def setupUi(self):
"""This function is used to set values in ui."""
# Set values of number and diameter from rebars_widget
self.NumberDiameter = self.rebars_widget.numberDiameter.text()
number_diameter_list = gettupleOfNumberDiameter(self.NumberDiameter)
number_diameter_list.extend(
[(0, 0) for _ in range(3 - len(number_diameter_list))]
)
self.form.number1.setValue(number_diameter_list[0][0])
self.form.diameter1.setText(str(number_diameter_list[0][1]) + " mm")
self.form.number2.setValue(number_diameter_list[1][0])
self.form.diameter2.setText(str(number_diameter_list[1][1]) + " mm")
self.form.number3.setValue(number_diameter_list[2][0])
self.form.diameter3.setText(str(number_diameter_list[2][1]) + " mm")
self.form.numberDiameter.setText(self.NumberDiameter)
self.connectSignalSlots()
def setupUi(self):
"""This function is used to set values in ui."""
try:
# Try to set values of number and diameter from rebars_widget
self.NumberDiameter = self.rebars_widget.numberDiameter.text()
number_diameter_list = gettupleOfNumberDiameter(self.NumberDiameter)
self.form.number1.setValue(number_diameter_list[0][0])
self.form.diameter1.setText(str(number_diameter_list[0][1]) + " mm")
self.form.number2.setValue(number_diameter_list[1][0])
self.form.diameter2.setText(str(number_diameter_list[1][1]) + " mm")
self.form.number3.setValue(number_diameter_list[2][0])
self.form.diameter3.setText(str(number_diameter_list[2][1]) + " mm")
self.form.numberDiameter.setText(self.NumberDiameter)
except:
pass
self.connectSignalSlots()
def editXDirRebars(
xdir_rebars_list,
l_cover_of_tie,
r_cover_of_tie,
t_cover_of_tie,
b_cover_of_tie,
dia_of_tie,
dia_of_main_rebars,
xdir_rebars_t_offset,
xdir_rebars_b_offset,
xdir_rebars_type,
xdir_hook_orientation,
xdir_hook_extension,
l_xdir_rebar_rounding,
xdir_rebars_number_diameter,
facename,
structure,
):
# Find parameters of selected face
FacePRM = getParametersOfFace(structure, facename)
facename_for_xdir_rebars = getFacenameforRebar(
"y-axis", facename, structure
)
# find list of tuples of number and diameter of xdir rebars
xdir_rebars_number_diameter_list = gettupleOfNumberDiameter(
xdir_rebars_number_diameter
)
xdir_rebars_number_diameter_list.reverse()
# Calculate spacing between xdir-rebars
xdir_span_length = (
FacePRM[0][0]
- l_cover_of_tie
- r_cover_of_tie
- 2 * dia_of_tie
- 2 * dia_of_main_rebars
)
req_space_for_xdir_rebars = sum(
x[0] * x[1] for x in xdir_rebars_number_diameter_list
)
xdir_rebars_number = sum(
number for number, _ in xdir_rebars_number_diameter_list
)
spacing_in_xdir_rebars = (xdir_span_length - req_space_for_xdir_rebars) / (
xdir_rebars_number + 1
)
# Set parameter values for Straight/LShape xdir_rebars
list_coverAlong = ["Right Side", "Left Side"]
if xdir_rebars_type == "StraightRebar":
r_cover = t_cover_of_tie + dia_of_tie
l_cover = b_cover_of_tie + dia_of_tie
rl_cover = [r_cover, l_cover]
index = 0
for i, coverAlong in enumerate(list_coverAlong):
for j, (number, dia) in enumerate(xdir_rebars_number_diameter_list):
if j == 0:
f_cover_of_xdir_rebars = (
r_cover_of_tie
+ dia_of_tie
+ dia_of_main_rebars
+ spacing_in_xdir_rebars
)
rear_cover_of_xdir_rebars = (
FacePRM[0][0]
- f_cover_of_xdir_rebars
- number * dia
- (number - 1) * spacing_in_xdir_rebars
)
editStraightRebar(
xdir_rebars_list[index],
f_cover_of_xdir_rebars,
(coverAlong, rl_cover[i]),
xdir_rebars_t_offset,
xdir_rebars_b_offset,
dia,
True,
number,
"Vertical",
structure,
facename_for_xdir_rebars,
)
xdir_rebars_list[index].OffsetEnd = (
rear_cover_of_xdir_rebars + dia / 2
)
f_cover_of_xdir_rebars += (
number * dia + number * spacing_in_xdir_rebars
)
index += 1
elif xdir_rebars_type == "LShapeRebar":
face_length = getParametersOfFace(structure, facename_for_xdir_rebars)[
0
][0]
l_rebar_orientation_cover_list = []
for i, (number, dia_of_rebars) in enumerate(
xdir_rebars_number_diameter_list
):
l_rebar_orientation_cover_list.append(
getLRebarOrientationLeftRightCover(
xdir_hook_orientation,
xdir_hook_extension,
"y-axis",
l_cover_of_tie,
r_cover_of_tie,
t_cover_of_tie,
b_cover_of_tie,
dia_of_tie,
dia_of_rebars,
l_xdir_rebar_rounding,
face_length,
)
)
list_orientation = l_rebar_orientation_cover_list[0]["list_orientation"]
l_cover_list = []
for l_rebar_orientation_cover in l_rebar_orientation_cover_list:
l_cover_list.append(l_rebar_orientation_cover["l_cover"])
r_cover_list = []
for l_rebar_orientation_cover in l_rebar_orientation_cover_list:
r_cover_list.append(l_rebar_orientation_cover["r_cover"])
index = 0
for i, orientation in enumerate(list_orientation):
for j, (number, dia) in enumerate(xdir_rebars_number_diameter_list):
if j == 0:
f_cover_of_xdir_rebars = (
r_cover_of_tie
+ dia_of_tie
+ dia_of_main_rebars
+ spacing_in_xdir_rebars
)
rear_cover_of_xdir_rebars = (
FacePRM[0][0]
- f_cover_of_xdir_rebars
- number * dia
- (number - 1) * spacing_in_xdir_rebars
)
editLShapeRebar(
xdir_rebars_list[index],
f_cover_of_xdir_rebars,
xdir_rebars_b_offset,
l_cover_list[j][i],
r_cover_list[j][i],
dia,
xdir_rebars_t_offset,
l_xdir_rebar_rounding,
True,
number,
orientation,
structure,
facename_for_xdir_rebars,
)
xdir_rebars_list[index].OffsetEnd = (
rear_cover_of_xdir_rebars + dia / 2
)
f_cover_of_xdir_rebars += (
number * dia + number * spacing_in_xdir_rebars
)
index += 1
FreeCAD.ActiveDocument.recompute()
def makeYDirRebars(
l_cover_of_tie,
r_cover_of_tie,
t_cover_of_tie,
b_cover_of_tie,
dia_of_tie,
dia_of_main_rebars,
ydir_rebars_t_offset,
ydir_rebars_b_offset,
ydir_rebars_type,
ydir_hook_orientation,
ydir_hook_extension,
l_ydir_rebar_rounding,
ydir_rebars_number_diameter,
facename,
structure,
):
"""Adds the rebars along y-direction to the structural column object."""
ydir_rebars = []
facename_for_ydir_rebars = getFacenameforRebar(
"x-axis", facename, structure
)
# Find parameters of selected face
FacePRM = getParametersOfFace(structure, facename)
# find list of tuples of number and diameter of ydir rebars
ydir_rebars_number_diameter_list = gettupleOfNumberDiameter(
ydir_rebars_number_diameter
)
# Calculate spacing between ydir-rebars
ydir_span_length = (
FacePRM[0][1]
- t_cover_of_tie
- b_cover_of_tie
- 2 * dia_of_tie
- 2 * dia_of_main_rebars
)
req_space_for_ydir_rebars = sum(
x[0] * x[1] for x in ydir_rebars_number_diameter_list
)
ydir_rebars_number = sum(
number for number, _ in ydir_rebars_number_diameter_list
)
spacing_in_ydir_rebars = (ydir_span_length - req_space_for_ydir_rebars) / (
ydir_rebars_number + 1
)
# Set parameter values for Straight/LShape ydir_rebars
list_coverAlong = ["Right Side", "Left Side"]
if ydir_rebars_type == "StraightRebar":
# Set parameter values for Straight ydir_rebars
r_cover = r_cover_of_tie + dia_of_tie
l_cover = l_cover_of_tie + dia_of_tie
rl_cover = [r_cover, l_cover]
# Create Straight rebars along y-direction
for i, coverAlong in enumerate(list_coverAlong):
for j, (number, dia) in enumerate(ydir_rebars_number_diameter_list):
if j == 0:
f_cover_of_ydir_rebars = (
b_cover_of_tie
+ dia_of_tie
+ dia_of_main_rebars
+ spacing_in_ydir_rebars
)
rear_cover_of_ydir_rebars = (
FacePRM[0][1]
- f_cover_of_ydir_rebars
- number * dia
- (number - 1) * spacing_in_ydir_rebars
)
ydir_rebars.append(
makeStraightRebar(
f_cover_of_ydir_rebars,
(coverAlong, rl_cover[i]),
ydir_rebars_t_offset,
ydir_rebars_b_offset,
dia,
True,
number,
"Vertical",
structure,
facename_for_ydir_rebars,
)
)
ydir_rebars[-1].OffsetEnd = rear_cover_of_ydir_rebars + dia / 2
f_cover_of_ydir_rebars += (
number * dia + number * spacing_in_ydir_rebars
)
elif ydir_rebars_type == "LShapeRebar":
face_length = getParametersOfFace(structure, facename_for_ydir_rebars)[
0
][0]
l_rebar_orientation_cover_list = []
for i, (number, dia_of_rebars) in enumerate(
ydir_rebars_number_diameter_list
):
l_rebar_orientation_cover_list.append(
getLRebarOrientationLeftRightCover(
ydir_hook_orientation,
ydir_hook_extension,
"x-axis",
l_cover_of_tie,
r_cover_of_tie,
t_cover_of_tie,
b_cover_of_tie,
dia_of_tie,
dia_of_rebars,
l_ydir_rebar_rounding,
face_length,
)
)
list_orientation = l_rebar_orientation_cover_list[0]["list_orientation"]
l_cover_list = []
for l_rebar_orientation_cover in l_rebar_orientation_cover_list:
l_cover_list.append(l_rebar_orientation_cover["l_cover"])
r_cover_list = []
for l_rebar_orientation_cover in l_rebar_orientation_cover_list:
r_cover_list.append(l_rebar_orientation_cover["r_cover"])
# Create LShape rebars along y-direction
for i, orientation in enumerate(list_orientation):
for j, (number, dia) in enumerate(ydir_rebars_number_diameter_list):
if j == 0:
f_cover_of_ydir_rebars = (
r_cover_of_tie
+ dia_of_tie
+ dia_of_main_rebars
+ spacing_in_ydir_rebars
)
rear_cover_of_ydir_rebars = (
FacePRM[0][1]
- f_cover_of_ydir_rebars
- number * dia
- (number - 1) * spacing_in_ydir_rebars
)
ydir_rebars.append(
makeLShapeRebar(
f_cover_of_ydir_rebars,
ydir_rebars_b_offset,
l_cover_list[j][i],
r_cover_list[j][i],
dia,
ydir_rebars_t_offset,
l_ydir_rebar_rounding,
True,
number,
orientation,
structure,
facename_for_ydir_rebars,
)
)
ydir_rebars[-1].OffsetEnd = rear_cover_of_ydir_rebars + dia / 2
f_cover_of_ydir_rebars += (
number * dia + number * spacing_in_ydir_rebars
)
FreeCAD.ActiveDocument.recompute()
return ydir_rebars