def send(self, *args):
"""
Injects a packet into the network stack.
Args could be a tuple or two different values, or an high level packet. In each case the raw data and the meta
about the direction and interface to use are required.
If the packet is an highlevel packet, recalculates the checksum before sending.
The return value is the number of bytes actually sent.
The injected packet may be one received from receive(), or a modified version, or a completely new packet.
Injected packets can be captured and diverted again by other WinDivert handles with lower priorities.
The remapped function is DivertSend:
BOOL WinDivertSend(
__in HANDLE handle,
__in PVOID pPacket,
__in UINT packetLen,
__in PWINDIVERT_ADDRESS pAddr,
__out_opt UINT *sendLen
);
For more info on the C call visit: http://reqrypt.org/windivert-doc.html#divert_send
"""
data, address = self.__parse_send_args(*args)
send_len = c_int(0)
self._lib.WinDivertSend(self._handle, data, len(data), byref(address),
byref(send_len))
return send_len
def setup_console(self):
"""Initializes the screen frame buffer.
Swaps the current screen buffer with a
brand new created back buffer where the
characters can be written to the flicker-free
rectangular region.
"""
self._console = get_std_handle(STD_OUTPUT_HANDLE)
# could not get the standard
# console handle, raise an exception
if self._console == INVALID_HANDLE_VALUE:
raise TermInitializationError()
buffer_info = CONSOLE_SCREEN_BUFFER_INFO()
get_console_screen_buffer_info(self._console, byref(buffer_info))
get_console_cursor_info(self._console, byref(self._cursor_info))
self._cursor_info.visible = False
self._cols = buffer_info.size.x
self._rows = buffer_info.size.y
self._size = COORD(self._cols, self._rows)
self._rect = SMALL_RECT(0, 0, self._cols - 1, self._rows - 1)
self._char_buffer = (CHAR_INFO * (self._size.x * self._size.y))()
self._framebuffer = create_console_screen_buffer(
GENERIC_READ | GENERIC_WRITE, FILE_SHARE_READ | FILE_SHARE_WRITE,
None, CONSOLE_TEXTMODE_BUFFER, None)
if self._framebuffer == INVALID_HANDLE_VALUE:
raise TermInitializationError()
# hide the cursor and swap
# the console active screen buffer
set_console_cursor_info(self._framebuffer, byref(self._cursor_info))
set_console_active_screen_buffer(self._framebuffer)
def recv(self, bufsize=Defaults.PACKET_BUFFER_SIZE):
"""
Receives a diverted packet that matched the filter passed to the handle constructor.
The return value is a pair (raw_packet, meta) where raw_packet is the data read by the handle, and meta contains
the direction and interface indexes.
The received packet is guaranteed to match the filter.
The remapped function is WinDivertRecv:
BOOL WinDivertRecv(
__in HANDLE handle,
__out PVOID pPacket,
__in UINT packetLen,
__out_opt PWINDIVERT_ADDRESS pAddr,
__out_opt UINT *recvLen
);
For more info on the C call visit: http://reqrypt.org/windivert-doc.html#divert_recv
"""
packet = create_string_buffer(bufsize)
address = WinDivertAddress()
recv_len = c_int(0)
self._lib.WinDivertRecv(self._handle, packet, bufsize, byref(address),
byref(recv_len))
return packet[:recv_len.value], CapturedMetadata(
(address.IfIdx, address.SubIfIdx), address.Direction)
def hook(self):
def on_event(*args, **kwargs):
call_next = True
# noinspection PyBroadException
try:
self.handler(*args, **kwargs)
except BlockNextHookException:
call_next = False
except:
print_exception(*sys.exc_info())
finally:
if not call_next:
return 1
return _win32_CallNextHookEx(None, *args, **kwargs)
func = ctypes.CFUNCTYPE(ctypes.c_int, *self.signature)
pntr = func(on_event)
hmod = _win32_GetModuleHandleA(None)
self.hook_id = _win32_SetWindowsHookExA(self.event, pntr, hmod, 0)
atexit.register(self.unhook)
msg = wintypes.MSG()
while self.hook_id:
if self.polling:
_win32_PeekMessageW(None, 0, 0, 0, 0)
else:
_win32_GetMessageW(byref(msg), 0, 0, 0)
_win32_TranslateMessage(byref(msg))
_win32_DispatchMessageW(byref(msg))
def inet_ntop(address_family, packed_ip, encoding="UTF-8"):
addr = sockaddr()
addr.sa_family = address_family
addr_size = c_int(sizeof(addr))
ip_string = create_string_buffer(128)
ip_string_size = c_int(sizeof(addr))
if address_family == socket.AF_INET:
if len(packed_ip) != sizeof(addr.ipv4_addr):
raise socket.error('packed IP wrong length for inet_ntop')
memmove(addr.ipv4_addr, packed_ip, 4)
elif address_family == socket.AF_INET6:
if len(packed_ip) != sizeof(addr.ipv6_addr):
raise socket.error('packed IP wrong length for inet_ntop')
memmove(addr.ipv6_addr, packed_ip, 16)
else:
raise socket.error('unknown address family')
if WSAAddressToStringA(byref(addr),
addr_size,
None,
ip_string,
byref(ip_string_size)) != 0:
raise socket.error(FormatError())
return (ip_string[:ip_string_size.value - 1]).decode(encoding)
def c_multiplication(a, b):
class Collection(Structure):
_fields_ = [("size", c_int),
("data", (c_float * a.shape[1]) * a.shape[0])]
libmatmult = ctypes.CDLL("./multiply.so")
libmatmult.multiply.argtypes = [POINTER(Collection)]
libmatmult.multiply.restype = None
t_a = Collection()
t_b = Collection()
t_c = Collection()
for i in range(a.shape[0]):
for j in range(a.shape[1]):
t_a.data[i][j] = a[i][j]
t_c.data[i][j] = a[i][j]
for i in range(b.shape[0]):
for j in range(b.shape[1]):
t_b.data[i][j] = b[i][j]
start = time.time()
libmatmult.multiply(byref(t_a), byref(t_b), byref(t_c), a.shape[0],
a.shape[1])
end = time.time()
print(end - start)
c_result = np.ones(a.shape)
for i in range(a.shape[0]):
for j in range(a.shape[1]):
c_result = (t_c.data[i][j])
return c_result
def send(self, *args):
"""
Injects a packet into the network stack.
Args could be a tuple or two different values, or an high level packet. In each case the raw data and the meta
about the direction and interface to use are required.
If the packet is an highlevel packet, recalculates the checksum before sending.
The return value is the number of bytes actually sent.
The injected packet may be one received from receive(), or a modified version, or a completely new packet.
Injected packets can be captured and diverted again by other WinDivert handles with lower priorities.
The remapped function is DivertSend:
BOOL WinDivertSend(
__in HANDLE handle,
__in PVOID pPacket,
__in UINT packetLen,
__in PWINDIVERT_ADDRESS pAddr,
__out_opt UINT *sendLen
);
For more info on the C call visit: http://reqrypt.org/windivert-doc.html#divert_send
"""
data, address = self.__parse_send_args(*args)
send_len = c_int(0)
self._lib.WinDivertSend(self._handle, data, len(data), byref(address), byref(send_len))
return send_len
def _receive_async(self, callback=None, bufsize=Defaults.PACKET_BUFFER_SIZE):
"""
Receives a diverted packet that matched the filter passed to the handle constructor asynchronously.
The remapped function is WinDivertRecvEx:
BOOL WinDivertRecvEx(
__in HANDLE handle,
__out PVOID pPacket,
__in UINT packetLen,
__in UINT64 flags,
__out_opt PWINDIVERT_ADDRESS pAddr,
__out_opt UINT *recvLen,
__inout_opt LPOVERLAPPED lpOverlapped
);
For more info on the C call visit: http://reqrypt.org/windivert-doc.html#divert_recv_ex
"""
if not hasattr(self._lib, "WinDivertRecvEx"):
raise MethodUnsupportedException("Async receive is not supported with this version of WinDivert")
future = FuturePacket(self._handle, callback=callback, bufsize=bufsize)
retcode = self._lib.WinDivertRecvEx(self._handle, byref(future.packet), sizeof(future.packet), 0,
byref(future.address),
byref(future.recv_len),
byref(future.overlapped))
last_error = GetLastError()
if not retcode and last_error == ErrorCodes.ERROR_IO_PENDING:
return future.get_result()
else:
raise AsyncCallFailedException(
"Async receive failed with retcode %d and LastError %d" % (retcode, last_error))
def parse(self, text, scope=None):
"""Extract builtin entities from *text*
Args:
text (str): Input
scope (list of str, optional): List of builtin entity labels. If
defined, the parser will extract entities using the provided
scope instead of the entire scope of all available entities.
This allows to look for specifics builtin entity kinds.
Returns:
list of dict: The list of extracted entities
"""
if not isinstance(text, str):
raise TypeError("Expected language to be of type 'str' but found: "
"%s" % type(text))
if scope is not None:
if not all(isinstance(e, str) for e in scope):
raise TypeError(
"Expected scope to contain objects of type 'str'")
scope = [e.encode("utf8") for e in scope]
arr = CStringArray()
arr.size = c_int(len(scope))
arr.data = (c_char_p * len(scope))(*scope)
scope = byref(arr)
with string_pointer(c_char_p()) as ptr:
exit_code = lib.snips_nlu_ontology_extract_builtin_entities_json(
self._parser, text.encode("utf8"), scope, byref(ptr))
check_ffi_error(
exit_code, "Something went wrong when extracting "
"builtin entities")
result = string_at(ptr)
return json.loads(result.decode("utf8"))
def Init_Can(self, ZLG_Baud, Device_handle):
self.Baud = ZLG_Baud
self.ZLGDeviceHandle = Device_handle
print("ZLG baud:{0}".format(hex(self.Baud)))
print("ZLG device handle:{0}".format(self.ZLGDeviceHandle))
ZLG_USB_CAN_Info = VCI_BOARD_INFO()
ZLG_USB_CAN_Info_P = byref(ZLG_USB_CAN_Info)
self.ZLG_USB_CAN_Dll.ReadBoardInfo(self.ZLGDeviceHandle, 0,
ZLG_USB_CAN_Info_P) #read info
print("HW:%#x\n" % ZLG_USB_CAN_Info.hw_Version)
print("FW:%#x\n" % ZLG_USB_CAN_Info.fw_Version)
print("DR:%#x\n" % ZLG_USB_CAN_Info.dr_Version)
print("IN:%#x\n" % ZLG_USB_CAN_Info.in_Version)
print("IRQ:%#d\n" % ZLG_USB_CAN_Info.irq_Num)
print("CAN_NUM:%#d\n" % ZLG_USB_CAN_Info.can_Num)
print("STR_serial:%s\n" % ZLG_USB_CAN_Info.str_Serial_Num)
print("Str_Hw_NUM:%s\n" % ZLG_USB_CAN_Info.str_hw_Type)
ZLG_USB_CAN_INIT = VCI_INIT_CONFIG()
ZLG_USB_CAN_INIT.AccCode = 0x00000000
ZLG_USB_CAN_INIT.AccMaxk = 0x00FFFFFF
ZLG_USB_CAN_INIT.Mode = 0
ZLG_USB_CAN_INIT.Fiter = 1
ZLG_USB_CAN_INIT.Timing0 = 0
ZLG_USB_CAN_INIT.Timing1 = 0x1c
ZLG_USB_CAN_INIT_P = byref(ZLG_USB_CAN_INIT)
print(ZLG_USB_CAN_INIT.Mode)
print(type(self.Baud))
baud_value = ctypes.c_int32(self.Baud)
print("ZLG baud value:{0}".format((baud_value)))
set_can_reference = self.ZLG_USB_CAN_Dll.SetReference(
self.ZLGDeviceHandle, 0, 0, 0, ctypes.byref(baud_value))
if (set_can_reference == 1):
print("can set reference ok\r\n")
init_can = self.ZLG_USB_CAN_Dll.InitCAN(
self.ZLGDeviceHandle, 0, 0, ZLG_USB_CAN_INIT_P) #init can
if (init_can == 1):
self.set_can_state = 0
print("CAN init success\r\n")
ZLG_USB_CAN_FILTER = VCI_FILTER_RECORD()
if File_data.RES_ID & 0xFFFFF000 != 0: #扩展帧
ZLG_USB_CAN_FILTER.ExtFrame = 1
else:
ZLG_USB_CAN_FILTER.ExtFrame = 0
ZLG_USB_CAN_FILTER.Start = File_data.RES_ID
ZLG_USB_CAN_FILTER.End = File_data.RES_ID
ZLG_USB_CAN_FILTER_P = byref(ZLG_USB_CAN_FILTER)
set_fielter = self.ZLG_USB_CAN_Dll.SetReference(
self.ZLGDeviceHandle, 0, 0, 1, ZLG_USB_CAN_FILTER_P)
if set_fielter == 1:
print("set fielter success:{0}".format(File_data.RES_ID))
else:
pass
else:
print("CAN init error\r\n")
self.set_can_state = 1
else:
print("can set reference error\r\n")
self.set_can_state = 1
return self.set_can_state
def __or__(self, other: 'PyEnvironment') -> 'PyEnvironment':
assert isinstance(other, PyEnvironment)
d1 = DimChange()
d2 = DimChange()
environment = libapron.ap_environment_lce(self, other, byref(d1), byref(d2))
if not environment:
raise ValueError('incompatible environments')
return PyEnvironment(environment)
def login(self):
loginfo = NET_DEVICEINFO_Ex()
err = NET_DEVICEINFO_Ex()
self.userSession = self.nvrDll.CLIENT_LoginEx2(
c_char_p(self.nvrIp.encode('ascii')), self.nvrPort,
c_char_p(self.nvrLogin.encode('ascii')),
c_char_p(self.nvrPass.encode('ascii')), 0, None, byref(loginfo),
byref(err))
return self.userSession
def compute_all_ngrams(tokens, max_ngram_size):
with ngram_array_pointer(pointer(CNgramArray())) as ptr:
nb_tokens = len(tokens)
c_tokens = CStringArray()
c_tokens.data = (c_char_p * nb_tokens)(
*[token.encode("utf8") for token in tokens])
c_tokens.size = nb_tokens
exit_code = lib.snips_nlu_utils_compute_all_ngrams(
byref(c_tokens), max_ngram_size, byref(ptr))
check_ffi_error(
exit_code,
"Something went wrong when computing all ngrams for '%s'" % tokens)
array = ptr.contents
return array.to_pylist()
def inet_pton(address_family, ip_string, encoding="UTF-8"):
addr = sockaddr()
addr.sa_family = address_family
addr_size = c_int(sizeof(addr))
if WSAStringToAddressA(ip_string.encode(encoding), address_family, None,
byref(addr), byref(addr_size)) != 0:
raise socket.error(FormatError())
if address_family == socket.AF_INET:
return string_at(addr.ipv4_addr, 4)
if address_family == socket.AF_INET6:
return string_at(addr.ipv6_addr, 16)
raise socket.error('unknown address family')
def createNextCover(self,
name : str,
data : CoverData,
sourceinfo : SourceInfo) -> int:
sourceinfo_p = None if sourceinfo is None else byref(_LibSourceInfo.ctor(sourceinfo))
data_p = byref(LibCoverData.ctor(data))
index = get_lib().ucis_CreateNextCover(
self.db,
self.obj,
str.encode(name),
data_p,
sourceinfo_p)
return LibCoverIndex(self.db, self.obj, index)
def write(self, char_seq):
col = 0
index = 0
line_feed = False
for char in char_seq:
if char == '\n':
line_feed = True
col += 1
if col == self.cols:
col = 0
if line_feed:
line_feed = False
continue
if line_feed:
line_feed = False
blank_index = col
while blank_index <= self.cols:
self.char_buffer[blank_index - 1].char.unicode_char = ' '
blank_index += 1
index += 1
col = 0
continue
self.char_buffer[index].char.unicode_char = char
self.char_buffer[index].attributes = LIGHT_WHITE
index += 1
write_console_output(self.backbuffer_handle,
self.char_buffer,
self.size,
self.coord,
byref(self.rect))
def Receive_data(self):
return_data = []
return_len = 0
VCI_CAN_OBJ_Info = VCI_CAN_OBJ()
VCI_CAN_OBJ_Info.TimeStamp = 0
VCI_CAN_OBJ_Info.TimeFlag = 0
VCI_CAN_OBJ_Info.SendType = 0
VCI_CAN_OBJ_Info.RemoteFlag = 0
VCI_CAN_OBJ_Info.ExternFlag = 0
VCI_CAN_OBJ_Info.DataLen = 0
VCI_CAN_OBJ_Info_P = byref(VCI_CAN_OBJ_Info)
self.receive_frame_num = self.ZLG_USB_CAN_Dll.GetReceiveNum(
self.ZLGDeviceHandle, 0, 0)
if (self.receive_frame_num != 0):
ret_data = self.ZLG_USB_CAN_Dll.Receive(self.ZLGDeviceHandle, 0, 0,
VCI_CAN_OBJ_Info_P, 1, 0)
if ret_data != 0xFFFFFFFF:
self.Tx_conf = 0
return_len = VCI_CAN_OBJ_Info.DataLen
return_ID = VCI_CAN_OBJ_Info.Id
#if return_ID == 0x72e:
for i in (range(0, return_len)):
return_data.append(VCI_CAN_OBJ_Info.Data[i])
#print("receive ID:{0}".format(list(map(hex,return_data))))
else:
return_ID = None
else:
return_ID = None
return (return_ID, return_len, return_data)
def hide(self):
SetWindowPos(self.hwnd, 0, 0, 0, 0, 0, SWP_HIDEWINDOW)
data = APPBARDATA()
data.cbSize = ctypes.sizeof(APPBARDATA)
data.lParam = 1
SHAppBarMessage(ABM_SETSTATE, byref(data))
logging.info('Hide task bar.')
def vJoyFfbCap(self):
yes = c_bool()
ok = self._vjoy.vJoyFfbCap(byref(yes))
if ok:
return yes.value
else:
raise RuntimeError('Calling: vJoyFfbCap failed.')
def GetNumberExistingVJD(self):
n = c_int()
ok = self._vjoy.GetNumberExistingVJD(byref(n))
if ok:
return n.value
else:
return -1
def _send_async(self, *args):
"""
Injects a packet into the network stack.
The remapped function is WinDivertSendEx:
BOOL WinDivertSendEx(
__in HANDLE handle,
__in PVOID pPacket,
__in UINT packetLen,
__in UINT64 flags,
__in PWINDIVERT_ADDRESS pAddr,
__out_opt UINT *sendLen,
__inout_opt LPOVERLAPPED lpOverlapped
);
For more info on the C call visit: http://reqrypt.org/windivert-doc.html#divert_send_ex
"""
if not hasattr(self._lib, "WinDivertSendEx"):
raise MethodUnsupportedException("Async send is not supported with this version of WinDivert")
data, address = self.__parse_send_args(*args)
send_len = len(data)
retcode = self._lib.WinDivertSendEx(self._handle, data, send_len, 0, byref(address), None, None)
last_error = GetLastError()
if retcode and last_error == ErrorCodes.ERROR_IO_PENDING:
return True
else:
raise AsyncCallFailedException("Async send failed with retcode %d and LastError %d" % (retcode, last_error))
def GetvJoyMaxDevices(self):
n = c_int()
ok = self._vjoy.GetvJoyMaxDevices(byref(n))
if ok:
return n.value
else:
return -1
def _query_handle(self, handle, klass, object_info_type):
"""Gets the object handle info.
Parameters
----------
handle: HANDLE
handle object
klass: int
the class of information to query
object_info_type: Structure
structure type which holds the handle info
"""
buff = malloc(self._object_buff_size)
rlen = ULONG()
status = nt_query_object(handle, klass, buff, self._object_buff_size,
byref(rlen))
if status >= 0:
info = cast(buff, POINTER(object_info_type))
self._buffers.append(buff)
return info
else:
# reallocate the buffer size
# and try again
buff = realloc(buff, rlen.value)
status = nt_query_object(handle, klass, buff,
self._object_buff_size, None)
if status >= 0:
info = cast(buff, POINTER(object_info_type))
self._buffers.append(buff)
return info
else:
free(buff)
return None
def CheckCFAdc(xpin, minlim, maxlim):
try:
mypin = PinTuples.index(xpin)
retval = loadedll.GetColdFireAdc(mypin, byref(floatBufr))
myTxt = "dllCallexe = GetColdFireAdc(" + xpin + ",floatBufr)\n"
myTxt += "RValue = " + str(floatBufr.value) + "\n"
myTxt += "LowLimit = " + str(minlim) + "\n"
myTxt += "HighLimit = " + str(maxlim) + "\n"
myTxt += "StepType = NumericLimitTest\n"
myTxt += "Units = Volts\n"
if floatBufr.value < float(minlim) or floatBufr.value > float(maxlim):
myTxt += "RStatus = Fail\n"
else:
myTxt += "RStatus = PASS\n"
OUT_LIST.append([myTxt])
return retval
except Exception as e:
exc_type, exc_obj, exc_tb = sys.exc_info()
fname = os.path.split(exc_tb.tb_frame.f_code.co_filename)[1]
print("error = ", str(exc_type), ", ", fname, ", ",
str(exc_tb.tb_lineno), ", ", str(e), " in function ",
sys._getframe().f_code.co_name, "\n")
OUT_LIST.append([
"error = ",
str(exc_type), ", ", fname, ", ",
str(exc_tb.tb_lineno), ", ",
str(e), " in function ",
sys._getframe().f_code.co_name, "\n\n"
])
def _send_async(self, *args):
"""
Injects a packet into the network stack.
The remapped function is WinDivertSendEx:
BOOL WinDivertSendEx(
__in HANDLE handle,
__in PVOID pPacket,
__in UINT packetLen,
__in UINT64 flags,
__in PWINDIVERT_ADDRESS pAddr,
__out_opt UINT *sendLen,
__inout_opt LPOVERLAPPED lpOverlapped
);
For more info on the C call visit: http://reqrypt.org/windivert-doc.html#divert_send_ex
"""
if not hasattr(self._lib, "WinDivertSendEx"):
raise MethodUnsupportedException(
"Async send is not supported with this version of WinDivert")
data, address = self.__parse_send_args(*args)
send_len = len(data)
retcode = self._lib.WinDivertSendEx(self._handle, data, send_len, 0,
byref(address), None, None)
last_error = GetLastError()
if retcode and last_error == ErrorCodes.ERROR_IO_PENDING:
return True
else:
raise AsyncCallFailedException(
"Async send failed with retcode %d and LastError %d" %
(retcode, last_error))
def createScope(self,
name:str,
srcinfo:SourceInfo,
weight:int,
source,
type,
flags):
srcinfo_p = None if srcinfo is None else byref(_LibSourceInfo.ctor(srcinfo))
print("createScope: db=" + str(self.db) + " obj=" + str(self.obj) +
" name=" + str(name) + " srcinfo_p=" + str(srcinfo_p) +
" weight=" + str(weight) + "source=" + hex(source) + " type=" + hex(type) + " flags=" + hex(flags));
sh = get_lib().ucis_CreateScope(
self.db,
self.obj,
None if name is None else str.encode(name),
srcinfo_p,
weight,
source,
type,
flags)
if sh is None:
print("Error: createScope failed: parent=" + str(self.obj))
raise Exception("Failed to create scope")
return LibScope(self.db, sh)
def GetScannerDeviceType(x):
try:
retval = loadedll.GetScannerDeviceType(byref(intBufr1))
myTxt = "RValue = " + str(intBufr1.value) + "\n"
myTxt += "LowLimit = 7 \n"
myTxt += "HighLimit = 7 \n"
myTxt += "StepType = NumericLimitTest\n"
myTxt += "Units = retval\n"
if intBufr1.value == int(
x): #GEP2016 scanners return a Device Type of 7
myTxt += "RStatus = PASS\n"
else:
myTxt += "RStatus = Fail\n"
OUT_LIST.append([myTxt])
return retval
except Exception as e:
exc_type, exc_obj, exc_tb = sys.exc_info()
fname = os.path.split(exc_tb.tb_frame.f_code.co_filename)[1]
print("error = ", str(exc_type), ", ", fname, ", ",
str(exc_tb.tb_lineno), ", ", str(e), " in function ",
sys._getframe().f_code.co_name, "\n")
OUT_LIST.append([
"error = ",
str(exc_type), ", ", fname, ", ",
str(exc_tb.tb_lineno), ", ",
str(e), " in function ",
sys._getframe().f_code.co_name, "\n\n"
])
def get_result(self):
ready = False
while not ready:
iolen = DWORD()
if GetOverlappedResult(self.handle,
byref(self.overlapped),
byref(iolen),
False):
# print("%d Executing callback" % GetLastError())
if self.callback:
self.callback(self.packet[:iolen.value],
CapturedMetadata((self.address.IfIdx, self.address.SubIfIdx), self.address.Direction))
self.complete = True
ready = (GetLastError() != 996)
yield self
sleep(self.iodelay)
def CheckRealtimeClock(x):
try:
retval = loadedll.Get_RTC_Time_GEP(byref(uLongBufr))
time_now = time.time()
myTxt = "dllCallexe = Get_RTC_Time_GEP()\n"
time_diff = abs(time_now - int(uLongBufr.value))
myTxt += "RValue = " + str(time_diff) + "\n"
myTxt += "LowLimit = 0\n"
myTxt += "HighLimit = " + x + "\n"
myTxt += "StepType = NumericLimitTest\n"
myTxt += "Units = retval\n"
if time_diff <= int(x):
myTxt += "RStatus = PASS\n"
else:
myTxt += "RStatus = Fail\n"
OUT_LIST.append([myTxt])
return retval
except Exception as e:
exc_type, exc_obj, exc_tb = sys.exc_info()
fname = os.path.split(exc_tb.tb_frame.f_code.co_filename)[1]
print("error = ", str(exc_type), ", ", fname, ", ",
str(exc_tb.tb_lineno), ", ", str(e), " in function ",
sys._getframe().f_code.co_name, "\n")
OUT_LIST.append([
"error = ",
str(exc_type), ", ", fname, ", ",
str(exc_tb.tb_lineno), ", ",
str(e), " in function ",
sys._getframe().f_code.co_name, "\n\n"
])
def build(cls, language, gazetteer_entity_parser_path=None):
"""Build a `BuiltinEntityParser`
Args:
language (str): Language identifier
gazetteer_entity_parser_path (str, optional): Path to a gazetteer
entity parser. If None, the builtin entity parser will only
use grammar entities.
"""
if isinstance(gazetteer_entity_parser_path, Path):
gazetteer_entity_parser_path = str(gazetteer_entity_parser_path)
if not isinstance(language, str):
raise TypeError("Expected language to be of type 'str' but found:"
" %s" % type(language))
parser_config = dict(
language=language.upper(),
gazetteer_parser_path=gazetteer_entity_parser_path)
parser = pointer(c_void_p())
json_parser_config = bytes(json.dumps(parser_config), encoding="utf8")
exit_code = lib.snips_nlu_ontology_create_builtin_entity_parser(
byref(parser), json_parser_config)
check_ffi_error(
exit_code, "Something went wrong while creating the "
"builtin entity parser")
return cls(parser)
def CheckCanRxStatus(nTestValue):
try:
retval = loadedll.VcomReadCANRx(byref(sByteBufr))
OUT_LIST.append(["dllCallexe = VcomReadCANRx(sByteBufr)\n"])
myTxt = "RValue = " + str(sByteBufr.value) + "\n"
myTxt += "LowLimit = " + nTestValue + "\n"
myTxt += "HighLimit = " + nTestValue + "\n"
myTxt += "StepType = NumericLimitTest\n"
myTxt += "Units = retval\n"
if sByteBufr.value == c2int(nTestValue):
myTxt += "RStatus = PASS\n" # : CAN Rx value checks okay"
else:
myTxt += "RStatus = FAIL\n" # : CAN Rx value Failed"
OUT_LIST.append([myTxt])
return retval
except Exception as e:
exc_type, exc_obj, exc_tb = sys.exc_info()
fname = os.path.split(exc_tb.tb_frame.f_code.co_filename)[1]
print("error = ", str(exc_type), ", ", fname, ", ",
str(exc_tb.tb_lineno), ", ", str(e), " in function ",
sys._getframe().f_code.co_name, "\n")
OUT_LIST.append([
"error = ",
str(exc_type), ", ", fname, ", ",
str(exc_tb.tb_lineno), ", ",
str(e), " in function ",
sys._getframe().f_code.co_name, "\n\n"
])
def get_builtin_entity_examples(builtin_entity_kind, language):
"""Provides some examples of the builtin entity in the specified language
"""
global _ENTITIES_EXAMPLES
if not isinstance(builtin_entity_kind, str):
raise TypeError("Expected `builtin_entity_kind` to be of type 'str' "
"but found: %s" % type(builtin_entity_kind))
if not isinstance(language, str):
raise TypeError(
"Expected `language` to be of type 'str' but found: %s" %
type(language))
if builtin_entity_kind not in _ENTITIES_EXAMPLES:
_ENTITIES_EXAMPLES[builtin_entity_kind] = dict()
if language not in _ENTITIES_EXAMPLES[builtin_entity_kind]:
with string_array_pointer(pointer(CStringArray())) as ptr:
exit_code = lib.snips_nlu_ontology_builtin_entity_examples(
builtin_entity_kind.encode("utf8"), language.encode("utf8"),
byref(ptr))
check_ffi_error(
exit_code, "Something went wrong when retrieving "
"builtin entity examples")
array = ptr.contents
_ENTITIES_EXAMPLES[builtin_entity_kind][language] = list(
array.data[i].decode("utf8") for i in range(array.size))
return _ENTITIES_EXAMPLES[builtin_entity_kind][language]
def print_log(shader):
length = c_int()
glGetShaderiv(shader, GL_INFO_LOG_LENGTH, byref(length))
if length.value > 0:
log = create_string_buffer(length.value)
print(glGetShaderInfoLog(shader))
def getSourceInfo(self)->SourceInfo:
libsrcinfo = _LibSourceInfo()
sourceinfo_p = byref(libsrcinfo)
get_lib().ucis_GetScopeSourceInfo(self.db, self.obj, sourceinfo_p)
return LibSourceInfo.ctor(self.db, libsrcinfo)
def createInstance(self,
name : str,
fileinfo : SourceInfo,
weight : int,
source : SourceT,
type : ScopeTypeT,
du_scope : Scope,
flags : FlagsT):
fileinfo_p = None if fileinfo is None else byref(_LibSourceInfo.ctor(fileinfo))
sh = get_lib().ucis_CreateInstance(
self.db,
self.obj,
str.encode(name),
fileinfo_p,
weight,
source,
type,
du_scope.obj,
flags)
if sh is None:
print("Error: ucis_CreateInstance failed: du=" + str(du_scope) + " du.obj=" + str(du_scope.obj))
raise Exception("ucis_CreateInstance failed")
return LibScope(self.db, sh)
def show(self):
SetWindowPos(self.hwnd, 0, 0, 0, 0, 0, SWP_SHOWWINDOW)
data = APPBARDATA()
data.cbSize = ctypes.sizeof(APPBARDATA)
data.lParam = 0
SHAppBarMessage(ABM_SETSTATE, byref(data))
logging.info('Show task bar.')
def ReadFpgaRegister(wRegister):
try:
wRegister = c2int(wRegister, 16)
retval = loadedll.VcomGet1Reg(wRegister, byref(sByteBufr))
OUT_LIST.append(["dllCallexe = loadedll.VcomGet1Reg \n"])
OUT_LIST.append(["RValue = ", sByteBufr.value, "\n"])
OUT_LIST.append(["hex(wRegister) = ", hex(wRegister), "\n"])
OUT_LIST.append([
"binary(sByteBufr.value,pre='') = ",
binary(sByteBufr.value, pre=''), "\n"
])
return retval
except Exception as e:
exc_type, exc_obj, exc_tb = sys.exc_info()
fname = os.path.split(exc_tb.tb_frame.f_code.co_filename)[1]
print("error = ", str(exc_type), ", ", fname, ", ",
str(exc_tb.tb_lineno), ", ", str(e), " in function ",
sys._getframe().f_code.co_name, "\n")
OUT_LIST.append([
"error = ",
str(exc_type), ", ", fname, ", ",
str(exc_tb.tb_lineno), ", ",
str(e), " in function ",
sys._getframe().f_code.co_name, "\n\n"
])
def createCross(self, name: str, srcinfo: SourceInfo, weight: int,
source: SourceT,
points_l: List['Coverpoint']) -> CoverType:
srcinfo_p = None if srcinfo is None else byref(
_UcdbSourceInfo.ctor(srcinfo))
points = (c_void_p * len(points_l))()
for i, cp in enumerate(points_l):
points[i] = cp.obj
cr_o = get_lib().ucdb_CreateCross(self.db, self.obj, str.encode(name),
srcinfo_p, weight, source,
len(points_l), byref(points))
return UcdbCross(self.db, cr_o)
raise NotImplementedError()
def write_console(self, charseq):
"""Writes a string to a console frame buffer
beginning at the current cursor location.
charseq: str
the string to be written on the frame buffer
"""
write_console_unicode(self._framebuffer, charseq, len(charseq), byref(c_ulong()), None)
def find_devices(self):
self.devices = POINTER(pcap_if_t)()
self.errbuf= create_string_buffer(PCAP_ERRBUF_SIZE)
if (pcap_findalldevs(byref(self.devices ), self.errbuf) == -1):
msg = "Error in pcap_findalldevs: %s\n" % self.errbuf.value
print (msg)
logging.error(msg)
sys.exit(1)
def inet_pton(address_family, ip_string, encoding="UTF-8"):
addr = sockaddr()
addr.sa_family = address_family
addr_size = c_int(sizeof(addr))
if WSAStringToAddressA(ip_string.encode(encoding),
address_family,
None,
byref(addr),
byref(addr_size)) != 0:
raise socket.error(FormatError())
if address_family == socket.AF_INET:
return string_at(addr.ipv4_addr, 4)
if address_family == socket.AF_INET6:
return string_at(addr.ipv6_addr, 16)
raise socket.error('unknown address family')
def cls(self):
for y in range(self.rows):
for x in range(self.cols):
i = (y * self.cols) + x
self.char_buffer[i].char.unicode_char = ' '
write_console_output(self.backbuffer_handle,
self.char_buffer,
self.coord,
self.size,
byref(self.rect))
def create_shader(self, strings, shader_type):
count = len(strings)
# if we have no source code, ignore this shader
if count < 1:
return
# create the shader handle
shader = glCreateShader(shader_type)
shaderstrings = []
for string in strings:
shaderstrings.append(bytes(string, 'ascii'))
# convert the source strings into a ctypes pointer-to-char array, and
# upload them this is deep, dark, dangerous black magic - don't try
# stuff like this at home!
src = (c_char_p * count)(*shaderstrings)
glShaderSource(shader, count, cast(
pointer(src), POINTER(POINTER(c_char))), None)
# compile the shader
glCompileShader(shader)
temp = c_int(0)
# retrieve the compile status
glGetShaderiv(shader, GL_COMPILE_STATUS, byref(temp))
# if compilation failed, print the log
if not temp:
# retrieve the log length
glGetShaderiv(shader, GL_INFO_LOG_LENGTH, byref(temp))
# create a buffer for the log
buffer = create_string_buffer(temp.value)
# retrieve the log text
glGetShaderInfoLog(shader, temp, None, buffer)
# print the log to the console
print(buffer.value)
else:
# all is well, so attach the shader to the program
glAttachShader(self.handle, shader)
def link(self):
# link the program
glLinkProgram(self.handle)
temp = c_int(0)
# retrieve the link status
glGetProgramiv(self.handle, GL_LINK_STATUS, byref(temp))
# if linking failed, print the log
if not temp:
# retrieve the log length
glGetProgramiv(self.handle, GL_INFO_LOG_LENGTH, byref(temp))
# create a buffer for the log
buffer = create_string_buffer(temp.value)
# retrieve the log text
glGetProgramInfoLog(self.handle, temp, None, buffer)
# print the log to the console
print(buffer.value)
else:
# all is well, so we are linked
self.linked = True
def cls(self):
"""Clears the current screen buffer.
"""
for y in range(self._rows):
for x in range(self._cols):
i = (y * self._cols) + x
self._char_buffer[i].char.unicode_char = ' '
write_console_output(self._framebuffer,
self._char_buffer,
self._coord,
self._size,
byref(self._rect))
def emit(self, kevent, **kwargs):
"""Renders the kevent to the standard output stream.
Uses the default output format or JSON to render the
kernel event to standard output stream.
The default output format is as follows:
id timestamp cpu process (process id) - kevent (parameters)
-- --------- --- ------- ----------- ------- ------------
Example:
160 13:27:27.554 0 wmiprvse.exe (1012) - CloseFile (file=C:\\WINDOWS\\SYSTEM32\\RSAENH.DLL, tid=2668)
Parameters
----------
kevent: KEvent
the information regarding the kernel event
kwargs: dict
console adapter configuration
"""
if isinstance(kevent, dict):
kevt = json.dumps(kevent)
else:
pid, proc = kevent.get_thread()
if 'pretty' in self._fmt:
kevt = RENDER_FORMAT % (kevent.kid,
kevent.ts.time(),
kevent.cpuid,
proc,
pid,
kevent.name,
self._format_params(kevent.params))
else:
kevt = json.dumps(dict(id=kevent.kid,
timestamp=kevent.ts.strftime(self._timestamp_pattern),
cpuid=kevent.cpuid,
proc=proc,
pid=pid,
name=kevent.name,
params=kevent.params))
kevt += '\n'
# write the output on the standard output stream
write_console_unicode(self._stdout_handle, kevt,
len(kevt),
byref(c_ulong()),
None)
def query_handles(self, pid=None):
raw_handles = self._enum_handles(pid)
current_ps = HANDLE(get_current_process())
handles = []
# find the object handles for the process
for _, handle in raw_handles.items():
ps_handle = open_process(PROCESS_DUP_HANDLE,
False,
handle.pid)
if ps_handle:
handle_copy = HANDLE()
# to query the object handle
# we need to duplicate it in
# the address space of the current process
status = duplicate_handle(ps_handle,
handle.handle,
current_ps,
byref(handle_copy),
0, 0, 0)
if status != ERROR_SUCCESS:
# get the object type
handle_type = self._query_handle(handle_copy,
PUBLIC_OBJECT_TYPE_INFORMATION,
OBJECT_TYPE_INFORMATION)
if handle_type:
handle_type = cast(handle_type.contents.type_name.buffer, c_wchar_p) \
.value \
.upper().replace(' ', '_')
# query for object name
# (file names, registry keys,
# sections, ALPC ports, etc)
# check the access mask to make
# sure `NtQueryObject` won't hang
if handle_type in self._handle_types and \
handle.access_mask not in self._nasty_access_masks:
handle_name = self._query_handle(handle_copy,
PUBLIC_OBJECT_NAME_INFORMATION,
UNICODE_STRING)
if handle_name:
handle_name = cast(handle_name.contents.buffer, c_wchar_p).value
handle_info = HandleInfo(handle.handle,
handle.obj,
HandleType(HandleType.__getattr__(handle_type)),
handle_name,
handle.pid)
handles.append(handle_info)
close_handle(handle_copy)
close_handle(ps_handle)
return handles
def recv(self, bufsize=Defaults.PACKET_BUFFER_SIZE):
"""
Receives a diverted packet that matched the filter passed to the handle constructor.
The return value is a pair (raw_packet, meta) where raw_packet is the data read by the handle, and meta contains
the direction and interface indexes.
The received packet is guaranteed to match the filter.
The remapped function is WinDivertRecv:
BOOL WinDivertRecv(
__in HANDLE handle,
__out PVOID pPacket,
__in UINT packetLen,
__out_opt PWINDIVERT_ADDRESS pAddr,
__out_opt UINT *recvLen
);
For more info on the C call visit: http://reqrypt.org/windivert-doc.html#divert_recv
"""
packet = create_string_buffer(bufsize)
address = WinDivertAddress()
recv_len = c_int(0)
self._lib.WinDivertRecv(self._handle, packet, bufsize, byref(address), byref(recv_len))
return packet[: recv_len.value], CapturedMetadata((address.IfIdx, address.SubIfIdx), address.Direction)
def setup_console(self):
"""Initializes the screen frame buffer.
Swaps the current screen buffer with a
brand new created back buffer where the
characters can be written to the flicker-free
rectangular region.
"""
self._console = get_std_handle(STD_OUTPUT_HANDLE)
# could not get the standard
# console handle, raise an exception
if self._console == INVALID_HANDLE_VALUE:
raise TermInitializationError()
buffer_info = CONSOLE_SCREEN_BUFFER_INFO()
get_console_screen_buffer_info(self._console, byref(buffer_info))
get_console_cursor_info(self._console, byref(self._cursor_info))
self._cursor_info.visible = False
self._cols = buffer_info.size.x
self._rows = buffer_info.size.y
self._size = COORD(self._cols, self._rows)
self._rect = SMALL_RECT(0, 0, self._cols - 1, self._rows - 1)
self._char_buffer = (CHAR_INFO * (self._size.x * self._size.y))()
self._framebuffer = create_console_screen_buffer(GENERIC_READ | GENERIC_WRITE,
FILE_SHARE_READ | FILE_SHARE_WRITE,
None,
CONSOLE_TEXTMODE_BUFFER,
None)
if self._framebuffer == INVALID_HANDLE_VALUE:
raise TermInitializationError()
# hide the cursor and swap
# the console active screen buffer
set_console_cursor_info(self._framebuffer, byref(self._cursor_info))
set_console_active_screen_buffer(self._framebuffer)
def init_console(self):
self.console_handle = get_std_handle(STD_OUTPUT_HANDLE)
if self.console_handle == INVALID_HANDLE_VALUE:
raise TermInitializationError()
get_console_screen_buffer_info(self.console_handle, byref(self.backbuffer_info))
get_console_cursor_info(self.console_handle, byref(self.cursor_info))
self._show_cursor(False)
self.cols = self.backbuffer_info.size.x
self.rows = self.backbuffer_info.size.y
self.size = COORD(self.cols, self.rows)
self.rect = SMALL_RECT(0, 0, self.cols - 1, self.rows - 1)
self.char_buffer = (CHAR_INFO * (self.size.x * self.size.y))()
self.backbuffer_handle = create_console_screen_buffer(GENERIC_READ | GENERIC_WRITE,
FILE_SHARE_READ | FILE_SHARE_WRITE,
None,
CONSOLE_TEXTMODE_BUFFER,
None)
if self.backbuffer_handle == INVALID_HANDLE_VALUE:
raise TermInitializationError()
set_console_active_screen_buffer(self.backbuffer_handle)
def parse_ipv6_address(self, address):
"""
Parses an IPv6 address.
The function remapped is WinDivertHelperParseIPv6Address:
BOOL WinDivertHelperParseIPv6Address(
__in const char *addrStr,
__out_opt UINT32 *pAddr
);
For more info on the C call visit: http://reqrypt.org/windivert-doc.html#divert_help_parse_ipv6_address
"""
ip_addr = ARRAY(c_uint8, 16)()
self._lib.WinDivertHelperParseIPv6Address(address.encode(self.encoding), byref(ip_addr))
return ip_addr
def get_param(self, name):
"""
Gets a WinDivert parameter. See WinDivert DivertSetParam() for the list of parameters.
The remapped function is DivertGetParam:
BOOL WinDivertGetParam(
__in HANDLE handle,
__in WINDIVERT_PARAM param,
__out UINT64 *pValue
);
For more info on the C call visit: http://reqrypt.org/windivert-doc.html#divert_get_param
"""
value = c_uint64(0)
self._lib.WinDivertGetParam(self._handle, name, byref(value))
return value.value
def write_console(cls, charseq, new_line=True):
"""Outputs to a Windows console using UNICODE charset.
Parameters
----------
charseq: str
the sequence of characters to be written
new_line: bool
indicates if the output should be written on the new line
"""
if new_line:
charseq += '\n'
else:
charseq += '\r'
write_console_unicode(cls._stdout_handle, charseq, len(charseq), byref(c_ulong()), None)
def calc_checksums(self, packet, flags=0):
"""
(Re)calculates the checksum for any IPv4/ICMP/ICMPv6/TCP/UDP checksum present in the given packet.
Individual checksum calculations may be disabled via the appropriate flag.
Typically this function should be invoked on a modified packet before it is injected with send().
The function remapped is WinDivertHelperCalcChecksums:
UINT WinDivertHelperCalcChecksums(
__inout PVOID pPacket,
__in UINT packetLen,
__in UINT64 flags
);
For more info on the C call visit: http://reqrypt.org/windivert-doc.html#divert_helper_calc_checksums
"""
packet_len = len(packet)
buff = create_string_buffer(packet, packet_len)
self._lib.WinDivertHelperCalcChecksums(byref(buff), packet_len, flags)
return buff
def _query_handle(self, handle, klass, object_info_type):
"""Gets the object handle info.
Parameters
----------
handle: HANDLE
handle object
klass: int
the class of information to query
object_info_type: Structure
structure type which holds the handle info
"""
buff = malloc(self._object_buff_size)
rlen = ULONG()
status = nt_query_object(handle,
klass,
buff,
self._object_buff_size,
byref(rlen))
if status >= 0:
info = cast(buff, POINTER(object_info_type))
self._buffers.append(buff)
return info
else:
# reallocate the buffer size
# and try again
buff = realloc(buff, rlen.value)
status = nt_query_object(handle,
klass,
buff,
self._object_buff_size,
None)
if status >= 0:
info = cast(buff, POINTER(object_info_type))
self._buffers.append(buff)
return info
else:
free(buff)
return None
def parse_packet(self, *args):
"""
Parses a raw packet into a higher level object.
Args could be a tuple or two different values. In each case the first one is the raw data and the second
is the meta about the direction and interface to use.
The function remapped is WinDivertHelperParsePacket:
Parses a raw packet (e.g. from WinDivertRecv()) into the various packet headers
and/or payloads that may or may not be present.
BOOL WinDivertHelperParsePacket(
__in PVOID pPacket,
__in UINT packetLen,
__out_opt PWINDIVERT_IPHDR *ppIpHdr,
__out_opt PWINDIVERT_IPV6HDR *ppIpv6Hdr,
__out_opt PWINDIVERT_ICMPHDR *ppIcmpHdr,
__out_opt PWINDIVERT_ICMPV6HDR *ppIcmpv6Hdr,
__out_opt PWINDIVERT_TCPHDR *ppTcpHdr,
__out_opt PWINDIVERT_UDPHDR *ppUdpHdr,
__out_opt PVOID *ppData,
__out_opt UINT *pDataLen
);
For more info on the C call visit: http://reqrypt.org/windivert-doc.html#divert_helper_parse_packet
"""
if len(args) == 1:
# Maybe this is a poor way to check the type, but it should work
if hasattr(args[0], "__iter__") and not hasattr(args[0], "strip"):
raw_packet, meta = args[0]
else:
raw_packet, meta = args[0], None
elif len(args) == 2:
raw_packet, meta = args[0], args[1]
else:
raise ValueError("Wrong number of arguments passed to parse_packet")
packet_len = len(raw_packet)
# Consider everything else not part of headers as payload
# payload = ctypes.c_void_p(0)
payload_len = c_uint(0)
ip_hdr, ipv6_hdr = pointer(IpHeader()), pointer(Ipv6Header())
icmp_hdr, icmpv6_hdr = pointer(IcmpHeader()), pointer(Icmpv6Header())
tcp_hdr, udp_hdr = pointer(TcpHeader()), pointer(UdpHeader())
headers = (ip_hdr, ipv6_hdr, icmp_hdr, icmpv6_hdr, tcp_hdr, udp_hdr)
self._lib.WinDivertHelperParsePacket(
raw_packet,
packet_len,
byref(ip_hdr),
byref(ipv6_hdr),
byref(icmp_hdr),
byref(icmpv6_hdr),
byref(tcp_hdr),
byref(udp_hdr),
None,
byref(payload_len),
)
# headers_len = sum(ctypes.sizeof(hdr.contents) for hdr in headers if hdr)
# headers_len = sum((getattr(hdr.contents, "HdrLength", 0) * 4) for hdr in headers if hdr)
# clean headers, consider just those that are not None (!=NULL)
headers = [hdr.contents for hdr in headers if hdr]
headers_opts = []
offset = 0
for header in headers:
if hasattr(header, "HdrLength"):
header_len = getattr(header, "HdrLength", 0) * 4
opt_len = header_len - sizeof(header)
if opt_len:
opt = raw_packet[offset + header_len - opt_len : offset + header_len]
headers_opts.append(opt)
else:
headers_opts.append("")
else:
headers_opts.append("")
header_len = sizeof(header)
offset += header_len
return CapturedPacket(
payload=raw_packet[offset:],
raw_packet=raw_packet,
headers=[HeaderWrapper(hdr, opt, self.encoding) for hdr, opt in zip(headers, headers_opts)],
meta=meta,
encoding=self.encoding,
)
def _enum_handles(self, process_id=None):
"""Enumerates handle information.
Enumerates handle info on
the start of the kernel capture.
Returns a dictionary of handle's
information including the handle id,
access mask, and the process which owns
the handle.
"""
buff_size = MAX_BUFFER_SIZE
size = c_ulong()
# allocate the initial buffer
buff = malloc(buff_size)
handles = {}
while True:
status = zw_query_system_information(SYSTEM_HANDLE_INFORMATION_CLASS,
buff,
buff_size,
byref(size))
if status == STATUS_INFO_LENGTH_MISMATCH:
# the buffer is too small
# increment the buffer size and try again
buff_size += MAX_BUFFER_SIZE
elif status == STATUS_SUCCESS:
# cast the buffer to `SYSTEM_HANDLE_INFORMATION` struct
# which contains an array of `SYSTEM_HANDLE` structures
sys_handle_info = cast(buff, POINTER(SYSTEM_HANDLE_INFORMATION))
sys_handle_info = sys_handle_info.contents
handle_count = sys_handle_info.number_of_handles
# resize the array size to the
# actual number of file handles
sys_handles = (SYSTEM_HANDLE * buff_size).from_address(addressof(sys_handle_info.handles))
for i in range(handle_count):
sys_handle = sys_handles[i]
pid = sys_handle.process_id
handle = sys_handle.handle
obj = sys_handle.object
obj_type_index = sys_handle.object_type_number
access_mask = sys_handle.access_mask
if process_id and process_id == pid:
handles[obj] = ddict(pid=process_id,
handle=handle,
obj=obj,
access_mask=access_mask,
obj_type_index=obj_type_index)
elif process_id is None:
handles[obj] = ddict(pid=pid,
handle=handle,
obj=obj,
access_mask=access_mask,
obj_type_index=obj_type_index)
break
else:
raise HandleEnumError(status)
# reallocate the buffer
buff = realloc(buff, buff_size)
# free the buffer memory
free(buff)
return handles
def write_output(self, charseq, color=LIGHT_WHITE):
"""Writes character and color attribute data to the frame buffer.
The data to be written is taken from a correspondingly sized rectangular
block at a specified location in the source buffer.
Parameters
----------
charseq: str
the sequence of characters to be written on the frame buffer
color: int
the terminal output color
"""
col = 0
x = 0
crlf = False
if not charseq or len(charseq) <= 0:
return
try:
for char in charseq:
if char == '\n':
crlf = True
col += 1
# the last column has been reached.
# If there was a carriage return
# then stop the iteration
if col == self._cols:
col = 0
if crlf:
crlf = False
continue
if crlf:
crlf = False
space = col
# keep filling the rectangle with spaces
# until we reach the last column
while space <= self._cols:
self._char_buffer[space - 1].char.unicode_char = ' '
space += 1
x += 1
# reset the column and
# stop the current iteration
col = 0
continue
self._char_buffer[x].char.unicode_char = char
self._char_buffer[x].attributes = color
x += 1
except IndexError:
pass
# write the character attribute data
# to the screen buffer
write_console_output(self._framebuffer,
self._char_buffer,
self._size,
self._coord,
byref(self._rect))
def restore_console(self):
if self._console:
set_console_active_screen_buffer(self._console)
self._cursor_info.visible = True
set_console_cursor_info(self._console, byref(self._cursor_info))
def _show_cursor(self, visible=True):
self.cursor_info.visible = visible
set_console_cursor_info(self.console_handle, byref(self.cursor_info))