def remove_repeats(self, return_multiplicity=False):
"""
Condense sequences of repeated values within a sub-array to a single value.
Parameters
----------
return_multiplicity : bool
If True, also return the number of times each value was repeated.
Returns
-------
norepeats : SegArray
Sub-arrays with runs of repeated values replaced with single value
multiplicity : SegArray
If return_multiplicity=True, this array contains the number of times
each value in the returned SegArray was repeated in the original SegArray.
"""
isrepeat = ak.zeros(self.values.size, dtype=ak.bool)
isrepeat[1:] = self.values[:-1] == self.values[1:]
isrepeat[self.segments] = False
truepaths = self.values[~isrepeat]
nhops = self.grouping.sum(~isrepeat)[1]
# truehops = ak.cumsum(~isrepeat)
# nhops = ak.concatenate((truehops[self.segments[1:]], ak.array([truehops.sum()+1]))) - truehops[self.segments]
truesegs = ak.cumsum(nhops) - nhops
norepeats = SegArray(truesegs, truepaths)
if return_multiplicity:
truehopinds = ak.arange(self.valsize)[~isrepeat]
multiplicity = ak.zeros(truepaths.size, dtype=ak.int64)
multiplicity[:-1] = truehopinds[1:] - truehopinds[:-1]
multiplicity[-1] = self.valsize - truehopinds[-1]
return norepeats, SegArray(truesegs, multiplicity)
else:
return norepeats
def test_plus_minus(self):
# Datetime + Datetime not supported
with self.assertRaises(TypeError) as cm:
self.dtvec1 + self.dtvec2
# Datetime slice -> Datetime
leading = self.dtvec1[1:]
trailing = self.dtvec1[:-1]
self.assertTrue(isinstance(leading, ak.Datetime) and isinstance(trailing, ak.Datetime))
# Datetime - Datetime -> Timedelta
diff = leading - trailing
self.assertTrue(isinstance(diff, ak.Timedelta))
self.assertTrue((diff == self.onesecond).all())
# Datetime - DatetimeScalar -> Timedelta
diff = self.dtvec1 - self.dtscalar
trange = ak.timedelta_range(start=0, periods=100, freq='s')
self.assertTrue(isinstance(diff, ak.Timedelta))
self.assertTrue((diff == trange).all())
# DatetimeScalar - Datetime -> Timedelta
diff = self.dtscalar - self.dtvec1
self.assertTrue(isinstance(diff, ak.Timedelta))
self.assertTrue((diff == (-trange)).all())
# Datetime + TimedeltaScalar -> Datetime
t = (trailing + self.onesecond)
self.assertTrue(isinstance(t, ak.Datetime))
self.assertTrue((t == leading).all())
# TimedeltaScalar + Datetime -> Datetime
t = (self.onesecond + trailing)
self.assertTrue(isinstance(t, ak.Datetime))
self.assertTrue((t == leading).all())
# Datetime - TimedeltaScalar -> Datetime
t = leading - self.onesecond
self.assertTrue(isinstance(t, ak.Datetime))
self.assertTrue((t == trailing).all())
# Datetime + Timedelta -> Datetime
t = (trailing + self.tdvec1[1:])
self.assertTrue(isinstance(t, ak.Datetime))
self.assertTrue((t == leading).all())
# Timedelta + Datetime -> Datetime
t = (self.tdvec1[1:] + trailing)
self.assertTrue(isinstance(t, ak.Datetime))
self.assertTrue((t == leading).all())
# Datetime - Timedelat -> Datetime
t = (leading - self.tdvec1[1:])
self.assertTrue(isinstance(t, ak.Datetime))
# Timedelta + Timedelta -> Timedelta
t = self.tdvec1 + self.tdvec1
self.assertTrue(isinstance(t, ak.Timedelta))
self.assertTrue((t == ak.Timedelta(2*ak.ones(100, dtype=ak.int64), unit='s')).all())
# Timedelta + TimedeltaScalar -> Timedelta
t = self.tdvec1 + self.onesecond
self.assertTrue(isinstance(t, ak.Timedelta))
self.assertTrue((t == ak.Timedelta(2*ak.ones(100, dtype=ak.int64), unit='s')).all())
# Timedelta - Timedelta -> Timedelta
t = self.tdvec1 - self.tdvec1
self.assertTrue(isinstance(t, ak.Timedelta))
self.assertTrue((t == ak.Timedelta(ak.zeros(100, dtype=ak.int64), unit='s')).all())
# Timedelta - TimedeltaScalar -> Timedelta
t = self.tdvec1 - self.onesecond
self.assertTrue(isinstance(t, ak.Timedelta))
self.assertTrue((t == ak.Timedelta(ak.zeros(100, dtype=ak.int64), unit='s')).all())
def gen_ranges(starts, ends):
""" Generate a segmented array of variable-length, contiguous
ranges between pairs of start- and end-points.
Parameters
----------
starts : pdarray, int64
The start value of each range
ends : pdarray, int64
The end value (exclusive) of each range
Returns
-------
segments : pdarray, int64
The starting index of each range in the resulting array
ranges : pdarray, int64
The actual ranges, flattened into a single array
"""
if starts.size != ends.size:
raise ValueError("starts and ends must be same size")
if starts.size == 0:
return ak.zeros(0, dtype=ak.int64), ak.zeros(0, dtype=ak.int64)
if not ((ends - starts) > 0).all():
raise ValueError("all ends must be greater than starts")
lengths = ends - starts
segs = ak.cumsum(lengths) - lengths
totlen = lengths.sum()
slices = ak.ones(totlen, dtype=ak.int64)
diffs = ak.concatenate((ak.array([starts[0]]),
starts[1:] - starts[:-1] - lengths[:-1] + 1))
slices[segs] = diffs
return segs, ak.cumsum(slices)
def gen_ranges(starts, ends, stride=1):
""" Generate a segmented array of variable-length, contiguous ranges between pairs of start- and end-points.
Parameters
----------
starts : pdarray, int64
The start value of each range
ends : pdarray, int64
The end value (exclusive) of each range
stride: int
Difference between successive elements of each range
Returns
-------
segments : pdarray, int64
The starting index of each range in the resulting array
ranges : pdarray, int64
The actual ranges, flattened into a single array
"""
if starts.size != ends.size:
raise ValueError("starts and ends must be same length")
if starts.size == 0:
return ak.zeros(0, dtype=ak.int64), ak.zeros(0, dtype=ak.int64)
lengths = (ends - starts) // stride
segs = ak.cumsum(lengths) - lengths
totlen = lengths.sum()
slices = ak.ones(totlen, dtype=ak.int64)
diffs = ak.concatenate(
(ak.array([starts[0]]),
starts[1:] - starts[:-1] - (lengths[:-1] - 1) * stride))
slices[segs] = diffs
return segs, ak.cumsum(slices)
def check_correctness(dtype):
N = 10**4
if dtype == 'int64':
a = ak.randint(0, 2**32, N)
z = ak.zeros(N, dtype=dtype)
elif dtype == 'float64':
a = ak.randint(0, 1, N, dtype=ak.float64)
z = ak.zeros(N, dtype=dtype)
perm = ak.coargsort([a, z])
assert ak.is_sorted(a[perm])
perm = ak.coargsort([z, a])
assert ak.is_sorted(a[perm])
def check_correctness(dtype, random, seed):
Ni = 10**4
Nv = 10**4
if seed is not None:
np.random.seed(seed)
# make indices unique
# if indices are non-unique, results of unordered scatter are variable
npi = np.arange(Ni)
np.random.shuffle(npi)
npc = np.zeros(Nv, dtype=dtype)
aki = ak.array(npi)
akc = ak.zeros(Nv, dtype=dtype)
if random or seed is not None:
if dtype == 'int64':
npv = np.random.randint(0, 2**32, Ni)
elif dtype == 'float64':
npv = np.random.random(Ni)
elif dtype == 'bool':
npv = np.random.randint(0, 1, Ni, dtype=np.bool)
else:
npv = np.ones(Ni, dtype=dtype)
akv = ak.array(npv)
npc[npi] = npv
akc[aki] = akv
assert np.allclose(npc, akc.to_ndarray())
def time_ak_scatter(isize, vsize, trials, dtype, random):
print(">>> arkouda scatter")
cfg = ak.get_config()
Ni = isize * cfg["numLocales"]
Nv = vsize * cfg["numLocales"]
print("numLocales = {}, num_indices = {:,} ; num_values = {:,}".format(
cfg["numLocales"], Ni, Nv))
# Index vector is always random
i = ak.randint(0, Nv, Ni)
c = ak.zeros(Nv, dtype=dtype)
if random:
if dtype == 'int64':
v = ak.randint(0, 2**32, Ni)
elif dtype == 'float64':
v = ak.randint(0, 1, Ni, dtype=ak.float64)
else:
v = ak.ones(Ni, dtype=dtype)
timings = []
for _ in range(trials):
start = time.time()
c[i] = v
end = time.time()
timings.append(end - start)
tavg = sum(timings) / trials
print("Average time = {:.4f} sec".format(tavg))
bytes_per_sec = (i.size * i.itemsize * 3) / tavg
print("Average rate = {:.2f} GiB/sec".format(bytes_per_sec / 2**30))
def append_single(self, x, prepend=False):
'''
Append a single value to each sub-array.
Parameters
----------
x : pdarray or scalar
Single value to append to each sub-array
Returns
-------
SegArray
Copy of original SegArray with values from x appended to each sub-array
'''
if hasattr(x, 'size'):
if x.size != self.size:
raise ValueError(
'Argument must be scalar or same size as SegArray')
if type(x) != type(self.values) or x.dtype != self.dtype:
raise TypeError(
'Argument type must match value type of SegArray')
newlens = self.lengths + 1
newsegs = ak.cumsum(newlens) - newlens
newvals = ak.zeros(newlens.sum(), dtype=self.dtype)
if prepend:
lastscatter = newsegs
else:
lastscatter = newsegs + newlens - 1
newvals[lastscatter] = x
origscatter = ak.arange(self.valsize) + self.grouping.broadcast(
ak.arange(self.size), permute=True)
if prepend:
origscatter += 1
newvals[origscatter] = self.values
return SegArray(newsegs, newvals)
def from_multi_array(cls, m):
"""
Construct a SegArray from a list of columns. This essentially transposes the input,
resulting in an array of rows.
Parameters
----------
m : list of pdarray
List of columns, the rows of which will form the sub-arrays of the output
Returns
-------
SegArray
Array of rows of input
"""
if isinstance(m, ak.pdarray):
size = m.size
n = 1
dtype = m.dtype
else:
s = set(mi.size for mi in m)
if len(s) != 1:
raise ValueError("All columns must have same length")
size = s.pop()
n = len(m)
d = set(mi.dtype for mi in m)
if len(d) != 1:
raise ValueError("All columns must have same dtype")
dtype = d.pop()
newsegs = ak.arange(size) * n
newvals = ak.zeros(size * n, dtype=dtype)
for j in range(len(m)):
newvals[j::len(m)] = m[j]
return cls(newsegs, newvals)
def compare_strategies(length, ncat, op, dtype):
keys = ak.randint(0, ncat, length)
if dtype == 'int64':
vals = ak.randint(0, length // ncat, length)
elif dtype == 'bool':
vals = ak.zeros(length, dtype='bool')
for i in np.random.randint(0, length, ncat // 2):
vals[i] = True
else:
vals = ak.linspace(-1, 1, length)
print("Global groupby", end=' ')
start = time()
gg = ak.GroupBy(keys, False)
ggtime = time() - start
print(ggtime)
print("Global reduce", end=' ')
start = time()
gk, gv = gg.aggregate(vals, op)
grtime = time() - start
print(grtime)
print("Local groupby", end=' ')
start = time()
lg = ak.GroupBy(keys, True)
lgtime = time() - start
print(lgtime)
print("Local reduce", end=' ')
start = time()
lk, lv = lg.aggregate(vals, op)
lrtime = time() - start
print(lrtime)
print(f"Keys match? {(gk == lk).all()}")
print(f"Absolute diff of vals = {ak.abs(gv - lv).sum()}")
return ggtime, grtime, lgtime, lrtime
def expand(vals, segs, size):
""" Broadcast per-segment values to a segmented array. Equivalent
to ak.GroupBy.broadcast(vals) but accepts explicit segments and
size arguments.
Parameters
----------
vals : pdarray
Values (one per segment) to broadcast over segments
segs : pdarray
Start indices of segments
size : int
Total size of result array
Returns
-------
pdarray
Values broadcasted out to segments
"""
if vals.size != segs.size:
raise ValueError("vals and segs must have same size")
if vals.size == 0:
return ak.array([])
if size < segs.size or size <= segs.max():
raise ValueError("Total size cannot be less than max segment")
if segs[0] != 0 or not (segs[:-1] < segs[1:]).all():
raise ValueError(
"segs must start at zero and be monotonically increasing")
temp = ak.zeros(size, dtype=vals.dtype)
diffs = ak.concatenate((ak.array([vals[0]]), vals[1:] - vals[:-1]))
temp[segs] = diffs
return ak.cumsum(temp)
def interval_lookup(keys, values, arguments, fillvalue=-1):
'''
Apply a function defined over non-overlapping intervals to
an array of arguments.
Parameters
----------
keys : 2-tuple of pdarray
Tuple of non-overlapping, half-open intervals expressed
as (lower_bounds_inclusive, upper_bounds_exclusive)
values : pdarray
Function value to return for each entry in keys.
arguments : pdarray
Arguments to the function
fillvalue : scalar
Default value to return when argument is not in any interval.
Returns
-------
pdarray
Value of function corresponding to the keys interval
containing each argument, or fillvalue if argument not
in any interval.
'''
idx = search_intervals(arguments, keys, assume_unique=True)
res = ak.zeros(arguments.size, dtype=values.dtype)
if fillvalue is not None:
res.fill(fillvalue)
found = idx > -1
res[found] = values[idx[found]]
return res
def _get_lengths(self):
if self.size == 0:
return ak.zeros(0, dtype=ak.int64)
elif self.size == 1:
return ak.array([self.valsize])
else:
return ak.concatenate(
(self.segments[1:], ak.array([self.valsize]))) - self.segments
def create_ak_array(N, op, dtype, seed):
if op == 'zeros':
a = ak.zeros(N, dtype=dtype)
elif op == 'ones':
a = ak.ones(N, dtype=dtype)
elif op == 'randint':
a = ak.randint(0, 2**32, N, dtype=dtype, seed=seed)
return a
def check_zeros(N):
# create np version
a = ak.array(np.zeros(10))
# create ak version
b = ak.zeros(10)
# print(a,b)
c = a == b
# print(type(c),c)
return pass_fail(c.all())
def check_zeros(N):
# create np version
a = np.zeros(N)
# create ak version
b = ak.zeros(N)
# print(a,b)
c = a == b.to_ndarray()
# print(type(c),c)
return pass_fail(c.all())
def check_correctness(dtype, seed):
N = 10**4
if dtype == 'int64':
a = ak.randint(0, 2**32, N, seed=seed)
z = ak.zeros(N, dtype=dtype)
elif dtype == 'float64':
a = ak.randint(0, 1, N, dtype=ak.float64, seed=seed)
z = ak.zeros(N, dtype=dtype)
elif dtype == 'str':
a = ak.random_strings_uniform(1, 16, N, seed=seed)
z = ak.cast(ak.zeros(N), 'str')
perm = ak.coargsort([a, z])
if dtype in ('int64', 'float64'):
assert ak.is_sorted(a[perm])
perm = ak.coargsort([z, a])
if dtype in ('int64', 'float64'):
assert ak.is_sorted(a[perm])
def generate_arrays(length, nkeys, nvals, dtype='int64'):
keys = ak.randint(0, nkeys, length)
if dtype == 'int64':
vals = ak.randint(0, nvals, length)
elif dtype == 'bool':
vals = ak.zeros(length, dtype='bool')
for i in np.random.randint(0, length, nkeys // 2):
vals[i] = True
else:
vals = ak.linspace(-1, 1, length)
return keys, vals
def __eq__(self, other):
if not isinstance(other, SegArray):
return NotImplemented
eq = ak.zeros(self.size, dtype=ak.bool)
leneq = self.lengths == other.lengths
if leneq.sum() > 0:
selfcmp = self[leneq]
othercmp = other[leneq]
intersection = self.all(selfcmp.values == othercmp.values)
eq[leneq] = intersection
return eq
def IP_like(N):
'''
Data like a 90/10 mix of IPv4 and IPv6 addresses
'''
multiplicity = 10
nunique = N // (2 * multiplicity)
# First generate unique addresses, then sample with replacement
u1 = ak.zeros(nunique, dtype=ak.int64)
u2 = ak.zeros(nunique, dtype=ak.int64)
v4 = ak.uniform(nunique) < 0.9
n4 = v4.sum()
v6 = ~v4
n6 = v4.size - n4
u1[v4] = ak.randint(0, 2**32, n4)
u1[v6] = ak.randint(-2**63, 2**63, n6)
u2[v6] = ak.randint(-2**63, 2**63, n6)
sample = ak.randint(0, nunique, N // 2)
IP1 = u1[sample]
IP2 = u2[sample]
yield 'IP-like 2*int64', (IP1, IP2)
def in1dmulti(a, b, assume_unique=False):
""" The multi-level analog of ak.in1d -- test membership of rows of a in the set of rows of b.
Parameters
----------
a : list of pdarrays
Rows are elements for which to test membership in b
b : list of pdarrays
Rows are elements of the set in which to test membership
assume_unique : bool
If true, assume rows of a and b are each unique and sorted. By default, sort and unique them explicitly.
Returns
-------
pdarray, bool
True for each row in a that is contained in b
Notes:
Only works for pdarrays of int64 dtype, Strings, or Categorical
"""
if not assume_unique:
ag = ak.GroupBy(a)
ua = ag.unique_keys
bg = ak.GroupBy(b)
ub = bg.unique_keys
else:
ua = a
ub = b
c = [ak.concatenate(x) for x in zip(ua, ub)]
g = ak.GroupBy(c)
k, ct = g.count()
truth = ak.zeros(c[0].size, dtype=ak.bool)
truth[g.permutation] = (g.broadcast(1 * (ct == 2)) == 1)
if assume_unique:
return truth[:a[0].size]
else:
truth2 = ak.zeros(a[0].size, dtype=ak.bool)
truth2[ag.permutation] = (ag.broadcast(1 * truth[:ua[0].size]) == 1)
return truth2
def check_float(N):
a = ak.randint(0, 1, N, dtype=ak.float64)
n = ak.randint(-1, 1, N, dtype=ak.float64)
z = ak.zeros(N, dtype=ak.float64)
perm = ak.coargsort([a])
assert ak.is_sorted(a[perm])
perm = ak.coargsort([a, n])
assert ak.is_sorted(a[perm])
perm = ak.coargsort([n, a])
assert ak.is_sorted(n[perm])
perm = ak.coargsort([z, a])
assert ak.is_sorted(a[perm])
perm = ak.coargsort([z, n])
assert ak.is_sorted(n[perm])
def get_jth(self, j, return_origins=True, compressed=False, default=0):
"""
Select the j-th element of each sub-array, where possible.
Parameters
----------
j : int
The index of the value to get from each sub-array. If j is negative,
it counts backwards from the end of each sub-array.
return_origins : bool
If True, return a logical index indicating where j is in bounds
compressed : bool
If False, return array is same size as self, with default value
where j is out of bounds. If True, the return array only contains
values where j is in bounds.
default : scalar
When compressed=False, the value to return when j is out of bounds
for the sub-array
Returns
-------
val : pdarray
compressed=False: The j-th value of each sub-array where j is in
bounds and the default value where j is out of bounds.
compressed=True: The j-th values of only the sub-arrays where j is
in bounds
origin_indices : pdarray, bool
A Boolean array that is True where j is in bounds for the sub-array.
"""
longenough, newj = self._normalize_index(j)
ind = (self.segments + newj)[longenough]
if compressed:
res = self.values[ind]
else:
res = ak.zeros(self.size, dtype=self.dtype) + default
res[longenough] = self.values[ind]
if return_origins:
return res, longenough
else:
return res
def expand(size, segs, vals):
""" Expand an array with values placed into the indicated segments.
Parameters
----------
size : ak.pdarray
The size of the array to be expanded
segs : ak.pdarray
The indices where the values should be placed
vals : ak.pdarray
The values to be placed in each segment
Returns
-------
pdarray
The expanded array.
"""
temp = ak.zeros(size, vals.dtype)
diffs = ak.concatenate((ak.array([vals[0]]), vals[1:] - vals[:-1]))
temp[segs] = diffs
return ak.cumsum(temp)
def _convert_strings(self, s):
'''
Convert string field names to binary vectors.
'''
# Initialize to zero
values = ak.zeros(s.size, dtype=ak.int64)
if self.separator == '':
# When separator is empty, field names are guaranteed to be single characters
for name, shift in zip(self.names, self.shifts):
# Check if name exists in each string
bit = s.contains(name)
values = values | ak.where(bit, 1 << shift, 0)
else:
# When separator is non-empty, split on it
sf, segs = s.flatten(self.separator, return_segments=True)
# Create a grouping to map split fields back to originating string
orig = ak.broadcast(segs, ak.arange(segs.size), sf.size)
g = ak.GroupBy(orig)
for name, shift in zip(self.names, self.shifts):
# Check if name matches one of the split fields from originating string
bit = g.any(sf == name)[1]
values = values | ak.where(bit, 1 << shift, 0)
return values
def check_int(N):
z = ak.zeros(N, dtype=ak.int64)
a2 = ak.randint(0, 2**16, N)
b2 = ak.randint(0, 2**16, N)
c2 = ak.randint(0, 2**16, N)
d2 = ak.randint(0, 2**16, N)
n2 = ak.randint(-(2**15), 2**15, N)
perm = ak.coargsort([a2])
assert ak.is_sorted(a2[perm])
perm = ak.coargsort([n2])
assert ak.is_sorted(n2[perm])
perm = ak.coargsort([a2, b2, c2, d2])
assert ak.is_sorted(a2[perm])
perm = ak.coargsort([z, b2, c2, d2])
assert ak.is_sorted(b2[perm])
perm = ak.coargsort([z, z, c2, d2])
assert ak.is_sorted(c2[perm])
perm = ak.coargsort([z, z, z, d2])
assert ak.is_sorted(d2[perm])
a4 = ak.randint(0, 2**32, N)
b4 = ak.randint(0, 2**32, N)
n4 = ak.randint(-(2**31), 2**31, N)
perm = ak.coargsort([a4])
assert ak.is_sorted(a4[perm])
perm = ak.coargsort([n4])
assert ak.is_sorted(n4[perm])
perm = ak.coargsort([a4, b4])
assert ak.is_sorted(a4[perm])
perm = ak.coargsort([b4, a4])
assert ak.is_sorted(b4[perm])
a8 = ak.randint(0, 2**64, N)
b8 = ak.randint(0, 2**64, N)
n8 = ak.randint(-(2**63), 2**64, N)
perm = ak.coargsort([a8])
assert ak.is_sorted(a8[perm])
perm = ak.coargsort([n8])
assert ak.is_sorted(n8[perm])
perm = ak.coargsort([b8, a8])
assert ak.is_sorted(b8[perm])
from itertools import permutations
all_perm = permutations([a2, a4, a8])
for p in all_perm:
perm = ak.coargsort(p)
assert ak.is_sorted(p[0][perm])
def inner_join(left, right, wherefunc=None, whereargs=None):
'''Perform inner join on values in <left> and <right>,
using conditions defined by <wherefunc> evaluated on
<whereargs>, returning indices of left-right pairs.
Parameters
----------
left : pdarray(int64)
The left values to join
right : pdarray(int64)
The right values to join
wherefunc : function, optional
Function that takes two pdarray arguments and returns
a pdarray(bool) used to filter the join. Results for
which wherefunc is False will be dropped.
whereargs : 2-tuple of pdarray
The two pdarray arguments to wherefunc
Returns
-------
leftInds : pdarray(int64)
The left indices of pairs that meet the join condition
rightInds : pdarray(int64)
The right indices of pairs that meet the join condition
Notes
-----
The return values satisfy the following assertions
`assert (left[leftInds] == right[rightInds]).all()`
`assert wherefunc(whereargs[0][leftInds], whereargs[1][rightInds]).all()`
'''
from inspect import signature
sample = min((left.size, right.size, 5))
if wherefunc is not None:
if len(signature(wherefunc).parameters) != 2:
raise ValueError("wherefunc must be a function that accepts exactly two arguments")
if whereargs is None or len(whereargs) != 2:
raise ValueError("whereargs must be a 2-tuple with left and right arg arrays")
if whereargs[0].size != left.size:
raise ValueError("Left whereargs must be same size as left join values")
if whereargs[1].size != right.size:
raise ValueError("Right whereargs must be same size as right join values")
try:
_ = wherefunc(whereargs[0][:sample], whereargs[1][:sample])
except Exception as e:
raise ValueError("Error evaluating wherefunc") from e
# Need dense 0-up right index, to filter out left not in right
keep, (denseLeft, denseRight) = right_align(left, right)
if keep.sum() == 0:
# Intersection is empty
return ak.zeros(0, dtype=ak.int64), ak.zeros(0, dtype=ak.int64)
keep = ak.arange(keep.size)[keep]
# GroupBy right
byRight = ak.GroupBy(denseRight)
# Get segment boundaries (starts, ends) of right for each left item
rightSegs = ak.concatenate((byRight.segments, ak.array([denseRight.size])))
starts = rightSegs[denseLeft]
ends = rightSegs[denseLeft+1]
fullSize = (ends - starts).sum()
# print(f"{left.size+right.size:,} input rows --> {fullSize:,} joins ({fullSize/(left.size+right.size):.1f} x) ")
# gen_ranges for gather of right items
fullSegs, ranges = gen_ranges(starts, ends)
# Evaluate where clause
if wherefunc is None:
filtRanges = ranges
filtSegs = fullSegs
keep12 = keep
else:
# Gather right whereargs
rightWhere = whereargs[1][byRight.permutation][ranges]
# Expand left whereargs
leftWhere = ak.broadcast(fullSegs, whereargs[0][keep], ranges.size)
# Evaluate wherefunc and filter ranges, recompute segments
whereSatisfied = wherefunc(leftWhere, rightWhere)
filtRanges = ranges[whereSatisfied]
scan = ak.cumsum(whereSatisfied) - whereSatisfied
filtSegsWithZeros = scan[fullSegs]
filtSegSizes = ak.concatenate((filtSegsWithZeros[1:] - filtSegsWithZeros[:-1],
ak.array([whereSatisfied.sum() - filtSegsWithZeros[-1]])))
keep2 = (filtSegSizes > 0)
filtSegs = filtSegsWithZeros[keep2]
keep12 = keep[keep2]
# Gather right inds and expand left inds
rightInds = byRight.permutation[filtRanges]
leftInds = ak.broadcast(filtSegs, ak.arange(left.size)[keep12], filtRanges.size)
return leftInds, rightInds
def __init__(self,
segments,
values,
copy=False,
lengths=None,
grouping=None):
"""
An array of variable-length arrays, also called a skyline array or ragged array.
Parameters
----------
segments : pdarray, int64
Start index of each sub-array in the flattened values array
values : pdarray
The flattened values of all sub-arrays
copy : bool
If True, make a copy of the input arrays; otherwise, just store a reference.
Returns
-------
SegArray
Data structure representing an array whose elements are variable-length arrays.
Notes
-----
Keyword args 'lengths' and 'grouping' are not user-facing. They are used by the
attach method.
"""
if not isinstance(segments, ak.pdarray) or segments.dtype != ak.int64:
raise TypeError("Segments must be int64 pdarray")
if not ak.is_sorted(segments) or (ak.unique(segments).size !=
segments.size):
raise ValueError("Segments must be unique and in sorted order")
if segments.size > 0:
if segments.min() != 0 or segments.max() >= values.size:
raise ValueError(
"Segments must start at zero and be less than values.size")
elif values.size > 0:
raise ValueError(
"Cannot have non-empty values with empty segments")
if copy:
self.segments = segments[:]
self.values = values[:]
else:
self.segments = segments
self.values = values
self.size = segments.size
self.valsize = values.size
if lengths is None:
self.lengths = self._get_lengths()
else:
self.lengths = lengths
self.dtype = values.dtype
if grouping is None:
if self.size == 0:
self.grouping = ak.GroupBy(ak.zeros(0, dtype=ak.int64))
else:
# Treat each sub-array as a group, for grouped aggregations
self.grouping = ak.GroupBy(
ak.broadcast(self.segments, ak.arange(self.size),
self.valsize))
else:
self.grouping = grouping
def inner_join2(left, right, wherefunc=None, whereargs=None, forceDense=False):
'''Perform inner join on values in <left> and <right>,
using conditions defined by <wherefunc> evaluated on
<whereargs>, returning indices of left-right pairs.
Parameters
----------
left : pdarray(int64)
The left values to join
right : pdarray(int64)
The right values to join
wherefunc : function, optional
Function that takes two pdarray arguments and returns
a pdarray(bool) used to filter the join. Results for
which wherefunc is False will be dropped.
whereargs : 2-tuple of pdarray
The two pdarray arguments to wherefunc
Returns
-------
leftInds : pdarray(int64)
The left indices of pairs that meet the join condition
rightInds : pdarray(int64)
The right indices of pairs that meet the join condition
Notes
-----
The return values satisfy the following assertions
`assert (left[leftInds] == right[rightInds]).all()`
`assert wherefunc(whereargs[0][leftInds], whereargs[1][rightInds]).all()`
'''
if not isinstance(left, ak.pdarray) or left.dtype != ak.int64 or not isinstance(right, ak.pdarray) or right.dtype != ak.int64:
raise ValueError("left and right must be pdarray(int64)")
if wherefunc is not None:
from inspect import signature
sample = min((left.size, right.size, 5))
if len(signature(wherefunc).parameters) != 2:
raise ValueError("wherefunc must be a function that accepts exactly two arguments")
if whereargs is None or len(whereargs) != 2:
raise ValueError("whereargs must be a 2-tuple with left and right arg arrays")
if whereargs[0].size != left.size:
raise ValueError("Left whereargs must be same size as left join values")
if whereargs[1].size != right.size:
raise ValueError("Right whereargs must be same size as right join values")
try:
_ = wherefunc(whereargs[0][:sample], whereargs[1][:sample])
except Exception as e:
raise ValueError("Error evaluating wherefunc") from e
# Only join on intersection
inter = ak.intersect1d(left, right)
# Indices of left values present in intersection
leftInds = ak.arange(left.size)[ak.in1d(left, inter)]
# Left vals in intersection
leftFilt = left[leftInds]
# Indices of right vals present in inter
rightInds = ak.arange(right.size)[ak.in1d(right, inter)]
# Right vals in inter
rightFilt = right[rightInds]
byLeft = ak.GroupBy(leftFilt)
byRight = ak.GroupBy(rightFilt)
maxVal = inter.max()
if forceDense or maxVal > 3*(left.size + right.size):
# Remap intersection to dense, 0-up codes
# Replace left values with dense codes
uniqLeftVals = byLeft.unique_keys
uniqLeftCodes = ak.arange(inter.size)[ak.in1d(inter, uniqLeftVals)]
leftCodes = ak.zeros_like(leftFilt) - 1
leftCodes[byLeft.permutation] = byLeft.broadcast(uniqLeftCodes, permute=False)
# Replace right values with dense codes
uniqRightVals = byRight.unique_keys
uniqRightCodes = ak.arange(inter.size)[ak.in1d(inter, uniqRightVals)]
rightCodes = ak.zeros_like(rightFilt) - 1
rightCodes[byRight.permutation] = byRight.broadcast(uniqRightCodes, permute=False)
countSize = inter.size
else:
uniqLeftCodes = byLeft.unique_keys
uniqRightCodes = byRight.unique_keys
leftCodes = leftFilt
rightCodes = rightFilt
countSize = maxVal + 1
# Expand indices to product domain
# First count occurrences of each code in left and right
leftCounts = ak.zeros(countSize, dtype=ak.int64)
leftCounts[uniqLeftCodes] = byLeft.count()[1]
rightCounts = ak.zeros(countSize, dtype=ak.int64)
rightCounts[uniqRightCodes] = byRight.count()[1]
# Repeat each left index as many times as that code occurs in right
prodLeft = rightCounts[leftCodes]
leftFullInds = ak.broadcast(ak.cumsum(prodLeft)-prodLeft, leftInds, prodLeft.sum())
prodRight = leftCounts[rightCodes]
rightFullInds = ak.broadcast(ak.cumsum(prodRight)-prodRight, rightInds, prodRight.sum())
# Evaluate where clause
if wherefunc is None:
return leftFullInds, rightFullInds
else:
# Gather whereargs
leftWhere = whereargs[0][leftFullInds]
rightWhere = whereargs[1][rightFullInds]
# Evaluate wherefunc and filter ranges, recompute segments
whereSatisfied = wherefunc(leftWhere, rightWhere)
return leftFullInds[whereSatisfied], rightFullInds[whereSatisfied]
def concat(cls, x, axis=0, ordered=True):
"""
Concatenate a sequence of SegArrays
Parameters
----------
x : sequence of SegArray
The SegArrays to concatenate
axis : 0 or 1
Select vertical (0) or horizontal (1) concatenation. If axis=1, all
SegArrays must have same size.
ordered : bool
Must be True. This option is present for compatibility only, because unordered
concatenation is not yet supported.
Returns
-------
SegArray
The input arrays joined into one SegArray
"""
if not ordered:
raise ValueError(
"Unordered concatenation not yet supported on SegArray; use ordered=True."
)
if len(x) == 0:
raise ValueError("Empty sequence passed to concat")
for xi in x:
if not isinstance(xi, cls):
return NotImplemented
if len(set(xi.dtype for xi in x)) != 1:
raise ValueError(
"SegArrays must all have same dtype to concatenate")
if axis == 0:
ctr = 0
segs = []
vals = []
for xi in x:
# Segment offsets need to be raised by length of previous values
segs.append(xi.segments + ctr)
ctr += xi.valsize
# Values can just be concatenated
vals.append(xi.values)
return cls(ak.concatenate(segs), ak.concatenate(vals))
elif axis == 1:
sizes = set(xi.size for xi in x)
if len(sizes) != 1:
raise ValueError(
"SegArrays must all have same size to concatenate with axis=1"
)
if sizes.pop() == 0:
return x[0]
dt = list(x)[0].dtype
newlens = sum(xi.lengths for xi in x)
newsegs = ak.cumsum(newlens) - newlens
# Ignore sub-arrays that are empty in all arrays
nonzero = ak.concatenate(
(newsegs[:-1] < newsegs[1:], ak.array([True])))
nzsegs = newsegs[nonzero]
newvals = ak.zeros(newlens.sum(), dtype=dt)
for xi in x:
# Set up fromself for a scan, so that it steps up at the start of a segment
# from the current array, and steps back down at the end
fromself = ak.zeros(newvals.size + 1, dtype=ak.int64)
fromself[nzsegs] += 1
nzlens = xi.lengths[nonzero]
fromself[nzsegs + nzlens] -= 1
fromself = (ak.cumsum(fromself[:-1]) == 1)
newvals[fromself] = xi.values
nzsegs += nzlens
return cls(newsegs, newvals, copy=False)
else:
raise ValueError(
"Supported values for axis are 0 (vertical concat) or 1 (horizontal concat)"
)