def main():
module = AnsibleModule(argument_spec=dict(
outputfile=dict(required=True),
host=dict(required=False),
username=dict(required=False),
password=dict(required=False, no_log=True),
enablePassword=dict(required=False, no_log=True),
deviceType=dict(required=True),
interfaceRange=dict(required=False),
interfaceOption=dict(required=False),
interfaceArg1=dict(required=True),
interfaceArg2=dict(required=False),
interfaceArg3=dict(required=False),
interfaceArg4=dict(required=False),
interfaceArg5=dict(required=False),
interfaceArg6=dict(required=False),
interfaceArg7=dict(required=False),
),
supports_check_mode=False)
interfaceOption = module.params['interfaceOption']
outputfile = module.params['outputfile']
output = ''
# Send the CLi command
if (interfaceOption is None or interfaceOption == ""):
output = output + cnos.interfaceConfig(module, "(config)#", None, None)
elif (interfaceOption == "ethernet"):
output = output + cnos.interfaceConfig(module, "(config)#", "ethernet",
None)
elif (interfaceOption == "loopback"):
output = output + cnos.interfaceConfig(module, "(config)#", "loopback",
None)
elif (interfaceOption == "mgmt"):
output = output + cnos.interfaceConfig(module, "(config)#", "mgmt",
None)
elif (interfaceOption == "port-channel"):
output = output + cnos.interfaceConfig(module, "(config)#",
"port-channel", None)
elif (interfaceOption == "vlan"):
output = output + cnos.interfaceConfig(module, "(config)#", "vlan",
None)
else:
output = "Invalid interface option \n"
# Save it into the file
file = open(outputfile, "a")
file.write(output)
file.close()
# Logic to check when changes occur or not
errorMsg = cnos.checkOutputForError(output)
if (errorMsg is None):
module.exit_json(changed=True,
msg="Interface Configuration is Accomplished")
else:
module.fail_json(msg=errorMsg)
def main():
module = AnsibleModule(argument_spec=dict(
outputfile=dict(required=True),
host=dict(required=True),
username=dict(required=True),
password=dict(required=True, no_log=True),
enablePassword=dict(required=False, no_log=True),
deviceType=dict(required=True),
interfaceRange=dict(required=False),
interfaceArg1=dict(required=True),
interfaceArg2=dict(required=False),
interfaceArg3=dict(required=False),
interfaceArg4=dict(required=False),
interfaceArg5=dict(required=False),
interfaceArg6=dict(required=False),
interfaceArg7=dict(required=False),
),
supports_check_mode=False)
outputfile = module.params['outputfile']
output = ''
# Send the CLi command
if (module.params['interfaceArg1'] == "port-channel"):
output = output + cnos.portChannelConfig(module, "(config)#", None)
else:
output = output + cnos.interfaceConfig(module, "(config)#",
"port-channel", None)
# Save it into the file
file = open(outputfile, "a")
file.write(output)
file.close()
# Logic to check when changes occur or not
errorMsg = cnos.checkOutputForError(output)
if (errorMsg is None):
module.exit_json(changed=True,
msg="Port Channel Configuration is done")
else:
module.fail_json(msg=errorMsg)
def main():
module = AnsibleModule(argument_spec=dict(
outputfile=dict(required=True),
host=dict(required=True),
username=dict(required=True),
password=dict(required=True, no_log=True),
enablePassword=dict(required=False, no_log=True),
deviceType=dict(required=True),
interfaceRange=dict(required=False),
interfaceOption=dict(required=False),
interfaceArg1=dict(required=True),
interfaceArg2=dict(required=False),
interfaceArg3=dict(required=False),
interfaceArg4=dict(required=False),
interfaceArg5=dict(required=False),
interfaceArg6=dict(required=False),
interfaceArg7=dict(required=False),
),
supports_check_mode=False)
username = module.params['username']
password = module.params['password']
enablePassword = module.params['enablePassword']
interfaceRange = module.params['interfaceRange']
interfaceOption = module.params['interfaceOption']
interfaceArg1 = module.params['interfaceArg1']
interfaceArg2 = module.params['interfaceArg2']
interfaceArg3 = module.params['interfaceArg3']
interfaceArg4 = module.params['interfaceArg4']
interfaceArg5 = module.params['interfaceArg5']
interfaceArg6 = module.params['interfaceArg6']
interfaceArg7 = module.params['interfaceArg7']
outputfile = module.params['outputfile']
hostIP = module.params['host']
deviceType = module.params['deviceType']
output = ""
if not HAS_PARAMIKO:
module.fail_json(msg='paramiko is required for this module')
# Create instance of SSHClient object
remote_conn_pre = paramiko.SSHClient()
# Automatically add untrusted hosts (make sure okay for security policy in your environment)
remote_conn_pre.set_missing_host_key_policy(paramiko.AutoAddPolicy())
# initiate SSH connection with the switch
remote_conn_pre.connect(hostIP, username=username, password=password)
time.sleep(2)
# Use invoke_shell to establish an 'interactive session'
remote_conn = remote_conn_pre.invoke_shell()
time.sleep(2)
# Enable and enter configure terminal then send command
output = output + cnos.waitForDeviceResponse("\n", ">", 2, remote_conn)
output = output + cnos.enterEnableModeForDevice(enablePassword, 3,
remote_conn)
# Make terminal length = 0
output = output + cnos.waitForDeviceResponse("terminal length 0\n", "#", 2,
remote_conn)
# Go to config mode
output = output + cnos.waitForDeviceResponse("configure d\n", "(config)#",
2, remote_conn)
# Send the CLi command
if (interfaceOption is None or interfaceOption == ""):
output = output + cnos.interfaceConfig(
remote_conn, deviceType, "(config)#", 2, None, interfaceRange,
interfaceArg1, interfaceArg2, interfaceArg3, interfaceArg4,
interfaceArg5, interfaceArg6, interfaceArg7)
elif (interfaceOption == "ethernet"):
output = output + cnos.interfaceConfig(
remote_conn, deviceType, "(config)#", 2, "ethernet",
interfaceRange, interfaceArg1, interfaceArg2, interfaceArg3,
interfaceArg4, interfaceArg5, interfaceArg6, interfaceArg7)
elif (interfaceOption == "loopback"):
output = output + cnos.interfaceConfig(
remote_conn, deviceType, "(config)#", 2, "loopback",
interfaceRange, interfaceArg1, interfaceArg2, interfaceArg3,
interfaceArg4, interfaceArg5, interfaceArg6, interfaceArg7)
elif (interfaceOption == "mgmt"):
output = output + cnos.interfaceConfig(
remote_conn, deviceType, "(config)#", 2, "mgmt", interfaceRange,
interfaceArg1, interfaceArg2, interfaceArg3, interfaceArg4,
interfaceArg5, interfaceArg6, interfaceArg7)
elif (interfaceOption == "port-aggregation"):
output = output + cnos.interfaceConfig(
remote_conn, deviceType, "(config)#", 2, "port-aggregation",
interfaceRange, interfaceArg1, interfaceArg2, interfaceArg3,
interfaceArg4, interfaceArg5, interfaceArg6, interfaceArg7)
elif (interfaceOption == "vlan"):
output = output + cnos.interfaceConfig(
remote_conn, deviceType, "(config)#", 2, "vlan", interfaceRange,
interfaceArg1, interfaceArg2, interfaceArg3, interfaceArg4,
interfaceArg5, interfaceArg6, interfaceArg7)
else:
output = "Invalid interface option \n"
# Save it into the file
file = open(outputfile, "a")
file.write(output)
file.close()
# Logic to check when changes occur or not
errorMsg = cnos.checkOutputForError(output)
if (errorMsg is None):
module.exit_json(changed=True, msg="Interface Configuration is done")
else:
module.fail_json(msg=errorMsg)
def main():
module = AnsibleModule(
argument_spec=dict(
outputfile=dict(required=True),
host=dict(required=True),
username=dict(required=True),
password=dict(required=True, no_log=True),
enablePassword=dict(required=False, no_log=True),
deviceType=dict(required=True),
interfaceRange=dict(required=False),
interfaceArg1=dict(required=True),
interfaceArg2=dict(required=False),
interfaceArg3=dict(required=False),
interfaceArg4=dict(required=False),
interfaceArg5=dict(required=False),
interfaceArg6=dict(required=False),
interfaceArg7=dict(required=False),),
supports_check_mode=False)
username = module.params['username']
password = module.params['password']
enablePassword = module.params['enablePassword']
interfaceRange = module.params['interfaceRange']
interfaceArg1 = module.params['interfaceArg1']
interfaceArg2 = module.params['interfaceArg2']
interfaceArg3 = module.params['interfaceArg3']
interfaceArg4 = module.params['interfaceArg4']
interfaceArg5 = module.params['interfaceArg5']
interfaceArg6 = module.params['interfaceArg6']
interfaceArg7 = module.params['interfaceArg7']
outputfile = module.params['outputfile']
hostIP = module.params['host']
deviceType = module.params['deviceType']
output = ""
if not HAS_PARAMIKO:
module.fail_json(msg='paramiko is required for this module')
# Create instance of SSHClient object
remote_conn_pre = paramiko.SSHClient()
# Automatically add untrusted hosts (make sure okay for security policy in your environment)
remote_conn_pre.set_missing_host_key_policy(paramiko.AutoAddPolicy())
# initiate SSH connection with the switch
remote_conn_pre.connect(hostIP, username=username, password=password)
time.sleep(2)
# Use invoke_shell to establish an 'interactive session'
remote_conn = remote_conn_pre.invoke_shell()
time.sleep(2)
# Enable and enter configure terminal then send command
output = output + cnos.waitForDeviceResponse("\n", ">", 2, remote_conn)
output = output + cnos.enterEnableModeForDevice(enablePassword, 3, remote_conn)
# Make terminal length = 0
output = output + cnos.waitForDeviceResponse("terminal length 0\n", "#", 2, remote_conn)
# Go to config mode
output = output + cnos.waitForDeviceResponse("configure d\n", "(config)#", 2, remote_conn)
# Send the CLi command
if(interfaceArg1 == "port-aggregation"):
output = output + cnos.portChannelConfig(remote_conn, deviceType, "(config)#", 2, interfaceArg1,
interfaceArg2, interfaceArg3, interfaceArg4, interfaceArg5, interfaceArg6, interfaceArg7)
else:
output = output + cnos.interfaceConfig(remote_conn, deviceType, "(config)#", 2, "port-aggregation", interfaceRange,
interfaceArg1, interfaceArg2, interfaceArg3, interfaceArg4, interfaceArg5, interfaceArg6, interfaceArg7)
# Save it into the file
file = open(outputfile, "a")
file.write(output)
file.close()
# Logic to check when changes occur or not
errorMsg = cnos.checkOutputForError(output)
if(errorMsg is None):
module.exit_json(changed=True, msg="Port Aggregation configuration is done")
else:
module.fail_json(msg=errorMsg)