def getEntity(self):
activeObject = self.getActiveObject()
activeEntity = Machine.getEntity(self) #run the default code
# read the processing time from the corresponding remainingRoute entry
processingTime = activeEntity.remainingRoute[0].get(
'processingTime', {})
processingTime = self.getOperationTime(processingTime)
self.rng = RandomNumberGenerator(self, processingTime)
self.procTime = self.rng.generateNumber()
# check if there is a need for manual processing
self.checkForManualOperation(type='Processing', entity=activeEntity)
# read the setup time from the corresponding remainingRoute entry
setupTime = activeEntity.remainingRoute[0].get('setupTime', {})
setupTime = self.getOperationTime(setupTime)
self.stpRng = RandomNumberGenerator(self, setupTime)
# check if there is a need for manual processing
self.checkForManualOperation(type='Setup', entity=activeEntity)
activeEntity.currentStep = activeEntity.remainingRoute.pop(
0) #remove data from the remaining route of the entity
if activeEntity.currentStep:
# update the task_id of the currentStep dict within the schedule
try:
activeEntity.schedule[-1][
"task_id"] = activeEntity.currentStep["task_id"]
# if there is currentOperator then update the taskId of corresponding step of their schedule according to the task_id of the currentStep
if self.currentOperator:
self.currentOperator.schedule[-1][
"task_id"] = activeEntity.currentStep["task_id"]
except KeyError:
pass
return activeEntity
def __init__(self, id, name, capacity=1, \
processingTime=None, repairman='None',\
scrapQuantity={},
operatorPool='None',operationType='None',\
setupTime=None, loadTime=None,
canDeliverOnInterruption=False,
**kw):
if not processingTime:
processingTime = {'distributionType': 'Fixed', 'mean': 1}
# initialize using the default method of the object
Machine.__init__(self,id=id,name=name,\
capacity=capacity,\
processingTime=processingTime,
repairman=repairman,
canDeliverOnInterruption=canDeliverOnInterruption,
operatorPool=operatorPool,operationType=operationType,\
setupTime=setupTime, loadTime=loadTime,
)
# set the attributes of the scrap quantity distribution
if not scrapQuantity:
scrapQuantity = {'Fixed': {'mean': 0}}
self.scrapRng = RandomNumberGenerator(self, scrapQuantity)
from Globals import G
G.BatchScrapMachineList.append(self)
def __init__(self,
id,
name,
interArrivalTime=None,
entity='Dream.Part',
**kw):
# Default values
if not interArrivalTime:
interArrivalTime = {'Fixed': {'mean': 1}}
if 'Normal' in interArrivalTime.keys() and\
interArrivalTime['Normal'].get('max', None) is None:
interArrivalTime['Normal']['max'] = interArrivalTime['Normal'][
'mean'] + 5 * interArrivalTime['Normal']['stdev']
CoreObject.__init__(self, id, name)
# properties used for statistics
self.totalinterArrivalTime = 0 # the total interarrival time
self.numberOfArrivals = 0 # the number of entities that were created
self.type = "Source" #String that shows the type of object
self.rng = RandomNumberGenerator(self, interArrivalTime)
self.item = Globals.getClassFromName(
entity) #the type of object that the Source will generate
self.scheduledEntities = [
] # list of creations that are scheduled. pattern is [timeOfCreation, EntityCounter]
from Globals import G
G.SourceList.append(self)
def __init__(self, id="", name="", victim=None, distribution=None, index=0, repairman=None, **kw):
ObjectInterruption.__init__(self, id, name, victim=victim)
self.rngTTF = RandomNumberGenerator(self, distribution.get("TTF", {"Fixed": {"mean": 100}}))
self.rngTTR = RandomNumberGenerator(self, distribution.get("TTR", {"Fixed": {"mean": 10}}))
self.name = "F" + str(index)
self.repairman = repairman # the resource that may be needed to fix the failure
# if now resource is needed this will be "None"
self.type = "PeriodicMaintenance"
def __init__(self, id='',name='',victim=None, distribution=None, index=0, repairman=None,**kw):
ObjectInterruption.__init__(self,id,name,victim=victim)
self.rngTTF=RandomNumberGenerator(self, distribution.get('TTF',{'Fixed':{'mean':100}}))
self.rngTTR=RandomNumberGenerator(self, distribution.get('TTR',{'Fixed':{'mean':10}}))
self.name="F"+str(index)
self.repairman=repairman # the resource that may be needed to fix the failure
# if now resource is needed this will be "None"
self.type="PeriodicMaintenance"
def __init__(self, victim=None, distribution=None, index=0, repairman=None, offshift=False,
deteriorationType='constant',**kw):
#Process.__init__(self)
ObjectInterruption.__init__(self,victim)
if distribution:
self.distType=distribution.get('distributionType','No') # the distribution that the failure duration follows
self.MTTF=distribution.get('MTTF',60) # the MTTF
self.MTTR=distribution.get('MTTR',5) # the MTTR
self.availability=distribution.get('availability',100) # the availability
else:
self.distType='No'
self.MTTF=60
self.MTTR=5
self.availability=100
self.name="F"+str(index)
self.repairman=repairman # the resource that may be needed to fix the failure
# if now resource is needed this will be "None"
self.type="Failure"
self.id=0
# shows how the time to failure is measured
# 'constant' means it counts not matter the state of the victim
# 'onShift' counts only if the victim is onShift
# 'working' counts only working time
self.deteriorationType=deteriorationType
if(self.distType=="Availability"):
# --------------------------------------------------------------
# the following are used if we have availability defined
# (as in plant) the erlang is a special case of Gamma.
# To model the Mu and sigma (that is given in plant)
# as alpha and beta for gamma you should do the following:
# beta=(sigma^2)/Mu
# alpha=Mu/beta
# --------------------------------------------------------------
self.AvailabilityMTTF=self.MTTR*(float(availability)/100)/(1-(float(availability)/100))
self.sigma=0.707106781185547*self.MTTR
self.theta=(pow(self.sigma,2))/float(self.MTTR)
self.beta=self.theta
self.alpha=(float(self.MTTR)/self.theta)
self.rngTTF=RandomNumberGenerator(self, "Exp")
self.rngTTF.avg=self.AvailabilityMTTF
self.rngTTR=RandomNumberGenerator(self, "Erlang")
self.rngTTR.alpha=self.alpha
self.rngTTR.beta=self.beta
else:
# --------------------------------------------------------------
# if the distribution is fixed
# --------------------------------------------------------------
self.rngTTF=RandomNumberGenerator(self, self.distType)
self.rngTTF.mean=self.MTTF
self.rngTTR=RandomNumberGenerator(self, self.distType)
self.rngTTR.mean=self.MTTR
# flag used to identify if the time between failures should be counted while the victim is off-shift
self.offshift=offshift
def __generate_instance(self, seed):
RNG = RandomNumberGenerator(seed)
task_queue = []
for J in range(0, self.size):
task_queue.append({'j': J + 1})
for M in range(1, self.machines + 1):
task_queue[J].update({f'p{M}': RNG.nextInt(1, MAX_VALUE)})
task_queue[J].update({f'S{M}': 0})
task_queue[J].update({f'C{M}': 0})
return task_queue
def calculateProcessingTime(self):
# this is only for processing of the initial wip
if self.isProcessingInitialWIP:
activeEntity=self.getActiveObjectQueue()[0]
if activeEntity.remainingProcessingTime:
remainingProcessingTime=activeEntity.remainingProcessingTime
from RandomNumberGenerator import RandomNumberGenerator
initialWIPrng=RandomNumberGenerator(self, remainingProcessingTime)
return initialWIPrng.generateNumber()
return self.rng.generateNumber() # this is if we have a default processing time for all the entities
def __init__(self, id='',name='',victim=None, distribution={},
endUnfinished=True,offShiftAnticipation=0,**kw):
ObjectInterruption.__init__(self,id,name,victim=victim)
self.rngTTB=RandomNumberGenerator(self, distribution.get('TTB',{'Fixed':{'mean':100}}))
self.rngTTR=RandomNumberGenerator(self, distribution.get('TTR',{'Fixed':{'mean':10}}))
self.type="Break"
# end current wip before going to break
self.endUnfinished=endUnfinished
# if the break is close to end of shift below a limit it will be suspended
self.offShiftAnticipation=offShiftAnticipation
def calculateProcessingTime(self):
# this is only for processing of the initial wip
if self.isProcessingInitialWIP:
activeEntity=self.getActiveObjectQueue()[0]
if activeEntity.remainingProcessingTime:
remainingProcessingTime=activeEntity.remainingProcessingTime
from RandomNumberGenerator import RandomNumberGenerator
initialWIPrng=RandomNumberGenerator(self, remainingProcessingTime)
return initialWIPrng.generateNumber()
return self.rng.generateNumber() # this is if we have a default processing time for all the entities
def instanceGenerator(Z, size):
generator = RandomNumberGenerator(Z)
d = [[0 for i in range(size)] for j in range(size)]
for i in range(size):
for j in range(size):
if (i > j):
d[i][j] = generator.nextInt(1, 50)
d[j][i] = generator.nextInt(1, 50)
return d
def __init__(self,
id,
name,
numberOfSubBatches=1,
processingTime=None,
operator='None',
outputResults=False,
**kw):
CoreObject.__init__(self, id, name)
self.type = "BatchRassembly" #String that shows the type of object
if not processingTime:
processingTime = {'Fixed': {'mean': 0}}
if 'Normal' in processingTime.keys() and\
processingTime['Normal'].get('max', None) is None:
processingTime['Normal']['max'] = float(
processingTime['Normal']['mean']) + 5 * float(
processingTime['Normal']['stdev'])
# holds the capacity of the object
self.numberOfSubBatches = numberOfSubBatches
# sets the operator resource of the Machine
self.operator = operator
# Sets the attributes of the processing (and failure) time(s)
self.rng = RandomNumberGenerator(self, processingTime)
from Globals import G
G.BatchReassemblyList.append(self)
# flag to show if the objects outputs results
self.outputResults = bool(int(outputResults))
def __init__(self,
id,
name,
processingTime=None,
numberOfSubBatches=1,
operator='None',
**kw):
CoreObject.__init__(self, id, name)
self.type = "BatchDecomposition" #String that shows the type of object
if not processingTime:
processingTime = {'Fixed': {'mean': 0}}
if 'Normal' in processingTime.keys() and\
processingTime['Normal'].get('max', None) is None:
processingTime['Normal']['max'] = float(
processingTime['Normal']['mean']) + 5 * float(
processingTime['Normal']['stdev'])
# holds the capacity of the object
self.numberOfSubBatches = int(numberOfSubBatches)
# sets the operator resource of the Machine
self.operator = operator
# Sets the attributes of the processing (and failure) time(s)
self.rng = RandomNumberGenerator(self, processingTime)
from Globals import G
G.BatchDecompositionList.append(self)
def calculateInitialOperationTimes(self):
# read the setup/processing time from the first entry of the full route
activeEntity = self.getActiveObjectQueue()[0]
#if the entity has its route defined in the BOM then remainingProcessing/SetupTime is provided
# XX consider moving setupUPtime update to checkForManualOperationTypes as Setup is performed before Processing
if activeEntity.routeInBOM:
processingTime = self.getOperationTime(
activeEntity.remainingProcessingTime)
setupTime = self.getOperationTime(activeEntity.remainingSetupTime)
else: # other wise these should be read from the route
processingTime = activeEntity.route[0].get('processingTime', {})
processingTime = self.getOperationTime(processingTime)
setupTime = activeEntity.route[0].get('setupTime', {})
setupTime = self.getOperationTime(setupTime)
self.rng = RandomNumberGenerator(self, processingTime)
self.stpRng = RandomNumberGenerator(self, setupTime)
def getEntity(self):
activeObject=self.getActiveObject()
activeEntity=Machine.getEntity(self) #run the default code
# read the processing time from the corresponding remainingRoute entry
processingTime=activeEntity.remainingRoute[0].get('processingTime',{})
processingTime=self.getOperationTime(processingTime)
self.rng=RandomNumberGenerator(self, processingTime)
self.procTime=self.rng.generateNumber()
# check if there is a need for manual processing
self.checkForManualOperation(type='Processing',entity=activeEntity)
# read the setup time from the corresponding remainingRoute entry
setupTime=activeEntity.remainingRoute[0].get('setupTime',{})
setupTime=self.getOperationTime(setupTime)
self.stpRng=RandomNumberGenerator(self, setupTime)
# check if there is a need for manual processing
self.checkForManualOperation(type='Setup',entity=activeEntity)
activeEntity.currentStep = activeEntity.remainingRoute.pop(0) #remove data from the remaining route of the entity
if activeEntity.currentStep:
# update the task_id of the currentStep dict within the schedule
try:
activeEntity.schedule[-1]["task_id"] = activeEntity.currentStep["task_id"]
# if there is currentOperator then update the taskId of corresponding step of their schedule according to the task_id of the currentStep
if self.currentOperator:
self.currentOperator.schedule[-1]["task_id"] = activeEntity.currentStep["task_id"]
except KeyError:
pass
return activeEntity
def __init__(self, id, name, capacity=1, \
processingTime=None, repairman='None',\
scrapQuantity={},
operatorPool='None',operationType='None',\
setupTime=None, loadTime=None,
canDeliverOnInterruption=False,
technology=None,
**kw):
if not processingTime:
processingTime = {'distributionType': 'Fixed',
'mean': 1}
# initialize using the default method of the object
Machine.__init__(self,id=id,name=name,\
capacity=capacity,\
processingTime=processingTime,
repairman=repairman,
canDeliverOnInterruption=canDeliverOnInterruption,
operatorPool=operatorPool,operationType=operationType,\
setupTime=setupTime, loadTime=loadTime,
technology=technology
)
# set the attributes of the scrap quantity distribution
if not scrapQuantity:
scrapQuantity = {'Fixed':{'mean': 0}}
self.scrapRng=RandomNumberGenerator(self, scrapQuantity)
from Globals import G
G.BatchScrapMachineList.append(self)
class Main:
generator = RandomNumberGenerator()
observer1 = DigitObserver()
observer2 = GraphObserver()
generator.addObserver(observer1)
generator.addObserver(observer2)
generator.execute()
def __init__(self, victim=None, distribution=None, index=0, repairman=None):
#Process.__init__(self)
ObjectInterruption.__init__(self,victim)
if distribution:
self.distType=distribution.get('distributionType','No') # the distribution that the failure duration follows
self.MTTF=distribution.get('MTTF',60) # the MTTF
self.MTTR=distribution.get('MTTR',5) # the MTTR
self.availability=distribution.get('availability',100) # the availability
else:
self.distType='No'
self.MTTF=60
self.MTTR=5
self.availability=100
self.name="F"+str(index)
self.repairman=repairman # the resource that may be needed to fix the failure
# if now resource is needed this will be "None"
self.type="Failure"
self.id=0
if(self.distType=="Availability"):
# --------------------------------------------------------------
# the following are used if we have availability defined
# (as in plant) the erlang is a special case of Gamma.
# To model the Mu and sigma (that is given in plant)
# as alpha and beta for gamma you should do the following:
# beta=(sigma^2)/Mu
# alpha=Mu/beta
# --------------------------------------------------------------
self.AvailabilityMTTF=self.MTTR*(float(availability)/100)/(1-(float(availability)/100))
self.sigma=0.707106781185547*self.MTTR
self.theta=(pow(self.sigma,2))/float(self.MTTR)
self.beta=self.theta
self.alpha=(float(self.MTTR)/self.theta)
self.rngTTF=RandomNumberGenerator(self, "Exp")
self.rngTTF.avg=self.AvailabilityMTTF
self.rngTTR=RandomNumberGenerator(self, "Erlang")
self.rngTTR.alpha=self.alpha
self.rngTTR.beta=self.beta
else:
# --------------------------------------------------------------
# if the distribution is fixed
# --------------------------------------------------------------
self.rngTTF=RandomNumberGenerator(self, self.distType)
self.rngTTF.mean=self.MTTF
self.rngTTR=RandomNumberGenerator(self, self.distType)
self.rngTTR.mean=self.MTTR
def getEntity(self):
activeObject=self.getActiveObject()
activeEntity=Machine.getEntity(self) #run the default code
# read the processing time from the corresponding remainingRoute entry
processingTime=activeEntity.remainingRoute[0].get('processingTime',{})
processingTime=self.getOperationTime(processingTime)
self.rng=RandomNumberGenerator(self, processingTime)
self.procTime=self.rng.generateNumber()
# check if there is a need for manual processing
self.checkForManualOperation(type='Processing',entity=activeEntity)
# read the setup time from the corresponding remainingRoute entry
setupTime=activeEntity.remainingRoute[0].get('setupTime',{})
setupTime=self.getOperationTime(setupTime)
self.stpRng=RandomNumberGenerator(self, setupTime)
# check if there is a need for manual processing
self.checkForManualOperation(type='Setup',entity=activeEntity)
removedStep = activeEntity.remainingRoute.pop(0) #remove data from the remaining route of the entity
return activeEntity
def readLoadTime(self,callerObject=None):
assert callerObject!=None, 'the caller of readLoadTime cannot be None'
thecaller=callerObject
thecaller.sortEntities()
activeEntity=thecaller.Res.users[0]
# read the load time from the corresponding remainingRoute entry
loadTime=activeEntity.remainingRoute[0].get('loadTime',{})
loadTime=self.getOperationTime(loadTime)
self.loadRng=RandomNumberGenerator(self, loadTime)
def main():
seed = int(input("Wprowadź Z: "))
generator = RandomNumberGenerator(seed)
taskNumber = int(input("Wprowadź rozmiar problemu: "))
tasks = range(1, taskNumber + 1)
nr = []
pj = [] #czas wykonania
wj = [] #waga/współczynnik kary
dj = [] #żądany termin zakończenia
for task in tasks:
nr.append(task)
pj.append(generator.nextInt(1, 29))
A = 0
for number in pj:
A += number
for task in tasks:
wj.append(generator.nextInt(1, 9))
X = 29
#X=A
for task in tasks:
dj.append(generator.nextInt(1, X))
print("\nnr:", nr)
print("pj: ", pj)
print("wj ", wj)
print("dj", dj)
witi_start = target_fun(pj, wj, dj, taskNumber)
print(f'\nWiTi dla początkowego = {witi_start[0]}')
print(f'C: {witi_start[2]}')
print(f'T: {witi_start[1]}')
witi_greedy = greedy(pj, wj, dj, taskNumber)
print(f'\nWiTi dla Greedy algorithm = {witi_greedy[0]}')
print(f'C: {witi_greedy[2]}')
print(f'T: {witi_greedy[1]}')
witi_brute_force = brute_force(pj, wj, dj, taskNumber)
print(f'\nWiTi dla Brute Force = {witi_brute_force[0]}')
print(f'C: {witi_brute_force[2]}')
print(f'T: {witi_brute_force[1]}')
def main():
seed = int(input("Wprowadź Z: "))
generator = RandomNumberGenerator(seed)
taskNumber = int(input("Wprowadź liczbę zadań: "))
tasks = range(1, taskNumber + 1)
machineNumber = int(input("Wprowadź liczbę maszyn: "))
machines = range(1, machineNumber + 1)
#lista wszystkich zadan na konkretnych maszynach
p_ij = []
# permutacja zadan
pi = []
# wyswietlenie rozwiazania po wykonaniu algorytmu optymalizacji
solution = []
#lista zadan przydzielonych do jednej maszyny
pj = []
for task in tasks:
for machine in machines:
pj.append(generator.nextInt(1, 29))
p_ij.append(pj.copy())
pj.clear()
pi.append(task)
print(p_ij)
print("Permutacj naturalna: ")
print("pi: ", pi)
Cj, Cmax = calculate(p_ij, taskNumber, machineNumber)
print("C:", Cj)
print("Cmax:", Cmax)
for task in tasks:
solution.append([pi[task - 1], p_ij[task - 1]])
pi = Johnson(tasks, p_ij.copy())
print("Johnson: ")
print("pi: ", pi)
sort = {x: i for i, x in enumerate(pi)}
solution.sort(key=lambda x: sort[x[0]])
Cj, Cmax = calculate([row[1] for row in solution], taskNumber,
machineNumber)
print("C", Cj)
print("Cmax:", Cmax)
class BatchScrapMachine(Machine):
# =======================================================================
# constructor run every time a new instance is created
# calls the Machine constructor, but also reads attributes for
# scraping distribution
# =======================================================================
def __init__(self, id, name, capacity=1, \
processingTime=None, repairman='None',\
scrapQuantity={}, **kw):
if not processingTime:
processingTime = {'distributionType': 'Fixed',
'mean': 1}
# initialize using the default method of the object
Machine.__init__(self,id=id,name=name,\
capacity=capacity,\
processingTime=processingTime,
repairman=repairman)
# set the attributes of the scrap quantity distribution
if not scrapQuantity:
scrapQuantity = {'distributionType': 'Fixed',
'mean': 0}
self.scrapRng=RandomNumberGenerator(self, **scrapQuantity)
from Globals import G
G.BatchScrapMachineList.append(self)
# =======================================================================
# removes an Entity from the Object the Entity to be removed is passed
# as argument by getEntity of the receiver
# extends the default behaviour so that
# it can scrap a number of units before disposing the Batch/SubBatch
# =======================================================================
def removeEntity(self, entity=None):
activeEntity = Machine.removeEntity(self, entity)
scrapQuantity=self.scrapRng.generateNumber()
activeEntity.numberOfUnits-=int(scrapQuantity) # the scrapQuantity should be integer at whatever case
if activeEntity.numberOfUnits<0:
activeEntity.numberOfUnits==0
return activeEntity
# =======================================================================
# calculates the processing time
# extends the default behaviour so that
# the per-unit processing time is multiplied with the number of units
# =======================================================================
def calculateProcessingTime(self):
activeEntity = self.getActiveObjectQueue()[0]
# this is only for processing of the initial wip
if self.isProcessingInitialWIP:
if activeEntity.unitsToProcess:
return self.rng.generateNumber()*activeEntity.unitsToProcess
return self.rng.generateNumber()*activeEntity.numberOfUnits
def __init__(self, id='',name='',victim=None, distribution={}, index=0, repairman=None, offshift=False,
deteriorationType='constant',
waitOnTie=False,**kw):
ObjectInterruption.__init__(self,id,name,victim=victim)
self.rngTTF=RandomNumberGenerator(self, distribution.get('TTF',{'Fixed':{'mean':100}}))
self.rngTTR=RandomNumberGenerator(self, distribution.get('TTR',{'Fixed':{'mean':10}}))
self.name="F"+str(index)
self.repairman=repairman # the resource that may be needed to fix the failure
# if now resource is needed this will be "None"
self.type="Failure"
# shows how the time to failure is measured
# 'constant' means it counts not matter the state of the victim
# 'onShift' counts only if the victim is onShift
# 'working' counts only working time
self.deteriorationType=deteriorationType
# flag used to identify if the time between failures should be counted while the victim is off-shift
self.offshift=offshift
# flag to show if the failure will wait on tie with other events before interrupting the victim
self.waitOnTie=waitOnTie
def defineScrapQuantities():
process = G.CMSDData.getElementsByTagName('Process')
#loop through the processes
for proc in process:
try:
#read the scrap quantity
Property = proc.getElementsByTagName('Property')
for prop in Property:
name = prop.getElementsByTagName('Name')
name = name[0].toxml().replace('<Name>',
'').replace('</Name>', '')
if name == 'ScrapQuantity':
scrap = Property[0].getElementsByTagName('Distribution')
scrapName = scrap[0].getElementsByTagName('Name')
scrapName = scrapName[0].toxml().replace('<Name>',
'').replace(
'</Name>', '')
distrParA = scrap[0].getElementsByTagName(
'DistributionParameterA')
parAName = distrParA[0].getElementsByTagName('Name')
parAName = parAName[0].toxml().replace('<Name>',
'').replace(
'</Name>', '')
parAValue = distrParA[0].getElementsByTagName('Value')
parAValue = parAValue[0].toxml().replace(
'<Value>', '').replace('</Value>', '')
else:
continue
#read the id of the station resource
ResourcesRequired = proc.getElementsByTagName(
'ResourcesRequired')
for res in ResourcesRequired:
Resource = res.getElementsByTagName('Resource')
ResourceIdentifier = Resource[0].getElementsByTagName(
'ResourceIdentifier')
ResourceIdentifier = ResourceIdentifier[0].toxml().replace(
'<ResourceIdentifier>',
'').replace('</ResourceIdentifier>', '')
#loop through the stations and for the one with the id set the scrap
distributionDict = {
str(scrapName): {
str(parAName): parAValue
}
}
for obj in G.ObjList:
if obj.id == ResourceIdentifier:
obj.rng = RandomNumberGenerator(obj, distributionDict)
except IndexError:
continue
def __init__(self, size, seed):
self.size = size
self.last_permutation = []
RNG = RandomNumberGenerator(seed)
p_list = []
w_list = []
d_list = []
p_sum = 0
self.queue = []
for J in range(0, self.size):
p_list.append(RNG.nextInt(1, MAX_VALUE))
p_sum += p_list[-1]
for J in range(0, self.size):
w_list.append(RNG.nextInt(1, 9))
for J in range(0, self.size):
d_list.append(RNG.nextInt(1, MAX_D))
for J in range(0, self.size):
self.queue.append(task(J + 1, p_list[J], w_list[J], d_list[J]))
self.last_permutation.append(J + 1)
def __init__(self,
id='',
name='',
victim=None,
distribution={},
endUnfinished=True,
offShiftAnticipation=0,
**kw):
ObjectInterruption.__init__(self, id, name, victim=victim)
self.rngTTB = RandomNumberGenerator(
self, distribution.get('TTB', {'Fixed': {
'mean': 100
}}))
self.rngTTR = RandomNumberGenerator(
self, distribution.get('TTR', {'Fixed': {
'mean': 10
}}))
self.type = "Break"
# end current wip before going to break
self.endUnfinished = endUnfinished
# if the break is close to end of shift below a limit it will be suspended
self.offShiftAnticipation = offShiftAnticipation
def defineProcessingTimes():
process = G.CMSDData.getElementsByTagName('Process')
#loop through the processes
for proc in process:
try:
#read the mean processing time a the unit
OperationTime = proc.getElementsByTagName('OperationTime')
distr = OperationTime[0].getElementsByTagName('Distribution')
distrName = distr[0].getElementsByTagName('Name')
distrName = distrName[0].toxml().replace('<Name>', '').replace(
'</Name>', '')
distrParA = distr[0].getElementsByTagName('DistributionParameterA')
parAName = distrParA[0].getElementsByTagName('Name')
parAName = parAName[0].toxml().replace('<Name>',
'').replace('</Name>', '')
parAValue = distrParA[0].getElementsByTagName('Value')
parAValue = parAValue[0].toxml().replace('<Value>', '').replace(
'</Value>', '')
distrParB = distr[0].getElementsByTagName('DistributionParameterB')
parBName = distrParB[0].getElementsByTagName('Name')
parBName = parBName[0].toxml().replace('<Name>',
'').replace('</Name>', '')
parBValue = distrParB[0].getElementsByTagName('Value')
parBValue = parBValue[0].toxml().replace('<Value>', '').replace(
'</Value>', '')
#read the id of the station resource
ResourcesRequired = proc.getElementsByTagName('ResourcesRequired')
for res in ResourcesRequired:
Resource = res.getElementsByTagName('Resource')
ResourceIdentifier = Resource[0].getElementsByTagName(
'ResourceIdentifier')
ResourceIdentifier = ResourceIdentifier[0].toxml().replace(
'<ResourceIdentifier>',
'').replace('</ResourceIdentifier>', '')
#loop through the stations and for the one with the id set the processing time
distributionDict = {
str(distrName): {
str(parAName): parAValue,
str(parBName): parBValue
}
}
for obj in G.ObjList:
if obj.id == ResourceIdentifier:
obj.rng = RandomNumberGenerator(obj, distributionDict)
except IndexError:
continue
def calculateProcessingTime(self):
# this is only for processing of the initial wip
if self.isProcessingInitialWIP:
# read the processing/setup/load times from the first entry of the full route
activeEntity=self.getActiveObjectQueue()[0]
processingTime=activeEntity.route[0].get('processingTime',{})
processingTime=self.getProcessingTime(processingTime)
self.rng=RandomNumberGenerator(self, **processingTime)
self.procTime=self.rng.generateNumber()
setupTime=activeEntity.route[0].get('setupTime',{})
setupTime=self.getSetupTime(setupTime)
self.stpRng=RandomNumberGenerator(self, **setupTime)
return self.procTime #this is the processing time for this unique entity
def simulatedAnnealing(tasks):
RNG = RandomNumberGenerator(123)
t = copy.deepcopy(tasks)
T = 1550.0 #temperatura zarzenia na bialo rozgrzanej stali :)
Tend = 1E-10 # cokolwiek większe od zera
it = 0
L = 10
pi = []
pi_new = []
pi_best = []
#natural perm
for perm in range(1, t.size + 1):
pi.append(perm)
pi_best.append(perm)
while T > Tend:
for k in range(L):
i = RNG.nextInt(0, t.size) - 1
j = RNG.nextInt(0, t.size) - 1
pi_new = copy.deepcopy(pi)
swap_value = pi_new[i]
pi_new[i] = pi_new[j]
pi_new[j] = swap_value
cmax_new = t.calculate_Cmax(pi_new)
cmax_old = t.calculate_Cmax(pi)
if cmax_new > cmax_old:
r = RNG.nextFloat(0, 1)
dCmax = cmax_old - cmax_new
if r >= math.exp(dCmax / T):
pi_new = copy.deepcopy(pi)
pi = copy.deepcopy(pi_new)
if t.calculate_Cmax(pi_best) > t.calculate_Cmax(pi):
pi_best = copy.deepcopy(pi)
it += 1
T = T / math.log(it + 1) #ln(it+1)
return pi_best
def calculateInitialOperationTimes(self):
# read the setup/processing time from the first entry of the full route
activeEntity=self.getActiveObjectQueue()[0]
#if the entity has its route defined in the BOM then remainingProcessing/SetupTime is provided
# XX consider moving setupUPtime update to checkForManualOperationTypes as Setup is performed before Processing
if activeEntity.routeInBOM:
processingTime=self.getOperationTime(activeEntity.remainingProcessingTime)
setupTime=self.getOperationTime(activeEntity.remainingSetupTime)
else: # other wise these should be read from the route
processingTime=activeEntity.route[0].get('processingTime',{})
processingTime=self.getOperationTime(processingTime)
setupTime=activeEntity.route[0].get('setupTime',{})
setupTime=self.getOperationTime(setupTime)
self.rng=RandomNumberGenerator(self, processingTime)
self.stpRng=RandomNumberGenerator(self, setupTime)
def getEntity(self):
activeObject=self.getActiveObject()
activeEntity=Machine.getEntity(self) #run the default code
# read the processing/setup/load times from the corresponding remainingRoute entry
processingTime=activeEntity.remainingRoute[0].get('processingTime',{})
processingTime=self.getProcessingTime(processingTime)
self.rng=RandomNumberGenerator(self, **processingTime)
self.procTime=self.rng.generateNumber()
setupTime=activeEntity.remainingRoute[0].get('setupTime',{})
setupTime=self.getSetupTime(setupTime)
self.stpRng=RandomNumberGenerator(self, **setupTime)
removedStep = activeEntity.remainingRoute.pop(0) #remove data from the remaining route of the entity
return activeEntity
def __init__(self, id, name, capacity=1, \
processingTime=None, repairman='None',\
scrapQuantity={}, **kw):
if not processingTime:
processingTime = {'distributionType': 'Fixed',
'mean': 1}
# initialize using the default method of the object
Machine.__init__(self,id=id,name=name,\
capacity=capacity,\
processingTime=processingTime,
repairman=repairman)
# set the attributes of the scrap quantity distribution
if not scrapQuantity:
scrapQuantity = {'distributionType': 'Fixed',
'mean': 0}
self.scrapRng=RandomNumberGenerator(self, **scrapQuantity)
from Globals import G
G.BatchScrapMachineList.append(self)
def __init__(self, id, name, interArrivalTime=None, entity='Dream.Part',**kw):
# Default values
if not interArrivalTime:
interArrivalTime = {'Fixed': {'mean': 1}}
if 'Normal' in interArrivalTime.keys() and\
interArrivalTime['Normal'].get('max', None) is None:
interArrivalTime['Normal']['max'] = interArrivalTime['Normal']['mean'] + 5 * interArrivalTime['Normal']['stdev']
CoreObject.__init__(self, id, name)
# properties used for statistics
self.totalinterArrivalTime = 0 # the total interarrival time
self.numberOfArrivals = 0 # the number of entities that were created
self.type="Source" #String that shows the type of object
self.rng = RandomNumberGenerator(self, interArrivalTime)
self.item=Globals.getClassFromName(entity) #the type of object that the Source will generate
self.scheduledEntities=[] # list of creations that are scheduled. pattern is [timeOfCreation, EntityCounter]
from Globals import G
G.SourceList.append(self)
def __init__(self,
id='',
name='',
processingTime=None,
inputsDict=None,
**kw):
self.type = "Assembly" #String that shows the type of object
self.next = [] #list with the next objects in the flow
self.previous = [] #list with the previous objects in the flow
self.previousPart = [] #list with the previous objects that send parts
self.previousFrame = [
] #list with the previous objects that send frames
self.nextIds = [] #list with the ids of the next objects in the flow
self.previousIds = [
] #list with the ids of the previous objects in the flow
#lists to hold statistics of multiple runs
self.Waiting = []
self.Working = []
self.Blockage = []
if not processingTime:
processingTime = {'Fixed': {'mean': 0}}
if 'Normal' in processingTime.keys() and\
processingTime['Normal'].get('max', None) is None:
processingTime['Normal']['max'] = float(
processingTime['Normal']['mean']) + 5 * float(
processingTime['Normal']['stdev'])
CoreObject.__init__(self, id, name)
self.rng = RandomNumberGenerator(self, processingTime)
# ============================== variable that is used for the loading of machines =============
self.exitAssignedToReceiver = False # by default the objects are not blocked
# when the entities have to be loaded to operatedMachines
# then the giverObjects have to be blocked for the time
# that the machine is being loaded
from Globals import G
G.AssemblyList.append(self)
def __init__(self, id, name, interarrivalTime=None, entity='Dream.Part'):
# Default values
if not interarrivalTime:
interarrivalTime = {'distributionType': 'Fixed', 'mean': 1}
if interarrivalTime['distributionType'] == 'Normal' and\
interarrivalTime.get('max', None) is None:
interarrivalTime['max'] = interarrivalTime['mean'] + 5 * interarrivalTime['stdev']
CoreObject.__init__(self, id, name)
# properties used for statistics
self.totalInterArrivalTime = 0 # the total interarrival time
self.numberOfArrivals = 0 # the number of entities that were created
# # list containing objects that follow in the routing
# self.next=[] # list with the next objects in the flow
# self.nextIds=[] # list with the ids of the next objects in the flow
# self.previousIds=[] # list with the ids of the previous objects in the flow.
# # For the source it is always empty!
self.type="Source" #String that shows the type of object
self.rng = RandomNumberGenerator(self, **interarrivalTime)
self.item=Globals.getClassFromName(entity) #the type of object that the Source will generate
def parseInputs(self, inputsDict):
CoreObject.parseInputs(self, inputsDict)
processingTime = inputsDict.get('processingTime', {})
if not processingTime:
processingTime = {
'distributionType': 'Fixed',
'mean': 0,
'stdev': 0,
'min': 0,
}
if processingTime['distributionType'] == 'Normal' and\
processingTime.get('max', None) is None:
processingTime['max'] = float(
processingTime['mean']) + 5 * float(processingTime['stdev'])
self.rng = RandomNumberGenerator(self, **processingTime)
# ============================== variable that is used for the loading of machines =============
self.exitAssignedToReceiver = False # by default the objects are not blocked
# when the entities have to be loaded to operatedMachines
# then the giverObjects have to be blocked for the time
# that the machine is being loaded
from Globals import G
G.AssemblyList.append(self)
class Break(ObjectInterruption):
def __init__(self,
id='',
name='',
victim=None,
distribution={},
endUnfinished=True,
offShiftAnticipation=0,
**kw):
ObjectInterruption.__init__(self, id, name, victim=victim)
self.rngTTB = RandomNumberGenerator(
self, distribution.get('TTB', {'Fixed': {
'mean': 100
}}))
self.rngTTR = RandomNumberGenerator(
self, distribution.get('TTR', {'Fixed': {
'mean': 10
}}))
self.type = "Break"
# end current wip before going to break
self.endUnfinished = endUnfinished
# if the break is close to end of shift below a limit it will be suspended
self.offShiftAnticipation = offShiftAnticipation
def initialize(self):
ObjectInterruption.initialize(self)
self.victimStartsProcess = self.env.event()
self.victimEndsProcess = self.env.event()
# =======================================================================
# The run method for the break which has to served by a repairman
# =======================================================================
def run(self):
from CoreObject import CoreObject
from ObjectResource import ObjectResource
while 1:
# if the victim is off-shift wait for the victim to become on-shift
if not self.victim.onShift:
self.isWaitingForVictimOnShift = True
self.expectedSignals['victimOnShift'] = 1
yield self.victimOnShift
self.victimOnShift = self.env.event()
timeToBreak = self.rngTTB.generateNumber()
remainingTimeToBreak = timeToBreak
self.expectedSignals['victimOffShift'] = 1
self.isWaitingForVictimOffShift = True
# wait for the break or the end off shift of the victim
receivedEvent = yield self.env.any_of(
[self.env.timeout(remainingTimeToBreak), self.victimOffShift])
# if the victim became off shift the loop should start again (to wait on-shift etc)
if self.victimOffShift in receivedEvent:
transmitter, eventTime = self.victimOffShift.value
assert eventTime == self.env.now, 'victimOffShift was triggered earlier, not now'
# reset the signalparam of the victimOffShift event
self.victimOffShift = self.env.event()
continue
# check if we are close to the end of the shift. If yes then the break may be suspended
# (depending on offShiftAnticipation)
timeToNextOfShift = None
for oi in self.victim.objectInterruptions:
if oi.type == 'ShiftScheduler':
if oi.remainingShiftPattern:
timeToNextOfShift = oi.remainingShiftPattern[0][1]
if timeToNextOfShift:
if self.offShiftAnticipation >= timeToNextOfShift - self.env.now:
continue
# interrupt the victim
# if the victim is station
if issubclass(self.victim.__class__, CoreObject):
# if the mode is to end current work before going to break and there is current work,
# wait for victimEndedLastProcessing or victimFailed
# signal before going into break
if self.endUnfinished and self.victim.isProcessing:
self.victim.isWorkingOnTheLast = True
self.waitingSignal = True
self.expectedSignals['endedLastProcessing'] = 1
self.expectedSignals['victimFailed'] = 1
receivedEvent = yield self.env.any_of(
[self.victim.endedLastProcessing, self.victimFailed])
if self.victim.endedLastProcessing in receivedEvent:
transmitter, eventTime = self.victim.endedLastProcessing.value
self.victim.endedLastProcessing = self.env.event()
elif self.victimFailed in receivedEvent:
transmitter, eventTime = self.victimFailed.value
self.victimFailed = self.env.event()
self.interruptVictim()
# if the victim is operator
elif issubclass(self.victim.__class__, ObjectResource):
# if the operator is working in a station and the mode is
# to stop current work in the end of shift
# signal to the station that the operator has to leave
station = self.victim.workingStation
if station:
if not self.endUnfinished and station.expectedSignals[
'processOperatorUnavailable']:
self.sendSignal(
receiver=station,
signal=station.processOperatorUnavailable)
if self.victim.schedule:
if not self.victim.schedule[-1].get("exitTime", None):
self.victim.schedule[-1]["exitTime"] = self.env.now
self.victim.schedule.append({
"station": {
'id': 'on-break'
},
"entranceTime": self.env.now
})
self.requestAllocation()
self.victim.timeLastBreakStarted = self.env.now
self.victim.onBreak = True # get the victim on break
self.outputTrace(self.victim.name, "starts break")
# update the break time
breakTime = self.env.now
self.expectedSignals['victimOffShift'] = 1
self.isWaitingForVictimOffShift = True
# wait for the break or the end off shift of the victim
receivedEvent = yield self.env.any_of([
self.env.timeout(self.rngTTR.generateNumber()),
self.victimOffShift
])
# if the victim became off shift the break is considered over and
# the loop should start again (to wait on-shift etc)
if self.victimOffShift in receivedEvent:
transmitter, eventTime = self.victimOffShift.value
assert eventTime == self.env.now, 'victimOffShift was triggered earlier, not now'
# reset the signalparam of the victimOffShift event
self.victimOffShift = self.env.event()
self.outputTrace(self.victim.name,
"went off-shift so not on break anymore")
else:
self.outputTrace(self.victim.name, "returns from break")
if issubclass(self.victim.__class__, CoreObject):
self.reactivateVictim(
) # re-activate the victim in case it was interrupted
else:
if self.victim.schedule:
if not self.victim.schedule[-1].get("exitTime", None):
self.victim.schedule[-1]["exitTime"] = self.env.now
self.requestAllocation()
self.victim.timeLastBreakEnded = self.env.now
self.victim.totalBreakTime += self.env.now - breakTime
self.victim.onBreak = False # get the victim on break
class PeriodicMaintenance(ObjectInterruption):
def __init__(self, id="", name="", victim=None, distribution=None, index=0, repairman=None, **kw):
ObjectInterruption.__init__(self, id, name, victim=victim)
self.rngTTF = RandomNumberGenerator(self, distribution.get("TTF", {"Fixed": {"mean": 100}}))
self.rngTTR = RandomNumberGenerator(self, distribution.get("TTR", {"Fixed": {"mean": 10}}))
self.name = "F" + str(index)
self.repairman = repairman # the resource that may be needed to fix the failure
# if now resource is needed this will be "None"
self.type = "PeriodicMaintenance"
def initialize(self):
ObjectInterruption.initialize(self)
self.victimStartsProcess = self.env.event()
self.victimEndsProcess = self.env.event()
# =======================================================================
# The run method for the failure which has to served by a repairman
# =======================================================================
def run(self):
while 1:
# if the time that the victim is off-shift should not be counted
timeToFailure = self.rngTTF.generateNumber()
remainingTimeToFailure = timeToFailure
failureNotTriggered = True
yield self.env.timeout(remainingTimeToFailure)
if self.victim.isProcessing:
self.victim.isWorkingOnTheLast = True
self.waitingSignal = True
self.expectedSignals["endedLastProcessing"] = 1
self.expectedSignals["victimFailed"] = 1
receivedEvent = yield self.env.any_of([self.victim.endedLastProcessing, self.victimFailed])
if self.victim.endedLastProcessing in receivedEvent:
transmitter, eventTime = self.victim.endedLastProcessing.value
self.victim.endedLastProcessing = self.env.event()
elif self.victimFailed in receivedEvent:
transmitter, eventTime = self.victimFailed.value
self.victimFailed = self.env.event()
# interrupt the victim
self.interruptVictim() # interrupt the victim
# check in the ObjectInterruptions of the victim. If there is a one that is waiting for victimFailed send it
for oi in self.victim.objectInterruptions:
if oi.expectedSignals["victimFailed"]:
self.sendSignal(receiver=oi, signal=oi.victimFailed)
self.victim.Up = False
self.victim.timeLastFailure = self.env.now
self.outputTrace(self.victim.name, "is down")
# update the failure time
failTime = self.env.now
if self.repairman and self.repairman != "None": # if the failure needs a resource to be fixed,
# the machine waits until the
# resource is available
with self.repairman.getResource().request() as request:
yield request
# update the time that the repair started
timeOperationStarted = self.env.now
self.repairman.timeLastOperationStarted = self.env.now
yield self.env.timeout(self.rngTTR.generateNumber()) # wait until the repairing process is over
self.victim.totalFailureTime += self.env.now - failTime
self.reactivateVictim() # since repairing is over, the Machine is reactivated
self.victim.Up = True
self.outputTrace(self.victim.name, "is up")
self.repairman.totalWorkingTime += self.env.now - timeOperationStarted
continue
yield self.env.timeout(self.rngTTR.generateNumber()) # wait until the repairing process is over
# add the failure
# if victim is off shift add only the fail time before the shift ended
if not self.victim.onShift and failTime < self.victim.timeLastShiftEnded:
self.victim.totalFailureTime += self.victim.timeLastShiftEnded - failTime
# if the victim was off shift since the start of the failure add nothing
elif not self.victim.onShift and failTime >= self.victim.timeLastShiftEnded:
pass
# if victim was off shift in the start of the fail time, add on
elif self.victim.onShift and failTime < self.victim.timeLastShiftStarted:
self.victim.totalFailureTime += self.env.now - self.victim.timeLastShiftStarted
# this can happen only if deteriorationType is constant
assert (
self.deteriorationType == "constant"
), "object got failure while off-shift and deterioration type not constant"
else:
self.victim.totalFailureTime += self.env.now - failTime
self.reactivateVictim() # since repairing is over, the Machine is reactivated
self.victim.Up = True
self.outputTrace(self.victim.name, "is up")
class Source(CoreObject):
def __init__(self, id, name, interarrivalTime=None, entity='Dream.Part'):
# Default values
if not interarrivalTime:
interarrivalTime = {'distributionType': 'Fixed', 'mean': 1}
if interarrivalTime['distributionType'] == 'Normal' and\
interarrivalTime.get('max', None) is None:
interarrivalTime['max'] = interarrivalTime['mean'] + 5 * interarrivalTime['stdev']
CoreObject.__init__(self, id, name)
# properties used for statistics
self.totalInterArrivalTime = 0 # the total interarrival time
self.numberOfArrivals = 0 # the number of entities that were created
# # list containing objects that follow in the routing
# self.next=[] # list with the next objects in the flow
# self.nextIds=[] # list with the ids of the next objects in the flow
# self.previousIds=[] # list with the ids of the previous objects in the flow.
# # For the source it is always empty!
self.type="Source" #String that shows the type of object
self.rng = RandomNumberGenerator(self, **interarrivalTime)
self.item=Globals.getClassFromName(entity) #the type of object that the Source will generate
def initialize(self):
# using the Process __init__ and not the CoreObject __init__
CoreObject.initialize(self)
# initialize the internal Queue (type Resource) of the Source
self.Res=Resource(capacity=infinity)
self.Res.activeQ=[]
self.Res.waitQ=[]
def run(self):
# get active object and its queue
activeObject=self.getActiveObject()
activeObjectQueue=self.getActiveObjectQueue()
while 1:
entity=self.createEntity() # create the Entity object and assign its name
entity.creationTime=now() # assign the current simulation time as the Entity's creation time
entity.startTime=now() # assign the current simulation time as the Entity's start time
entity.currentStation=self # update the current station of the Entity
G.EntityList.append(entity)
self.outputTrace(entity.name, "generated") # output the trace
activeObjectQueue.append(entity) # append the entity to the resource
self.numberOfArrivals+=1 # we have one new arrival
G.numberOfEntities+=1
yield hold,self,self.calculateInterarrivalTime() # wait until the next arrival
#============================================================================
# sets the routing out element for the Source
#============================================================================
def defineRouting(self, successorList=[]):
self.next=successorList # only successors allowed for the source
#============================================================================
# creates an Entity
#============================================================================
def createEntity(self):
return self.item(id = self.item.type+str(G.numberOfEntities), name = self.item.type+str(self.numberOfArrivals)) #return the newly created Entity
#============================================================================
# calculates the processing time
#============================================================================
def calculateInterarrivalTime(self):
return self.rng.generateNumber() #this is if we have a default interarrival time for all the entities
from implement_observers import DigitObserver, GraphObserver
from RandomNumberGenerator import RandomNumberGenerator
if __name__ == "__main__":
generator = RandomNumberGenerator()
observer1 = DigitObserver()
observer2 = GraphObserver()
generator.add_observer(observer1)
generator.add_observer(observer2)
generator.execute()
class PeriodicMaintenance(ObjectInterruption):
def __init__(self, id='',name='',victim=None, distribution=None, index=0, repairman=None,**kw):
ObjectInterruption.__init__(self,id,name,victim=victim)
self.rngTTF=RandomNumberGenerator(self, distribution.get('TTF',{'Fixed':{'mean':100}}))
self.rngTTR=RandomNumberGenerator(self, distribution.get('TTR',{'Fixed':{'mean':10}}))
self.name="F"+str(index)
self.repairman=repairman # the resource that may be needed to fix the failure
# if now resource is needed this will be "None"
self.type="PeriodicMaintenance"
def initialize(self):
ObjectInterruption.initialize(self)
self.victimStartsProcess=self.env.event()
self.victimEndsProcess=self.env.event()
# =======================================================================
# The run method for the failure which has to served by a repairman
# =======================================================================
def run(self):
while 1:
# if the time that the victim is off-shift should not be counted
timeToFailure=self.rngTTF.generateNumber()
remainingTimeToFailure=timeToFailure
failureNotTriggered=True
yield self.env.timeout(remainingTimeToFailure)
if self.victim.isProcessing:
self.victim.isWorkingOnTheLast=True
self.waitingSignal=True
self.expectedSignals['endedLastProcessing']=1
self.expectedSignals['victimFailed']=1
receivedEvent=yield self.env.any_of([self.victim.endedLastProcessing , self.victimFailed])
if self.victim.endedLastProcessing in receivedEvent:
transmitter, eventTime=self.victim.endedLastProcessing.value
self.victim.endedLastProcessing=self.env.event()
elif self.victimFailed in receivedEvent:
transmitter, eventTime=self.victimFailed.value
self.victimFailed=self.env.event()
# interrupt the victim
self.interruptVictim() # interrupt the victim
# check in the ObjectInterruptions of the victim. If there is a one that is waiting for victimFailed send it
for oi in self.victim.objectInterruptions:
if oi.expectedSignals['victimFailed']:
self.sendSignal(receiver=oi, signal=oi.victimFailed)
self.victim.Up=False
self.victim.timeLastFailure=self.env.now
self.outputTrace(self.victim.name,"is down")
# update the failure time
failTime=self.env.now
if(self.repairman and self.repairman!="None"): # if the failure needs a resource to be fixed,
# the machine waits until the
# resource is available
with self.repairman.getResource().request() as request:
yield request
# update the time that the repair started
timeOperationStarted=self.env.now
self.repairman.timeLastOperationStarted=self.env.now
yield self.env.timeout(self.rngTTR.generateNumber()) # wait until the repairing process is over
self.victim.totalFailureTime+=self.env.now-failTime
self.reactivateVictim() # since repairing is over, the Machine is reactivated
self.victim.Up=True
self.outputTrace(self.victim.name,"is up")
self.repairman.totalWorkingTime+=self.env.now-timeOperationStarted
continue
yield self.env.timeout(self.rngTTR.generateNumber()) # wait until the repairing process is over
# add the failure
# if victim is off shift add only the fail time before the shift ended
if not self.victim.onShift and failTime < self.victim.timeLastShiftEnded:
self.victim.totalFailureTime+=self.victim.timeLastShiftEnded-failTime
# if the victim was off shift since the start of the failure add nothing
elif not self.victim.onShift and failTime >= self.victim.timeLastShiftEnded:
pass
# if victim was off shift in the start of the fail time, add on
elif self.victim.onShift and failTime < self.victim.timeLastShiftStarted:
self.victim.totalFailureTime+=self.env.now-self.victim.timeLastShiftStarted
# this can happen only if deteriorationType is constant
assert self.deteriorationType=='constant', 'object got failure while off-shift and deterioration type not constant'
else:
self.victim.totalFailureTime+=self.env.now-failTime
self.reactivateVictim() # since repairing is over, the Machine is reactivated
self.victim.Up=True
self.outputTrace(self.victim.name,"is up")
class MouldAssembly(MachineJobShop):
# =======================================================================
# parses inputs if they are given in a dictionary
# =======================================================================
def parseInputs(self, **kw):
from Globals import G
G.MouldAssemblyList.append(self)
# =======================================================================
# the initialize method
# =======================================================================
def initialize(self):
self.mouldParent = None # the mould's to be assembled parent order
self.mouldToBeCreated = None # the mould to be assembled
MachineJobShop.initialize(self) # run default behaviour
# =======================================================================
# getEntity method that gets the entity from the giver
# it should run in a loop till it get's all the entities from the same order
# (with the flag componentsReadyForAssembly set)
# it is run only once, and receives all the entities to be assembled inside a while loop
# =======================================================================
def getEntity(self):
activeObject = self.getActiveObject()
giverObject = activeObject.getGiverObject()
# get the first entity from the predecessor
# TODO: each MachineJobShop.getEntity is invoked,
# the self.procTime is updated. Have to decide where to assign
# the processing time of the assembler
activeEntity = MachineJobShop.getEntity(self)
# this is kept so that in the next loop it will not try to re-get this Entity
firstObtained = activeEntity
# check weather the activeEntity is of type Mould
if activeEntity.type == 'Mould':
# and return the mould received
return activeEntity
# otherwise, collect all the entities to be assembled
# read the number of basic and secondary components of the moulds
capacity = len(activeEntity.order.getAssemblyComponents())
# clear the active object queue
del activeObject.getActiveObjectQueue()[:]
# and set the capacity of the internal queue of the assembler
activeObject.updateCapacity(capacity)
# append the activeEntity to the activeObjectQueue
activeObjectQueue = activeObject.getActiveObjectQueue()
activeObjectQueue.append(activeEntity)
# loop through the basic/secondary components of the order that is currently obtained
# all the components are received at the same time
for entity in activeEntity.order.getAssemblyComponents():
# continue for the one that is already obtained before
if entity is firstObtained:
continue
self.entityToGet = entity
# get the next component
activeEntity = MachineJobShop.getEntity(self)
# check whether the activeEntity is of type Mould
try:
if activeEntity.type == 'Mould':
# and return the mould received
raise AssembleMouldError(
'Having already received an orderComponent the assembler\
is not supposed to receive an object of type Mould'
)
# check if the last component received has the same parent order as the previous one
elif not (activeEntity.order is activeObjectQueue[1].order):
raise AssembleMouldError(
'The orderComponents received by the assembler must have the\
same parent order')
except AssembleMouldError as mouldError:
print 'Mould Assembly Error: {0}'.format(mouldError)
return False
# perform the assembly-action and return the assembled mould
activeEntity = activeObject.assemble()
return activeEntity
# =======================================================================
# method that updates the capacity according to the componentsList of the
# activeEntity's parent order
# =======================================================================
def updateCapacity(self, capacity):
activeObject = self.getActiveObject()
self.capacity = capacity
self.Res = simpy.Resource(self.env, self.capacity)
# =======================================================================
# assemble method that assembles the components together to a mould (order
# and returns the product of the assembly. Furthermore, it resets the capacity
# of the internal queue to 1
# =======================================================================
def assemble(self):
activeObject = self.getActiveObject()
# get the internal queue of the active core object
activeObjectQueue = activeObject.getActiveObjectQueue()
# assert that all the components are of the same parent order
for entity in activeObjectQueue:
assert entity.order==activeObjectQueue[0].order,\
'The components residing in the MouldAssembly internal queue\
are not of the same parent order!'
# if we have to create a new Entity (mould) this should be modified
# we need the new entity's route, priority, isCritical flag, etc.
self.mouldParent = activeObjectQueue[0].order
# assert that there is a parent order
assert self.mouldParent.type == 'Order', 'the type of the assembled to be mould\' s parent is not correct'
# delete the contents of the internal queue
temp_activeObjectQueue = list(activeObjectQueue)
for element in temp_activeObjectQueue:
# update their schedule
element.schedule[-1]["exitTime"] = self.env.now
# remove the elements from the activeObjectQueue and reset the current station of the entity
activeObjectQueue.remove(element)
element.currentStation = None
del temp_activeObjectQueue[:]
# after assembling reset the capacity
activeObject.updateCapacity(1)
#if there is a mould to be assembled
try:
if self.mouldParent:
# find the component which is of type Mould
# there must be only one mould component
for entity in self.mouldParent.componentsList:
entityClass = entity.get('_class', None)
if entityClass == 'Dream.Mould':
self.mouldToBeCreated = entity
break
# create the mould
self.createMould(self.mouldToBeCreated)
# check if there is a need for manual processing
self.checkForManualOperation(type='Processing',
entity=self.mouldToBeCreated)
# check if there is a need for manual processing
self.checkForManualOperation(type='Setup',
entity=self.mouldToBeCreated)
# set the created mould as WIP
import Globals
Globals.setWIP([self.mouldToBeCreated])
# read the activeObjectQueue again as it has been updated by the setWIP()
activeObjectQueue = activeObject.getActiveObjectQueue()
# reset attributes
self.mouldParent = None
self.mouldToBeCreated = None
# return the assembled mould
return activeObjectQueue[0]
else:
raise AssembleMouldError('There is no mould to be assembled')
except AssembleMouldError as mouldError:
print 'Mould Assembly Error: {0}'.format(mouldError)
# =======================================================================
# creates the mould
# =======================================================================
def createMould(self, component):
#read attributes from the json or from the orderToBeDecomposed
id = component.get('id', 'not found')
name = component.get('name', 'not found')
try:
# dummy variable that holds the routes of the jobs the route from the JSON file is a sequence of dictionaries
JSONRoute = component.get('route', [])
# variable that holds the argument used in the Job initiation hold None for each entry in the 'route' list
route = [x for x in JSONRoute] # copy JSONRoute
# assert that the assembler is in the moulds route and update the initial step of the mould's route
firstStep = route.pop(0)
assert (self.id in firstStep.get('stationIdsList',[])),\
'the assembler must be in the mould-to-be-created route\' initial step'
# normal processing operation
processingTime = firstStep['processingTime']
processingTime = self.getOperationTime(processingTime)
self.rng = RandomNumberGenerator(self, processingTime)
self.procTime = self.rng.generateNumber()
# update the activeObject's processing time according to the readings in the mould's route
processDistType = processingTime.keys()[0]
procTime = float(processingTime[processDistType].get('mean', 0))
processOpType = firstStep.get('operationType', {}).get(
'Processing', 'not found') # can be manual/automatic
# task_id
task_id = firstStep.get('task_id', None)
# sequence
sequence = firstStep.get('sequence', None)
# operator
operator = firstStep.get('operator', {})
# technology
technology = firstStep.get('technology', None)
# quantity
quantity = firstStep.get('quantity', None)
# setup operation
setupTime = firstStep.get('setupTime', None)
if setupTime:
setupTime = self.getOperationTime(setupTime)
self.stpRng = RandomNumberGenerator(self, setupTime)
# update the activeObject's processing time according to the readings in the mould's route
setupDistType = setupTime.keys()[0]
setTime = float(setupTime[setupDistType].get('mean', 0))
setupOpType = firstStep.get('operationType', {}).get(
'Setup', 'not found') # can be manual/automatic
# update the first step of the route with the activeObjects id as sole element of the stationIdsList
route.insert(0, {'stationIdsList':[str(self.id)],
'processingTime':{str(processDistType):{'mean':str(procTime)}},\
'setupTime':{str(setupDistType):{'mean':str(setupTime)}},
'operationType':{'Processing':processOpType,'Setup':setupOpType}})
else:
# update the first step of the route with the activeObjects id as sole element of the stationIdsList
route.insert(
0, {
'stationIdsList': [str(self.id)],
'processingTime': {
str(processDistType): {
'mean': str(procTime)
}
},
'operationType': {
'Processing': processOpType
}
})
# if there is task_id then add it to the route
if task_id:
route[0]["task_id"] = task_id
# if there is sequence then add it to the route
if sequence:
route[0]["sequence"] = sequence
# if there is operator then add it to the route
if operator:
route[0]["operator"] = operator
# if there is technology then add it to the route
if technology:
route[0]["technology"] = technology
# if there is quantity then add it to the route
if quantity != None:
route[0]["quantity"] = quantity
#Below it is to assign an exit if it was not assigned in JSON
#have to talk about it with NEX
exitAssigned = False
for element in route:
elementIds = element.get('stationIdsList', [])
for obj in G.ObjList:
for elementId in elementIds:
if obj.id == elementId and obj.type == 'Exit':
exitAssigned = True
# assign an exit to the route of the mould
if not exitAssigned:
exitId = None
for obj in G.ObjList:
if obj.type == 'Exit':
exitId = obj.id
break
if exitId:
route.append({
'stationIdsList': [str(exitId)],
'processingTime': {}
})
# keep a reference of all extra properties passed to the job
extraPropertyDict = {}
for key, value in component.items():
if key not in ('_class', 'id'):
extraPropertyDict[key] = value
# create and initiate the OrderComponent
from Mould import Mould
M=Mould(id, name, route, \
priority=self.mouldParent.priority, \
order=self.mouldParent,\
dueDate=self.mouldParent.dueDate, \
orderDate=self.mouldParent.orderDate, \
extraPropertyDict=extraPropertyDict,\
isCritical=self.mouldParent.isCritical)
# update the mouldToBeCreated
self.mouldToBeCreated = M
G.JobList.append(M)
G.WipList.append(M)
G.EntityList.append(M)
G.MouldList.append(M)
#initialize the component
M.initialize()
except:
# added for testing
print 'the mould to be created', component.get(
'name', 'not found'), 'cannot be created', 'time', self.env.now
raise
class MachineJobShop(Machine):
# =======================================================================
# set all the objects in previous and next
# =======================================================================
def initialize(self):
from Globals import G
self.previous=G.ObjList
self.next=[]
Machine.initialize(self) #run default behaviour
# =======================================================================
# gets an entity from the predecessor that the predecessor index points to
# =======================================================================
def getEntity(self):
activeObject=self.getActiveObject()
activeEntity=Machine.getEntity(self) #run the default code
# read the processing time from the corresponding remainingRoute entry
processingTime=activeEntity.remainingRoute[0].get('processingTime',{})
processingTime=self.getOperationTime(processingTime)
self.rng=RandomNumberGenerator(self, processingTime)
self.procTime=self.rng.generateNumber()
# check if there is a need for manual processing
self.checkForManualOperation(type='Processing',entity=activeEntity)
# read the setup time from the corresponding remainingRoute entry
setupTime=activeEntity.remainingRoute[0].get('setupTime',{})
setupTime=self.getOperationTime(setupTime)
self.stpRng=RandomNumberGenerator(self, setupTime)
# check if there is a need for manual processing
self.checkForManualOperation(type='Setup',entity=activeEntity)
activeEntity.currentStep = activeEntity.remainingRoute.pop(0) #remove data from the remaining route of the entity
if activeEntity.currentStep:
# update the task_id of the currentStep dict within the schedule
try:
activeEntity.schedule[-1]["task_id"] = activeEntity.currentStep["task_id"]
# if there is currentOperator then update the taskId of corresponding step of their schedule according to the task_id of the currentStep
if self.currentOperator:
self.currentOperator.schedule[-1]["task_id"] = activeEntity.currentStep["task_id"]
except KeyError:
pass
return activeEntity
#===========================================================================
# update the next list of the object based on the activeEentity
#===========================================================================
def updateNext(self,entity=None):
activeObject = self.getActiveObject()
activeEntity=entity
# read the possible receivers - update the next list
import Globals
# XXX: in the case of MouldAssembler there is no next defined in the route of the entities that are received
# the position activeEntity.remainingRoute[1] is out of bound. the next should be updated by the remaining route of the entity to be assembled
if len(activeEntity.remainingRoute)>1:
nextObjectIds=activeEntity.remainingRoute[1].get('stationIdsList',[])
nextObjects = []
for nextObjectId in nextObjectIds:
nextObject = Globals.findObjectById(nextObjectId)
nextObjects.append(nextObject)
# update the next list of the object
for nextObject in nextObjects:
# append only if not already in the list
if nextObject not in activeObject.next:
activeObject.next.append(nextObject)
# =======================================================================
# calculates the processing time
# =======================================================================
def calculateProcessingTime(self):
# this is only for processing of the initial wip
if self.isProcessingInitialWIP:
self.procTime = self.rng.generateNumber()
return self.procTime #this is the processing time for this unique entity
#===========================================================================
# get the initial operation times (setup/processing);
# XXX initialy only setup time is calculated here
#===========================================================================
def calculateInitialOperationTimes(self):
# read the setup/processing time from the first entry of the full route
activeEntity=self.getActiveObjectQueue()[0]
#if the entity has its route defined in the BOM then remainingProcessing/SetupTime is provided
# XX consider moving setupUPtime update to checkForManualOperationTypes as Setup is performed before Processing
if activeEntity.routeInBOM:
processingTime=self.getOperationTime(activeEntity.remainingProcessingTime)
setupTime=self.getOperationTime(activeEntity.remainingSetupTime)
else: # other wise these should be read from the route
processingTime=activeEntity.route[0].get('processingTime',{})
processingTime=self.getOperationTime(processingTime)
setupTime=activeEntity.route[0].get('setupTime',{})
setupTime=self.getOperationTime(setupTime)
self.rng=RandomNumberGenerator(self, processingTime)
self.stpRng=RandomNumberGenerator(self, setupTime)
# =======================================================================
# checks if the Queue can accept an entity
# it checks also the next station of the Entity
# and returns true only if the active object is the next station
# =======================================================================
def canAccept(self, callerObject=None):
activeObjectQueue=self.Res.users
thecaller=callerObject
#return according to the state of the Queue
# also check if (if the machine is to be operated) there are available operators
if (self.operatorPool!='None' and (any(type=='Load' for type in self.multOperationTypeList))):
return self.operatorPool.checkIfResourceIsAvailable()\
and len(activeObjectQueue)<self.capacity\
and self.checkIfMachineIsUp()\
and self.isInRouteOf(thecaller)\
and not self.entryIsAssignedTo()
else:
return len(activeObjectQueue)<self.capacity\
and self.checkIfMachineIsUp()\
and self.isInRouteOf(thecaller)\
and not self.entryIsAssignedTo()
#===========================================================================
# method used to check whether the station is in the entity-to-be-received route
#===========================================================================
def isInRouteOf(self, callerObject=None):
activeObjectQueue=self.Res.users
thecaller=callerObject
# if the caller is not defined then return True. We are only interested in checking whether
# the station can accept whatever entity from whichever giver
if not thecaller:
return True
#check it the caller object holds an Entity that requests for current object
if len(thecaller.Res.users)>0:
# TODO: make sure that the first entity of the callerObject is to be disposed
activeEntity=thecaller.Res.users[0]
# if the machine's Id is in the list of the entity's next stations
if self.id in activeEntity.remainingRoute[0].get('stationIdsList',[]):
return True
return False
# =======================================================================
# checks if the Machine can dispose an entity.
# Returns True only to the potential receiver
# =======================================================================
def haveToDispose(self, callerObject=None):
activeObjectQueue=self.Res.users
thecaller=callerObject
#if we have only one successor just check if machine waits to dispose and also is up
# this is done to achieve better (cpu) processing time
if(callerObject==None):
return len(activeObjectQueue)>0\
and self.waitToDispose\
and self.checkIfActive()\
#return True if the Machine in the state of disposing and the caller is the receiver
return len(activeObjectQueue)>0\
and self.waitToDispose\
and self.checkIfActive()\
and thecaller.isInRouteOf(self)
# =======================================================================
# method to execute preemption
# =======================================================================
def preempt(self):
# self.printTrace(self.id,preempted='')
activeEntity=self.Res.users[0] #get the active Entity
#calculate the remaining processing time
#if it is reset then set it as the original processing time
if self.resetOnPreemption:
remainingProcessingTime=self.procTime
#else subtract the time that passed since the entity entered
#(may need also failure time if there was. TO BE MELIORATED)
else:
remainingProcessingTime=self.procTime-(self.env.now-self.timeLastEntityEntered)
#update the remaining route of activeEntity
activeEntity.remainingRoute.insert(0, {'stationIdsList':[str(self.id)],\
'processingTime':\
{'Fixed':{'mean':str(remainingProcessingTime)}}})
activeEntity.remainingRoute.insert(0, {'stationIdsList':[str(self.lastGiver.id)],\
'processingTime':{'Fixed':{'mean':'0'}}})
#set the receiver as the object where the active entity was preempted from
self.receiver=self.lastGiver
self.next=[self.receiver]
self.waitToDispose=True #set that I have to dispose
self.receiver.timeLastEntityEnded=self.env.now #required to count blockage correctly in the preemptied station
# TODO: use a signal and wait for it, reactivation is not recognised as interruption
# reactivate(self)
if self.expectedSignals['preemptQueue']:
self.sendSignal(receiver=self, signal=self.preemptQueue)
# TODO: consider the case when a failure has the Station down. The event preempt will not be received now()
# but at a later simulation time.
#===========================================================================
# extend the default behaviour to check if whether the station
# is in the route of the entity to be received
#===========================================================================
def canAcceptAndIsRequested(self,callerObject):
giverObject=callerObject
assert giverObject, 'there must be a caller for canAcceptAndIsRequested'
if self.isInRouteOf(giverObject):
if Machine.canAcceptAndIsRequested(self,giverObject):
self.readLoadTime(giverObject)
return True
return False
#===========================================================================
# to be called by canAcceptAndIsRequested if it is to return True.
# the load time of the Entity must be read
#===========================================================================
def readLoadTime(self,callerObject=None):
assert callerObject!=None, 'the caller of readLoadTime cannot be None'
thecaller=callerObject
thecaller.sortEntities()
activeEntity=thecaller.Res.users[0]
# read the load time from the corresponding remainingRoute entry
loadTime=activeEntity.remainingRoute[0].get('loadTime',{})
loadTime=self.getOperationTime(loadTime)
self.loadRng=RandomNumberGenerator(self, loadTime)
#===========================================================================
# get the initial operationTypes (Setup/Processing) : manual or automatic
#===========================================================================
def checkInitialOperationTypes(self):
# check if manual Setup is required
self.checkForManualOperation(type='Setup')
# check if manual Processing is required
self.checkForManualOperation(type='Processing')
#===========================================================================
# check if the operation defined as an argument requires manual operation
#===========================================================================
def checkForManualOperation(self,type,entity=None):
typeDict={'Setup':'setupTime', 'Processing':'processingTime'}
assert type!=None, 'a type must be defined for the checkForManualOperation method'
if not entity:
activeEntity=self.getActiveObjectQueue()[0]
else:
activeEntity=entity
# read the definition of the time from the remainingRoute dict
if not self.isProcessingInitialWIP:
operationTypeDict=activeEntity.remainingRoute[0].get('operationType',{})
operationType=operationTypeDict.get(str(type),'not defined')
else: # if the active entity is initialWIP at the start of simulation
operationType=activeEntity.initialOperationTypes.get(str(type),'not defined')
# if the operationType is not 'not defined'
if operationType!='not defined':
# if the operationType key has value 1 (manual operation)
if operationType:
# add setup to the multOpeartionTypeList
if not type in self.multOperationTypeList:
self.multOperationTypeList.append(str(type))
else: # otherwise remove it from the multOperationTypeList
if type in self.multOperationTypeList:
self.multOperationTypeList.remove(str(type))
# =======================================================================
# removes an entity from the Machine
# extension to remove possible receivers accordingly
# =======================================================================
def removeEntity(self, entity=None):
receiverObject=self.receiver
activeEntity=Machine.removeEntity(self, entity) #run the default method
removeReceiver=True
# search in the internalQ. If an entity has the same receiver do not remove
for ent in self.Res.users:
nextObjectIds=ent.remainingRoute[0].get('stationIdsList',[])
if receiverObject.id in nextObjectIds:
removeReceiver=False
# if not entity had the same receiver then the receiver will be removed
if removeReceiver:
self.next.remove(receiverObject)
return activeEntity
class Break(ObjectInterruption):
def __init__(self, id='',name='',victim=None, distribution={},
endUnfinished=True,offShiftAnticipation=0,**kw):
ObjectInterruption.__init__(self,id,name,victim=victim)
self.rngTTB=RandomNumberGenerator(self, distribution.get('TTB',{'Fixed':{'mean':100}}))
self.rngTTR=RandomNumberGenerator(self, distribution.get('TTR',{'Fixed':{'mean':10}}))
self.type="Break"
# end current wip before going to break
self.endUnfinished=endUnfinished
# if the break is close to end of shift below a limit it will be suspended
self.offShiftAnticipation=offShiftAnticipation
def initialize(self):
ObjectInterruption.initialize(self)
self.victimStartsProcess=self.env.event()
self.victimEndsProcess=self.env.event()
# =======================================================================
# The run method for the break which has to served by a repairman
# =======================================================================
def run(self):
from CoreObject import CoreObject
from ObjectResource import ObjectResource
while 1:
# if the victim is off-shift wait for the victim to become on-shift
if not self.victim.onShift:
self.isWaitingForVictimOnShift=True
self.expectedSignals['victimOnShift']=1
yield self.victimOnShift
self.victimOnShift=self.env.event()
timeToBreak=self.rngTTB.generateNumber()
remainingTimeToBreak=timeToBreak
self.expectedSignals['victimOffShift']=1
self.isWaitingForVictimOffShift=True
# wait for the break or the end off shift of the victim
receivedEvent = yield self.env.any_of([self.env.timeout(remainingTimeToBreak),self.victimOffShift])
# if the victim became off shift the loop should start again (to wait on-shift etc)
if self.victimOffShift in receivedEvent:
transmitter, eventTime=self.victimOffShift.value
assert eventTime==self.env.now, 'victimOffShift was triggered earlier, not now'
# reset the signalparam of the victimOffShift event
self.victimOffShift=self.env.event()
continue
# check if we are close to the end of the shift. If yes then the break may be suspended
# (depending on offShiftAnticipation)
timeToNextOfShift=None
for oi in self.victim.objectInterruptions:
if oi.type=='ShiftScheduler':
if oi.remainingShiftPattern:
timeToNextOfShift=oi.remainingShiftPattern[0][1]
if timeToNextOfShift:
if self.offShiftAnticipation>=timeToNextOfShift-self.env.now:
continue
# interrupt the victim
# if the victim is station
if issubclass(self.victim.__class__, CoreObject):
# if the mode is to end current work before going to break and there is current work,
# wait for victimEndedLastProcessing or victimFailed
# signal before going into break
if self.endUnfinished and self.victim.isProcessing:
self.victim.isWorkingOnTheLast=True
self.waitingSignal=True
self.expectedSignals['endedLastProcessing']=1
self.expectedSignals['victimFailed']=1
receivedEvent=yield self.env.any_of([self.victim.endedLastProcessing , self.victimFailed])
if self.victim.endedLastProcessing in receivedEvent:
transmitter, eventTime=self.victim.endedLastProcessing.value
self.victim.endedLastProcessing=self.env.event()
elif self.victimFailed in receivedEvent:
transmitter, eventTime=self.victimFailed.value
self.victimFailed=self.env.event()
self.interruptVictim()
# if the victim is operator
elif issubclass(self.victim.__class__, ObjectResource):
# if the operator is working in a station and the mode is
# to stop current work in the end of shift
# signal to the station that the operator has to leave
station=self.victim.workingStation
if station:
if not self.endUnfinished and station.expectedSignals['processOperatorUnavailable']:
self.sendSignal(receiver=station, signal=station.processOperatorUnavailable)
if self.victim.schedule:
if not self.victim.schedule[-1].get("exitTime", None):
self.victim.schedule[-1]["exitTime"] = self.env.now
self.victim.schedule.append({"station": {'id':'on-break'},
"entranceTime": self.env.now})
self.requestAllocation()
self.victim.timeLastBreakStarted=self.env.now
self.victim.onBreak=True # get the victim on break
self.outputTrace(self.victim.name,"starts break")
# update the break time
breakTime=self.env.now
self.expectedSignals['victimOffShift']=1
self.isWaitingForVictimOffShift=True
# wait for the break or the end off shift of the victim
receivedEvent = yield self.env.any_of([self.env.timeout(self.rngTTR.generateNumber()),self.victimOffShift])
# if the victim became off shift the break is considered over and
# the loop should start again (to wait on-shift etc)
if self.victimOffShift in receivedEvent:
transmitter, eventTime=self.victimOffShift.value
assert eventTime==self.env.now, 'victimOffShift was triggered earlier, not now'
# reset the signalparam of the victimOffShift event
self.victimOffShift=self.env.event()
self.outputTrace(self.victim.name,"went off-shift so not on break anymore")
else:
self.outputTrace(self.victim.name,"returns from break")
if issubclass(self.victim.__class__, CoreObject):
self.reactivateVictim() # re-activate the victim in case it was interrupted
else:
if self.victim.schedule:
if not self.victim.schedule[-1].get("exitTime", None):
self.victim.schedule[-1]["exitTime"] = self.env.now
self.requestAllocation()
self.victim.timeLastBreakEnded=self.env.now
self.victim.totalBreakTime+=self.env.now-breakTime
self.victim.onBreak=False # get the victim on break
class MachineJobShop(Machine):
# =======================================================================
# set all the objects in previous and next
# =======================================================================
def initialize(self):
from Globals import G
self.previous=G.ObjList
self.next=[]
Machine.initialize(self) #run default behaviour
# =======================================================================
# gets an entity from the predecessor that the predecessor index points to
# =======================================================================
def getEntity(self):
activeObject=self.getActiveObject()
activeEntity=Machine.getEntity(self) #run the default code
# read the processing time from the corresponding remainingRoute entry
processingTime=activeEntity.remainingRoute[0].get('processingTime',{})
processingTime=self.getOperationTime(processingTime)
self.rng=RandomNumberGenerator(self, processingTime)
self.procTime=self.rng.generateNumber()
# check if there is a need for manual processing
self.checkForManualOperation(type='Processing',entity=activeEntity)
# read the setup time from the corresponding remainingRoute entry
setupTime=activeEntity.remainingRoute[0].get('setupTime',{})
setupTime=self.getOperationTime(setupTime)
self.stpRng=RandomNumberGenerator(self, setupTime)
# check if there is a need for manual processing
self.checkForManualOperation(type='Setup',entity=activeEntity)
removedStep = activeEntity.remainingRoute.pop(0) #remove data from the remaining route of the entity
return activeEntity
#===========================================================================
# update the next list of the object based on the activeEentity
#===========================================================================
def updateNext(self,entity=None):
activeObject = self.getActiveObject()
activeEntity=entity
# read the possible receivers - update the next list
import Globals
# XXX: in the case of MouldAssembler there is no next defined in the route of the entities that are received
# the position activeEntity.remainingRoute[1] is out of bound. the next should be updated by the remaining route of the entity to be assembled
if len(activeEntity.remainingRoute)>1:
nextObjectIds=activeEntity.remainingRoute[1].get('stationIdsList',[])
nextObjects = []
for nextObjectId in nextObjectIds:
nextObject = Globals.findObjectById(nextObjectId)
nextObjects.append(nextObject)
# update the next list of the object
for nextObject in nextObjects:
# append only if not already in the list
if nextObject not in activeObject.next:
activeObject.next.append(nextObject)
# =======================================================================
# calculates the processing time
# =======================================================================
def calculateProcessingTime(self):
# this is only for processing of the initial wip
if self.isProcessingInitialWIP:
# read the setup/processing time from the first entry of the full route
activeEntity=self.getActiveObjectQueue()[0]
#if the entity has its route defined in the BOM then remainingProcessing/SetupTime is provided
# XX consider moving setupUPtime update to checkForManualOperationTypes as Setup is performed before Processing
if activeEntity.routeInBOM:
processingTime=self.getOperationTime(activeEntity.remainingProcessingTime)
setupTime=self.getOperationTime(activeEntity.remainingSetupTime)
else: # other wise these should be read from the route
processingTime=activeEntity.route[0].get('processingTime',{})
processingTime=self.getOperationTime(processingTime)
setupTime=activeEntity.route[0].get('setupTime',{})
setupTime=self.getOperationTime(setupTime)
self.rng=RandomNumberGenerator(self, processingTime)
self.procTime=self.rng.generateNumber()
self.stpRng=RandomNumberGenerator(self, setupTime)
return self.procTime #this is the processing time for this unique entity
# =======================================================================
# checks if the Queue can accept an entity
# it checks also the next station of the Entity
# and returns true only if the active object is the next station
# =======================================================================
def canAccept(self, callerObject=None):
activeObjectQueue=self.Res.users
thecaller=callerObject
#return according to the state of the Queue
# also check if (if the machine is to be operated) there are available operators
if (self.operatorPool!='None' and (any(type=='Load' for type in self.multOperationTypeList))):
return self.operatorPool.checkIfResourceIsAvailable()\
and len(activeObjectQueue)<self.capacity\
and self.checkIfMachineIsUp()\
and self.isInRouteOf(thecaller)\
and not self.entryIsAssignedTo()
else:
return len(activeObjectQueue)<self.capacity\
and self.checkIfMachineIsUp()\
and self.isInRouteOf(thecaller)\
and not self.entryIsAssignedTo()
#===========================================================================
# method used to check whether the station is in the entity-to-be-received route
#===========================================================================
def isInRouteOf(self, callerObject=None):
activeObjectQueue=self.Res.users
thecaller=callerObject
# if the caller is not defined then return True. We are only interested in checking whether
# the station can accept whatever entity from whichever giver
if not thecaller:
return True
#check it the caller object holds an Entity that requests for current object
if len(thecaller.Res.users)>0:
# TODO: make sure that the first entity of the callerObject is to be disposed
activeEntity=thecaller.Res.users[0]
# if the machine's Id is in the list of the entity's next stations
if self.id in activeEntity.remainingRoute[0].get('stationIdsList',[]):
return True
return False
# =======================================================================
# checks if the Machine can dispose an entity.
# Returns True only to the potential receiver
# =======================================================================
def haveToDispose(self, callerObject=None):
activeObjectQueue=self.Res.users
thecaller=callerObject
#if we have only one successor just check if machine waits to dispose and also is up
# this is done to achieve better (cpu) processing time
if(callerObject==None):
return len(activeObjectQueue)>0\
and self.waitToDispose\
and self.checkIfActive()\
#return True if the Machine in the state of disposing and the caller is the receiver
return len(activeObjectQueue)>0\
and self.waitToDispose\
and self.checkIfActive()\
and thecaller.isInRouteOf(self)
# =======================================================================
# method to execute preemption
# =======================================================================
def preempt(self):
# self.printTrace(self.id,preempted='')
activeEntity=self.Res.users[0] #get the active Entity
#calculate the remaining processing time
#if it is reset then set it as the original processing time
if self.resetOnPreemption:
remainingProcessingTime=self.procTime
#else subtract the time that passed since the entity entered
#(may need also failure time if there was. TO BE MELIORATED)
else:
remainingProcessingTime=self.procTime-(self.env.now-self.timeLastEntityEntered)
#update the remaining route of activeEntity
activeEntity.remainingRoute.insert(0, {'stationIdsList':[str(self.id)],\
'processingTime':\
{'Fixed':{'mean':str(remainingProcessingTime)}}})
activeEntity.remainingRoute.insert(0, {'stationIdsList':[str(self.lastGiver.id)],\
'processingTime':{'Fixed':{'mean':'0'}}})
#set the receiver as the object where the active entity was preempted from
self.receiver=self.lastGiver
self.next=[self.receiver]
self.waitToDispose=True #set that I have to dispose
self.receiver.timeLastEntityEnded=self.env.now #required to count blockage correctly in the preemptied station
# TODO: use a signal and wait for it, reactivation is not recognised as interruption
# reactivate(self)
if self.expectedSignals['preemptQueue']:
self.sendSignal(receiver=self, signal=self.preemptQueue)
# TODO: consider the case when a failure has the Station down. The event preempt will not be received now()
# but at a later simulation time.
#===========================================================================
# extend the default behaviour to check if whether the station
# is in the route of the entity to be received
#===========================================================================
def canAcceptAndIsRequested(self,callerObject):
giverObject=callerObject
assert giverObject, 'there must be a caller for canAcceptAndIsRequested'
if self.isInRouteOf(giverObject):
if Machine.canAcceptAndIsRequested(self,giverObject):
self.readLoadTime(giverObject)
return True
return False
#===========================================================================
# to be called by canAcceptAndIsRequested if it is to return True.
# the load time of the Entity must be read
#===========================================================================
def readLoadTime(self,callerObject=None):
assert callerObject!=None, 'the caller of readLoadTime cannot be None'
thecaller=callerObject
thecaller.sortEntities()
activeEntity=thecaller.Res.users[0]
# read the load time from the corresponding remainingRoute entry
loadTime=activeEntity.remainingRoute[0].get('loadTime',{})
loadTime=self.getOperationTime(loadTime)
self.loadRng=RandomNumberGenerator(self, loadTime)
#===========================================================================
# get the initial operationTypes (Setup/Processing) : manual or automatic
#===========================================================================
def checkInitialOperationTypes(self):
# check if manual Setup is required
self.checkForManualOperation(type='Setup')
# check if manual Processing is required
self.checkForManualOperation(type='Processing')
#===========================================================================
# check if the operation defined as an argument requires manual operation
#===========================================================================
def checkForManualOperation(self,type,entity=None):
typeDict={'Setup':'setupTime', 'Processing':'processingTime'}
assert type!=None, 'a type must be defined for the checkForManualOperation method'
if not entity:
activeEntity=self.getActiveObjectQueue()[0]
else:
activeEntity=entity
# read the definition of the time from the remainingRoute dict
if not self.isProcessingInitialWIP:
operationTypeDict=activeEntity.remainingRoute[0].get('operationType',{})
operationType=operationTypeDict.get(str(type),'not defined')
else: # if the active entity is initialWIP at the start of simulation
operationType=activeEntity.initialOperationTypes.get(str(type),'not defined')
# if the operationType is not 'not defined'
if operationType!='not defined':
# if the operationType key has value 1 (manual operation)
if operationType:
# add setup to the multOpeartionTypeList
if not type in self.multOperationTypeList:
self.multOperationTypeList.append(str(type))
else: # otherwise remove it from the multOperationTypeList
if type in self.multOperationTypeList:
self.multOperationTypeList.remove(str(type))
# =======================================================================
# removes an entity from the Machine
# extension to remove possible receivers accordingly
# =======================================================================
def removeEntity(self, entity=None):
receiverObject=self.receiver
activeEntity=Machine.removeEntity(self, entity) #run the default method
removeReceiver=True
# search in the internalQ. If an entity has the same receiver do not remove
for ent in self.Res.users:
nextObjectIds=ent.remainingRoute[0].get('stationIdsList',[])
if receiverObject.id in nextObjectIds:
removeReceiver=False
# if not entity had the same receiver then the receiver will be removed
if removeReceiver:
self.next.remove(receiverObject)
return activeEntity
class Failure(ObjectInterruption):
def __init__(self, id='',name='',victim=None, distribution={}, index=0, repairman=None, offshift=False,
deteriorationType='constant',
waitOnTie=False,**kw):
ObjectInterruption.__init__(self,id,name,victim=victim)
self.rngTTF=RandomNumberGenerator(self, distribution.get('TTF',{'Fixed':{'mean':100}}))
self.rngTTR=RandomNumberGenerator(self, distribution.get('TTR',{'Fixed':{'mean':10}}))
self.name="F"+str(index)
self.repairman=repairman # the resource that may be needed to fix the failure
# if now resource is needed this will be "None"
self.type="Failure"
# shows how the time to failure is measured
# 'constant' means it counts not matter the state of the victim
# 'onShift' counts only if the victim is onShift
# 'working' counts only working time
self.deteriorationType=deteriorationType
# flag used to identify if the time between failures should be counted while the victim is off-shift
self.offshift=offshift
# flag to show if the failure will wait on tie with other events before interrupting the victim
self.waitOnTie=waitOnTie
def initialize(self):
ObjectInterruption.initialize(self)
self.victimStartsProcess=self.env.event()
self.victimEndsProcess=self.env.event()
# =======================================================================
# The run method for the failure which has to served by a repairman
# =======================================================================
def run(self):
while 1:
# if the time that the victim is off-shift should not be counted
timeToFailure=self.rngTTF.generateNumber()
remainingTimeToFailure=timeToFailure
failureNotTriggered=True
# if time to failure counts not matter the state of the victim
if self.deteriorationType=='constant':
yield self.env.timeout(remainingTimeToFailure)
# if time to failure counts only in onShift time
elif self.deteriorationType=='onShift':
while failureNotTriggered:
timeRestartedCounting=self.env.now
self.isWaitingForVictimOffShift=True
self.expectedSignals['victimOffShift']=1
receivedEvent=yield self.env.timeout(remainingTimeToFailure) | self.victimOffShift
# the failure should receive a signal if there is a shift-off triggered
if self.victimOffShift in receivedEvent:
assert self.victim.onShift==False, 'shiftFailure cannot recalculate TTF if the victim is onShift'
self.victimOffShift=self.env.event()
remainingTimeToFailure=remainingTimeToFailure-(self.env.now-timeRestartedCounting)
# wait for the shift to start again
self.isWaitingForVictimOnShift=True
self.expectedSignals['victimOnShift']=1
yield self.victimOnShift
self.isWaitingForVictimOnShift=False
self.victimOnShift=self.env.event()
assert self.victim.onShift==True, 'the victim of shiftFailure must be onShift to continue counting the TTF'
else:
self.isWaitingForVictimOffShift=False
failureNotTriggered=False
# if time to failure counts only in working time
elif self.deteriorationType=='working':
# wait for victim to start process
self.expectedSignals['victimStartsProcess']=1
yield self.victimStartsProcess
self.victimStartsProcess=self.env.event()
while failureNotTriggered:
timeRestartedCounting=self.env.now
self.expectedSignals['victimEndsProcess']=1
# wait either for the failure or end of process
receivedEvent=yield self.env.timeout(remainingTimeToFailure) | self.victimEndsProcess
if self.victimEndsProcess in receivedEvent:
self.victimEndsProcess=self.env.event()
remainingTimeToFailure=remainingTimeToFailure-(self.env.now-timeRestartedCounting)
self.expectedSignals['victimStartsProcess']=1
yield self.victimStartsProcess
# wait for victim to start again processing
self.victimStartsProcess=self.env.event()
else:
failureNotTriggered=False
# if the mode is to wait on tie before interruption add a dummy hold for 0
# this is done so that if processing finishes exactly at the time of interruption
# the processing will finish first (if this mode is selected)
if self.waitOnTie:
if hasattr(self.victim, 'timeToEndCurrentOperation'):
if float(self.victim.timeToEndCurrentOperation)==float(self.env.now):
yield self.env.timeout(0)
# interrupt the victim
self.interruptVictim() # interrupt the victim
# check in the ObjectInterruptions of the victim. If there is a one that is waiting for victimFailed send it
for oi in self.victim.objectInterruptions:
if oi.expectedSignals['victimFailed']:
self.sendSignal(receiver=oi, signal=oi.victimFailed)
self.victim.Up=False
self.victim.timeLastFailure=self.env.now
self.outputTrace(self.victim.name,"is down")
# update the failure time
failTime=self.env.now
if(self.repairman and self.repairman!="None"): # if the failure needs a resource to be fixed,
# the machine waits until the
# resource is available
with self.repairman.getResource().request() as request:
yield request
# update the time that the repair started
timeOperationStarted=self.env.now
self.repairman.timeLastOperationStarted=self.env.now
yield self.env.timeout(self.rngTTR.generateNumber()) # wait until the repairing process is over
self.victim.totalFailureTime+=self.env.now-failTime
self.reactivateVictim() # since repairing is over, the Machine is reactivated
self.victim.Up=True
self.outputTrace(self.victim.name,"is up")
self.repairman.totalWorkingTime+=self.env.now-timeOperationStarted
continue
yield self.env.timeout(self.rngTTR.generateNumber()) # wait until the repairing process is over
# add the failure
# if victim is off shift add only the fail time before the shift ended
if not self.victim.onShift and failTime < self.victim.timeLastShiftEnded:
self.victim.totalFailureTime+=self.victim.timeLastShiftEnded-failTime
# if the victim was off shift since the start of the failure add nothing
elif not self.victim.onShift and failTime >= self.victim.timeLastShiftEnded:
pass
# if victim was off shift in the start of the fail time, add on
elif self.victim.onShift and failTime < self.victim.timeLastShiftStarted:
self.victim.totalFailureTime+=self.env.now-self.victim.timeLastShiftStarted
# this can happen only if deteriorationType is constant
assert self.deteriorationType=='constant', 'object got failure while off-shift and deterioration type not constant'
else:
self.victim.totalFailureTime+=self.env.now-failTime
self.reactivateVictim() # since repairing is over, the Machine is reactivated
self.victim.Up=True
self.outputTrace(self.victim.name,"is up")
class Source(CoreObject):
#===========================================================================
# the __init__method of the Source class
#===========================================================================
def __init__(self, id, name, interArrivalTime=None, entity='Dream.Part',**kw):
# Default values
if not interArrivalTime:
interArrivalTime = {'Fixed': {'mean': 1}}
if 'Normal' in interArrivalTime.keys() and\
interArrivalTime['Normal'].get('max', None) is None:
interArrivalTime['Normal']['max'] = interArrivalTime['Normal']['mean'] + 5 * interArrivalTime['Normal']['stdev']
CoreObject.__init__(self, id, name)
# properties used for statistics
self.totalinterArrivalTime = 0 # the total interarrival time
self.numberOfArrivals = 0 # the number of entities that were created
self.type="Source" #String that shows the type of object
self.rng = RandomNumberGenerator(self, interArrivalTime)
self.item=Globals.getClassFromName(entity) #the type of object that the Source will generate
self.scheduledEntities=[] # list of creations that are scheduled. pattern is [timeOfCreation, EntityCounter]
from Globals import G
G.SourceList.append(self)
#===========================================================================
# The initialize method of the Source class
#===========================================================================
def initialize(self):
# using the Process __init__ and not the CoreObject __init__
CoreObject.initialize(self)
# initialize the internal Queue (type Resource) of the Source
# self.Res=Resource(capacity=infinity)
self.Res=simpy.Resource(self.env, capacity=float('inf'))
self.Res.users=[]
self.entityGenerator=EntityGenerator(victim=self) # the EntityGenerator of the Source
self.numberOfArrivals = 0
# self.entityGenerator.initialize()
# activate(self.entityGenerator,self.entityGenerator.run())
self.env.process(self.entityGenerator.run())
# self.entityCreated=SimEvent('an entity is created')
self.entityCreated=self.env.event()
# event used by router
# self.loadOperatorAvailable=SimEvent('loadOperatorAvailable')
self.loadOperatorAvailable=self.env.event()
self.scheduledEntities=[] # list of creations that are scheduled
self.expectedSignals['entityCreated']=1
self.expectedSignals['loadOperatorAvailable']=1
self.expectedSignals['canDispose']=1
#===========================================================================
# the generator of the Source class
#===========================================================================
def run(self):
# get active object and its queue
activeObject=self.getActiveObject()
activeObjectQueue=self.getActiveObjectQueue()
while 1:
# wait for any event (entity creation or request for disposal of entity)
self.expectedSignals['canDispose']=1
self.expectedSignals['entityCreated']=1
self.expectedSignals['loadOperatorAvailable']=1
receivedEvent=yield self.env.any_of([self.entityCreated, self.canDispose, self.loadOperatorAvailable])
self.printTrace(self.id, received='')
# if an entity is created try to signal the receiver and continue
if self.entityCreated in receivedEvent:
transmitter, eventTime=self.entityCreated.value
self.entityCreated=self.env.event()
# otherwise, if the receiver requests availability then try to signal him if there is anything to dispose of
if self.canDispose in receivedEvent:
transmitter, eventTime=self.canDispose.value
self.canDispose=self.env.event()
if self.loadOperatorAvailable in receivedEvent:
transmitter, eventTime=self.loadOperatorAvailable.value
self.loadOperatorAvailable=self.env.event()
if self.haveToDispose():
if self.signalReceiver():
continue
#===========================================================================
# add newly created entity to pendingEntities
#===========================================================================
def appendEntity(self, entity):
from Globals import G
assert entity, 'cannot append None entity'
activeEntity=entity
if G.RouterList:
# at the newly created entity to the pendingEntities
G.pendingEntities.append(activeEntity)
#============================================================================
# sets the routing out element for the Source
#============================================================================
def defineRouting(self, successorList=[]):
self.next=successorList # only successors allowed for the source
#============================================================================
# creates an Entity
#============================================================================
def createEntity(self):
self.printTrace(self.id, create='')
return self.item(id = self.item.type+str(G.numberOfEntities), name = self.item.type+str(self.numberOfArrivals)) #return the newly created Entity
#============================================================================
# calculates the processing time
#============================================================================
def calculateInterArrivalTime(self):
return self.rng.generateNumber() #this is if we have a default interarrival time for all the entities
# =======================================================================
# removes an entity from the Source
# =======================================================================
def removeEntity(self, entity=None):
if len(self.getActiveObjectQueue())==1 and len(self.scheduledEntities):
newEntity=self.createEntity() # create the Entity object and assign its name
newEntity.creationTime=self.scheduledEntities.pop(0) # assign the current simulation time as the Entity's creation time
newEntity.startTime=newEntity.creationTime # assign the current simulation time as the Entity's start time
#print self.env.now, 'getting from the list. StartTime=',newEntity.startTime
newEntity.currentStation=self # update the current station of the Entity
G.EntityList.append(newEntity)
self.getActiveObjectQueue().append(newEntity) # append the entity to the resource
self.numberOfArrivals+=1 # we have one new arrival
G.numberOfEntities+=1
self.appendEntity(newEntity)
activeEntity=CoreObject.removeEntity(self, entity) # run the default method
if len(self.getActiveObjectQueue())==1:
if self.expectedSignals['entityCreated']:
self.sendSignal(receiver=self, signal=self.entityCreated)
return activeEntity
class BatchScrapMachine(Machine):
# =======================================================================
# constructor run every time a new instance is created
# calls the Machine constructor, but also reads attributes for
# scraping distribution
# =======================================================================
def __init__(self, id, name, capacity=1, \
processingTime=None, repairman='None',\
scrapQuantity={},
operatorPool='None',operationType='None',\
setupTime=None, loadTime=None,
canDeliverOnInterruption=False,
**kw):
if not processingTime:
processingTime = {'distributionType': 'Fixed', 'mean': 1}
# initialize using the default method of the object
Machine.__init__(self,id=id,name=name,\
capacity=capacity,\
processingTime=processingTime,
repairman=repairman,
canDeliverOnInterruption=canDeliverOnInterruption,
operatorPool=operatorPool,operationType=operationType,\
setupTime=setupTime, loadTime=loadTime,
)
# set the attributes of the scrap quantity distribution
if not scrapQuantity:
scrapQuantity = {'Fixed': {'mean': 0}}
self.scrapRng = RandomNumberGenerator(self, scrapQuantity)
from Globals import G
G.BatchScrapMachineList.append(self)
# =======================================================================
# removes an Entity from the Object the Entity to be removed is passed
# as argument by getEntity of the receiver
# extends the default behaviour so that
# it can scrap a number of units before disposing the Batch/SubBatch
# =======================================================================
def removeEntity(self, entity=None):
activeEntity = Machine.removeEntity(self, entity)
scrapQuantity = self.scrapRng.generateNumber()
activeEntity.numberOfUnits -= int(
scrapQuantity
) # the scrapQuantity should be integer at whatever case
if activeEntity.numberOfUnits < 0:
activeEntity.numberOfUnits == 0
return activeEntity
# =======================================================================
# calculates the processing time
# extends the default behaviour so that
# the per-unit processing time is multiplied with the number of units
# =======================================================================
def calculateProcessingTime(self):
activeEntity = self.getActiveObjectQueue()[0]
# this is only for processing of the initial wip
if self.isProcessingInitialWIP:
if activeEntity.unitsToProcess:
return self.rng.generateNumber() * activeEntity.unitsToProcess
return self.rng.generateNumber() * activeEntity.numberOfUnits
class MouldAssembly(MachineJobShop):
# =======================================================================
# parses inputs if they are given in a dictionary
# =======================================================================
def parseInputs(self, **kw):
from Globals import G
G.MouldAssemblyList.append(self)
# =======================================================================
# the initialize method
# =======================================================================
def initialize(self):
self.mouldParent = None # the mould's to be assembled parent order
self.mouldToBeCreated = None # the mould to be assembled
MachineJobShop.initialize(self) # run default behaviour
# =======================================================================
# getEntity method that gets the entity from the giver
# it should run in a loop till it get's all the entities from the same order
# (with the flag componentsReadyForAssembly set)
# it is run only once, and receives all the entities to be assembled inside a while loop
# =======================================================================
def getEntity(self):
activeObject = self.getActiveObject()
giverObject = activeObject.getGiverObject()
# get the first entity from the predecessor
# TODO: each MachineJobShop.getEntity is invoked,
# the self.procTime is updated. Have to decide where to assign
# the processing time of the assembler
activeEntity=MachineJobShop.getEntity(self)
# this is kept so that in the next loop it will not try to re-get this Entity
firstObtained=activeEntity
# check weather the activeEntity is of type Mould
if activeEntity.type=='Mould':
# and return the mould received
return activeEntity
# otherwise, collect all the entities to be assembled
# read the number of basic and secondary components of the moulds
capacity = len(activeEntity.order.getAssemblyComponents())
# clear the active object queue
del activeObject.getActiveObjectQueue()[:]
# and set the capacity of the internal queue of the assembler
activeObject.updateCapacity(capacity)
# append the activeEntity to the activeObjectQueue
activeObjectQueue = activeObject.getActiveObjectQueue()
activeObjectQueue.append(activeEntity)
# loop through the basic/secondary components of the order that is currently obtained
# all the components are received at the same time
for entity in activeEntity.order.getAssemblyComponents():
# continue for the one that is already obtained before
if entity is firstObtained:
continue
self.entityToGet=entity
# get the next component
activeEntity=MachineJobShop.getEntity(self)
# check whether the activeEntity is of type Mould
try:
if activeEntity.type=='Mould':
# and return the mould received
raise AssembleMouldError('Having already received an orderComponent the assembler\
is not supposed to receive an object of type Mould')
# check if the last component received has the same parent order as the previous one
elif not (activeEntity.order is activeObjectQueue[1].order):
raise AssembleMouldError('The orderComponents received by the assembler must have the\
same parent order')
except AssembleMouldError as mouldError:
print 'Mould Assembly Error: {0}'.format(mouldError)
return False
# perform the assembly-action and return the assembled mould
activeEntity = activeObject.assemble()
return activeEntity
# =======================================================================
# method that updates the capacity according to the componentsList of the
# activeEntity's parent order
# =======================================================================
def updateCapacity(self,capacity):
activeObject = self.getActiveObject()
self.capacity = capacity
self.Res=simpy.Resource(self.env, self.capacity)
# =======================================================================
# assemble method that assembles the components together to a mould (order
# and returns the product of the assembly. Furthermore, it resets the capacity
# of the internal queue to 1
# =======================================================================
def assemble(self):
activeObject = self.getActiveObject()
# get the internal queue of the active core object
activeObjectQueue=activeObject.getActiveObjectQueue()
# assert that all the components are of the same parent order
for entity in activeObjectQueue:
assert entity.order==activeObjectQueue[0].order,\
'The components residing in the MouldAssembly internal queue\
are not of the same parent order!'
# if we have to create a new Entity (mould) this should be modified
# we need the new entity's route, priority, isCritical flag, etc.
self.mouldParent = activeObjectQueue[0].order
# assert that there is a parent order
assert self.mouldParent.type=='Order', 'the type of the assembled to be mould\' s parent is not correct'
# delete the contents of the internal queue
temp_activeObjectQueue=list(activeObjectQueue)
for element in temp_activeObjectQueue:
# update their schedule
element.schedule[-1]["exitTime"] = self.env.now
# remove the elements from the activeObjectQueue and reset the current station of the entity
activeObjectQueue.remove(element)
element.currentStation=None
del temp_activeObjectQueue[:]
# after assembling reset the capacity
activeObject.updateCapacity(1)
#if there is a mould to be assembled
try:
if self.mouldParent:
# find the component which is of type Mould
# there must be only one mould component
for entity in self.mouldParent.componentsList:
entityClass=entity.get('_class', None)
if entityClass=='Dream.Mould':
self.mouldToBeCreated=entity
break
# create the mould
self.createMould(self.mouldToBeCreated)
# check if there is a need for manual processing
self.checkForManualOperation(type='Processing',entity=self.mouldToBeCreated)
# check if there is a need for manual processing
self.checkForManualOperation(type='Setup',entity=self.mouldToBeCreated)
# set the created mould as WIP
import Globals
Globals.setWIP([self.mouldToBeCreated])
# read the activeObjectQueue again as it has been updated by the setWIP()
activeObjectQueue=activeObject.getActiveObjectQueue()
# reset attributes
self.mouldParent = None
self.mouldToBeCreated = None
# return the assembled mould
return activeObjectQueue[0]
else:
raise AssembleMouldError('There is no mould to be assembled')
except AssembleMouldError as mouldError:
print 'Mould Assembly Error: {0}'.format(mouldError)
# =======================================================================
# creates the mould
# =======================================================================
def createMould(self, component):
#read attributes from the json or from the orderToBeDecomposed
id=component.get('id', 'not found')
name=component.get('name', 'not found')
try:
# dummy variable that holds the routes of the jobs the route from the JSON file is a sequence of dictionaries
JSONRoute=component.get('route', [])
# variable that holds the argument used in the Job initiation hold None for each entry in the 'route' list
route = [x for x in JSONRoute] # copy JSONRoute
# assert that the assembler is in the moulds route and update the initial step of the mould's route
firstStep = route.pop(0)
assert (self.id in firstStep.get('stationIdsList',[])),\
'the assembler must be in the mould-to-be-created route\' initial step'
# normal processing operation
processingTime=firstStep['processingTime']
processingTime=self.getOperationTime(processingTime)
self.rng=RandomNumberGenerator(self, processingTime)
self.procTime=self.rng.generateNumber()
# update the activeObject's processing time according to the readings in the mould's route
processDistType=processingTime.keys()[0]
procTime=float(processingTime[processDistType].get('mean', 0))
processOpType=firstStep.get('operationType',{}).get('Processing','not found') # can be manual/automatic
# task_id
task_id = firstStep.get('task_id', None)
# sequence
sequence = firstStep.get('sequence', None)
# operator
operator = firstStep.get('operator', {})
# technology
technology = firstStep.get('technology', None)
# quantity
quantity = firstStep.get('quantity', None)
# setup operation
setupTime=firstStep.get('setupTime',None)
if setupTime:
setupTime=self.getOperationTime(setupTime)
self.stpRng=RandomNumberGenerator(self, setupTime)
# update the activeObject's processing time according to the readings in the mould's route
setupDistType=setupTime.keys()[0]
setTime=float(setupTime[setupDistType].get('mean', 0))
setupOpType=firstStep.get('operationType',{}).get('Setup','not found') # can be manual/automatic
# update the first step of the route with the activeObjects id as sole element of the stationIdsList
route.insert(0, {'stationIdsList':[str(self.id)],
'processingTime':{str(processDistType):{'mean':str(procTime)}},\
'setupTime':{str(setupDistType):{'mean':str(setupTime)}},
'operationType':{'Processing':processOpType,'Setup':setupOpType}})
else:
# update the first step of the route with the activeObjects id as sole element of the stationIdsList
route.insert(0, {'stationIdsList':[str(self.id)],
'processingTime':{str(processDistType):{'mean':str(procTime)}},
'operationType':{'Processing':processOpType}})
# if there is task_id then add it to the route
if task_id:
route[0]["task_id"] = task_id
# if there is sequence then add it to the route
if sequence:
route[0]["sequence"] = sequence
# if there is operator then add it to the route
if operator:
route[0]["operator"] = operator
# if there is technology then add it to the route
if technology:
route[0]["technology"] = technology
# if there is quantity then add it to the route
if quantity!=None:
route[0]["quantity"] = quantity
#Below it is to assign an exit if it was not assigned in JSON
#have to talk about it with NEX
exitAssigned=False
for element in route:
elementIds = element.get('stationIdsList',[])
for obj in G.ObjList:
for elementId in elementIds:
if obj.id==elementId and obj.type=='Exit':
exitAssigned=True
# assign an exit to the route of the mould
if not exitAssigned:
exitId=None
for obj in G.ObjList:
if obj.type=='Exit':
exitId=obj.id
break
if exitId:
route.append({'stationIdsList':[str(exitId)],'processingTime':{}})
# keep a reference of all extra properties passed to the job
extraPropertyDict = {}
for key, value in component.items():
if key not in ('_class', 'id'):
extraPropertyDict[key] = value
# create and initiate the OrderComponent
from Mould import Mould
M=Mould(id, name, route, \
priority=self.mouldParent.priority, \
order=self.mouldParent,\
dueDate=self.mouldParent.dueDate, \
orderDate=self.mouldParent.orderDate, \
extraPropertyDict=extraPropertyDict,\
isCritical=self.mouldParent.isCritical)
# update the mouldToBeCreated
self.mouldToBeCreated=M
G.JobList.append(M)
G.WipList.append(M)
G.EntityList.append(M)
G.MouldList.append(M)
#initialize the component
M.initialize()
except:
# added for testing
print 'the mould to be created', component.get('name', 'not found'), 'cannot be created', 'time', self.env.now
raise
class Failure(ObjectInterruption):
def __init__(self, id='',name='',victim=None, distribution=None, index=0, repairman=None, offshift=False,
deteriorationType='constant',**kw):
ObjectInterruption.__init__(self,id,name,victim=victim)
if distribution:
self.distType=distribution.get('distributionType','No') # the distribution that the failure duration follows
self.MTTF=distribution.get('MTTF',60) # the MTTF
self.MTTR=distribution.get('MTTR',5) # the MTTR
self.availability=distribution.get('availability',100) # the availability
else:
self.distType='No'
self.MTTF=60
self.MTTR=5
self.availability=100
self.name="F"+str(index)
self.repairman=repairman # the resource that may be needed to fix the failure
# if now resource is needed this will be "None"
self.type="Failure"
# shows how the time to failure is measured
# 'constant' means it counts not matter the state of the victim
# 'onShift' counts only if the victim is onShift
# 'working' counts only working time
self.deteriorationType=deteriorationType
if(self.distType=="Availability"):
# --------------------------------------------------------------
# the following are used if we have availability defined
# (as in plant) the erlang is a special case of Gamma.
# To model the Mu and sigma (that is given in plant)
# as alpha and beta for gamma you should do the following:
# beta=(sigma^2)/Mu
# alpha=Mu/beta
# --------------------------------------------------------------
self.AvailabilityMTTF=self.MTTR*(float(availability)/100)/(1-(float(availability)/100))
self.sigma=0.707106781185547*self.MTTR
self.theta=(pow(self.sigma,2))/float(self.MTTR)
self.beta=self.theta
self.alpha=(float(self.MTTR)/self.theta)
self.rngTTF=RandomNumberGenerator(self, "Exp")
self.rngTTF.avg=self.AvailabilityMTTF
self.rngTTR=RandomNumberGenerator(self, "Erlang")
self.rngTTR.alpha=self.alpha
self.rngTTR.beta=self.beta
else:
# --------------------------------------------------------------
# if the distribution is fixed
# --------------------------------------------------------------
self.rngTTF=RandomNumberGenerator(self, self.distType)
self.rngTTF.mean=self.MTTF
self.rngTTR=RandomNumberGenerator(self, self.distType)
self.rngTTR.mean=self.MTTR
# flag used to identify if the time between failures should be counted while the victim is off-shift
self.offshift=offshift
def initialize(self):
ObjectInterruption.initialize(self)
self.victimStartsProcess=self.env.event()
self.victimEndsProcess=self.env.event()
# =======================================================================
# The run method for the failure which has to served by a repairman
# =======================================================================
def run(self):
while 1:
# if the time that the victim is off-shift should not be counted
timeToFailure=self.rngTTF.generateNumber()
remainingTimeToFailure=timeToFailure
failureNotTriggered=True
# if time to failure counts not matter the state of the victim
if self.deteriorationType=='constant':
yield self.env.timeout(remainingTimeToFailure)
# if time to failure counts only in onShift time
elif self.deteriorationType=='onShift':
while failureNotTriggered:
timeRestartedCounting=self.env.now
self.isWaitingForVictimOffShift=True
self.expectedSignals['victimOffShift']=1
receivedEvent=yield self.env.timeout(remainingTimeToFailure) | self.victimOffShift
# the failure should receive a signal if there is a shift-off triggered
if self.victimOffShift in receivedEvent:
assert self.victim.onShift==False, 'shiftFailure cannot recalculate TTF if the victim is onShift'
self.victimOffShift=self.env.event()
remainingTimeToFailure=remainingTimeToFailure-(self.env.now-timeRestartedCounting)
# wait for the shift to start again
self.isWaitingForVictimOnShift=True
self.expectedSignals['victimOnShift']=1
yield self.victimOnShift
self.isWaitingForVictimOnShift=False
self.victimOnShift=self.env.event()
assert self.victim.onShift==True, 'the victim of shiftFailure must be onShift to continue counting the TTF'
else:
self.isWaitingForVictimOffShift=False
failureNotTriggered=False
# if time to failure counts only in working time
elif self.deteriorationType=='working':
# wait for victim to start process
self.expectedSignals['victimStartsProcess']=1
yield self.victimStartsProcess
self.victimStartsProcess=self.env.event()
while failureNotTriggered:
timeRestartedCounting=self.env.now
self.expectedSignals['victimEndsProcess']=1
# wait either for the failure or end of process
receivedEvent=yield self.env.timeout(remainingTimeToFailure) | self.victimEndsProcess
if self.victimEndsProcess in receivedEvent:
self.victimEndsProcess=self.env.event()
remainingTimeToFailure=remainingTimeToFailure-(self.env.now-timeRestartedCounting)
self.expectedSignals['victimStartsProcess']=1
yield self.victimStartsProcess
# wait for victim to start again processing
self.victimStartsProcess=self.env.event()
else:
failureNotTriggered=False
# interrupt the victim
self.interruptVictim() # interrupt the victim
self.victim.Up=False
self.victim.timeLastFailure=self.env.now
self.outputTrace(self.victim.name,"is down")
# update the failure time
failTime=self.env.now
if(self.repairman and self.repairman!="None"): # if the failure needs a resource to be fixed,
# the machine waits until the
# resource is available
with self.repairman.getResource().request() as request:
yield request
# update the time that the repair started
timeOperationStarted=self.env.now
self.repairman.timeLastOperationStarted=self.env.now
yield self.env.timeout(self.rngTTR.generateNumber()) # wait until the repairing process is over
self.victim.totalFailureTime+=self.env.now-failTime
self.reactivateVictim() # since repairing is over, the Machine is reactivated
self.victim.Up=True
self.outputTrace(self.victim.name,"is up")
self.repairman.totalWorkingTime+=self.env.now-timeOperationStarted
continue
yield self.env.timeout(self.rngTTR.generateNumber()) # wait until the repairing process is over
# add the failure
# if victim is off shift add only the fail time before the shift ended
if not self.victim.onShift and failTime < self.victim.timeLastShiftEnded:
self.victim.totalFailureTime+=self.victim.timeLastShiftEnded-failTime
# if the victim was off shift since the start of the failure add nothing
elif not self.victim.onShift and failTime >= self.victim.timeLastShiftEnded:
pass
# if victim was off shift in the start of the fail time, add on
elif self.victim.onShift and failTime < self.victim.timeLastShiftStarted:
self.victim.totalFailureTime+=self.env.now-self.victim.timeLastShiftStarted
# this can happen only if deteriorationType is constant
assert self.deteriorationType=='constant', 'object got failure while off-shift and deterioration type not constant'
else:
self.victim.totalFailureTime+=self.env.now-failTime
self.reactivateVictim() # since repairing is over, the Machine is reactivated
self.victim.Up=True
self.outputTrace(self.victim.name,"is up")
def main():
seed = int(input("Wprowadź Z: "))
generator = RandomNumberGenerator(seed)
taskNumber = int(input("Wprowadź liczbę zadań: "))
tasks = range(1, taskNumber + 1)
machineNumber = int(input("Wprowadź liczbę maszyn: "))
machines = range(1, machineNumber + 1)
Pi = [] #Permutacja po uszeregowaniu
P = [] # Macierz czas wykonania
Nr = [] # Lista zadań do wykonania
P_Copy = [] #Macierz czasów wykonania
Nr_Copy = [] # Lista zadań do wykonania
C = [] # Macierz czasów zakończenia zadań
S = [] # Macierz czasów trwania zadań
for i in range(1, taskNumber + 1):
Pi.append(i)
for i in range(0, taskNumber):
z = [None] * machineNumber
C.append(z)
for i in range(0, taskNumber):
x = [None] * machineNumber
S.append(x)
for i in range(0, taskNumber):
p = []
for j in range(0, machineNumber):
p.append(generator.nextInt(1, 29))
P.append(p)
P_Copy.append(p)
for i in range(1, taskNumber + 1):
Nr.append(i)
Nr_Copy.append(i)
print("\n")
print("Tabu Calculate:")
tabu_calculate(taskNumber, machineNumber, C, P, Pi, S)
print(f"Pi: {Pi}")
print(f"P: {P}")
print(f"C: {C}")
print(f"Cmax: {calculate_cmax(machineNumber,Pi,P)}")
tabu_time_start = datetime.datetime.now()
newPi = tabuSearch(taskNumber, machineNumber, P, Pi)
tabu_time_end = datetime.datetime.now() - tabu_time_start
newP = []
for i in range(0, taskNumber):
newP.append(P[newPi[i] - 1])
tabu_calculate(taskNumber, machineNumber, C, newP, newPi, S)
C, Cmax = calculate_neh(newP, taskNumber, machineNumber)
print(f"Tabu search czas: {tabu_time_end}")
print(f"Tabu search po sortowaniu: ")
print(f"Pi: {newPi}")
print(f"C: {C}")
print(f"Cmax: {Cmax}")
#lista wszystkich zadan na konkretnych maszynach
p_ij_neh = P
# permutacja zadan
pi_neh = Nr
p_kj = []
print("\n")
print("NEH:")
print("p", p_ij_neh)
print("Permutacj naturalna: ")
print("pi: ", pi_neh)
Cj, Cmax = calculate_neh(p_ij_neh, taskNumber, machineNumber)
print("C:", Cj)
print("Cmax:", Cmax)
neh_time_start = datetime.datetime.now()
p_kj = NEH(p_ij_neh.copy(), taskNumber, machineNumber)
neh_time_end = datetime.datetime.now() - neh_time_start
print(f"NEH czas: {neh_time_end}")
print("NEH po sortowaniu: ")
print("pkj: ", p_kj)
Cj, Cmax = calculate_neh(p_kj, taskNumber, machineNumber)
print("C:", Cj)
print("Cmax:", Cmax)
#lista wszystkich zadan na konkretnych maszynach
p_ij_johnson = P
# permutacja zadan
pi_johnson = Nr
# wyswietlenie rozwiazania po wykonaniu algorytmu optymalizacji
solution = []
print("\n")
print("Johnson:")
print(p_ij_johnson)
print("Permutacj naturalna: ")
print("pi: ", pi_johnson)
Cj, Cmax = calculate_johnson(p_ij_johnson, taskNumber, machineNumber)
print("C:", Cj)
print("Cmax:", Cmax)
for task in tasks:
solution.append([pi_johnson[task - 1], p_ij_johnson[task - 1]])
johson_time_start = datetime.datetime.now()
pi = Johnson(tasks, p_ij_johnson.copy())
johson_time_end = datetime.datetime.now() - johson_time_start
print(f"Johson czas: {johson_time_end}")
print("Johnson po sortowaniu: ")
print("pi: ", pi)
sort = {x: i for i, x in enumerate(pi)}
solution.sort(key=lambda x: sort[x[0]])
Cj, Cmax = calculate_johnson([row[1] for row in solution], taskNumber,
machineNumber)
print("C", Cj)
print("Cmax:", Cmax)
class MachineJobShop(Machine):
@staticmethod
def getProcessingTime(processingTime):
'''returns the processingTime dictionary updated'''
if not processingTime:
processingTime = { 'distributionType': 'Fixed',
'mean': 0, }
if processingTime['distributionType'] == 'Normal' and\
processingTime.get('max', None) is None:
processingTime['max'] = float(processingTime['mean']) + 5 * float(processingTime['stdev'])
return processingTime
@staticmethod
def getSetupTime(setupTime):
'''returns the setupTime dictionary updated'''
if not setupTime:
setupTime = { 'distributionType': 'Fixed',
'mean': 0, }
if setupTime['distributionType'] == 'Normal' and\
setupTime.get('max', None) is None:
setupTime['max'] = float(setupTime['mean']) + 5 * float(setupTime['stdev'])
return setupTime
@staticmethod
def getLoadTime(loadTime):
'''returns the loadTime dictionary updated'''
if not loadTime:
loadTime = { 'distributionType': 'Fixed',
'mean': 0, }
if loadTime['distributionType'] == 'Normal' and\
loadTime.get('max', None) is None:
loadTime['max'] = float(loadTime['mean']) + 5 * float(loadTime['stdev'])
return loadTime
# =======================================================================
# set all the objects in previous and next
# =======================================================================
def initialize(self):
from Globals import G
self.previous=G.ObjList
self.next=[]
Machine.initialize(self) #run default behaviour
# # =======================================================================
# # actions to be carried out when the processing of an Entity ends
# # =======================================================================
# def endProcessingActions(self):
# # set isProcessing to False
# self.isProcessing=False
# # add working time
# self.totalWorkingTime+=self.env.now-self.timeLastProcessingStarted
#
# # blocking starts
# self.isBlocked=True
# self.timeLastBlockageStarted=self.env.now
#
# activeObject=self.getActiveObject()
# activeObjectQueue=activeObject.Res.users
# activeEntity=activeObjectQueue[0]
# # self.printTrace(activeEntity.name,processEnd=activeObject.objName)
# # reset the variables used to handle the interruptions timing
# # self.timeRestartingProcessing=0
# self.breakTime=0
# # output to trace that the processing in the Machine self.objName ended
# try:
# activeObject.outputTrace(activeEntity.name,"ended processing in "+activeObject.objName)
# except IndexError:
# pass
#
# import Globals
# from Globals import G
# # the entity that just got processed is cold again it will get
# # hot again by the time it reaches the giver of the next machine
# # TODO: Not only Machines require time to process entities
# if activeEntity.family=='Job':
# # read the list of next stations for the entity in just finished processing
# nextObjectIds=activeEntity.remainingRoute[0].get('stationIdsList',[])
# nextObjects = []
# for nextObjectId in nextObjectIds:
# nextObject=Globals.findObjectById(nextObjectId)
# nextObjects.append(nextObject)
# successorsAreMachines=True
# for object in nextObjects:
# if not object in G.MachineList:
# successorsAreMachines=False
# break
# if not successorsAreMachines:
# activeObjectQueue[0].hot = False
# # the just processed entity is added to the list of entities
# # pending for the next processing
# G.pendingEntities.append(activeObjectQueue[0])
# # set the variable that flags an Entity is ready to be disposed
# activeObject.waitToDispose=True
# #do this so that if it is overtime working it is not counted as off-shift time
# if not activeObject.onShift:
# activeObject.timeLastShiftEnded=self.env.now
# # update the variables keeping track of Entity related attributes of the machine
# activeObject.timeLastEntityEnded=self.env.now # this holds the time that the last entity ended processing in Machine
# activeObject.nameLastEntityEnded=activeObject.currentEntity.name # this holds the name of the last entity that ended processing in Machine
# activeObject.completedJobs+=1 # Machine completed one more Job
# # reset flags
# self.shouldPreempt=False
# self.isProcessingInitialWIP=False
#
# # TODO: collapse that to Machine
# =======================================================================
# gets an entity from the predecessor that the predecessor index points to
# =======================================================================
def getEntity(self):
activeObject=self.getActiveObject()
activeEntity=Machine.getEntity(self) #run the default code
# read the processing/setup/load times from the corresponding remainingRoute entry
processingTime=activeEntity.remainingRoute[0].get('processingTime',{})
processingTime=self.getProcessingTime(processingTime)
self.rng=RandomNumberGenerator(self, **processingTime)
self.procTime=self.rng.generateNumber()
setupTime=activeEntity.remainingRoute[0].get('setupTime',{})
setupTime=self.getSetupTime(setupTime)
self.stpRng=RandomNumberGenerator(self, **setupTime)
removedStep = activeEntity.remainingRoute.pop(0) #remove data from the remaining route of the entity
return activeEntity
#===========================================================================
# update the next list of the object based on the activeEentity
#===========================================================================
def updateNext(self,entity=None):
activeObject = self.getActiveObject()
activeEntity=entity
# read the possible receivers - update the next list
import Globals
# XXX: in the case of MouldAssembler there is no next defined in the route of the entities that are received
# the position activeEntity.remainingRoute[1] is out of bound. the next should be updated by the remaining route of the entity to be assembled
if len(activeEntity.remainingRoute)>1:
nextObjectIds=activeEntity.remainingRoute[1].get('stationIdsList',[])
nextObjects = []
for nextObjectId in nextObjectIds:
nextObject = Globals.findObjectById(nextObjectId)
nextObjects.append(nextObject)
# update the next list of the object
for nextObject in nextObjects:
# append only if not already in the list
if nextObject not in activeObject.next:
activeObject.next.append(nextObject)
# =======================================================================
# calculates the processing time
# =======================================================================
def calculateProcessingTime(self):
# this is only for processing of the initial wip
if self.isProcessingInitialWIP:
# read the processing/setup/load times from the first entry of the full route
activeEntity=self.getActiveObjectQueue()[0]
processingTime=activeEntity.route[0].get('processingTime',{})
processingTime=self.getProcessingTime(processingTime)
self.rng=RandomNumberGenerator(self, **processingTime)
self.procTime=self.rng.generateNumber()
setupTime=activeEntity.route[0].get('setupTime',{})
setupTime=self.getSetupTime(setupTime)
self.stpRng=RandomNumberGenerator(self, **setupTime)
return self.procTime #this is the processing time for this unique entity
# =======================================================================
# checks if the Queue can accept an entity
# it checks also the next station of the Entity
# and returns true only if the active object is the next station
# =======================================================================
def canAccept(self, callerObject=None):
activeObjectQueue=self.Res.users
thecaller=callerObject
#return according to the state of the Queue
# also check if (if the machine is to be operated) there are available operators
if (self.operatorPool!='None' and (any(type=='Load' for type in self.multOperationTypeList))):
return self.operatorPool.checkIfResourceIsAvailable()\
and len(activeObjectQueue)<self.capacity\
and self.checkIfMachineIsUp()\
and self.isInRoute(thecaller)\
and not self.entryIsAssignedTo()
else:
return len(activeObjectQueue)<self.capacity\
and self.checkIfMachineIsUp()\
and self.isInRoute(thecaller)\
and not self.entryIsAssignedTo()
#===========================================================================
# method used to check whether the station is in the entity-to-be-received route
# TODO: consider giving the activeEntity as attribute
# TODO: consider the case when no caller is defined,
# postProcessing calls canAccept on next members with no arguments
#===========================================================================
def isInRoute(self, callerObject=None):
activeObjectQueue=self.Res.users
thecaller=callerObject
# if the caller is not defined then return True. We are only interested in checking whether
# the station can accept whatever entity from whichever giver
if not thecaller:
return True
#check it the caller object holds an Entity that requests for current object
if len(thecaller.Res.users)>0:
# TODO: make sure that the first entity of the callerObject is to be disposed
activeEntity=thecaller.Res.users[0]
# if the machine's Id is in the list of the entity's next stations
if self.id in activeEntity.remainingRoute[0].get('stationIdsList',[]):
return True
return False
# =======================================================================
# checks if the Machine can dispose an entity.
# Returns True only to the potential receiver
# =======================================================================
def haveToDispose(self, callerObject=None):
activeObjectQueue=self.Res.users
thecaller=callerObject
#if we have only one successor just check if machine waits to dispose and also is up
# this is done to achieve better (cpu) processing time
if(callerObject==None):
return len(activeObjectQueue)>0\
and self.waitToDispose\
and self.checkIfActive()\
#return True if the Machine in the state of disposing and the caller is the receiver
return len(activeObjectQueue)>0\
and self.waitToDispose\
and self.checkIfActive()\
and (thecaller in self.next)\
and thecaller.isInRoute(self)
# =======================================================================
# method to execute preemption
# =======================================================================
def preempt(self):
# self.printTrace(self.id,preempted='')
activeEntity=self.Res.users[0] #get the active Entity
#calculate the remaining processing time
#if it is reset then set it as the original processing time
if self.resetOnPreemption:
remainingProcessingTime=self.procTime
#else subtract the time that passed since the entity entered
#(may need also failure time if there was. TO BE MELIORATED)
else:
remainingProcessingTime=self.procTime-(self.env.now-self.timeLastEntityEntered)
#update the remaining route of activeEntity
activeEntity.remainingRoute.insert(0, {'stationIdsList':[str(self.id)],\
'processingTime':\
{'distributionType':'Fixed',\
'mean':str(remainingProcessingTime)}})
activeEntity.remainingRoute.insert(0, {'stationIdsList':[str(self.lastGiver.id)],\
'processingTime':\
{'distributionType':'Fixed',\
'mean':'0'}})
#set the receiver as the object where the active entity was preempted from
self.receiver=self.lastGiver
self.next=[self.receiver]
self.waitToDispose=True #set that I have to dispose
self.receiver.timeLastEntityEnded=self.env.now #required to count blockage correctly in the preemptied station
# TODO: use a signal and wait for it, reactivation is not recognised as interruption
# reactivate(self)
if self.expectedSignals['preemptQueue']:
self.sendSignal(receiver=self, signal=self.preemptQueue)
# TODO: consider the case when a failure has the Station down. The event preempt will not be received now()
# but at a later simulation time.
#===========================================================================
# extend the default behaviour to check if whether the station
# is in the route of the entity to be received
#===========================================================================
def canAcceptAndIsRequested(self,callerObject):
giverObject=callerObject
assert giverObject, 'there must be a caller for canAcceptAndIsRequested'
if self.isInRoute(giverObject):
if Machine.canAcceptAndIsRequested(self,giverObject):
self.readLoadTime(giverObject)
return True
return False
#===========================================================================
# to be called by canAcceptAndIsRequested if it is to return True.
# the load timeof the Entity must be read
#===========================================================================
def readLoadTime(self,callerObject=None):
assert callerObject!=None, 'the caller of readLoadTime cannot be None'
thecaller=callerObject
thecaller.sortEntities()
activeEntity=thecaller.Res.users[0]
loadTime=activeEntity.remainingRoute[0].get('loadTime',{})
loadTime=self.getLoadTime(loadTime)
self.loadRng=RandomNumberGenerator(self, **loadTime)
# =======================================================================
# removes an entity from the Machine
# extension to remove possible receivers accordingly
# =======================================================================
def removeEntity(self, entity=None):
receiverObject=self.receiver
activeEntity=Machine.removeEntity(self, entity) #run the default method
removeReceiver=True
# search in the internalQ. If an entity has the same receiver do not remove
for ent in self.Res.users:
nextObjectIds=ent.remainingRoute[0].get('stationIdsList',[])
if receiverObject.id in nextObjectIds:
removeReceiver=False
# if not entity had the same receiver then the receiver will be removed
if removeReceiver:
self.next.remove(receiverObject)
return activeEntity
def createMould(self, component):
#read attributes from the json or from the orderToBeDecomposed
id = component.get('id', 'not found')
name = component.get('name', 'not found')
try:
# dummy variable that holds the routes of the jobs the route from the JSON file is a sequence of dictionaries
JSONRoute = component.get('route', [])
# variable that holds the argument used in the Job initiation hold None for each entry in the 'route' list
route = [x for x in JSONRoute] # copy JSONRoute
# assert that the assembler is in the moulds route and update the initial step of the mould's route
firstStep = route.pop(0)
assert (self.id in firstStep.get('stationIdsList',[])),\
'the assembler must be in the mould-to-be-created route\' initial step'
# normal processing operation
processingTime = firstStep['processingTime']
processingTime = self.getOperationTime(processingTime)
self.rng = RandomNumberGenerator(self, processingTime)
self.procTime = self.rng.generateNumber()
# update the activeObject's processing time according to the readings in the mould's route
processDistType = processingTime.keys()[0]
procTime = float(processingTime[processDistType].get('mean', 0))
processOpType = firstStep.get('operationType', {}).get(
'Processing', 'not found') # can be manual/automatic
# task_id
task_id = firstStep.get('task_id', None)
# sequence
sequence = firstStep.get('sequence', None)
# operator
operator = firstStep.get('operator', {})
# technology
technology = firstStep.get('technology', None)
# quantity
quantity = firstStep.get('quantity', None)
# setup operation
setupTime = firstStep.get('setupTime', None)
if setupTime:
setupTime = self.getOperationTime(setupTime)
self.stpRng = RandomNumberGenerator(self, setupTime)
# update the activeObject's processing time according to the readings in the mould's route
setupDistType = setupTime.keys()[0]
setTime = float(setupTime[setupDistType].get('mean', 0))
setupOpType = firstStep.get('operationType', {}).get(
'Setup', 'not found') # can be manual/automatic
# update the first step of the route with the activeObjects id as sole element of the stationIdsList
route.insert(0, {'stationIdsList':[str(self.id)],
'processingTime':{str(processDistType):{'mean':str(procTime)}},\
'setupTime':{str(setupDistType):{'mean':str(setupTime)}},
'operationType':{'Processing':processOpType,'Setup':setupOpType}})
else:
# update the first step of the route with the activeObjects id as sole element of the stationIdsList
route.insert(
0, {
'stationIdsList': [str(self.id)],
'processingTime': {
str(processDistType): {
'mean': str(procTime)
}
},
'operationType': {
'Processing': processOpType
}
})
# if there is task_id then add it to the route
if task_id:
route[0]["task_id"] = task_id
# if there is sequence then add it to the route
if sequence:
route[0]["sequence"] = sequence
# if there is operator then add it to the route
if operator:
route[0]["operator"] = operator
# if there is technology then add it to the route
if technology:
route[0]["technology"] = technology
# if there is quantity then add it to the route
if quantity != None:
route[0]["quantity"] = quantity
#Below it is to assign an exit if it was not assigned in JSON
#have to talk about it with NEX
exitAssigned = False
for element in route:
elementIds = element.get('stationIdsList', [])
for obj in G.ObjList:
for elementId in elementIds:
if obj.id == elementId and obj.type == 'Exit':
exitAssigned = True
# assign an exit to the route of the mould
if not exitAssigned:
exitId = None
for obj in G.ObjList:
if obj.type == 'Exit':
exitId = obj.id
break
if exitId:
route.append({
'stationIdsList': [str(exitId)],
'processingTime': {}
})
# keep a reference of all extra properties passed to the job
extraPropertyDict = {}
for key, value in component.items():
if key not in ('_class', 'id'):
extraPropertyDict[key] = value
# create and initiate the OrderComponent
from Mould import Mould
M=Mould(id, name, route, \
priority=self.mouldParent.priority, \
order=self.mouldParent,\
dueDate=self.mouldParent.dueDate, \
orderDate=self.mouldParent.orderDate, \
extraPropertyDict=extraPropertyDict,\
isCritical=self.mouldParent.isCritical)
# update the mouldToBeCreated
self.mouldToBeCreated = M
G.JobList.append(M)
G.WipList.append(M)
G.EntityList.append(M)
G.MouldList.append(M)
#initialize the component
M.initialize()
except:
# added for testing
print 'the mould to be created', component.get(
'name', 'not found'), 'cannot be created', 'time', self.env.now
raise
def createMould(self, component):
#read attributes from the json or from the orderToBeDecomposed
id=component.get('id', 'not found')
name=component.get('name', 'not found')
try:
# dummy variable that holds the routes of the jobs the route from the JSON file is a sequence of dictionaries
JSONRoute=component.get('route', [])
# variable that holds the argument used in the Job initiation hold None for each entry in the 'route' list
route = [x for x in JSONRoute] # copy JSONRoute
# assert that the assembler is in the moulds route and update the initial step of the mould's route
firstStep = route.pop(0)
assert (self.id in firstStep.get('stationIdsList',[])),\
'the assembler must be in the mould-to-be-created route\' initial step'
# normal processing operation
processingTime=firstStep['processingTime']
processingTime=self.getOperationTime(processingTime)
self.rng=RandomNumberGenerator(self, processingTime)
self.procTime=self.rng.generateNumber()
# update the activeObject's processing time according to the readings in the mould's route
processDistType=processingTime.keys()[0]
procTime=float(processingTime[processDistType].get('mean', 0))
processOpType=firstStep.get('operationType',{}).get('Processing','not found') # can be manual/automatic
# task_id
task_id = firstStep.get('task_id', None)
# sequence
sequence = firstStep.get('sequence', None)
# operator
operator = firstStep.get('operator', {})
# technology
technology = firstStep.get('technology', None)
# quantity
quantity = firstStep.get('quantity', None)
# setup operation
setupTime=firstStep.get('setupTime',None)
if setupTime:
setupTime=self.getOperationTime(setupTime)
self.stpRng=RandomNumberGenerator(self, setupTime)
# update the activeObject's processing time according to the readings in the mould's route
setupDistType=setupTime.keys()[0]
setTime=float(setupTime[setupDistType].get('mean', 0))
setupOpType=firstStep.get('operationType',{}).get('Setup','not found') # can be manual/automatic
# update the first step of the route with the activeObjects id as sole element of the stationIdsList
route.insert(0, {'stationIdsList':[str(self.id)],
'processingTime':{str(processDistType):{'mean':str(procTime)}},\
'setupTime':{str(setupDistType):{'mean':str(setupTime)}},
'operationType':{'Processing':processOpType,'Setup':setupOpType}})
else:
# update the first step of the route with the activeObjects id as sole element of the stationIdsList
route.insert(0, {'stationIdsList':[str(self.id)],
'processingTime':{str(processDistType):{'mean':str(procTime)}},
'operationType':{'Processing':processOpType}})
# if there is task_id then add it to the route
if task_id:
route[0]["task_id"] = task_id
# if there is sequence then add it to the route
if sequence:
route[0]["sequence"] = sequence
# if there is operator then add it to the route
if operator:
route[0]["operator"] = operator
# if there is technology then add it to the route
if technology:
route[0]["technology"] = technology
# if there is quantity then add it to the route
if quantity!=None:
route[0]["quantity"] = quantity
#Below it is to assign an exit if it was not assigned in JSON
#have to talk about it with NEX
exitAssigned=False
for element in route:
elementIds = element.get('stationIdsList',[])
for obj in G.ObjList:
for elementId in elementIds:
if obj.id==elementId and obj.type=='Exit':
exitAssigned=True
# assign an exit to the route of the mould
if not exitAssigned:
exitId=None
for obj in G.ObjList:
if obj.type=='Exit':
exitId=obj.id
break
if exitId:
route.append({'stationIdsList':[str(exitId)],'processingTime':{}})
# keep a reference of all extra properties passed to the job
extraPropertyDict = {}
for key, value in component.items():
if key not in ('_class', 'id'):
extraPropertyDict[key] = value
# create and initiate the OrderComponent
from Mould import Mould
M=Mould(id, name, route, \
priority=self.mouldParent.priority, \
order=self.mouldParent,\
dueDate=self.mouldParent.dueDate, \
orderDate=self.mouldParent.orderDate, \
extraPropertyDict=extraPropertyDict,\
isCritical=self.mouldParent.isCritical)
# update the mouldToBeCreated
self.mouldToBeCreated=M
G.JobList.append(M)
G.WipList.append(M)
G.EntityList.append(M)
G.MouldList.append(M)
#initialize the component
M.initialize()
except:
# added for testing
print 'the mould to be created', component.get('name', 'not found'), 'cannot be created', 'time', self.env.now
raise
class Failure(ObjectInterruption):
def __init__(self, victim=None, distribution=None, index=0, repairman=None):
#Process.__init__(self)
ObjectInterruption.__init__(self,victim)
if distribution:
self.distType=distribution.get('distributionType','No') # the distribution that the failure duration follows
self.MTTF=distribution.get('MTTF',60) # the MTTF
self.MTTR=distribution.get('MTTR',5) # the MTTR
self.availability=distribution.get('availability',100) # the availability
else:
self.distType='No'
self.MTTF=60
self.MTTR=5
self.availability=100
self.name="F"+str(index)
self.repairman=repairman # the resource that may be needed to fix the failure
# if now resource is needed this will be "None"
self.type="Failure"
self.id=0
if(self.distType=="Availability"):
# --------------------------------------------------------------
# the following are used if we have availability defined
# (as in plant) the erlang is a special case of Gamma.
# To model the Mu and sigma (that is given in plant)
# as alpha and beta for gamma you should do the following:
# beta=(sigma^2)/Mu
# alpha=Mu/beta
# --------------------------------------------------------------
self.AvailabilityMTTF=self.MTTR*(float(availability)/100)/(1-(float(availability)/100))
self.sigma=0.707106781185547*self.MTTR
self.theta=(pow(self.sigma,2))/float(self.MTTR)
self.beta=self.theta
self.alpha=(float(self.MTTR)/self.theta)
self.rngTTF=RandomNumberGenerator(self, "Exp")
self.rngTTF.avg=self.AvailabilityMTTF
self.rngTTR=RandomNumberGenerator(self, "Erlang")
self.rngTTR.alpha=self.alpha
self.rngTTR.beta=self.beta
else:
# --------------------------------------------------------------
# if the distribution is fixed
# --------------------------------------------------------------
self.rngTTF=RandomNumberGenerator(self, self.distType)
self.rngTTF.mean=self.MTTF
self.rngTTR=RandomNumberGenerator(self, self.distType)
self.rngTTR.mean=self.MTTR
# =======================================================================
# The run method for the failure which has to served by a repairman
# =======================================================================
def run(self):
while 1:
yield hold,self,self.rngTTF.generateNumber() # wait until a failure happens
if(len(self.getVictimQueue())>0): # when a Machine gets failure
self.interruptVictim() # while in process it is interrupted
self.victim.Up=False
self.victim.timeLastFailure=now()
self.outputTrace("is down")
# update the failure time
failTime=now()
if(self.repairman and self.repairman!="None"): #if the failure needs a resource to be fixed, the machine waits until the
#resource is available
yield request,self,self.repairman.getResource()
# update the time that the repair started
timeOperationStarted=now()
self.repairman.timeLastOperationStarted=now()
yield hold,self,self.rngTTR.generateNumber() # wait until the repairing process is over
self.victim.totalFailureTime+=now()-failTime
if(len(self.getVictimQueue())>0):
self.reactivateVictim() # since repairing is over, the Machine is reactivated
self.victim.Up=True
self.outputTrace("is up")
if(self.repairman and self.repairman!="None"): #if a resource was used, it is now released
yield release,self,self.repairman.getResource()
self.repairman.totalWorkingTime+=now()-timeOperationStarted