def scan(self):
print("Welcome. This will help you to scan for alienfx-controllers and their lightning zones.")
afxcontroldevs=AlienFXProber.find_controllers(self.vendorid) # Get a list of all usb-devices with the given vendor-id
for controller in afxcontroldevs:
# Perform zone scanning for each controller found...
zone = 1 # initial zone from which we start iterating
vendorstring = "0x" + format(controller.idVendor, '04x')
devicestring = "0x" + format(controller.idProduct, '04x')
print("Found device \""+vendorstring + " / " + devicestring + "\". ")
if self.askuser("Would you like to test a newer controller? Default=Y\r\n"
"Note that choosing a wrong controller will result in packet-errors.\r\n"
"In this case you might choose another one instead."):
crev=2 # newer controller revision
else:
crev=1 # old controller revision
print("- Testing zones...")
while zone <= self.maxzone:
# Iterate all possible zone codes (have a look at reverse-engineering-knowledgebase.txt for possible codes...)
print("Testing zone \"0x"+format(zone, '04x')+"\"")
if self.scanzone(zone, crev, controller.idVendor, controller.idProduct):
# Zone found
print("Zone found :)")
# Ask user for a name, store name and zonecode
zonename = self.askzonename()
self.zonesfound[zonename] = zone # Store name an zone code in Dictionary
zone = zone*2
print("")
print("These are your " + str(len(self.zonesfound.items())) + " zonecodes for the current controller (\"VID: "+vendorstring + " / DEV: " + devicestring + "\"):")
for z in self.zonesfound.items():
print(z[0]+": 0x"+format(z[1], '04x')) # Print out each zone found
print("")
print("Current controller finished.")
print("All controllers done. I hope i was helpful.")
def scan(self):
print("Welcome. This will help you to scan for alienfx-controllers and their lightning zones.")
afxcontroldevs=AlienFXProber.find_controllers(self.vendorid) # Get a list of all usb-devices with the given vendor-id
for controller in afxcontroldevs:
# Perform zone scanning for each controller found...
zone = 1 # initial zone from which we start iterating
vendorstring = "0x" + format(controller.idVendor, '04x')
devicestring = "0x" + format(controller.idProduct, '04x')
print("Found device \""+vendorstring + " / " + devicestring + "\". - Testing zones...")
while zone <= self.maxzone:
# Iterate all possible zone codes (have a look at reverse-engineering-knowledgebase.txt for possible codes...)
print("Testing zone \"0x"+format(zone, '04x')+"\"")
if self.scanzone(zone, "new", controller.idVendor, controller.idProduct):
# Zone found
print("Zone found :)")
# Ask user for a name, store name and zonecode
zonename = self.askzonename()
self.zonesfound[zonename] = zone # Store name an zone code in Dictionary
zone = zone*2
print("")
print("These are your " + str(len(self.zonesfound.items())) + " zonecodes for the current controller (\"VID: "+vendorstring + " / DEV: " + devicestring + "\"):")
for z in self.zonesfound.items():
print(z[0]+": 0x"+format(z[1], '04x')) # Print out each zone found
print("")
print("Current controller finished.")
print("All controllers done. I hope i was helpful.")
def __init__(self):
Gtk.Application.__init__(self)
self.connect("activate", self.on_activate)
self.controller = AlienFXProber.get_controller()
self.themefile = AlienFXThemeFile(self.controller)
self.selected_action = None
self.action_type = self.themefile.KW_ACTION_TYPE_FIXED
self.theme_edited = False
self.set_theme_done = True
def start():
""" Main entry point for the alienfx cli."""
controller = AlienFXProber.get_controller()
if controller is None:
logging.error("No supported Alien FX controllers found!")
quit()
themefile = alienfx_themefile.AlienFXThemeFile(controller)
try:
argparser = argparse.ArgumentParser(
description="""AlienFX is a utility to control the lighting effects
of your Alienware computer.
Lighting effect configurations are stored in theme files."""
)
argparser.add_argument(
"-l", "--log", help="write detailed logging information to LOG"
)
argparser.add_argument(
"-t", "--theme",
help="set the lighting theme to THEME."
)
argparser.add_argument(
"-s", "--list", action="store_const", const=1,
help="list all available lighting themes"
)
argparser.add_argument(
"-v", "--version", action="version",
version="%(prog)s {}".format(alienfx.common.get_version())
)
args = argparser.parse_args()
if args.log is not None:
alienfx_logger.set_logfile(args.log)
if args.list is not None:
print "Available themes:"
themes = themefile.get_themes()
for t in themes:
print "\t{}".format(t)
elif args.theme is not None:
themefile.load(args.theme)
controller.set_theme(themefile)
themefile.applied()
except Exception as e:
logging.error(e)
def start():
""" Main entry point for the alienfx cli."""
controller = AlienFXProber.get_controller()
if controller is None:
logging.error("No supported Alien FX controllers found!")
quit()
themefile = alienfx_themefile.AlienFXThemeFile(controller)
try:
argparser = argparse.ArgumentParser(
description="""AlienFX is a utility to control the lighting effects
of your Alienware computer.
Lighting effect configurations are stored in theme files.""")
argparser.add_argument(
"-l", "--log", help="write detailed logging information to LOG")
argparser.add_argument("-t",
"--theme",
help="set the lighting theme to THEME.")
argparser.add_argument("-s",
"--list",
action="store_const",
const=1,
help="list all available lighting themes")
argparser.add_argument("-v",
"--version",
action="version",
version="%(prog)s {}".format(
alienfx.common.get_version()))
args = argparser.parse_args()
if args.log is not None:
alienfx_logger.set_logfile(args.log)
if args.list is not None:
print "Available themes:"
themes = themefile.get_themes()
for t in themes:
print "\t{}".format(t)
elif args.theme is not None:
themefile.load(args.theme)
controller.set_theme(themefile)
themefile.applied()
except Exception as e:
logging.error(e)
def scan(self):
print(
"Welcome. This will help you to scan for alienfx-controllers and their lightning zones."
)
afxcontroldevs = AlienFXProber.find_controllers(
self.vendorid
) # Get a list of all usb-devices with the given vendor-id
for controller in afxcontroldevs:
# Perform zone scanning for each controller found...
zone = 1 # initial zone from which we start iterating
vendorstring = "0x" + format(controller.idVendor, '04x')
devicestring = "0x" + format(controller.idProduct, '04x')
print("Found device \"" + vendorstring + " / " + devicestring +
"\". - Testing zones...")
while zone <= self.maxzone:
# Iterate all possible zone codes (have a look at reverse-engineering-knowledgebase.txt for possible codes...)
print("Testing zone \"0x" + format(zone, '04x') + "\"")
if self.scanzone(zone, "new", controller.idVendor,
controller.idProduct):
# Zone found
print("Zone found :)")
# Ask user for a name, store name and zonecode
zonename = self.askzonename()
self.zonesfound[
zonename] = zone # Store name an zone code in Dictionary
zone = zone * 2
print("These are your zonecodes for current controller (\"" +
vendorstring + " / " + devicestring + "\"):")
for z in self.zonesfound.items():
print(z[0] + ": 0x" +
format(z[1], '04x')) # Print out each zone found
print("")
print("Current controller finished.")
print("All controllers done. I hope i was helpful.")
def start():
""" Main entry point for the alienfx cli."""
print("You are running alienfx under Python-Version: " + sys.version)
# You may switch the commenting of the following 2 lines to force zonescan-execution
controller = AlienFXProber.get_controller(
) # DEBUG: you may comment this out for development of zonescanner
# controller = None # DEBUG: you may uncomment this out for development of zonescanner
if controller is None:
logging.error(
"No Alien FX controller, defined by a supported model, found!")
logging.info("Asking user for zone probing...")
# print("No Alien FX controller, defined by a supported model, found.")
if askuser("Would you like to perform a zonescan?"):
# User answered yes: Zonescan should be performed
doZonescan()
print("Zonescan finished")
logging.info("Zonescan finished")
return True
else:
# No Zonescan should be performed
print("OK. Bye.")
logging.info("Zonescanning not performed")
quit() # Finish
themefile = alienfx_themefile.AlienFXThemeFile(controller)
try:
argparser = argparse.ArgumentParser(
description="""AlienFX is a utility to control the lighting effects
of your Alienware computer.
Lighting effect configurations are stored in theme files.""")
argparser.add_argument(
"-l", "--log", help="write detailed logging information to LOG")
argparser.add_argument("-t",
"--theme",
help="set the lighting theme to THEME.")
argparser.add_argument("-s",
"--list",
action="store_const",
const=1,
help="list all available lighting themes")
argparser.add_argument("-v",
"--version",
action="version",
version="%(prog)s {}".format(
alienfx.common.get_version()))
argparser.add_argument("-z",
"--zonescan",
action="store_true",
help="starts a zonescan")
args = argparser.parse_args()
if args.zonescan is not None:
if args.zonescan:
doZonescan()
return True
if args.log is not None:
alienfx_logger.set_logfile(args.log)
if args.list is not None:
print("Available themes:")
themes = themefile.get_themes()
for t in themes:
print(("\t{}").format(t))
elif args.theme is not None:
themefile.load(args.theme)
controller.set_theme(themefile)
themefile.applied()
except Exception as e:
logging.error(e)
def start():
""" Main entry point for the alienfx cli."""
print("You are running alienfx under Python-Version: "+sys.version)
# You may switch the commenting of the following 2 lines to force zonescan-execution
controller = AlienFXProber.get_controller() # DEBUG: you may comment this out for development of zonescanner
# controller = None # DEBUG: you may uncomment this out for development of zonescanner
if controller is None:
logging.error("No Alien FX controller, defined by a supported model, found!")
logging.info("Asking user for zone probing...")
# print("No Alien FX controller, defined by a supported model, found.")
if askuser("Would you like to perform a zonescan?"):
# User answered yes: Zonescan should be performed
doZonescan()
print("Zonescan finished")
logging.info("Zonescan finished")
return True
else:
# No Zonescan should be performed
print("OK. Bye.")
logging.info("Zonescanning not performed")
quit() # Finish
themefile = alienfx_themefile.AlienFXThemeFile(controller)
try:
argparser = argparse.ArgumentParser(
description="""AlienFX is a utility to control the lighting effects
of your Alienware computer.
Lighting effect configurations are stored in theme files."""
)
argparser.add_argument(
"-l", "--log", help="write detailed logging information to LOG"
)
argparser.add_argument(
"-t", "--theme",
help="set the lighting theme to THEME."
)
argparser.add_argument(
"-s", "--list", action="store_const", const=1,
help="list all available lighting themes"
)
argparser.add_argument(
"-v", "--version", action="version",
version="%(prog)s {}".format(alienfx.common.get_version())
)
argparser.add_argument(
"-z", "--zonescan", action="store_true", help="starts a zonescan"
)
args = argparser.parse_args()
if args.zonescan is not None:
if args.zonescan:
doZonescan()
return True
if args.log is not None:
alienfx_logger.set_logfile(args.log)
if args.list is not None:
print("Available themes:")
themes = themefile.get_themes()
for t in themes:
print(("\t{}").format(t))
elif args.theme is not None:
themefile.load(args.theme)
controller.set_theme(themefile)
themefile.applied()
except Exception as e:
logging.error(e)