def beam_ex1():
"""
:return:
"""
bm = Beam("MyBeam", (0, 0, 0), (1.5, 0, 0), "IPE400")
a = Assembly("Test", creator="Kristoffer H. Andersen") / [Part("MyPart") / bm]
h = 0.2
r = 0.02
normal = [0, 1, 0]
xdir = [-1, 0, 0]
# Polygon Extrusions
origin = np.array([0.2, -0.1, -0.1])
points = [(0, 0), (0.1, 0), (0.05, 0.1)]
bm.add_penetration(PrimExtrude("Poly1", points, h, normal, origin, xdir))
origin += np.array([0.2, 0, 0])
points = [(0, 0, r), (0.1, 0, r), (0.05, 0.1, r)]
bm.add_penetration(PrimExtrude("Poly2", points, h, normal, origin, xdir))
origin += np.array([0.2, 0, 0])
points = [(0, 0, r), (0.1, 0, r), (0.1, 0.2, r), (0.0, 0.2, r)]
bm.add_penetration(PrimExtrude("Poly3", points, h, normal, origin, xdir))
# Cylinder Extrude
x = origin[0] + 0.2
bm.add_penetration(PrimCyl("cylinder", (x, -0.1, 0), (x, 0.1, 0), 0.1))
# Box Extrude
x += 0.2
bm.add_penetration(PrimBox("box", (x, -0.1, -0.1), (x + 0.2, 0.1, 0.1)))
# Create a FEM analysis of the beam as a cantilever subjected to gravity loads
create_beam_mesh(bm, a.get_part("MyPart").fem, "shell")
# Add a set containing ALL elements (necessary for Calculix loads).
fs = a.fem.add_set(FemSet("Eall", [el for el in a.get_part("MyPart").fem.elements.elements], "elset"))
step = a.fem.add_step(Step("gravity", "static", nl_geom=True, init_incr=100.0, total_time=100.0))
step.add_load(Load("grav", "gravity", -9.81, fem_set=fs))
a.fem.add_bc(Bc("Fixed", FemSet("bc_nodes", get_beam_end_nodes(bm), "nset"), [1, 2, 3]))
return a
def pfem():
a = Assembly() / (Part("BeamFEM") / Beam(
"bm1", n1=[0, 0, 0], n2=[2, 0, 0], sec="IPE220", colour="red"))
part = a.get_part("BeamFEM")
with GmshSession(silent=True) as gs:
gs.add_obj(a.get_by_name("bm1"), geom_repr="line")
gs.mesh(0.1)
part.fem = gs.get_fem()
return part
def test_merge_materials():
plates = []
for i in range(1, 10):
mat = Material(f"mat{i}", CarbonSteel("S355"))
plates.append(
Plate(f"pl{i}", [(0, 0, 0), (0, 1, 0), (1, 1, 0)], 20e-3, mat=mat))
a = Assembly() / (Part("MyPart") / plates)
p = a.get_part("MyPart")
mats = p.materials
assert len(mats) == 9
mats.merge_materials_by_properties()
assert len(mats) == 1
def beam_ex1(p1=(0, 0, 0), p2=(1.5, 0, 0), profile="IPE400", geom_repr=ElemType.SHELL) -> Assembly:
mat_grade = CarbonSteel.TYPES.S355
bm = Beam("MyBeam", p1, p2, profile, Material("S355", mat_model=CarbonSteel(mat_grade)))
bm.material.model.plasticity_model = DnvGl16Mat(bm.section.t_w, mat_grade)
a = Assembly("Test", user=User("krande")) / [Part("MyPart") / bm]
add_random_cutouts(bm)
# Create a FEM analysis of the beam as a cantilever subjected to gravity loads
p = a.get_part("MyPart")
p.fem = bm.to_fem_obj(0.1, geom_repr)
# Add a set containing ALL elements (necessary for Calculix loads).
fs = p.fem.add_set(FemSet("Eall", [el for el in p.fem.elements], FemSet.TYPES.ELSET))
step = a.fem.add_step(StepImplicit("gravity", nl_geom=True, init_incr=100.0, total_time=100.0))
step.add_load(Load("grav", Load.TYPES.GRAVITY, -9.81 * 800, fem_set=fs))
fix_set = p.fem.add_set(FemSet("bc_nodes", get_beam_end_nodes(bm), FemSet.TYPES.NSET))
a.fem.add_bc(Bc("Fixed", fix_set, [1, 2, 3]))
return a