def standbyTimeout(self):
if config.usage.standby_to_shutdown_timer_blocktime.value:
curtime = localtime(time())
if curtime.tm_year > 1970: #check if the current time is valid
curtime = (curtime.tm_hour, curtime.tm_min, curtime.tm_sec)
begintime = tuple(
config.usage.standby_to_shutdown_timer_blocktime_begin.
value)
endtime = tuple(
config.usage.standby_to_shutdown_timer_blocktime_end.value)
if begintime <= endtime and (
curtime >= begintime
and curtime < endtime) or begintime > endtime and (
curtime >= begintime or curtime < endtime):
duration = (endtime[0] * 3600 + endtime[1] * 60) - (
curtime[0] * 3600 + curtime[1] * 60 + curtime[2])
if duration:
if duration < 0:
duration += 24 * 3600
self.standbyTimeoutTimer.startLongTimer(duration)
return
if self.session.screen["TunerInfo"].tuner_use_mask or mediafilesInUse(
self.session):
self.standbyTimeoutTimer.startLongTimer(600)
else:
from RecordTimer import RecordTimerEntry
RecordTimerEntry.TryQuitMainloop()
def finish(self, *args, **kwargs):
if self.showPendingServicesMessageShown:
self.msg.close()
print("[EPGRefresh] Debug: Refresh finished!")
if config.plugins.epgrefresh.enablemessage.value:
Notifications.AddPopup(_("EPG refresh finished."), MessageBox.TYPE_INFO, 4, ENDNOTIFICATIONID, domain = NOTIFICATIONDOMAIN)
epgrefreshtimer.cleanup()
self.maybeStopAdapter()
if config.plugins.epgrefresh.epgsave.value:
Notifications.AddPopup(_("EPG refresh save."), MessageBox.TYPE_INFO, 4, ENDNOTIFICATIONID, domain = NOTIFICATIONDOMAIN)
from enigma import eEPGCache
myEpg = None
myEpg = eEPGCache.getInstance()
myEpg.save()
# shutdown if we're supposed to go to standby and not recording
# forced scan --> manually started scan / non-forced scan --> automated scan
# dontshutdownonabort overrides the shutdown
if not self.forcedScan and config.plugins.epgrefresh.afterevent.value \
and not Screens.Standby.inTryQuitMainloop:
if (not config.plugins.epgrefresh.dontshutdownonabort.value and self.doStopRunningRefresh) or not self.doStopRunningRefresh:
self.forcedScan = False
if Screens.Standby.inStandby:
RecordTimerEntry.TryQuitMainloop()
else:
Notifications.AddNotificationWithID("Shutdown", Screens.Standby.TryQuitMainloop, 1, domain = NOTIFICATIONDOMAIN)
# reset doStopRunningRefresh here instead of cleanUp as it is needed to avoid shutdown
self.doStopRunningRefresh = False
self.forcedScan = False
self.isrunning = False
self._nextTodo()
def DoElektroSleep(self, retval):
config_NASenable = True if config.plugins.elektro.NASenable.value == config.plugins.elektro.profile.value else False
if config.plugins.elektro.profileShift.value == True:
config.plugins.elektro.profile.value = "1" if config.plugins.elektro.profile.value == "2" else "2"
config.plugins.elektro.profile.save()
self.setNextWakeuptime()
if (retval):
if not Standby.inTryQuitMainloop:
if config.plugins.elektro.NASenable.value == "true" or config_NASenable:
ret = NASpowerdown(config.plugins.elektro.NASname.value,
config.plugins.elektro.NASuser.value,
config.plugins.elektro.NASpass.value,
config.plugins.elektro.NAScommand.value,
config.plugins.elektro.NASport.value)
configfile.save()
if Standby.inStandby:
RecordTimerEntry.TryQuitMainloop()
else:
Notifications.AddNotificationWithID(
"Shutdown", Standby.TryQuitMainloop, 1)
else:
# Dont try to sleep until next wakeup
self.dontsleep = True
#Start the timer again
self.TimerSleep.startLongTimer(elektrostarttime)
def finish(self, *args, **kwargs):
if self.showPendingServicesMessageShown:
self.msg.close()
print("[EPGRefresh] Debug: Refresh finished!")
if config.plugins.epgrefresh.enablemessage.value:
Notifications.AddPopup(_("EPG refresh finished."), MessageBox.TYPE_INFO, 4, ENDNOTIFICATIONID, domain = NOTIFICATIONDOMAIN)
epgrefreshtimer.cleanup()
self.maybeStopAdapter()
if config.plugins.epgrefresh.epgsave.value:
Notifications.AddPopup(_("EPG refresh save."), MessageBox.TYPE_INFO, 4, ENDNOTIFICATIONID, domain = NOTIFICATIONDOMAIN)
from enigma import eEPGCache
myEpg = None
myEpg = eEPGCache.getInstance()
myEpg.save()
# shutdown if we're supposed to go to deepstandby and not recording
if not self.forcedScan and config.plugins.epgrefresh.afterevent.value \
and not Screens.Standby.inTryQuitMainloop:
self.forcedScan = False
if Screens.Standby.inStandby:
RecordTimerEntry.TryQuitMainloop()
else:
Notifications.AddNotificationWithID("Shutdown", Screens.Standby.TryQuitMainloop, 1, domain = NOTIFICATIONDOMAIN)
self.forcedScan = False
self.isrunning = False
self._nextTodo()
def doPowerOffAnswer(self, answer):
dont_currentday = time() > self.poweroff_time
if answer:
if not Standby.inTryQuitMainloop:
print "[PowerOffTimer] Goto auto shutdown box."
if Standby.inStandby:
RecordTimerEntry.TryQuitMainloop()
else:
Notifications.AddNotificationWithID("Shutdown", Standby.TryQuitMainloop, 1)
self.powerStateTimerChanged(dont_currentday=dont_currentday)
else:
print "[PowerOffTimer] Shutdown canceled by the user (dont_currentday=%s)" % dont_currentday
self.powerStateTimerChanged(dont_currentday=dont_currentday)
def finish(self, *args, **kwargs):
if not Screens.Standby.inStandby and not config.plugins.epgrefresh.background and config.plugins.epgrefresh.enablemessage.value:
Notifications.AddPopup(_("EPG refresh finished."),
MessageBox.TYPE_INFO, 4, NOTIFICATIONID)
self.forcedScan = False
epgrefreshtimer.cleanup()
self.maybeStopAdapter()
# shutdown if we're supposed to go to deepstandby and not recording
if not self.forcedScan and config.plugins.epgrefresh.afterevent.value \
and not Screens.Standby.inTryQuitMainloop:
if Screens.Standby.inStandby:
RecordTimerEntry.TryQuitMainloop()
else:
Notifications.AddNotificationWithID(
"Shutdown", Screens.Standby.TryQuitMainloop, 1)
def afterAuto(self):
if config.plugins.epgShare.afterAuto.value == 1:
#self.msgCallback("gehe in Standby")
colorprint("gehe in Standby")
Notifications.AddNotification(Screens.Standby.Standby)
elif config.plugins.epgShare.afterAuto.value == "2":
if not NavigationInstance.instance.RecordTimer.isRecording():
#self.msgCallback("gehe in Deep-Standby")
colorprint("gehe in Deep-Standby")
if Screens.Standby.inStandby:
RecordTimerEntry.TryQuitMainloop()
else:
Notifications.AddNotificationWithID(
"Shutdown", Screens.Standby.TryQuitMainloop, 1)
else:
#self.msgCallback("Eine laufenden Aufnahme verhindert den Deep-Standby")
colorprint(
"Eine laufenden Aufnahme verhindert den Deep-Standby")
def gotoDeepStandby(self, answer):
if answer:
if config.plugins.serienRec.afterAutocheck.value == "2":
if not NavigationInstance.instance.RecordTimer.isRecording():
for each in self.messageList:
Notifications.RemovePopup(each[3])
print "[SerienRecorder] gehe in Deep-Standby"
SRLogger.writeLog("gehe in Deep-Standby")
if Screens.Standby.inStandby:
from RecordTimer import RecordTimerEntry
RecordTimerEntry.TryQuitMainloop()
else:
Notifications.AddNotificationWithID("Shutdown", Screens.Standby.TryQuitMainloop, 1)
else:
print "[SerienRecorder] Eine laufende Aufnahme verhindert den Deep-Standby"
SRLogger.writeLog("Eine laufende Aufnahme verhindert den Deep-Standby")
else:
print "[SerienRecorder] gehe in Standby"
SRLogger.writeLog("gehe in Standby")
Notifications.AddNotification(Screens.Standby.Standby)
def check(self):
# Simulation ggf. stoppen
if self.timer.state > TimerEntry.StateWaiting and self.simulate_recordService:
self.stop_simulation()
# VPS wurde wieder deaktiviert oder Timer wurde beendet
if self.timer is None or self.timer.state == TimerEntry.StateEnded or self.timer.cancelled:
self.program_abort()
self.stop_simulation()
return -1
if self.timer.vpsplugin_enabled == False or config.plugins.vps.enabled.value == False:
if self.activated_auto_increase:
self.timer.autoincrease = False
self.program_abort()
self.stop_simulation()
return -1
self.nextExecution = 180
if config.plugins.vps.initial_time.value < 2 and self.timer.vpsplugin_overwrite:
initial_time = 120
else:
initial_time = config.plugins.vps.initial_time.value * 60
if self.timer.vpsplugin_overwrite == True:
if self.timer.state == TimerEntry.StateWaiting or self.timer.state == TimerEntry.StatePrepared:
# Startzeit verschieben
if (self.timer.begin - 60) < time():
if self.org_timer_begin == 0:
self.org_timer_begin = self.timer.begin
elif (self.org_timer_begin +
self.max_extending_timer) < time():
# Sendung begann immer noch nicht -> abbrechen
self.timer.abort()
self.session.nav.RecordTimer.doActivate(self.timer)
self.program_abort()
self.stop_simulation()
self.timer.log(
0,
"[VPS] abort timer, waited enough to find Event-ID"
)
return -1
self.timer.begin += 60
if (self.timer.end - self.timer.begin) < 300:
self.timer.end += 180
# auf Timer-Konflikt prüfen
timersanitycheck = TimerSanityCheck(
self.session.nav.RecordTimer.timer_list,
self.timer)
if not timersanitycheck.check():
self.timer.abort()
self.session.nav.RecordTimer.doActivate(self.timer)
self.program_abort()
self.stop_simulation()
self.timer.log(
0, "[VPS] abort timer due to TimerSanityCheck")
return -1
self.session.nav.RecordTimer.timeChanged(self.timer)
if 30 < self.nextExecution:
self.nextExecution = 30
# Programm starten
if not self.program_running:
if self.timer.state == TimerEntry.StateRunning:
self.program_start()
elif initial_time > 0:
if (self.timer.begin - initial_time) <= time():
self.program_start()
else:
n = self.timer.begin - initial_time - time()
if n < self.nextExecution:
self.nextExecution = n
if self.timer.state == TimerEntry.StateRunning:
if self.activated_auto_increase and self.org_timer_end != 0 and (
self.org_timer_end + (4 * 3600)) < time():
# Aufnahme läuft seit 4 Stunden im Autoincrease -> abbrechen
self.timer.autoincrease = False
self.activated_auto_increase = False
self.dont_restart_program = True
self.program_abort()
self.stop_simulation()
self.timer.log(0,
"[VPS] stop recording, too much autoincrease")
try:
if self.timer.vpsplugin_wasTimerWakeup:
self.timer.vpsplugin_wasTimerWakeup = False
if not Screens.Standby.inTryQuitMainloop:
RecordTimerEntry.TryQuitMainloop(False)
except:
pass
return self.nextExecution
def standbyTimeout(self):
from RecordTimer import RecordTimerEntry
RecordTimerEntry.TryQuitMainloop()
def standbyTimeout(self):
print "goto deep3"
from RecordTimer import RecordTimerEntry
RecordTimerEntry.TryQuitMainloop()
def activate(self):
next_state = self.state + 1
self.log(5, "activating state %d" % next_state)
if next_state == self.StatePrepared:
if self.tryPrepare():
self.log(6, "prepare ok, waiting for begin")
# create file to "reserve" the filename
# because another recording at the same time on another service can try to record the same event
# i.e. cable / sat.. then the second recording needs an own extension... when we create the file
# here than calculateFilename is happy
if not self.justplay:
open(self.Filename + ".ts", "w").close()
# fine. it worked, resources are allocated.
self.next_activation = self.begin
self.backoff = 0
return True
self.log(7, "prepare failed")
if self.first_try_prepare:
self.first_try_prepare = False
cur_ref = NavigationInstance.instance.getCurrentlyPlayingServiceReference(
)
if cur_ref and not cur_ref.getPath():
if not config.recording.asktozap.value:
self.log(8, "asking user to zap away")
if config.plugins.merlinEpgCenter.showTimerMessages.value:
self.session.openWithCallback(
self.failureCB,
MessageBox,
_("A timer failed to record!\nDisable TV and try again?\n"
),
timeout=20)
else: # zap without asking
self.log(9, "zap without asking")
if config.plugins.merlinEpgCenter.showTimerMessages.value:
self.session.open(
MessageBox,
_("In order to record a timer, the TV was switched to the recording service!\n"
),
type=MessageBox.TYPE_INFO,
timeout=config.merlin2.
timeout_message_channel_switch.value)
self.failureCB(True)
elif cur_ref:
self.log(
8,
"currently running service is not a live service.. so stop it makes no sense"
)
else:
self.log(
8,
"currently no service running... so we dont need to stop it"
)
return False
elif next_state == self.StateRunning:
# if this timer has been cancelled, just go to "end" state.
if self.cancelled:
return True
if self.justplay:
if Screens.Standby.inStandby:
self.log(11, "wakeup and zap")
#set service to zap after standby
Screens.Standby.inStandby.prev_running_service = self.service_ref.ref
#wakeup standby
Screens.Standby.inStandby.Power()
else:
self.log(11, "zapping")
NavigationInstance.instance.playService(
self.service_ref.ref)
return True
else:
self.log(11, "start recording")
record_res = self.record_service.start()
if record_res:
self.log(13, "start record returned %d" % record_res)
self.do_backoff()
# retry
self.begin = time() + self.backoff
return False
return True
elif next_state == self.StateEnded:
old_end = self.end
if self.setAutoincreaseEnd():
self.log(
12, "autoincrase recording %d minute(s)" % int(
(self.end - old_end) / 60))
self.state -= 1
return True
self.log(12, "stop recording")
if not self.justplay:
NavigationInstance.instance.stopRecordService(
self.record_service)
self.record_service = None
if self.afterEvent == AFTEREVENT.STANDBY:
if not Screens.Standby.inStandby and config.plugins.merlinEpgCenter.showTimerMessages.value: # not already in standby
self.session.openWithCallback(
self.sendStandbyNotification,
MessageBox,
_("A finished record timer wants to set your\nDreambox to standby. Do that now?"
),
timeout=20)
elif self.afterEvent == AFTEREVENT.DEEPSTANDBY:
if not Screens.Standby.inTryQuitMainloop: # not a shutdown messagebox is open
if Screens.Standby.inStandby: # in standby
RecordTimerEntry.TryQuitMainloop(
) # start shutdown handling without screen
elif config.plugins.merlinEpgCenter.showTimerMessages.value:
self.session.openWithCallback(
self.sendTryQuitMainloopNotification,
MessageBox,
_("A finished record timer wants to shut down\nyour Dreambox. Shutdown now?"
),
timeout=20)
return True
def finish(self, *args, **kwargs):
if self.showPendingServicesMessageShown:
self.msg.close()
print("[EPGRefresh] Debug: Refresh finished!")
if config.plugins.epgrefresh.enablemessage.value:
Notifications.AddPopup(_("EPG refresh finished."),
MessageBox.TYPE_INFO,
4,
ENDNOTIFICATIONID,
domain=NOTIFICATIONDOMAIN)
epgrefreshtimer.cleanup()
self.maybeStopAdapter()
if config.plugins.epgrefresh.epgsave.value:
Notifications.AddPopup(_("EPG refresh save."),
MessageBox.TYPE_INFO,
4,
ENDNOTIFICATIONID,
domain=NOTIFICATIONDOMAIN)
from enigma import eEPGCache
myEpg = None
myEpg = eEPGCache.getInstance()
myEpg.save()
force_auto_shutdown = self.session.nav.wasTimerWakeup() and \
config.plugins.epgrefresh.afterevent.value == "auto" and \
Screens.Standby.inStandby and config.misc.standbyCounter.value == 1 and \
config.misc.prev_wakeup_time.value == config.plugins.epgrefresh.wakeup_time.value
if not self.forcedScan:
# shutdown
if config.plugins.epgrefresh.afterevent.value == "standby" or force_auto_shutdown:
if not Screens.Standby.inTryQuitMainloop:
if (not config.plugins.epgrefresh.dontshutdownonabort.value
and self.doStopRunningRefresh
) or not self.doStopRunningRefresh:
self.forcedScan = False
if Screens.Standby.inStandby:
RecordTimerEntry.TryQuitMainloop()
else:
Notifications.AddNotificationWithCallback(
self.sendTryQuitMainloopNotification,
MessageBox,
_("EPGRefresh wants to shut down\nyour Dreambox. Shutdown now?"
),
timeout=10,
domain=NOTIFICATIONDOMAIN)
# idle
elif config.plugins.epgrefresh.afterevent.value == "idle":
if not Screens.Standby.inStandby:
Notifications.AddNotificationWithCallback(
self.sendStandbyNotification,
MessageBox,
_("EPGRefresh wants to set your\nDreambox to idle. Do that now?"
),
timeout=10,
domain=NOTIFICATIONDOMAIN)
self.doStopRunningRefresh = False
self.forcedScan = False
self.isrunning = False
self._nextTodo()
