def analyze_SP_RO(sp_file, params,folder='',plot=True,save=True,do_print=False,ret = False,name='spin_pumping.png'):
'''
Function to plot and fit a single SP or RO curve.
sp_file string (part of) the filename that contains data of interest
folder string folder that contains the data
'''
if folder == '':
folder = os.getcwd()
v = load(folder+'\\'+sp_file)
Ex_RO_power = params['Ex_RO_amplitude']
A_RO_power = params['Ex_RO_amplitude']
Ex_SP_power = params['Ex_SP_amplitude']
A_SP_power = params['A_SP_amplitude']
if 'Spin_RO' in sp_file:
sp_counts = sum(v['counts'],axis=0)
title = 'RO Powers: Ex = ' + str(Ex_RO_power*1E9) + 'nW, A = ' + str(A_RO_power*1E9) + 'nW'
else:
sp_counts = v['counts']
title = 'SP Powers: Ex = ' + str(Ex_SP_power*1E9) + 'nW, A = ' + str(A_SP_power*1E9) + 'nW'
sp_time = v['time']
v.close()
offset_guess = sp_counts[len(sp_counts)-1]
init_amp_guess = max(sp_counts)
firstpoint=int(find_nearest(sp_counts,init_amp_guess))
decay_guess = 10
if plot:
figure4 = plt.figure(4)
plt.clf()
fit_result=fit.fit1d(sp_time[firstpoint:len(sp_counts)-1]/1E3, sp_counts[firstpoint:len(sp_counts)-1], common.fit_exp_decay_with_offset,
offset_guess, init_amp_guess, decay_guess,
do_plot = plot, do_print = do_print, newfig = False, ret=True,
plot_fitparams_xy = (0.5,0.5))
if plot:
plt.plot(sp_time/1E3,sp_counts,'sg')
plt.xlabel('Time ($\mu$s)')
plt.ylabel('Integrated counts')
plt.title(title)
plt.ylim(ymax=max(sp_counts)*1.2)
plt.text(0.01*(max(sp_time/1E3)+min(sp_time/1E3)),1.15*max(sp_counts),folder+sp_file,fontsize='x-small')
if save:
figure4.savefig(folder+'\\'+name+'.png')
if ret:
return fit_result
def calibrate(self, steps): # calibration values in uW
rng = arange(0,steps)
x = zeros(steps,dtype = float)
y = zeros(steps,dtype = float)
self.apply_voltage(0)
self._ins_pm.set_wavelength(self._wavelength*1e9)
time.sleep(2)
bg = self._ins_pm.get_power()
print 'background power: %.4f uW' % (bg*1e6)
time.sleep(2)
V_max = self.get_V_max()
V_min = self.get_V_min()
if V_max + V_min < 0: rng=flipud(rng)
for a in rng:
x[a] = a*(V_max-V_min)/float(steps-1)+V_min
self.apply_voltage(x[a])
time.sleep(1)
y[a] = self._ins_pm.get_power() - bg
print 'measured power at %.2f V: %.4f uW' % \
(a*(V_max-V_min)/float(steps-1)+V_min, y[a]*1e6)
#x= x*(V_max-V_min)/float(steps-1)+V_min
a, xc, k = copysign(max(y), V_max + V_min), copysign(.5, V_max + V_min), copysign(5., V_max + V_min)
fitres = fit.fit1d(x,y, common.fit_AOM_powerdependence,
a, xc, k, do_print=True, do_plot=False, ret=True)
fd = zeros(len(x))
if type(fitres) != type(False):
p1 = fitres['params_dict']
self.set_cal_a(p1['a'])
self.set_cal_xc(p1['xc'])
self.set_cal_k(p1['k'])
fd = fitres['fitdata']
else:
print 'could not fit calibration curve!'
dat = qt.Data(name= 'aom_calibration_'+self._name+'_'+\
self._cur_controller)
dat.add_coordinate('Voltage [V]')
dat.add_value('Power [W]')
dat.add_value('fit')
dat.create_file()
plt = qt.Plot2D(dat, 'rO', name='aom calibration', coorddim=0, valdim=1,
clear=True)
plt.add_data(dat, coorddim=0, valdim=2)
dat.add_data_point(x,y,fd)
dat.close_file()
plt.save_png(dat.get_filepath()+'png')
self.save_cfg()
print (self._name+' calibration finished')
def plot_esr(datapath,
fit_data=True,
save=True,
f_dip=2.828E9,
msplusone=False,
Zsplitting=35e6):
plt.close('all')
###########################################
######## MEASUREMENT SPECS ################
###########################################
files = os.listdir(datapath)
for k in files:
if '.npz' in k:
data_file = k
data = np.load(datapath + '\\' + data_file)
mw_freq = data['freq']
counts = data['counts']
data.close()
f_dip_guess = f_dip
offset_guess = counts.max()
dip_depth_guess = offset_guess - counts.min()
width_guess = 5e-3
if msplusone:
noof_dips = 2
dip_separation = Zsplitting
else:
noof_dips = 1
dip_separation = 0
if fit_data:
figure2 = plt.figure(2)
figure2.clf()
fit_res = fit.fit1d(mw_freq / 1E9,
counts,
common.fit_gauss,
offset_guess,
dip_depth_guess,
f_dip_guess / 1E9,
width_guess,
do_plot=True,
do_print=True,
newfig=False)
print fit_res
plt.plot(mw_freq / 1E9, counts, '-k')
plt.xlabel('MW frequency (GHz)')
plt.ylabel('Integrated counts')
plt.title('MW frequency sweep')
#, power = '+num2str(mwpower,0)+' dBm)
#plt.text(0.1*(mw_max_freq+mw_min_freq),max(counts_during_readout),datapath)
if save:
figure2.savefig(datapath + '\\esr_data.png')
def calibrate(self, steps): # calibration values in uW
x = arange(0,steps)
y = zeros(steps,dtype = float)
self.apply_voltage(0)
ins_pm.set_wavelength(self._wavelength*1e9)
time.sleep(2)
bg = ins_pm.get_power()
print 'background power: %.4f uW' % (bg*1e6)
time.sleep(2)
V_max = self.get_V_max()
for a in x:
self.apply_voltage(a*V_max/(steps-1))
time.sleep(1)
y[a] = ins_pm.get_power() - bg
print 'measured power at %.2f V: %.4f uW' % \
(a/float(steps-1)*V_max, y[a]*1e6)
x = x/float(steps-1)*V_max
a, xc, k = max(y), .5, 5.
fitres = fit.fit1d(x,y, common.fit_AOM_powerdependence,
a, xc, k, do_print=True, do_plot=False, ret=True)
fd = zeros(len(x))
if type(fitres) != type(False):
p1 = fitres['params_dict']
self.set_cal_a(p1['a'])
self.set_cal_xc(p1['xc'])
self.set_cal_k(p1['k'])
fd = fitres['fitdata']
else:
print 'could not fit calibration curve!'
dat = qt.Data(name='aom_calibration_'+self._name+'_'+\
self._cur_controller)
dat.add_coordinate('Voltage [V]')
dat.add_value('Power [W]')
dat.add_value('fit')
dat.create_file()
plt = qt.Plot2D(dat, 'rO', name='aom calibration', coorddim=0, valdim=1,
clear=True)
plt.add_data(dat, coorddim=0, valdim=2)
dat.add_data_point(x,y,fd)
dat.close_file()
self.save_cfg()
print (self._name+' calibration finished')
def spin_flip_time_vs_MW_freq(folder='', x_axis_par='par_MW_freq'):
if folder == '':
folder = os.getcwd()
print get_param_column(os.path.join(folder,'SSRO_preselect-0_parameters.dat'),'par_cr_threshold')
allfiles = os.listdir(folder)
rofiles = [f for f in allfiles if ('_ro_countrate' in f and '.dat' in f)]
x_axis = []
spin_flip_time = []
for f in rofiles:
fn, ext = os.path.splitext(f)
print fn
idx = int(fn[fn.find('SSRO_preselect-')+15:fn.find('_ro_countrate')])
basepath = os.path.join(folder, PREFIX+'-'+str(idx))
parfile = basepath+'_'+PARAMS_SUFFIX+'.dat'
x_axis.append(loadtxt(parfile)[get_param_column(parfile,x_axis_par)]/1.0e9) #MW freq in GHz
ro_data= loadtxt(f)
t = ro_data[:,0]/1000 #time in us
y = ro_data[:,1] #cnts
#a : offset ~ 0, A : Amplitude, tau : spin_flip_time ~ 20 us
a, A, tau = 0, max(y), 20
#debug: CHECKING TODO
print idx
print 't', t
print 'y' , y
#break
fitres = fit.fit1d(t,y, common.fit_exp_decay_with_offset, \
a, A, tau, do_print=True, do_plot=False, ret=True)
if type(fitres) != type(False):
p1 = fitres['params_dict']
spin_flip_time.append(p1['tau'])
else:
print 'could not fit exponential curve for file index ', idx
fig = plt.figure()
plt.plot(x_axis, spin_flip_time, 'ro', label='spin flip time vs MW freq')
plt.xlabel('MW frequqncy [GHz]')
plt.ylabel('spin flip time [ns]')
plt.legend()
def plot_esr(datapath, fit_data = True, save = True, f_dip = 2.828E9,msplusone=False,Zsplitting=35e6):
plt.close('all')
###########################################
######## MEASUREMENT SPECS ################
###########################################
files = os.listdir(datapath)
for k in files:
if '.npz' in k:
data_file = k
data = np.load(datapath+'\\'+data_file)
mw_freq = data['freq']
counts = data['counts']
data.close()
f_dip_guess=f_dip
offset_guess = counts.max()
dip_depth_guess = offset_guess - counts.min()
width_guess = 5e-3
if msplusone:
noof_dips = 2
dip_separation = Zsplitting
else:
noof_dips = 1
dip_separation=0
if fit_data:
figure2 = plt.figure(2)
figure2.clf()
fit_res=fit.fit1d(mw_freq/1E9, counts, common.fit_gauss,
offset_guess, dip_depth_guess, f_dip_guess/1E9,width_guess,
do_plot = True, do_print = True, newfig = False)
print fit_res
plt.plot(mw_freq/1E9,counts, '-k')
plt.xlabel('MW frequency (GHz)')
plt.ylabel('Integrated counts')
plt.title('MW frequency sweep')
#, power = '+num2str(mwpower,0)+' dBm)
#plt.text(0.1*(mw_max_freq+mw_min_freq),max(counts_during_readout),datapath)
if save:
figure2.savefig(datapath+'\\esr_data.png')
def rabi_calibration(datapath,fit_data = True, save = True,close_fig=True,new_fig=True):
"""
Fits results from a spin_control data using a FFT.
Datapath should be a folder that contains the actual measurement results,
so for example: datapath = 'D:\data\yyyymmdd\hhmmss_spin_control_suffix'
Flag fit_data if data should be fit.
Flag save if data should be saved (in the data directory)
"""
print 'Analyzing spin control data...'
# Create directories for saving figures and saving processed data:
if not os.path.exists(os.path.join(datapath,'figures')):
os.makedirs(os.path.join(datapath,'figures'))
if not os.path.exists(os.path.join(datapath,'processed_data')):
os.makedirs(os.path.join(datapath,'processed_data'))
###########################################
######## MEASUREMENT SPECS ################
###########################################
files = os.listdir(datapath)
for k in files:
if 'statics_and_parameters.npz' in k:
stats_params_file = k
if 'Spin_RO.npz' in k:
spin_ro_file = k
if 'SP_histogram.npz' in k:
sp_file = k
e = np.load(datapath+'\\'+stats_params_file)
f_drive = e['mw_drive_freq']
mwpower = e['mw_power']
mw_min_len = e['min_sweep_par']
mw_max_len = e['max_sweep_par']
name=e['sweep_par_name']
noof_datapoints = e['noof_datapoints']
e.close()
###########################################
######## SPIN RO #########################
###########################################
g = np.load(datapath+'\\'+spin_ro_file)
raw_counts = g['counts']
SSRO_raw = g['SSRO_counts']
repetitions = g['sweep_axis']
t = g['time']
tot_size = len(repetitions)
reps_per_point = tot_size/float(noof_datapoints)
idx = 0
counts_during_readout = np.zeros(noof_datapoints)
mw_len = np.linspace(mw_min_len,mw_max_len,noof_datapoints)
counts_during_readout = np.sum(raw_counts, axis = 1)
SSRO = np.zeros(noof_datapoints)
SSRO = np.sum(SSRO_raw, axis = 1)
#########################################
############ FITTING ####################
#########################################
if fit_data:
FFT = np.fft.fft(SSRO)
N = int(noof_datapoints)
timestep = (mw_max_len-mw_min_len)/float(noof_datapoints-1)
freq = np.fft.fftfreq(N,d = timestep)
#Remove offset:
FFT[freq == 0] = 0
plot1 = qt.Plot2D(freq*1E3, abs(FFT), 'sb',name='FFT',clear=True)
plot1.set_xlabel('Frequency (MHz)')
plot1.set_ylabel('Amplitude')
plot1.set_plottitle('FFT (offset removed)')
plot1.set_title('FFT')
if save:
plot1.save_png(os.path.join(datapath, 'figures', 'fft_signal_rabi.png'))
freq_guess = freq[find_nearest(abs(FFT),abs(FFT).max())]
amp_guess = (SSRO.max()+SSRO.min())/2.0
offset_guess = SSRO.min()+(SSRO.max()+\
SSRO.min())/2.0
phase_guess = 0
#print 'frequency guess = ',freq_guess
fit_result = fit.fit1d(mw_len, SSRO, rabi.fit_rabi_simple,
freq_guess, amp_guess, offset_guess, phase_guess,
do_plot = False, ret = True)
print fit_result
f = fit_result['params_dict']['f']
a = fit_result['params_dict']['a']
A = fit_result['params_dict']['A']
phi = fit_result['params_dict']['phi']
x = np.linspace(mw_min_len, mw_max_len, 501)
fit_curve = a + A*np.cos(2*np.pi*(f*x + phi/360))
pi_pulse_len = 0.5*1/f
pi_2_pulse_len = 0.5*pi_pulse_len
name= spin_ro_file[:len(spin_ro_file)-16]
if new_fig:
plot2 = qt.Plot2D(mw_len, SSRO, 'sk',
title=name, name='MWCal',clear=True)
plot2.add(x,fit_curve, '-r',title='fit '+name)
else:
plot2 = qt.plots['Cal']
plot2.add(mw_len, SSRO, 'xk',title=name)
plot2.add(x,fit_curve, '-r',title='fit '+name)
plot2.set_xlabel(name)
plot2.set_ylabel('SSRO (not corrected)')
plot2.set_plottitle(str(name) + ' , driving f ='+num2str(f_drive/1E6,1)+\
' MHz, power = '+num2str(mwpower,0)+' dBm'+datapath)
#plot2.text(0.1*(mw_max_len+mw_min_len),max(SSRO),datapath)
if save:
plot2.save_png(os.path.join(datapath,'figures', 'histogram_integrated'))
g.close()
plot1.clear()
plot1.quit()
if close_fig:
plot2.clear()
plot2.quit()
if save:
#Save a dat file for use in e.g. Origin with the rabi oscillation.
curr_date = '#'+time.ctime()+'\n'
col_names = '#Col0: MW length (ns)\tCol1: SSRO\n'
col_vals = str()
for k in np.arange(noof_datapoints):
col_vals += num2str(mw_len[k],2)+'\t'+num2str(SSRO[k],0)+'\n'
fo = open(os.path.join(datapath, 'processed_data', 'mw_pi_calibration_SSRO.dat'), "w")
for item in [curr_date, col_names, col_vals]:
fo.writelines(item)
fo.close()
if 'len' in name:
minimum = pi_pulse_len
else:
minimum=x[find_nearest(fit_curve,fit_curve.min())]
rabi_dict={"minimum":minimum,"Amplitude":A,"offset":a, "freq":f,"lowest_meas_value":SSRO.min()}
return rabi_dict
data = load('Rabi-0_SpinReadout.npz')
j = 0
time = []
counts = []
for i in data['MW burst time']:
time.append(i)
print j
counts.append(sum(data['counts'][j]))
j = j + 1
amp = (max(counts) - min(counts)) / 2.
offset = (max(counts) + min(counts)) / 2.
freq = 0.001
decay = 500.
plt.plot(time, counts, 'o')
fit_result = fit.fit1d(np.array(time),
np.array(counts),
rabi.fit_rabi_damped_exp,
freq,
amp,
offset,
decay,
do_plot=True,
ret=True)
plt.show()
plt.savefig('rabi_fitted.png')
def plot_SE(datapath, fid=(0.82,0.9),fiderr=(0.01,0.01),fit_data = True, exp_guess=2.8, save = True):
plt.close('all')
###########################################
######## MEASUREMENT SPECS ################
###########################################
files = os.listdir(datapath)
for k in files:
if 'statics_and_parameters.npz' in k:
stats_params_file = k
if 'Spin_RO.npz' in k:
spin_ro_file = k
if 'SP_histogram.npz' in k:
sp_file = k
e = np.load(datapath+'\\'+stats_params_file)
f_drive = e['mw_drive_freq']
mwpower = e['mw_power']
tau_max = e['tau_max']
tau_min = e['tau_min']
#frabi = e['frabi']
frabi=11.
noof_datapoints = e['noof_datapoints']
noof_reps = e['completed_repetitions']
e.close()
###########################################
######## SPIN RO #########################
###########################################
f = np.load(datapath+'\\'+spin_ro_file)
raw_counts = f['counts']
SSRO_counts = f['SSRO_counts']
repetitions = f['sweep_axis']
t = f['time']
tot_size = len(repetitions)
reps_per_point = tot_size/float(noof_datapoints)
idx = 0
counts_during_readout = zeros(noof_datapoints)
tau_free_evol = linspace(tau_min,tau_max,noof_datapoints)*2e-3
counts_during_readout = sum(raw_counts, axis = 1)
SSRO_readout = sum(SSRO_counts, axis = 1)/float(noof_reps)
SSRO_readout_corr = zeros(len(SSRO_readout))
readout_error = zeros(len(SSRO_readout))
for i in arange(len(SSRO_readout)):
ms0_events = SSRO_readout[i]*noof_reps
ms1_events = noof_reps*(1-SSRO_readout[i])
corr = SSRO_correct(array([ms1_events,ms0_events]),F0=fid[0],F1=fid[1],F0err=fiderr[0],F1err=fiderr[1])
SSRO_readout_corr[i]=corr[0][0]
readout_error[i] = corr[1][0]
#########################################
############ FITTING ####################
#########################################
#FIXME: write nice fitting routine for SE
figure2 = plt.figure(2)
plt.plot(tau_free_evol,counts_during_readout, 'sk')
plt.xlabel('Free evolution time [us]')
plt.ylabel('Integrated counts')
plt.title('Spin Echo, driving $f$ ='+num2str(f_drive/1E6,1)+\
' MHz, frabi = '+num2str(frabi,0)+' MHz')
plt.text(0.1*(max(tau_free_evol)+min(tau_free_evol)),max(counts_during_readout),datapath)
if save:
figure2.savefig(datapath+'\\histogram_integrated.png')
figure4 = plt.figure(4)
plt.plot(tau_free_evol,SSRO_readout, 'sk')
plt.xlabel('Free evolution time [us]')
plt.ylabel('Fraction of events >0 counts')
plt.title('Spin Echo SSRO cor, driving $f$ ='+num2str(f_drive/1E6,1)+\
' MHz, frabi = '+num2str(frabi,0)+' MHz')
plt.text(0.1*(max(tau_free_evol)+min(tau_free_evol)),max(SSRO_readout),datapath)
if save:
figure4.savefig(datapath+'\\SSRO_readout.png')
figure6 = plt.figure(6)
if fit_data:
tau_guess = 530
offset_guess = SSRO_readout_corr.min()
amp_guess=SSRO_readout_corr.max()-offset_guess
print tau_guess
print offset_guess
print amp_guess
print tau_guess
print exp_guess
print tau_free_evol
fitresult=fit.fit1d(tau_free_evol, SSRO_readout_corr,
SE.fit_echo, tau_guess, amp_guess,offset_guess,
exp_guess, do_plot = True, do_print = True, newfig = False)
print fitresult
plt.errorbar(tau_free_evol,SSRO_readout_corr,fmt='sk',yerr=readout_error)
plt.xlabel('Free evolution time [us]')
plt.ylabel('P ms=0')
plt.title('Spin Echo SSRO cor, driving $f$ ='+num2str(f_drive/1E6,1)+\
' MHz, frabi = '+num2str(frabi,0)+' MHz')
plt.text(0.1*(max(tau_free_evol)+min(tau_free_evol)),max(SSRO_readout_corr),datapath)
if save:
figure6.savefig(datapath+'\\SSRO_readout_corr.png')
x = 6.0
y = 8.0
figure3 = plt.figure(figsize=(x,y))
plt.pcolor(raw_counts, cmap = 'hot', antialiased=False)
plt.xlabel('Readout time (us)')
plt.ylabel('MW repetition number')
plt.title('Total histogram, integrated over repetitions')
plt.colorbar()
if save:
figure3.savefig(datapath+'\\histogram_counts_2d.png')
f.close()
###########################################
######## SPIN PUMPING #####################
###########################################
v = np.load(datapath+'\\'+sp_file)
sp_counts = v['counts']
sp_time = v['time']
offset_guess = sp_counts[len(sp_counts)-1]
init_amp_guess = sp_counts[2]
decay_guess = 10
figure5 = plt.figure(5)
fit.fit1d(sp_time/1E3, sp_counts, common.fit_exp_decay_with_offset,
offset_guess, init_amp_guess, decay_guess,
do_plot = True, do_print = True, newfig = False,
plot_fitparams_xy = (0.5,0.5))
plt.plot(sp_time/1E3,sp_counts,'sg')
plt.xlabel('Time ($\mu$s)')
plt.ylabel('Integrated counts')
plt.title('Spin pumping')
v.close()
if save:
figure5.savefig(datapath+'\\spin_pumping.png')
#Save a dat file for use in e.g. Origin with the rabi oscillation.
curr_date = '#'+time.ctime()+'\n'
col_names = '#Col0: Interpulse delay (ns)\tCol1: Integrated counts\tCol2: SSRO corr\n'
col_vals = str()
for k in arange(noof_datapoints):
col_vals += num2str(tau_free_evol[k],2)+'\t'+num2str(counts_during_readout[k],0)+'\t'+num2str(SSRO_readout_corr[k],2)+'\n'
fo = open(datapath+'\\integrated_histogram.dat', "w")
for item in [curr_date, col_names, col_vals]:
fo.writelines(item)
fo.close()
return True
def plot_ramsey(datapath, fit_data = True, save = True):
plt.close('all')
###########################################
######## MEASUREMENT SPECS ################
###########################################
files = os.listdir(datapath)
for k in files:
if 'statics_and_parameters.npz' in k:
stats_params_file = k
if 'Spin_RO.npz' in k:
spin_ro_file = k
if 'SP_histogram.npz' in k:
sp_file = k
e = np.load(datapath+'\\'+stats_params_file)
f_drive = e['mw_drive_freq']
detuning = e['detuning']
mwpower = e['mw_power']
tau_max = e['tau_min']
tau_min = e['tau_max']
#pi_2_duration = e['pi_2_duration']
pi_2_duration=25
noof_datapoints = e['noof_datapoints']
noof_reps = e['completed_repetitions']
e.close()
###########################################
######## SPIN RO #########################
###########################################
f = np.load(datapath+'\\'+spin_ro_file)
raw_counts = f['counts']
SSRO_counts = f['SSRO_counts']
repetitions = f['sweep_axis']
t = f['time']
tot_size = len(repetitions)
reps_per_point = tot_size/float(noof_datapoints)
idx = 0
counts_during_readout = zeros(noof_datapoints)
tau = linspace(tau_min,tau_max,noof_datapoints)
counts_during_readout = sum(raw_counts, axis = 1)
SSRO_readout = sum(SSRO_counts, axis = 1)/float(noof_reps)
#########################################
############ FITTING ####################
#########################################
print fit_data
if fit_data:
FFT = fft.fft(counts_during_readout)
N = int(noof_datapoints)
timestep = (mw_max_len-mw_min_len)/float(noof_datapoints-1)
freq = fft.fftfreq(N,d = timestep)
#Remove offset:
FFT[freq == 0] = 0
figure1 = plt.figure(1)
plt.bar(freq*1E3,abs(FFT), width = 0.4*1E3*(freq[1]-freq[0]), align = 'center')
plt.xlabel('Frequency (MHz)')
plt.ylabel('Amplitude')
plt.title('FFT (offset removed)')
if save:
figure1.savefig(datapath+'\\fft_signal_rabi.png')
offset_guess = counts_during_readout.min()+(counts_during_readout.max()+\
counts_during_readout.min())/2.0
tau_guess = 1000
#modulations:
mod_freq_guess = freq[find_nearest(abs(FFT),abs(FFT).max())]
mod_amp_guess = (counts_during_readout.max()+counts_during_readout.min())/2.0
mod_phase_guess = 0
print 'modulation frequency guess = ',freq_guess
print 'modulation amplitude guess = ',mod_amp_guess
figure2 = plt.figure(2)
if fit_data:
tau_guess = 200
fit.fit1d(tau, counts_during_readout,
ramsey.fit_ramsey_gaussian_decay,
tau_guess, offset_guess,
(mod_freq_guess,mod_amp_guess,mod_phase_guess),
do_plot = True, do_print = True, newfig = False)
print SSRO_readout
plt.plot(tau,SSRO_readout, 'sk')
plt.xlabel('\Delta t$ (ns)')
plt.ylabel('Integrated counts')
plt.title('Ramsey, driving $f$ ='+num2str(f_drive/1E6,1)+\
' MHz, power = '+num2str(mwpower,0)+' dBm,\n Detuning = '+\
num2str(detuning/1E6,0)+' MHz, $\pi/2$ length = '+\
num2str(pi_2_duration,0)+' ns')
plt.text(0.1*(tau_max+tau_min),max(counts_during_readout),datapath)
if save:
figure2.savefig(datapath+'\\histogram_integrated.png')
x = 6.0
y = 8.0
figure3 = plt.figure(figsize=(x,y))
plt.pcolor(raw_counts, cmap = 'hot', antialiased=False)
plt.xlabel('Readout time (us)')
plt.ylabel('MW repetition number')
plt.title('Total histogram, integrated over repetitions')
plt.colorbar()
if save:
figure3.savefig(datapath+'\\histogram_counts_2d.png')
f.close()
###########################################
######## SPIN PUMPING #####################
###########################################
v = np.load(datapath+'\\'+sp_file)
sp_counts = v['counts']
sp_time = v['time']
offset_guess = sp_counts[len(sp_counts)-1]
init_amp_guess = sp_counts[2]
decay_guess = 10
figure4 = plt.figure(4)
fit.fit1d(sp_time/1E3, sp_counts, common.fit_exp_decay_with_offset,
offset_guess, init_amp_guess, decay_guess,
do_plot = True, do_print = True, newfig = False,
plot_fitparams_xy = (0.5,0.5))
plt.plot(sp_time/1E3,sp_counts,'sg')
plt.xlabel('Time ($\mu$s)')
plt.ylabel('Integrated counts')
plt.title('Spin pumping')
v.close()
if save:
figure4.savefig(datapath+'\\spin_pumping.png')
#Save a dat file for use in e.g. Origin with the rabi oscillation.
curr_date = '#'+time.ctime()+'\n'
col_names = '#Col0: Interpulse delay (ns)\tCol1: Integrated counts\n'
col_vals = str()
for k in arange(noof_datapoints):
col_vals += num2str(tau[k],2)+'\t'+num2str(counts_during_readout[k],0)+'\n'
fo = open(datapath+'\\integrated_histogram.dat', "w")
for item in [curr_date, col_names, col_vals]:
fo.writelines(item)
fo.close()
return True
def plot_Pulse_cal_time(datapath, fit_data=True, save=True):
plt.close('all')
###########################################
######## MEASUREMENT SPECS ################
###########################################
files = os.listdir(datapath)
for k in files:
if 'statics_and_parameters.npz' in k:
stats_params_file = k
if 'Spin_RO.npz' in k:
spin_ro_file = k
if 'SP_histogram.npz' in k:
sp_file = k
e = np.load(datapath + '\\' + stats_params_file)
f_drive = e['mw_drive_freq']
mwpower = e['mw_power']
min_amp = e['min_pulse_amp']
max_amp = e['max_pulse_amp']
min_time = e['min_time']
max_time = e['max_time']
noof_datapoints = e['noof_datapoints']
noof_reps = e['completed_repetitions']
e.close()
###########################################
######## SPIN RO #########################
###########################################
f = np.load(datapath + '\\' + spin_ro_file)
raw_counts = f['counts']
repetitions = f['sweep_axis']
SSRO_counts = f['SSRO_counts']
t = f['time']
tot_size = len(repetitions)
reps_per_point = tot_size / float(noof_datapoints)
idx = 0
counts_during_readout = zeros(noof_datapoints)
delay_time = linspace(min_time, max_time, noof_datapoints)
amp = linspace(min_amp, max_amp, noof_datapoints)
counts_during_readout = sum(raw_counts, axis=1)
SSRO_readout = sum(SSRO_counts, axis=1) / float(noof_reps)
#########################################
############ FITTING ####################
#########################################
#FIXME to be implemented
figure2 = plt.figure(2)
plt.plot(delay_time, SSRO_readout, 'sk')
plt.xlabel('time between CORPSE pulses [ns]')
plt.ylabel('P ms=0')
plt.title('MW length sweep, driving $f$ ='+num2str(f_drive/1E6,1)+\
' MHz, power = '+num2str(mwpower,0)+' dBm')
#plt.text(0.1*(mw_max_len+mw_min_len),max(counts_during_readout),datapath)
if save:
figure2.savefig(datapath + '\\histogram_integrated.png')
x = 6.0
y = 8.0
figure3 = plt.figure(figsize=(x, y))
plt.pcolor(raw_counts, cmap='hot', antialiased=False)
plt.xlabel('Readout time (us)')
plt.ylabel('MW repetition number')
plt.title('Total histogram, integrated over repetitions')
plt.colorbar()
if save:
figure3.savefig(datapath + '\\histogram_counts_2d.png')
f.close()
###########################################
######## SPIN PUMPING #####################
###########################################
v = np.load(datapath + '\\' + sp_file)
sp_counts = v['counts']
sp_time = v['time']
offset_guess = sp_counts[len(sp_counts) - 1]
init_amp_guess = sp_counts[2]
decay_guess = 10
figure4 = plt.figure(4)
fit.fit1d(sp_time / 1E3,
sp_counts,
common.fit_exp_decay_with_offset,
offset_guess,
init_amp_guess,
decay_guess,
do_plot=True,
do_print=True,
newfig=False,
plot_fitparams_xy=(0.5, 0.5))
plt.plot(sp_time / 1E3, sp_counts, 'sg')
plt.xlabel('Time ($\mu$s)')
plt.ylabel('Integrated counts')
plt.title('Spin pumping')
v.close()
if save:
figure4.savefig(datapath + '\\spin_pumping.png')
#Save a dat file for use in e.g. Origin with the rabi oscillation.
curr_date = '#' + time.ctime() + '\n'
col_names = '#Col0: MW length (ns)\tCol1: Integrated counts\n'
col_vals = str()
for k in arange(noof_datapoints):
col_vals += num2str(amp[k], 2) + '\t' + num2str(
counts_during_readout[k], 0) + '\n'
fo = open(datapath + '\\integrated_histogram.dat', "w")
for item in [curr_date, col_names, col_vals]:
fo.writelines(item)
fo.close()
return True
def autoanalyze_single_ssro(rodata,
spdata,
crdata,
save_basepath,
binsize=0.131072,
reps=1e4,
ms=0,
closefigs=True,
stop=0,
firstbin=0):
"""
Analyzes a single SSRO measurement (can do both ms=0/+-1).
creates an overview plot over the measurement results, and a plot
of the measurement fidelity vs the measurement time.
saves the fidelities and errors vs ro time.
"""
if stop == 0:
stop = rodata['time'][-1] / 1e3
sp_stop = spdata['time'][-1] / 1e3
#print rodata['time'][-1]/1e3
print 'stop = ', stop
lastbin = int(stop / binsize)
print 'lastbin = ', lastbin
print 'binsize = ', binsize
t0 = time.time()
ts = timestamp()
rocounts = rodata['counts'] #.transpose()
spcounts = spdata['counts']
info = '' # will be populated with information that is written to a file
info = """Analyze SSRO measurement:
Measurement settings:
=====================
repetitions: %d
binsize [us]: %f
stop analysis [us]: %f
-> last bin: %d
Measurement results:
====================
""" % (reps, binsize, stop, lastbin)
annotation = 'repetitions: %d' % reps
cpsh_vs_ROtime = """# columns:
# - time
# - counts per shot
"""
cnts_vs_SPtime = """# columns:
# - time
# - counts
"""
fig1 = plt.figure(figsize=(16, 12))
### histogram for photon counts per shot (cpsh)
cpsh = sum(rocounts[:, firstbin:lastbin], axis=1) # sum over all columns
ax = plt.subplot(221)
plt.hist(cpsh, max(cpsh) + 1, align='mid', label='counts')
plt.xlabel('counts/shot')
plt.ylabel('occurrences')
plt.title('counts per shot, m_s = %d' % ms)
mean_cpsh = sum(cpsh) / float(reps)
annotation += "\nmean c.p.sh. = %.2f" % (mean_cpsh)
info += "\nmean c.p.sh. = %.2f" % (mean_cpsh)
pzero = len(where(cpsh == 0)[0]) / float(reps)
annotation += "\np(0 counts) = %.2f" % (pzero)
info += "\np(0 counts) = %.2f" % (pzero)
plt.figtext(0.45,
0.85,
annotation,
horizontalalignment='right',
verticalalignment='top')
### spin relaxation during readout
ro_time = rodata['time'][:lastbin] # create time axis [us]
ro_countrate = sum(rocounts[:, :lastbin], axis=0) / (binsize * 1e-6 * reps
) # [Hz]
sp_time = spdata['time']
sp_countrate = spcounts / (binsize * 1e-6 * reps) # [Hz]
savetxt(save_basepath + '_ro_countrate.dat',
array([ro_time, ro_countrate]).transpose())
savetxt(save_basepath + '_sp_countrate.dat',
array([sp_time, sp_countrate]).transpose())
#array([sp_time, sp_countrate]).transpose())
ax = plt.subplot(222)
# ax.set_yscale('log')
plt.plot(ro_time, ro_countrate, 'o')
plt.xlabel('RO time [ns]')
plt.ylabel('counts [Hz]')
plt.title('spin relaxation during readout')
### spin pumping data
# convert counts to Hz
sp = array([j / (binsize * 1e-6 * reps) for j in spdata['counts']])
ax = plt.subplot(223)
if False and len(spdata['counts']) > 2:
offset_guess = spdata['counts'][len(spdata['counts']) - 1]
init_amp_guess = spdata['counts'][2]
decay_guess = 10
fit_result = fit.fit1d(spdata['time'][2:len(spdata['counts']) - 1] /
1E3,
spdata['counts'][2:len(spdata['counts']) - 1],
common.fit_exp_decay_with_offset,
offset_guess,
init_amp_guess,
decay_guess,
do_plot=True,
do_print=True,
newfig=False,
ret=True,
plot_fitparams_xy=(0.5, 0.5))
# ax.set_yscale('log')
# NOTE: spin pumping starts at 1 us, that is the first datapoint
# that is retrieved from the adwin. Fit might not be displayed properly
# anymore now...
plt.plot(spdata['time'] + 1E3, sp, 'o')
plt.xlabel('spin pumping time [ns]')
plt.ylabel('counts [Hz]')
plt.title('spin relaxation during pumping')
### charge readout
ax = plt.subplot(224)
cr = crdata['counts']
plt.hist(cr, abs(max(cr) - min(cr) + 1), label='cr')
#### plt.hist(cr[:,2], abs(max(cr[:,2])-min(cr[:,2]))+1, label='cr2')
plt.xlabel('counts')
plt.ylabel('occurences')
plt.title('charge readout statistics')
# plt.legend()
### fidelity analysis
fid_dat = zeros((0, 3))
for i in range(1, lastbin):
t = i * binsize
# d: hist of counts, c: counts per shot
d = sum(rocounts[:, :i], axis=1)
c = sum(d) / float(reps)
cpsh_vs_ROtime += '%f\t%f\n' % (t, c)
# we get the fidelity from the probability to get zero counts in a
# shot
pzero = len(where(d == 0)[0]) / float(reps)
pzero_err = sqrt(pzero * (1 - pzero) / reps)
fid = 1 - pzero if ms == 0 else pzero # fidelity calc. depends on ms
fid_dat = vstack((fid_dat, array([[t, fid, pzero_err]])))
fig2 = plt.figure()
plt.errorbar(fid_dat[:, 0], fid_dat[:, 1], fmt='o', yerr=fid_dat[:, 2])
plt.xlabel('RO time [us]')
plt.ylabel('ms = %d RO fidelity' % ms)
plt.title('SSRO fidelity')
### saving
infofile = open(save_basepath + '_autoanalysis.txt', 'w')
infofile.write(info)
infofile.close()
# fidelities
savez(os.path.join(save_basepath + '_fid_vs_ROtime'),
time=fid_dat[:, 0],
fid=fid_dat[:, 1],
fid_error=fid_dat[:, 2])
savetxt(os.path.join(save_basepath + '_fid_vs_ROtime.dat'), fid_dat)
# counts per shot
f = open(save_basepath + '_cpsh_vs_ROtime.dat', 'w')
f.write(cpsh_vs_ROtime)
f.close()
fig1.savefig(save_basepath + '_autoanalysis.pdf', format='pdf')
fig2.savefig(save_basepath + '_fid_vs_ROtime.pdf', format='pdf')
totaltime = time.time() - t0
print 'autoanalysis took %.2f seconds' % totaltime
if closefigs:
fig1.clf()
fig2.clf()
plt.close('all')
def plot_esmw(datapath, fit_data=True, save=True):
plt.close('all')
suffix = 'esmw'
###########################################
######## MEASUREMENT SPECS ################
###########################################
files = os.listdir(datapath)
e = np.load(datapath + '\\' + suffix + '-1_statics_and_parameters.npz')
f_drive = e['mw_drive_freq']
mwpower = e['mw_power']
mw_min_freq = e['min_esmw_freq']
mw_max_freq = e['max_esmw_freq']
noof_datapoints = e['noof_datapoints']
e.close()
spin_ro_file = list()
sp_file = list()
for idx in arange(noof_datapoints):
for k in files:
if k == suffix + '-' + num2str(idx, 0) + '_Spin_RO.npz':
spin_ro_file.append(k)
if k == suffix + '-' + num2str(idx, 0) + '_SP_histogram.npz':
sp_file.append(k)
###########################################
######## SPIN RO #########################
###########################################
mw_freq = linspace(mw_min_freq, mw_max_freq, noof_datapoints)
fit_par = []
for idx in arange(noof_datapoints):
f = np.load(datapath + '\\' + spin_ro_file[idx])
raw_counts = f['counts']
repetitions = f['sweep_axis']
t = f['time']
tot_size = len(repetitions)
reps_per_point = tot_size / float(noof_datapoints)
counts_during_readout = sum(raw_counts, axis=0)
ro_time = arange(0, shape(raw_counts)[1])
figure1 = plt.figure(1)
offset_guess = counts_during_readout.min()
init_amp_guess = counts_during_readout.max()
decay_guess = 10
if fit_data:
fit_result, p = fit.fit1d(ro_time[arange(4,
len(ro_time) - 1)],
counts_during_readout[arange(
4,
len(ro_time) - 1)],
common.fit_exp_decay_with_offset,
offset_guess,
init_amp_guess,
decay_guess,
do_plot=True,
do_print=True,
newfig=False,
plot_fitparams_xy=(0.5, 0.5),
ret=True)
if fit_result != False:
fit_par.append(fit_result['params'][2])
else:
fit_par.append(0)
plt.plot(ro_time, counts_during_readout, 'or')
plt.xlabel('Read-out duration ($\mu$s)')
plt.ylabel('Integrated counts')
plt.title('Read-out with MW, driving $f$ ='+num2str(f_drive/1E6,1)+\
' MHz, power = '+num2str(mwpower,0)+' dBm')
if save:
figure1.savefig(datapath + '\\histogram_integrated' +
num2str(idx, 0) + '.png')
plt.clf()
x = 6.0
y = 8.0
figure2 = plt.figure(figsize=(x, y))
plt.pcolor(raw_counts, cmap='hot', antialiased=False)
plt.xlabel('Readout time (us)')
plt.ylabel('MW repetition number')
plt.title('Total histogram, integrated over repetitions')
plt.colorbar()
if save:
figure2.savefig(datapath + '\\histogram_counts_2d' +
num2str(idx, 0) + '.png')
plt.clf()
f.close()
###########################################
######## SPIN PUMPING #####################
###########################################
v = np.load(datapath + '\\' + sp_file[idx])
sp_counts = v['counts']
sp_time = v['time']
offset_guess = sp_counts[len(sp_counts) - 1]
init_amp_guess = sp_counts[2]
decay_guess = 10
figure3 = plt.figure(3)
if fit_data:
fit.fit1d(sp_time / 1E3,
sp_counts,
common.fit_exp_decay_with_offset,
offset_guess,
init_amp_guess,
decay_guess,
do_plot=True,
do_print=True,
newfig=False,
plot_fitparams_xy=(0.5, 0.5))
plt.plot(sp_time / 1E3, sp_counts, 'sg')
plt.xlabel('Time ($\mu$s)')
plt.ylabel('Integrated counts')
plt.title('Spin pumping')
v.close()
if save:
figure3.savefig(datapath + '\\spin_pumping' + num2str(idx, 0) +
'.png')
plt.clf()
if save:
#Save a dat file for use in e.g. Origin with the rabi oscillation.
curr_date = '#' + time.ctime() + '\n'
col_names = '#Col0: MW Freq (ns)\tCol1: Integrated counts\n'
col_vals = str()
for k in arange(len(mw_freq)):
col_vals += num2str(mw_freq[k], 4) + '\t' + num2str(
counts_during_readout[k], 0) + '\n'
fo = open(datapath + '\\integrated_histogram.dat', "w")
for item in [curr_date, col_names, col_vals]:
fo.writelines(item)
fo.close()
if fit_data:
plt.close('all')
print len(mw_freq)
print len(fit_par)
figure4 = plt.figure(4)
plt.plot(mw_freq / 1E6, fit_par, '-r')
plt.xlabel('MW frequency (MHz)')
plt.ylabel('Decay constant')
if save:
figure4.savefig(datapath + '\\decay_constant_vs_mw_freq.png')
plt.clf()
return fit_par
def plot_SE(datapath,
fid=(0.82, 0.9),
fiderr=(0.01, 0.01),
fit_data=True,
exp_guess=2.8,
save=True):
plt.close('all')
###########################################
######## MEASUREMENT SPECS ################
###########################################
files = os.listdir(datapath)
for k in files:
if 'statics_and_parameters.npz' in k:
stats_params_file = k
if 'Spin_RO.npz' in k:
spin_ro_file = k
if 'SP_histogram.npz' in k:
sp_file = k
e = np.load(datapath + '\\' + stats_params_file)
f_drive = e['mw_drive_freq']
mwpower = e['mw_power']
tau_max = e['tau_max']
tau_min = e['tau_min']
#frabi = e['frabi']
frabi = 11.
noof_datapoints = e['noof_datapoints']
noof_reps = e['completed_repetitions']
e.close()
###########################################
######## SPIN RO #########################
###########################################
f = np.load(datapath + '\\' + spin_ro_file)
raw_counts = f['counts']
SSRO_counts = f['SSRO_counts']
repetitions = f['sweep_axis']
t = f['time']
tot_size = len(repetitions)
reps_per_point = tot_size / float(noof_datapoints)
idx = 0
counts_during_readout = zeros(noof_datapoints)
tau_free_evol = linspace(tau_min, tau_max, noof_datapoints) * 2e-3
counts_during_readout = sum(raw_counts, axis=1)
SSRO_readout = sum(SSRO_counts, axis=1) / float(noof_reps)
SSRO_readout_corr = zeros(len(SSRO_readout))
readout_error = zeros(len(SSRO_readout))
for i in arange(len(SSRO_readout)):
ms0_events = SSRO_readout[i] * noof_reps
ms1_events = noof_reps * (1 - SSRO_readout[i])
corr = SSRO_correct(array([ms1_events, ms0_events]),
F0=fid[0],
F1=fid[1],
F0err=fiderr[0],
F1err=fiderr[1])
SSRO_readout_corr[i] = corr[0][0]
readout_error[i] = corr[1][0]
#########################################
############ FITTING ####################
#########################################
#FIXME: write nice fitting routine for SE
figure2 = plt.figure(2)
plt.plot(tau_free_evol, counts_during_readout, 'sk')
plt.xlabel('Free evolution time [us]')
plt.ylabel('Integrated counts')
plt.title('Spin Echo, driving $f$ ='+num2str(f_drive/1E6,1)+\
' MHz, frabi = '+num2str(frabi,0)+' MHz')
plt.text(0.1 * (max(tau_free_evol) + min(tau_free_evol)),
max(counts_during_readout), datapath)
if save:
figure2.savefig(datapath + '\\histogram_integrated.png')
figure4 = plt.figure(4)
plt.plot(tau_free_evol, SSRO_readout, 'sk')
plt.xlabel('Free evolution time [us]')
plt.ylabel('Fraction of events >0 counts')
plt.title('Spin Echo SSRO cor, driving $f$ ='+num2str(f_drive/1E6,1)+\
' MHz, frabi = '+num2str(frabi,0)+' MHz')
plt.text(0.1 * (max(tau_free_evol) + min(tau_free_evol)),
max(SSRO_readout), datapath)
if save:
figure4.savefig(datapath + '\\SSRO_readout.png')
figure6 = plt.figure(6)
if fit_data:
tau_guess = 530
offset_guess = SSRO_readout_corr.min()
amp_guess = SSRO_readout_corr.max() - offset_guess
print tau_guess
print offset_guess
print amp_guess
print tau_guess
print exp_guess
print tau_free_evol
fitresult = fit.fit1d(tau_free_evol,
SSRO_readout_corr,
SE.fit_echo,
tau_guess,
amp_guess,
offset_guess,
exp_guess,
do_plot=True,
do_print=True,
newfig=False)
print fitresult
plt.errorbar(tau_free_evol,
SSRO_readout_corr,
fmt='sk',
yerr=readout_error)
plt.xlabel('Free evolution time [us]')
plt.ylabel('P ms=0')
plt.title('Spin Echo SSRO cor, driving $f$ ='+num2str(f_drive/1E6,1)+\
' MHz, frabi = '+num2str(frabi,0)+' MHz')
plt.text(0.1 * (max(tau_free_evol) + min(tau_free_evol)),
max(SSRO_readout_corr), datapath)
if save:
figure6.savefig(datapath + '\\SSRO_readout_corr.png')
x = 6.0
y = 8.0
figure3 = plt.figure(figsize=(x, y))
plt.pcolor(raw_counts, cmap='hot', antialiased=False)
plt.xlabel('Readout time (us)')
plt.ylabel('MW repetition number')
plt.title('Total histogram, integrated over repetitions')
plt.colorbar()
if save:
figure3.savefig(datapath + '\\histogram_counts_2d.png')
f.close()
###########################################
######## SPIN PUMPING #####################
###########################################
v = np.load(datapath + '\\' + sp_file)
sp_counts = v['counts']
sp_time = v['time']
offset_guess = sp_counts[len(sp_counts) - 1]
init_amp_guess = sp_counts[2]
decay_guess = 10
figure5 = plt.figure(5)
fit.fit1d(sp_time / 1E3,
sp_counts,
common.fit_exp_decay_with_offset,
offset_guess,
init_amp_guess,
decay_guess,
do_plot=True,
do_print=True,
newfig=False,
plot_fitparams_xy=(0.5, 0.5))
plt.plot(sp_time / 1E3, sp_counts, 'sg')
plt.xlabel('Time ($\mu$s)')
plt.ylabel('Integrated counts')
plt.title('Spin pumping')
v.close()
if save:
figure5.savefig(datapath + '\\spin_pumping.png')
#Save a dat file for use in e.g. Origin with the rabi oscillation.
curr_date = '#' + time.ctime() + '\n'
col_names = '#Col0: Interpulse delay (ns)\tCol1: Integrated counts\tCol2: SSRO corr\n'
col_vals = str()
for k in arange(noof_datapoints):
col_vals += num2str(tau_free_evol[k], 2) + '\t' + num2str(
counts_during_readout[k], 0) + '\t' + num2str(
SSRO_readout_corr[k], 2) + '\n'
fo = open(datapath + '\\integrated_histogram.dat', "w")
for item in [curr_date, col_names, col_vals]:
fo.writelines(item)
fo.close()
return True
def plot_rabi(datapath, fit_data=True, with_detuning=False, save=True):
plt.close('all')
###########################################
######## MEASUREMENT SPECS ################
###########################################
files = os.listdir(datapath)
for k in files:
if 'statics_and_parameters.npz' in k:
stats_params_file = k
if 'Spin_RO.npz' in k:
spin_ro_file = k
if 'SP_histogram.npz' in k:
sp_file = k
e = np.load(datapath + '\\' + stats_params_file)
f_drive = e['mw_drive_freq']
mwpower = e['mw_power']
mw_min_len = e['min_mw_length']
mw_max_len = e['max_mw_length']
noof_datapoints = e['noof_datapoints']
noof_reps = e['completed_repetitions']
e.close()
###########################################
######## SPIN RO #########################
###########################################
f = np.load(datapath + '\\' + spin_ro_file)
raw_counts = f['counts']
SSRO_counts = f['SSRO_counts']
repetitions = f['sweep_axis']
t = f['time']
tot_size = len(repetitions)
reps_per_point = tot_size / float(noof_datapoints)
idx = 0
counts_during_readout = zeros(noof_datapoints)
mw_len = linspace(mw_min_len, mw_max_len, noof_datapoints)
counts_during_readout = sum(raw_counts, axis=1)
SSRO_readout = sum(SSRO_counts, axis=1) / float(noof_reps)
#########################################
############ FITTING ####################
#########################################
if fit_data:
FFT = fft.fft(SSRO_readout)
N = int(noof_datapoints)
timestep = (mw_max_len - mw_min_len) / float(noof_datapoints - 1)
freq = fft.fftfreq(N, d=timestep)
#Remove offset:
FFT[freq == 0] = 0
figure1 = plt.figure(1)
plt.bar(freq * 1E3,
abs(FFT),
width=0.4 * 1E3 * (freq[1] - freq[0]),
align='center')
plt.xlabel('Frequency (MHz)')
plt.ylabel('Amplitude')
plt.title('FFT (offset removed)')
if save:
figure1.savefig(datapath + '\\fft_signal_rabi.png')
freq_guess = freq[find_nearest(abs(FFT), abs(FFT).max())]
amp_guess = (counts_during_readout.max() +
counts_during_readout.min()) / 2.0
offset_guess = counts_during_readout.min()+(counts_during_readout.max()+\
counts_during_readout.min())/2.0
phase_guess = 0
figure3 = plt.figure(3)
plt.clf()
ax1 = figure3.add_subplot(111)
if fit_data and with_detuning:
tau_guess = 200
fit.fit1d(mw_len,
counts_during_readout,
rabi.fit_rabi_multiple_detunings,
amp_guess,
offset_guess,
freq_guess,
tau_guess, (0, 0), (2.2E-3, 0), (2 * 2.2E-3, 0),
do_plot=True,
do_print=True,
newfig=False)
elif fit_data:
[fit_result, p] = fit.fit1d(mw_len,
counts_during_readout,
rabi.fit_rabi_simple,
freq_guess,
amp_guess,
offset_guess,
phase_guess,
do_plot=True,
do_print=True,
newfig=False,
ret=True)
#pi_pulse_len = 0.5*1/fit_result['params_dict']['f']
#pi_2_pulse_len = 0.5*pi_pulse_len
#print 'pi pulse length = ', pi_pulse_len
#print 'pi/2 pulse length = ',pi_2_pulse_len
#ax2 = figure2.add_subplot(111, sharex=ax1, frameon=False)
#ax2.plot(mw_len,counts_during_readout, 'sk')
plt.xlabel('MW length (ns)')
plt.ylabel('Integrated counts')
plt.title('MW length sweep, driving $f$ ='+num2str(f_drive/1E6,1)+\
' MHz, power = '+num2str(mwpower,0)+' dBm')
plt.text(0.1 * (mw_max_len + mw_min_len), max(counts_during_readout),
datapath)
if save:
figure3.savefig(datapath + '\\histogram_integrated.png')
figure2 = plt.figure(2)
plt.clf()
ax1 = figure2.add_subplot(111)
#plt.plot(mw_len,SSRO_readout, 'sk')
if fit_data and with_detuning:
tau_guess = 200
fit.fit1d(mw_len,
SSRO_readout,
rabi.fit_rabi_multiple_detunings,
amp_guess,
offset_guess,
freq_guess,
tau_guess, (0, 0), (2.2E-3, 0), (2 * 2.2E-3, 0),
do_plot=True,
do_print=True,
newfig=False)
elif fit_data:
[fit_result, p] = fit.fit1d(mw_len,
SSRO_readout,
rabi.fit_rabi_simple,
freq_guess,
amp_guess,
offset_guess,
phase_guess,
do_plot=True,
do_print=True,
newfig=False,
ret=True)
pi_pulse_len = 0.5 * 1 / fit_result['params_dict']['f']
pi_2_pulse_len = 0.5 * pi_pulse_len
print 'pi pulse length = ', pi_pulse_len
print 'pi/2 pulse length = ', pi_2_pulse_len
#ax2 = figure2.add_subplot(111, sharex=ax1, frameon=False)
#ax2.plot(mw_len,counts_during_readout, 'sk')
plt.ylim([0, 1])
plt.xlabel('MW length (ns)')
plt.ylabel('P($m_s=0$)')
plt.title('MW length sweep, driving $f$ ='+num2str(f_drive/1E6,1)+\
' MHz, power = '+num2str(mwpower,0)+' dBm')
plt.text(0.1 * (mw_max_len + mw_min_len), max(counts_during_readout),
datapath)
if save:
figure2.savefig(datapath + '\\histogram_integrated_SSRO.png')
x = 6.0
y = 8.0
figure4 = plt.figure(figsize=(x, y))
plt.pcolor(raw_counts, cmap='hot', antialiased=False)
plt.xlabel('Readout time (us)')
plt.ylabel('MW repetition number')
plt.title('Total histogram, integrated over repetitions')
plt.colorbar()
if save:
figure4.savefig(datapath + '\\histogram_counts_2d.png')
f.close()
###########################################
######## SPIN PUMPING #####################
###########################################
v = np.load(datapath + '\\' + sp_file)
sp_counts = v['counts']
sp_time = v['time']
offset_guess = sp_counts[len(sp_counts) - 1]
init_amp_guess = sp_counts[2]
decay_guess = 10
figure5 = plt.figure()
fit.fit1d(sp_time / 1E3,
sp_counts,
common.fit_exp_decay_with_offset,
offset_guess,
init_amp_guess,
decay_guess,
do_plot=True,
do_print=True,
newfig=False,
plot_fitparams_xy=(0.5, 0.5))
plt.plot(sp_time / 1E3, sp_counts, 'sg')
plt.xlabel('Time ($\mu$s)')
plt.ylabel('Integrated counts')
plt.title('Spin pumping')
v.close()
if save:
figure5.savefig(datapath + '\\spin_pumping.png')
#Save a dat file for use in e.g. Origin with the rabi oscillation.
curr_date = '#' + time.ctime() + '\n'
col_names = '#Col0: MW length (ns)\tCol1: Integrated counts\n'
col_vals = str()
for k in arange(noof_datapoints):
col_vals += num2str(mw_len[k], 2) + '\t' + num2str(
counts_during_readout[k], 0) + '\n'
fo = open(datapath + '\\integrated_histogram.dat', "w")
for item in [curr_date, col_names, col_vals]:
fo.writelines(item)
fo.close()
return True
def plot_ramsey(datapath, fit_data=True, save=True):
plt.close('all')
###########################################
######## MEASUREMENT SPECS ################
###########################################
files = os.listdir(datapath)
for k in files:
if 'statics_and_parameters.npz' in k:
stats_params_file = k
if 'Spin_RO.npz' in k:
spin_ro_file = k
if 'SP_histogram.npz' in k:
sp_file = k
e = np.load(datapath + '\\' + stats_params_file)
f_drive = e['mw_drive_freq']
detuning = e['detuning']
mwpower = e['mw_power']
tau_max = e['tau_min']
tau_min = e['tau_max']
#pi_2_duration = e['pi_2_duration']
pi_2_duration = 25
noof_datapoints = e['noof_datapoints']
noof_reps = e['completed_repetitions']
e.close()
###########################################
######## SPIN RO #########################
###########################################
f = np.load(datapath + '\\' + spin_ro_file)
raw_counts = f['counts']
SSRO_counts = f['SSRO_counts']
repetitions = f['sweep_axis']
t = f['time']
tot_size = len(repetitions)
reps_per_point = tot_size / float(noof_datapoints)
idx = 0
counts_during_readout = zeros(noof_datapoints)
tau = linspace(tau_min, tau_max, noof_datapoints)
counts_during_readout = sum(raw_counts, axis=1)
SSRO_readout = sum(SSRO_counts, axis=1) / float(noof_reps)
#########################################
############ FITTING ####################
#########################################
print fit_data
if fit_data:
FFT = fft.fft(counts_during_readout)
N = int(noof_datapoints)
timestep = (mw_max_len - mw_min_len) / float(noof_datapoints - 1)
freq = fft.fftfreq(N, d=timestep)
#Remove offset:
FFT[freq == 0] = 0
figure1 = plt.figure(1)
plt.bar(freq * 1E3,
abs(FFT),
width=0.4 * 1E3 * (freq[1] - freq[0]),
align='center')
plt.xlabel('Frequency (MHz)')
plt.ylabel('Amplitude')
plt.title('FFT (offset removed)')
if save:
figure1.savefig(datapath + '\\fft_signal_rabi.png')
offset_guess = counts_during_readout.min()+(counts_during_readout.max()+\
counts_during_readout.min())/2.0
tau_guess = 1000
#modulations:
mod_freq_guess = freq[find_nearest(abs(FFT), abs(FFT).max())]
mod_amp_guess = (counts_during_readout.max() +
counts_during_readout.min()) / 2.0
mod_phase_guess = 0
print 'modulation frequency guess = ', freq_guess
print 'modulation amplitude guess = ', mod_amp_guess
figure2 = plt.figure(2)
if fit_data:
tau_guess = 200
fit.fit1d(tau,
counts_during_readout,
ramsey.fit_ramsey_gaussian_decay,
tau_guess,
offset_guess,
(mod_freq_guess, mod_amp_guess, mod_phase_guess),
do_plot=True,
do_print=True,
newfig=False)
print SSRO_readout
plt.plot(tau, SSRO_readout, 'sk')
plt.xlabel('\Delta t$ (ns)')
plt.ylabel('Integrated counts')
plt.title('Ramsey, driving $f$ ='+num2str(f_drive/1E6,1)+\
' MHz, power = '+num2str(mwpower,0)+' dBm,\n Detuning = '+\
num2str(detuning/1E6,0)+' MHz, $\pi/2$ length = '+\
num2str(pi_2_duration,0)+' ns')
plt.text(0.1 * (tau_max + tau_min), max(counts_during_readout), datapath)
if save:
figure2.savefig(datapath + '\\histogram_integrated.png')
x = 6.0
y = 8.0
figure3 = plt.figure(figsize=(x, y))
plt.pcolor(raw_counts, cmap='hot', antialiased=False)
plt.xlabel('Readout time (us)')
plt.ylabel('MW repetition number')
plt.title('Total histogram, integrated over repetitions')
plt.colorbar()
if save:
figure3.savefig(datapath + '\\histogram_counts_2d.png')
f.close()
###########################################
######## SPIN PUMPING #####################
###########################################
v = np.load(datapath + '\\' + sp_file)
sp_counts = v['counts']
sp_time = v['time']
offset_guess = sp_counts[len(sp_counts) - 1]
init_amp_guess = sp_counts[2]
decay_guess = 10
figure4 = plt.figure(4)
fit.fit1d(sp_time / 1E3,
sp_counts,
common.fit_exp_decay_with_offset,
offset_guess,
init_amp_guess,
decay_guess,
do_plot=True,
do_print=True,
newfig=False,
plot_fitparams_xy=(0.5, 0.5))
plt.plot(sp_time / 1E3, sp_counts, 'sg')
plt.xlabel('Time ($\mu$s)')
plt.ylabel('Integrated counts')
plt.title('Spin pumping')
v.close()
if save:
figure4.savefig(datapath + '\\spin_pumping.png')
#Save a dat file for use in e.g. Origin with the rabi oscillation.
curr_date = '#' + time.ctime() + '\n'
col_names = '#Col0: Interpulse delay (ns)\tCol1: Integrated counts\n'
col_vals = str()
for k in arange(noof_datapoints):
col_vals += num2str(tau[k], 2) + '\t' + num2str(
counts_during_readout[k], 0) + '\n'
fo = open(datapath + '\\integrated_histogram.dat', "w")
for item in [curr_date, col_names, col_vals]:
fo.writelines(item)
fo.close()
return True
def plot_dark_esr(datapath, fit_data=True, save=True, f_dip=2.878E9):
plt.close('all')
###########################################
######## MEASUREMENT SPECS ################
###########################################
files = os.listdir(datapath)
for k in files:
if 'statics_and_parameters.npz' in k:
stats_params_file = k
if 'Spin_RO.npz' in k:
spin_ro_file = k
if 'SP_histogram.npz' in k:
sp_file = k
e = np.load(datapath + '\\' + stats_params_file)
f_center = e['mw_center_freq']
mwpower = e['mw_power']
mw_min_freq = e['min_mw_freq']
mw_max_freq = e['max_mw_freq']
noof_datapoints = e['noof_datapoints']
e.close()
###########################################
######## SPIN RO #########################
###########################################
f = np.load(datapath + '\\' + spin_ro_file)
raw_counts = f['counts']
repetitions = f['sweep_axis']
t = f['time']
tot_size = len(repetitions)
reps_per_point = tot_size / float(noof_datapoints)
idx = 0
counts_during_readout = zeros(noof_datapoints)
mw_freq = linspace(mw_min_freq, mw_max_freq, noof_datapoints)
counts_during_readout = sum(raw_counts, axis=1)
#########################################
############ FITTING ####################
#########################################
offset_guess = counts_during_readout.max()
dip_depth_guess = offset_guess - counts_during_readout.min()
print offset_guess
print dip_depth_guess
width_guess = 1E6
f_dip_guess = f_dip
noof_dips = 3
dip_separation = 2E6
figure2 = plt.figure(2)
plt.plot(mw_freq / 1E9, counts_during_readout, '-ok')
if fit_data:
fit_result, p = fit.fit1d(mw_freq / 1E9,
counts_during_readout,
esr.fit_ESR_gauss,
offset_guess,
dip_depth_guess,
width_guess / 1E9,
f_dip_guess / 1E9,
(noof_dips, dip_separation / 1E9),
do_plot=True,
do_print=True,
newfig=False,
ret=True,
plot_fitonly=True)
center_peak = fit_result['params_dict']['x0']
splitting = fit_result['params_dict']['s0']
print '-1: f = ', (center_peak - splitting), ' GHz'
print '0: f = ', center_peak, ' GHz'
print '1: f = ', (center_peak + splitting), ' GHz'
plt.xlabel('MW frequency (GHz)')
plt.ylabel('Integrated counts')
plt.title('MW frequency sweep, MW parking spot $f$ ='+num2str(f_center/1E6,1)+\
' MHz, power = '+num2str(mwpower,0)+' dBm')
if save:
figure2.savefig(datapath + '\\histogram_integrated.png')
x = 6.0
y = 8.0
figure3 = plt.figure(figsize=(x, y))
plt.pcolor(raw_counts, cmap='hot', antialiased=False)
plt.xlabel('Readout time (us)')
plt.ylabel('MW repetition number')
plt.title('Total histogram, integrated over repetitions')
plt.colorbar()
if save:
figure3.savefig(datapath + '\\histogram_counts_2d.png')
f.close()
###########################################
######## SPIN PUMPING #####################
###########################################
v = np.load(datapath + '\\' + sp_file)
sp_counts = v['counts']
sp_time = v['time']
offset_guess = sp_counts[len(sp_counts) - 1]
init_amp_guess = sp_counts[2]
decay_guess = 10
figure4 = plt.figure(4)
fit.fit1d(sp_time / 1E3,
sp_counts,
common.fit_exp_decay_with_offset,
offset_guess,
init_amp_guess,
decay_guess,
do_plot=True,
do_print=True,
newfig=False,
plot_fitparams_xy=(0.5, 0.5))
plt.plot(sp_time / 1E3, sp_counts, 'sg')
plt.xlabel('Time ($\mu$s)')
plt.ylabel('Integrated counts')
plt.title('Spin pumping')
v.close()
if save:
figure4.savefig(datapath + '\\spin_pumping.png')
#Save a dat file for use in e.g. Origin with the rabi oscillation.
curr_date = '#' + time.ctime() + '\n'
col_names = '#Col0: MW freq (GHz)\tCol1: Integrated counts\n'
col_vals = str()
for k in arange(noof_datapoints):
col_vals += num2str(mw_freq[k] / 1E9, 10) + '\t' + num2str(
counts_during_readout[k], 0) + '\n'
fo = open(datapath + '\\integrated_histogram.dat', "w")
for item in [curr_date, col_names, col_vals]:
fo.writelines(item)
fo.close()
return True
def pi_over_two_calibration(datapath, norm,guess,fit_data = True, save = True,close_fig=True,new_fig=True):
"""
Datapath should be a folder that contains the actual measurement results,
so for example: datapath = 'D:\data\yyyymmdd\hhmmss_spin_control_suffix'
Flag fit_data if data should be fit.
Flag save if data should be saved (in the data directory)
guess = [a,b] for fit of line a+b*x
nrom = [ms0,ms1]
"""
print 'Analyzing spin control data...'
# Create directories for saving figures and saving processed data:
if not os.path.exists(os.path.join(datapath,'figures')):
os.makedirs(os.path.join(datapath,'figures'))
if not os.path.exists(os.path.join(datapath,'processed_data')):
os.makedirs(os.path.join(datapath,'processed_data'))
###########################################
######## MEASUREMENT SPECS ################
###########################################
files = os.listdir(datapath)
for k in files:
if 'statics_and_parameters.npz' in k:
stats_params_file = k
if 'Spin_RO.npz' in k:
spin_ro_file = k
if 'SP_histogram.npz' in k:
sp_file = k
e = np.load(datapath+'\\'+stats_params_file)
f_drive = e['mw_drive_freq']
mwpower = e['mw_power']
mw_min_len = e['min_sweep_par']
mw_max_len = e['max_sweep_par']
name=e['sweep_par_name']
noof_datapoints = e['noof_datapoints']
e.close()
###########################################
######## SPIN RO #########################
###########################################
g = np.load(datapath+'\\'+spin_ro_file)
raw_counts = g['counts']
SSRO_raw = g['SSRO_counts']
repetitions = g['sweep_axis']
t = g['time']
tot_size = len(repetitions)
reps_per_point = tot_size/float(noof_datapoints)
idx = 0
counts_during_readout = np.zeros(noof_datapoints)
mw_len = np.linspace(mw_min_len,mw_max_len,noof_datapoints)
counts_during_readout = np.sum(raw_counts, axis = 1)
SSRO_unnorm = np.zeros(noof_datapoints)
SSRO_unnorm = np.sum(SSRO_raw, axis = 1)
## Renormalize
SSRO = (SSRO_unnorm-norm[1])/(norm[0]-norm[1])
#########################################
############ FITTING ####################
#########################################
if fit_data:
a_guess=guess[0]
b_guess=guess[1]
#print 'frequency guess = ',freq_guess
fit_result = fit.fit1d(mw_len, SSRO, common.fit_line,
a_guess, b_guess,
do_plot = False, ret = True)
offset = fit_result['params_dict']['a']
slope = fit_result['params_dict']['b']
x = np.linspace(mw_min_len, mw_max_len, 501)
fit_curve = offset + slope*x
pi_2_pulse_len = (0.5-offset)/slope
name= spin_ro_file[:len(spin_ro_file)-16]
if new_fig:
plot2 = qt.Plot2D(mw_len, SSRO, 'sk',
title=name, name='Pi_over_2 Cal',clear=True)
plot2.add(x,fit_curve, '-r',title='fit '+name)
else:
plot2 = qt.plots['Cal']
plot2.add(mw_len, SSRO, 'xk',title=name)
plot2.add(x,fit_curve, '-r',title='fit '+name)
plot2.set_xlabel(name)
plot2.set_ylabel('Integrated counts')
plot2.set_plottitle(str(name) + ' , driving f ='+num2str(f_drive/1E6,1)+\
' MHz, power = '+num2str(mwpower,0)+' dBm')
#plt.text(0.1*(mw_max_len+mw_min_len),max(SSRO),datapath)
if save:
plot2.save_png(os.path.join(datapath,'figures', 'histogram_integrated'))
g.close()
if close_fig:
plot2.quit()
print SSRO
if save:
#Save a dat file for use in e.g. Origin with the rabi oscillation.
curr_date = '#'+time.ctime()+'\n'
col_names = '#Col0: MW length (ns)\tCol1: Integrated counts\n'
col_vals = str()
for k in np.arange(noof_datapoints):
col_vals += num2str(mw_len[k],2)+'\t'+num2str(counts_during_readout[k],0)+'\n'
fo = open(os.path.join(datapath, 'processed_data', 'mw_pi_calibration_integrated_histogram.dat'), "w")
for item in [curr_date, col_names, col_vals]:
fo.writelines(item)
fo.close()
if save:
#Save a dat file for use in e.g. Origin with the rabi oscillation.
curr_date = '#'+time.ctime()+'\n'
col_names = '#Col0: MW length (ns)\tCol1: SSRO\n'
col_vals = str()
for k in np.arange(noof_datapoints):
col_vals += num2str(mw_len[k],2)+'\t'+str(SSRO_unnorm[k])+'\n'
fo = open(os.path.join(datapath, 'processed_data', 'mw_pi_calibration_SSRO_unnorm.dat'), "w")
for item in [curr_date, col_names, col_vals]:
fo.writelines(item)
fo.close()
if save:
#Save a dat file for use in e.g. Origin with the rabi oscillation.
curr_date = '#'+time.ctime()+'\n'
col_names = '#Col0: MW length (ns)\tCol1: SSRO\n'
col_vals = str()
for k in np.arange(noof_datapoints):
col_vals += num2str(mw_len[k],2)+'\t'+str(SSRO[k])+'\n'
fo = open(os.path.join(datapath, 'processed_data', 'mw_pi_calibration_SSRO_norm.dat'), "w")
for item in [curr_date, col_names, col_vals]:
fo.writelines(item)
fo.close()
pi_over_two_dict={"pi_over_two":pi_2_pulse_len,"slope":slope,"offset":offset}
return pi_over_two_dict
def autoanalyze_single_ssro(rodata, spdata, crdata, save_basepath,
binsize=0.131072, reps=1e4, ms=0, closefigs=True, stop=0, firstbin=0):
"""
Analyzes a single SSRO measurement (can do both ms=0/+-1).
creates an overview plot over the measurement results, and a plot
of the measurement fidelity vs the measurement time.
saves the fidelities and errors vs ro time.
"""
if stop == 0:
stop = rodata['time'][-1]/1e3
sp_stop = spdata['time'][-1]/1e3
#print rodata['time'][-1]/1e3
print 'stop = ',stop
lastbin = int(stop/binsize)
print 'lastbin = ',lastbin
print 'binsize = ',binsize
t0 = time.time()
ts = timestamp()
rocounts = rodata['counts'] #.transpose()
spcounts = spdata['counts']
info = '' # will be populated with information that is written to a file
info = """Analyze SSRO measurement:
Measurement settings:
=====================
repetitions: %d
binsize [us]: %f
stop analysis [us]: %f
-> last bin: %d
Measurement results:
====================
""" % (reps, binsize, stop, lastbin)
annotation = 'repetitions: %d' % reps
cpsh_vs_ROtime = """# columns:
# - time
# - counts per shot
"""
cnts_vs_SPtime = """# columns:
# - time
# - counts
"""
fig1 = plt.figure(figsize=(16,12))
### histogram for photon counts per shot (cpsh)
cpsh = sum(rocounts[:,firstbin:lastbin], axis=1) # sum over all columns
ax = plt.subplot(221)
plt.hist(cpsh, max(cpsh)+1, align='mid', label='counts')
plt.xlabel('counts/shot')
plt.ylabel('occurrences')
plt.title('counts per shot, m_s = %d' % ms)
mean_cpsh = sum(cpsh)/float(reps)
annotation += "\nmean c.p.sh. = %.2f" % (mean_cpsh)
info += "\nmean c.p.sh. = %.2f" % (mean_cpsh)
pzero = len(where(cpsh==0)[0])/float(reps)
annotation += "\np(0 counts) = %.2f" % (pzero)
info += "\np(0 counts) = %.2f" % (pzero)
plt.figtext(0.45, 0.85, annotation, horizontalalignment='right',
verticalalignment='top')
### spin relaxation during readout
ro_time = rodata['time'][:lastbin] # create time axis [us]
ro_countrate = sum(rocounts[:,:lastbin], axis=0) / (binsize*1e-6*reps) # [Hz]
sp_time = spdata['time']
sp_countrate = spcounts / (binsize*1e-6*reps) # [Hz]
savetxt(save_basepath + '_ro_countrate.dat',
array([ro_time, ro_countrate]).transpose())
savetxt(save_basepath + '_sp_countrate.dat',
array([sp_time,sp_countrate]).transpose())
#array([sp_time, sp_countrate]).transpose())
ax = plt.subplot(222)
# ax.set_yscale('log')
plt.plot(ro_time, ro_countrate, 'o')
plt.xlabel('RO time [ns]')
plt.ylabel('counts [Hz]')
plt.title('spin relaxation during readout')
### spin pumping data
# convert counts to Hz
sp = array([j/(binsize*1e-6*reps) for j in spdata['counts']])
ax = plt.subplot(223)
if False and len(spdata['counts'])>2:
offset_guess = spdata['counts'][len(spdata['counts'])-1]
init_amp_guess = spdata['counts'][2]
decay_guess = 10
fit_result=fit.fit1d(spdata['time'][2:len(spdata['counts'])-1]/1E3, spdata['counts'][2:len(spdata['counts'])-1],
common.fit_exp_decay_with_offset,
offset_guess, init_amp_guess, decay_guess,
do_plot = True, do_print = True, newfig = False, ret=True,
plot_fitparams_xy = (0.5,0.5))
# ax.set_yscale('log')
# NOTE: spin pumping starts at 1 us, that is the first datapoint
# that is retrieved from the adwin. Fit might not be displayed properly
# anymore now...
plt.plot(spdata['time']+1E3, sp, 'o')
plt.xlabel('spin pumping time [ns]')
plt.ylabel('counts [Hz]')
plt.title('spin relaxation during pumping')
### charge readout
ax = plt.subplot(224)
cr = crdata['counts']
plt.hist(cr, abs(max(cr)-min(cr)+1), label='cr')
#### plt.hist(cr[:,2], abs(max(cr[:,2])-min(cr[:,2]))+1, label='cr2')
plt.xlabel('counts')
plt.ylabel('occurences')
plt.title('charge readout statistics')
# plt.legend()
### fidelity analysis
fid_dat = zeros((0,3))
for i in range(1,lastbin):
t = i*binsize
# d: hist of counts, c: counts per shot
d = sum(rocounts[:,:i], axis=1)
c = sum(d)/float(reps)
cpsh_vs_ROtime += '%f\t%f\n' % (t, c)
# we get the fidelity from the probability to get zero counts in a
# shot
pzero = len(where(d==0)[0])/float(reps)
pzero_err = sqrt(pzero*(1-pzero)/reps)
fid = 1-pzero if ms == 0 else pzero # fidelity calc. depends on ms
fid_dat = vstack((fid_dat, array([[t, fid, pzero_err]])))
fig2 = plt.figure()
plt.errorbar(fid_dat[:,0], fid_dat[:,1], fmt='o', yerr=fid_dat[:,2])
plt.xlabel('RO time [us]')
plt.ylabel('ms = %d RO fidelity' % ms)
plt.title('SSRO fidelity')
### saving
infofile = open(save_basepath+'_autoanalysis.txt', 'w')
infofile.write(info)
infofile.close()
# fidelities
savez(os.path.join(save_basepath+'_fid_vs_ROtime'), time=fid_dat[:,0],
fid=fid_dat[:,1], fid_error=fid_dat[:,2])
savetxt(os.path.join(save_basepath+'_fid_vs_ROtime.dat'), fid_dat)
# counts per shot
f = open(save_basepath+'_cpsh_vs_ROtime.dat', 'w')
f.write(cpsh_vs_ROtime)
f.close()
fig1.savefig(save_basepath+'_autoanalysis.pdf', format='pdf')
fig2.savefig(save_basepath+'_fid_vs_ROtime.pdf', format='pdf')
totaltime = time.time() - t0
print 'autoanalysis took %.2f seconds' % totaltime
if closefigs:
fig1.clf(); fig2.clf()
plt.close('all')
def analyze_SP_RO(sp_file,
params,
folder='',
plot=True,
save=True,
do_print=False,
ret=False,
name='spin_pumping.png'):
'''
Function to plot and fit a single SP or RO curve.
sp_file string (part of) the filename that contains data of interest
folder string folder that contains the data
'''
if folder == '':
folder = os.getcwd()
v = load(folder + '\\' + sp_file)
Ex_RO_power = params['Ex_RO_amplitude']
A_RO_power = params['Ex_RO_amplitude']
Ex_SP_power = params['Ex_SP_amplitude']
A_SP_power = params['A_SP_amplitude']
if 'Spin_RO' in sp_file:
sp_counts = sum(v['counts'], axis=0)
title = 'RO Powers: Ex = ' + str(Ex_RO_power * 1E9) + 'nW, A = ' + str(
A_RO_power * 1E9) + 'nW'
else:
sp_counts = v['counts']
title = 'SP Powers: Ex = ' + str(Ex_SP_power * 1E9) + 'nW, A = ' + str(
A_SP_power * 1E9) + 'nW'
sp_time = v['time']
v.close()
offset_guess = sp_counts[len(sp_counts) - 1]
init_amp_guess = max(sp_counts)
firstpoint = int(find_nearest(sp_counts, init_amp_guess))
decay_guess = 10
if plot:
figure4 = plt.figure(4)
plt.clf()
fit_result = fit.fit1d(sp_time[firstpoint:len(sp_counts) - 1] / 1E3,
sp_counts[firstpoint:len(sp_counts) - 1],
common.fit_exp_decay_with_offset,
offset_guess,
init_amp_guess,
decay_guess,
do_plot=plot,
do_print=do_print,
newfig=False,
ret=True,
plot_fitparams_xy=(0.5, 0.5))
if plot:
plt.plot(sp_time / 1E3, sp_counts, 'sg')
plt.xlabel('Time ($\mu$s)')
plt.ylabel('Integrated counts')
plt.title(title)
plt.ylim(ymax=max(sp_counts) * 1.2)
plt.text(0.01 * (max(sp_time / 1E3) + min(sp_time / 1E3)),
1.15 * max(sp_counts),
folder + sp_file,
fontsize='x-small')
if save:
figure4.savefig(folder + '\\' + name + '.png')
if ret:
return fit_result
def rabi_calibration(datapath, ssro_dict={},fit_data = True, save = True,close_fig=False,new_fig=True):
"""
Fits results from a spin_control data using a FFT.
Datapath should be a folder that contains the actual measurement results,
so for example: datapath = 'D:\data\yyyymmdd\hhmmss_spin_control_suffix'
Flag fit_data if data should be fit.
Flag save if data should be saved (in the data directory)
"""
print 'Analyzing spin control data...'
# Create directories for saving figures and saving processed data:
if not os.path.exists(os.path.join(datapath,'figures')):
os.makedirs(os.path.join(datapath,'figures'))
if not os.path.exists(os.path.join(datapath,'processed_data')):
os.makedirs(os.path.join(datapath,'processed_data'))
###########################################
######## MEASUREMENT SPECS ################
###########################################
files = os.listdir(datapath)
for k in files:
if 'statics_and_parameters.npz' in k:
stats_params_file = k
if 'Spin_RO.npz' in k:
spin_ro_file = k
if 'SP_histogram.npz' in k:
sp_file = k
e = np.load(datapath+'\\'+stats_params_file)
f_drive = e['mw_drive_freq']
mwpower = e['mw_power']
mw_min_len = e['min_mw_length']
mw_max_len = e['max_mw_length']
name=['sweep_par_name']
noof_datapoints = e['noof_datapoints']
noof_reps = e['completed_repetitions']
#ro_duration=e['RO_duration']
ro_duration=26.
e.close()
###########################################
######## SPIN RO #########################
###########################################
g = np.load(datapath+'\\'+spin_ro_file)
raw_counts = g['counts']
SSRO_counts = g['SSRO_counts']
repetitions = g['sweep_axis']
t = g['time']
tot_size = len(repetitions)
reps_per_point = tot_size/float(noof_datapoints)
idx = 0
counts_during_readout = np.zeros(noof_datapoints)
mw_len = np.linspace(mw_min_len,mw_max_len,noof_datapoints)
counts_during_readout = np.sum(raw_counts, axis = 1)
SSRO_readout = sum(SSRO_counts, axis = 1)/float(noof_reps)
# Spin RO corrected for SSRO error
#
if ssro_dict:
f=ssro_dict
idx = find_nearest(f["times"],ro_duration)
F0 = f["fid0"][idx]
F1 = f["fid1"][idx]
F0err = f["fid0_err"][idx]
F1err = f["fid1_err"][idx]
SSRO_readout_corr = zeros(len(SSRO_readout))
readout_error = zeros(len(SSRO_readout))
for i in arange(len(SSRO_readout)):
ms0_events = SSRO_readout[i]*noof_reps
ms1_events = noof_reps*(1-SSRO_readout[i])
corr = spin_control.SSRO_correct(array([ms1_events,ms0_events]),
F0=F0,F1=F1,F0err=F0err,F1err=F1err)
SSRO_readout_corr[i]=corr[0][0]
readout_error[i] = corr[1][0]
counts_during_readout=SSRO_readout_corr
ylabel = 'P(ms=0)'
else:
readout_error=zeros(len(counts_during_readout))
ylabel = 'Integrated Counts'
#########################################
############ FITTING ####################
#########################################
if fit_data:
FFT = np.fft.fft(counts_during_readout)
N = int(noof_datapoints)
timestep = (mw_max_len-mw_min_len)/float(noof_datapoints-1)
freq = np.fft.fftfreq(N,d = timestep)
#Remove offset:
FFT[freq == 0] = 0
plot1 = plot.Plot2D(freq*1E3, abs(FFT), 'sb')
plot1.set_xlabel('Frequency (MHz)')
plot1.set_ylabel('Amplitude')
plot1.set_plottitle('FFT (offset removed)')
plot1.set_title('FFT')
if save:
plot1.save_png(os.path.join(datapath, 'figures', 'fft_signal_rabi.png'))
freq_guess = freq[find_nearest(abs(FFT),abs(FFT).max())]
amp_guess = (counts_during_readout.max()+counts_during_readout.min())/2.0
offset_guess = counts_during_readout.min()+(counts_during_readout.max()+\
counts_during_readout.min())/2.0
phase_guess = 0
#print 'frequency guess = ',freq_guess
fit_result = fit.fit1d(mw_len, counts_during_readout, rabi.fit_rabi_simple,
freq_guess, amp_guess, offset_guess, phase_guess,
do_plot = False, ret = True)
f = fit_result['params_dict']['f']
a = fit_result['params_dict']['a']
A = fit_result['params_dict']['A']
phi = fit_result['params_dict']['phi']
x = np.linspace(mw_min_len, mw_max_len, 501)
fit_curve = a + A*np.cos(2*np.pi*(f*x + phi/360))
pi_pulse_len = 0.5*1/f
pi_2_pulse_len = 0.5*pi_pulse_len
print f
name= spin_ro_file[:len(spin_ro_file)-16]
if new_fig:
plot2 = qt.plots['Cal']
plot2.clear()
plot2 = plot.plot(mw_len, counts_during_readout, 'k',yerr=readout_error,
title=name,name='Cal')
plot2.add(x,fit_curve, '-r',title='fit '+name)
else:
plot2 = qt.plots['Cal']
plot2.add(mw_len, counts_during_readout, 'xk',yerr=readout_error,
title=name)
plot2.add(x,fit_curve, '-r',title='fit '+name)
plot2.set_xlabel(name)
plot2.set_ylabel(ylabel)
plot2.set_plottitle(str(name) + ' , frabi ='+num2str(f*1E3,1)+\
' MHz, power = '+num2str(mwpower,0)+' dBm')
#plt.text(0.1*(mw_max_len+mw_min_len),max(counts_during_readout),datapath)
if save:
plot2.save_png(os.path.join(datapath,'figures', 'histogram_integrated'))
g.close()
plot1.quit()
if close_fig:
plot2.quit()
if save:
#Save a dat file for use in e.g. Origin with the rabi oscillation.
curr_date = '#'+time.ctime()+'\n'
col_names = '#Col0: MW length (ns)\tCol1: Integrated counts\n'
col_vals = str()
for k in np.arange(noof_datapoints):
col_vals += num2str(mw_len[k],2)+'\t'+num2str(counts_during_readout[k],0)+'\n'
fo = open(os.path.join(datapath, 'processed_data', 'mw_pi_calibration_integrated_histogram.dat'), "w")
for item in [curr_date, col_names, col_vals]:
fo.writelines(item)
fo.close()
if 'len' in name:
minimum = pi_pulse_len
else:
minimum=x[find_nearest(fit_curve,fit_curve.min())]
return minimum
def calibrate(self, steps): # calibration values in uW
x = arange(0, steps)
y = zeros(steps, dtype=float)
self.apply_voltage(0)
ins_pm.set_wavelength(self._wavelength * 1e9)
time.sleep(2)
bg = ins_pm.get_power()
print 'background power: %.4f uW' % (bg * 1e6)
time.sleep(2)
V_max = self.get_V_max()
for a in x:
self.apply_voltage(a * V_max / (steps - 1))
time.sleep(1)
y[a] = ins_pm.get_power() - bg
print 'measured power at %.2f V: %.4f uW' % \
(a/float(steps-1)*V_max, y[a]*1e6)
x = x / float(steps - 1) * V_max
a, xc, k = max(y), .5, 5.
fitres = fit.fit1d(x,
y,
common.fit_AOM_powerdependence,
a,
xc,
k,
do_print=True,
do_plot=False,
ret=True)
fd = zeros(len(x))
if type(fitres) != type(False):
p1 = fitres['params_dict']
self.set_cal_a(p1['a'])
self.set_cal_xc(p1['xc'])
self.set_cal_k(p1['k'])
fd = fitres['fitdata']
else:
print 'could not fit calibration curve!'
dat = qt.Data(name='aom_calibration_'+self._name+'_'+\
self._cur_controller)
dat.add_coordinate('Voltage [V]')
dat.add_value('Power [W]')
dat.add_value('fit')
dat.create_file()
plt = qt.Plot2D(dat,
'rO',
name='aom calibration',
coorddim=0,
valdim=1,
clear=True)
plt.add_data(dat, coorddim=0, valdim=2)
dat.add_data_point(x, y, fd)
dat.close_file()
self.save_cfg()
print(self._name + ' calibration finished')
from analysis import common, fit, rabi
data = load("Rabi-0_SpinReadout.npz")
j = 0
time = []
counts = []
for i in data["MW burst time"]:
time.append(i)
print j
counts.append(sum(data["counts"][j]))
j = j + 1
amp = (max(counts) - min(counts)) / 2.0
offset = (max(counts) + min(counts)) / 2.0
freq = 0.001
decay = 500.0
plt.plot(time, counts, "o")
fit_result = fit.fit1d(
np.array(time), np.array(counts), rabi.fit_rabi_damped_exp, freq, amp, offset, decay, do_plot=True, ret=True
)
plt.show()
plt.savefig("rabi_fitted.png")
def num2str(num, precision):
return "%0.*f" % (precision, num)
A = fit.Parameter(max(measured_power - BG) / 2)
B = fit.Parameter(max(measured_power - BG) / 2)
f = fit.Parameter(1 / 2.5)
phi = fit.Parameter(0)
def fit_cos(x):
return A() + B() * cos(2 * pi * f() * x + phi())
ret = fit.fit1d(
V_EOM.reshape(-1),
measured_power.reshape(-1) - BG,
None,
fitfunc=fit_cos,
p0=[A, B, f, phi],
do_plot=True,
do_print=True,
ret=True,
)
p = qt.plots["EOM Calibration curve"]
V = linspace(EOM_min_voltage, EOM_max_voltage, V_step_size / 10)
qt.plot(V, fit_cos(V), "r-", name="EOM Calibration curve")
plt.save_png(file_directory[0:65] + "calibration_EOM_curve.png")
print "Extinction = max/min = " + num2str(max(measured_power - BG) / min(measured_power - BG), 0)
print "Done"
def plot_dark_esr(datapath, fit_data = True, save = True, f_dip = 2.878E9):
plt.close('all')
###########################################
######## MEASUREMENT SPECS ################
###########################################
files = os.listdir(datapath)
for k in files:
if 'statics_and_parameters.npz' in k:
stats_params_file = k
if 'Spin_RO.npz' in k:
spin_ro_file = k
if 'SP_histogram.npz' in k:
sp_file = k
e = np.load(datapath+'\\'+stats_params_file)
f_center = e['mw_center_freq']
mwpower = e['mw_power']
mw_min_freq = e['min_mw_freq']
mw_max_freq = e['max_mw_freq']
noof_datapoints = e['noof_datapoints']
e.close()
###########################################
######## SPIN RO #########################
###########################################
f = np.load(datapath+'\\'+spin_ro_file)
raw_counts = f['counts']
repetitions = f['sweep_axis']
t = f['time']
tot_size = len(repetitions)
reps_per_point = tot_size/float(noof_datapoints)
idx = 0
counts_during_readout = zeros(noof_datapoints)
mw_freq = linspace(mw_min_freq,mw_max_freq,noof_datapoints)
counts_during_readout = sum(raw_counts, axis = 1)
#########################################
############ FITTING ####################
#########################################
offset_guess = counts_during_readout.max()
dip_depth_guess = offset_guess - counts_during_readout.min()
print offset_guess
print dip_depth_guess
width_guess = 1E6
f_dip_guess = f_dip
noof_dips = 3
dip_separation = 2E6
figure2 = plt.figure(2)
plt.plot(mw_freq/1E9,counts_during_readout, '-ok')
if fit_data:
fit_result, p = fit.fit1d(mw_freq/1E9, counts_during_readout,
esr.fit_ESR_gauss, offset_guess, dip_depth_guess, width_guess/1E9,
f_dip_guess/1E9, (noof_dips, dip_separation/1E9),
do_plot = True, do_print = True, newfig = False, ret = True,
plot_fitonly = True)
center_peak = fit_result['params_dict']['x0']
splitting = fit_result['params_dict']['s0']
print '-1: f = ', (center_peak - splitting), ' GHz'
print '0: f = ', center_peak, ' GHz'
print '1: f = ', (center_peak + splitting), ' GHz'
plt.xlabel('MW frequency (GHz)')
plt.ylabel('Integrated counts')
plt.title('MW frequency sweep, MW parking spot $f$ ='+num2str(f_center/1E6,1)+\
' MHz, power = '+num2str(mwpower,0)+' dBm')
if save:
figure2.savefig(datapath+'\\histogram_integrated.png')
x = 6.0
y = 8.0
figure3 = plt.figure(figsize=(x,y))
plt.pcolor(raw_counts, cmap = 'hot', antialiased=False)
plt.xlabel('Readout time (us)')
plt.ylabel('MW repetition number')
plt.title('Total histogram, integrated over repetitions')
plt.colorbar()
if save:
figure3.savefig(datapath+'\\histogram_counts_2d.png')
f.close()
###########################################
######## SPIN PUMPING #####################
###########################################
v = np.load(datapath+'\\'+sp_file)
sp_counts = v['counts']
sp_time = v['time']
offset_guess = sp_counts[len(sp_counts)-1]
init_amp_guess = sp_counts[2]
decay_guess = 10
figure4 = plt.figure(4)
fit.fit1d(sp_time/1E3, sp_counts, common.fit_exp_decay_with_offset,
offset_guess, init_amp_guess, decay_guess,
do_plot = True, do_print = True, newfig = False,
plot_fitparams_xy = (0.5,0.5))
plt.plot(sp_time/1E3,sp_counts,'sg')
plt.xlabel('Time ($\mu$s)')
plt.ylabel('Integrated counts')
plt.title('Spin pumping')
v.close()
if save:
figure4.savefig(datapath+'\\spin_pumping.png')
#Save a dat file for use in e.g. Origin with the rabi oscillation.
curr_date = '#'+time.ctime()+'\n'
col_names = '#Col0: MW freq (GHz)\tCol1: Integrated counts\n'
col_vals = str()
for k in arange(noof_datapoints):
col_vals += num2str(mw_freq[k]/1E9,10)+'\t'+num2str(counts_during_readout[k],0)+'\n'
fo = open(datapath+'\\integrated_histogram.dat', "w")
for item in [curr_date, col_names, col_vals]:
fo.writelines(item)
fo.close()
return True
time.sleep(1)
y_BG[a] = adwin.get_countrates()[counter-1]
print 'step %s, counts %s'%(a,y_BG[a])
if mw:
SMB100.set_status('off')
#path = 'D:\\measuring\\data' + '\\'+time.strftime('%Y%m%d') + '\\' + time.strftime('%H%M%S', time.localtime()) + '_saturation_'+name+'\\'
#if not os.path.isdir(path):
# os.makedirs(path)
x_axis = x/float(steps-1)*max_power*1e6
#p_init = [400000, 80]
#p_fit = fit.fit_SaturationFunction(x_axis,y_NV-y_BG,p_init)
A, sat = max(y_NV-y_BG), .5*max_power*1e6
fitres = fit.fit1d(x_axis,y_NV-y_BG, common.fit_saturation,
A, sat, do_print=True, do_plot=False, ret=True)
dat = qt.Data(name='Saturation_curve_'+name)
dat.create_file()
dat.add_coordinate('Power [uW]')
dat.add_value('Counts [Hz]')
plt = qt.Plot2D(dat, 'rO', name='Saturation curve', coorddim=0, valdim=1, clear=True)
fd = zeros(len(x_axis))
if type(fitres) != type(False):
p1 = fitres['params_dict']
fit_A = p1['A']
fit_sat = p1['xsat']
fd = fitres['fitdata']
print ('maximum count rate: %.1f cps, saturation power: %.1f microwatt'%(fit_A,fit_sat))
def plot_rabi(datapath, fit_data = True, with_detuning = False, save = True):
plt.close('all')
###########################################
######## MEASUREMENT SPECS ################
###########################################
files = os.listdir(datapath)
for k in files:
if 'statics_and_parameters.npz' in k:
stats_params_file = k
if 'Spin_RO.npz' in k:
spin_ro_file = k
if 'SP_histogram.npz' in k:
sp_file = k
e = np.load(datapath+'\\'+stats_params_file)
f_drive = e['mw_drive_freq']
mwpower = e['mw_power']
mw_min_len = e['min_mw_length']
mw_max_len = e['max_mw_length']
noof_datapoints = e['noof_datapoints']
noof_reps = e['completed_repetitions']
e.close()
###########################################
######## SPIN RO #########################
###########################################
f = np.load(datapath+'\\'+spin_ro_file)
raw_counts = f['counts']
SSRO_counts = f['SSRO_counts']
repetitions = f['sweep_axis']
t = f['time']
tot_size = len(repetitions)
reps_per_point = tot_size/float(noof_datapoints)
idx = 0
counts_during_readout = zeros(noof_datapoints)
mw_len = linspace(mw_min_len,mw_max_len,noof_datapoints)
counts_during_readout = sum(raw_counts, axis = 1)
SSRO_readout = sum(SSRO_counts, axis = 1)/float(noof_reps)
#########################################
############ FITTING ####################
#########################################
if fit_data:
FFT = fft.fft(SSRO_readout)
N = int(noof_datapoints)
timestep = (mw_max_len-mw_min_len)/float(noof_datapoints-1)
freq = fft.fftfreq(N,d = timestep)
#Remove offset:
FFT[freq == 0] = 0
figure1 = plt.figure(1)
plt.bar(freq*1E3,abs(FFT), width = 0.4*1E3*(freq[1]-freq[0]), align = 'center')
plt.xlabel('Frequency (MHz)')
plt.ylabel('Amplitude')
plt.title('FFT (offset removed)')
if save:
figure1.savefig(datapath+'\\fft_signal_rabi.png')
freq_guess = freq[find_nearest(abs(FFT),abs(FFT).max())]
amp_guess = (counts_during_readout.max()+counts_during_readout.min())/2.0
offset_guess = counts_during_readout.min()+(counts_during_readout.max()+\
counts_during_readout.min())/2.0
phase_guess = 0
figure3 = plt.figure(3)
plt.clf()
ax1 = figure3.add_subplot(111)
if fit_data and with_detuning:
tau_guess = 200
fit.fit1d(mw_len, counts_during_readout,
rabi.fit_rabi_multiple_detunings,
amp_guess, offset_guess, freq_guess, tau_guess,
(0,0),(2.2E-3,0),(2*2.2E-3,0),
do_plot = True, do_print = True, newfig = False)
elif fit_data:
[fit_result, p] = fit.fit1d(mw_len, counts_during_readout, rabi.fit_rabi_simple,
freq_guess, amp_guess, offset_guess, phase_guess,
do_plot = True, do_print = True, newfig = False, ret = True)
#pi_pulse_len = 0.5*1/fit_result['params_dict']['f']
#pi_2_pulse_len = 0.5*pi_pulse_len
#print 'pi pulse length = ', pi_pulse_len
#print 'pi/2 pulse length = ',pi_2_pulse_len
#ax2 = figure2.add_subplot(111, sharex=ax1, frameon=False)
#ax2.plot(mw_len,counts_during_readout, 'sk')
plt.xlabel('MW length (ns)')
plt.ylabel('Integrated counts')
plt.title('MW length sweep, driving $f$ ='+num2str(f_drive/1E6,1)+\
' MHz, power = '+num2str(mwpower,0)+' dBm')
plt.text(0.1*(mw_max_len+mw_min_len),max(counts_during_readout),datapath)
if save:
figure3.savefig(datapath+'\\histogram_integrated.png')
figure2 = plt.figure(2)
plt.clf()
ax1 = figure2.add_subplot(111)
#plt.plot(mw_len,SSRO_readout, 'sk')
if fit_data and with_detuning:
tau_guess = 200
fit.fit1d(mw_len, SSRO_readout,
rabi.fit_rabi_multiple_detunings,
amp_guess, offset_guess, freq_guess, tau_guess,
(0,0),(2.2E-3,0),(2*2.2E-3,0),
do_plot = True, do_print = True, newfig = False)
elif fit_data:
[fit_result, p] = fit.fit1d(mw_len, SSRO_readout, rabi.fit_rabi_simple,
freq_guess, amp_guess, offset_guess, phase_guess,
do_plot = True, do_print = True, newfig = False, ret = True)
pi_pulse_len = 0.5*1/fit_result['params_dict']['f']
pi_2_pulse_len = 0.5*pi_pulse_len
print 'pi pulse length = ', pi_pulse_len
print 'pi/2 pulse length = ',pi_2_pulse_len
#ax2 = figure2.add_subplot(111, sharex=ax1, frameon=False)
#ax2.plot(mw_len,counts_during_readout, 'sk')
plt.ylim([0,1])
plt.xlabel('MW length (ns)')
plt.ylabel('P($m_s=0$)')
plt.title('MW length sweep, driving $f$ ='+num2str(f_drive/1E6,1)+\
' MHz, power = '+num2str(mwpower,0)+' dBm')
plt.text(0.1*(mw_max_len+mw_min_len),max(counts_during_readout),datapath)
if save:
figure2.savefig(datapath+'\\histogram_integrated_SSRO.png')
x = 6.0
y = 8.0
figure4 = plt.figure(figsize=(x,y))
plt.pcolor(raw_counts, cmap = 'hot', antialiased=False)
plt.xlabel('Readout time (us)')
plt.ylabel('MW repetition number')
plt.title('Total histogram, integrated over repetitions')
plt.colorbar()
if save:
figure4.savefig(datapath+'\\histogram_counts_2d.png')
f.close()
###########################################
######## SPIN PUMPING #####################
###########################################
v = np.load(datapath+'\\'+sp_file)
sp_counts = v['counts']
sp_time = v['time']
offset_guess = sp_counts[len(sp_counts)-1]
init_amp_guess = sp_counts[2]
decay_guess = 10
figure5 = plt.figure()
fit.fit1d(sp_time/1E3, sp_counts, common.fit_exp_decay_with_offset,
offset_guess, init_amp_guess, decay_guess,
do_plot = True, do_print = True, newfig = False,
plot_fitparams_xy = (0.5,0.5))
plt.plot(sp_time/1E3,sp_counts,'sg')
plt.xlabel('Time ($\mu$s)')
plt.ylabel('Integrated counts')
plt.title('Spin pumping')
v.close()
if save:
figure5.savefig(datapath+'\\spin_pumping.png')
#Save a dat file for use in e.g. Origin with the rabi oscillation.
curr_date = '#'+time.ctime()+'\n'
col_names = '#Col0: MW length (ns)\tCol1: Integrated counts\n'
col_vals = str()
for k in arange(noof_datapoints):
col_vals += num2str(mw_len[k],2)+'\t'+num2str(counts_during_readout[k],0)+'\n'
fo = open(datapath+'\\integrated_histogram.dat', "w")
for item in [curr_date, col_names, col_vals]:
fo.writelines(item)
fo.close()
return True
def dark_esr_calibration(datapath, fit_data = True, save = True, f_dip = 2.858E9):
###########################################
######## MEASUREMENT SPECS ################
###########################################
files = os.listdir(datapath)
for k in files:
if 'statics_and_parameters.npz' in k:
stats_params_file = k
if 'Spin_RO.npz' in k:
spin_ro_file = k
if 'SP_histogram.npz' in k:
sp_file = k
e = np.load(datapath+'\\'+stats_params_file)
f_center = e['mw_center_freq']
mwpower = e['mw_power']
mw_min_freq = e['min_mw_freq']
mw_max_freq = e['max_mw_freq']
noof_datapoints = e['noof_datapoints']
e.close()
###########################################
######## SPIN RO #########################
###########################################
g = np.load(datapath+'\\'+spin_ro_file)
raw_counts = g['counts']
repetitions = g['sweep_axis']
t = g['time']
tot_size = len(repetitions)
reps_per_point = tot_size/float(noof_datapoints)
idx = 0
counts_during_readout = np.zeros(noof_datapoints)
mw_freq = np.linspace(mw_min_freq,mw_max_freq,noof_datapoints)
counts_during_readout = np.sum(raw_counts, axis = 1)
#########################################
############ FITTING ####################
#########################################
offset_guess = counts_during_readout.max()
dip_depth_guess = offset_guess - counts_during_readout.min()
print 'offset guess = ',offset_guess
print 'dip depth guess = ',dip_depth_guess
width_guess = 1E6
f_dip_guess = f_dip
noof_dips = 3
dip_separation = 2E6
if fit_data:
fit_result = fit.fit1d(mw_freq, counts_during_readout, esr.fit_ESR_gauss,
offset_guess, dip_depth_guess, width_guess,
f_dip_guess, (noof_dips, dip_separation),
do_plot = False, do_print = False,
newfig = False, ret = True)
x0 = fit_result['params_dict']['x0']
a = fit_result['params_dict']['a']
A = fit_result['params_dict']['A']
sigma = fit_result['params_dict']['sigma']
s0 = fit_result['params_dict']['s0']
x = np.linspace(mw_min_freq, mw_max_freq, 501)
fit_curve = np.zeros(len(x))
x0 = [x0-s0, x0, x0+s0]
for k in range(noof_dips):
fit_curve += np.exp(-((x-x0[k])/sigma)**2)
fit_curve = a*np.ones(len(x)) - A*fit_curve
plot1 = qt.Plot2D(mw_freq/1E9, counts_during_readout, '-ok', x/1E9, fit_curve, '-r',name='desr',clear=True)
plot1.set_xlabel('MW frequency (GHz)')
plot1.set_ylabel('Integrated counts')
plot1.set_plottitle('MW frequency sweep, laser parking spot f ='+num2str(f_center/1E6,1)+\
' MHz, power = '+num2str(mwpower,0)+' dBm')
if save:
plot1.save_png(datapath+'\\histogram_integrated.png')
g.close()
#plot1.quit()
if save:
#Save a dat file for use in e.g. Origin with the dark esr data.
curr_date = '#'+time.ctime()+'\n'
col_names = '#Col0: MW freq (GHz)\tCol1: Integrated counts\n'
col_vals = str()
for k in range(noof_datapoints):
col_vals += num2str(mw_freq[k]/1E9,10)+'\t'+num2str(counts_during_readout[k],0)+'\n'
fo = open(datapath+'\\mw_f_calibration_integrated_histogram.dat', "w")
for item in [curr_date, col_names, col_vals]:
fo.writelines(item)
fo.close()
return x0
def plot_esmw(datapath, fit_data = True, save = True):
plt.close('all')
suffix = 'esmw'
###########################################
######## MEASUREMENT SPECS ################
###########################################
files = os.listdir(datapath)
e = np.load(datapath+'\\'+suffix+'-1_statics_and_parameters.npz')
f_drive = e['mw_drive_freq']
mwpower = e['mw_power']
mw_min_freq = e['min_esmw_freq']
mw_max_freq = e['max_esmw_freq']
noof_datapoints = e['noof_datapoints']
e.close()
spin_ro_file = list()
sp_file = list()
for idx in arange(noof_datapoints):
for k in files:
if k == suffix+'-'+num2str(idx,0)+'_Spin_RO.npz':
spin_ro_file.append(k)
if k == suffix+'-'+num2str(idx,0)+'_SP_histogram.npz':
sp_file.append(k)
###########################################
######## SPIN RO #########################
###########################################
mw_freq = linspace(mw_min_freq,mw_max_freq,noof_datapoints)
fit_par=[]
for idx in arange(noof_datapoints):
f = np.load(datapath+'\\'+spin_ro_file[idx])
raw_counts = f['counts']
repetitions = f['sweep_axis']
t = f['time']
tot_size = len(repetitions)
reps_per_point = tot_size/float(noof_datapoints)
counts_during_readout = sum(raw_counts, axis = 0)
ro_time = arange(0,shape(raw_counts)[1])
figure1 = plt.figure(1)
offset_guess = counts_during_readout.min()
init_amp_guess = counts_during_readout.max()
decay_guess = 10
if fit_data:
fit_result,p=fit.fit1d(ro_time[arange(4,len(ro_time)-1)],
counts_during_readout[arange(4,len(ro_time)-1)],
common.fit_exp_decay_with_offset,
offset_guess, init_amp_guess, decay_guess,
do_plot = True, do_print = True, newfig = False,
plot_fitparams_xy = (0.5,0.5),
ret=True)
if fit_result != False:
fit_par.append(fit_result['params'][2])
else:
fit_par.append(0)
plt.plot(ro_time, counts_during_readout, 'or')
plt.xlabel('Read-out duration ($\mu$s)')
plt.ylabel('Integrated counts')
plt.title('Read-out with MW, driving $f$ ='+num2str(f_drive/1E6,1)+\
' MHz, power = '+num2str(mwpower,0)+' dBm')
if save:
figure1.savefig(datapath+'\\histogram_integrated'+num2str(idx,0)+'.png')
plt.clf()
x = 6.0
y = 8.0
figure2 = plt.figure(figsize=(x,y))
plt.pcolor(raw_counts, cmap = 'hot', antialiased=False)
plt.xlabel('Readout time (us)')
plt.ylabel('MW repetition number')
plt.title('Total histogram, integrated over repetitions')
plt.colorbar()
if save:
figure2.savefig(datapath+'\\histogram_counts_2d'+num2str(idx,0)+'.png')
plt.clf()
f.close()
###########################################
######## SPIN PUMPING #####################
###########################################
v = np.load(datapath+'\\'+sp_file[idx])
sp_counts = v['counts']
sp_time = v['time']
offset_guess = sp_counts[len(sp_counts)-1]
init_amp_guess = sp_counts[2]
decay_guess = 10
figure3 = plt.figure(3)
if fit_data:
fit.fit1d(sp_time/1E3, sp_counts, common.fit_exp_decay_with_offset,
offset_guess, init_amp_guess, decay_guess,
do_plot = True, do_print = True, newfig = False,
plot_fitparams_xy = (0.5,0.5))
plt.plot(sp_time/1E3,sp_counts,'sg')
plt.xlabel('Time ($\mu$s)')
plt.ylabel('Integrated counts')
plt.title('Spin pumping')
v.close()
if save:
figure3.savefig(datapath+'\\spin_pumping'+num2str(idx,0)+'.png')
plt.clf()
if save:
#Save a dat file for use in e.g. Origin with the rabi oscillation.
curr_date = '#'+time.ctime()+'\n'
col_names = '#Col0: MW Freq (ns)\tCol1: Integrated counts\n'
col_vals = str()
for k in arange(len(mw_freq)):
col_vals += num2str(mw_freq[k],4)+'\t'+num2str(counts_during_readout[k],0)+'\n'
fo = open(datapath+'\\integrated_histogram.dat', "w")
for item in [curr_date, col_names, col_vals]:
fo.writelines(item)
fo.close()
if fit_data:
plt.close('all')
print len(mw_freq)
print len(fit_par)
figure4 = plt.figure(4)
plt.plot(mw_freq/1E6,fit_par, '-r')
plt.xlabel('MW frequency (MHz)')
plt.ylabel('Decay constant')
if save:
figure4.savefig(datapath+'\\decay_constant_vs_mw_freq.png')
plt.clf()
return fit_par
def esr_calibration(datapath, fit_data = True, save = True, f_dip = 2.828E9):
###########################################
######## MEASUREMENT SPECS ################
###########################################
files = os.listdir(datapath)
for k in files:
if '.npz' in k:
data_file = k
data = np.load(datapath+'\\'+data_file)
mw_freq = data['freq']
counts = data['counts']
data.close()
f_dip_guess=f_dip
offset_guess = counts.max()
dip_depth_guess = offset_guess - counts.min()
width_guess = 5e-3
#########################################
############ FITTING ####################
#########################################
if fit_data:
fit_result=fit.fit1d(mw_freq/1E9, counts, common.fit_gauss,
offset_guess, dip_depth_guess, f_dip_guess/1E9,width_guess,
do_plot = False, do_print = False, newfig = False,ret=True)
x0 = fit_result['params_dict']['x0']
a = fit_result['params_dict']['a']
A = fit_result['params_dict']['A']
sigma = fit_result['params_dict']['sigma']
#s0 = fit_result[0]['params_dict']['s0']
x = np.linspace(mw_freq.min(), mw_freq.max(), 501)
fit_curve = np.zeros(len(x))
fit_curve = np.exp(-(((x/1E9)-x0)/sigma)**2)
fit_curve = a*np.ones(len(x)) + A*fit_curve
plot1 = qt.Plot2D(mw_freq/1E9, counts, '-ok', x/1E9, fit_curve, '-r',name='ESR',clear=True)
plot1.set_xlabel('MW frequency (GHz)')
plot1.set_ylabel('Integrated counts')
plot1.set_plottitle('MW frequency sweep')
if save:
plot1.save_png(datapath+'\\histogram_integrated.png')
data.close()
plot1.clear()
plot1.quit()
if save:
#Save a dat file for use in e.g. Origin with the dark esr data.
curr_date = '#'+time.ctime()+'\n'
col_names = '#Col0: MW freq (GHz)\tCol1: Integrated counts\n'
col_vals = str()
for k in range(len(counts)):
col_vals += num2str(mw_freq[k]/1E9,10)+'\t'+num2str(counts[k],0)+'\n'
fo = open(datapath+'\\mw_f_calibration_integrated_histogram.dat', "w")
for item in [curr_date, col_names, col_vals]:
fo.writelines(item)
fo.close()
return x0*1E9
def plot_Pulse_cal(datapath, fit_data = True, save = True):
plt.close('all')
###########################################
######## MEASUREMENT SPECS ################
###########################################
files = os.listdir(datapath)
for k in files:
if 'statics_and_parameters.npz' in k:
stats_params_file = k
if 'Spin_RO.npz' in k:
spin_ro_file = k
if 'SP_histogram.npz' in k:
sp_file = k
e = np.load(datapath+'\\'+stats_params_file)
f_drive = e['mw_drive_freq']
mwpower = e['mw_power']
min_pulse_nr = e['min_pulse_nr']
max_pulse_nr = e['max_pulse_nr']
noof_datapoints = e['noof_datapoints']
noof_reps = e['completed_repetitions']
e.close()
###########################################
######## SPIN RO #########################
###########################################
f = np.load(datapath+'\\'+spin_ro_file)
raw_counts = f['counts']
repetitions = f['sweep_axis']
SSRO_counts = f['SSRO_counts']
t = f['time']
tot_size = len(repetitions)
reps_per_point = tot_size/float(noof_datapoints)
idx = 0
counts_during_readout = zeros(noof_datapoints)
pulse_nr = linspace(min_pulse_nr,max_pulse_nr,noof_datapoints)
counts_during_readout = sum(raw_counts, axis = 1)
SSRO_readout = sum(SSRO_counts, axis = 1)/float(noof_reps)
#########################################
############ FITTING ####################
#########################################
#FIXME to be implemented
figure2=plt.figure(2)
figure2.clf()
plt.plot(pulse_nr,SSRO_readout, 'sk')
plt.xlabel('Pulse nr')
plt.ylabel('P ms=0')
plt.title('MW length sweep, driving $f$ ='+num2str(f_drive/1E6,1)+\
' MHz, power = '+num2str(mwpower,0)+' dBm')
#plt.text(0.1*(mw_max_len+mw_min_len),max(counts_during_readout),datapath)
if save:
figure2.savefig(datapath+'\\histogram_integrated.png')
x = 6.0
y = 8.0
figure3 = plt.figure(figsize=(x,y))
plt.pcolor(raw_counts, cmap = 'hot', antialiased=False)
plt.xlabel('Readout time (us)')
plt.ylabel('MW repetition number')
plt.title('Total histogram, integrated over repetitions')
plt.colorbar()
if save:
figure3.savefig(datapath+'\\histogram_counts_2d.png')
f.close()
###########################################
######## SPIN PUMPING #####################
###########################################
v = np.load(datapath+'\\'+sp_file)
sp_counts = v['counts']
sp_time = v['time']
offset_guess = sp_counts[len(sp_counts)-1]
init_amp_guess = sp_counts[2]
decay_guess = 10
figure4 = plt.figure(4)
fit.fit1d(sp_time/1E3, sp_counts, common.fit_exp_decay_with_offset,
offset_guess, init_amp_guess, decay_guess,
do_plot = True, do_print = True, newfig = False,
plot_fitparams_xy = (0.5,0.5))
plt.plot(sp_time/1E3,sp_counts,'sg')
plt.xlabel('Time ($\mu$s)')
plt.ylabel('Integrated counts')
plt.title('Spin pumping')
v.close()
if save:
figure4.savefig(datapath+'\\spin_pumping.png')
#Save a dat file for use in e.g. Origin with the rabi oscillation.
curr_date = '#'+time.ctime()+'\n'
col_names = '#Col0: MW length (ns)\tCol1: Integrated counts\n'
col_vals = str()
for k in arange(noof_datapoints):
col_vals += num2str(pulse_nr[k],2)+'\t'+num2str(counts_during_readout[k],0)+'\n'
fo = open(datapath+'\\integrated_histogram.dat', "w")
for item in [curr_date, col_names, col_vals]:
fo.writelines(item)
fo.close()
return True
def num2str(num, precision):
return "%0.*f" % (precision, num)
A = fit.Parameter(max(measured_power - BG) / 2)
B = fit.Parameter(max(measured_power - BG) / 2)
f = fit.Parameter(1 / 2.5)
phi = fit.Parameter(0)
def fit_cos(x):
return A() + B() * cos(2 * pi * f() * x + phi())
ret = fit.fit1d(V_EOM.reshape(-1),
measured_power.reshape(-1) - BG,
None,
fitfunc=fit_cos,
p0=[A, B, f, phi],
do_plot=True,
do_print=True,
ret=True)
p = qt.plots['EOM Calibration curve']
V = linspace(EOM_min_voltage, EOM_max_voltage, V_step_size / 10)
qt.plot(V, fit_cos(V), 'r-', name='EOM Calibration curve')
plt.save_png(file_directory[0:65] + 'calibration_EOM_curve.png')
print 'Extinction = max/min = ' + num2str(
max(measured_power - BG) / min(measured_power - BG), 0)
print 'Done'