def main(intopo):
# Read plon,plat
gfile = abf.ABFileGrid("regional.grid", "r")
plon = gfile.read_field("plon")
plat = gfile.read_field("plat")
gfile.close()
# Read input bathymetry
bfile = abf.ABFileBathy(intopo,
"r",
idm=gfile.idm,
jdm=gfile.jdm,
mask=True)
in_depth_m = bfile.read_field("depth")
bfile.close()
# Print to CICE mask files
kmt = numpy.where(~in_depth_m.mask, 1., 0.)
modeltools.cice.io.write_netcdf_kmt(kmt, "cice_kmt.nc")
def spatiomean(fldin,regi_mask):
# fldin=[]
ab = abf.ABFileGrid("regional.grid","r")
pplon=ab.read_field("plon")
pplat=ab.read_field("plat")
scppx=ab.read_field("scpx")
scppy=ab.read_field("scpy")
abdpth = abf.ABFileBathy('regional.depth',"r",idm=ab.idm,jdm=ab.jdm)
mdpth=abdpth.read_field('depth')
maskdd=mdpth.data
maskdd[maskdd>1e29]=np.nan
#fldin[fldin>1e29]=np.nan
#scppx[np.isnan(maskdd)]=np.nan
#scppy[np.isnan(maskdd)]=np.nan
### # mask for specific region
### #Nordic=False
### if Nordmask:
### print 'Compute for Nordic------>>>>>>-'
### maskdd[pplat>80]=np.nan
### maskdd[pplat<55]=np.nan
### maskdd[pplon>60]=np.nan
### maskdd[pplon<-60]=np.nan
### #Norid
### #fldin[np.isnan(maskdd)]=np.nan
### #scppx[np.isnan(maskdd)]=np.nan
### #scppy[np.isnan(maskdd)]=np.nan
### #--
numer=fldin*scppx*scppy
denum=scppx*scppy
numer[np.isnan(regi_mask)]=np.nan
denum[np.isnan(regi_mask)]=np.nan
fldin_avg=np.nansum(numer)/np.nansum(denum)
print('np.nansum(numer)='), print(np.nansum(numer))
print('np.nansum(denum)='), print(np.nansum(denum))
print('fldin_avg='), print(fldin_avg)
#direct mean
return fldin_avg
def main(myfiles,
fieldname,
idm=None,
jdm=None,
clim=None,
filetype="archive",
window=None,
cmap="jet",
datetime1=None,
datetime2=None,
vector="",
tokml=False,
masklim=None,
filename2='',
dpi=180):
cmap = matplotlib.pyplot.get_cmap("jet")
if tokml:
ab = abf.ABFileGrid("regional.grid", "r")
plon = ab.read_field("plon")
plat = ab.read_field("plat")
ab.close()
ab = abf.ABFileGrid("regional.grid", "r")
plon = ab.read_field("plon")
plat = ab.read_field("plat")
scpx = ab.read_field("scpx")
scpy = ab.read_field("scpy")
target_lonlats = [plon, plat]
abdpth = abf.ABFileBathy('regional.depth', "r", idm=ab.idm, jdm=ab.jdm)
mdpth = abdpth.read_field('depth')
maskd = mdpth.data
maskd[maskd > 1e29] = np.nan
#Region_mask=True
Region_mask = False
if Region_mask:
maskd[plat > 80] = np.nan
maskd[plat < 50] = np.nan
maskd[plon > 60] = np.nan
maskd[plon < -50] = np.nan
Nordic_mask = maskd
proj = ccrs.Stereographic(central_latitude=90.0, central_longitude=-40.0)
pxy = proj.transform_points(ccrs.PlateCarree(), plon, plat)
px = pxy[:, :, 0]
py = pxy[:, :, 1]
x, y = np.meshgrid(np.arange(plon.shape[1]), np.arange(plon.shape[0]))
if vector:
logger.info("Vector component 1:%s" % fieldname)
logger.info("Vector component 2:%s" % vector)
#---------------
fieldlevel = 0
Err_map = 1
#freezp=-2.5
freezp = -1.8
Point_tid = True
Point_tid = False
if Point_tid:
ix = 1394
jy = 267
sum_fld1 = maskd
sum_fld1[~np.isnan(sum_fld1)] = 0.0
Clim_arr = np.zeros((plon.shape[0], plon.shape[1], 12))
#---------------
# compute for TP6 files
figure = matplotlib.pyplot.figure(figsize=(8, 8))
ax = figure.add_subplot(111)
counter = 0
file_count = 0
sum_fld1 = maskd
sum_fld1[~np.isnan(sum_fld1)] = 0.0
#-----------------------------------------
figure = matplotlib.pyplot.figure(figsize=(8, 8))
ax = figure.add_subplot(111)
onemm = 9.806
counter = 0
file_count = 0
sum_fld1 = maskd
sum_fld1[~np.isnan(sum_fld1)] = 0.0
dt_cnl = np.zeros(len(myfiles))
diff_dt_cnl = np.zeros(len(myfiles))
rmse_dt_cnl = np.zeros(len(myfiles))
Labl1 = myfiles[0][:28]
#Labl1="CNTL: New prsbas=0"
yyyy1 = myfiles[0][-14:-10]
print("myfiles[0]=", myfiles[0])
print("yyy1=", yyyy1)
base = datetime.datetime(int(yyyy1), 1, 15)
tid = np.array(
[base + relativedelta(months=i) for i in range(len(myfiles))])
counter = 0
file_count = 0
sum_fld1 = maskd
sum_fld1[~np.isnan(sum_fld1)] = 0.0
logger.info(
">>>>>--------------------------Processing the first files= myfiles")
if "salin" in fieldname:
fieldname = "salin01"
for ncfile0 in myfiles:
logger.info("Now processing %s" % ncfile0)
fh = Dataset(ncfile0, mode='r')
fld_arr = fh.variables[fieldname][:]
if "srfhgt" in fieldname:
#convert to "m"
fld_arr = fld_arr / 9.806
print("fld_arr.shpe", fld_arr.shape)
tot = fld_arr.shape[0]
fh.close()
for ii in range(tot):
fld = fld_arr[ii, :, :]
print('mn,mx=', fld.min(), fld.max(), 'count=', counter)
dt_cnl[counter] = np.nanmean(fld)
if Point_tid:
dt_cnl[counter] = fld[jy, ix]
print("fld.shape", fld.shape)
print("Nordic_mask.shape", Nordic_mask.shape)
counter = counter + 1
sum_fld1 = sum_fld1 + fld
del fld
# End i_intloop
print('Computing the avearge of file_counter= ', file_count, 'counter=',
counter)
#next experminet
if filename2:
dt_2 = np.zeros(len(filename2))
diff_dt_2 = np.zeros(len(filename2))
rmse_dt_2 = np.zeros(len(filename2))
yyyy2 = filename2[0][-14:-10]
print("filename2[0]=", filename2[0])
print("yyy1=", yyyy2)
tid_2 = np.array([
datetime.datetime(int(yyyy2), 1, 15) + relativedelta(months=i)
for i in range(len(filename2))
])
Labl2 = filename2[0][:28]
counter = 0
file_count = 0
sum_fld1 = maskd
sum_fld1[~np.isnan(sum_fld1)] = 0.0
logger.info(
">>>>>--------------------------Processing the first files= myfiles"
)
for ncfil in filename2:
logger.info("Now processing %s" % ncfil)
fh = Dataset(ncfil, mode='r')
fld_arr = fh.variables[fieldname][:]
if "srfhgt" in fieldname:
fld_arr = fld_arr / 9.806
print("fld_arr.shpe", fld_arr.shape)
tot = fld_arr.shape[0]
fh.close()
for ii in range(tot):
fld = fld_arr[ii, :, :]
#fld=np.ma.masked_where(fld<freezp,fld)
print('mn,mx=', fld.min(), fld.max(), 'count=', counter)
dt_2[counter] = np.nanmean(fld)
if Point_tid:
dt_2[counter] = fld[jy, ix]
counter = counter + 1
sum_fld1 = sum_fld1 + fld
del fld
#---------------------------------------
figure, ax = plt.subplots()
years = YearLocator() # every year
months = MonthLocator() # every month
yearsFmt = DateFormatter('%Y')
#ax=figure.add_subplot(111)
nplts = 1
ax.plot_date(tid, dt_cnl, '-o', color='g', ms=3, label=Labl1)
if filename2:
ax.plot_date(tid_2, dt_2, '-v', color='blue', ms=3, label=Labl2)
ax.xaxis.set_major_locator(years)
ax.xaxis.set_major_formatter(yearsFmt)
ax.xaxis.set_minor_locator(months)
ax.autoscale_view()
# format the coords message box
def price(x):
return '$%1.2f' % x
ax.fmt_xdata = DateFormatter('%Y-%m-%d')
ax.fmt_ydata = price
ax.grid(True)
figure.autofmt_xdate()
legend = plt.legend(loc='upper right', fontsize=8)
if Point_tid:
plt.title("Point:(lon,lat)=(" + str(plon[jy, ix]) + ',' +
str(plat[jy, ix]) + "): %s(%d)" % (fieldname, fieldlevel))
else:
plt.title("Area-averaged: %s(%d)" % (fieldname, fieldlevel))
#plt.xlabel('dayes')
if "srfhgt" in fieldname:
plt.ylabel("%s[m]" % (fieldname))
else:
plt.ylabel("%s(%d)" % (fieldname, fieldlevel))
#plt.title('Pakistan India Population till 2007')
ts_fil = "Time_series_cntl%s_%02d_%02d" % (fieldname, fieldlevel,
len(myfiles))
if Region_mask:
ts_fil = 'Region_' + ts_fil
if Point_tid:
ts_fil = 'Point_ix' + str(ix) + 'jy' + str(jy) + ts_fil
figure.canvas.print_figure(ts_fil, bbox_inches='tight', dpi=dpi)
logger.info("Successfull printing: %s" % ts_fil)
def main(infile_coarse,infile_fine,
ncells_linear=20,
ncells_exact=3,
check_consistency=False,
bathy_threshold=0.) :
#bathy_threshold=0. # TODO
logger.info("Bathy threshold is %12.4f"%bathy_threshold)
# Read plon,plat
gfile=abf.ABFileGrid("regional.grid","r")
plon=gfile.read_field("plon")
plat=gfile.read_field("plat")
gfile.close()
# Read input bathymetry - fine version
m=re.match( "^(.*)(\.[ab])", infile_fine)
if m : infile_fine=m.group(1)
bfile=abf.ABFileBathy(infile_fine,"r",idm=gfile.idm,jdm=gfile.jdm)
fine_depth_m=bfile.read_field("depth")
fine_depth_m=numpy.ma.masked_where(fine_depth_m<=bathy_threshold,fine_depth_m)
fine_depth=numpy.ma.filled(fine_depth_m,bathy_threshold)
bfile.close()
# Read input bathymetry - coarse version
m=re.match( "^(.*)(\.[ab])", infile_coarse)
if m : infile_coarse=m.group(1)
bfile=abf.ABFileBathy(infile_coarse,"r",idm=gfile.idm,jdm=gfile.jdm)
coarse_depth_m=bfile.read_field("depth")
coarse_depth_m=numpy.ma.masked_where(coarse_depth_m<=bathy_threshold,coarse_depth_m)
coarse_depth=numpy.ma.filled(coarse_depth_m,bathy_threshold)
bfile.close()
# create relaxation mask (rmu)
tmp=numpy.linspace(0.,1.,ncells_linear)
tmp=numpy.concatenate((numpy.zeros((ncells_exact,)),tmp)) # ie: hree first cells will match outer bathymetry
ncells=ncells_linear+ncells_exact
rmu=numpy.ones(coarse_depth.shape)
rmu[:,0:ncells] = numpy.minimum(tmp,rmu[:,0:ncells])
rmu[0:ncells,:] = numpy.minimum(tmp,rmu[0:ncells,:].transpose()).transpose()
rmu[:,-ncells:] = numpy.minimum(tmp[::-1],rmu[:,-ncells:])
rmu[-ncells:,:] = numpy.minimum(tmp[::-1],rmu[-ncells:,:].transpose()).transpose()
## Only allow points where both models are defined in the boundaruy
rmumask=fine_depth_m.mask
rmumask[:,0:ncells] = numpy.logical_or(rmumask[:,0:ncells],coarse_depth_m.mask[:,0:ncells])
rmumask[0:ncells,:] = numpy.logical_or(rmumask[0:ncells,:],coarse_depth_m.mask[0:ncells,:])
rmumask[:,-ncells:] = numpy.logical_or(rmumask[:,-ncells:],coarse_depth_m.mask[:,-ncells:])
rmumask[-ncells:,:] = numpy.logical_or(rmumask[-ncells:,:],coarse_depth_m.mask[-ncells:,:])
figure = matplotlib.pyplot.figure(figsize=(8,8))
ax=figure.add_subplot(111)
P=ax.pcolormesh(rmu)
figure.colorbar(P)#,norm=matplotlib.colors.LogNorm(vmin=mask.min(), vmax=mask.max()))
figure.canvas.print_figure("tst.png")
# Modify bathy in mask region
newbathy = (1.-rmu) * coarse_depth + rmu * fine_depth
newbathy[rmumask] = bathy_threshold
newbathy[:,0]=bathy_threshold
newbathy[:,-1]=bathy_threshold
newbathy[0,:]=bathy_threshold
newbathy[-1,:]=bathy_threshold
#print newbathy.min(),newbathy.max()
# Make call to consistency routine
if check_consistency :
logger.info("Passing merged bathymetry to consistency check ")
import hycom_bathy_consistency # Normally in same dir as this python routine, so ok
newbathy=hycom_bathy_consistency.main("",[],[],
remove_isolated_basins=True,
remove_one_neighbour_cells=True,
remove_islets=True,
remove_inconsistent_nesting_zone=True,
inbathy=numpy.ma.masked_where(newbathy<=bathy_threshold,newbathy),
write_to_file=False)
# Mask data where depth below threshold
newbathy_m=numpy.ma.masked_where(newbathy<=bathy_threshold,newbathy)
# Create netcdf file with all stages for analysis
logger.info("Writing bathymetry to diagnostic file bathy_merged.nc")
ncid = netCDF4.Dataset("bathy_merged.nc","w")
ncid.createDimension("idm",newbathy.shape[1])
ncid.createDimension("jdm",newbathy.shape[0])
ncid.createVariable("lon","f8",("jdm","idm"))
ncid.createVariable("lat","f8",("jdm","idm"))
ncid.createVariable("coarse","f8",("jdm","idm"))
ncid.createVariable("coarse_masked","f8",("jdm","idm"))
ncid.createVariable("fine","f8",("jdm","idm"))
ncid.createVariable("fine_masked","f8",("jdm","idm"))
ncid.createVariable("final","f8",("jdm","idm"))
ncid.createVariable("final_masked","f8",("jdm","idm"))
ncid.createVariable("rmu","f8",("jdm","idm"))
ncid.createVariable("modified","f8",("jdm","idm"))
ncid.variables["lon"][:]=plon
ncid.variables["lat"][:]=plat
ncid.variables["coarse"][:]=coarse_depth
ncid.variables["coarse_masked"][:]=coarse_depth_m
ncid.variables["fine"][:]=fine_depth
ncid.variables["fine_masked"][:]=fine_depth_m
ncid.variables["final"][:]=newbathy
ncid.variables["final_masked"][:]=newbathy_m
modmask=newbathy-fine_depth
ncid.variables["modified"][:] = modmask
ncid.variables["rmu"][:] = rmu
ncid.close()
logger.info("Writing bathymetry plot to file newbathy.png")
figure = matplotlib.pyplot.figure(figsize=(8,8))
ax=figure.add_subplot(111)
P=ax.pcolormesh(newbathy)
figure.colorbar(P,norm=matplotlib.colors.LogNorm(vmin=newbathy.min(), vmax=newbathy.max()))
I,J=numpy.where(numpy.abs(modmask)>.1)
ax.scatter(J,I,20,"r")
figure.canvas.print_figure("newbathy.png")
# Print to HYCOM
abf.write_bathymetry("MERGED",0,newbathy,bathy_threshold)
setattr(args, self.dest, tmp)
class WindowParseAction(argparse.Action) :
def __call__(self, parser, args, values, option_string=None):
tmp = values.split(",")
tmp = [int(elem) for elem in tmp[0:4]]
setattr(args, self.dest, tmp)
parser = argparse.ArgumentParser(description='')
parser.add_argument('--filename', help="",nargs='+')
args = parser.parse_args()
print(args.filename)
#Example
#python ./interpolate_sstncof2TP5.py --filename ../ncof_sst/ncof_sst_20*.nc
gfile = abf.ABFileGrid("regional.grid","r")
plon=gfile.read_field("plon")
plat=gfile.read_field("plat")
gfile.close()
dpfile = abf.ABFileBathy("regional.depth","r",idm=gfile.idm,jdm=gfile.jdm)
depth=dpfile.read_field("depth")
dpfile.close()
target_lon=plon
target_lat=plat
target_lonlats = [target_lon,target_lat]
# compute for TPZ files
counter=0
file_count=0
if args.filename:
for ncfile0 in args.filename :
def main(lon1,
lat1,
lon2,
lat2,
variable,
files,
filetype="archive",
clim=None,
sectionid="",
ijspace=False,
xaxis="distance",
section_map=False,
dens=False,
dpi=180):
logger.info("Filetype is %s" % filetype)
gfile = abf.ABFileGrid("regional.grid", "r")
plon = gfile.read_field("plon")
plat = gfile.read_field("plat")
# Set up section info
if ijspace:
sec = gridxsec.SectionIJSpace([lon1, lon2], [lat1, lat2], plon, plat)
else:
sec = gridxsec.Section([lon1, lon2], [lat1, lat2], plon, plat)
I, J = sec.grid_indexes
dist = sec.distance
print('dit.shae=', dist.shape)
slon = sec.longitude
slat = sec.latitude
logger.info("Min max I-index (starts from 0):%d %d" % (I.min(), I.max()))
logger.info("Min max J-index (starts from 0):%d %d" % (J.min(), J.max()))
#
#
if section_map:
ll_lon = slon.min() - 10.
ur_lon = slon.max() + 10.
ll_lat = np.maximum(-90., slat.min() - 10.)
ur_lat = np.minimum(90., slat.max() + 10.)
proj = ccrs.Stereographic(central_latitude=90.0,
central_longitude=-40.0)
pxy = proj.transform_points(ccrs.PlateCarree(), plon, plat)
px = pxy[:, :, 0]
py = pxy[:, :, 1]
x, y = np.meshgrid(np.arange(slon.shape[0]), np.arange(slat.shape[0]))
figure = plt.figure(figsize=(10, 8))
ax = figure.add_subplot(111)
ax = plt.axes(projection=ccrs.PlateCarree())
ax.set_extent([-179, 179, 53, 85], ccrs.PlateCarree())
ax.add_feature(cfeature.GSHHSFeature('auto', edgecolor='grey'))
ax.add_feature(cfeature.GSHHSFeature('auto', facecolor='grey'))
ax.gridlines()
ax.plot(slon, slat, "r-", lw=1)
pos = ax.get_position()
asp = pos.height / pos.width
w = figure.get_figwidth()
h = asp * w
figure.set_figheight(h)
if sectionid:
figure.canvas.print_figure("map_%s.png" % sectionid, dpi=dpi)
else:
figure.canvas.print_figure("map.png", dpi=dpi)
# Get layer thickness variable used in hycom
dpname = modeltools.hycom.layer_thickness_variable[filetype]
logger.info("Filetype %s: layer thickness variable is %s" %
(filetype, dpname))
if xaxis == "distance":
x = dist / 1000.
xlab = "Distance along section[km]"
elif xaxis == "i":
x = I
xlab = "i-index"
elif xaxis == "j":
x = J
xlab = "j-index"
elif xaxis == "lon":
x = slon
xlab = "longitude"
elif xaxis == "lat":
x = slat
xlab = "latitude"
else:
logger.warning("xaxis must be i,j,lo,lat or distance")
x = dist / 1000.
xlab = "Distance along section[km]"
# Loop over archive files
figure = plt.figure()
ax = figure.add_subplot(111)
pos = ax.get_position()
for fcnt, myfile0 in enumerate(files):
# Remove [ab] ending if present
m = re.match("(.*)\.[ab]", myfile0)
if m:
myfile = m.group(1)
else:
myfile = myfile0
# Add more filetypes if needed. By def we assume archive
if filetype == "archive":
i_abfile = abf.ABFileArchv(myfile, "r")
elif filetype == "restart":
i_abfile = abf.ABFileRestart(myfile,
"r",
idm=gfile.idm,
jdm=gfile.jdm)
else:
raise NotImplementedError("Filetype %s not implemented" % filetype)
# kdm assumed to be max level in ab file
kdm = max(i_abfile.fieldlevels)
# Set up interface and daat arrays
xx = np.zeros((kdm + 1, I.size))
intfsec = np.zeros((kdm + 1, I.size))
datasec = np.zeros((kdm + 1, I.size))
if dens:
datasec_sal = np.zeros((kdm + 1, I.size))
sigma_sec = np.zeros((kdm + 1, I.size))
# Loop over layers in file.
logger.info("File %s" % (myfile))
for k in range(kdm):
logger.debug("File %s, layer %03d/%03d" % (myfile, k, kdm))
# Get 2D fields
dp2d = i_abfile.read_field(dpname, k + 1)
data2d = i_abfile.read_field(variable, k + 1)
dp2d = np.ma.filled(dp2d, 0.) / modeltools.hycom.onem
data2d = np.ma.filled(data2d, 1e30)
# Place data into section arrays
intfsec[k + 1, :] = intfsec[k, :] + dp2d[J, I]
if k == 0: datasec[k, :] = data2d[J, I]
datasec[k + 1, :] = data2d[J, I]
if dens:
data2d_sal = i_abfile.read_field('salin', k + 1)
data2d_sal = np.ma.filled(data2d_sal, 1e30)
datasec_sal[k + 1, :] = data2d_sal[J, I]
i_maxd = np.argmax(np.abs(intfsec[kdm, :]))
for k in range(kdm + 1):
xx[k, :] = x[:]
datasec = np.ma.masked_where(datasec > 0.5 * 1e30, datasec)
print("datasec min, max=", datasec.min(), datasec.max())
if dens:
datasec_sal = np.ma.masked_where(datasec_sal > 0.5 * 1e30,
datasec_sal)
print("datasec_sal min, max=", datasec_sal.min(),
datasec_sal.max())
sigma_sec = mod_hyc2plot.sig(datasec, datasec_sal)
sigma_sec = np.ma.masked_where(sigma_sec < 0.0, sigma_sec)
datasec = sigma_sec
# Set up section plot
datasec = np.ma.masked_where(datasec > 0.5 * 1e30, datasec)
print("min, max=", datasec.min(), datasec.max())
if clim is None:
clim = [datasec.min(), datasec.max()]
#clim=[0.0,13]
print("clim=", clim[0], clim[1])
if clim is not None:
lvls = MaxNLocator(nbins=70).tick_values(clim[0], clim[1])
mf = 'sawtooth_fc100.txt'
LinDic = mod_hyc2plot.cmap_dict(mf)
my_cmap = matplotlib.colors.LinearSegmentedColormap(
'my_colormap', LinDic)
cmap = my_cmap
norm = BoundaryNorm(lvls, ncolors=cmap.N, clip=True)
P = ax.contourf(xx, -intfsec, datasec, cmap=cmap, levels=lvls)
# Plot layer interfaces
for k in range(1, kdm + 1):
if k % 100 == 0:
PL = ax.plot(x, -intfsec[k, :], "-", color="k")
textx = x[i_maxd]
texty = -0.5 * (intfsec[k - 1, i_maxd] + intfsec[k, i_maxd])
ax.text(textx,
texty,
str(k),
verticalalignment="center",
horizontalalignment="center",
fontsize=6)
elif k % 5 == 0:
PL = ax.plot(x, -intfsec[k, :], "--", color="k", linewidth=0.5)
textx = x[i_maxd]
texty = -0.5 * (intfsec[k - 1, i_maxd] + intfsec[k, i_maxd])
ax.text(textx,
texty,
str(k),
verticalalignment="center",
horizontalalignment="center",
fontsize=6)
else:
if k > 2 and k % 2 == 0:
PL = ax.plot(x,
-intfsec[k, :],
"-",
color=".5",
linewidth=0.5)
textx = x[i_maxd]
texty = -0.5 * (intfsec[k - 1, i_maxd] +
intfsec[k, i_maxd])
ax.text(textx,
texty,
str(k),
verticalalignment="center",
horizontalalignment="center",
fontsize=6)
else:
continue
# Print figure
ax.set_facecolor('xkcd:gray')
aspect = 90
pad_fraction = 0.25
divider = make_axes_locatable(ax)
width = axes_size.AxesY(ax, aspect=1. / aspect)
pad = axes_size.Fraction(pad_fraction, width)
cax = divider.append_axes("right", size=width, pad=pad)
cb = ax.figure.colorbar(P, cax=cax)
if clim is not None: P.set_clim(clim)
if dens:
ax.set_title('[P. density ]: ' + myfile)
else:
ax.set_title('[' + variable + ']: ' + myfile)
ax.set_ylabel('Depth [m]')
ax.set_xlabel(xlab)
# Print in different y-lims
suff = os.path.basename(myfile)
if sectionid: suff = suff + "_" + sectionid
if dens: variable = "dens"
figure.canvas.print_figure("sec_%s_full_%s.png" % (variable, suff),
dpi=dpi)
ax.set_ylim(-1000, 0)
figure.canvas.print_figure("sec_%s_1000m_%s.png" % (variable, suff),
dpi=dpi)
# Close input file
i_abfile.close()
#
ax.clear()
cb.remove()
def main(lon1,lat1,lon2,lat2,variable,files,filetype="archive",clim=None,sectionid="",
ijspace=False,xaxis="distance",section_map=False,ncfiles="",dpi=180) :
#TP4Grd='/cluster/work/users/aal069/TP4a0.12/mfile/'
logger.info("Filetype is %s"% filetype)
gfile = abf.ABFileGrid("regional.grid","r")
plon=gfile.read_field("plon")
plat=gfile.read_field("plat")
# Set up section info
if ijspace :
sec = gridxsec.SectionIJSpace([lon1,lon2],[lat1,lat2],plon,plat)
else :
sec = gridxsec.Section([lon1,lon2],[lat1,lat2],plon,plat)
I,J=sec.grid_indexes
dist=sec.distance
print('dit.shae=',dist.shape)
slon=sec.longitude
slat=sec.latitude
# In testing
#J,I,slon,slat,case,dist=sec.find_intersection(qlon,qlat)
#print I,J
#raise NameError,"test"
logger.info("Min max I-index (starts from 0):%d %d"%(I.min(),I.max()))
logger.info("Min max J-index (starts from 0):%d %d"%(J.min(),J.max()))
#
#
if section_map :
ll_lon=slon.min()-10.
ur_lon=slon.max()+10.
ll_lat=np.maximum(-90.,slat.min()-10.)
ur_lat=np.minimum(90. ,slat.max()+10.)
proj=ccrs.Stereographic(central_latitude=90.0,central_longitude=-40.0)
#pxy = proj.transform_points(ccrs.PlateCarree(), plon, plat)
#px=pxy[:,:,0]
#py=pxy[:,:,1]
#x,y=np.meshgrid(np.arange(slon.shape[0]),np.arange(slat.shape[0]))
figure =plt.figure(figsize=(8,8))
ax=figure.add_subplot(111,projection=proj)
#ax = plt.axes(projection=ccrs.PlateCarree())
ax.set_extent([-179, 179, 53, 85],ccrs.PlateCarree())
#ax = plt.axes(projection=ccrs.Stereographic())
ax.add_feature(cfeature.GSHHSFeature('auto', edgecolor='grey'))
ax.add_feature(cfeature.GSHHSFeature('auto', facecolor='grey'))
ax.gridlines()
#ax.coastlines(resolution='110m')
ax.plot(slon,slat,"r-",lw=1,transform=ccrs.PlateCarree())
pos = ax.get_position()
asp=pos.height/pos.width
w=figure.get_figwidth()
h=asp*w
figure.set_figheight(h)
if sectionid :
figure.canvas.print_figure("map_%s.png"%sectionid,dpi=dpi,bbox_inches='tight')
else :
figure.canvas.print_figure("map.png",dpi=dpi,bbox_inches='tight')
# Get layer thickness variable used in hycom
dpname = modeltools.hycom.layer_thickness_variable[filetype]
logger.info("Filetype %s: layer thickness variable is %s"%(filetype,dpname))
if xaxis == "distance" :
x=dist/1000.
xlab="Distance along section[km]"
elif xaxis == "i" :
x=I
xlab="i-index"
elif xaxis == "j" :
x=J
xlab="j-index"
elif xaxis == "lon" :
x=slon
xlab="longitude"
elif xaxis == "lat" :
x=slat
xlab="latitude"
else :
logger.warning("xaxis must be i,j,lo,lat or distance")
x=dist/1000.
xlab="Distance along section[km]"
# get kdm from the first file:
# Remove [ab] ending if present
print('firstfilw', files[0])
m=re.match("(.*)\.[ab]",files[0])
print('m=',m.group(1))
myf=m.group(1)
fi_abfile = abf.ABFileArchv(myf,"r")
kdm=max(fi_abfile.fieldlevels)
# Loop over archive files
figure = plt.figure()
ax=figure.add_subplot(111)
pos = ax.get_position()
count_sum=0
intfsec_sum=np.zeros((kdm+1,I.size))
datasec_sum=np.zeros((kdm+1,I.size))
for fcnt,myfile0 in enumerate(files) :
count_sum=count_sum+1
print('count_sum==', count_sum)
print('fcnt=', fcnt)
print('mfile0=', myfile0)
# Remove [ab] ending if present
m=re.match("(.*)\.[ab]",myfile0)
if m :
myfile=m.group(1)
else :
myfile=myfile0
# Add more filetypes if needed. By def we assume archive
if filetype == "archive" :
i_abfile = abf.ABFileArchv(myfile,"r")
elif filetype == "restart" :
i_abfile = abf.ABFileRestart(myfile,"r",idm=gfile.idm,jdm=gfile.jdm)
else :
raise NotImplementedError("Filetype %s not implemented"%filetype)
# kdm assumed to be max level in ab file
kdm=max(i_abfile.fieldlevels)
# Set up interface and daat arrays
xx=np.zeros((kdm+1,I.size))
intfsec=np.zeros((kdm+1,I.size))
datasec=np.zeros((kdm+1,I.size))
# Loop over layers in file.
logger.info("File %s"%(myfile))
for k in range(kdm) :
logger.debug("File %s, layer %03d/%03d"%(myfile,k,kdm))
# Get 2D fields
dp2d=i_abfile.read_field(dpname,k+1)
data2d=i_abfile.read_field(variable,k+1)
#print('---mn,mx data=', data2d.min(),data2d.max())
if (k%kdm==49):
print("---Reach bottom layer" )
dp2d=np.ma.filled(dp2d,0.)/modeltools.hycom.onem
data2d=np.ma.filled(data2d,1e30)
# Place data into section arrays
intfsec[k+1,:] = intfsec[k,:] + dp2d[J,I]
if k==0 : datasec[k,:] = data2d[J,I]
datasec[k+1,:] = data2d[J,I]
intfsec_sum=intfsec_sum + intfsec
datasec_sum=datasec_sum + datasec
#print 'prs_intafce=', np.transpose(intfsec[:,15])
i_abfile.close()
# end loop over files
intfsec_avg=intfsec_sum/count_sum
datasec_avg=datasec_sum/count_sum
if ncfiles :
MLDGS_sum=np.zeros((1,I.size))
count_sum=0
for fcnt,ncfile in enumerate(ncfiles) :
count_sum=count_sum+1
print('ncfile count_sum==', count_sum)
print('ncfile fcnt=', fcnt)
print('ncfilefile=', ncfile)
MLDGS=np.zeros((1,I.size))
ncfile0 = netCDF4.Dataset(ncfile,'r')
MLD_2D = ncfile0.variables['GS_MLD'][:]
#MLD_2D = ncfile0.variables['mlp'][:]
MLDGS[0,:]=MLD_2D[0,J,I]
MLDGS_sum= MLDGS_sum + MLDGS
ncfile0.close()
# end loop over files
MLDGS_avg=MLDGS_sum/count_sum
#
#-----------------------------------------------------------------
# read from clim mld TP5netcdf
if ncfiles :
if 'TP2' in files[0]:
fh=netCDF4.Dataset('mld_dr003_l3_modif_Interp_TP2grd.nc')
else:
fh=netCDF4.Dataset('mld_dr003_l3_modif_Interp_TP5grd.nc')
fhmldintrp = fh.variables['TP5mld'][:]
fh.close()
#fhMLDintrp_sum=np.zeros((760,800))
MLDclim_sum=np.zeros((1,I.size))
cunt_sum=0
for ii in range(12) :
cunt_sum=cunt_sum +1
MLDclim=np.zeros((1,I.size))
MLDclim[0,:]=fhmldintrp[ii,J,I]
MLDclim_sum= MLDclim_sum + MLDclim
print('clim count_sum==', cunt_sum)
MLDclim_avg=MLDclim_sum/cunt_sum
#-----------------------------------------------------------------
i_maxd=np.argmax(np.abs(intfsec_avg[kdm,:]))
#print i_maxd
for k in range(kdm+1) :
xx[k,:] = x[:]
# Set up section plot
#datasec = np.ma.masked_where(datasec==1e30,datasec)
datasec_avg = np.ma.masked_where(datasec_avg>0.5*1e30,datasec_avg)
#print datasec.min(),datasec.max()
#P=ax.pcolormesh(dist/1000.,-intfsec,datasec)
#print i_maxd
for k in range(kdm+1) :
xx[k,:] = x[:]
if clim is not None : lvls = MaxNLocator(nbins=30).tick_values(clim[0], clim[1])
#print 'levels=', lvls
mf='sawtooth_0-1.txt'
LinDic=mod_hyc2plot.cmap_dict(mf)
my_cmap = matplotlib.colors.LinearSegmentedColormap('my_colormap',LinDic)
cmap=my_cmap
#cmap = matplotlib.pyplot.get_cmap('gist_rainbow_r')
norm = BoundaryNorm(lvls, ncolors=cmap.N, clip=True)
print('x.shape=' , x.shape)
print('x.min,xmax=' , x.min(),x.max())
print('xx.shape=' , xx.shape)
print('xx.min,xxmax=' , xx.min(),xx.max())
print('intfsec_avg.shape=', intfsec_avg.shape)
print('datasec_avg.shape=', datasec_avg.shape)
#P=ax.pcolormesh(x,-intfsec,datasec,cmap=cmap)
P=ax.contourf(xx,-intfsec_avg,datasec_avg,extend='both',cmap=cmap,levels=lvls)
if 'sal' in variable:
P1=ax.contour(xx,-intfsec_avg,datasec_avg,levels=[32.0,33.0,34.0,35.0,35.5],
colors=('k',),linestyles=('-',),linewidths=(1.5,))
else:
P1=ax.contour(xx,-intfsec_avg,datasec_avg,levels=[-1,0.0,2.0],
colors=('k',),linestyles=('-',),linewidths=(1.5,))
matplotlib.pyplot.clabel(P1, fmt = '%2.1d', colors = 'k', fontsize=10) #contour line labels
# Plot layer interfaces
for k in range(1,kdm+1) :
if k%100 == 0 :
PL=ax.plot(x,-intfsec_avg[k,:],"-",color="k")
elif k%5 == 0 and k <= 10:
PL=ax.plot(x,-intfsec_avg[k,:],"--",color="k", linewidth=0.5)
textx = x[i_maxd]
texty = -0.5*(intfsec_avg[k-1,i_maxd] + intfsec_avg[k,i_maxd])
ax.text(textx,texty,str(k),verticalalignment="center",horizontalalignment="center",fontsize=6)
elif k%2 and k > 10 :
PL=ax.plot(x,-intfsec_avg[k,:],"--",color="k", linewidth=0.5)
textx = x[i_maxd]
texty = -0.5*(intfsec_avg[k-1,i_maxd] + intfsec_avg[k,i_maxd])
ax.text(textx,texty,str(k),verticalalignment="center",horizontalalignment="center",fontsize=6)
if ncfiles :
PL=ax.plot(x,-MLDGS_avg[0,:],"-",color="w", linewidth=1.50)
PL=ax.plot(x,-MLDclim_avg[0,:],"--",color="r", linewidth=1.50)
### else :
### PL=ax.plot(x,-intfsec_avg[k,:],"-",color=".5")
# Print figure and remove wite space.
aspect = 50
pad_fraction = 0.25
divider = make_axes_locatable(ax)
width = axes_size.AxesY(ax, aspect=1./aspect)
pad = axes_size.Fraction(pad_fraction, width)
cax = divider.append_axes("right", size=width, pad=pad)
cb=ax.figure.colorbar(P,cax=cax,extend='both')
#cb=ax.figure.colorbar(P,extend='both')
if clim is not None : P.set_clim(clim)
#cb=ax.figure.colorbar(P,extend='both')
ax.set_title(variable+':'+myfile+'AVG-')
ax.set_ylabel('Depth [m]')
ax.set_xlabel(xlab)
#ax.set_position(pos)
#matplotlib.pyplot.tight_layout()
# Print in different y-lims
suff=os.path.basename(myfile)
if sectionid : suff=suff+"_"+sectionid
figure.canvas.print_figure("sec_AVG_%s_full_%s.png"%(variable,suff),dpi=dpi)
#ax.set_ylim(-1000,0)
if 'Fram' in sectionid or 'Svin' in sectionid:
print('sectionid=', sectionid)
ax.set_ylim(-600,0)
figure.canvas.print_figure("sec_AVG_%s_600m_%s.png"%(variable,suff),dpi=dpi)
else:
#ax.set_ylim(-2500,0)
#figure.canvas.print_figure("sec_AVG_%s_2500m_%s.png"%(variable,suff),dpi=dpi)
ax.set_ylim(-3000,0)
figure.canvas.print_figure("sec_AVG_%s_3000m_%s.png"%(variable,suff),dpi=dpi)
# Close input file
#i_abfile.close()
#
ax.clear()
cb.remove()
def main(path, source_file):
print(path)
print(source_file)
nc = NetCDFFile(source_file, "r")
wetNOy = nc.variables["WDEP_NOy"][:, :]
wetNHx = nc.variables["WDEP_NHx"][:, :]
dryNOy = nc.variables["DDEP_NOy_m2Grid"][:, :]
dryNHx = nc.variables["DDEP_NHx_m2Grid"][:, :]
lat = nc.variables["lat"][:]
lon = nc.variables["lon"][:]
Nread = wetNOy + wetNHx + dryNOy + dryNHx
abgrid = abf.ABFileGrid(path + "../../../topo/regional.grid", "r")
plon = abgrid.read_field("plon")
plat = abgrid.read_field("plat")
jdm, idm = plon.shape
xi, yi = np.meshgrid(lon, lat)
N = griddata((xi.flatten(), yi.flatten()),
Nread.flatten(), (plon, plat),
method='linear')
N[np.isnan(N)] = 0.
N = N / 365. / 86400. # year --> second
N = N / 14.01 * 6.625 * 12.01 # mgN m-2 s-1 --> mgC m-2 s-1
outfile=abf.ABFileRiver(path + "ECO_no3_new.a","w",idm=idm,jdm=jdm,\
cline1='River nitrate fluxes + Atmospheric N deposition',\
cline2='mgC m-2 s-1')
outfile.write_header()
Nriver = abf.AFile(idm, jdm, path + "ECO_no3.a", "r")
for month in range(12):
river = Nriver.read_record(month)
outfile.write_field(river + N, None, "river nitrate", month + 1)
Nriver.close()
outfile.close()
origAfile = path + "ECO_no3.a"
origBfile = path + "ECO_no3.b"
oldAfile = path + "ECO_no3_noATM.a"
oldBfile = path + "ECO_no3_noATM.b"
newAfile = path + "ECO_no3_new.a"
newBfile = path + "ECO_no3_new.b"
os.rename(origAfile, oldAfile
) # river without atmpspheric deposition is kept as noATM file.
os.rename(origBfile, oldBfile
) # river without atmpspheric deposition is kept as noATM file.
os.rename(
newAfile, origAfile
) # river with atmospheric deposition is renamed to the original file used by hycom
os.rename(
newBfile, origBfile
) # river with atmospheric deposition is renamed to the original file used by hycom
# according to Okin et al, 2011 - doi:10.1029/2010GB003858
# for North Atlantic (northern section)
# Ndep = 7.4 TgN/yr
# Pdep = 0.02 TgP/yr
# ratio --> ( 7.4 / 14.01 * 6.625 ) / ( 0.02 / 31. * 106. ) = 51.2
P = N / 51.2
outfile=abf.ABFileRiver(path + "ECO_pho_new.a","w",idm=idm,jdm=jdm,\
cline1='River phosphate fluxes + Atmospheric P deposition',\
cline2='mgC m-2 s-1')
outfile.write_header()
Priver = abf.AFile(idm, jdm, path + "ECO_pho.a", "r")
for month in range(12):
river = Priver.read_record(month)
outfile.write_field(river + P, None, "river phosphate", month + 1)
Priver.close()
outfile.close()
origAfile = path + "ECO_pho.a"
origBfile = path + "ECO_pho.b"
oldAfile = path + "ECO_pho_noATM.a"
oldBfile = path + "ECO_pho_noATM.b"
newAfile = path + "ECO_pho_new.a"
newBfile = path + "ECO_pho_new.b"
os.rename(origAfile, oldAfile
) # river without atmpspheric deposition is kept as noATM file.
os.rename(origBfile, oldBfile
) # river without atmpspheric deposition is kept as noATM file.
os.rename(
newAfile, origAfile
) # river with atmospheric deposition is renamed to the original file used by hycom
os.rename(
newBfile, origBfile
) # river with atmospheric deposition is renamed to the original file used by hycom
'''
def main():
# Read plon,plat
gfile = abf.ABFileGrid("regional.grid", "r")
plon = gfile.read_field("plon")
plat = gfile.read_field("plat")
gfile.close()
# Read input bathymetry
bfile = abf.ABFileBathy("regional.depth",
"r",
idm=gfile.idm,
jdm=gfile.jdm,
mask=True)
in_depth_m = bfile.read_field("depth")
bfile.close()
#in_depth=numpy.ma.filled(in_depth_m,bathy_threshold)
# Starting point (State 1 for Atlantic)
kapref = numpy.ones(plat.shape) * 1.0
print kapref.min(), kapref.max()
# Find regions north of northern limit. Assumes
for segment in range(len(northern_limit_longitudes)):
ind1 = segment
ind2 = (segment + 1) % len(northern_limit_longitudes)
lo1 = northern_limit_longitudes[ind1]
la1 = northern_limit_latitudes[ind1]
lo2 = northern_limit_longitudes[ind2]
la2 = northern_limit_latitudes[ind2]
tmp1 = numpy.mod(plon + 360 - lo1, 360.)
tmp2 = numpy.mod(lo2 + 360 - lo1, 360.)
J = tmp1 <= tmp2
#print numpy.count_nonzero(J)
# Linear weights and latitude in selected points
w2 = tmp1 / tmp2
w1 = 1. - w2
la = la2 * w2 + la1 * w1
kapref[J] = numpy.where(plat[J] > la[J], 2.0, kapref[J])
import scipy.ndimage
kapref = scipy.ndimage.gaussian_filter(kapref, sigma=20)
#print in_depth_m.min(),type(in_depth_m)
kaprefplot = numpy.ma.masked_where(in_depth_m.mask, kapref)
figure = matplotlib.pyplot.figure()
ax = figure.add_subplot(111)
P = ax.pcolormesh(kaprefplot)
figure.colorbar(P, ax=ax)
figure.canvas.print_figure("kapref.png")
af = abf.AFile(plon.shape[1], plon.shape[0], "tbaric.a", "w")
hmin, hmax = af.writerecord(kapref, None, record=0)
af.close()
bf = open("tbaric.b", "w")
bf.write("tbaric.b\n")
bf.write("\n")
bf.write("\n")
bf.write("\n")
bf.write("i/jdm = %5d %5d\n" % (plon.shape[1], plon.shape[0]))
bf.write("tbaric: range = %14.6e%14.6e\n" % (hmin, hmax))
bf.close()
def main(infile, rmu_width, rmu_efold, dpi=180):
bathy_threshold = 0. # TODO
# Read plon,plat
gfile = abf.ABFileGrid("regional.grid", "r")
plon = gfile.read_field("plon")
plat = gfile.read_field("plat")
gfile.close()
# Read input bathymetri
m = re.match("^(.*)(\.[ab])", infile)
if m: infile = m.group(1)
bfile = abf.ABFileBathy(infile,
"r",
idm=gfile.idm,
jdm=gfile.jdm,
mask=True)
in_depth_m = bfile.read_field("depth")
bfile.close()
in_depth = numpy.ma.filled(in_depth_m, bathy_threshold)
#print in_depth.min(),in_depth.max()
ip = ~in_depth_m.mask
ip = numpy.copy(ip)
iu = numpy.copy(ip)
iv = numpy.copy(ip)
iu[:, 1:] = numpy.logical_and(ip[:, 1:], ip[:, :-1])
iv[1:, :] = numpy.logical_and(ip[1:, :], ip[:-1, :])
ifports = []
ilports = []
jfports = []
jlports = []
kdports = []
process_south = True
process_north = True
process_west = True
process_east = True
fatal = False
rmumask = numpy.zeros(in_depth.shape)
labels = numpy.zeros(in_depth.shape)
# Test ocean mask in 2nd grid cell from edge. If ocean, mark as nesting boundary.
# When written to ports.input, we write
# NB: All diag output is "Fortran" indexes (Starting from 1) - thats why we add 1 here and there
for kdport in [1, 2, 3, 4]:
t_ifports, t_ilports, t_jfports, t_jlports, t_kdports, t_labels, = port_setup(
kdport, in_depth_m)
labels[t_labels > 0] = t_labels[t_labels > 0] + labels.max()
ifports.extend(t_ifports)
ilports.extend(t_ilports)
jfports.extend(t_jfports)
jlports.extend(t_jlports)
kdports.extend(t_kdports)
# Build mask
for i in range(len(ifports)):
rmumask = relaxation_mask(rmumask, ifports[i], ilports[i], jfports[i],
jlports[i], kdports[i], rmu_width)
#print rmumask.min(),rmumask.max()
rmumask = numpy.minimum(rmumask, 1.) * 1. / (rmu_efold * 86400.)
rmumask_m = numpy.ma.masked_where(in_depth_m.mask, rmumask)
# Check consistency
fatal = False
for i in range(len(ifports)):
fatal = fatal or check_consistency(ifports[i], ilports[i], jfports[i],
jlports[i], kdports[i], iu, iv,
i + 1)
# Open port output file
logger.info("Writing to ports.input.tmp")
fid = open("ports.input.tmp", "w")
fid.write("%6d 'nports' = Number of ports \n" % len(kdports))
for i in range(len(kdports)):
write_port_location(fid, kdports[i], ifports[i] + 1, ilports[i] + 1,
jfports[i] + 1, jlports[i] + 1)
fid.close()
# Write rmu file
rmufile = abf.ABFileRmu(
"rmu",
"w",
cline1="Relaxation mask",
cline2=
"Relaxation mask created by topo_ports.py. rel zone width=%d, efold time=%d days"
% (rmu_width, rmu_efold),
mask=True)
rmufile.write_field(rmumask, in_depth_m.mask, "rmu")
rmufile.close()
# Plot rmu with pcolormesh
figure = matplotlib.pyplot.figure(figsize=(8, 8))
ax = figure.add_subplot(111)
cmap = matplotlib.pyplot.get_cmap("Greys_r")
cmap2 = matplotlib.pyplot.get_cmap("jet")
ax.add_patch(
matplotlib.patches.Rectangle((1, 1),
in_depth.shape[1],
in_depth.shape[0],
color=".5",
alpha=.5))
P = ax.pcolormesh(in_depth_m, cmap=cmap)
P = ax.pcolormesh(rmumask_m, cmap=cmap2)
CB = ax.figure.colorbar(P)
figure.canvas.print_figure("rmu.png", dpi=dpi)
# Plot ports with pcolormesh
figure = matplotlib.pyplot.figure(figsize=(8, 8))
ax = figure.add_subplot(111)
cmap = matplotlib.pyplot.get_cmap("Greys_r")
ax.add_patch(
matplotlib.patches.Rectangle((1, 1),
in_depth.shape[1],
in_depth.shape[0],
color=".5",
alpha=.5))
P = ax.pcolormesh(in_depth_m, cmap=cmap)
I, J = numpy.where(labels > 0)
S = ax.scatter(J, I, 50, labels[I, J], edgecolor='none')
CB = ax.figure.colorbar(S)
ax.set_xlim(0, in_depth.shape[1])
ax.set_ylim(0, in_depth.shape[0])
CB.ax.set_title("Port number")
logger.info("Writing to ports_all.png")
figure.canvas.print_figure("ports_all.png", dpi=dpi)
# Port diagnostics plot
figure2 = matplotlib.pyplot.figure(figsize=(8, 8))
ax2 = figure2.add_subplot(111)
cmap = matplotlib.pyplot.get_cmap("Greys_r")
P = ax2.pcolormesh(in_depth_m,
cmap=cmap,
edgecolor=".4",
alpha=.5,
linewidth=.05)
ax2.hold()
Ps = []
Ls = []
for i in range(len(kdports)):
iwidth = ilports[i] - ifports[i] + 1
jwidth = jlports[i] - jfports[i] + 1
#print ifports[i],jfports[i],iwidth,jwidth
d = 1
if kdports[i] == 1:
xy = (ifports[i], jfports[i])
jwidth = d
c = "r"
elif kdports[i] == 2:
xy = (ifports[i], jfports[i])
jwidth = d
c = "g"
elif kdports[i] == 3:
xy = (ifports[i], jfports[i])
iwidth = d
c = "b"
elif kdports[i] == 4:
xy = (ifports[i], jfports[i])
iwidth = d
c = "m"
figure.clf()
ax = figure.add_subplot(111)
P = ax.pcolormesh(in_depth_m,
cmap=cmap,
edgecolor=".4",
alpha=.5,
linewidth=.05)
ax.add_patch(
matplotlib.patches.Rectangle(xy, iwidth, jwidth, color=c,
alpha=.5))
ax.grid()
ax.set_xlim(xy[0] - 20, xy[0] + iwidth + 20)
ax.set_ylim(xy[1] - 20, xy[1] + jwidth + 20)
ax.set_title("Port number %d - kdport=%d" % (i + 1, kdports[i]))
R = ax2.add_patch(
matplotlib.patches.Rectangle(xy, iwidth, jwidth, color=c,
alpha=.5))
Ps.append(R)
Ls.append("Port %d" % (i + 1))
fname = "port_%03d.png" % (i + 1)
logger.info("Writing Diagnostics to %s" % fname)
figure.canvas.print_figure(fname, bbox_inches='tight', dpi=dpi)
fname = "ports_all_2.png"
logger.info("Writing Diagnostics to %s" % fname)
ax2.legend(Ps, Ls)
figure2.canvas.print_figure(fname, bbox_inches='tight', dpi=dpi)
if fatal:
logger.error(
"Errors were encountered - see errors above, and consult diag files. You may need to modify your topo file"
)
raise NameError("fatal exit")
return rmumask, rmumask_m
def main(lon1,lat1,lon2,lat2,variable,files,filetype="archive",clim=None,sectionid="",
ijspace=False,xaxis="distance",section_map=False,dpi=180) :
TP4Grd='/cluster/work/users/aal069/TP4a0.12/mfile/'
logger.info("Filetype is %s"% filetype)
gfile = abf.ABFileGrid("regional.grid","r")
plon=gfile.read_field("plon")
plat=gfile.read_field("plat")
# Set up section info
if ijspace :
sec = gridxsec.SectionIJSpace([lon1,lon2],[lat1,lat2],plon,plat)
else :
sec = gridxsec.Section([lon1,lon2],[lat1,lat2],plon,plat)
I,J=sec.grid_indexes
dist=sec.distance
print('dit.shae=',dist.shape)
slon=sec.longitude
slat=sec.latitude
# In testing
#J,I,slon,slat,case,dist=sec.find_intersection(qlon,qlat)
#print I,J
#raise NameError,"test"
logger.info("Min max I-index (starts from 0):%d %d"%(I.min(),I.max()))
logger.info("Min max J-index (starts from 0):%d %d"%(J.min(),J.max()))
#
#
if section_map :
ll_lon=slon.min()-10.
ur_lon=slon.max()+10.
ll_lat=np.maximum(-90.,slat.min()-10.)
ur_lat=np.minimum(90. ,slat.max()+10.)
proj=ccrs.Stereographic(central_latitude=90.0,central_longitude=-40.0)
#pxy = proj.transform_points(ccrs.PlateCarree(), plon, plat)
#px=pxy[:,:,0]
#py=pxy[:,:,1]
#x,y=np.meshgrid(np.arange(slon.shape[0]),np.arange(slat.shape[0]))
figure =plt.figure(figsize=(8,8))
ax=figure.add_subplot(111,projection=proj)
#ax = plt.axes(projection=ccrs.PlateCarree())
ax.set_extent([-179, 179, 53, 85],ccrs.PlateCarree())
#ax = plt.axes(projection=ccrs.Stereographic())
ax.add_feature(cfeature.GSHHSFeature('auto', edgecolor='grey'))
ax.add_feature(cfeature.GSHHSFeature('auto', facecolor='grey'))
ax.gridlines()
#ax.coastlines(resolution='110m')
ax.plot(slon,slat,"r-",lw=1,transform=ccrs.PlateCarree())
pos = ax.get_position()
asp=pos.height/pos.width
w=figure.get_figwidth()
h=asp*w
figure.set_figheight(h)
if sectionid :
figure.canvas.print_figure("map_%s.png"%sectionid,dpi=dpi,bbox_inches='tight')
else :
figure.canvas.print_figure("map.png",dpi=dpi,bbox_inches='tight')
# Get layer thickness variable used in hycom
dpname = modeltools.hycom.layer_thickness_variable[filetype]
logger.info("Filetype %s: layer thickness variable is %s"%(filetype,dpname))
if xaxis == "distance" :
x=dist/1000.
xlab="Distance along section[km]"
elif xaxis == "i" :
x=I
xlab="i-index"
elif xaxis == "j" :
x=J
xlab="j-index"
elif xaxis == "lon" :
x=slon
xlab="longitude"
elif xaxis == "lat" :
x=slat
xlab="latitude"
else :
logger.warning("xaxis must be i,j,lo,lat or distance")
x=dist/1000.
xlab="Distance along section[km]"
# get kdm from the first file:
# Remove [ab] ending if present
myfile0=files[0]
print( 'myfile0', myfile0)
m=re.match("(.*)\.[ab]",myfile0)
print('m=',m.group(1))
if m :
myfile=m.group(1)
else :
myfile=myfile0
dta_afile = abf.AFile(gfile.idm,gfile.jdm,myfile0,"r")
#intfl='../../../relax/010/relax_int.a'
intfl=myfile[:-3] + 'int.a'
int_afile = abf.AFile(gfile.idm,gfile.jdm,intfl,"r")
#
lyr=1
#record_num,xmn,xmx=dta_afile.get_record_number(variable,lyr)
#print 'record_num, variable, layer ===', record_num-1, variable, lyr
#print 'mn,mx=',xmn,xmx
# for record in record_num :
record_num=1
record_var=record_num-1
fld = dta_afile.read_record(record_var)
print('mn,mx data=',fld.min(),fld.max())
#np.testing.assert_approx_equal(xmn,fld.min(),significant=8)
#np.testing.assert_approx_equal(xmx,fld.max(),significant=8)
# presure interfc
#record_num,xmn,xmx=int_afile.get_record_number('int',lyr)
#print 'record_num, variable, layer ===', record_num-1, 'int', lyr
#print 'mn,mx=',xmn,xmx
# for record in record_num :
record_prs=record_num-1
fld = int_afile.read_record(record_prs)
print('mn,mx intface=',fld.min(),fld.max())
#np.testing.assert_approx_equal(xmn,fld.min(),significant=8)
#np.testing.assert_approx_equal(xmx,fld.max(),significant=8)
#
#kdm=max(fi_abfile.fieldlevels)
kdm=50
# Loop over archive files
figure = plt.figure()
ax=figure.add_subplot(111)
pos = ax.get_position()
count_sum=0
intfsec_sum=np.zeros((kdm+1,I.size))
datasec_sum=np.zeros((kdm+1,I.size))
#
for mnth in range(12) :
count_sum=count_sum+1
logger.info("Reading data and presure interface for month %s"%(mnth+1))
record_var_pnt=record_var + mnth*kdm
record_prs_pnt=record_prs + mnth*kdm
print('pointing at record num: record_var_pnt', record_var_pnt)
print('pointing at record num: record_prs_pnt', record_prs_pnt)
# Set up interface and daat arrays
xx=np.zeros((kdm+1,I.size))
intfsec=np.zeros((kdm+1,I.size))
datasec=np.zeros((kdm+1,I.size))
# Loop over layers in file.
logger.info("File %s"%(myfile))
logger.info("intfac_File %s"%(intfl))
#loop over 50 records
for k in range(kdm) :
logger.debug("File %s, layer %03d/%03d"%(myfile,k,kdm))
r_var=record_var_pnt+k
r_prs=record_prs_pnt+k
# Get 2D fields
dp2d = int_afile.read_record(r_prs)
data2d=dta_afile.read_record(r_var)
#print('reading rec num: r_var,r_dp=', r_var, r_prs,' ','data.min,data.max=',data2d.min(),data2d.max())
print('data: month,layer, range', (mnth+1),'',(r_var)%kdm,data2d.min(),data2d.max())
#dp2d=i_abfile.read_field(dpname,k+1)
#data2d=i_abfile.read_field(variable,k+1)
if ((r_var)%kdm==49):
print('mn,mx intface=',dp2d.min(),dp2d.max())
print('mn,mx data=', data2d.min(),data2d.max())
print( "Reach bottom layer" )
dp2d=np.ma.filled(dp2d,0.)/modeltools.hycom.onem
data2d=np.ma.filled(data2d,1e30)
# Place data into section arrays
#intfsec[k+1,:] = intfsec[k,:] + dp2d[J,I]
#print("data2d.shape=",data2d.shape)
#print("data2d[J,I].size=",data2d[J,I].size)
intfsec[k+1,:] = dp2d[J,I]
if k==0 : datasec[k,:] = data2d[J,I]
datasec[k+1,:] = data2d[J,I]
intfsec_sum=intfsec_sum + intfsec
datasec_sum=datasec_sum + datasec
#print 'prs_intafce=', np.transpose(intfsec[:,15])
dta_afile.close()
int_afile.close()
# end loop over files
print ('count_sum=',count_sum)
intfsec_avg=intfsec_sum/count_sum
datasec_avg=datasec_sum/count_sum
#
i_maxd=np.argmax(np.abs(intfsec_avg[kdm,:]))
#print i_maxd
for k in range(kdm+1) :
xx[k,:] = x[:]
# Set up section plot
#datasec = np.ma.masked_where(datasec==1e30,datasec)
datasec_avg = np.ma.masked_where(datasec_avg>0.5*1e30,datasec_avg)
#print datasec.min(),datasec.max()
#P=ax.pcolormesh(dist/1000.,-intfsec,datasec)
#print i_maxd
for k in range(kdm+1) :
xx[k,:] = x[:]
if clim is not None : lvls = MaxNLocator(nbins=30).tick_values(clim[0], clim[1])
#print 'levels=', lvls
mf='sawtooth_0-1.txt'
LinDic=mod_hyc2plot.cmap_dict(mf)
my_cmap = matplotlib.colors.LinearSegmentedColormap('my_colormap',LinDic)
cmap=my_cmap
#cmap = plt.get_cmap('gist_rainbow_r')
norm = BoundaryNorm(lvls, ncolors=cmap.N, clip=True)
print('x.shape=' , x.shape)
print('x.min,xmax=' , x.min(),x.max())
print('xx.shape=' , xx.shape)
print('xx.min,xxmax=' , xx.min(),xx.max())
print('intfsec_avg.shape=', intfsec_avg.shape)
print('datasec_avg.shape=', datasec_avg.shape)
#P=ax.pcolormesh(x,-intfsec,datasec,cmap=cmap)
P=ax.contourf(xx,-intfsec_avg,datasec_avg,extend='both',cmap=cmap,levels=lvls)
if 'sal' in variable:
P1=ax.contour(xx,-intfsec_avg,datasec_avg,levels=[32.0,33.0,34.0,35.0,35.5],
colors=('k',),linestyles=('-',),linewidths=(1.5,))
else:
P1=ax.contour(xx,-intfsec_avg,datasec_avg,levels=[-1.0,0.0,2.0],
colors=('k',),linestyles=('-',),linewidths=(1.5,))
plt.clabel(P1, fmt = '%2.1d', colors = 'k', fontsize=10) #contour line labels
# Plot layer interfaces
for k in range(1,kdm+1) :
if k%100 == 0 :
PL=ax.plot(x,-intfsec_avg[k,:],"-",color="k")
elif k%5 == 0 and k <= 10:
PL=ax.plot(x,-intfsec_avg[k,:],"--",color="k", linewidth=0.5)
textx = x[i_maxd]
texty = -0.5*(intfsec_avg[k-1,i_maxd] + intfsec_avg[k,i_maxd])
ax.text(textx,texty,str(k),verticalalignment="center",horizontalalignment="center",fontsize=6)
elif k%2 == 0 and k > 10:
PL=ax.plot(x,-intfsec_avg[k,:],"--",color="k", linewidth=0.5)
textx = x[i_maxd]
texty = -0.5*(intfsec_avg[k-1,i_maxd] + intfsec_avg[k,i_maxd])
ax.text(textx,texty,str(k),verticalalignment="center",horizontalalignment="center",fontsize=6)
### else :
### PL=ax.plot(x,-intfsec_avg[k,:],"-",color=".5")
# Print figure and remove wite space.
aspect = 50
pad_fraction = 0.25
divider = make_axes_locatable(ax)
width = axes_size.AxesY(ax, aspect=1./aspect)
pad = axes_size.Fraction(pad_fraction, width)
cax = divider.append_axes("right", size=width, pad=pad)
cb=ax.figure.colorbar(P,cax=cax,extend='both')
#cb=ax.figure.colorbar(P,extend='both')
if clim is not None : P.set_clim(clim)
#cb=ax.figure.colorbar(P,extend='both')
ax.set_title(variable+':'+myfile+'AVG-')
ax.set_ylabel('Depth [m]')
ax.set_xlabel(xlab)
#ax.set_position(pos)
#plt.tight_layout()
# Print in different y-lims
suff=os.path.basename(myfile)
if sectionid : suff=suff+"_"+sectionid
figure.canvas.print_figure("sec_AVG_%s_full_%s.png"%(variable,suff),dpi=dpi)
if 'Fram' in sectionid or 'Svin' in sectionid:
ax.set_ylim(-600,0)
figure.canvas.print_figure("sec_AVG_%s_600m_%s.png"%(variable,suff),dpi=dpi)
else :
ax.set_ylim(-3000,0)
figure.canvas.print_figure("sec_AVG_%s_3000m_%s.png"%(variable,suff),dpi=dpi)
#ax.set_ylim(-600,0)
#figure.canvas.print_figure("sec_AVG_%s_600m_%s.png"%(variable,suff),dpi=dpi)
# Close input file
#i_abfile.close()
#
ax.clear()
cb.remove()
def main(infile,
blo,
bla,
remove_isolated_basins=True,
remove_one_neighbour_cells=True,
remove_islets=True,
remove_inconsistent_nesting_zone=True,
inbathy=None,
write_to_file=True,
bathy_threshold=0.):
logger.info("Bathy threshold is %12.4f" % bathy_threshold)
# Read plon,plat
gfile = abf.ABFileGrid("regional.grid", "r")
plon = gfile.read_field("plon")
plat = gfile.read_field("plat")
gfile.close()
# Read input bathymetri
if inbathy is not None:
in_depth_m = inbathy
else:
bfile = abf.ABFileBathy(infile,
"r",
idm=gfile.idm,
jdm=gfile.jdm,
mask=True)
in_depth_m = bfile.read_field("depth")
#print "in_depth_m type, min, max:",type(in_depth_m),in_depth_m.min(),in_depth_m.max()
bfile.close()
# Modify basin
in_depth = numpy.ma.filled(in_depth_m, bathy_threshold)
depth = numpy.copy(in_depth)
logger.info("depth min max: %f8.0 %f8.0" % (depth.min(), depth.max()))
it = 1
while it == 1 or numpy.count_nonzero(numpy.abs(depth - depth_old)) > 0:
depth_old = numpy.copy(depth)
logger.info("Basin modifications ... pass %d" % (it))
if remove_isolated_basins:
depth = modeltools.tools.remove_isolated_basins(
plon, plat, depth, blo, bla, threshold=bathy_threshold)
if remove_islets:
depth = modeltools.tools.remove_islets(depth,
threshold=bathy_threshold)
if remove_one_neighbour_cells:
depth = modeltools.tools.remove_one_neighbour_cells(
depth, threshold=bathy_threshold)
if remove_inconsistent_nesting_zone:
depth = modeltools.tools.remove_inconsistent_nesting_zone(
depth, threshold=bathy_threshold)
logger.info("Modified %d points " %
numpy.count_nonzero(depth - depth_old))
it += 1
logger.info("Modifications finished after %d iterations " % (it - 1))
w5 = numpy.copy(depth)
w5[:, 0] = bathy_threshold
w5[:, -1] = bathy_threshold
w5[0, :] = bathy_threshold
w5[-1, :] = bathy_threshold
#print "w5 type min max",type(w5),w5.min(),w5.max()
# Mask data where depth below threshold
w5_m = numpy.ma.masked_where(w5 <= bathy_threshold, w5)
# Create netcdf file with all stages for analysis
logger.info("Writing bathymetry to file bathy_consistency.nc")
ncid = netCDF4.Dataset("bathy_consistency.nc", "w")
ncid.createDimension("idm", w5.shape[1])
ncid.createDimension("jdm", w5.shape[0])
ncid.createVariable("lon", "f8", ("jdm", "idm"))
ncid.createVariable("lat", "f8", ("jdm", "idm"))
ncid.createVariable("old", "f8", ("jdm", "idm"))
ncid.createVariable("old_masked", "f8", ("jdm", "idm"))
ncid.createVariable("new", "f8", ("jdm", "idm"))
ncid.createVariable("new_masked", "f8", ("jdm", "idm"))
ncid.createVariable("modified", "i4", ("jdm", "idm"))
ncid.variables["lon"][:] = plon
ncid.variables["lat"][:] = plat
ncid.variables["old"][:] = in_depth
ncid.variables["old_masked"][:] = in_depth_m
ncid.variables["new"][:] = w5
ncid.variables["new_masked"][:] = w5_m
modmask = numpy.abs(in_depth - depth) > .1
ncid.variables["modified"][:] = modmask.astype("i4")
ncid.close()
logger.info("Writing bathymetry plot to file newbathy.png")
figure = matplotlib.pyplot.figure(figsize=(8, 8))
ax = figure.add_subplot(111)
P = ax.pcolormesh(w5_m)
figure.colorbar(P,
norm=matplotlib.colors.LogNorm(vmin=w5_m.min(),
vmax=w5_m.max()))
I, J = numpy.where(numpy.abs(modmask) > .1)
ax.scatter(J, I, 20, "r")
figure.canvas.print_figure("newbathy.png")
# Print to HYCOM and CICE bathymetry files
if write_to_file:
abf.write_bathymetry("CONSISTENT", 0, w5, bathy_threshold)
return w5
def main(myfiles,
fieldname,
fieldlevel,
idm=None,
jdm=None,
clim=None,
filetype="archive",
window=None,
cmap="jet",
datetime1=None,
datetime2=None,
vector="",
tokml=False,
masklim=None,
filename2='',
dpi=180):
cmap = matplotlib.pyplot.get_cmap("jet")
ab = abf.ABFileGrid("regional.grid", "r")
plon = ab.read_field("plon")
plat = ab.read_field("plat")
scpx = ab.read_field("scpx")
scpy = ab.read_field("scpy")
target_lonlats = [plon, plat]
abdpth = abf.ABFileBathy('regional.depth', "r", idm=ab.idm, jdm=ab.jdm)
mdpth = abdpth.read_field('depth')
maskd = mdpth.data
maskd[maskd > 1e29] = np.nan
#Region_mask=True
Region_mask = False
if Region_mask:
maskd[plat > 80] = np.nan
maskd[plat < 50] = np.nan
maskd[plon > 60] = np.nan
maskd[plon < -50] = np.nan
Nordic_mask = maskd
proj = ccrs.Stereographic(central_latitude=90.0, central_longitude=-40.0)
pxy = proj.transform_points(ccrs.PlateCarree(), plon, plat)
px = pxy[:, :, 0]
py = pxy[:, :, 1]
x, y = np.meshgrid(np.arange(plon.shape[1]), np.arange(plon.shape[0]))
if vector:
logger.info("Vector component 1:%s" % fieldname)
logger.info("Vector component 2:%s" % vector)
#---------------first read and compute clim
Err_map = 1
freezp = -1.8
sum_fld1 = maskd
sum_fld1[~np.isnan(sum_fld1)] = 0.0
Clim_arr = np.zeros((plon.shape[0], plon.shape[1], 12))
#---------------
# compute for TP6 files
#-----------------------------------------
#---------------------------------------------------------------------------------
#---------------------------------------------------------------------------------
# filename2
onemm = 9.806
counter = 0
file_count = 0
sum_fld1 = maskd
sum_fld1[~np.isnan(sum_fld1)] = 0.0
dt_cnl = np.zeros(len(myfiles))
diff_dt_cnl = np.zeros(len(myfiles))
rmse_dt_cnl = np.zeros(len(myfiles))
Labl1 = "CNTL SST"
Labl1 = myfiles[0][:28]
yyyy1 = myfiles[0][-9:-5]
if "archv." in myfiles[0]:
yyyy1 = myfiles[0][-13:-9]
print("myfiles[0]=", myfiles[0])
print("yyy1=", yyyy1)
if filename2:
dt_2 = np.zeros(len(filename2))
diff_dt_2 = np.zeros(len(filename2))
rmse_dt_2 = np.zeros(len(filename2))
tid_2=np.array([datetime.datetime(int(yyyy1), 1, 15) \
+ relativedelta(months=i) for i in range(len(filename2))])
Labl2 = filename2[0][:28]
counter = 0
file_count = 0
sum_fld1 = maskd
sum_fld1[~np.isnan(sum_fld1)] = 0.0
if "srfhgt" in fieldname:
fieldname = "srfhgt"
elif "temp" in fieldname:
fieldname = "temp"
for fil0 in filename2:
logger.info("Now processing %s" % fil0)
n_intloop,ab,ab2,rdtimes = open_file(fil0,filetype,fieldname,fieldlevel,\
datetime1=datetime1,datetime2=datetime2,vector=vector,idm=idm,jdm=jdm)
# Intloop used to read more fields in one file. Only for forcing for now
for i_intloop in range(n_intloop):
# Read ab file of different types
if filetype == "archive":
fld1 = ab.read_field(fieldname, fieldlevel)
elif filetype == "forcing":
fld1 = ab.read_field(fieldname, rdtimes[i_intloop])
if vector:
fld2 = ab2.read_field(vector, rdtimes[i_intloop])
logger.info("Processing time %.2f" % rdtimes[i_intloop])
else:
raise NotImplementedError("Filetype %s not implemented" %
filetype)
# Create scalar field for vectors
print('---------mn,mx data=', fld1.min(), fld1.max())
#if "srfhgt" in fieldname:
# fld1= fld1/9.806
print("fld1.shpe", fld1.shape)
print('mn,mx=', fld1.min(), fld1.max(), 'count=', counter)
dt_2[counter] = np.nanmean(fld1)
counter = counter + 1
sum_fld1 = sum_fld1 + fld1
del fld1
#---------------------------------------------------------------------------------
#---------------------------------------------------------------------------------
base = datetime.datetime(int(yyyy1), 1, 15)
tid = np.array(
[base + relativedelta(months=i) for i in range(len(myfiles))])
if "archv." in myfiles[0]:
tid = np.array(
[base + relativedelta(days=i) for i in range(len(myfiles))])
nmexp = 1
if filename2:
nmexp = nmexp + 1
print(
'processing data from No runs ==##############>>>>>>>>>>>>>>>>>>>>>>>',
nmexp)
whole_domain = True
whole_domain = False
#
counter = 0
file_count = 0
sum_fld1 = maskd
sum_fld1[~np.isnan(sum_fld1)] = 0.0
logger.info(
">>>>>--------------------------Processing the first files= myfiles")
for myfile0 in myfiles:
logger.info("Now processing %s" % myfile0)
n_intloop,ab,ab2,rdtimes = open_file(myfile0,filetype,fieldname,fieldlevel,\
datetime1=datetime1,datetime2=datetime2,vector=vector,idm=idm,jdm=jdm)
# Intloop used to read more fields in one file. Only for forcing for now
for i_intloop in range(n_intloop):
# Read ab file of different types
if filetype == "archive":
fld1 = ab.read_field(fieldname, fieldlevel)
if ('temp' in fieldname) and whole_domain:
vert_fld_sum = 0
for lvl in range(50):
print('lvl=', lvl, fieldlevel)
fld_lvl = ab.read_field(fieldname, lvl + 1)
vert_fld_sum = vert_fld_sum + np.nanmean(fld_lvl)
vert_fld_avg = vert_fld_sum / 50.0
elif filetype == "forcing":
fld1 = ab.read_field(fieldname, rdtimes[i_intloop])
if vector: fld2 = ab2.read_field(vector, rdtimes[i_intloop])
logger.info("Processing time %.2f" % rdtimes[i_intloop])
else:
raise NotImplementedError("Filetype %s not implemented" %
filetype)
# Create scalar field for vectors
print('---------mn,mx data=', fld1.min(), fld1.max())
#if "srfhgt" in fieldname:
# fld1= fld1/9.806
print("fld1.shpe", fld1.shape)
print('mn,mx=', fld1.min(), fld1.max(), 'count=', counter)
if ('temp' in fieldname) and whole_domain:
dt_cnl[counter] = vert_fld_avg
else:
dt_cnl[counter] = np.nanmean(fld1)
counter = counter + 1
sum_fld1 = sum_fld1 + fld1
del fld1
# End i_intloop
print('Computing the avearge of file_counter= ', file_count,
'counter=', counter)
#---------------------------------------
#---------------------------------------
#plot_climatology
Clim_arr = np.zeros((plon.shape[0], plon.shape[1], 12))
if 'tem' in fieldname:
counter = 0
rlxfile0 = "/cluster/work/users/achoth/TP5a0.06/relax/050/relax_tem.a"
rlx_afile = abf.AFile(ab.idm, ab.jdm, rlxfile0, "r")
lyr = fieldlevel
record_num = lyr
record_var = record_num - 1
fld = rlx_afile.read_record(record_var)
print('mn,mx data=', fld.min(), fld.max())
kdm = 50
dt_clim = np.zeros(12)
for mnth in range(12):
fld1 = rlx_afile.read_record(mnth * kdm + lyr - 1)
logger.debug("File %s, record_var/mnth*kdm %03d/%03d" %
(rlxfile0, record_var, mnth * kdm))
print('record, mn,mx data=', kdm * mnth, fld1.min(), fld1.max())
print('record, mn,mx data=', kdm * mnth, fld1.min(), fld1.max())
# Intloop used to read more fields in one file. Only for forcing for now
dt_clim[mnth] = np.nanmean(fld1)
#Clim_arr[:,:,mnth]=fld1[:,:]
counter = counter + 1
print('counter=', counter)
del fld1
#
tid_clim = np.array(
[base + relativedelta(months=i) for i in range(12)])
#figure, ax = matplotlib.pyplot.figure()
rpt = len(dt_cnl) / 12
dt_clim_cat = dt_clim
for ii in range(int(rpt - 1)):
print("concatenate ")
dt_clim_cat = np.concatenate([dt_clim_cat, dt_clim])
#
#---------------------------------------
#---------------------------------------
figure, ax = plt.subplots()
years = YearLocator() # every year
months = MonthLocator() # every month
yearsFmt = DateFormatter('%Y')
#ax=figure.add_subplot(111)
nplts = 1
ax.plot_date(tid, dt_cnl, '-o', color='g', ms=3, label=Labl1)
if 'tem' in fieldname:
ax.plot_date(tid[0:len(dt_cnl)],
dt_clim_cat[:],
':',
color='black',
label='Phc-Clim.')
if filename2:
ax.plot_date(tid_2, dt_2, '-v', color='orange', ms=3, label=Labl2)
ax.xaxis.set_major_locator(years)
ax.xaxis.set_major_formatter(yearsFmt)
ax.xaxis.set_minor_locator(months)
ax.autoscale_view()
# format the coords message box
def price(x):
return '$%1.2f' % x
ax.fmt_xdata = DateFormatter('%Y-%m-%d')
ax.fmt_ydata = price
ax.grid(True)
figure.autofmt_xdate()
legend = plt.legend(loc='upper left', fontsize=8)
plt.title("Area-averaged: %s(%d)" % (fieldname, fieldlevel))
plt.ylabel("%s(%d)" % (fieldname, fieldlevel))
if "k.e" in fieldname:
fieldname = "KE"
if "u-vel" in fieldname:
fieldname = "u-vel"
ts_fil = "Time_series_cntl%s_%02d_%02d" % (fieldname, fieldlevel, counter)
if Region_mask:
ts_fil = 'Region_' + ts_fil
figure.canvas.print_figure(ts_fil, bbox_inches='tight', dpi=dpi)
logger.info("Successfull printing: %s" % ts_fil)
def main(myfiles,
fieldname,
fieldlevel,
idm=None,
jdm=None,
clim=None,
filetype="archive",
window=None,
cmap="jet",
datetime1=None,
datetime2=None,
vector="",
tokml=False,
exptid="",
masklim=None,
dpi=180):
cmap = plt.get_cmap("jet")
LinDic = mod_hyc2plot.cmap_dict('sawtooth_fc100.txt')
my_cmap = matplotlib.colors.LinearSegmentedColormap('my_colormap', LinDic)
cmap = my_cmap
if vector:
cmap = cmocean.cm.speed
if tokml:
ab = abf.ABFileGrid("regional.grid", "r")
plon = ab.read_field("plon")
plat = ab.read_field("plat")
ab.close()
ab = abf.ABFileGrid("regional.grid", "r")
plon = ab.read_field("plon")
plat = ab.read_field("plat")
ab.close()
proj = ccrs.Stereographic(central_latitude=90.0, central_longitude=-40.0)
pxy = proj.transform_points(ccrs.PlateCarree(), plon, plat)
px = pxy[:, :, 0]
py = pxy[:, :, 1]
x, y = np.meshgrid(np.arange(plon.shape[1]), np.arange(plon.shape[0]))
if vector:
logger.info("Vector component 1:%s" % fieldname)
logger.info("Vector component 2:%s" % vector)
figure = plt.figure(figsize=(8, 8))
ax = figure.add_subplot(111)
ax.set_facecolor('xkcd:gray')
onemm = 9.806
counter = 0
sum_fld = np.zeros(plon.shape)
sumf1 = np.zeros(plon.shape)
sumf2 = np.zeros(plon.shape)
file_count = 0
for myfile0 in myfiles:
# Open files, and return some useful stuff.
# ab2 i used in case of vector
# rdtimes is used for plotting forcing fields
n_intloop, ab, ab2, rdtimes = open_file(myfile0,
filetype,
fieldname,
fieldlevel,
datetime1=datetime1,
datetime2=datetime2,
vector=vector,
idm=idm,
jdm=jdm)
# Intloop used to read more fields in one file. Only for forcing for now
for i_intloop in range(n_intloop):
# Read ab file of different types
if filetype == "archive":
fld1 = ab.read_field(fieldname, fieldlevel)
if vector: fld2 = ab.read_field(vector, fieldlevel)
elif filetype == "regional.depth":
fld1 = ab.read_field(fieldname)
elif filetype == "forcing":
fld1 = ab.read_field(fieldname, rdtimes[i_intloop])
if vector: fld2 = ab2.read_field(vector, rdtimes[i_intloop])
logger.info("Processing time %.2f" % rdtimes[i_intloop])
else:
raise NotImplementedError("Filetype %s not implemented" %
filetype)
if not window:
J, I = np.meshgrid(np.arange(fld1.shape[0]),
np.arange(fld1.shape[1]))
else:
J, I = np.meshgrid(np.arange(window[1], window[3]),
np.arange(window[0], window[2]))
print('mnfld1,mxfld1=', fld1.min(), fld1.max())
# Create scalar field for vectors
if vector:
fld = np.sqrt(fld1**2 + fld2**2)
print('mnfld2,mxfld2=', fld2.min(), fld2.max())
else:
fld = fld1
# Apply mask if requested
if masklim:
fld = np.ma.masked_where(fld <= masklim[0], fld)
fld = np.ma.masked_where(fld >= masklim[1], fld)
sum_fld = sum_fld + fld
counter = counter + 1
if vector:
sumf1 = sumf1 + fld1
sumf2 = sumf2 + fld2
file_count = file_count + 1
# End i_intloop
print('Computing the avearge of file_counter= ', file_count, 'counter=',
counter)
if file_count > 0:
fld_Avg = sum_fld / file_count
print('mn_Avg_fld,mx_Avg_fld=', fld_Avg.min(), fld_Avg.max())
if vector:
f1_avg = sumf1 / file_count
f2_avg = sumf2 / file_count
print('mn_avg_fld1,mx_avg_fld1=', f1_avg.min(), f1_avg.max())
print('mn_avg_fld2,mx_avg_fld2=', f2_avg.min(), f2_avg.max())
if fieldname == 'k.e.':
P = plt.pcolormesh(x[J, I],
y[J, I],
np.log10(fld_Avg[J, I]),
cmap=cmap,
shading='auto')
elif fieldname == 'srfhgt':
P = plt.pcolormesh(x[J, I],
y[J, I], (fld_Avg[J, I] / onemm),
cmap=cmap,
shading='auto')
else:
P = plt.pcolormesh(x[J, I],
y[J, I],
fld_Avg[J, I],
cmap=cmap,
shading='auto')
if 'temp' in fieldname:
P1=plt.contour(x[J,I],y[J,I],fld_Avg[J,I],levels=[-1.,1,4.0,8], \
colors=('w',),linestyles=('-',),linewidths=(1.5,))
plt.clabel(P1, fmt='%2.1d', colors='w',
fontsize=10) #contour line labels
if vector:
skip = 10
logger.info("ploting quiver .......>>> %s" % vector)
I2 = I[::skip, ::skip]
J2 = J[::skip, ::skip]
plt.quiver(x[J2, I2], y[J2, I2], f1_avg[J2, I2], f2_avg[J2, I2])
##
# Print figure and remove wite space.
ax.set_facecolor('xkcd:gray')
aspect = 40
pad_fraction = 0.25
divider = make_axes_locatable(ax)
width = axes_size.AxesY(ax, aspect=1. / aspect)
pad = axes_size.Fraction(pad_fraction, width)
cax = divider.append_axes("right", size=width, pad=pad)
if vector:
cb = ax.figure.colorbar(P, cax=cax, extend='max')
else:
cb = ax.figure.colorbar(P, cax=cax, extend='both')
if clim is not None: P.set_clim(clim)
ax.set_title('Avg' + "%s:%s(%d)" % (myfile0, fieldname, fieldlevel))
# Print figure.
fnamepng_template = exptid + "Avg_%s_%d_%03d_Avg.png"
fnamepng = fnamepng_template % (fieldname, fieldlevel, counter)
logger.info("output in %s" % fnamepng)
figure.canvas.print_figure(fnamepng, bbox_inches='tight', dpi=dpi)
ax.clear()
cb.remove()
def main(myfiles,
fieldname,
fieldlevel,
idm=None,
jdm=None,
clim=None,
filetype="archive",
window=None,
cmap="jet",
datetime1=None,
datetime2=None,
vector="",
tokml=False,
masklim=None,
filename2='',
filename5='',
dpi=180):
LinDic = mod_hyc2plot.cmap_dict('sawtooth_fc100.txt')
if 'temp' or 'sal' in fieldname:
cmap = matplotlib.colors.LinearSegmentedColormap('my_colormap', LinDic)
else:
cmap = matplotlib.colors.LinearSegmentedColormap('my_colormap', LinDic)
if tokml:
ab = abf.ABFileGrid("regional.grid", "r")
plon = ab.read_field("plon")
plat = ab.read_field("plat")
ab.close()
ab = abf.ABFileGrid("regional.grid", "r")
plon = ab.read_field("plon")
plat = ab.read_field("plat")
scpx = ab.read_field("scpx")
scpy = ab.read_field("scpy")
target_lonlats = [plon, plat]
abdpth = abf.ABFileBathy('regional.depth', "r", idm=ab.idm, jdm=ab.jdm)
mdpth = abdpth.read_field('depth')
maskd = mdpth.data
maskd[maskd > 1e29] = np.nan
Region_mask = True
Region_mask = False
if Region_mask:
maskd[plat > 70] = np.nan
#maskd[plat<50]=np.nan
maskd[plon > 20] = np.nan
maskd[plon < -30] = np.nan
Nordic_mask = maskd
proj = ccrs.Stereographic(central_latitude=90.0, central_longitude=-40.0)
pxy = proj.transform_points(ccrs.PlateCarree(), plon, plat)
px = pxy[:, :, 0]
py = pxy[:, :, 1]
x, y = np.meshgrid(np.arange(plon.shape[1]), np.arange(plon.shape[0]))
if vector:
logger.info("Vector component 1:%s" % fieldname)
logger.info("Vector component 2:%s" % vector)
#---------------first read and compute clim
Err_map = 1
sum_fld1 = maskd
sum_fld1[~np.isnan(sum_fld1)] = 0.0
Clim_arr = np.zeros((plon.shape[0], plon.shape[1], 12))
if 'tem' or 'sal' in fieldname:
counter = 0
if 'tem' in fieldname:
rlxfile0 = "/cluster/work/users/achoth/TP5a0.06/relax/050/relax_tem.a"
if 'sal' in fieldname:
rlxfile0 = "/cluster/work/users/achoth/TP5a0.06/relax/050/relax_sal.a"
rlx_afile = abf.AFile(ab.idm, ab.jdm, rlxfile0, "r")
lyr = fieldlevel
record_num = 1
record_var = record_num - 1
fld = rlx_afile.read_record(record_var)
print('mn,mx data='), fld.min(), fld.max()
kdm = 50
dt_clim = np.zeros(12)
for mnth in range(12):
fld1 = rlx_afile.read_record(mnth * kdm + lyr - 1)
print('record, mn,mx data='), kdm * mnth, fld1.min(), fld1.max()
# Intloop used to read more fields in one file. Only for forcing for now
dt_clim[mnth] = mod_hyc2plot.spatiomean(fld1, maskd)
sum_fld1 = sum_fld1 + fld1
Clim_arr[:, :, mnth] = fld1[:, :]
counter = counter + 1
print('counter='), counter
del fld1
Clim_Avg = sum_fld1 / counter
del sum_fld1
#---------------filename
figure = matplotlib.pyplot.figure(figsize=(8, 8))
ax = figure.add_subplot(111)
onemm = 9.806
counter = 0
file_count = 0
sum_fld1 = maskd
sum_fld1[~np.isnan(sum_fld1)] = 0.0
dt_cnl = np.zeros(len(myfiles))
diff_dt_cnl = np.zeros(len(myfiles))
rmse_dt_cnl = np.zeros(len(myfiles))
Labl1 = "Model: " + fieldname
if "SPRBAS_0" in myfiles[0]:
Labl1 = "CNTL: prsbas=0 "
if filename2:
dt_2 = np.zeros(len(filename2))
diff_dt_2 = np.zeros(len(filename2))
rmse_dt_2 = np.zeros(len(filename2))
yyyy1 = filename2[0][-9:-5]
print("filename2[0]="), filename2[0][-9:-5]
print("filename2[0]="), filename2[0]
print("yyy1="), yyyy1
tid_2=np.array([datetime.datetime(int(yyyy1), 1, 15) \
+ relativedelta(months=i) for i in range(len(filename2))])
Labl2 = "filename2"
Labl2 = "Corrected"
if "erai" in filename2[0]:
Labl2 = "CNTL: prsbas=1e5 "
yyyy1cnt = myfiles[0][-8:-5]
print("myfiles[0]="), myfiles[0][-9:-5]
print("myfiles[0]="), myfiles[0]
print("yyy1cnt="), print(yyyy1cnt)
base = datetime.datetime(int(yyyy1cnt), 1, 15)
tid = np.array(
[base + relativedelta(months=i) for i in range(len(myfiles))])
if len(myfiles) == 36:
base = datetime.datetime(int(yyyy1cnt), 1, 15)
tid = np.array(
[base + relativedelta(months=i) for i in range(len(myfiles))])
nmexp = 1
if filename2:
nmexp = nmexp + 1
print(
'processing data from No runs ==##############>>>>>>>>>>>>>>>>>>>>>>>'
), nmexp
for iii in range(nmexp):
counter = 0
file_count = 0
sum_fld1 = maskd
sum_fld1[~np.isnan(sum_fld1)] = 0.0
if iii == 1 and filename2:
myfiles = filename2
else:
logger.info(
">>>>>--------------------------Processing the first files= %d<<<<"
% iii)
logger.info(
">>>>>--------------------------Processing the first files= %d<<<<"
% iii)
for myfile0 in myfiles:
# Open files, and return some useful stuff.
# ab2 i used in case of vector
# rdtimes is used for plotting forcing fields
n_intloop,ab,ab2,rdtimes = open_file(myfile0,filetype,fieldname,fieldlevel,\
datetime1=datetime1,datetime2=datetime2,vector=vector,idm=idm,jdm=jdm)
# Intloop used to read more fields in one file. Only for forcing for now
for i_intloop in range(n_intloop):
# Read ab file of different types
if filetype == "archive":
fld1 = ab.read_field(fieldname, fieldlevel)
elif filetype == "forcing":
fld1 = ab.read_field(fieldname, rdtimes[i_intloop])
if vector:
fld2 = ab2.read_field(vector, rdtimes[i_intloop])
logger.info("Processing time %.2f" % rdtimes[i_intloop])
else:
raise NotImplementedError("Filetype %s not implemented" %
filetype)
if not window:
J, I = np.meshgrid(np.arange(fld1.shape[0]),
np.arange(fld1.shape[1]))
else:
J, I = np.meshgrid(np.arange(window[1], window[3]),
np.arange(window[0], window[2]))
# Create scalar field for vectors
if vector:
fld = np.sqrt(fld1**2 + fld2**2)
else:
fld = fld1
print('---------mn,mx data='), fld.min(), fld.max()
sum_fld1 = sum_fld1 + fld
cindx = np.remainder(counter, 12)
print("counter"), counter, print("cindx="), cindx
if iii == 0:
dt_cnl[counter] = mod_hyc2plot.spatiomean(fld, Nordic_mask)
diff_dt_cnl[counter] = mod_hyc2plot.spatiomean(
fld[:, :] - Clim_arr[:, :, cindx], Nordic_mask)
rmse_dt_cnl[counter] = np.sqrt(
mod_hyc2plot.spatiomean(
(fld[:, :] - Clim_arr[:, :, cindx])**2,
Nordic_mask))
Labl = Labl1
if iii == 1 and filename2:
dt_2[counter] = mod_hyc2plot.spatiomean(fld, Nordic_mask)
diff_dt_2[counter] = mod_hyc2plot.spatiomean(
fld[:, :] - Clim_arr[:, :, cindx], Nordic_mask)
rmse_dt_2[counter] = np.sqrt(
mod_hyc2plot.spatiomean(
(fld[:, :] - Clim_arr[:, :, cindx])**2,
Nordic_mask))
Labl = Labl2
# Apply mask if requested
counter = counter + 1
file_count = file_count + 1
del fld
# End i_intloop
print('Computing the avearge of file_counter= '), print(
file_count), print('counter='), print(counter), print(
'cindx='), print(cindx)
if file_count > 0:
fld_Avg = sum_fld1 / file_count
if Err_map:
cmap = cmocean.cm.balance
fld_diff = fld_Avg - Clim_Avg
if fieldname == 'k.e.':
P = ax.pcolormesh(x[J, I],
y[J, I],
np.log10(fld_Avg[J, I]),
cmap=cmap)
elif fieldname == 'srfhgt':
P = ax.pcolormesh(x[J, I],
y[J, I], (fld_Avg[J, I] / onemm),
cmap=cmap)
else:
P = ax.pcolormesh(x[J, I], y[J, I], fld_diff[J, I], cmap=cmap)
if 'temp' in fieldname:
P1 = ax.contour(x[J, I],
y[J, I],
fld_diff[J, I],
levels=[-1., 1, 4.0, 8],
colors=('w', ),
linestyles=('-', ),
linewidths=(1.5, ))
matplotlib.pyplot.clabel(P1, fmt='%2.1d', colors='w',
fontsize=10) #contour line labels
# Print figure.
aspect = 40
pad_fraction = 0.25
divider = make_axes_locatable(ax)
width = axes_size.AxesY(ax, aspect=1. / aspect)
pad = axes_size.Fraction(pad_fraction, width)
cax = divider.append_axes("right", size=width, pad=pad)
cb = ax.figure.colorbar(P, cax=cax, extend='both')
if clim is not None: P.set_clim(clim)
ax.set_title("Diff:%s(%d)" % (fieldname, fieldlevel) +
' :( Model - Clim )')
# Print figure.
fnamepng_template = myfiles[0][-20:-5].replace(
"/", '') + "_Avg_TP6_%s_%d_%03d_iii%03d_Avg.png"
if Region_mask:
fnamepng_template='Region_'+yyyy1cnt+myfiles[0][1:11].replace("/",'') \
+"Avg_TP5_%s_%d_%03d_iii%03d_Avg.png"
fnamepng = fnamepng_template % (fieldname, fieldlevel, counter, iii)
logger.info("output in %s" % fnamepng)
figure.canvas.print_figure(fnamepng, bbox_inches='tight', dpi=dpi)
ax.clear()
cb.remove()
datmen = np.nanmean(fld_diff)
spatiodatmen = mod_hyc2plot.spatiomean(fld_diff, Nordic_mask)
print('-----------mean diff data, spatio='), datmen, spatiodatmen
del sum_fld1
#---------------------------------------
print('tid len='), print(tid.shape)
if filename2:
print('dt_2='), print(dt_2.shape)
tid_clim = np.array([base + relativedelta(months=i) for i in range(12)])
figure, ax = plt.subplots()
rpt = len(dt_cnl) / 12
dt_clim_cat = dt_clim
for ii in range(int(rpt - 1)):
print("concatenate ")
dt_clim_cat = np.concatenate([dt_clim_cat, dt_clim])
years = YearLocator() # every year
months = MonthLocator() # every month
yearsFmt = DateFormatter('%Y')
nplts = 1
ax.plot_date(tid, dt_cnl, '-o', color='g', ms=3, label=Labl1)
if filename2:
ax.plot_date(tid_2, dt_2, '-v', color='orange', ms=3, label=Labl2)
nplts = nplts + 1
if filename5:
ax.plot_date(tid_5, dt_5, '--', color='m', label=Labl5)
nplts = nplts + 1
if 'tem' or 'sal' in fieldname:
ax.plot_date(tid[0:len(dt_cnl)],
dt_clim_cat[:],
':',
color='black',
label='Clim:' + fieldname)
nplts = nplts + 1
ax.xaxis.set_major_locator(years)
ax.xaxis.set_major_formatter(yearsFmt)
ax.xaxis.set_minor_locator(months)
ax.autoscale_view()
# format the coords message box
def price(x):
return '$%1.2f' % x
ax.fmt_xdata = DateFormatter('%Y-%m-%d')
ax.fmt_ydata = price
ax.grid(True)
figure.autofmt_xdate()
legend = plt.legend(loc='upper left', fontsize=8)
plt.title("Area-averaged: %s(%d)" % (fieldname, fieldlevel))
plt.ylabel("%s(%d)" % (fieldname, fieldlevel))
ts_fil = "time_series_cntl_flx_%s_%02d_%02d" % (fieldname, fieldlevel,
nplts)
if Region_mask:
ts_fil = 'Region_' + ts_fil
figure.canvas.print_figure(ts_fil, bbox_inches='tight', dpi=dpi)
logger.info("Successfull printing: %s" % ts_fil)
#-----------------
# plot short mean error
figure, ax = plt.subplots()
print("diff_dt_cnl[:]="), diff_dt_cnl[:]
nplts = 1
ll = -1 * len(tid)
if filename2:
ll = -1 * len(tid)
ax.plot_date(tid[ll:], diff_dt_cnl[ll:], '-o', color='g', ms=3)
if filename2:
ax.plot_date(tid_2, diff_dt_2, '-v', color='orange', ms=3, label=Labl2)
nplts = nplts + 1
ax.xaxis.set_major_locator(years)
ax.xaxis.set_major_formatter(yearsFmt)
ax.xaxis.set_minor_locator(months)
ax.autoscale_view()
# format the coords message box
def price(x):
return '$%1.2f' % x
ax.fmt_xdata = DateFormatter('%Y-%m-%d')
ax.fmt_ydata = price
ax.grid(True)
figure.autofmt_xdate()
legend = plt.legend(loc='upper left', fontsize=8)
plt.title("Mean diff:Model-Clim: %s(%d)" % (fieldname, fieldlevel))
plt.ylabel("diff:%s(%d)" % (fieldname, fieldlevel))
ts_fil = 'Mdiff' + "ST_cntl_flx_%s_%02d_%02d" % (fieldname, fieldlevel,
nplts)
if Region_mask:
ts_fil = 'Region_Mdiff' + "ST_cntl_flx_%s_%02d_%02d" % (
fieldname, fieldlevel, nplts)
figure.canvas.print_figure(ts_fil, bbox_inches='tight', dpi=dpi)
logger.info("Successfull printing: %s" % ts_fil)
# plot rooot mean square RMSE error
figure, ax = plt.subplots()
nplts = 1
ll = -1 * len(tid)
if filename2:
ll = -1 * len(tid_2)
ax.plot_date(tid[ll:], rmse_dt_cnl[ll:], '-o', color='g', ms=3)
if filename2:
ax.plot_date(tid_2, rmse_dt_2, '-v', color='orange', ms=3, label=Labl2)
nplts = nplts + 1
ax.xaxis.set_major_locator(years)
ax.xaxis.set_major_formatter(yearsFmt)
ax.xaxis.set_minor_locator(months)
ax.autoscale_view()
# format the coords message box
def price(x):
return '$%1.2f' % x
ax.fmt_xdata = DateFormatter('%Y-%m-%d')
ax.fmt_ydata = price
ax.grid(True)
figure.autofmt_xdate()
legend = plt.legend(loc='upper left', fontsize=8)
plt.title("RMSE: (Model-Clim) %s(%d)" % (fieldname, fieldlevel))
plt.ylabel("RMSE:%s(%d)" % (fieldname, fieldlevel))
ts_fil = 'RMSE' + "ST_cntl_flx_%s_%02d_%02d" % (fieldname, fieldlevel,
nplts)
if Region_mask:
ts_fil = 'Region_RMSE' + "ST2007_cntl_flx_%s_%02d_%02d" % (
fieldname, fieldlevel, nplts)
figure.canvas.print_figure(ts_fil, bbox_inches='tight', dpi=dpi)
logger.info("Successfull printing: %s" % ts_fil)
logger.info(
"End --------------------------------------------------------------- printing: %s"
% ts_fil)
def main(lon1,
lat1,
lon2,
lat2,
variable,
files,
filetype="archive",
clim=None,
sectionid="",
ijspace=False,
xaxis="distance",
section_map=False,
dpi=180):
logger.info("Filetype is %s" % filetype)
gfile = abf.ABFileGrid("regional.grid", "r")
plon = gfile.read_field("plon")
plat = gfile.read_field("plat")
# Set up section info
if ijspace:
sec = gridxsec.SectionIJSpace([lon1, lon2], [lat1, lat2], plon, plat)
else:
sec = gridxsec.Section([lon1, lon2], [lat1, lat2], plon, plat)
I, J = sec.grid_indexes
dist = sec.distance
slon = sec.longitude
slat = sec.latitude
print(slon.shape)
print(slat.shape)
logger.info("Min max I-index (starts from 0):%d %d" % (I.min(), I.max()))
logger.info("Min max J-index (starts from 0):%d %d" % (J.min(), J.max()))
if section_map:
ll_lon = slon.min() - 10.
ur_lon = slon.max() + 10.
ll_lat = np.maximum(-90., slat.min() - 10.)
ur_lat = np.minimum(90., slat.max() + 10.)
proj = ccrs.Stereographic(central_latitude=90.0,
central_longitude=-40.0)
pxy = proj.transform_points(ccrs.PlateCarree(), plon, plat)
px = pxy[:, :, 0]
py = pxy[:, :, 1]
x, y = np.meshgrid(np.arange(slon.shape[0]), np.arange(slat.shape[0]))
figure = plt.figure(figsize=(10, 8))
ax = figure.add_subplot(111)
ax = plt.axes(projection=ccrs.PlateCarree())
ax.set_extent([-179, 179, 53, 85], ccrs.PlateCarree())
ax.add_feature(cfeature.GSHHSFeature('auto', edgecolor='grey'))
ax.add_feature(cfeature.GSHHSFeature('auto', facecolor='grey'))
ax.gridlines()
ax.plot(slon, slat, "r-", lw=1)
pos = ax.get_position()
asp = pos.height / pos.width
w = figure.get_figwidth()
h = asp * w
figure.set_figheight(h)
if sectionid:
figure.canvas.print_figure("map_%s.png" % sectionid, dpi=dpi)
else:
figure.canvas.print_figure("map.png", dpi=dpi)
# Get layer thickness variable used in hycom
dpname = modeltools.hycom.layer_thickness_variable[filetype]
logger.info("Filetype %s: layer thickness variable is %s" %
(filetype, dpname))
if xaxis == "distance":
x = dist / 1000.
xlab = "Distance along section[km]"
elif xaxis == "i":
x = I
xlab = "i-index"
elif xaxis == "j":
x = J
xlab = "j-index"
elif xaxis == "lon":
x = slon
xlab = "longitude"
elif xaxis == "lat":
x = slat
xlab = "latitude"
else:
logger.warning("xaxis must be i,j,lo,lat or distance")
x = dist / 1000.
xlab = "Distance along section[km]"
# Loop over archive files
figure = plt.figure()
ax = figure.add_subplot(111)
pos = ax.get_position()
for fcnt, myfile0 in enumerate(files):
# Remove [ab] ending if present
m = re.match("(.*)\.[ab]", myfile0)
if m:
myfile = m.group(1)
else:
myfile = myfile0
# Add more filetypes if needed. By def we assume archive
if filetype == "archive":
i_abfile = abf.ABFileArchv(myfile, "r")
elif filetype == "restart":
i_abfile = abf.ABFileRestart(myfile,
"r",
idm=gfile.idm,
jdm=gfile.jdm)
else:
raise NotImplementedError("Filetype %s not implemented" % filetype)
# kdm assumed to be max level in ab file
kdm = max(i_abfile.fieldlevels)
# Set up interface and daat arrays
intfsec = np.zeros((kdm + 1, I.size))
datasec = np.zeros((kdm + 1, I.size))
# Loop over layers in file.
logger.info("File %s" % (myfile))
for k in range(kdm):
logger.debug("File %s, layer %03d/%03d" % (myfile, k, kdm))
# Get 2D fields
dp2d = i_abfile.read_field(dpname, k + 1)
data2d = i_abfile.read_field(variable, k + 1)
dp2d = np.ma.filled(dp2d, 0.) / modeltools.hycom.onem
data2d = np.ma.filled(data2d, 1e30)
# Place data into section arrays
intfsec[k + 1, :] = intfsec[k, :] + dp2d[J, I]
if k == 0: datasec[k, :] = data2d[J, I]
datasec[k + 1, :] = data2d[J, I]
i_maxd = np.argmax(np.abs(intfsec[kdm, :]))
# Set up section plot
datasec = np.ma.masked_where(datasec > 0.5 * 1e30, datasec)
P = plt.pcolormesh(x, -intfsec, datasec, cmap="jet", shading='auto')
if clim is not None: P.set_clim(clim)
# Plot layer interfaces
for k in range(1, kdm + 1):
if k % 10 == 0:
PL = ax.plot(x, -intfsec[k, :], "--", color="k", lw=.5)
elif k % 5 == 0:
PL = ax.plot(x, -intfsec[k, :], "--", color="k", lw=.5)
else:
PL = ax.plot(x, -intfsec[k, :], "--", color=".5", lw=.5)
textx = x[i_maxd]
texty = -0.5 * (intfsec[k - 1, i_maxd] + intfsec[k, i_maxd])
ax.text(textx,
texty,
str(k),
verticalalignment="center",
horizontalalignment="center",
fontsize=6)
cb = ax.figure.colorbar(P)
ax.set_title(myfile)
ax.set_ylabel(variable)
ax.set_xlabel(xlab)
# Print in different y-lims
suff = os.path.basename(myfile)
if sectionid: suff = suff + "_" + sectionid
figure.canvas.print_figure("sec_%s_full_%s.png" % (variable, suff),
dpi=dpi)
ax.set_ylim(-1000, 0)
figure.canvas.print_figure("sec_%s_1000m_%s.png" % (variable, suff),
dpi=dpi)
ax.set_ylim(-300, 0)
figure.canvas.print_figure("sec_%s_300m_%s.png" % (variable, suff),
dpi=dpi)
# Close input file
i_abfile.close()
#
ax.clear()
cb.remove()
