathname of the desired snapshot
def snapshot_request(self, message):
self.msg("Requesting snapshot")
self.signals.snapshot_requested.emit(message)
self.snapshot_await()
return
## @brief StepperWellPositioning()::snapshot_await(self) runs an eventloop while the new snapshot is not stored in self.image yet.
def snapshot_await(self):
self.SnapshotTaken = False
while self.is_active and not self.SnapshotTaken:
#self.msg("Waiting for snapshot")
self.SnapshotEventLoop = QEventLoop()
QTimer.singleShot(10, self.SnapshotEventLoop.exit)
self.SnapshotEventLoop.exec_()
return
@Slot()
def snapshot_confirmed(self):
self.SnapshotTaken = True
if not (self.SnapshotEventLoop is None):
self.SnapshotEventLoop.exit()
return
## @brief BatchProcessor()::stopBatch is a slot function which is called when the button stopBatch is pressed on the MainWindow GUI.
## It stops the batch process and resets the wait eventloop if running.
@Slot()
def stopBatch(self):
#self.msg("Stopping Batch process")
print("Stopping Batch process")
self.signals.batch_inactive.emit()
self.signals.process_inactive.emit(
) ## Used to stop positioning process of function StepperWellPositioning::goto_target
self.is_active = False
self.snapshot_confirmed()
if not (self.GeneralEventLoop is None):
self.GeneralEventLoop.exit()
print("Exit BatchProcessor::GeneralEventloop")
if not (self.SnapshotEventLoop is None):
self.SnapshotEventLoop.exit()
print("Exit BatchProcessor::SnapshotEventLoop")
return
@Slot()
def close(self):
self.stopBatch()
return
def wait_ms(self, milliseconds):
GeneralEventLoop = QEventLoop()
QTimer.singleShot(milliseconds, GeneralEventLoop.exit)
GeneralEventLoop.exec_()
return
class StepperWellPositioning():
signals = signal.signalClass()
process_activity = False
stepper_control = None ## object StepperControl instance
current_well_row = None
current_well_column = None
Stopped = True
GeneralEventLoop = None
SnapshotEventLoop = None
SnapshotTaken = False
image = np.ndarray
image_area = None
WPE = None
WPE_target = None
WPE_targetRadius = None
Well_Map = None
diaphragm_diameter = 12.0 ## mm
## @brief StepperWellPositioning()::__init__ initialises the stepper objects for X and Y axis and initialises the gcodeSerial to the class member variable.
## @param steppers is the StepperControl object representing the X- and Y-axis
## @param Well_data contains the target well specified by the user in the batch.ini file
def __init__(self, steppers, Well_data, record_path):
self.stepper_control = steppers
self.Well_Map = Well_data
log_fine_tuning = False if record_path is None else True
self.path = record_path
return
## @brief StepperWellPositioning()::msg emits the message signal. This emit will be catched by the logging slot function in main.py.
## @param message is the string message to be emitted.
@Slot(str)
def msg(self, message):
if message is not None:
self.signals.mes.emit(self.__class__.__name__ + ": " +
str(message))
return
## @brief StepperWellPositioning()::reset_current_well(self) sets the current well position (XY) to None
def reset_current_well(self):
self.set_current_well(None, None)
return
## @brief StepperWellPositioning()::set_current_well(self) sets the current well position.
## @param column is the column or x well coordinate
## @param row is the row or y well coordinate
def set_current_well(self, column, row):
self.current_well_column = column
self.current_well_row = row
return
## @brief StepperWellPositioning()::get_current_well(self) is the well position getter.
## @return current_well_column (x position in mm from home) and current_well_row (y position in mm from home).
def get_current_well(self):
if self.current_well_column == None or self.current_well_row == None:
self.current_well_column = None
self.current_well_row = None
return self.current_well_column, self.current_well_row
## @brief StepperWellPositioning()::wait_ms(self, milliseconds) is a delay function.
## @param milliseconds is the number of milliseconds to wait.
def wait_ms(self, milliseconds):
GeneralEventLoop = QEventLoop()
QTimer.singleShot(milliseconds, GeneralEventLoop.exit)
GeneralEventLoop.exec_()
return
## @brief StepperWellPositioning()::goto_well(self, row, column):
## @author Robin Meekers
## @author Gert van Lagen (ported to new prototype which makes use of the Wrecklab PrintHAT)
@Slot()
def goto_well(self, row, column, adapt_to_well=False):
print("In goto_well function")
print(" adapt to well is " + str(adapt_to_well))
## self.stepper_control.enableMotors()
self.signals.process_active.emit()
self.Stopped = False
self.stepper_control.setLightPWM(1.0)
## If the Well Position Evaluator is not initialized.
if self.WPE is None:
## define the resolution of the received images to be entered into the evaluator.
self.snapshot_request()
self.snapshot_await()
self.WPE_target = (int(self.image.shape[1] / 2),
int(self.image.shape[0] / 2))
self.WPE = imageProcessor.WellPositionEvaluator(
(self.image.shape[0], self.image.shape[1]))
self.msg("Current well: " + str(self.get_current_well()))
current_row, current_column = self.get_current_well()
## Position unknown
if current_row is None or current_column is None:
## Need to go to home position first
self.msg("Current position unknown. Moving to home...")
self.stepper_control.homeXY()
## If homing is succeeded and confirmed by the STM of the Wrecklab PrintHAT
if self.stepper_control.homing_confirmed:
self.image = None
self.snapshot_request()
self.snapshot_await()
self.wait_ms(
1000) ## Wait for the snapshot to be stored in self.image
## Arrived at home, move to first well.
## The exact centre of the image can more easily be determined at the home position,
## as there is no distortion in the image by light refracting.
self.msg("Looking for light source...")
WPE_Error = self.WPE.evaluate(self.image, (int(
self.image.shape[1] / 2), int(self.image.shape[0] / 2)))
self.msg("Found light-source at: (" + str(WPE_Error[0][0]) +
" | " + str(WPE_Error[0][1]) + "). Radius: " +
str(WPE_Error[2]))
self.WPE_targetRadius = WPE_Error[2]
self.WPE_target = (int(self.image.shape[1] / 2) +
WPE_Error[0][0],
int(self.image.shape[0] / 2) +
WPE_Error[0][1])
self.msg("WPE_target: " + str(self.WPE_target[0]) + " | " +
str(self.WPE_target[1]))
self.signals.target_located.emit(
(self.WPE_target[0], self.WPE_target[1],
self.WPE_targetRadius))
self.WPE.circle_minRadius = int(
self.WPE_targetRadius * 0.8
) ## Roughly the amount remaining if the target is on the edge between wells.
self.WPE.circle_maxRadius = int(
self.WPE_targetRadius
) ## The well can never be larger than the diaphragm of the light source.
## ## Homing succeeded, light source found, lets move to the first target of Well_map
## self.set_current_well(column, row)
## self.stepper_control.moveToWell(column, row)
self.signals.first_move.emit()
else:
return False
## position known
if self.process_activity:
# JV: column and row is probably X and Y in Robin's functions, also in Gert's functions?
self.stepper_control.moveToWell(column, row)
## Wait for ms depending on moving distance, JV:why?
if self.current_well_column is None or self.current_well_row is None:
dist = 60
else:
dist = math.sqrt(
float(
abs(float(column) - float(self.current_well_column)) *
abs(float(column) - float(self.current_well_column))) +
float(
abs(float(row) - float(self.current_well_row)) *
abs(float(row) - float(self.current_well_row))))
self.msg("Moving distance: " + str(dist))
if dist < 20:
self.msg("Delay: 1999ms | dist: " + str(dist) + "mm")
self.wait_ms(1999)
elif dist < 50:
self.msg("Delay: 3999ms | dist: " + str(dist) + "mm")
self.wait_ms(3999)
elif dist < 70:
self.msg("Delay: 5999ms | dist: " + str(dist) + "mm")
self.wait_ms(5999)
elif dist < 85:
self.msg("Delay: 8999ms | dist: " + str(dist) + "mm")
self.wait_ms(8999)
elif dist > 85:
self.msg("Delay: 11999ms | dist: " + str(dist) + "mm")
self.wait_ms(11999)
else:
self.msg("Delay: 4999ms | Unknown dist: " + str(dist) + "mm")
self.wait_ms(4999)
self.set_current_well(column, row)
print(
str(self.WPE_target[0]) + " | " + str(self.WPE_target[1]) +
" first run " + str(adapt_to_well))
if adapt_to_well:
self.goto_target()
else:
self.wait_ms(
2000) ## Wait for the snapshot to be stored in self.image
self.msg("Well positioning succeeded.")
## Manual confirmation needed. STM is too fast for the software to catch the last confirmation.
self.stepper_control.move_confirmed = True
## if not self.goto_target():
## self.msg("Well positioning not succeeded.")
## self.set_current_well(None, None) ## Never reached reference point
## self.Stopped = True
## self.signals.process_inactive.emit()
##
## ## Manual confirmation needed. STM is too fast for the software to catch the last confirmation.
## self.stepper_control.move_confirmed = True
## return False
## else:
## self.msg("Well positioning succeeded.")
## ## Manual confirmation needed. STM is too fast for the software to catch the last confirmation.
## self.stepper_control.move_confirmed = True
else:
print(
"Positioning process inactive, cannot call goto_target positioning controller function."
)
self.msg(
"Positioning process inactive, cannot call goto_target positioning controller function."
)
## Different row?
if row != self.current_well_row or column != self.current_well_column:
self.msg("moving from: (" + str(self.current_well_row) + " | " +
str(self.current_well_column) + ") to: (" + str(row) +
" | " + str(column) + ")")
## why can we not re-enable motors during steps? Because M17 is not implemented by Klipper
## self.stepper_control.disableMotors()
self.stepper_control.setLightPWM(0.0)
return True
## @brief StepperWellPositioning()::goto_target(self) evaluates the target circle using class Well_Position_Evaluator, updates the snapshot,
## and corrects the position of the well while not aligned with the light source.
def goto_target(self):
loops_ = 0
error_count = 0
WPE_Error = None
new_column = 0
new_row = 0
error_threshold = 100 #50#120 # higher number means lower error...
resolution = self.diaphragm_diameter / self.WPE_targetRadius # [mm/px]
run_start_time = current_milli_time()
if self.path is not None:
column, row = self.get_current_well()
log_file_name = '_'.join([
str(run_start_time), 'goto_target',
str(round(column)),
str(round(row))
])
recording_file_name = os.path.sep.join([self.path, log_file_name])
recording_file = open(recording_file_name, "w")
record_str = "run_time, WPE_target[0], WPE_target[1], WPE_Error[0][0], WPE_Error[0][1]"
recording_file.write(record_str + "\n")
else:
recording_file = None
## Do while the well is not aligned with the light source.
while True:
if (self.stepper_control.move_confirmed):
if not self.process_activity:
#self.msg("!Returning from alignment controller loop in StepperWellPositioning::goto_target")
print(
"!Returning from alignment controller loop in StepperWellPositioning::goto_target"
)
return False
## Wait for image to stabilize and request new snapshot
self.wait_ms(2000)
self.snapshot_request()
## Wait for snapshot to be stored in self.image
self.wait_ms(1000)
## Evaluate current wellposition relative to the light source.
WPE_Error = self.WPE.evaluate(self.image, self.WPE_target)
self.msg("WPE target at (" + str(self.WPE_target[0]) + " | " +
str(self.WPE_target[1]) + ")")
## Area error, surface smaller or equal to 0
if WPE_Error[1] <= 0:
self.msg(
"Possibly something wrong with captured frame, retry with another snapshot"
)
error_count = error_count + 1
if (error_count >= 3):
self.msg("Error_count = " + str(error_count))
return False
continue
else:
self.msg("Well found at offset (" + str(WPE_Error[0][0]) +
" | " + str(WPE_Error[0][1]) + ")")
self.signals.well_located.emit(
(self.WPE_target[0] + WPE_Error[0][0],
self.WPE_target[1] + WPE_Error[0][1], WPE_Error[2]))
# ## Some
# error_count = 0
# if (abs(WPE_Error[0][0]-30) < (self.image.shape[0] / error_threshold) and abs(WPE_Error[0][1]+30) < (self.image.shape[0] / error_threshold)) or (loops_ >20): ## No more adjustments to make or system is oscilating
# if loops_ > 20:loops_
# self.msg("More than 20 correction loops, return False")
# return False
# self.msg("Returning from positioner controller, loops: " + str(loops_))
# return True
## Define controller variables for column and row | x and y.
## new_column = float(WPE_Error[0][0]) / ((loops_+1)*20.0)
## new_row = float(WPE_Error[0][1]) / ((loops_+1)*15.0)
## column, row = self.get_current_well()
run_time = current_milli_time() - run_start_time
if recording_file is not None:
record_str = str(run_time) + ',' + str(
self.WPE_target[0]) + ',' + str(
self.WPE_target[1]) + ',' + str(
WPE_Error[0][0]) + ',' + str(WPE_Error[0][1])
recording_file.write(record_str + "\n")
error = np.sqrt(WPE_Error[0][0]**2 + WPE_Error[0][1]**2)
threshold = min(self.image.shape[0:1]) / error_threshold
print(" well placement error: {}, while acceptable error:{}".
format(error, threshold))
if error > threshold:
# Decrease stepsize on each iteration for smooth convergence
new_column = float(
WPE_Error[0][0]) * resolution / (loops_ + 1)
new_row = float(
WPE_Error[0][1]) * resolution / (loops_ + 1)
column, row = self.get_current_well()
new_column += column
new_row += row
new_column = round(new_column, 1)
new_row = round(new_row, 1)
self.stepper_control.moveToWell(new_column, new_row)
self.set_current_well(new_column, new_row)
else:
break
loops_ += 1
if loops_ > 5:
self.msg("Too many correction loops, giving up")
break
if not self.process_activity:
#self.msg("Returning from alignment controller loop in StepperWellPositioning::goto_target")
print(
"Returning from alignment controller loop in StepperWellPositioning::goto_target"
)
return False
if recording_file:
recording_file.close()
return True
## @brief StepperWellPositioning()::snapshot_request(self) emits the snapshot_request signal
def snapshot_request(self):
self.signals.snapshot_requested.emit(str((1, 1)))
## @brief StepperWellPositioning()::snapshot_awiat(self) runs an eventloop while the new snapshot is not stored in self.image yet.
def snapshot_await(self):
self.SnapshotTaken = False
while not self.Stopped and not self.SnapshotTaken:
self.SnapshotEventLoop = QEventLoop()
QTimer.singleShot(10, self.SnapshotEventLoop.exit)
self.SnapshotEventLoop.exec_()
## @brief StepperWellPositioning()::snapshot_confirmed(self, snapshot) exits the event loop of snapshot_await when the new image is arived.
## It updates the self.image variable with the new variable and defines the image area and WPE_target.
@Slot(np.ndarray)
def snapshot_confirmed(self, snapshot):
self.image = snapshot
# self.WPE_target = (int(self.image.shape[1] / 2), int(self.image.shape[0] / 2))
self.image_area = int((self.image.shape[0] * self.image.shape[1]))
self.SnapshotTaken = True
if not (self.SnapshotEventLoop is None):
self.SnapshotEventLoop.exit()
return
## @brief StepperWellPositioning()::setProcessInactive(self) disables the positionings process if the signal is emitted.
@Slot()
def setProcessInactive(self):
#self.msg("Disabled positioning process activity")
print("Disabled positioning process activity")
self.process_activity = False
self.Stopped = True
if not (self.GeneralEventLoop is None):
self.GeneralEventLoop.exit()
#self.msg("Exit StepperWellPositioning::GeneralEventloop")
print("Exit StepperWellPositioning::GeneralEventloop")
if not (self.SnapshotEventLoop is None):
self.SnapshotEventLoop.exit()
#self.msg("Exit StepperWellPositioning::SnapshotEventLoop")
print("Exit StepperWellPositioning::SnapshotEventLoop")
return
## @brief StepperWellPositioning()::setProcessActive(self) enables the positionings process if the signal is emitted.
@Slot()
def setProcessActive(self):
self.process_activity = True
self.Stopped = False
return
@Slot()
def close(self):
self.stepper_control.setLightPWM(0.0)
self.stepper_control.setFanPWM(0.0)
self.process_activity = False
self.Stopped = True
return
class MakeSerialConnection(QThread):
""" Connect to selected serial port, receive data and send it to proper tabs """
start_btn_state = Signal(bool)
stop_btn_state = Signal(bool)
baud_box_state = Signal(bool)
port_box_state = Signal(bool)
board_box_state = Signal(bool)
time_edit_state = Signal(bool)
wifi_check_state = Signal(bool)
blue_check_state = Signal(bool)
serial_port_placeholder = Signal(str)
serial_port_clear = Signal()
send_text_signal = Signal(str)
conn_stat_text = Signal(str)
conn_stat_style = Signal(str)
clear_wifi_list = Signal()
clear_blue_list = Signal()
append_wifi_list_item = Signal(QListWidgetItem)
append_blue_list_item = Signal(QListWidgetItem)
append_wifi_timeline_data = Signal(list)
save_wifi_timeline_data = Signal(tuple)
clear_wifi_series = Signal()
add_wifi_series = Signal(QtCharts.QLineSeries)
set_axis_y_series = Signal(QtCharts.QLineSeries)
set_axis_x_series = Signal(QtCharts.QLineSeries)
wifi_data_to_func = Signal(dict)
wifi_data_to_func_graph = Signal(dict)
wifi_data_to_func_time = Signal(dict)
blue_data_to_func = Signal(dict)
def __init__(self, parent=None):
super(MakeSerialConnection, self).__init__(parent)
self.current_port = ''
self.current_baud = 9600
self.current_board = 'ESP32'
self.current_time = 10000
self.wifi_scan_status = True
self.blue_scan_status = False
self.first_conn = True
self.arduino = ''
self.loop = ''
self.reading = True
self.data_collection = False
self.blue_data_collection = False
self.collected_data = {}
self.collected_blue_data = {}
self.default_array = []
self.default_tupple = ()
self.final_tuple = ()
self.save_data_to_db = False
self.channels_occ = {
1: [1, 2],
2: [1, 2, 3],
3: [2, 3, 4],
4: [3, 4, 5],
5: [4, 5, 6],
6: [5, 6, 7],
7: [6, 7, 8],
8: [7, 8, 9],
10: [9, 10, 11],
11: [10, 11, 12],
12: [11, 12, 13],
13: [12, 13]
}
self.current_lang = 'English'
def run(self):
""" DOCSTRING """
if self.first_conn is True:
self.arduino = serial.Serial(self.current_port,
self.current_baud,
write_timeout=1)
self.disable_settings_options(False)
self.send_config_to_esp()
else:
self.show_status_reconnect()
self.disable_settings_options(False)
self.loop = QEventLoop()
QTimer.singleShot(5000, self.loop.quit)
self.loop.exec_()
self.arduino = serial.Serial(self.current_port,
self.current_baud,
write_timeout=1)
self.send_config_to_esp()
self.reading = True
while self.reading is True:
self.show_status_connected()
try:
data = self.arduino.readline()[:-1].decode(encoding='utf-8',
errors="replace")
if data.split() == ['[CFG]BOARD_ERROR']:
self.show_status_wrong_board()
self.send_text_signal.emit(
'Selected wrong board! Disconnected')
self.stop_serial_communication()
if data.split() == ['[SCN]WIFI_START_SCAN'
] or self.data_collection is True:
if self.data_collection is True and data.split() != [
'[SCN]WIFI_STOP_SCAN'
]:
if len(data) > 1:
self.collected_data[str(data.split(" | ")[1])] = [
int(data.split(" | ")[2]),
int(data.split(" | ")[3]),
str(data.split(" | ")[4]),
str(data.split(" | ")[5]),
str(data.split(" | ")[6])
]
elif data.split() == ['[SCN]WIFI_STOP_SCAN']:
self.data_collection = False
self.wifi_data_to_func.emit(self.collected_data)
else:
self.collected_data = {}
self.data_collection = True
if data.split() == ['[SCN]BLUE_START_SCAN'
] or self.blue_data_collection is True:
if (self.blue_data_collection is True
and data.split() != ['[SCN]BLUE_STOP_SCAN']):
if data.split()[0] == 'DEV':
if len(data) > 1:
# Data template: DEV | Name | RSSI | MAC | MSG
self.collected_blue_data[str(
data.split(" | ")[1])] = [
str(data.split(" | ")[2]),
int(data.split(" | ")[3]),
str(data.split(" | ")[4])
]
elif data.split() == ['[SCN]BLUE_STOP_SCAN']:
self.blue_data_collection = False
self.blue_data_to_func.emit(self.collected_blue_data)
else:
self.blue_data_collection = True
self.send_text_signal.emit(data)
except serial.SerialException:
self.show_status_uart_error()
self.send_text_signal.emit(
'Disconnect of USB->UART occured.\nRestart needed!')
self.stop_serial_communication()
self.arduino.close()
def send_config_to_esp(self):
"""send config to ESP"""
self.arduino.write("[CFG]START".encode())
self.arduino.write("\n".encode())
self.arduino.write(
str("[CFG]BOARD=" + self.current_board + "").encode())
self.arduino.write("\n".encode())
self.arduino.write(
str("[CFG]TIME=" + str(self.current_time) + "").encode())
self.arduino.write("\n".encode())
self.arduino.write(
str("[CFG]WIFI_SCAN=" + str(self.wifi_scan_status).upper() +
"").encode())
self.arduino.write("\n".encode())
self.arduino.write(
str("[CFG]BLUE_SCAN=" + str(self.blue_scan_status).upper() +
"").encode())
self.arduino.write("\n".encode())
self.arduino.write("[CFG]STOP\n".encode())
self.arduino.write("\n".encode())
self.arduino.write("[SCN]START".encode())
self.arduino.write("\n".encode())
def stop_serial_communication(self):
""" Stop reading from serial port """
self.reading = False
self.first_conn = False
self.arduino.close()
self.disable_settings_options(True)
self.show_status_disconnected()
def get_curr_port(self, port):
""" Get selected serial port """
self.current_port = str(port)
def get_curr_baud(self, baud):
""" DOCSTRING """
self.current_baud = int(baud)
def get_curr_board(self, board):
""" DOCSTRING """
self.current_board = str(board)
def get_curr_time(self, user_time):
""" DOCSTRING """
self.current_time = (
int(user_time.toString("m:ss").split(":")[0]) * 60 +
int(user_time.toString("m:ss").split(":")[1])) * 1000
def get_wifi_check(self, state):
""" DOCSTRING """
self.wifi_scan_status = state
def get_blue_check(self, state):
""" DOCSTRING """
self.blue_scan_status = state
def set_style_sheet(self, color):
""" Set stylesheet for connection status label """
return "background: " + color + "; color: white; font-size: 14px; border-width: 1px; \
border-style: solid; border-radius: 2px; border-color: " + color + ";"
def show_status_connected(self):
""" Show connected status in MainWindow class """
self.start_btn_state.emit(False)
self.stop_btn_state.emit(True)
if self.current_lang == "Polski":
self.conn_stat_text.emit('Połączono')
else:
self.conn_stat_text.emit('Connected')
self.conn_stat_style.emit(self.set_style_sheet('green'))
def show_status_disconnected(self):
""" Show disconnected status in MainWindow class """
self.start_btn_state.emit(True)
self.stop_btn_state.emit(False)
if self.current_lang == "Polski":
self.conn_stat_text.emit('Rozłączono')
else:
self.conn_stat_text.emit('Disconnected')
self.conn_stat_style.emit(self.set_style_sheet('red'))
def show_status_uart_error(self):
""" Show UART error status in MainWindow """
self.start_btn_state.emit(False)
self.stop_btn_state.emit(True)
if self.current_lang == "Polski":
self.conn_stat_text.emit('Rozłączono. Wymagany restart')
else:
self.conn_stat_text.emit(
'Disconnect of USB->UART occured. Need restart')
self.conn_stat_style.emit(self.set_style_sheet('orange'))
def show_status_wrong_board(self):
""" Show selected wrong board status in MainWindow """
self.start_btn_state.emit(False)
self.stop_btn_state.emit(True)
if self.current_lang == "Polski":
self.conn_stat_text.emit('Wybrano złą płytkę!')
else:
self.conn_stat_text.emit('Selected wrong board!')
self.conn_stat_style.emit(self.set_style_sheet('red'))
def show_status_reconnect(self):
""" Show reconnect status in MainWindow """
self.start_btn_state.emit(False)
self.stop_btn_state.emit(False)
if self.current_lang == "Polski":
self.conn_stat_text.emit('Ponowne łączenie... Czekaj 5s')
else:
self.conn_stat_text.emit('Reconnecting... Wait 5s')
self.conn_stat_style.emit(self.set_style_sheet('orange'))
@Slot(dict)
def append_wifi_data(self, data):
""" Append data to list in WiFi list tab """
self.clear_wifi_list.emit()
i = 1
for i in data:
if self.current_lang == "Polski":
item = QListWidgetItem(
'BSID: ' + str(i) + ' \nKanał: ' + str(data[i][1]) +
' \nRSSI: ' + str(data[i][0]) + ' dBm \nMAC: ' +
str(data[i][3]) + ' (Producent: ' +
str(manu.search_manufacturer_by_mac(str(data[i][3]))) +
')')
else:
item = QListWidgetItem(
'BSID: ' + str(i) + ' \nChannel: ' + str(data[i][1]) +
' \nRSSI: ' + str(data[i][0]) + ' dBm \nMAC: ' +
str(data[i][3]) + ' (Manufacturer: ' +
str(manu.search_manufacturer_by_mac(str(data[i][3]))) +
')')
if int(abs(data[i][0])) < 50:
item.setIcon(QIcon('icons/icons8-no-connection-64-green.png'))
elif int(abs(data[i][0])) >= 50 and int(abs(data[i][0])) < 70:
item.setIcon(QIcon('icons/icons8-no-connection-64-blue.png'))
elif int(abs(data[i][0])) >= 70 and int(abs(data[i][0])) < 80:
item.setIcon(QIcon('icons/icons8-no-connection-64-orange.png'))
elif int(abs(data[i][0])) >= 80 and int(abs(data[i][0])) < 90:
item.setIcon(QIcon('icons/icons8-no-connection-64-red.png'))
elif int(abs(data[i][0])) >= 90:
item.setIcon(QIcon('icons/icons8-no-connection-64-black.png'))
self.append_wifi_list_item.emit(item)
self.loop = QEventLoop()
QTimer.singleShot(50, self.loop.quit)
self.loop.exec_()
@Slot(dict)
def append_blue_data(self, data):
""" DOCSTRING """
self.clear_blue_list.emit()
i = 1
for i in data:
if self.current_lang == "Polski":
item = QListWidgetItem('Nazwa: ' + str(i) + ' \nMAC: ' +
str(data[i][0].upper()) + ' \nRSSI: ' +
str(data[i][1]) + ' dBm\nProducent: ' +
str(
manu.search_manufacturer_by_mac(
str(data[i][0].upper()))) + '')
else:
item = QListWidgetItem('Name: ' + str(i) + ' \nMAC: ' +
str(data[i][0].upper()) + ' \nRSSI: ' +
str(data[i][1]) +
' dBm\nManufacturer: ' + str(
manu.search_manufacturer_by_mac(
str(data[i][0].upper()))) + '')
if int(abs(data[i][1])) < 50:
item.setIcon(QIcon('icons/icons8-no-connection-64-green.png'))
elif int(abs(data[i][1])) >= 50 and int(abs(data[i][1])) < 70:
item.setIcon(QIcon('icons/icons8-no-connection-64-blue.png'))
elif int(abs(data[i][1])) >= 70 and int(abs(data[i][1])) < 80:
item.setIcon(QIcon('icons/icons8-no-connection-64-orange.png'))
elif int(abs(data[i][1])) >= 80 and int(abs(data[i][1])) < 90:
item.setIcon(QIcon('icons/icons8-no-connection-64-red.png'))
elif int(abs(data[i][1])) >= 90:
item.setIcon(QIcon('icons/icons8-no-connection-64-black.png'))
self.append_blue_list_item.emit(item)
self.loop = QEventLoop()
QTimer.singleShot(50, self.loop.quit)
self.loop.exec_()
def disable_settings_options(self, state):
""" DOCSTRING """
self.port_box_state.emit(state)
self.baud_box_state.emit(state)
self.board_box_state.emit(state)
self.time_edit_state.emit(state)
self.wifi_check_state.emit(state)
self.blue_check_state.emit(state)
if state is False:
self.serial_port_placeholder.emit(self.current_port)
else:
self.serial_port_clear.emit()
@Slot(dict)
def append_data_to_wifi_graph(self, wifi_dict):
"""DOCSTRING"""
self.clear_wifi_series.emit()
for var_x in wifi_dict:
self.line_series = QtCharts.QLineSeries()
self.line_series.setName(str(var_x))
self.line_series.append(
QPoint(2400 + (wifi_dict[var_x][1] * 5 - 4), -100))
self.line_series.append(
QPoint(2411 + (wifi_dict[var_x][1] * 5 - 9),
int(wifi_dict[var_x][0])))
self.line_series.append(
QPoint(2411 + (wifi_dict[var_x][1] * 5 + 1),
int(wifi_dict[var_x][0])))
self.line_series.append(2422 + (wifi_dict[var_x][1] * 5 - 4), -100)
self.add_wifi_series.emit(self.line_series)
self.set_axis_x_series.emit(self.line_series)
self.set_axis_y_series.emit(self.line_series)
self.loop = QEventLoop()
QTimer.singleShot(50, self.loop.quit)
self.loop.exec_()
@Slot(dict)
def append_data_to_wifi_timeline(self, wifi_dict):
""" DOCSTRING """
self.default_array = [
-100, -100, -100, -100, -100, -100, -100, -100, -100, -100, -100,
-100, -100
]
for var_x in wifi_dict:
self.append_lowest_rssi_to_array(wifi_dict[var_x][1],
wifi_dict[var_x][0])
self.append_wifi_timeline_data.emit(self.default_array)
self.default_tupple = tuple(self.default_array)
self.final_tuple = (datetime.datetime.now().strftime('%H:%M:%S'),
*self.default_tupple)
self.save_wifi_timeline_data.emit(self.final_tuple)
self.loop = QEventLoop()
QTimer.singleShot(50, self.loop.quit)
self.loop.exec_()
def append_lowest_rssi_to_array(self, x, value):
""" DOCSTRING """
for i in self.channels_occ[int(x)]:
if self.default_array[i - 1] < value:
self.default_array[i - 1] = value
def enable_saving_to_db(self, state):
""" DOCSTRING """
if state is True:
self.save_data_to_db = True
else:
self.save_data_to_db = False
def get_current_lang(self, lang):
""" DOCSTRING """
self.current_lang = lang
def _wait_for_execution_finished(self):
loop = QEventLoop()
self.toolbox.project().project_execution_finished.connect(loop.quit)
loop.exec_()
def _execute_forward(self, resources):
"""
Executes the Tool according to the Tool specification.
Before launching the tool script in a separate instance,
prepares the execution environment by creating all necessary directories
and copying input files where needed.
After execution archives the output files.
Args:
resources (list): a list of resources from direct predecessor items
Returns:
True if execution succeeded, False otherwise
"""
if self._tool_specification is None:
self._logger.msg_warning.emit(
f"Tool <b>{self.name}</b> has no Tool specification to execute"
)
return False
execution_dir = _execution_directory(self._work_dir,
self._tool_specification)
if execution_dir is None:
return False
if self._work_dir is not None:
work_or_source = "work"
# Make work directory anchor with path as tooltip
work_anchor = ("<a style='color:#99CCFF;' title='" +
execution_dir + "' href='file:///" + execution_dir +
"'>work directory</a>")
self._logger.msg.emit(
f"*** Copying Tool specification <b>{self._tool_specification.name}"
f"</b> source files to {work_anchor} ***")
if not self._copy_program_files(execution_dir):
self._logger.msg_error.emit(
"Copying program files to base directory failed.")
return False
else:
work_or_source = "source"
# Make source directory anchor with path as tooltip
anchor = (
f"<a style='color:#99CCFF;' title='{execution_dir}'"
f"href='file:///{execution_dir}'>{work_or_source} directory</a>")
self._logger.msg.emit(
f"*** Executing Tool specification <b>{self._tool_specification.name}</b> in {anchor} ***"
)
# Find required input files for ToolInstance (if any)
if self._tool_specification.inputfiles:
self._logger.msg.emit(
"*** Checking Tool specification requirements ***")
n_dirs, n_files = _count_files_and_dirs(
self._tool_specification.inputfiles)
if n_files > 0:
self._logger.msg.emit(
"*** Searching for required input files ***")
file_paths = flatten_file_path_duplicates(
self._find_input_files(resources),
self._logger,
log_duplicates=True)
not_found = [k for k, v in file_paths.items() if v is None]
if not_found:
self._logger.msg_error.emit(
f"Required file(s) <b>{', '.join(not_found)}</b> not found"
)
return False
self._logger.msg.emit(
f"*** Copying input files to {work_or_source} directory ***"
)
# Copy input files to ToolInstance work or source directory
if not self._copy_input_files(file_paths, execution_dir):
self._logger.msg_error.emit(
"Copying input files failed. Tool execution aborted.")
return False
if n_dirs > 0:
self._logger.msg.emit(
f"*** Creating input subdirectories to {work_or_source} directory ***"
)
if not self._create_input_dirs(execution_dir):
# Creating directories failed -> abort
self._logger.msg_error.emit(
"Creating input subdirectories failed. Tool execution aborted."
)
return False
optional_file_copy_paths = dict()
if self._tool_specification.inputfiles_opt:
self._logger.msg.emit("*** Searching for optional input files ***")
optional_file_paths = self._find_optional_input_files(resources)
for k, v in optional_file_paths.items():
self._logger.msg.emit(
f"\tFound <b>{len(v)}</b> files matching pattern <b>{k}</b>"
)
optional_file_copy_paths = self._optional_output_destination_paths(
optional_file_paths, execution_dir)
self._copy_optional_input_files(optional_file_copy_paths)
if not self._create_output_dirs(execution_dir):
self._logger.msg_error.emit(
"Creating output subdirectories failed. Tool execution aborted."
)
return False
input_database_urls = _database_urls_from_resources(resources)
output_database_urls = _database_urls_from_resources(
self._downstream_resources)
self._tool_instance = self._tool_specification.create_tool_instance(
execution_dir)
try:
self._tool_instance.prepare(
list(optional_file_copy_paths.values()), input_database_urls,
output_database_urls, self._cmd_line_args)
except RuntimeError as error:
self._logger.msg_error.emit(
f"Failed to prepare tool instance: {error}")
return False
execution_token = _ExecutionToken(self, execution_dir)
self._tool_instance.instance_finished.connect(
execution_token.handle_execution_finished)
self._logger.msg.emit(
f"*** Starting instance of Tool specification <b>{self._tool_specification.name}</b> ***"
)
# Wait for finished right here
loop = QEventLoop()
self._tool_instance.instance_finished.connect(loop.quit)
self._tool_instance.execute()
if self._tool_instance.is_running():
loop.exec_()
return self._last_return_code == 0
class CFFEXSpider(QObject):
spider_finished = Signal(str, bool)
def __init__(self, *args, **kwargs):
super(CFFEXSpider, self).__init__(*args, **kwargs)
self.date = None
self.event_loop = QEventLoop(self) # 用于网络请求同步事件阻塞
def set_date(self, date):
self.date = datetime.strptime(date, '%Y-%m-%d')
def get_daily_source_file(self):
""" 获取每日行情数据源文件保存至本地 """
if self.date is None:
raise DateValueError("请先使用`set_date`设置`CZCESpider`日期.")
url = "http://www.cffex.com.cn/sj/hqsj/rtj/{}/{}/{}_1.csv".format(
self.date.strftime('%Y%m'), self.date.strftime('%d'),
self.date.strftime('%Y%m%d'))
app = QApplication.instance()
network_manager = getattr(app, "_network")
request = QNetworkRequest(url=url)
request.setHeader(QNetworkRequest.UserAgentHeader,
random.choice(USER_AGENTS))
reply = network_manager.get(request)
reply.finished.connect(self.daily_source_file_reply)
def daily_source_file_reply(self):
""" 获取日统计数据请求返回 """
reply = self.sender()
if reply.error():
reply.deleteLater()
self.spider_finished.emit("失败:" + str(reply.error()), True)
return
save_path = os.path.join(
LOCAL_SPIDER_SRC,
'cffex/daily/{}.csv'.format(self.date.strftime("%Y-%m-%d")))
file_data = reply.readAll()
file_obj = QFile(save_path)
is_open = file_obj.open(QFile.WriteOnly)
if is_open:
file_obj.write(file_data)
file_obj.close()
reply.deleteLater()
self.spider_finished.emit(
"获取中金所{}日交易数据源文件成功!".format(self.date.strftime("%Y-%m-%d")), True)
def get_rank_source_file(self):
""" 获取日排名数据源文件 """
base_url = "http://www.cffex.com.cn/sj/ccpm/{}/{}/{}_1.csv"
app = QApplication.instance()
network_manager = getattr(app, "_network")
for variety in VARIETY_LIST:
url = base_url.format(self.date.strftime("%Y%m"),
self.date.strftime("%d"), variety)
self.spider_finished.emit("准备获取{}的日排名数据文件...".format(variety),
False)
request = QNetworkRequest(url=url)
request.setHeader(QNetworkRequest.UserAgentHeader,
random.choice(USER_AGENTS))
reply = network_manager.get(request)
reply.finished.connect(self.rank_source_file_reply)
time.sleep(1)
self.event_loop.exec_()
def rank_source_file_reply(self):
""" 获取日排名请求返回 """
reply = self.sender()
request_url = reply.request().url().url()
# 解析出请求的品种
request_filename = request_url.rsplit("/", 1)[1]
request_variety = request_filename.split("_")[0]
if reply.error():
reply.deleteLater()
self.spider_finished.emit(
"获取{}排名数据文件。\n失败:{}".format(request_variety[:2],
str(reply.error())), True)
logger.error("获取{}排名数据文件失败了!".format(request_url[:2]))
return
save_path = os.path.join(
LOCAL_SPIDER_SRC,
'cffex/rank/{}_{}.csv'.format(request_variety,
self.date.strftime("%Y-%m-%d")))
file_data = reply.readAll()
file_obj = QFile(save_path)
is_open = file_obj.open(QFile.WriteOnly)
if is_open:
file_obj.write(file_data)
file_obj.close()
reply.deleteLater()
tip = "获取中金所{}_{}日持仓排名数据保存到文件成功!".format(
request_variety, self.date.strftime("%Y-%m-%d"))
if request_variety == "T":
tip = "获取中金所{}日所有品种持仓排名数据保存到文件成功!".format(
self.date.strftime("%Y-%m-%d"))
self.spider_finished.emit(tip, True)
self.event_loop.quit()
def startAnimation(self):
self.startFadeIn()
loop = QEventLoop()
self.animation.finished.connect(loop.quit)
loop.exec_()
QTimer.singleShot(1000, self.startFadeOut)
