def fillTagValuesOpY (self, keyPath, tagValueList, operData):
initialListSize = tagValueList.getLen()
for logFunc in self._log("fill-tag-values-opy").debug3Func(): logFunc("called. operData=%s, keyPath=%s, initialListSize=%d", operData.debugStr(True), keyPath, initialListSize)
if operData.isOpYRequested() and operData.hasOpY():
valBegin = Value()
valBegin.setXmlBegin("op-y", "http://qwilt.com/model/oper", "oper")
tagValueList.push(("op-y", "http://qwilt.com/model/oper"), valBegin)
res = self.myOpY.fillTagValues(keyPath, tagValueList, operData.myOpY)
if res != ReturnCodes.kOk:
for logFunc in self._log("fill-tag-values-opy-my-internal-failed").errorFunc(): logFunc(
"myOpY->fillTagValues() failed. operData=%s, keyPath=%s, initialListSize=%d, tagValueList.getLen()=%d",
operData.debugStr(True), keyPath, initialListSize, tagValueList.getLen())
while tagValueList.getLen() > initialListSize:
tagValueList.pop()
return ReturnCodes.kGeneralError
if tagValueList.getLen() == (initialListSize+1):
# no values were added by opy - rollback the xmltag added
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd("op-y", "http://qwilt.com/model/oper", "oper")
tagValueList.push(("op-y", "http://qwilt.com/model/oper"), valEnd)
for logFunc in self._log("fill-tag-values-opy-ended").debug3Func(): logFunc("ended. operData=%s, keyPath=%s, initialListSize=%d, finalListSize=%d",
operData.debugStr(True), keyPath, initialListSize, tagValueList.getLen())
return ReturnCodes.kOk
def _fillReadTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.isEnabledRequested():
valEnabled = Value()
valEnabled.setEmpty()
tagValueList.push(("enabled", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valEnabled)
if self.controllerObj:
valBegin = Value()
(tag, ns, prefix) = ("controller" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line", "qtc-line")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.controllerObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-read-tag-values-controller-failed').errorFunc(): logFunc('controllerObj._fillReadTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
for key in self.instancess.keys():
if self.instancess[key]:
valBegin = Value()
(tag, ns, prefix) = ("instances", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-pre-topper", "qtc-pt")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
valKey = Value()
valKey.setString(key)
tagValueList.push(("instance", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-pre-topper"), valKey)
tagValueListLen = tagValueList.getLen()
res = self.instancess[key]._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-instances-failed').errorFunc(): logFunc('instances._fillWriteTagValues() failed. key=%s', key)
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def fillTagValues (self, keyPath, tagValueList, operData):
initialListSize = tagValueList.getLen()
for logFunc in self._log("fill-tag-values").debug3Func(): logFunc("called. operData=%s, keyPath=%s, initialListSize=%d", operData.debugStr(True), keyPath, initialListSize)
# fill tag values up to current
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = keyPath.getLen()
while i < self.myKeyPath.getLen():
valBegin = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
for logFunc in self._log("fill-tag-values-adding").debug3Func(): logFunc("adding xml begin. i=%d, valBegin=%s, self.myKeyPath.getLen()=%d", i, valBegin, self.myKeyPath.getLen())
i+=1
if operData.isOpValueDRequested() and operData.hasOpValueD():
val = Value()
val.setInt64(operData.opValueD)
tagValueList.push(("op-value-d", "http://qwilt.com/model/oper"), val)
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = self.myKeyPath.getLen() - 1
while i >= keyPath.getLen():
valEnd = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
i-=1
for logFunc in self._log("fill-tag-values-ended").debug3Func(): logFunc("ended. operData=%s, keyPath=%s, initialListSize=%d, finalListSize=%d",
operData.debugStr(True), keyPath, initialListSize, tagValueList.getLen())
return ReturnCodes.kOk
def _fillReadTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
for key in self.hosts.keys():
if self.hosts[key]:
valBegin = Value()
(tag, ns, prefix) = ("host", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system", "qt-sys")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
valKey = Value()
valKey.setString(key)
tagValueList.push(("hostname", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system"), valKey)
tagValueListLen = tagValueList.getLen()
res = self.hosts[key]._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-read-tag-values-host-failed').errorFunc(): logFunc('host._fillReadTagValues() failed. key=%s', key)
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillReadTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.isDefaultGatewayRequested():
valDefaultGateway = Value()
valDefaultGateway.setEmpty()
tagValueList.push(("default-gateway", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-interfaces"), valDefaultGateway)
if self.addressListObj:
valBegin = Value()
(tag, ns, prefix) = ("address" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-interfaces", "qt-if")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.addressListObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-read-tag-values-address-failed').errorFunc(): logFunc('addressListObj._fillReadTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def fillTagValues (self, keyPath, tagValueList, operData):
initialListSize = tagValueList.getLen()
for logFunc in self._log("fill-tag-values").debug3Func(): logFunc("called. operData=%s, keyPath=%s, initialListSize=%d", operData.debugStr(True), keyPath, initialListSize)
# fill tag values up to current
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = keyPath.getLen()
while i < self.myKeyPath.getLen():
valBegin = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
for logFunc in self._log("fill-tag-values-adding").debug3Func(): logFunc("adding xml begin. i=%d, valBegin=%s, self.myKeyPath.getLen()=%d", i, valBegin, self.myKeyPath.getLen())
i+=1
if operData.isActualDeliveryInterfaceRequested() and operData.hasActualDeliveryInterface():
val = Value()
val.setString(operData.actualDeliveryInterface)
tagValueList.push(("actual-delivery-interface", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-interfaces"), val)
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = self.myKeyPath.getLen() - 1
while i >= keyPath.getLen():
valEnd = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
i-=1
for logFunc in self._log("fill-tag-values-ended").debug3Func(): logFunc("ended. operData=%s, keyPath=%s, initialListSize=%d, finalListSize=%d",
operData.debugStr(True), keyPath, initialListSize, tagValueList.getLen())
return ReturnCodes.kOk
def _fillReadTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.isIgnoreRequested():
valIgnore = Value()
valIgnore.setEmpty()
tagValueList.push(("ignore", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content"), valIgnore)
if self.actionObj:
valBegin = Value()
(tag, ns, prefix) = ("action" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content", "qtc")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.actionObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-read-tag-values-action-failed').errorFunc(): logFunc('actionObj._fillReadTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillReadTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.isDefaultGatewayRequested():
valDefaultGateway = Value()
valDefaultGateway.setEmpty()
tagValueList.push(("default-gateway", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-interfaces"), valDefaultGateway)
if self.addressListObj:
valBegin = Value()
(tag, ns, prefix) = ("address" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-interfaces", "qt-if")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.addressListObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-read-tag-values-address-failed').errorFunc(): logFunc('addressListObj._fillReadTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def createSecToGroupTableEntry (self, trxContext, securityModel, securityName):
self._log("create-sec-to-group-table-entry").debug2("called. trxContext=%s, securityModel=%s, securityName=%s", trxContext, securityModel, securityName)
"""
create an entry with the securityName in SNMP-VIEW-BASED-ACM-MIB vacmSecurityToGroupTable vacmSecurityToGroupEntry
set vacmSecurityModel to securityModel
set vacmSecurityName to securityName
set vacmGroupName to notif-only
"""
self._log("create-sec-to-group-table-entry").debug2("called. trxContext=%s, securityModel=%s, securityName=%s", trxContext, securityModel, securityName)
targetKeyPath = KeyPath()
valVacm = Value()
(tag, ns, prefix) = ("SNMP-VIEW-BASED-ACM-MIB", "http://tail-f.com/ns/mibs/SNMP-VIEW-BASED-ACM-MIB/200210160000Z", "SNMP_VIEW_BASED_ACM_MIB")
valVacm.setXmlTag((tag, ns, prefix))
targetKeyPath.addKeyPathPostfix(valVacm)
tagValueList = TagValues()
valVacmSecToGroupTable = Value()
(tag, ns, prefix) = ("vacmSecurityToGroupTable", "http://tail-f.com/ns/mibs/SNMP-VIEW-BASED-ACM-MIB/200210160000Z", "SNMP_VIEW_BASED_ACM_MIB")
valVacmSecToGroupTable.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valVacmSecToGroupTable)
valBegin = Value()
(tag, ns, prefix) = ("vacmSecurityToGroupEntry", "http://tail-f.com/ns/mibs/SNMP-VIEW-BASED-ACM-MIB/200210160000Z", "SNMP_VIEW_BASED_ACM_MIB")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
valKeyModel = Value()
valKeyModel.setInt32(securityModel)
tagValueList.push(("vacmSecurityModel", "http://tail-f.com/ns/mibs/SNMP-VIEW-BASED-ACM-MIB/200210160000Z"), valKeyModel)
valKeySecName = Value()
valKeySecName.setString(securityName)
tagValueList.push(("vacmSecurityName", "http://tail-f.com/ns/mibs/SNMP-VIEW-BASED-ACM-MIB/200210160000Z"), valKeySecName)
# vacmGroupName to notif-only
valGroupName = Value()
valGroupName.setString(self.AC_NOTIF_ONLY)
tagValueList.push(("vacmGroupName", "http://tail-f.com/ns/mibs/SNMP-VIEW-BASED-ACM-MIB/200210160000Z"), valGroupName)
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
valTargetParamTable = Value()
(tag, ns, prefix) = ("vacmSecurityToGroupTable","http://tail-f.com/ns/mibs/SNMP-VIEW-BASED-ACM-MIB/200210160000Z", "SNMP_VIEW_BASED_ACM_MIB")
valTargetParamTable.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valTargetParamTable)
res = self._maapiDomain.writeMaapi(tagValueList, targetKeyPath, trxContext)
if res != ReturnCodes.kOk:
self._log('create-sec-to-group-table-entry-write-domain-failed').error('self._maapiDomain.writeMaapi() failed. PARAMS')
return ReturnCodes.kGeneralError
self._log("create-sec-to-group-table-entry-done").debug2("done. trxContext=%s, securityModel=%s, securityName=%s", trxContext, securityModel, securityName)
return ReturnCodes.kOk
def _fillReadTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
for key in self.configPs.keys():
if self.configPs[key]:
valBegin = Value()
(tag, ns, prefix) = ("config-p", "http://qwilt.com/model/oper", "oper")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
valKey = Value()
valKey.setInt64(key)
tagValueList.push(("id", "http://qwilt.com/model/oper"), valKey)
tagValueListLen = tagValueList.getLen()
res = self.configPs[key]._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-read-tag-values-configP-failed').errorFunc(): logFunc('configP._fillReadTagValues() failed. key=%s', key)
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.statusObj:
valBegin = Value()
(tag, ns, prefix) = (
"status",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-interfaces",
"qt-if")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.statusObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log(
'fill-write-tag-values-status-failed').errorFunc():
logFunc('statusObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
if self.interfaceListObj:
valBegin = Value()
(tag, ns, prefix) = (
"interface",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-interfaces",
"qt-if")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.interfaceListObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log(
'fill-write-tag-values-interface-failed').errorFunc():
logFunc(
'interfaceListObj._fillWriteTagValues() failed. PARAMS'
)
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillReadTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
for key in self.export_s.keys():
if self.export_s[key]:
valBegin = Value()
(tag, ns, prefix) = ("export", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-reporting", "qtc-report")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
valKey = Value()
valKey.setString(key)
tagValueList.push(("name", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-reporting"), valKey)
tagValueListLen = tagValueList.getLen()
res = self.export_s[key]._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-read-tag-values-export_-failed').errorFunc(): logFunc('export_._fillReadTagValues() failed. key=%s', key)
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillReadTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.isBestStudentRequested():
valBestStudent = Value()
valBestStudent.setEmpty()
tagValueList.push(("best-student", "http://qwilt.com/model/school-example"), valBestStudent)
if self.personListObj:
valBegin = Value()
(tag, ns, prefix) = ("people" , "http://qwilt.com/model/school-example", "sche")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.personListObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-read-tag-values-people-failed').errorFunc(): logFunc('personListObj._fillReadTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillReadTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.lllListObj:
valBegin = Value()
(tag, ns, prefix) = ("lll", "http://qwilt.com/model/benchmark",
"bnch")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.lllListObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log(
'fill-read-tag-values-lll-failed').errorFunc():
logFunc('lllListObj._fillReadTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
for key in self.kids.keys():
if self.kids[key]:
valBegin = Value()
(tag, ns, prefix) = ("kid", "http://qwilt.com/model/family", "family")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
valKey = Value()
valKey.setString(key)
tagValueList.push(("name", "http://qwilt.com/model/family"), valKey)
tagValueListLen = tagValueList.getLen()
res = self.kids[key]._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-kid-failed').errorFunc(): logFunc('kid._fillWriteTagValues() failed. key=%s', key)
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
for key in self.servers.keys():
if self.servers[key]:
valBegin = Value()
(tag, ns, prefix) = ("server", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system", "qt-sys")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
valKey = Value()
valKey.setIPv4(key)
tagValueList.push(("address", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system"), valKey)
tagValueListLen = tagValueList.getLen()
res = self.servers[key]._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-server-failed').errorFunc(): logFunc('server._fillWriteTagValues() failed. key=%s', key)
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillReadTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.destinationListObj:
valBegin = Value()
(tag, ns, prefix) = ("destination" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-snmp", "qt-snmp")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.destinationListObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-read-tag-values-destination-failed').errorFunc(): logFunc('destinationListObj._fillReadTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.applicationInitiatedDiscoveryObj:
valBegin = Value()
(tag, ns, prefix) = ("application-initiated-discovery" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-network-ipv6", "qt-net-ip6")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.applicationInitiatedDiscoveryObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-application-initiated-discovery-failed').errorFunc(): logFunc('applicationInitiatedDiscoveryObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def fillTagValuesOpD (self, keyPath, tagValueList, operData):
initialListSize = tagValueList.getLen()
for logFunc in self._log("fill-tag-values-opd").debug3Func(): logFunc("called. operData=%s, keyPath=%s, initialListSize=%d", operData.debugStr(True), keyPath, initialListSize)
if operData.isOpDRequested() and operData.hasOpD():
valBegin = Value()
valBegin.setXmlBegin("op-d", "http://qwilt.com/model/oper", "oper")
tagValueList.push(("op-d", "http://qwilt.com/model/oper"), valBegin)
res = self.myOpD.fillTagValues(keyPath, tagValueList, operData.myOpD)
if res != ReturnCodes.kOk:
for logFunc in self._log("fill-tag-values-opd-my-internal-failed").errorFunc(): logFunc(
"myOpD->fillTagValues() failed. operData=%s, keyPath=%s, initialListSize=%d, tagValueList.getLen()=%d",
operData.debugStr(True), keyPath, initialListSize, tagValueList.getLen())
while tagValueList.getLen() > initialListSize:
tagValueList.pop()
return ReturnCodes.kGeneralError
if tagValueList.getLen() == (initialListSize+1):
# no values were added by opd - rollback the xmltag added
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd("op-d", "http://qwilt.com/model/oper", "oper")
tagValueList.push(("op-d", "http://qwilt.com/model/oper"), valEnd)
for logFunc in self._log("fill-tag-values-opd-ended").debug3Func(): logFunc("ended. operData=%s, keyPath=%s, initialListSize=%d, finalListSize=%d",
operData.debugStr(True), keyPath, initialListSize, tagValueList.getLen())
return ReturnCodes.kOk
def fillTagValues (self, keyPath, tagValueList, operData):
initialListSize = tagValueList.getLen()
for logFunc in self._log("fill-tag-values").debug3Func(): logFunc("called. operData=%s, keyPath=%s, initialListSize=%d", operData.debugStr(True), keyPath, initialListSize)
# fill tag values up to current
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = keyPath.getLen()
while i < self.myKeyPath.getLen():
valBegin = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
for logFunc in self._log("fill-tag-values-adding").debug3Func(): logFunc("adding xml begin. i=%d, valBegin=%s, self.myKeyPath.getLen()=%d", i, valBegin, self.myKeyPath.getLen())
i+=1
if operData.isLocationRequested() and operData.hasLocation():
val = Value()
val.setString(operData.location)
tagValueList.push(("location", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-module"), val)
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = self.myKeyPath.getLen() - 1
while i >= keyPath.getLen():
valEnd = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
i-=1
for logFunc in self._log("fill-tag-values-ended").debug3Func(): logFunc("ended. operData=%s, keyPath=%s, initialListSize=%d, finalListSize=%d",
operData.debugStr(True), keyPath, initialListSize, tagValueList.getLen())
return ReturnCodes.kOk
def _fillReadTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.orderedListListObj:
valBegin = Value()
(tag, ns, prefix) = ("ordered-list" , "http://qwilt.com/model/lake-example", "lake-example")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.orderedListListObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-read-tag-values-ordered-list-failed').errorFunc(): logFunc('orderedListListObj._fillReadTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillReadTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
for key in self.testGenerationUnderscores.keys():
if self.testGenerationUnderscores[key]:
valBegin = Value()
(tag, ns, prefix) = ("test-generation_underscore", "http://qwilt.com/model/lake-example", "lake-example")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
valKey = Value()
valKey.setString(key)
tagValueList.push(("name", "http://qwilt.com/model/lake-example"), valKey)
tagValueListLen = tagValueList.getLen()
res = self.testGenerationUnderscores[key]._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-read-tag-values-testGenerationUnderscore-failed').errorFunc(): logFunc('testGenerationUnderscore._fillReadTagValues() failed. key=%s', key)
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
for key in self.opVs.keys():
if self.opVs[key]:
valBegin = Value()
(tag, ns, prefix) = ("op-v", "http://qwilt.com/model/oper", "oper")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
valKey = Value()
valKey.setString(key)
tagValueList.push(("value-op-v1", "http://qwilt.com/model/oper"), valKey)
tagValueListLen = tagValueList.getLen()
res = self.opVs[key]._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-opV-failed').errorFunc(): logFunc('opV._fillWriteTagValues() failed. key=%s', key)
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillReadTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.isDummyRequested():
valDummy = Value()
valDummy.setEmpty()
tagValueList.push(("dummy", "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/oper-example"), valDummy)
if self.countersObj:
valBegin = Value()
(tag, ns, prefix) = ("counters" , "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/oper-example", "oe")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.countersObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-read-tag-values-counters-failed').errorFunc(): logFunc('countersObj._fillReadTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillReadTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.isHeightRequested():
valHeight = Value()
valHeight.setEmpty()
tagValueList.push(("height", "http://qwilt.com/model/room"), valHeight)
if self.partListObj:
valBegin = Value()
(tag, ns, prefix) = ("parts" , "http://qwilt.com/model/room", "room")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.partListObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-read-tag-values-parts-failed').errorFunc(): logFunc('partListObj._fillReadTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillReadTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.housekeeperObj:
valBegin = Value()
(tag, ns,
prefix) = ("housekeeper",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-log",
"qt-log")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.housekeeperObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log(
'fill-read-tag-values-housekeeper-failed').errorFunc():
logFunc(
'housekeeperObj._fillReadTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.lllListObj:
valBegin = Value()
(tag, ns, prefix) = ("lll" , "http://qwilt.com/model/benchmark", "bnch")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.lllListObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-lll-failed').errorFunc(): logFunc('lllListObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillReadTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
for key in self.aliens.keys():
if self.aliens[key]:
valBegin = Value()
(tag, ns, prefix) = ("alien", "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/oper-example", "oe")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
valKey = Value()
valKey.setString(key)
tagValueList.push(("name", "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/oper-example"), valKey)
tagValueListLen = tagValueList.getLen()
res = self.aliens[key]._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-read-tag-values-alien-failed').errorFunc(): logFunc('alien._fillReadTagValues() failed. key=%s', key)
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasDummy():
valDummy = Value()
if self.dummy is not None:
valDummy.setBool(self.dummy)
else:
valDummy.setEmpty()
tagValueList.push(("dummy", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-log"), valDummy)
if self.thresholdsObj:
valBegin = Value()
(tag, ns, prefix) = ("thresholds" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-log", "qt-log")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.thresholdsObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-thresholds-failed').errorFunc(): logFunc('thresholdsObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
if self.countersObj:
valBegin = Value()
(tag, ns, prefix) = ("counters" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-log", "qt-log")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.countersObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-counters-failed').errorFunc(): logFunc('countersObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasHostname():
valHostname = Value()
if self.hostname is not None:
valHostname.setString(self.hostname)
else:
valHostname.setEmpty()
tagValueList.push(("hostname", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system"), valHostname)
if self.systemDefaultsObj:
valBegin = Value()
(tag, ns, prefix) = ("system-defaults" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system", "qt-sys")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.systemDefaultsObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-system-defaults-failed').errorFunc(): logFunc('systemDefaultsObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
if self.nameResolutionObj:
valBegin = Value()
(tag, ns, prefix) = ("name-resolution" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system", "qt-sys")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.nameResolutionObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-name-resolution-failed').errorFunc(): logFunc('nameResolutionObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasEnabled():
valEnabled = Value()
if self.enabled is not None:
valEnabled.setBool(self.enabled)
else:
valEnabled.setEmpty()
tagValueList.push(("enabled", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system"), valEnabled)
if self.nameServersObj:
valBegin = Value()
(tag, ns, prefix) = ("name-servers" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system", "qt-sys")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.nameServersObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-name-servers-failed').errorFunc(): logFunc('nameServersObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
if self.searchListObj:
valBegin = Value()
(tag, ns, prefix) = ("search" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system", "qt-sys")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.searchListObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-search-failed').errorFunc(): logFunc('searchListObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillReadTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.isType_Requested():
valType_ = Value()
valType_.setEmpty()
tagValueList.push(
("type",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"
), valType_)
if self.isEnabledRequested():
valEnabled = Value()
valEnabled.setEmpty()
tagValueList.push(
("enabled",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"
), valEnabled)
if self.isNameRequested():
valName = Value()
valName.setEmpty()
tagValueList.push(
("name",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"
), valName)
if self.systemDefaultsObj:
valBegin = Value()
(tag, ns, prefix) = (
"system-defaults",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line",
"qtc-line")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.systemDefaultsObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log(
'fill-read-tag-values-system-defaults-failed'
).errorFunc():
logFunc(
'systemDefaultsObj._fillReadTagValues() failed. PARAMS'
)
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasPreferredDeliveryInterface():
valPreferredDeliveryInterface = Value()
if self.preferredDeliveryInterface is not None:
valPreferredDeliveryInterface.setString(self.preferredDeliveryInterface)
else:
valPreferredDeliveryInterface.setEmpty()
tagValueList.push(("preferred-delivery-interface", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-interfaces"), valPreferredDeliveryInterface)
if self.ipv4Obj:
valBegin = Value()
(tag, ns, prefix) = ("ipv4" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-interfaces", "qtc-if")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.ipv4Obj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-ipv4-failed').errorFunc(): logFunc('ipv4Obj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
if self.ipv6Obj:
valBegin = Value()
(tag, ns, prefix) = ("ipv6" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-interfaces", "qtc-if")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.ipv6Obj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-ipv6-failed').errorFunc(): logFunc('ipv6Obj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasMethod():
valMethod = Value()
if self.method is not None:
valMethod.setEnum(self.method.getValue())
else:
valMethod.setEmpty()
tagValueList.push(("method", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-interfaces"), valMethod)
if self.arpObj:
valBegin = Value()
(tag, ns, prefix) = ("arp" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-interfaces", "qt-if")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.arpObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-arp-failed').errorFunc(): logFunc('arpObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
if self.pingObj:
valBegin = Value()
(tag, ns, prefix) = ("ping" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-interfaces", "qt-if")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.pingObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-ping-failed').errorFunc(): logFunc('pingObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def fillTagValues(self, keyPath, tagValueList, operData):
initialListSize = tagValueList.getLen()
for logFunc in self._log("fill-tag-values").debug3Func():
logFunc("called. operData=%s, keyPath=%s, initialListSize=%d",
operData.debugStr(True), keyPath, initialListSize)
# fill tag values up to current
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = keyPath.getLen()
while i < self.myKeyPath.getLen():
valBegin = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
for logFunc in self._log(
"fill-tag-values-adding").debug3Func():
logFunc(
"adding xml begin. i=%d, valBegin=%s, self.myKeyPath.getLen()=%d",
i, valBegin, self.myKeyPath.getLen())
i += 1
if operData.isColorRequested() and operData.hasColor():
val = Value()
val.setEnum(operData.color.getValue())
tagValueList.push(("color", "http://qwilt.com/model/lake-example"),
val)
if operData.isPatternRequested() and operData.hasPattern():
val = Value()
val.setString(operData.pattern)
tagValueList.push(
("pattern", "http://qwilt.com/model/lake-example"), val)
if operData.isMacAddressRequested() and operData.hasMacAddress():
val = Value()
val.setBinary(operData.macAddress.getAddress())
tagValueList.push(
("mac-address", "http://qwilt.com/model/lake-example"), val)
if operData.isLineWidthRequested() and operData.hasLineWidth():
val = Value()
val.setInt8(operData.lineWidth)
tagValueList.push(
("line-width", "http://qwilt.com/model/lake-example"), val)
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = self.myKeyPath.getLen() - 1
while i >= keyPath.getLen():
valEnd = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
i -= 1
for logFunc in self._log("fill-tag-values-ended").debug3Func():
logFunc(
"ended. operData=%s, keyPath=%s, initialListSize=%d, finalListSize=%d",
operData.debugStr(True), keyPath, initialListSize,
tagValueList.getLen())
return ReturnCodes.kOk
def _fillReadTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.isValueOpV1Requested():
valValueOpV1 = Value()
valValueOpV1.setEmpty()
tagValueList.push(("value-op-v1", "http://qwilt.com/model/oper"),
valValueOpV1)
if self.opYObj:
valBegin = Value()
(tag, ns, prefix) = ("op-y", "http://qwilt.com/model/oper", "oper")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.opYObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log(
'fill-read-tag-values-op-y-failed').errorFunc():
logFunc('opYObj._fillReadTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
if self.opWObj:
valBegin = Value()
(tag, ns, prefix) = ("op-w", "http://qwilt.com/model/oper", "oper")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.opWObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log(
'fill-read-tag-values-op-w-failed').errorFunc():
logFunc('opWObj._fillReadTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def fillTagValues (self, keyPath, tagValueList, operData):
initialListSize = tagValueList.getLen()
for logFunc in self._log("fill-tag-values").debug3Func(): logFunc("called. operData=%s, keyPath=%s, initialListSize=%d", operData.debugStr(True), keyPath, initialListSize)
# fill tag values up to current
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = keyPath.getLen()
while i < self.myKeyPath.getLen():
valBegin = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
for logFunc in self._log("fill-tag-values-adding").debug3Func(): logFunc("adding xml begin. i=%d, valBegin=%s, self.myKeyPath.getLen()=%d", i, valBegin, self.myKeyPath.getLen())
i+=1
if operData.isUuidRequested() and operData.hasUuid():
val = Value()
val.setString(operData.uuid)
tagValueList.push(("uuid", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"), val)
if operData.isOperationalStatusRequested() and operData.hasOperationalStatus():
val = Value()
val.setEnum(operData.operationalStatus.getValue())
tagValueList.push(("operational-status", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"), val)
if operData.isFileSystemTypeRawRequested() and operData.hasFileSystemTypeRaw():
val = Value()
val.setString(operData.fileSystemTypeRaw)
tagValueList.push(("file-system-type-raw", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"), val)
if operData.isFileSystemTypeRequested() and operData.hasFileSystemType():
val = Value()
val.setEnum(operData.fileSystemType.getValue())
tagValueList.push(("file-system-type", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"), val)
if operData.isExpectedUuidRequested() and operData.hasExpectedUuid():
val = Value()
val.setString(operData.expectedUuid)
tagValueList.push(("expected-uuid", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"), val)
if operData.isOperationalStatusReasonRequested() and operData.hasOperationalStatusReason():
val = Value()
val.setEnum(operData.operationalStatusReason.getValue())
tagValueList.push(("operational-status-reason", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"), val)
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = self.myKeyPath.getLen() - 1
while i >= keyPath.getLen():
valEnd = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
i-=1
for logFunc in self._log("fill-tag-values-ended").debug3Func(): logFunc("ended. operData=%s, keyPath=%s, initialListSize=%d, finalListSize=%d",
operData.debugStr(True), keyPath, initialListSize, tagValueList.getLen())
return ReturnCodes.kOk
def fillTagValues (self, keyPath, tagValueList, operData):
initialListSize = tagValueList.getLen()
for logFunc in self._log("fill-tag-values").debug3Func(): logFunc("called. operData=%s, keyPath=%s, initialListSize=%d", operData.debugStr(True), keyPath, initialListSize)
# fill tag values up to current
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = keyPath.getLen()
while i < self.myKeyPath.getLen():
valBegin = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
for logFunc in self._log("fill-tag-values-adding").debug3Func(): logFunc("adding xml begin. i=%d, valBegin=%s, self.myKeyPath.getLen()=%d", i, valBegin, self.myKeyPath.getLen())
i+=1
if operData.isActiveSecondsRequested() and operData.hasActiveSeconds():
val = Value()
val.setInt64(operData.activeSeconds)
tagValueList.push(("active-seconds", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-log"), val)
if operData.isTotalSecondsRequested() and operData.hasTotalSeconds():
val = Value()
val.setInt64(operData.totalSeconds)
tagValueList.push(("total-seconds", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-log"), val)
if operData.isPollsRequested() and operData.hasPolls():
val = Value()
val.setInt64(operData.polls)
tagValueList.push(("polls", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-log"), val)
if operData.isPollsMissedRequested() and operData.hasPollsMissed():
val = Value()
val.setInt64(operData.pollsMissed)
tagValueList.push(("polls-missed", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-log"), val)
if operData.isPollLatencyWarningsRequested() and operData.hasPollLatencyWarnings():
val = Value()
val.setInt64(operData.pollLatencyWarnings)
tagValueList.push(("poll-latency-warnings", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-log"), val)
if operData.isPollLatencyErrorsRequested() and operData.hasPollLatencyErrors():
val = Value()
val.setInt64(operData.pollLatencyErrors)
tagValueList.push(("poll-latency-errors", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-log"), val)
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = self.myKeyPath.getLen() - 1
while i >= keyPath.getLen():
valEnd = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
i-=1
for logFunc in self._log("fill-tag-values-ended").debug3Func(): logFunc("ended. operData=%s, keyPath=%s, initialListSize=%d, finalListSize=%d",
operData.debugStr(True), keyPath, initialListSize, tagValueList.getLen())
return ReturnCodes.kOk
def _fillWriteTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.hasName():
valName = Value()
if self.name is not None:
valName.setString(self.name)
else:
valName.setEmpty()
tagValueList.push((
"name",
"http://qwilt.com/ns/yang/ut/sys/blinky/example/python/oper-example"
), valName)
if self.hasHeight():
valHeight = Value()
if self.height is not None:
valHeight.setInt64(self.height)
else:
valHeight.setEmpty()
tagValueList.push((
"height",
"http://qwilt.com/ns/yang/ut/sys/blinky/example/python/oper-example"
), valHeight)
if self.statusWrapperObj:
valBegin = Value()
(tag, ns, prefix) = (
"status-wrapper",
"http://qwilt.com/ns/yang/ut/sys/blinky/example/python/oper-example",
"oe")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.statusWrapperObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log(
'fill-write-tag-values-status-wrapper-failed'
).errorFunc():
logFunc(
'statusWrapperObj._fillWriteTagValues() failed. PARAMS'
)
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def fillTagValues (self, keyPath, tagValueList, operData):
initialListSize = tagValueList.getLen()
for logFunc in self._log("fill-tag-values").debug3Func(): logFunc("called. operData=%s, keyPath=%s, initialListSize=%d", operData.debugStr(True), keyPath, initialListSize)
# fill tag values up to current
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = keyPath.getLen()
while i < self.myKeyPath.getLen():
valBegin = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
for logFunc in self._log("fill-tag-values-adding").debug3Func(): logFunc("adding xml begin. i=%d, valBegin=%s, self.myKeyPath.getLen()=%d", i, valBegin, self.myKeyPath.getLen())
i+=1
if operData.isSilentDroppedPacketsRequested() and operData.hasSilentDroppedPackets():
val = Value()
val.setInt64(operData.silentDroppedPackets)
tagValueList.push(("silent-dropped-packets", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-snmp"), val)
if operData.isInPacketsRequested() and operData.hasInPackets():
val = Value()
val.setInt64(operData.inPackets)
tagValueList.push(("in-packets", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-snmp"), val)
if operData.isInBadVersionPacketsRequested() and operData.hasInBadVersionPackets():
val = Value()
val.setInt64(operData.inBadVersionPackets)
tagValueList.push(("in-bad-version-packets", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-snmp"), val)
if operData.isInBadCommunityUsePacketsRequested() and operData.hasInBadCommunityUsePackets():
val = Value()
val.setInt64(operData.inBadCommunityUsePackets)
tagValueList.push(("in-bad-community-use-packets", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-snmp"), val)
if operData.isInAsnParseErrorsRequested() and operData.hasInAsnParseErrors():
val = Value()
val.setInt64(operData.inAsnParseErrors)
tagValueList.push(("in-asn-parse-errors", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-snmp"), val)
if operData.isInBadCommunityPacketsRequested() and operData.hasInBadCommunityPackets():
val = Value()
val.setInt64(operData.inBadCommunityPackets)
tagValueList.push(("in-bad-community-packets", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-snmp"), val)
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = self.myKeyPath.getLen() - 1
while i >= keyPath.getLen():
valEnd = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
i-=1
for logFunc in self._log("fill-tag-values-ended").debug3Func(): logFunc("ended. operData=%s, keyPath=%s, initialListSize=%d, finalListSize=%d",
operData.debugStr(True), keyPath, initialListSize, tagValueList.getLen())
return ReturnCodes.kOk
def fillTagValues (self, keyPath, tagValueList, operData):
initialListSize = tagValueList.getLen()
for logFunc in self._log("fill-tag-values").debug3Func(): logFunc("called. operData=%s, keyPath=%s, initialListSize=%d", operData.debugStr(True), keyPath, initialListSize)
# fill tag values up to current
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = keyPath.getLen()
while i < self.myKeyPath.getLen():
valBegin = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
for logFunc in self._log("fill-tag-values-adding").debug3Func(): logFunc("adding xml begin. i=%d, valBegin=%s, self.myKeyPath.getLen()=%d", i, valBegin, self.myKeyPath.getLen())
i+=1
if operData.isCommandWarningTimeoutsRequested() and operData.hasCommandWarningTimeouts():
val = Value()
val.setInt64(operData.commandWarningTimeouts)
tagValueList.push(("command-warning-timeouts", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-platform-manager"), val)
if operData.isCommandErrorsRequested() and operData.hasCommandErrors():
val = Value()
val.setInt64(operData.commandErrors)
tagValueList.push(("command-errors", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-platform-manager"), val)
if operData.isFileErrorsRequested() and operData.hasFileErrors():
val = Value()
val.setInt64(operData.fileErrors)
tagValueList.push(("file-errors", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-platform-manager"), val)
if operData.isReadsRequested() and operData.hasReads():
val = Value()
val.setInt64(operData.reads)
tagValueList.push(("reads", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-platform-manager"), val)
if operData.isParsingErrorsRequested() and operData.hasParsingErrors():
val = Value()
val.setInt64(operData.parsingErrors)
tagValueList.push(("parsing-errors", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-platform-manager"), val)
if operData.isCommandTimeoutsRequested() and operData.hasCommandTimeouts():
val = Value()
val.setInt64(operData.commandTimeouts)
tagValueList.push(("command-timeouts", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-platform-manager"), val)
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = self.myKeyPath.getLen() - 1
while i >= keyPath.getLen():
valEnd = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
i-=1
for logFunc in self._log("fill-tag-values-ended").debug3Func(): logFunc("ended. operData=%s, keyPath=%s, initialListSize=%d, finalListSize=%d",
operData.debugStr(True), keyPath, initialListSize, tagValueList.getLen())
return ReturnCodes.kOk
def _fillWriteTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.hasTrimContentItemSizeMb():
valTrimContentItemSizeMb = Value()
if self.trimContentItemSizeMb is not None:
valTrimContentItemSizeMb.setInt64(self.trimContentItemSizeMb)
else:
valTrimContentItemSizeMb.setEmpty()
tagValueList.push(
("trim-content-item-size-mb",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"
), valTrimContentItemSizeMb)
if self.hasName():
valName = Value()
if self.name is not None:
valName.setString(self.name)
else:
valName.setEmpty()
tagValueList.push(
("name",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"
), valName)
if self.systemDefaultsObj:
valBegin = Value()
(tag, ns, prefix) = (
"system-defaults",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line",
"qtc-line")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.systemDefaultsObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log(
'fill-write-tag-values-system-defaults-failed'
).errorFunc():
logFunc(
'systemDefaultsObj._fillWriteTagValues() failed. PARAMS'
)
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillReadTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.isOpValueBRequested():
valOpValueB = Value()
valOpValueB.setEmpty()
tagValueList.push(("op-value-b", "http://qwilt.com/model/oper"), valOpValueB)
if self.opCListObj:
valBegin = Value()
(tag, ns, prefix) = ("op-c" , "http://qwilt.com/model/oper", "oper")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.opCListObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-read-tag-values-op-c-failed').errorFunc(): logFunc('opCListObj._fillReadTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
if self.opDObj:
valBegin = Value()
(tag, ns, prefix) = ("op-d" , "http://qwilt.com/model/oper", "oper")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.opDObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-read-tag-values-op-d-failed').errorFunc(): logFunc('opDObj._fillReadTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillReadTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.isMaxActiveConnectionsRequested():
valMaxActiveConnections = Value()
valMaxActiveConnections.setEmpty()
tagValueList.push(
("max-active-connections",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"
), valMaxActiveConnections)
if self.isEnabledRequested():
valEnabled = Value()
valEnabled.setEmpty()
tagValueList.push(
("enabled",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"
), valEnabled)
if self.isMaxRedirectRateRequested():
valMaxRedirectRate = Value()
valMaxRedirectRate.setEmpty()
tagValueList.push(
("max-redirect-rate",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"
), valMaxRedirectRate)
if self.blockerObj:
valBegin = Value()
(tag, ns, prefix) = (
"blocker",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line",
"qtc-line")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.blockerObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log(
'fill-read-tag-values-blocker-failed').errorFunc():
logFunc('blockerObj._fillReadTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillReadTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.isImplementationRequested():
valImplementation = Value()
valImplementation.setEmpty()
tagValueList.push(
("implementation",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"
), valImplementation)
if self.isControllerRequested():
valController = Value()
valController.setEmpty()
tagValueList.push(
("controller",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"
), valController)
if self.isIdRequested():
valId = Value()
valId.setEmpty()
tagValueList.push(
("id",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"
), valId)
if self.statusObj:
valBegin = Value()
(tag, ns, prefix) = (
"status",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk",
"qt-strg-dsk")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.statusObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log(
'fill-read-tag-values-status-failed').errorFunc():
logFunc('statusObj._fillReadTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def fillTagValues(self, keyPath, tagValueList, operData):
initialListSize = tagValueList.getLen()
for logFunc in self._log("fill-tag-values").debug3Func():
logFunc("called. operData=%s, keyPath=%s, initialListSize=%d",
operData.debugStr(True), keyPath, initialListSize)
# fill tag values up to current
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = keyPath.getLen()
while i < self.myKeyPath.getLen():
valBegin = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
for logFunc in self._log(
"fill-tag-values-adding").debug3Func():
logFunc(
"adding xml begin. i=%d, valBegin=%s, self.myKeyPath.getLen()=%d",
i, valBegin, self.myKeyPath.getLen())
i += 1
if operData.isIpValRequested() and operData.hasIpVal():
val = Value()
val.setIPv4(operData.ipVal)
tagValueList.push(("ip-val", "http://qwilt.com/model/oper"), val)
if operData.isIdRequested() and operData.hasId():
val = Value()
val.setInt64(operData.id)
tagValueList.push(("id", "http://qwilt.com/model/oper"), val)
if operData.isValRequested() and operData.hasVal():
val = Value()
val.setInt64(operData.val)
tagValueList.push(("val", "http://qwilt.com/model/oper"), val)
if operData.isIpPrefixValRequested() and operData.hasIpPrefixVal():
val = Value()
val.setIPv4Prefix(operData.ipPrefixVal)
tagValueList.push(("ip-prefix-val", "http://qwilt.com/model/oper"),
val)
if self.myKeyPath.isEqualLen(keyPath, keyPath.getLen()):
i = self.myKeyPath.getLen() - 1
while i >= keyPath.getLen():
valEnd = Value()
(tag, ns, prefix) = self.myKeyPath.getAt(i).asXmlTag()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
i -= 1
for logFunc in self._log("fill-tag-values-ended").debug3Func():
logFunc(
"ended. operData=%s, keyPath=%s, initialListSize=%d, finalListSize=%d",
operData.debugStr(True), keyPath, initialListSize,
tagValueList.getLen())
return ReturnCodes.kOk
def _fillReadTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.isTimezoneRequested():
valTimezone = Value()
valTimezone.setEmpty()
tagValueList.push(("timezone", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system-clock"), valTimezone)
if self.statusObj:
valBegin = Value()
(tag, ns, prefix) = ("status" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system-clock", "qt-sys-clock")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.statusObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-read-tag-values-status-failed').errorFunc(): logFunc('statusObj._fillReadTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
if self.systemDefaultsObj:
valBegin = Value()
(tag, ns, prefix) = ("system-defaults" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system-clock", "qt-sys-clock")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.systemDefaultsObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-read-tag-values-system-defaults-failed').errorFunc(): logFunc('systemDefaultsObj._fillReadTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillReadTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.isColorRequested():
valColor = Value()
valColor.setEmpty()
tagValueList.push((
"color",
"http://qwilt.com/ns/yang/ut/sys/blinky/example/python/simple-example"
), valColor)
if self.isPrettyRequested():
valPretty = Value()
valPretty.setEmpty()
tagValueList.push((
"pretty",
"http://qwilt.com/ns/yang/ut/sys/blinky/example/python/simple-example"
), valPretty)
if self.isNumOfLegsRequested():
valNumOfLegs = Value()
valNumOfLegs.setEmpty()
tagValueList.push((
"num-of-legs",
"http://qwilt.com/ns/yang/ut/sys/blinky/example/python/simple-example"
), valNumOfLegs)
if self.statusObj:
valBegin = Value()
(tag, ns, prefix) = (
"status",
"http://qwilt.com/ns/yang/ut/sys/blinky/example/python/simple-example",
"se")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.statusObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log(
'fill-read-tag-values-status-failed').errorFunc():
logFunc('statusObj._fillReadTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillReadTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-read-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.isAutoInitRequested():
valAutoInit = Value()
valAutoInit.setEmpty()
tagValueList.push(("auto-init", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"), valAutoInit)
if self.isOsDeviceRequested():
valOsDevice = Value()
valOsDevice.setEmpty()
tagValueList.push(("os-device", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"), valOsDevice)
if self.isImplementationRequested():
valImplementation = Value()
valImplementation.setEmpty()
tagValueList.push(("implementation", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"), valImplementation)
if self.isRaidTypeRequested():
valRaidType = Value()
valRaidType.setEmpty()
tagValueList.push(("raid-type", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"), valRaidType)
if self.isNameRequested():
valName = Value()
valName.setEmpty()
tagValueList.push(("name", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk"), valName)
if self.statusObj:
valBegin = Value()
(tag, ns, prefix) = ("status" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-storage-disk", "qt-strg-dsk")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.statusObj._fillReadTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-read-tag-values-status-failed').errorFunc(): logFunc('statusObj._fillReadTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.hasMuteReporting():
valMuteReporting = Value()
if self.muteReporting is not None:
valMuteReporting.setBool(self.muteReporting)
else:
valMuteReporting.setEmpty()
tagValueList.push((
"mute-reporting",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-platform-temperature"
), valMuteReporting)
if self.hasEnabled():
valEnabled = Value()
if self.enabled is not None:
valEnabled.setBool(self.enabled)
else:
valEnabled.setEmpty()
tagValueList.push((
"enabled",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-platform-temperature"
), valEnabled)
if self.simulationObj:
valBegin = Value()
(tag, ns, prefix) = (
"simulation",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-platform-temperature",
"qt-pltf-temperature")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.simulationObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log(
'fill-write-tag-values-simulation-failed').errorFunc():
logFunc(
'simulationObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.hasEnabled():
valEnabled = Value()
if self.enabled is not None:
valEnabled.setBool(self.enabled)
else:
valEnabled.setEmpty()
tagValueList.push(
("enabled",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-process"),
valEnabled)
if self.hasName():
valName = Value()
if self.name is not None:
valName.setString(self.name)
else:
valName.setEmpty()
tagValueList.push(
("name",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-process"),
valName)
if self.executionObj:
valBegin = Value()
(tag, ns, prefix) = (
"execution",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-process",
"qt-proc")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.executionObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log(
'fill-write-tag-values-execution-failed').errorFunc():
logFunc(
'executionObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasMaxActiveConnections():
valMaxActiveConnections = Value()
if self.maxActiveConnections is not None:
valMaxActiveConnections.setInt64(self.maxActiveConnections)
else:
valMaxActiveConnections.setEmpty()
tagValueList.push(("max-active-connections", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valMaxActiveConnections)
if self.hasEnabled():
valEnabled = Value()
if self.enabled is not None:
valEnabled.setBool(self.enabled)
else:
valEnabled.setEmpty()
tagValueList.push(("enabled", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valEnabled)
if self.hasMaxRedirectRate():
valMaxRedirectRate = Value()
if self.maxRedirectRate is not None:
valMaxRedirectRate.setInt64(self.maxRedirectRate)
else:
valMaxRedirectRate.setEmpty()
tagValueList.push(("max-redirect-rate", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valMaxRedirectRate)
if self.blockerObj:
valBegin = Value()
(tag, ns, prefix) = ("blocker" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line", "qtc-line")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.blockerObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-blocker-failed').errorFunc(): logFunc('blockerObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasColor():
valColor = Value()
if self.color is not None:
valColor.setString(self.color)
else:
valColor.setEmpty()
tagValueList.push(("color", "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/simple-example"), valColor)
if self.hasPretty():
valPretty = Value()
if self.pretty is not None:
valPretty.setBool(self.pretty)
else:
valPretty.setEmpty()
tagValueList.push(("pretty", "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/simple-example"), valPretty)
if self.hasNumOfLegs():
valNumOfLegs = Value()
if self.numOfLegs is not None:
valNumOfLegs.setInt64(self.numOfLegs)
else:
valNumOfLegs.setEmpty()
tagValueList.push(("num-of-legs", "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/simple-example"), valNumOfLegs)
if self.statusObj:
valBegin = Value()
(tag, ns, prefix) = ("status" , "http://qwilt.com/ns/yang/ut/sys/blinky/example/python/simple-example", "se")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.statusObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-status-failed').errorFunc(): logFunc('statusObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasEnabled():
valEnabled = Value()
if self.enabled is not None:
valEnabled.setBool(self.enabled)
else:
valEnabled.setEmpty()
tagValueList.push(("enabled", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system-alarms"), valEnabled)
if self.hasRaiseTestAlarm():
valRaiseTestAlarm = Value()
if self.raiseTestAlarm is not None:
valRaiseTestAlarm.setBool(self.raiseTestAlarm)
else:
valRaiseTestAlarm.setEmpty()
tagValueList.push(("raise-test-alarm", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system-alarms"), valRaiseTestAlarm)
if self.hasPollInterval():
valPollInterval = Value()
if self.pollInterval is not None:
valPollInterval.setInt64(self.pollInterval)
else:
valPollInterval.setEmpty()
tagValueList.push(("poll-interval", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system-alarms"), valPollInterval)
if self.thresholdsObj:
valBegin = Value()
(tag, ns, prefix) = ("thresholds" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-system-alarms", "qt-sys-alarms")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.thresholdsObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-thresholds-failed').errorFunc(): logFunc('thresholdsObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues (self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func(): logFunc('called: tagValueList=%s', tagValueList)
if self.hasType_():
valType_ = Value()
if self.type_ is not None:
valType_.setEnum(self.type_.getValue())
else:
valType_.setEmpty()
tagValueList.push(("type", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valType_)
if self.hasEnabled():
valEnabled = Value()
if self.enabled is not None:
valEnabled.setBool(self.enabled)
else:
valEnabled.setEmpty()
tagValueList.push(("enabled", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valEnabled)
if self.hasName():
valName = Value()
if self.name is not None:
valName.setString(self.name)
else:
valName.setEmpty()
tagValueList.push(("name", "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line"), valName)
if self.systemDefaultsObj:
valBegin = Value()
(tag, ns, prefix) = ("system-defaults" , "http://qwilt.com/ns/yang/device/tech/qwilt-tech-content-line", "qtc-line")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.systemDefaultsObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log('fill-write-tag-values-system-defaults-failed').errorFunc(): logFunc('systemDefaultsObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk
def _fillWriteTagValues(self, tagValueList):
self.myInitGuard.isInitOrCrash()
for logFunc in self._log('fill-write-tag-values').debug3Func():
logFunc('called: tagValueList=%s', tagValueList)
if self.hasId():
valId = Value()
if self.id is not None:
valId.setString(self.id)
else:
valId.setEmpty()
tagValueList.push((
"id",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-platform-power"
), valId)
if self.hasFruId():
valFruId = Value()
if self.fruId is not None:
valFruId.setString(self.fruId)
else:
valFruId.setEmpty()
tagValueList.push((
"fru-id",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-platform-power"
), valFruId)
if self.statusObj:
valBegin = Value()
(tag, ns, prefix) = (
"status",
"http://qwilt.com/ns/yang/device/tech/qwilt-tech-platform-power",
"qt-pltf-pwr")
valBegin.setXmlBegin((tag, ns, prefix))
tagValueList.push((tag, ns), valBegin)
tagValueListLen = tagValueList.getLen()
res = self.statusObj._fillWriteTagValues(tagValueList)
if res != ReturnCodes.kOk:
for logFunc in self._log(
'fill-write-tag-values-status-failed').errorFunc():
logFunc('statusObj._fillWriteTagValues() failed. PARAMS')
return ReturnCodes.kGeneralError
if tagValueList.getLen() == tagValueListLen:
# descendant didn't add anything, no need to read it.
tagValueList.pop()
else:
valEnd = Value()
valEnd.setXmlEnd((tag, ns, prefix))
tagValueList.push((tag, ns), valEnd)
return ReturnCodes.kOk