def step3(com):
print('Step 3')
ser = ac_serial.initSerial(com)
enable = False
conft = False
for x in range(3):
ac_serial.write(ser, b'\r')
while True:
try:
line = ac_serial.read(ser)
except:
pass
if line:
print(line)
else:
ac_serial.write(ser, b'\r')
if enable == True:
if conft:
if line[:11] == 'ap(config)#':
time.sleep(1)
ac_serial.write(ser, b'int bvi1\r')
elif line[:14] == 'ap(config-if)#':
time.sleep(1)
ac_serial.write(ser,
b'ip address 10.0.0.2 255.255.255.0\r')
print(ac_serial.read(ser))
time.sleep(1)
ac_serial.write(ser, b'exit\r')
print(ac_serial.read(ser))
time.sleep(1)
ac_serial.write(ser, b'exit\r')
print(ac_serial.read(ser))
break
elif line == 'ap#':
ac_serial.write(ser, b'conf t\r')
conft = True
else:
if line == 'ap>':
ac_serial.write(ser, b'en')
ac_serial.write(ser, b'\n')
time.sleep(1)
if line[:9] == 'Password:'******'Cisco')
time.sleep(0.5)
ac_serial.write(ser, b'\n')
enable = True
if line[:9] == ' --More--':
ac_serial.write(ser, b' ')
ac_serial.write(ser, b'\r')
def step8(com):
print('Step 8')
ser = ac_serial.initSerial(com)
ping = False
for x in range(3):
ac_serial.write(ser, b'\r')
while True:
try:
line = ac_serial.read(ser)
except:
pass
if line:
print(line)
else:
ac_serial.write(ser, b'\r')
if line[-8:] == 'command#':
if not ping:
ac_serial.write(ser, b'ping 10.221.64.1\r')
for x in range(5):
line = ac_serial.read(ser)
print(line)
if line[:7] == 'Success' or line[:1] == '!':
return (True)
else:
pass
def step5(com):
print('Step 5')
ser = ac_serial.initSerial(com)
for x in range(3):
ac_serial.write(ser, b'\r')
while True:
try:
line = ac_serial.read(ser)
except:
pass
if line:
print(line)
if line == 'ap>':
ac_serial.write(ser, b'en')
ac_serial.write(ser, b'\n')
time.sleep(1)
if line[:9] == 'Password:'******'Cisco')
time.sleep(0.5)
ac_serial.write(ser, b'\n')
if line == 'ap#':
break
def step7(com, vehicle):
print('Step 7')
ser = ac_serial.initSerial(com)
for x in range(3):
ac_serial.write(ser, b'\r')
while True:
try:
line = ac_serial.read(ser)
except:
pass
if line:
print(line)
else:
ac_serial.write(ser, b'\r')
if line == 'ap#':
load_fleet = 'copy flash:cb-{}-fleet.txt running-config'.format(
vehicle[0])
fleet_b = str.encode(load_fleet)
load_command = 'copy flash:cb-{}-command.txt running-config'.format(
vehicle[0])
command_b = str.encode(load_command)
ac_serial.write(ser, command_b)
line = ac_serial.read(ser)
print(line)
time.sleep(1)
ac_serial.write(ser, b'\r')
line = ac_serial.read(ser)
print(line)
time.sleep(1)
ac_serial.write(ser, b'\r')
line = ac_serial.read(ser)
print(line)
time.sleep(1)
if line[-8:] == 'command#':
print("Command config loaded")
break
return (True)
def step10(com):
print('Step 10')
ser = ac_serial.initSerial(com)
for x in range(3):
ac_serial.write(ser, b'\r')
line = ac_serial.read(ser)
if line[-6:] == 'fleet#':
print("Fleet config loaded")
ac_serial.write(ser, b'wr mem\r')
line = ac_serial.read(ser)
print(line)
time.sleep(1)
ac_serial.write(ser, b'\r')
line = ac_serial.read(ser)
print(line)
time.sleep(1)
return (True)
def step4(com):
print('Step 4')
ser = ac_serial.initSerial(com)
for x in range(3):
ac_serial.write(ser, b'\r')
while True:
try:
line = ac_serial.read(ser)
except:
ac_serial.write(ser, b'\r')
time.sleep(1)
if line:
print(line)
if line == 'ap#':
time.sleep(1)
ac_serial.write(
ser,
b'archive download-sw /overwrite /force-reload tftp://10.0.0.5/ap3g2-k9w7-tar.153-3.JI1.tar'
)
time.sleep(1)
ac_serial.write(ser, b'\r')
elif line == 'ap>':
ac_serial.write(ser, b'en')
ac_serial.write(ser, b'\n')
time.sleep(1)
elif line[:9] == 'Password:'******'Cisco')
time.sleep(0.5)
ac_serial.write(ser, b'\n')
enable = True
elif line[-18:] == 'console by console':
time.sleep(1)
ac_serial.write(ser, b'\r')
elif line[-22:] == 'existing image version':
break
elif line[:9] == ' --More--':
ac_serial.write(ser, b' ')
ac_serial.write(ser, b'\r')
def step2(com):
ser = ac_serial.initSerial(com)
logged_in = False
heater_msg = False
autonomous = False
count = 0
for x in range(3):
ac_serial.write(ser, b'\r')
while True:
try:
line = ac_serial.read(ser)
except:
ac_serial.write(ser, b'\r')
time.sleep(1)
if line:
print(line)
if logged_in:
if line == 'ap>':
break
else:
if line[-22:] == 'existing image version':
ac_serial.write(ser, b'\r')
heater_msg = True
if heater_msg:
if line == 'ap>':
autonomous = True
ac_serial.write(ser, b'login\r')
time.sleep(3)
if line[:9] == 'Username:'******'cisco\r')
time.sleep(3)
if line[:9] == 'Password:'******'Cisco\r')
logged_in = True
ser.close()
def step6(com, vehicle):
print('Step 6')
ser = ac_serial.initSerial(com)
fleet_copy = False
command_copy = False
for x in range(3):
ac_serial.write(ser, b'\r')
while True:
try:
line = ac_serial.read(ser)
except:
pass
if line:
print(line)
else:
ac_serial.write(ser, b'\r')
if line == "ap#":
fleet_file = 'copy tftp://10.0.0.5/cb-{}-fleet.txt flash:'.format(
vehicle[0])
fleet_b = str.encode(fleet_file)
command_file = 'copy tftp://10.0.0.5/cb-{}-command.txt flash:'.format(
vehicle[0])
command_b = str.encode(command_file)
if not fleet_copy:
ac_serial.write(ser, fleet_b)
line = ac_serial.read(ser)
print(line)
time.sleep(1)
ac_serial.write(ser, b'\r')
line = ac_serial.read(ser)
print(line)
time.sleep(3)
ac_serial.write(ser, b'\r')
line = ac_serial.read(ser)
print(line)
time.sleep(2)
ac_serial.write(ser, b'\r')
line = ac_serial.read(ser)
print(line)
time.sleep(2)
fleet_copy = True
if not command_copy:
ac_serial.write(ser, b'\r')
line = ac_serial.read(ser)
print(line)
time.sleep(1)
ac_serial.write(ser, command_b)
line = ac_serial.read(ser)
print(line)
time.sleep(1)
ac_serial.write(ser, b'\r')
line = ac_serial.read(ser)
print(line)
time.sleep(3)
ac_serial.write(ser, b'\r')
line = ac_serial.read(ser)
print(line)
time.sleep(2)
ac_serial.write(ser, b'\r')
line = ac_serial.read(ser)
print(line)
time.sleep(1)
command_copy = True
if fleet_copy and command_copy:
return (True)
def step1(com):
print('Checking status....')
while True:
try:
ser = ac_serial.initSerial(com)
break
except serial.serialutil.SerialException:
input("Serial port in use, close putty.")
upgraded = False
loaded = False
command = False
fleet = False
sw_ver = 'None'
for x in range(3):
ac_serial.write(ser, b'\r')
time.sleep(0.5)
while True:
try:
line = ac_serial.read(ser)
except:
pass
if line:
print(line)
else:
ac_serial.write(ser, b'\r')
time.sleep(1)
if line == "ap>":
autonomous = True
if upgraded == False:
time.sleep(1)
ac_serial.write(ser, b'sh ver')
time.sleep(1)
line = ac_serial.read(ser)
print(line)
time.sleep(2)
ac_serial.write(ser, b'\r')
sw_ver = ac_serial.read(ser)
print('-----')
print(sw_ver)
print('-----')
if sw_ver[
-42:] == "Version 15.3(3)JI1, RELEASE SOFTWARE (fc1)":
upgraded = True
time.sleep(2)
elif sw_ver[
-42:] == "Version 15.3(3)JF5, RELEASE SOFTWARE (fc2)":
upgraded = False
time.sleep(2)
break
else:
break
if line == "ap#":
ac_serial.write(ser, b'exit\r')
print(ac_serial.read(ser))
if line == 'Press RETURN to get started.':
ac_serial.write(ser, b'\r')
if line[:9] == ' --More--':
ac_serial.write(ser, b' ')
ac_serial.write(ser, b'\r')
if line[-13:] == 'image version':
ac_serial.write(ser, b'\r')
if len(line) == 17 and line[:2] == 'AP':
autonomous = False
upgraded = False
command = False
fleet = False
break
elif line[-8:] == 'command#':
autonomous = True
upgraded = True
command = True
fleet = False
break
elif line[-6:] == 'fleet#':
autonomous = True
upgraded = True
command = True
fleet = True
break
ser.close()
return (autonomous, upgraded, command, fleet)
def step2p5(com):
print('Step 2.5')
ser = ac_serial.initSerial(com)
logged_in = False
enable = False
debug = False
finished_boot = False
for x in range(3):
ac_serial.write(ser, b'\r')
while True:
try:
line = ac_serial.read(ser)
except:
pass
if line:
print(line)
if logged_in:
if enable and not debug:
ac_serial.write(ser, b'debug capwap console cli')
time.sleep(1)
ac_serial.write(ser, b'\n')
debug = True
if enable and debug:
if line[-11:] == '(yes/[no]):':
ac_serial.write(ser, b'yes')
time.sleep(1)
ac_serial.write(ser, b'\n')
elif len(line) == 17 and line[:2] == 'AP':
ac_serial.write(ser, b'capwap ap autonomous')
line = ac_serial.read(ser)
print(line)
time.sleep(1)
ac_serial.write(ser, b'\n')
line = ac_serial.read(ser)
print(line)
ac_serial.write(ser, b'yes')
time.sleep(1)
ac_serial.write(ser, b'\n')
line = ac_serial.read(ser)
print(line)
break
elif line[-1:] == '#':
time.sleep(1)
ac_serial.write(ser, b'\n')
else:
if len(line) == 17 and line[:2] == 'AP':
time.sleep(1)
ac_serial.write(ser, b'en')
line = ac_serial.read(ser)
print(line)
time.sleep(1)
ac_serial.write(ser, b'\n')
line = ac_serial.read(ser)
print(line)
time.sleep(1)
if line[:9] == 'Password:'******'Cisco')
time.sleep(0.5)
ac_serial.write(ser, b'\n')
enable = True
else:
if finished_boot:
if len(line) == 17 and line[:2] == 'AP':
time.sleep(1)
ac_serial.write(ser, b'login')
line = ac_serial.read(ser)
print(line)
time.sleep(1)
ac_serial.write(ser, b'\r')
line = ac_serial.read(ser)
print(line)
time.sleep(3)
line = ac_serial.read(ser)
print(line)
if line[:9] == 'Username:'******'cisco\r')
line = ac_serial.read(ser)
print(line)
time.sleep(3)
if line[:9] == 'Password:'******'Cisco')
time.sleep(3)
line = ac_serial.read(ser)
print(line)
ac_serial.write(ser, b'\r')
line = ac_serial.read(ser)
print(line)
logged_in = True
else:
print("Waiting for the bootup to complete...")
if line[-25:] == 'Invoking capwap discovery':
finished_boot = True
elif line[:2] == 'AP':
finished_boot = True
return (True, False)