class FrameIndicator(QGraphicsItem):
def __init__(self, size, frame_width, offset, y, color=red, parent=None):
super(FrameIndicator, self).__init__(parent)
self._size = size
self._frame_width = frame_width
self.y = y
self.offset = offset
self.view_rect = QRectF()
self.setFrame(0)
self.color = color
def paint(self, painter, styleoptions, parent=None):
brush = QBrush()
brush.setColor(self.color)
painter.setBrush(self.color)
painter.drawRect(self._bounding_rect)
def boundingRect(self):
return self._bounding_rect
def setFrame(self, idx):
self.prepareGeometryChange()
x = idx * self._frame_width + self.offset
self._bounding_rect = QRectF()
self._bounding_rect.setX(x)
self._bounding_rect.setY(self.y)
self._bounding_rect.setSize(self._size)
class TimeLine(QGraphicsItem):
def __init__(self,
label,
indices,
pos,
length,
height,
label_width,
frame_width,
color,
parent=None):
super(TimeLine, self).__init__(parent)
self._pos = pos
self._length = length
self._height = height
self.label = label
self._label_width = label_width
self._indices = indices
self.frame_width = frame_width
size = QSizeF()
size.setHeight(self._height)
size.setWidth(self._length)
self._bounding_rect = QRectF()
self._bounding_rect.setX(self._pos.x())
self._bounding_rect.setY(self._pos.y())
self._bounding_rect.setSize(size)
self._tpos = QPointF(pos)
self._tpos.setY(pos.y() + self._height)
self.color = QColor()
self.color.setRed(color[0] * 255)
self.color.setGreen(color[1] * 255)
self.color.setBlue(color[2] * 255)
self.color.setAlpha(255)
def paint(self, painter, styleoptions, parent=None):
#brush = QtGui.QBrush()
#brush.setColor(blue)
painter.setBrush(self.color)
for idx in self._indices:
x = self._pos.x() + self._label_width + self.frame_width * idx
painter.drawRect(x, self._pos.y(), self.frame_width, self._height)
#brush = QtGui.QBrush()
#brush.setColor(red)
painter.setBrush(black)
painter.drawLine(self._pos.x(), self._pos.y(),
self._pos.x() + self._length, self._pos.y())
painter.setPen(black)
painter.setFont(QFont("Arial", 10))
painter.drawText(self._tpos, self.label) # QtCore.Qt.AlignCenter,
def boundingRect(self):
return self._bounding_rect
class wheel(QWidget):
currentColorChanged = Signal(QColor)
def __init__(self, parent=None):
super(wheel, self).__init__(parent)
self.setFixedSize(256, 256)
# start, end angles for value arc
self.s_ang, self.e_ang = 135, 225
# offset angle and direction for color wheel
self.o_ang, self.rot_d = 45, -1 # 1 for clock-wise, -1 for widdershins
# other initializations
self.pos = QPointF(-100, -100)
self.vIdCen = QPointF(-100, -100)
self.vIdAng = radians(self.s_ang)
self.chPt = self.pos
self.hue = self.sat = self.value = 255
self.setup()
self.pos = self.cWhBox.center()
self._namedColorList = []
self._namedColorPts = []
self._showNames = False
self.setMouseTracking(True)
self.installEventFilter(self)
self._startedTimer = False
## def timerSpinner(self):
## "won't this be fun"
## self.o_ang -= 1; self.o_ang %= 360
## stable = False
##
## colWhl = QConicalGradient(self.cen, self.o_ang)
## whl_cols = [Qt.red, Qt.magenta,
## Qt.blue, Qt.cyan, Qt.green,
## Qt.yellow, Qt.red]
## for i, c in enumerate(whl_cols[::self.rot_d]):
## colWhl.setColorAt(i / 6.0, c)
##
## if stable: # crosshairs stay on color
## t = radians(self.hue + self.o_ang * -self.rot_d) * -self.rot_d
## r = self.sat / 255.0 * self.cW_rad
## x, y = r * cos(t) + self.cen.x(), r * -sin(t) + self.cen.y()
## self.chPt = QPointF(x, y)
## else: # crosshairs stay on point
## t = atan2(self.cen.y() - self.pos.y(), self.pos.x() - self.cen.x())
## h = (int(degrees(t)) - self.o_ang) * -self.rot_d
## self.hue = (h if h > 0 else h + 360) % 360
## col = QColor(); col.setHsv(self.hue, self.sat, self.value)
## self.currentColorChanged.emit(col)
##
## self.cWhlBrush1 = QBrush(colWhl)
## self.update()
def resizeEvent(self, event):
self.setup() # re-construct the sizes
self.setNamedColors(self._namedColorList)
def getColor(self):
col = QColor()
col.setHsv(self.hue, self.sat, self.value)
return col
def setNamedColors(self, colorList):
"sets list [(name, #html)] of named colors"
self._namedColorList = colorList
lst = []
r2 = (self.vAoBox.width() + self.vAiBox.width()) / 4.0
for i in self._namedColorList:
h, s, v, a = QColor(i[1]).getHsv()
t = radians(h + self.o_ang * -self.rot_d) * -self.rot_d
r = s / 255.0 * self.cW_rad
x, y = r * cos(t) + self.cen.x(), r * -sin(t) + self.cen.y()
lst.append(QPointF(x, y))
#t2 = ((v / 255.0) * self.ang_w + radians(self.e_ang) + 2 * pi) % (2 * pi)
#x, y = r2 * cos(t2) + self.cen.x(), r2 * -sin(t2) + self.cen.y()
#lst.append(QPointF(x, y))
self._namedColorPts = lst
def showNamedColors(self, flag=False):
"show/hide location of named colors on color wheel"
self._showNames = flag
self.update()
def setColor(self, color): # saturation -> radius
h, s, v, a = color.getHsv() # hue -> angle
self.hue, self.sat, self.value = h, s, v # value -> side bar thingy
t = radians(h + self.o_ang * -self.rot_d) * -self.rot_d
r = s / 255.0 * self.cW_rad
x, y = r * cos(t) + self.cen.x(), r * -sin(t) + self.cen.y()
self.chPt = QPointF(x, y) # hue, saturation
self.vIdAng = t2 = (v / 255.0) * self.ang_w + radians(self.e_ang)
self.vIdAng = t2 = t2 if t2 > 0 else t2 + 2 * pi
r2 = self.vAoBox.width() / 2.0
x, y = r2 * cos(t2) + self.cen.x(), r2 * -sin(t2) + self.cen.y()
self.vIdCen, self.vIdAng = QPointF(x, y), t2 # value
self.vIdBox.moveCenter(self.vIdCen)
self.update()
def eventFilter(self, source, event):
if (event.type() == QEvent.MouseButtonPress
or (event.type() == QEvent.MouseMove
and event.buttons() == Qt.LeftButton)):
self.pos = pos = event.pos()
t = atan2(self.cen.y() - pos.y(), pos.x() - self.cen.x())
if self.colWhlPath.contains(pos): # in the color wheel
self.chPt = pos
#if not self._startedTimer:
# self.timer = QTimer()
# self.timer.timeout.connect(self.timerSpinner)
# self.timer.start(30.303)
# self._startedTimer = True
# hue -> mouse angle (same as t here)
h = (int(degrees(t)) - self.o_ang) * -self.rot_d
self.hue = (h if h > 0 else h + 360) % 360
# saturation -> mouse radius (clipped to wheel radius)
m_rad = sqrt((self.pos.x() - self.cen.x())**2 +
(self.pos.y() - self.cen.y())**2)
self.sat = int(255 * min(m_rad / self.cW_rad, 1))
if self.vInArcPath.contains(pos): # in the value selection arc
self.vIdAng = t if t > 0 else t + 2 * pi
r2 = self.vAoBox.width() / 2.0
x, y = r2 * cos(t) + self.cen.x(), r2 * -sin(t) + self.cen.y()
self.vIdCen = QPointF(x, y)
self.vIdBox.moveCenter(self.vIdCen)
self.value = int(255 *
(t - radians(self.e_ang)) / self.ang_w) % 256
self.update()
col = QColor()
col.setHsv(self.hue, self.sat, self.value)
self.currentColorChanged.emit(col)
return QWidget.eventFilter(self, source, event)
def paintEvent(self, event):
painter = QPainter(self)
painter.setRenderHint(painter.Antialiasing)
#painter.setBrush(QBrush(Qt.black, Qt.NoBrush))
#painter.drawRect(self.winBox) # border
# value selector indicator
painter.setBrush(QBrush(Qt.black, Qt.SolidPattern))
painter.drawPie(self.vIdBox, 16 * (degrees(self.vIdAng) - 22.5), 720)
# value selector arc
painter.setClipPath(self.vArcPath)
painter.setPen(Qt.NoPen)
arc = QConicalGradient(self.cen, self.e_ang)
color = QColor()
color.setHsv(self.hue, self.sat, 255)
arc.setColorAt(1 - (self.e_ang - self.s_ang) / 360.0, color)
arc.setColorAt(1, Qt.black)
arc.setColorAt(0, Qt.black)
painter.setBrush(arc)
painter.drawPath(self.vArcPath)
painter.setClipPath(self.vArcPath, Qt.NoClip)
# color wheel
painter.setPen(Qt.NoPen)
painter.setBrush(self.cWhlBrush1)
painter.drawEllipse(self.cWhBox)
painter.setBrush(self.cWhlBrush2)
painter.drawEllipse(self.cWhBox)
# crosshairs
painter.setClipPath(self.colWhlPath)
painter.setBrush(QBrush(Qt.black, Qt.SolidPattern))
chVert = QRectF(0, 0, 2, 20)
chHort = QRectF(0, 0, 20, 2)
chVert.moveCenter(self.chPt)
chHort.moveCenter(self.chPt)
painter.drawRect(chVert)
painter.drawRect(chHort)
# named color locations
if self._showNames:
painter.setClipPath(self.vArcPath, Qt.NoClip)
painter.setPen(Qt.SolidLine)
try:
painter.drawPoints(*self._namedColorPts) # PyQt
except:
painter.drawPoints(self._namedColorPts) # PySide
def setup(self):
"sets bounds on value arc and color wheel"
# bounding boxes
self.winBox = QRectF(self.rect())
self.vIoBox = QRectF() # value indicator arc outer
self.vIdBox = QRectF() # value indicator box
self.vAoBox = QRectF() # value arc outer
self.vAiBox = QRectF() # value arc inner
self.cWhBox = QRectF() # color wheel
self.vIdBox.setSize(QSizeF(15, 15))
self.vIoBox.setSize(self.winBox.size())
self.vAoBox.setSize(self.winBox.size() - self.vIdBox.size() / 2.0)
self.vAiBox.setSize(self.vAoBox.size() - QSizeF(20, 20))
self.cWhBox.setSize(self.vAiBox.size() - QSizeF(20, 20))
# center - shifted to the right slightly
x = self.winBox.width() - (self.vIdBox.width() +
self.vAiBox.width()) / 2.0
self.cen = QPointF(x, self.winBox.height() / 2.0)
# positions and initial settings
self.vAoBox.moveCenter(self.cen)
self.vAiBox.moveCenter(self.cen)
self.cWhBox.moveCenter(self.cen)
self.vIdBox.moveCenter(self.vIdCen)
self.cW_rad = self.cWhBox.width() / 2.0
self.ang_w = radians(self.s_ang) - radians(self.e_ang)
# gradients
colWhl = QConicalGradient(self.cen, self.o_ang)
whl_cols = [
Qt.red, Qt.magenta, Qt.blue, Qt.cyan, Qt.green, Qt.yellow, Qt.red
]
for i, c in enumerate(whl_cols[::self.rot_d]):
colWhl.setColorAt(i / 6.0, c)
rad = min(self.cWhBox.width() / 2.0, self.cWhBox.height() / 2.0)
cWhlFade = QRadialGradient(self.cen, rad, self.cen)
cWhlFade.setColorAt(0, Qt.white)
cWhlFade.setColorAt(1, QColor(255, 255, 255, 0))
self.cWhlBrush1 = QBrush(colWhl)
self.cWhlBrush2 = QBrush(cWhlFade)
# painter paths (arcs, wheel)
rad = self.vAoBox.width() / 2.0
x, y = rad * cos(radians(self.s_ang)), -rad * sin(radians(self.s_ang))
x += self.cen.x()
y += self.cen.y()
self.vArcPath = QPainterPath(QPointF(x, y)) # value arc (for color)
self.vArcPath.arcTo(self.vAoBox, self.s_ang, self.e_ang - self.s_ang)
self.vArcPath.arcTo(self.vAiBox, self.e_ang, self.s_ang - self.e_ang)
self.vArcPath.closeSubpath()
self.vInArcPath = QPainterPath(QPointF(x, y)) # value arc (for mouse)
self.vInArcPath.arcTo(self.vIoBox, self.s_ang, self.e_ang - self.s_ang)
self.vInArcPath.arcTo(self.vAiBox, self.e_ang, self.s_ang - self.e_ang)
self.vInArcPath.closeSubpath()
self.colWhlPath = QPainterPath()
self.colWhlPath.addEllipse(self.cWhBox)