def test_Create_DC(self):
'''
@summary: 创建一个数据中心
'''
dcapi = DataCenterAPIs()
LogPrint().info("Pre-Module-Test: Create DataCenter '%s'." %
self.dm.dc_name)
dcapi.createDataCenter(self.dm.dc_info)
def test_GetTemplateDiskList(self):
'''
@summary: 获取模板的磁盘列表
@note: 操作成功，验证返回状态码和返回信息
'''
self.flag = True
tempdisk_api = TemplateDisksAPIs()
LogPrint().info("Test: Get disk list of template %s." %
self.dm.temp_name)
r = tempdisk_api.getTemplateDiskList(self.dm.temp_name)
if r['status_code'] == self.dm.expected_status_code:
LogPrint().info("PASS: Get disk list of template %s SUCCESS." %
self.dm.temp_name)
else:
LogPrint().error("FAIL: The status_code is WRONG")
self.flag = False
self.assertTrue(self.flag)
def smart_start_volume(cluster_name, volume_name, status_code=200):
r = volumeapi.startGlusterVolume(cluster_name, volume_name)
if r['status_code'] == status_code:
def is_volume_up():
return volumeapi.getClusterVolumeStatus(cluster_name,
volume_name) == "up"
if wait_until(is_volume_up, 600, 5):
LogPrint().info("Start volume success.")
return True
else:
LogPrint().error("Start volume failed.Status is not UP.")
return False
else:
LogPrint().error("Status_code is WRONG.")
return False
def setUp(self):
self.dm = super(self.__class__, self).setUp()
self.diskapi = DiskAPIs()
#创建一个虚拟机
LogPrint().info("Pre-Test-1: Create vm %s for TC."% self.dm.vm_name)
self.assertTrue(smart_create_vm(self.dm.vm_name, self.dm.vm_info))
#创建一块磁盘
'''
@note: 创建磁盘时，磁盘的sharable属性必须为false，因为共享磁盘不作为模板的一部份
'''
LogPrint().info("Pre-Test-2: Create a disk for TC.")
r= smart_create_disk(self.dm.disk_info, self.dm.disk_name)
self.assertTrue(r[0])
self.disk_id = r[1]
#将该磁盘附加到虚拟机
LogPrint().info("Pre-Test-3: Attach disk %s to vm %s for TC."% (self.dm.disk_name
,self.dm.vm_name))
self.vmdiskapi = VmDiskAPIs()
r=self.vmdiskapi.attachDiskToVm(self.dm.vm_name, self.disk_id)
if r['status_code'] == 200:
LogPrint().info("Attach Disk to vm success.")
else:
LogPrint().error("Attach Disk to vm fail.Status-code is wrong.")
self.assertTrue(False)
#启动虚拟机
LogPrint().info("Pre-Test-4: Start vm for TC.")
self.assertTrue(smart_start_vm(self.dm.vm_name))
#激活磁盘
LogPrint().info("Pre-Test-5: Active vmdisk for TC.")
self.assertTrue(smart_active_vmdisk(self.dm.vm_name,self.disk_id))
def test_GetClustersList(self):
'''
@summary: 测试步骤
@note: （1）获取全部集群列表；
@note: （2）验证接口返回的状态码是否正确。
'''
clusterapi = ClusterAPIs()
LogPrint().info("Test: Get all clusters list.")
r = clusterapi.getClustersList()
if r['status_code'] == 200:
LogPrint().info('PASS: Get Clusters list SUCCESS.')
self.flag = True
else:
LogPrint().error(
'FAIL: Get Clusters list FAIL. Returned status code "%s" is WRONG.'
% r['status_code'])
self.flag = False
self.assertTrue(self.flag)
def test_DeleteProfile(self):
'''
@summary: 删除配置集
@note: 操作成功，验证返回状态码，验证配置集是否存在
'''
self.flag = True
LogPrint().info("Test: Delete profile %s."%self.dm.profile_name)
r = self.proapi.delProfile(self.dm.profile_name, self.nw_id)
if r['status_code'] == self.dm.expected_status_code:
if not self.proapi.isExist(self.dm.profile_name, self.nw_id):
LogPrint().info("PASS: Delete profile %s SUCCESS."%self.dm.profile_name)
else:
LogPrint().error("FAIL: Profile %s is still exist."%self.dm.profile_name)
self.flag = False
else:
LogPrint().error("FAIL: The returned status code is '%s', INCORRECT. " % r['status_code'])
self.flag = False
self.assertTrue(self.flag)
def setUp(self):
self.dm = super(self.__class__, self).setUp()
self.nwapi = NetworkAPIs()
'''
@note: 如果该数据中心内不存在网络，就创建一个网络
'''
LogPrint().info("Pre-Test: Create network %s."%self.dm.nw_name)
if not self.nwapi.searchNetworkByName(self.dm.nw_name)['result']['networks']:
self.nwapi.createNetwork(self.dm.nw_info)
def create_hosts(xml_host_info):
LogPrint().info(
"Pre-Module-Test-3: Create Host '%s' in Cluster '%s'." %
(xmltodict.parse(xml_host_info)['host']['name'],
xmltodict.parse(xml_host_info)['host']['cluster']['name']))
self.assertTrue(
smart_create_host(
xmltodict.parse(xml_host_info)['host']['name'],
xml_host_info))
def tearDown(self):
'''
@summary: 资源清理
@note: （1）删除创建的游离存储
'''
for sd_name in self.dm.data1_name:
LogPrint().info("Post-Test: Delete storage domain '%s'." % sd_name)
self.assertTrue(
smart_del_storage_domain(sd_name, self.dm.xml_del_sd_option))
def test_DeleteNetwork(self):
'''
@summary: 删除网络
@note: 操作成功，检查返回状态码，检查网络是否存在
'''
LogPrint().info("Test: Delete network %s."%self.dm.nw_name)
r = self.nwapi.delNetwork(self.dm.nw_name, self.dm.dc_name)
if r['status_code'] == self.dm.expected_status_code:
if not self.nwapi.isNetworkExist(self.dm.nw_name, self.dm.dc_name):
LogPrint().info("PASS: Delete network %s success."%self.dm.nw_name)
self.flag = True
else:
LogPrint().error("FAIL: Delete network fail.The network %s is still exist."%self.dm.nw_name)
self.flag = False
else:
LogPrint().error("FAIL: The returned status code is '%s', INCORRECT. " % r['status_code'])
self.flag = False
self.assertTrue(self.flag)
def create_clusters(xml_cluster_info):
LogPrint().info(
"Pre-Module-Test-2: Create Cluster '%s' in DataCenter '%s'." %
(xmltodict.parse(xml_cluster_info)['cluster']['name'],
xmltodict.parse(xml_cluster_info)['cluster']['data_center']
['name']))
self.assertTrue(
capi.createCluster(xml_cluster_info)['status_code'] ==
self.dm.expected_status_code_create_cluster)
def setUp(self):
self.dm = super(self.__class__, self).setUp()
LogPrint().info("Pre-Test-1: Create a template %s for TC." %
self.dm.temp_name)
self.assertTrue(
smart_create_template(self.dm.temp_name, self.dm.temp_info))
#为所在数据中心的ovirtmgmt网络创建一个配置集
LogPrint().info("Pre-Test-2: Create a profile %s for ovirtmgmt." %
self.dm.profile_name)
self.nw_id = NetworkAPIs().getNetworkIdByName('ovirtmgmt',
self.dm.dc_name)
print self.nw_id
r = ProfilesAPIs().createProfiles(self.dm.profile_info, self.nw_id)
if r['status_code'] == 201:
self.proid = r['result']['vnic_profile']['@id']
LogPrint().info("Create Profile SUCCESS.")
else:
LogPrint().error("Create Profile fail.The status_code is WRONG.")
def setUp(self):
'''
@summary: 测试用例执行前的环境初始化（前提）
'''
self.dm = super(self.__class__, self).setUp()
self.nwapi = NetworkAPIs()
#首先新建一个网络并获取其id
LogPrint().info("Pre-Test: Create a network %s for TC."%self.dm.nw_name)
self.nw_id = self.nwapi.createNetwork(self.dm.nw_info)['result']['network']['@id']
def tearDown(self):
'''
@summary: 资源清理
@note: （1）删除创建的磁盘；
'''
LogPrint().info("Post-Test: Delete disk '%s' from data storage '%s'." %
(self.dm.disk_name, self.dm.data1_name))
self.assertTrue(
smart_delete_disk(self.disk_id, self.dm.xml_del_disk_option))
def setUp(self):
'''
@summary: 初始化测试数据、测试环境。
'''
self.dm = super(self.__class__, self).setUp()
self.nwapi = NetworkAPIs()
#首先新建一个网络并获取其id
LogPrint().info("Pre-Test-1: Create a new network '%s'." % self.dm.nw_name)
self.nw_id = self.nwapi.createNetwork(self.dm.nw_info)['result']['network']['@id']
#为该网络创建多个配置集
LogPrint().info("Pre-Test-2: Create multi-profiles for network '%s'." % self.dm.nw_name)
self.proapi = ProfilesAPIs()
@BaseTestCase.drive_data(self, self.dm.profile_info)
def do_test(xml_info):
self.proapi.createProfiles(xml_info,self.nw_id)
do_test()
def tearDown(self):
'''
@summary: 资源清理
'''
LogPrint().info("Post-Test: Delete storage domain '%s'." %
self.dm.data_name)
self.assertTrue(
smart_del_storage_domain(self.dm.data_name,
self.dm.xml_del_sd_option))
def test_CreateProfile_DupName(self):
'''
@note: 操作失败，检查返回状态码和提示信息
'''
self.flag = True
LogPrint().info("Test: Create a dupname profile for network %s."% self.dm.nw_name)
r = self.proapi.createProfiles(self.dm.profile_info, self.nw_id)
if r['status_code'] == self.dm.expected_status_code:
dictCompare = DictCompare()
if dictCompare.isSubsetDict(r['result'], xmltodict.parse(self.dm.expected_info)):
LogPrint().info("PASS: The returned status code and messages are CORRECT when create dup profile.")
else:
LogPrint().error("FAIL: The returned messages are INCORRECCT when create dup profile.")
self.flag = False
else:
LogPrint().error("FAIL: The returned status code is '%s', INCORRECT. " % r['status_code'])
self.flag = False
self.assertTrue(self.flag)
def test_Scene(self):
'''
@summary: 测试场景描述
'''
#step1：创建一个distributed类型的卷
volumeapi = GlusterVolumeAPIs()
LogPrint().info("Create volume dis")
r = volumeapi.createGlusterVolume(self.dm.cluster_name,
self.dm.xml_volume_dis)
print r
if r['status_code'] == self.dm.expected_status_code_create_volume:
LogPrint().info("PASS:Create volume dis success.")
self.flag = True
else:
LogPrint().error("FAIL:Status_code is WRONG.")
self.flag = False
self.assertTrue(self.flag)
#step2：添加两个brick
volume_id = GlusterVolumeAPIs().getVolumeIdByName(
self.dm.cluster_name, 'dis')
r = volumeapi.addbrick(self.dm.cluster_id, volume_id,
self.dm.xml_brick_info)
if r['status_code'] == self.expected_status_code_add_brick:
LogPrint().info("PASS:ADD brick to volume dis success.")
self.flag = True
else:
LogPrint().error("FAIL:Status_code is WRONG.")
self.flag = False
self.assertTrue(self.flag)
#step3：启动卷
LogPrint().info("Start volume dis")
r = volumeapi.startGlusterVolume(self.dm.cluster_name, "dis")
if r['status_code'] == self.dm.expected_status_code_start_volume:
def is_volume_up():
return volumeapi.getClusterVolumeStatus(
self.dm.cluster_name, "dis") == "up"
if wait_until(is_volume_up, 600, 5):
LogPrint().info("PASS:Start volume dis success.")
self.flag = True
else:
LogPrint().error("FAIL:Start volume failed.Status is not UP.")
self.flag = False
else:
LogPrint().error("FAIL:Status_code is WRONG.")
self.flag = False
self.assertTrue(self.flag)
def test_DeleteDisk_AttachtoDownVm(self):
'''
@summary: 删除附加到运行虚拟机的磁盘
@note: 操作成功，验证返回状态码，验证磁盘是否存在
'''
diskapi = DiskAPIs()
self.flag = True
LogPrint().info("Test: Delete disk %s attached to down vm %s."% (self.dm.disk_name, self.dm.vm_name))
r = diskapi.deleteDisk(self.disk_id)
if r['status_code'] == self.dm.expected_status_code:
if not diskapi.isExist(self.disk_id):
LogPrint().info("PASS: Delete Disk attached to down vm SUCCESS." )
else:
LogPrint().error("FAIL: Disk is still exist. " )
self.flag = False
else:
LogPrint().error("FAIL: Returned status code is %s. "% r['status_code'])
self.flag = False
self.assertTrue(self.flag)
def test_DeleteDisk_AttachtoRunVm(self):
'''
@summary: 删除附加到运行虚拟机的磁盘
@note: 操作失败，验证返回状态码和报错信息
'''
self.flag = True
LogPrint().info("Test: Delete disk %s attached to running vm %s."% (self.dm.disk_name, self.dm.vm_name))
r = self.diskapi.deleteDisk(self.disk_id)
if r['status_code'] == self.dm.expected_status_code:
dictCompare = DictCompare()
if dictCompare.isSubsetDict(xmltodict.parse(self.dm.expected_info), r['result']):
LogPrint().info("PASS: The returned status code and messages are CORRECT.")
else:
LogPrint().error("FAIL: The returned messages are INCORRECT.")
self.flag = False
else:
LogPrint().error("FAIL: The returned status code is '%s' while it should be '%s'." % (r['status_code'], self.dm.expected_status_code))
self.flag = False
self.assertTrue(self.flag)
def test_DeleteDisk_AttachtoTemp(self):
'''
@summary: 删除附加到模板的磁盘
@note: 操作失败，验证返回验证码及报错信息
'''
self.flag = True
LogPrint().info("Test: Delete disk attached to template.")
r = DiskAPIs().deleteDisk(self.disk_id_temp)
if r['status_code'] == self.dm.expected_status_code:
dictCompare = DictCompare()
if dictCompare.isSubsetDict(xmltodict.parse(self.dm.expected_info), r['result']):
LogPrint().info("PASS: The returned status code and messages are CORRECT.")
else:
LogPrint().error("FAIL: The returned messages are INCORRECT.")
self.flag = False
else:
LogPrint().error("FAIL: The returned status code is '%s' while it should be '%s'." % (r['status_code'], self.dm.expected_status_code))
self.flag = False
self.assertTrue(self.flag)
def setUp(self):
'''
@summary: 测试用例执行前的环境初始化（前提）
'''
self.dm = super(self.__class__, self).setUp()
#首先新建一个磁盘并获取id
LogPrint().info("Pre-Test-1: Create Disk %s for TC."% self.dm.disk_name)
r = smart_create_disk(self.dm.disk_info,self.dm.disk_name)
self.disk_id = r[1]
self.assertTrue(r[0])
def test_GetClusterNetworkList(self):
'''
@summary: 测试用例执行步骤
@note: （1）获取集群的网络列表
@note: （2）操作成功，验证返回状态码
'''
clusterapi = ClusterAPIs()
LogPrint().info("Test: Get the cluster %s's network list. " %
self.dm.cluster_name)
r = clusterapi.getClusterNetworkList(self.dm.cluster_name)
if r['status_code'] == self.dm.status_code:
LogPrint().info('PASS: Get Cluster %s Network list SUCCESS.' %
self.dm.cluster_name)
self.flag = True
else:
LogPrint().error('FAIL: Get Cluster %s Network list FAIL.' %
self.dm.cluster_name)
self.flag = False
self.assertTrue(self.flag)
def setUp(self):
'''
@summary: 测试用例执行前的环境初始化（前提）
'''
# 初始化测试数据
self.dm = super(self.__class__, self).setUp()
self.nwapi = NetworkAPIs()
# 准备1：创建一个网络
LogPrint().info("Pre-Test: Create a network '%s' for this TC." % self.dm.nw_name)
self.assertTrue(smart_create_network(self.dm.nw_info,self.dm.nw_name))
def test_UpdateNetwork(self):
'''
@summary: 编辑配置集,更改所属网络
@note: 操作失败，验证返回状态码，验证报错信息
'''
self.flag = True
LogPrint().info("Test: Update profile %s.Change its network."%self.dm.profile_name)
r = self.proapi.updateProfile(self.dm.profile_name, self.nw_id, self.dm.update_info)
if r['status_code'] == self.dm.expected_status_code:
dictCompare = DictCompare()
if dictCompare.isSubsetDict(r['result'], xmltodict.parse(self.dm.expected_info)):
LogPrint().info("PASS: The returned status code and messages are CORRECT when update dup network.")
else:
LogPrint().error("FAIL: The returned messages are INCORRECCT when update dup network.")
self.flag = False
else:
LogPrint().error("FAIL: The returned status code is '%s', INCORRECT. " % r['status_code'])
self.flag = False
self.assertTrue(self.flag)
def test_CreateNetwork_DupVlan(self):
'''
@summary: 创建网络，vlan id重复
@note: 操作失败，检查返回状态码和报错信息
'''
LogPrint().info("Test: Create network %s.Set its vlan id 2."%self.dm.nw_name2)
r = self.nwapi.createNetwork(self.dm.nw_info2)
if r['status_code'] == self.dm.expected_status_code:
dictCompare = DictCompare()
if dictCompare.isSubsetDict(r['result'], xmltodict.parse(self.dm.expected_info)):
LogPrint().info("PASS: Returned status code and messages are CORRECT when create dup_vlan network.")
self.flag = True
else:
LogPrint().error("FAIL: Returned messages are INCORRECCT when create dup_vlan network.")
self.flag = False
else:
LogPrint().error("FAIL: Returned status code is '%s', INCORRECT. " % r['status_code'])
self.flag = False
self.assertTrue(self.flag)
def test_CreateDisk_VerifyName(self):
'''
@summary: 验证名称合法性：包含非法字符
@note: 操作失败，验证返回状态码及报错信息
'''
diskapi = DiskAPIs()
LogPrint().info("Test: Create disk and verify name.")
r = diskapi.createDisk(self.dm.disk_info)
if r['status_code'] == self.dm.expected_status_code:
dictCompare = DictCompare()
if dictCompare.isSubsetDict(xmltodict.parse(self.dm.expected_info), r['result']):
LogPrint().info("PASS: The returned status code and messages are CORRECT.")
else:
LogPrint().error("FAIL: The returned messages are INCORRECT.")
self.flag = False
else:
LogPrint().error("FAIL: The returned status code is '%s' while it should be '%s'." % (r['status_code'], self.dm.expected_status_code))
self.flag = False
self.assertTrue(self.flag)
def smart_delete_cluster(cluster_name,status_code=200):
'''
@summary: 删除集群
@param cluster_name:待删除的集群名称
@param status_code:删除集群返回的状态码，成功为200
@return: True/False
'''
cluster_api = ClusterAPIs()
try:
cluster_api.getClusterInfo(cluster_name)
r = cluster_api.delCluster(cluster_name)
if r ['status_code'] == status_code:
LogPrint().info("Post-Test:Delete Cluster '%s'success."%cluster_name)
return True
else:
LogPrint().error("Post-Test:Delete Cluster '%s' fail."%cluster_name)
return False
except:
LogPrint().info("Post-Test:Cluster '%s' is not exist"%cluster_name)
return True
def smart_delete_tempnic(temp_name, nic_name):
'''
@summary: 删除模板的网络接口
@param temp_name: 模板名称
@param nic_name:网络接口名称
@return: True or False
'''
tempnic_api = TemplateNicsAPIs()
try:
tempnic_api.getTemplateNicInfo(temp_name, nic_name)
r = tempnic_api.deleteTemplateNic(temp_name, nic_name)
if r['status_code'] == 200:
LogPrint().info("Post-Test:Delete template's nic success.")
return True
else:
LogPrint().error("Post-Test:Delete template's nic failed")
return False
except:
LogPrint().warning("WARN: Template_nic is not exist.")
return True
def test_GetDisksFromDataStorage(self):
'''
@summary: 测试步骤
@note: （1）调用相应接口，获取Data存储域中的disk列表；
@note: （2）操作成功，验证接口返回的状态码、disk列表是否正确。
'''
data_storage_api = DataStorageAPIs()
LogPrint().info("Test: Get disks list of Data Storage '%s'." %
self.dm.data1_name)
r = data_storage_api.getDisksListFromDataStorage(self.dm.data1_name)
if r['status_code'] == self.dm.expected_status_code_get_disk_list_in_data_storage:
LogPrint().info(
"PASS: Get the disks list from Data Storage '%s' SUCCESS." %
self.dm.data1_name)
self.flag = True
else:
LogPrint().error("FAIL: Returned status code '%s' INCORRECT." %
r['status_code'])
self.flag = False
self.assertTrue(self.flag)