Exemplo n.º 1
0
class Traffic:
    """
    Traffic class definition    : Traffic data

    Methods:
        Traffic()            :  constructor
        reset()              :  Reset traffic database w.r.t a/c data

        create(acid,actype,aclat,aclon,achdg,acalt,acspd) : create aircraft
        delete(acid)         : delete an aircraft from traffic data
        deletall()           : delete all traffic
        update(sim)          : do a numerical integration step
        id2idx(name)         : return index in traffic database of given call sign
        selhdg(i,hdg)        : set autopilot heading and activate heading select mode
        selspd(i,spd)        : set autopilot CAS/Mach and activate heading select mode

        engchange(i,engtype) : change engine type of an aircraft

        changeTrailColor(color,idx)     : change colour of trail of aircraft idx

        setNoise(A)          : Add turbulence

    Members: see create

    Created by  : Jacco M. Hoekstra
    """

    def __init__(self, navdb):

        self.reset(navdb)
        return

    def reset(self, navdb):
        self.dts = []
        self.ntraf = 0

        #  model-specific parameters.
        # Default: BlueSky internal performance model.
        # Insert your BADA files to the folder "BlueSky/data/coefficients/BADA"
        # for working with EUROCONTROL`s Base of Aircraft Data revision 3.12

        self.perf = Perf(self)

        self.dts = []

        self.ntraf = 0

        # Traffic list & arrays definition

        # !!!IMPORTANT NOTE!!!
        # Any variables added here should also be added in the Traffic
        # methods self.create() (append) and self.delete() (delete)
        # which can be found directly below __init__

        # Traffic basic flight data

        # Traffic basic flight data
        self.id     = []  # identifier (string)
        self.type   = []  # aircaft type (string)
        self.lat    = np.array([])  # latitude [deg]
        self.lon    = np.array([])  # longitude [deg]
        self.trk    = np.array([])  # track angle [deg]
        self.tas    = np.array([])  # true airspeed [m/s]
        self.gs     = np.array([])  # ground speed [m/s]
        self.cas    = np.array([])  # calibrated airspeed [m/s]
        self.M      = np.array([])  # mach number
        self.alt    = np.array([])  # altitude [m]
        self.fll    = np.array([])  # flight level [ft/100]
        self.vs     = np.array([])  # vertical speed [m/s]
        self.p      = np.array([])  # atmospheric air pressure [N/m2]
        self.rho    = np.array([])  # atmospheric air density [kg/m3]
        self.Temp   = np.array([])  # atmospheric air temperature [K]
        self.dtemp  = np.array([])  # delta t for non-ISA conditions

        # Traffic performance data
        self.avsdef = np.array([])  # [m/s]default vertical speed of autopilot
        self.aphi   = np.array([])  # [rad] bank angle setting of autopilot
        self.ax     = np.array([])  # [m/s2] absolute value of longitudinal accelleration
        self.bank   = np.array([])  # nominal bank angle, [radian]
        self.bphase = np.array([])  # standard bank angles per phase
        self.hdgsel = np.array([])  # determines whether aircraft is turning

        # Help variables to save computation time
        self.coslat = np.array([])  # Cosine of latitude for flat-earth aproximations

        # Crossover altitude
        self.abco   = np.array([])
        self.belco  = np.array([])

        # Traffic autopilot settings
        self.ahdg   = []  # selected heading [deg]
        self.aspd   = []  # selected spd(CAS) [m/s]
        self.aptas  = []  # just for initializing
        self.ama    = []  # selected spd above crossover altitude (Mach) [-]
        self.aalt   = []  # selected alt[m]
        self.afll   = []  # selected fl [ft/100]
        self.avs    = []  # selected vertical speed [m/s]

        # limit settings
        self.lspd   = []  # limit speed
        self.lalt   = []  # limit altitude
        self.lvs    = []  # limit vertical speed due to thrust limitation

        # Traffic navigation information
        self.orig   = []  # Four letter code of origin airport
        self.dest   = []  # Four letter code of destination airport

        # LNAV route navigation
        self.swlnav = np.array([])  # Lateral (HDG) based on nav?
        self.swvnav = np.array([])  # Vertical/longitudinal (ALT+SPD) based on nav info

        self.actwplat  = np.array([])  # Active WP latitude
        self.actwplon  = np.array([])  # Active WP longitude
        self.actwpalt  = np.array([])  # Active WP altitude to arrive at
        self.actwpspd  = np.array([])  # Active WP speed
        self.actwpturn = np.array([])  # Distance when to turn to next waypoint
        self.actwpflyby = np.array([])  # Distance when to turn to next waypoint
      

        # VNAV variablescruise level
        self.crzalt  = np.array([])    # Cruise altitude[m]
        self.dist2vs = np.array([])    # Distance to start V/S of VANAV
        self.actwpvs = np.array([])    # Actual V/S to use

        # Route info
        self.route = []

        # ASAS info per aircraft:
        self.iconf      = []            # index in 'conflicting' aircraft database
        self.asasactive = np.array([])  # whether the autopilot follows ASAS or not
        self.asashdg    = np.array([])  # heading provided by the ASAS [deg]
        self.asasspd    = np.array([])  # speed provided by the ASAS (eas) [m/s]
        self.asasalt    = np.array([])  # speed alt by the ASAS [m]
        self.asasvsp    = np.array([])  # speed vspeed by the ASAS [m/s]

        self.desalt     = np.array([])  # desired altitude [m]
        self.deshdg     = np.array([])  # desired heading
        self.desvs      = np.array([])  # desired vertical speed [m/s]
        self.desspd     = np.array([])  # desired speed [m/s]

        # Display information on label
        self.label      = []  # Text and bitmap of traffic label
        self.trailcol   = []  # Trail color: default 'Blue'

        # Transmitted data to other aircraft due to truncated effect
        self.adsbtime   = np.array([])
        self.adsblat    = np.array([])
        self.adsblon    = np.array([])
        self.adsbalt    = np.array([])
        self.adsbtrk    = np.array([])
        self.adsbtas    = np.array([])
        self.adsbgs     = np.array([])
        self.adsbvs     = np.array([])

        self.inconflict = np.array([], dtype=bool)

        #-----------------------------------------------------------------------------
        # Not per aircraft data

        # Scheduling of FMS and ASAS
        self.t0fms = -999.  # last time fms was called
        self.dtfms = 1.01  # interval for fms

        self.t0asas = -999.  # last time ASAS was called
        self.dtasas = 1.00  # interval for ASAS

        # Flight performance scheduling
        self.perfdt = 0.1           # [s] update interval of performance limits
        self.perft0 = -self.perfdt  # [s] last time checked (in terms of simt)
        self.warned2 = False        # Flag: Did we warn for default engine parameters yet?

        # ADS-B transmission-receiver model
        self.adsb = ADSBModel(self)

        # ASAS objects: Conflict Database
        self.dbconf = Dbconf(self, 300., 5. * nm, 1000. * ft)  # hard coded values to be replaced

        # Import navigation data base
        self.navdb  = navdb

        # Traffic area: delete traffic when it leaves this area (so not when outside)
        self.swarea    = False
        self.arealat0  = 0.0  # [deg] lower latitude defining area
        self.arealat1  = 0.0  # [deg] upper latitude defining area
        self.arealon0  = 0.0  # [deg] lower longitude defining area
        self.arealon1  = 0.0  # [deg] upper longitude defining area
        self.areafloor = -999999.0  # [m] Delete when descending through this h
        self.areadt    = 5.0  # [s] frequency of area check (simtime)
        self.areat0    = -100.  # last time checked
        self.arearadius    = 100.0 # [NM] radius of experiment area if it is a circle

        self.inside = []
        self.fir_circle_point = (0.0, 0.0)
        self.fir_circle_radius = 1.0

        # Taxi switch
        self.swtaxi = False  # Default OFF: delete traffic below 1500 ft

        # Research Area ("Square" for Square, "Circle" for Circle area)
        self.area = ""

        # Bread crumbs for trails
        self.lastlat  = []
        self.lastlon  = []
        self.lasttim  = []
        self.trails   = Trails()
        self.swtrails = False  # Default switched off

        # Noise (turbulence, ADBS-transmission noise, ADSB-truncated effect)
        self.setNoise(False)

        self.eps = np.array([])

        return

    def mcreate(self, count, actype=None, alt=None, spd=None, dest=None, area=None):
        """ Create multiple random aircraft in a specified area """
        idbase = chr(randint(65, 90)) + chr(randint(65, 90))
        if actype is None:
            actype = 'B744'

        for i in xrange(count):
            acid  = idbase + '%05d' % i
            aclat = random() * (area[1] - area[0]) + area[0]
            aclon = random() * (area[3] - area[2]) + area[2]
            achdg = float(randint(1, 360))
            acalt = (randint(2000, 39000) * ft) if alt is None else alt
            acspd = (randint(250, 450) * kts) if spd is None else spd

            self.create(acid, actype, aclat, aclon, achdg, acalt, acspd)

    def create(self, acid, actype, aclat, aclon, achdg, acalt, casmach):
        """Create an aircraft"""
        # Check if not already exist
        if self.id.count(acid.upper()) > 0:
            return False, acid + " already exists."  # already exists do nothing

        # Increase number of aircraft
        self.ntraf = self.ntraf + 1

        # Convert speed
        if 0.1 < casmach < 1.0 :
            acspd = mach2tas(casmach, acalt)
        else:
            acspd = cas2tas(casmach, acalt)

        # Process input
        self.id.append(acid.upper())
        self.type.append(actype)
        self.lat   = np.append(self.lat, aclat)
        self.lon   = np.append(self.lon, aclon)
        self.trk   = np.append(self.trk, achdg)  # TBD: add conversion hdg => trk
        self.alt   = np.append(self.alt, acalt)
        self.fll   = np.append(self.fll, (acalt)/(100 * ft))
        self.vs    = np.append(self.vs, 0.)
        c_temp, c_rho, c_p = vatmos(acalt)
        self.p     = np.append(self.p, c_p)
        self.rho   = np.append(self.rho, c_rho)
        self.Temp  = np.append(self.Temp, c_temp)
        self.dtemp = np.append(self.dtemp, 0)  # at the moment just ISA conditions
        self.tas   = np.append(self.tas, acspd)
        self.gs    = np.append(self.gs, acspd)
        self.cas   = np.append(self.cas, tas2cas(acspd, acalt))
        self.M     = np.append(self.M, tas2mach(acspd, acalt))

        # AC is initialized with neutral max bank angle
        self.bank = np.append(self.bank, radians(25.))
        if self.ntraf < 2:
            self.bphase = np.deg2rad(np.array([15, 35, 35, 35, 15, 45]))
        self.hdgsel = np.append(self.hdgsel, False)

        #------------------------------Performance data--------------------------------
        # Type specific data
        #(temporarily default values)
        self.avsdef = np.append(self.avsdef, 1500. * fpm)  # default vertical speed of autopilot
        self.aphi   = np.append(self.aphi, radians(25.))  # bank angle setting of autopilot
        self.ax     = np.append(self.ax, kts)  # absolute value of longitudinal accelleration

        # Crossover altitude
        self.abco   = np.append(self.abco, 0)
        self.belco  = np.append(self.belco, 1)

        # performance data
        self.perf.create(actype)

        # Traffic autopilot settings: hdg[deg], spd (CAS,m/s), alt[m], vspd[m/s]
        self.ahdg = np.append(self.ahdg, achdg)  # selected heading [deg]
        self.aspd = np.append(self.aspd, tas2cas(acspd, acalt))  # selected spd(cas) [m/s]
        self.aptas = np.append(self.aptas, acspd) # [m/s]
        self.ama  = np.append(self.ama, 0.) # selected spd above crossover (Mach) [-]
        self.aalt = np.append(self.aalt, acalt)  # selected alt[m]
        self.afll = np.append(self.afll, (acalt/100)) # selected fl[ft/100]
        self.avs = np.append(self.avs, 0.)  # selected vertical speed [m/s]
        
        # limit settings: initialize with 0
        self.lspd = np.append(self.lspd, 0.0)
        self.lalt = np.append(self.lalt, 0.0)
        self.lvs = np.append(self.lvs, 0.0)

        # Help variables to save computation time
        self.coslat = np.append(self.coslat,cos(radians(aclat)))  # Cosine of latitude for flat-earth aproximations

        # Traffic navigation information
        self.dest.append("")
        self.orig.append("")

        # LNAV route navigation
        self.swlnav = np.append(self.swlnav, False)  # Lateral (HDG) based on nav
        self.swvnav = np.append(self.swvnav, False)  # Vertical/longitudinal (ALT+SPD) based on nav info

        self.actwplat  = np.append(self.actwplat, 89.99)  # Active WP latitude
        self.actwplon  = np.append(self.actwplon, 0.0)   # Active WP longitude
        self.actwpalt  = np.append(self.actwpalt, 0.0)   # Active WP altitude
        self.actwpspd  = np.append(self.actwpspd, -999.)   # Active WP speed
        self.actwpturn = np.append(self.actwpturn, 1.0)   # Distance to active waypoint where to turn
        self.actwpflyby = np.append(self.actwpflyby, 1.0)   # Flyby/fly-over switch

        # VNAV cruise level
        self.crzalt = np.append(self.crzalt,-999.) # Cruise altitude[m] <0=None
        self.dist2vs = np.append(self.dist2vs,-999.)  # Distance to start V/S of VANAV
        self.actwpvs = np.append(self.actwpvs,0.0)    # Actual V/S to use then

        # Route info
        self.route.append(Route(self.navdb))  # create empty route connected with nav databse

        eas = tas2eas(acspd, acalt)

        # ASAS info: no conflict => -1
        self.iconf.append(-1)  # index in 'conflicting' aircraft database

        # ASAS output commanded values
        self.asasactive = np.append(self.asasactive, False)
        self.asashdg = np.append(self.asashdg, achdg)
        self.asasspd = np.append(self.asasspd, eas)
        self.asasalt = np.append(self.asasalt, acalt)
        self.asasvsp = np.append(self.asasvsp, 0.)

        self.desalt  = np.append(self.desalt, acalt)
        self.desvs   = np.append(self.desvs, 0.0)
        self.desspd  = np.append(self.desspd, eas)
        self.deshdg  = np.append(self.deshdg, achdg)

        # Area variable set to False to avoid deletion upon creation outside
        self.inside.append(False)

        # Display information on label
        self.label.append(['', '', '', 0])

        # Bread crumbs for trails
        self.trailcol.append(self.trails.defcolor)
        self.lastlat = np.append(self.lastlat, aclat)
        self.lastlon = np.append(self.lastlon, aclon)
        self.lasttim = np.append(self.lasttim, 0.0)

        # Transmitted data to other aircraft due to truncated effect
        self.adsbtime=np.append(self.adsbtime,np.random.rand(self.trunctime))
        self.adsblat=np.append(self.adsblat,aclat)
        self.adsblon=np.append(self.adsblon,aclon)
        self.adsbalt=np.append(self.adsbalt,acalt)
        self.adsbtrk=np.append(self.adsbtrk,achdg)
        self.adsbtas=np.append(self.adsbtas,acspd)
        self.adsbgs=np.append(self.adsbgs,acspd)
        self.adsbvs=np.append(self.adsbvs,0.)

        self.inconflict=np.append(self.inconflict,False)        

        self.eps = np.append(self.eps, 0.01)

        return True

    def delete(self, acid):
        """Delete an aircraft"""

        # Look up index of aircraft
        idx = self.id2idx(acid)
        
        # Do nothing if not found
        if idx<0:
            return False

        del self.id[idx]
        del self.type[idx]

        # Traffic basic data
        self.lat    = np.delete(self.lat, idx)
        self.lon    = np.delete(self.lon, idx)
        self.trk    = np.delete(self.trk, idx)
        self.alt    = np.delete(self.alt, idx)
        self.fll    = np.delete(self.fll, idx)
        self.vs     = np.delete(self.vs, idx)
        self.tas    = np.delete(self.tas, idx)
        self.gs     = np.delete(self.gs, idx)
        self.cas    = np.delete(self.cas, idx)
        self.M      = np.delete(self.M, idx)

        self.p      = np.delete(self.p, idx)
        self.rho    = np.delete(self.rho, idx)
        self.Temp   = np.delete(self.Temp, idx)
        self.dtemp  = np.delete(self.dtemp, idx)
        self.hdgsel = np.delete(self.hdgsel, idx)
        self.bank   = np.delete(self.bank, idx)

        # Crossover altitude
        self.abco   = np.delete(self.abco, idx)
        self.belco  = np.delete(self.belco, idx)

        # Type specific data (temporarily default values)
        self.avsdef = np.delete(self.avsdef, idx)
        self.aphi   = np.delete(self.aphi, idx)
        self.ax     = np.delete(self.ax, idx)

        # performance data
        self.perf.delete(idx)

        # Traffic autopilot settings: hdg[deg], spd (CAS,m/s), alt[m], vspd[m/s]
        self.ahdg   = np.delete(self.ahdg, idx)
        self.aspd   = np.delete(self.aspd, idx)
        self.ama    = np.delete(self.ama, idx)
        self.aptas  = np.delete(self.aptas, idx)
        self.aalt   = np.delete(self.aalt, idx)
        self.afll   = np.delete(self.afll, idx)
        self.avs    = np.delete(self.avs, idx)

        # limit settings
        self.lspd   = np.delete(self.lspd, idx)
        self.lalt   = np.delete(self.lalt, idx)
        self.lvs    = np.delete(self.lvs, idx)

        # Help variables to save computation time
        self.coslat = np.delete(self.coslat,idx)  # Cosine of latitude for flat-earth aproximations

        # Traffic navigation variables
        del self.dest[idx]
        del self.orig[idx]

        self.swlnav = np.delete(self.swlnav, idx)
        self.swvnav = np.delete(self.swvnav, idx)

        self.actwplat  = np.delete(self.actwplat,  idx)
        self.actwplon  = np.delete(self.actwplon,  idx)
        self.actwpalt  = np.delete(self.actwpalt,  idx)
        self.actwpspd  = np.delete(self.actwpspd,  idx)
        self.actwpturn = np.delete(self.actwpturn, idx)
        self.actwpflyby = np.delete(self.actwpflyby, idx)


        # VNAV cruise level
        self.crzalt    = np.delete(self.crzalt,  idx)
        self.dist2vs   = np.delete(self.dist2vs, idx)    # Distance to start V/S of VANAV
        self.actwpvs   = np.delete(self.actwpvs, idx)    # Actual V/S to use


        # Route info
        del self.route[idx]

        # ASAS output commanded values
        del self.iconf[idx]
        self.asasactive = np.delete(self.asasactive, idx)
        self.asashdg    = np.delete(self.asashdg, idx)
        self.asasspd    = np.delete(self.asasspd, idx)
        self.asasalt    = np.delete(self.asasalt, idx)
        self.asasvsp    = np.delete(self.asasvsp, idx)

        self.desalt     = np.delete(self.desalt, idx)
        self.desvs      = np.delete(self.desvs, idx)
        self.desspd     = np.delete(self.desspd, idx)
        self.deshdg     = np.delete(self.deshdg, idx)

        # Metrics, area
        del self.inside[idx]

        # Traffic display data: label
        del self.label[idx]

        # Delete bread crumb data
        self.lastlat = np.delete(self.lastlat, idx)
        self.lastlon = np.delete(self.lastlon, idx)
        self.lasttim = np.delete(self.lasttim, idx)
        del self.trailcol[idx]

        # Transmitted data to other aircraft due to truncated effect
        self.adsbtime = np.delete(self.adsbtime, idx)
        self.adsblat  = np.delete(self.adsblat, idx)
        self.adsblon  = np.delete(self.adsblon, idx)
        self.adsbalt  = np.delete(self.adsbalt, idx)
        self.adsbtrk  = np.delete(self.adsbtrk, idx)
        self.adsbtas  = np.delete(self.adsbtas, idx)
        self.adsbgs   = np.delete(self.adsbgs, idx)
        self.adsbvs   = np.delete(self.adsbvs, idx)

        self.inconflict = np.delete(self.inconflict, idx)

        # Decrease number fo aircraft
        self.ntraf = self.ntraf - 1

        self.eps = np.delete(self.eps, idx)
        return True

    def update(self, simt, simdt):
        # Update only necessary if there is traffic
        if self.ntraf == 0:
            return

        self.dts.append(simdt)

        #---------------- Atmosphere ----------------
        self.p, self.rho, self.Temp = vatmos(self.alt)

        #-------------- Performance limits autopilot settings --------------
        # Check difference with AP settings for trafperf and autopilot
        self.delalt = self.aalt - self.alt  # [m]
        
        # below crossover altitude: CAS=const, above crossover altitude: MA = const
        # aptas hast to be calculated before delspd
        self.aptas = vcas2tas(self.aspd, self.alt)*self.belco + vmach2tas(self.ama, self.alt)*self.abco  
        self.delspd = self.aptas - self.tas 
   

        ###############################################################################
        # Debugging: add 10000 random aircraft
        #            if simt>1.0 and self.ntraf<1000:
        #                for i in range(10000):
        #                   acid="KL"+str(i)
        #                   aclat = random.random()*180.-90.
        #                   aclon = random.random()*360.-180.
        #                   achdg = random.random()*360.
        #                   acalt = (random.random()*18000.+2000.)*0.3048
        #                   self.create(acid,'B747',aclat,aclon,achdg,acalt,350.)
        #
        #################################################################################
        
        #-------------------- ADSB update: --------------------

        self.adsbtime = self.adsbtime + simdt
        if self.ADSBtrunc:
            ADSB_update = np.where(self.adsbtime>self.trunctime)
        else:
            ADSB_update = range(self.ntraf)

        for i in ADSB_update:
            self.adsbtime[i] = self.adsbtime[i] - self.trunctime
            self.adsblat[i]  = self.lat[i]
            self.adsblon[i]  = self.lon[i]
            self.adsbalt[i]  = self.alt[i]
            self.adsbtrk[i]  = self.trk[i]
            self.adsbtas[i]  = self.tas[i]
            self.adsbgs[i]   = self.gs[i]
            self.adsbvs[i]   = self.vs[i]

        # New version ADSB Model
        self.adsb.update()        

        #------------------- ASAS update: ---------------------
        # Scheduling: when dt has passed or restart:
        if self.t0asas+self.dtasas<simt or simt<self.t0asas \
            and self.dbconf.swasas:
            self.t0asas = simt

            # Save old result
            iconf0 = np.array(self.iconf)

            # Call with traffic database and sim data
            self.dbconf.detect()
            self.dbconf.conflictlist(simt)
            self.dbconf.APorASAS()
            self.dbconf.resolve()

            # Reset label because of colour change
            chnged = np.where(iconf0!=np.array(self.iconf))[0]
            for i in chnged:
                self.label[i]=[" "," ", ""," "]


        #-----------------  FMS GUIDANCE & NAVIGATION  ------------------
        # Scheduling: when dt has passed or restart:
        if self.t0fms+self.dtfms<simt or simt<self.t0fms:
            self.t0fms = simt
            
            # FMS LNAV mode:
            qdr, dist = qdrdist(self.lat, self.lon, self.actwplat, self.actwplon) #[deg][nm])

            # Check whether shift based dist [nm] is required, set closer than WP turn distance
            iwpclose = np.where(self.swlnav*(dist < self.actwpturn))[0]
            
            # Shift waypoints for aircraft i where necessary
            for i in iwpclose:

                # Get next wp (lnavon = False if no more waypoints)
                lat, lon, alt, spd, xtoalt, toalt, lnavon, flyby =  \
                       self.route[i].getnextwp()  # note: xtoalt,toalt in [m]

                # End of route/no more waypoints: switch off LNAV
                if not lnavon:
                    self.swlnav[i] = False # Drop LNAV at end of route

                # In case of no LNAV, do not allow VNAV mode on it sown
                if not self.swlnav[i]:
                    self.swvnav[i] = False
                    
                self.actwplat[i]   = lat
                self.actwplon[i]   = lon
                self.actwpflyby[i] = int(flyby) # 1.0 in case of fly by, els fly over

                # User entered altitude

                if alt >= 0.:
                    self.actwpalt[i] = alt
                    
                # VNAV=-ALT mode
                # calculated altitude is available and active
                if toalt  >= 0. and self.swvnav[i]: # somewhere there is an altitude constraint ahead

                    # Descent VNAV mode (T/D logic)
                    if self.alt[i] > toalt+10.*ft:       

                        #Steepness dh/dx in [m/m], for now 1:3 rule of thumb
                        steepness = 3000.*ft/(10.*nm)
                        
                        #Calculate max allowed altitude at next wp (above toalt)
                        self.actwpalt[i] = toalt + xtoalt*steepness

                        # Dist to waypoint where descent should start
                        self.dist2vs[i] = (self.alt[i]-self.actwpalt[i])/steepness
 
                        # Flat earth distance to next wp
                        dy = (lat-self.lat[i])
                        dx = (lon-self.lon[i])*self.coslat[i]
                        legdist = 60.*nm*sqrt(dx*dx+dy*dy)


                        #If descent is urgent, descent with maximum steepness
                        if legdist < self.dist2vs[i]:
                            self.aalt[i] = self.actwpalt[i] # dial in altitude of next waypoint as calculated

                            t2go         = max(0.1,legdist)/max(0.01,self.gs[i])
                            self.actwpvs[i]  = (self.actwpalt[i] - self.alt[i])/t2go
                                              
                        else: 

                            # normal case: still time till descent starts
                       
                            # Calculate V/s using steepness, 
                            # protect against zero/invalid ground speed value
                            self.actwpvs[i] = -steepness*(self.gs[i] +   \
                                            (self.gs[i]<0.2*self.tas[i])*self.tas[i])

                    # Climb VNAV mode: climb as soon as possible (T/C logic)                        
                    elif self.swvnav[i] and self.alt[i]<toalt-10.*ft:

                        self.actwpalt[i] = toalt
                        self.aalt[i]     = self.actwpalt[i] # dial in altitude of next waypoint as calculated
                        self.dist2vs[i]  = 9999.

                    # Level leg: never start V/S
                    else:
                        self.dist2vs[i] = -999.
                        
                #No altirude defined: never start V/S
                else:
                    self.dist2vs[i] = -999.
               
                # VNAV spd mode: use speed of this waypoint as commaded speed
                # while passing waypoint and save next speed for passing next wp
                if self.swvnav[i] and self.actwpspd[i]>0.0: # check mode and value

                    # Select CAS or Mach command by checking value of actwpspd
                    if self.actwpspd[i]<2.0: # Mach command

                       self.aspd[i] = mach2cas(self.actwpspd[i],self.alt[i])
                       self.ama[i]  = self.actwpspd[i]                            

                    else:    # CAS command
                       self.aspd[i] = self.actwpspd[i]
                       self.ama[i]  = cas2tas(spd,self.alt[i])
                    
                
                if spd>0. and self.swlnav[i] and self.swvnav[i]: # Valid speed and LNAV and VNAV ap modes are on
                   self.actwpspd[i] = spd                           
                else:
                   self.actwpspd[i] = -999.

                # Calculate distance before waypoint where to start the turn
                # Turn radius:      R = V2 tan phi / g
                # Distance to turn: wpturn = R * tan (1/2 delhdg) but max 4 times radius
                # using default bank angle per flight phase
                turnrad = self.tas[i]*self.tas[i]/tan(self.bank[i]) /g0 /nm # [nm] 

                dy = (self.actwplat[i]-self.lat[i])
                dx = (self.actwplon[i]-self.lon[i])*self.coslat[i]
                qdr[i] = degrees(atan2(dx,dy))                    

                self.actwpturn[i] = self.actwpflyby[i]*                     \
                     max(3.,abs(turnrad*tan(radians(0.5*degto180(qdr[i]-    \
                     self.route[i].wpdirfrom[self.route[i].iactwp])))))  # [nm]                

            # End of Waypoint switching loop
            
            # Do VNAV start of descent check
            dy = (self.actwplat-self.lat)
            dx = (self.actwplon-self.lon)*self.coslat
            dist2wp = 60.*nm*np.sqrt(dx*dx+dy*dy)
            steepness = 3000.*ft/(10.*nm)

            # VNAV AP LOGIC
            self.swvnavvs = self.swlnav*self.swvnav*((dist2wp<self.dist2vs) + \
                                     (self.actwpalt>self.alt))            

            self.avs = (1-self.swvnavvs)*self.avs + self.swvnavvs*steepness*self.gs
            self.aalt = (1-self.swvnavvs)*self.aalt + self.swvnavvs*self.actwpalt

            # Set headings based on swlnav
            self.ahdg = np.where(self.swlnav, qdr, self.ahdg)

        #-------------END of FMS update -------------------
      
        # NOISE: Turbulence
        if self.turbulence:
            timescale=np.sqrt(simdt)
            trkrad=np.radians(self.trk)
            
            #write turbulences in array
            turb=np.array(self.standardturbulence)
            turb=np.where(turb>1e-6,turb,1e-6)
            
            #horizontal flight direction
            turbhf=np.random.normal(0,turb[0]*timescale,self.ntraf) #[m]
            
            #horizontal wing direction
            turbhw=np.random.normal(0,turb[1]*timescale,self.ntraf) #[m]
            
            #vertical direction
            turbalt=np.random.normal(0,turb[2]*timescale,self.ntraf) #[m]
            
            #latitudinal, longitudinal direction
            turblat=np.cos(trkrad)*turbhf-np.sin(trkrad)*turbhw #[m]
            turblon=np.sin(trkrad)*turbhf+np.cos(trkrad)*turbhw #[m]

        else:
            turbalt=np.zeros(self.ntraf) #[m]
            turblat=np.zeros(self.ntraf) #[m]
            turblon=np.zeros(self.ntraf) #[m]


        # ASAS AP switches

        #--------- Input to Autopilot settings to follow: destination or ASAS ----------

        # desired autopilot settings due to ASAS
        self.deshdg = self.asasactive*self.asashdg + (1-self.asasactive)*self.ahdg
        self.desspd = self.asasactive*self.asasspd + (1-self.asasactive)*self.aspd
        self.desalt = self.asasactive*self.asasalt + (1-self.asasactive)*self.aalt
        self.desvs  = self.asasactive*self.asasvsp + (1-self.asasactive)*self.avs

        # check for the flight envelope
        self.perf.limits()

        # Update autopilot settings with values within the flight envelope

        # Autopilot selected speed setting [m/s]
        # To do: add const Mach const CAS mode
        self.aspd = (self.lspd ==0)*self.desspd + (self.lspd!=0)*self.lspd

        # Autopilot selected altitude [m]
        self.aalt = (self.lalt ==0)*self.desalt + (self.lalt!=0)*self.lalt

        # Autopilot selected heading
        self.ahdg = self.deshdg

        # Autopilot selected vertical speed (V/S)
        self.avs = (self.lvs==0)*self.desvs + (self.lvs!=0)*self.lvs

        # below crossover altitude: CAS=const, above crossover altitude: MA = const
        #climb/descend above crossover: Ma = const, else CAS = const  
        #ama is fixed when above crossover
        check = self.abco*(self.ama == 0.)
        swma = np.where(check==True)
        self.ama[swma] = vcas2mach(self.aspd[swma], self.alt[swma])

        # ama is deleted when below crossover
        check2 = self.belco*(self.ama!=0.)
        swma2 = np.where(check2==True)
        self.ama[swma2] = 0. 

        #---------- Basic Autopilot  modes ----------

        # SPD HOLD/SEL mode: aspd = autopilot selected speed (first only eas)
        # for information:    

# no more ?       self.aptas = (self.actwpspd > 0.01)*self.actwpspd*self.swvnav + \
#                            np.logical_or((self.actwpspd <= 0.01),np.logical_not (self.swvnav))*self.aptas

        self.delspd = self.aptas - self.tas 
        swspdsel = np.abs(self.delspd) > 0.4  # <1 kts = 0.514444 m/s
        ax = np.minimum(abs(self.delspd / max(1e-8,simdt)), self.ax)

        self.tas = swspdsel * (self.tas + ax * np.sign(self.delspd) *  \
                                          simdt) + (1. - swspdsel) * self.aptas

        # Speed conversions
        self.cas = vtas2cas(self.tas, self.alt)
        self.gs  = self.tas
        self.M   = vtas2mach(self.tas, self.alt)

        # Update performance every self.perfdt seconds
        if abs(simt - self.perft0) >= self.perfdt:               
            self.perft0 = simt            
            self.perf.perf()

        # update altitude
        self.eps = np.array(self.ntraf * [0.01])  # almost zero for misc purposes
        swaltsel = np.abs(self.aalt-self.alt) >      \
                  np.maximum(3.,np.abs(2. * simdt * np.abs(self.vs))) # 3.[m] = 10 [ft] eps alt

        self.vs = swaltsel*np.sign(self.aalt-self.alt)*       \
                    ( (1-self.swvnav)*np.abs(1500./60.*ft) +    \
                      self.swvnav*np.abs(self.avs)         )

        self.alt = swaltsel * (self.alt + self.vs * simdt) +   \
                   (1. - swaltsel) * self.aalt + turbalt

        # HDG HOLD/SEL mode: ahdg = ap selected heading
        delhdg = (self.ahdg - self.trk + 180.) % 360 - 180.  # [deg]

        # omega = np.degrees(g0 * np.tan(self.aphi) / \
        # np.maximum(self.tas, self.eps))

        # nominal bank angles per phase from BADA 3.12
        omega = np.degrees(g0 * np.tan(self.bank) / \
                           np.maximum(self.tas, self.eps))

        self.hdgsel = np.abs(delhdg) > np.abs(2. * simdt * omega)

        self.trk = (self.trk + simdt * omega * self.hdgsel * np.sign(delhdg)) % 360.

        #--------- Kinematics: update lat,lon,alt ----------
        ds = simdt * self.gs

        self.lat = self.lat + np.degrees(ds * np.cos(np.radians(self.trk)+turblat) \
                                         / Rearth)

        self.coslat = np.cos(np.deg2rad(self.lat))

        self.lon = self.lon + np.degrees(ds * np.sin(np.radians(self.trk)+turblon) \
                                         / self.coslat / Rearth)

        # Update trails when switched on
        if self.swtrails:
            self.trails.update(simt, self.lat, self.lon,
                               self.lastlat, self.lastlon,
                               self.lasttim, self.id, self.trailcol)
        else:
            self.lastlat = self.lat
            self.lastlon = self.lon
            self.lasttim[:] = simt

        # ----------------AREA check----------------
        # Update area once per areadt seconds:
        if self.swarea and abs(simt - self.areat0) > self.areadt:
            # Update loop timer
            self.areat0 = simt
            # Check all aircraft
            i = 0
            while (i < self.ntraf):
                # Current status
                if self.area == "Square":
                    inside = self.arealat0 <= self.lat[i] <= self.arealat1 and \
                             self.arealon0 <= self.lon[i] <= self.arealon1 and \
                             self.alt[i] >= self.areafloor and \
                             (self.alt[i] >= 1500 or self.swtaxi)

                elif self.area == "Circle":

                    # delete aircraft if it is too far from the center of the circular area, or if has decended below the minimum altitude
                    distance = kwikdist(self.arealat0, self.arealon0, self.lat[i], self.lon[i])  # [NM]
                    inside = distance < self.arearadius and self.alt[i] >= self.areafloor

                # Compare with previous: when leaving area: delete command
                if self.inside[i] and not inside:
                    self.delete(self.id[i])

                else:
                    # Update area status
                    self.inside[i] = inside
                    i = i + 1

        return

    def id2idx(self, acid):
        """Find index of aircraft id"""
        try:
            return self.id.index(acid.upper())
        except:
            return -1

    def setTrails(self, *args):
        """ Set trails on/off, or change trail color of aircraft """
        if type(args[0]) == bool:
            # Set trails on/off
            self.swtrails = args[0]
            if len(args) > 1:
                self.trails.dt = args[1]
            if not self.swtrails:
                self.trails.clear()
        else:
            # Change trail color
            if len(args) < 2 or args[2] not in ["BLUE", "RED", "YELLOW"]:
                return False, "Set aircraft trail color with: TRAIL acid BLUE/RED/YELLOW"
            self.changeTrailColor(args[1], args[0])

    def changeTrailColor(self, color, idx):
        """Change color of aircraft trail"""
        self.trailcol[idx] = self.trails.colorList[color]
        return

    def setNoise(self, noiseflag=None):
        """Noise (turbulence, ADBS-transmission noise, ADSB-truncated effect)"""
        if noiseflag is None:
            return True, "Noise is currently " + ("on" if noiseflag else "off")

        self.noise              = noiseflag
        self.trunctime          = 1                   # seconds
        self.transerror         = [1, 100, 100 * ft]  # [degree,m,m] standard bearing, distance, altitude error
        self.standardturbulence = [0, 0.1, 0.1]       # m/s standard turbulence  (nonnegative)
        # in (horizontal flight direction, horizontal wing direction, vertical)

        self.turbulence     = self.noise
        self.ADSBtransnoise = self.noise
        self.ADSBtrunc      = self.noise

    def engchange(self, acid, engid):
        """Change of engines"""
        self.perf.engchange(acid, engid)
        return

    def selhdg(self, idx, hdg):  # HDG command
        """ Select heading command: HDG acid, hdg """
        # Give autopilot commands
        self.ahdg[idx]   = float(hdg)
        self.swlnav[idx] = False
        # Everything went ok!
        return True

    def selspd(self, idx, casmach):  # SPD command
        """ Select speed command: SPD acid, casmach (= CASkts/Mach) """
        # When >=1.0 it is probably CASkts else it is Mach
        if 0.1 < casmach < 1.0:
            self.aspd[idx] = mach2cas(casmach, self.alt[idx])  # Convert Mach to CAS m/s
            self.ama[idx]  = casmach
        else:
            self.aspd[idx] = casmach  # CAS m/s
            self.ama[idx]  = cas2mach(casmach, self.alt[idx])
        # Switch off VNAV: SPD command overrides
        self.swvnav[idx]   = False

        return True

    def move(self, idx, lat, lon, alt=None, hdg=None, casmach=None, vspd=None):
        self.lat[idx]      = lat
        self.lon[idx]      = lon

        if alt:
            self.alt[idx]  = alt
            self.aalt[idx] = alt

        if hdg:
            self.trk[idx]  = hdg
            self.ahdg[idx] = hdg

        if casmach:
            # Convert speed
            if 0.1 < casmach < 1.0:
                self.tas[idx]  = mach2tas(casmach, alt)
                self.aspd[idx] = mach2cas(casmach, alt)
            else:
                self.tas[idx]  = cas2tas(casmach, alt)
                self.aspd[idx] = casmach

        if vspd:
            self.vs[idx]       = vspd
            self.swvnav[idx]   = False

    def selalt(self, idx, alt, vspd=None):
        """ Select altitude command: ALT acid, alt, [vspd] """
        self.aalt[idx]    = alt
        self.afll[idx]    = alt / (100. * ft)
        self.swvnav[idx]  = False

        # Check for optional VS argument
        if vspd:
            self.avs[idx] = vspd
        else:
            delalt        = alt - self.alt[idx]
            # Check for VS with opposite sign => use default vs
            # by setting autopilot vs to zero
            if self.avs[idx] * delalt < 0. and abs(self.avs[idx]) > 0.01:
                self.avs[idx] = 0.

    def selvspd(self, idx, vspd):
        """ Vertical speed autopilot command: VS acid vspd """
        self.avs[idx] = vspd
        # self.vs[idx] = vspd
        self.swvnav[idx] = False

    def nom(self, idx):
        """ Reset acceleration back to nominal (1 kt/s^2): NOM acid """
        self.ax[idx] = kts

    def setTaxi(self, flag):
        """ Set taxi delete flag: OFF auto deletes traffic below 1500 ft """
        self.swtaxi = flag

    def setLNAV(self, idx, flag=None):
        """ Set LNAV on or off for a specific or for all aircraft """
        if idx is None:
            # All aircraft are targeted
            self.swlnav = np.array(self.ntraf*[flag])

        elif flag is None:
            return True, (self.id[idx] + ": LNAV is " + "ON" if self.swlnav[idx] else "OFF")

        elif flag:
            route = self.route[idx]
            if route.nwp > 0:
                self.swlnav[idx] = True
                route.direct(self, idx, route.wpname[route.findact(self, idx)])
            else:
                return False, ("LNAV " + self.id[idx] + ": no waypoints or destination specified")
        else:
            self.swlnav[idx] = False

    def setVNAV(self, idx, flag=None):
        """ Set VNAV on or off for a specific or for all aircraft """
        if idx is None:
            # All aircraft are targeted
            self.swvnav = np.array(self.ntraf*[flag])

        elif flag is None:
            return True, (self.id[idx] + ": VNAV is " + "ON" if self.swvnav[idx] else "OFF")

        elif flag:
            if not self.swlnav[idx]:
                return False, (self.id[idx] + ": VNAV ON requires LNAV to be ON")

            route = self.route[idx]
            if route.nwp > 0:
                self.swvnav[idx] = True
                route.direct(self, idx, route.wpname[route.findact(self, idx)])
            else:
                return False, ("VNAV " + self.id[idx] + ": no waypoints or destination specified")
        else:
            self.swvnav[idx] = False

    def setDestOrig(self, cmd, idx, *args):
        if len(args) == 0:
            if cmd == 'DEST':
                return True, ('DEST ' + self.id[idx] + ': ' + self.dest[idx])
            else:
                return True, ('ORIG ' + self.id[idx] + ': ' + self.orig[idx])

        route = self.route[idx]
        if len(args) == 1:
            name = args[0]
            apidx = self.navdb.getapidx(name)
            if apidx < 0:
                return False, (cmd + ": Airport " + name + " not found.")
            lat = self.navdb.aplat[apidx]
            lon = self.navdb.aplon[apidx]
        else:
            name = self.id[idx] + cmd
            lat, lon = args

        if cmd == "DEST":
            self.dest[idx] = name
            iwp = route.addwpt(self, idx, self.dest[idx], route.dest,
                               lat, lon, 0.0, self.cas[idx])
            # If only waypoint: activate
            if (iwp == 0) or (self.orig[idx] != "" and route.nwp == 2):
                self.actwplat[idx] = route.wplat[iwp]
                self.actwplon[idx] = route.wplon[iwp]
                self.actwpalt[idx] = route.wpalt[iwp]
                self.actwpspd[idx] = route.wpspd[iwp]

                self.swlnav[idx] = True
                route.iactwp = iwp

            # If not found, say so
            elif iwp < 0:
                return False, (self.dest[idx] + " not found.")

        # Origin: bookkeeping only for now
        else:
            self.orig[idx] = name
            iwp = route.addwpt(self, idx, self.orig[idx], route.orig,
                               self.lat[idx], self.lon[idx], 0.0, self.cas[idx])
            if iwp < 0:
                return False, (self.orig[idx] + " not found.")

    def acinfo(self, acid):
        idx      = self.id.index(acid)
        actype   = self.type[idx]
        lat, lon = self.lat[idx], self.lon[idx]
        alt, hdg = self.alt[idx], self.trk[idx]
        cas      = tas2cas(self.tas[idx], self.alt[idx]) / kts
        tas      = self.tas[idx] / kts
        route    = self.route[idx]
        line  = "Info on %s %s index = %d\n" % (acid, actype, idx) \
              + "Pos = %.2f, %.2f. Spd: %d kts CAS, %d kts TAS\n" % (lat, lon, cas, tas) \
              + "Alt = %d ft, Hdg = %d\n" % (alt, hdg)
        if self.swlnav[idx] and route.nwp > 0 and route.iactwp >= 0:
            if self.swvnav[idx]:
                line += "VNAV, "
            line += "LNAV to " + route.wpname[route.iactwp] + "\n"
        if self.orig[idx] != "" or self.dest[idx] != "":
            line += "Flying"
            if self.orig[idx] != "":
                line += " from " + self.orig[idx]
            if self.dest[idx] != "":
                line += " to " + self.dest[idx]

        return line

    def area(self, scr, metric, *args):
        if args[0] == 'OFF':
            self.swarea = False
            self.area   = ""
            scr.objappend(2, "AREA", None)  # delete square areas
            scr.objappend(3, "AREA", None)  # delete circle areas
            return True

        if type(args[0]) == float and len(args) >= 4:
            # This is a square area
            self.arealat0 = min(args[0], args[2])
            self.arealat1 = max(args[0], args[2])
            self.arealon0 = min(args[1], args[3])
            self.arealon1 = max(args[1], args[3])

            if numargs == 5:
                self.areafloor = args[4] * ft
            else:
                self.areafloor = -9999999.

            self.area = "Square"
            self.swarea = True
            scr.objappend(2, "AREA", [args[0], args[1], args[2], args[3]])

            # Avoid mass delete due to redefinition of area
            self.inside = self.ntraf * [False]
            return True
        elif args[0] == "FIR" and len(args) <= 3:
            for i in range(0, len(self.navdb.fir)):
                if args[1] == self.navdb.fir[i][0]:
                    break
            if args[1] != self.navdb.fir[i][0]:
                return False, "Unknown FIR, try again"

            metric.fir_number        = i
            metric.fir_circle_point  = metric.metric_Area.FIR_circle(self.navdb, metric.fir_number)
            metric.fir_circle_radius = float(args[1])

            if len(args) == 3:
                self.areafloor = args[2] * ft
            else:
                self.areafloor = -9999999.

            self.area   = "Circle"
            self.swarea = True
            self.inside = self.ntraf * [False]
            scr.objappend(3, "AREA", [metric.fir_circle_point[0] , metric.fir_circle_point[1], metric.fir_circle_radius])
            return True
        elif args[0] == "CIRCLE" and len(args) in [4, 5]:
            # draw circular experiment area
            self.arealat0 = args[1]    # Latitude of circle center [deg]
            self.arealon0 = args[2]    # Longitude of circle center [deg]
            self.arearadius = args[3]  # Radius of circle Center [NM]

            # Deleting traffic flying out of experiment area
            self.area = "Circle"
            self.swarea = True

            if len(args) == 5:
                self.areafloor = args[4] * ft  # [m]
            else:
                self.areafloor = -9999999.  # [m]

            # draw the circular experiment area on the radar gui
            scr.objappend(3, "AREA", [self.arealat0, self.arealon0, radius])

            # Avoid mass delete due to redefinition of area
            self.inside = self.ntraf * [False]

            return True

        return False
Exemplo n.º 2
0
class Traffic:
    """
    Traffic class definition    : Traffic data

    Methods:
        Traffic()            :  constructor

        create(acid,actype,aclat,aclon,achdg,acalt,acspd) : create aircraft
        delete(acid)         : delete an aircraft from traffic data
        update(sim)          : do a numerical integration step
        trafperf ()          : calculate aircraft performance parameters

    Members: see create

    Created by  : Jacco M. Hoekstra
    """

    def __init__(self, navdb):

        self.reset(navdb)
        return

    def reset(self, navdb):
        self.dts = []
        self.ntraf = 0

        #  model-specific parameters.
        # Default: BlueSky internal performance model.
        # Insert your BADA files to the folder "BlueSky/data/coefficients/BADA"
        # for working with EUROCONTROL`s Base of Aircraft Data revision 3.12

        self.perf = Perf(self)

        self.dts = []

        self.ntraf = 0

        # Create datalog instance
        self.log = Datalog()

        # Traffic list & arrays definition

        # !!!IMPORTANT NOTE!!!
        # Any variables added here should also be added in the Traffic
        # methods self.create() (append) and self.delete() (delete)
        # which can be found directly below __init__

        # Traffic basic flight data

        # Traffic basic flight data
        self.id = []  # identifier (string)
        self.type = []  # aircaft type (string)
        self.lat = np.array([])  # latitude [deg]
        self.lon = np.array([])  # longitude [deg]
        self.trk = np.array([])  # track angle [deg]
        self.tas = np.array([])  # true airspeed [m/s]
        self.gs = np.array([])  # ground speed [m/s]
        self.cas = np.array([])  # callibrated airspeed [m/s]
        self.M = np.array([])  # mach number
        self.alt = np.array([])  # altitude [m]
        self.fll = np.array([])  # flight level [ft/100]
        self.vs = np.array([])  # vertical speed [m/s]
        self.rho = np.array([])  # atmospheric air density [m/s]
        self.temp = np.array([])  # atmospheric air temperature [K]
        self.dtemp = np.array([])  # delta t for non-ISA conditions

        # Traffic performance data
        self.avsdef = np.array([])  # [m/s]default vertical speed of autopilot
        self.aphi = np.array([])  # [rad] bank angle setting of autopilot
        self.ax = np.array(
            [])  # [m/s2] absolute value of longitudinal accelleration
        self.bank = np.array([])  # nominal bank angle, [radian]
        self.bphase = np.array([])  # standard bank angles per phase
        self.hdgsel = np.array([])  # determines whether aircraft is turning

        # Crossover altitude
        self.abco = np.array([])
        self.belco = np.array([])

        # Traffic autopilot settings
        self.ahdg = []  # selected heading [deg]
        self.aspd = []  # selected spd(eas) [m/s]
        self.aptas = []  # just for initializing
        self.ama = []  # selected spd above crossover altitude (Mach) [-]
        self.aalt = []  # selected alt[m]
        self.afll = []  # selected fl [ft/100]
        self.avs = []  # selected vertical speed [m/s]

        # limit settings
        self.lspd = []  # limit speed
        self.lalt = []  # limit altitude
        self.lvs = []  # limit vertical speed due to thrust limitation

        # Traffic navigation information
        self.orig = []  # Four letter code of origin airport
        self.dest = []  # Four letter code of destination airport

        # LNAV route navigation
        self.swlnav = np.array([])  # Lateral (HDG) based on nav?
        self.swvnav = np.array(
            [])  # Vertical/longitudinal (ALT+SPD) based on nav info

        self.actwplat = np.array([])  # Active WP latitude
        self.actwplon = np.array([])  # Active WP longitude
        self.actwpalt = np.array([])  # Active WP altitude to arrive at
        self.actwpspd = np.array([])  # Active WP speed
        self.actwpturn = np.array([])  # Distance when to turn to next waypoint

        # VNAV cruise level
        self.crzalt = np.array([])  # Cruise altitude[m]

        # Route info
        self.route = []

        # ASAS info per aircraft:
        self.iconf = []  # index in 'conflicting' aircraft database
        self.asasactive = np.array(
            [])  # whether the autopilot follows ASAS or not
        self.asashdg = np.array([])  # heading provided by the ASAS [deg]
        self.asasspd = np.array([])  # speed provided by the ASAS (eas) [m/s]
        self.asasalt = np.array([])  # speed alt by the ASAS [m]
        self.asasvsp = np.array([])  # speed vspeed by the ASAS [m/s]

        self.desalt = np.array([])  #desired altitude [m]
        self.deshdg = np.array([])  #desired heading
        self.desvs = np.array([])  #desired vertical speed [m/s]
        self.desspd = np.array([])  #desired speed [m/s]

        # Display information on label
        self.label = []  # Text and bitmap of traffic label
        self.trailcol = []  # Trail color: default 'Blue'

        # Transmitted data to other aircraft due to truncated effect
        self.adsbtime = np.array([])
        self.adsblat = np.array([])
        self.adsblon = np.array([])
        self.adsbalt = np.array([])
        self.adsbtrk = np.array([])
        self.adsbtas = np.array([])
        self.adsbgs = np.array([])
        self.adsbvs = np.array([])

        self.inconflict = np.array([], dtype=bool)

        #-----------------------------------------------------------------------------
        # Not per aircraft data

        # Scheduling of FMS and ASAS
        self.t0fms = -999.  # last time fms was called
        self.dtfms = 1.01  # interval for fms

        self.t0asas = -999.  # last time ASAS was called
        self.dtasas = 1.00  # interval for ASAS

        # Flight performance scheduling
        self.perfdt = 0.1  # [s] update interval of performance limits
        self.perft0 = -self.perfdt  # [s] last time checked (in terms of simt)
        self.warned2 = False  # Flag: Did we warn for default engine parameters yet?

        # ADS-B transmission-receiver model
        self.adsb = ADSBModel(self)

        # ASAS objects: Conflict Database
        self.dbconf = Dbconf(self, 300., 5. * nm,
                             1000. * ft)  # hard coded values to be replaced

        # Import navigation data base
        self.navdb = navdb

        # Traffic area: delete traffic when it leaves this area (so not when outside)
        self.swarea = False
        self.arealat0 = 0.0  # [deg] lower latitude defining area
        self.arealat1 = 0.0  # [deg] upper latitude defining area
        self.arealat0 = 0.0  # [deg] lower longitude defining area
        self.arealat1 = 0.0  # [deg] upper longitude defining area
        self.areafloor = -999999.0  # [m] Delete when descending through this h
        self.areadt = 5.0  # [s] frequency of area check (simtime)
        self.areat0 = -100.  # last time checked

        self.inside = []
        self.fir_circle_point = (0.0, 0.0)
        self.fir_circle_radius = 1.0

        # Taxi switch
        self.swtaxi = False  # Default OFF: delete traffic below 1500 ft

        # Research Area ("Square" for Square, "Circle" for Circle area)
        self.area = ""

        # Bread crumbs for trails
        self.lastlat = []
        self.lastlon = []
        self.lasttim = []
        self.trails = Trails()
        self.swtrails = False  # Default switched off

        # ADS-B Coverage area
        self.swAdsbCoverage = False

        # Noise (turbulence, ADBS-transmission noise, ADSB-truncated effect)
        self.setNoise(False)

        self.eps = np.array([])

        return

    def create_ac(self, acid, actype, aclat, aclon, achdg, acalt, acspd):
        """Create an aircraft"""
        # Check if not already exist
        if self.id.count(acid.upper()) > 0:
            return False  # already exists do nothing

        # Increase number of aircraft
        self.ntraf = self.ntraf + 1

        # Process input
        self.id.append(acid.upper())
        self.type.append(actype)
        self.lat = np.append(self.lat, aclat)
        self.lon = np.append(self.lon, aclon)
        self.trk = np.append(self.trk, achdg)  # TBD: add conversion hdg => trk
        self.alt = np.append(self.alt, acalt)
        self.fll = np.append(self.fll, (acalt) / 100)
        self.vs = np.append(self.vs, 0.)
        self.rho = np.append(self.rho, density(acalt))
        self.temp = np.append(self.temp, temp(acalt))
        self.dtemp = np.append(self.dtemp,
                               0)  # at the moment just ISA conditions
        self.tas = np.append(self.tas, acspd)
        self.gs = np.append(self.gs, acspd)
        self.cas = np.append(self.cas, tas2cas(acspd, acalt))
        self.M = np.append(self.M, tas2mach(acspd, acalt))

        # AC is initialized with neutral max bank angle
        self.bank = np.append(self.bank, 25.)
        if self.ntraf < 2:
            self.bphase = np.deg2rad(np.array([15, 35, 35, 35, 15, 45]))
        self.hdgsel = np.append(self.hdgsel, False)

        #------------------------------Performance data--------------------------------
        # Type specific data
        #(temporarily default values)
        self.avsdef = np.append(
            self.avsdef, 1500. * fpm)  # default vertical speed of autopilot
        self.aphi = np.append(self.aphi,
                              radians(25.))  # bank angle setting of autopilot
        self.ax = np.append(
            self.ax, kts)  # absolute value of longitudinal accelleration

        # Crossover altitude
        self.abco = np.append(self.abco, 0)
        self.belco = np.append(self.belco, 1)

        # performance data
        self.perf.create(actype)

        # Traffic autopilot settings: hdg[deg], spd (CAS,m/s), alt[m], vspd[m/s]
        self.ahdg = np.append(self.ahdg, achdg)  # selected heading [deg]
        self.aspd = np.append(self.aspd,
                              tas2eas(acspd, acalt))  # selected spd(eas) [m/s]
        self.aptas = np.append(self.aptas, vcas2tas(self.aspd,
                                                    self.alt))  # [m/s]
        self.ama = np.append(self.ama,
                             0.)  # selected spd above crossover (Mach) [-]
        self.aalt = np.append(self.aalt, acalt)  # selected alt[m]
        self.afll = np.append(self.afll, (acalt / 100))  # selected fl[ft/100]
        self.avs = np.append(self.avs, 0.)  # selected vertical speed [m/s]

        # limit settings: initialize with 0
        self.lspd = np.append(self.lspd, 0.0)
        self.lalt = np.append(self.lalt, 0.0)
        self.lvs = np.append(self.lvs, 0.0)

        # Traffic navigation information
        self.dest.append("")
        self.orig.append("")

        # LNAV route navigation
        self.swlnav = np.append(self.swlnav,
                                False)  # Lateral (HDG) based on nav
        self.swvnav = np.append(
            self.swvnav,
            False)  # Vertical/longitudinal (ALT+SPD) based on nav info

        self.actwplat = np.append(self.actwplat, 89.99)  # Active WP latitude
        self.actwplon = np.append(self.actwplon, 0.0)  # Active WP longitude
        self.actwpalt = np.append(self.actwpalt, 0.0)  # Active WP altitude
        self.actwpspd = np.append(self.actwpspd, -999.)  # Active WP speed
        self.actwpturn = np.append(
            self.actwpturn, 1.0)  # Distance to active waypoint where to turn

        # VNAV cruise level
        self.crzalt = np.append(self.crzalt,
                                -999.)  # Cruise altitude[m] <0=None

        # Route info
        self.route.append(Route(
            self.navdb))  # create empty route connected with nav databse

        # ASAS info: no conflict => -1
        self.iconf.append(-1)  # index in 'conflicting' aircraft database
        self.asasactive = np.append(self.asasactive, False)
        self.asashdg = np.append(self.asashdg, achdg)
        self.asasspd = np.append(self.asasspd, tas2eas(acspd, acalt))
        self.asasalt = np.append(self.asasalt, acalt)
        self.asasvsp = np.append(self.asasvsp, 0.)

        # Area variable set to False to avoid deletion upon creation outside
        self.inside.append(False)

        # Display information on label
        self.label.append(['', '', '', 0])

        # Bread crumbs for trails
        self.trailcol.append(self.trails.defcolor)
        self.lastlat = np.append(self.lastlat, aclat)
        self.lastlon = np.append(self.lastlon, aclon)
        self.lasttim = np.append(self.lasttim, 0.0)

        # ADS-B Coverage area
        self.swAdsbCoverage = False

        # Transmitted data to other aircraft due to truncated effect
        self.adsbtime = np.append(self.adsbtime,
                                  np.random.rand(self.trunctime))
        self.adsblat = np.append(self.adsblat, aclat)
        self.adsblon = np.append(self.adsblon, aclon)
        self.adsbalt = np.append(self.adsbalt, acalt)
        self.adsbtrk = np.append(self.adsbtrk, achdg)
        self.adsbtas = np.append(self.adsbtas, acspd)
        self.adsbgs = np.append(self.adsbgs, acspd)
        self.adsbvs = np.append(self.adsbvs, 0.)

        self.inconflict = np.append(self.inconflict, False)

        self.eps = np.append(self.eps, 0.01)

        return True

    def delete(self, acid):
        """Delete an aircraft"""

        try:  # prevent error due to not found
            idx = self.id.index(acid)
        except:
            return False

        del self.id[idx]
        del self.type[idx]

        # Traffic basic data
        self.lat = np.delete(self.lat, idx)
        self.lon = np.delete(self.lon, idx)
        self.trk = np.delete(self.trk, idx)
        self.alt = np.delete(self.alt, idx)
        self.fll = np.delete(self.fll, idx)
        self.vs = np.delete(self.vs, idx)
        self.tas = np.delete(self.tas, idx)
        self.gs = np.delete(self.gs, idx)
        self.cas = np.delete(self.cas, idx)
        self.M = np.delete(self.M, idx)
        self.T = np.delete(self.T, idx)
        self.p = np.delete(self.p, idx)
        self.rho = np.delete(self.rho, idx)
        self.temp = np.delete(self.temp, idx)
        self.dtemp = np.delete(self.dtemp, idx)

        self.hdgsel = np.delete(self.hdgsel, idx)
        self.bank = np.delete(self.bank, idx)

        # Crossover altitude
        self.abco = np.delete(self.abco, idx)
        self.belco = np.delete(self.belco, idx)

        # Type specific data (temporarily default values)
        self.avsdef = np.delete(self.avsdef, idx)
        self.aphi = np.delete(self.aphi, idx)
        self.ax = np.delete(self.ax, idx)

        # performance data
        self.perf.delete(idx)

        # Traffic autopilot settings: hdg[deg], spd (CAS,m/s), alt[m], vspd[m/s]
        self.ahdg = np.delete(self.ahdg, idx)
        self.aspd = np.delete(self.aspd, idx)
        self.ama = np.delete(self.ama, idx)
        self.aptas = np.delete(self.aptas, idx)
        self.aalt = np.delete(self.aalt, idx)
        self.afll = np.delete(self.afll, idx)
        self.avs = np.delete(self.avs, idx)

        # limit settings
        self.lspd = np.delete(self.lspd, idx)
        self.lalt = np.delete(self.lalt, idx)
        self.lvs = np.delete(self.lvs, idx)

        # Traffic navigation variables
        del self.dest[idx]
        del self.orig[idx]

        self.swlnav = np.delete(self.swlnav, idx)
        self.swvnav = np.delete(self.swvnav, idx)

        self.actwplat = np.delete(self.actwplat, idx)
        self.actwplon = np.delete(self.actwplon, idx)
        self.actwpalt = np.delete(self.actwpalt, idx)
        self.actwpspd = np.delete(self.actwpspd, idx)
        self.actwpturn = np.delete(self.actwpturn, idx)

        # VNAV cruise level
        self.crzalt = np.delete(self.crzalt, idx)

        # Route info
        del self.route[idx]

        # ASAS info
        del self.iconf[idx]
        self.asasactive = np.delete(self.asasactive, idx)
        self.asashdg = np.delete(self.asashdg, idx)
        self.asasspd = np.delete(self.asasspd, idx)
        self.asasalt = np.delete(self.asasalt, idx)
        self.asasvsp = np.delete(self.asasvsp, idx)

        self.desalt = np.delete(self.desalt, idx)
        self.desvs = np.delete(self.desvs, idx)
        self.desspd = np.delete(self.desspd, idx)
        self.deshdg = np.delete(self.deshdg, idx)

        # Metrics, area
        del self.inside[idx]

        # Traffic display data: label
        del self.label[idx]

        # Delete bread crumb data
        self.lastlat = np.delete(self.lastlat, idx)
        self.lastlon = np.delete(self.lastlon, idx)
        self.lasttim = np.delete(self.lasttim, idx)
        del self.trailcol[idx]

        # Transmitted data to other aircraft due to truncated effect
        self.adsbtime = np.delete(self.adsbtime, idx)
        self.adsblat = np.delete(self.adsblat, idx)
        self.adsblon = np.delete(self.adsblon, idx)
        self.adsbalt = np.delete(self.adsbalt, idx)
        self.adsbtrk = np.delete(self.adsbtrk, idx)
        self.adsbtas = np.delete(self.adsbtas, idx)
        self.adsbgs = np.delete(self.adsbgs, idx)
        self.adsbvs = np.delete(self.adsbvs, idx)

        self.inconflict = np.delete(self.inconflict, idx)

        # Decrease number fo aircraft
        self.ntraf = self.ntraf - 1

        self.eps = np.delete(self.eps, idx)
        return True

    def deleteall(self):
        """Clear traffic buffer"""
        ndel = self.ntraf
        for i in range(ndel):
            self.delete(self.id[-1])
        self.ntraf = 0
        self.dbconf.reset()
        self.perf.reset()
        return

    def update(self, simt, simdt):
        #        i = self.id2idx("TP233")
        #        if i>=0:
        #           print "LNAV TP233:",self.swlnav[i]
        # Update only necessary if there is traffic
        if self.ntraf == 0:
            return

        self.dts.append(simdt)

        #---------------- Atmosphere ----------------
        self.T, self.rho, self.p = vatmos(self.alt)

        #-------------- Performance limits autopilot settings --------------
        # Check difference with AP settings for trafperf and autopilot
        self.delalt = self.aalt - self.alt  # [m]

        # below crossover altitude: CAS=const, above crossover altitude: MA = const
        # aptas hast to be calculated before delspd
        self.aptas = vcas2tas(self.aspd, self.alt) * self.belco + vmach2tas(
            self.ama, self.alt) * self.abco
        self.delspd = self.aptas - self.tas

        ###############################################################################
        # Debugging: add 10000 random aircraft
        #            if simt>1.0 and self.ntraf<1000:
        #                for i in range(10000):
        #                   acid="KL"+str(i)
        #                   aclat = random.random()*180.-90.
        #                   aclon = random.random()*360.-180.
        #                   achdg = random.random()*360.
        #                   acalt = (random.random()*18000.+2000.)*0.3048
        #                   self.create(acid,'B747',aclat,aclon,achdg,acalt,350.)
        #
        #################################################################################

        #-------------------- ADSB update: --------------------

        self.adsbtime = self.adsbtime + simdt
        if self.ADSBtrunc:
            ADSB_update = np.where(self.adsbtime > self.trunctime)
        else:
            ADSB_update = range(self.ntraf)

        for i in ADSB_update:
            self.adsbtime[i] = self.adsbtime[i] - self.trunctime
            self.adsblat[i] = self.lat[i]
            self.adsblon[i] = self.lon[i]
            self.adsbalt[i] = self.alt[i]
            self.adsbtrk[i] = self.trk[i]
            self.adsbtas[i] = self.tas[i]
            self.adsbgs[i] = self.gs[i]
            self.adsbvs[i] = self.vs[i]

        # New version ADSB Model
        self.adsb.update()

        #------------------- ASAS update: ---------------------
        # Scheduling: when dt has passed or restart:
        if self.t0asas+self.dtasas<simt or simt<self.t0asas \
            and self.dbconf.swasas:
            self.t0asas = simt

            # Save old result
            iconf0 = np.array(self.iconf)

            # Call with traffic database and sim data
            self.dbconf.detect()
            self.dbconf.conflictlist(simt)
            self.dbconf.APorASAS()
            self.dbconf.resolve()

            # Reset label because of colour change
            chnged = np.where(iconf0 != np.array(self.iconf))[0]
            for i in chnged:
                self.label[i] = [" ", " ", "", " "]

        #-----------------  FMS GUIDANCE & NAVIGATION  ------------------
        # Scheduling: when dt has passed or restart:
        if self.t0fms + self.dtfms < simt or simt < self.t0fms:
            self.t0fms = simt

            # FMS LNAV mode:

            qdr, dist = qdrdist(self.lat, self.lon, self.actwplat,
                                self.actwplon)  #[deg][nm]

            # Check whether shift based dist [nm] is required, set closer than WP turn distance

            iwpclose = np.where(self.swlnav * (dist < self.actwpturn))[0]

            # Shift for aircraft i where necessary

            for i in iwpclose:

                # Get next wp (lnavon = False if no more waypoints)

                lat, lon, alt, spd, xtoalt, toalt, lnavon =  \
                       self.route[i].getnextwp()  # note: xtoalt,toalt in [m]

                # End of route/no more waypoints: switch off LNAV

                if not lnavon:
                    self.swlnav[i] = False  # Drop LNAV at end of route

            # In case of no LNAV, do not allow VNAV mode on it sown

                if not self.swlnav[i]:
                    self.swvnav[i] = False

                self.actwplat[i] = lat
                self.actwplon[i] = lon

                # User entered altitude

                if alt >= 0.:
                    self.actwpalt[i] = alt

                # VNAV calculated altitude is available and active

                if toalt >= 0. and self.swvnav[i]:
                    # Descent VNAV mode (T/D logic)

                    if self.alt[
                            i] > toalt + 10. * ft:  # Descent part is in this range of waypoints:

                        # Flat earth distance to next wp
                        dy = (lat - self.lat[i])
                        dx = (lon - self.lon[i]) * cos(radians(lat))
                        dist2wp = 60. * nm * sqrt(dx * dx + dy * dy)

                        steepness = 3000. * ft / (
                            10. * nm)  # 1:3 rule of thumb for now
                        maxaltwp = toalt + xtoalt * steepness  # max allowed altitude at next wp
                        self.actwpalt[i] = min(
                            self.alt[i],
                            maxaltwp)  #To descend now or descend later?

                        if maxaltwp < self.alt[
                                i]:  # if descent is necessary with maximum steepness

                            self.aalt[i] = self.actwpalt[
                                i]  # dial in altitude of next waypoint as calculated

                            t2go = max(0.1, dist2wp) / max(0.01, self.gs[i])
                            self.avs[i] = (
                                self.actwpalt[i] - self.alt[i]) / t2go

                        else:
                            print "else 1"
                            pass  # TBD

                    # Climb VNAV mode: climb as soon as possible (T/C logic)

                    elif self.swvnav[i] and self.alt[i] < toalt - 10. * ft:

                        # Flat earth distance to next wp

                        dy = (lat - self.lat[i])
                        dx = (lon - self.lon[i]) * cos(radians(lat))
                        dist2wp = 60. * nm * sqrt(dx * dx + dy * dy)

                        self.aalt[i] = self.actwpalt[
                            i]  # dial in altitude of next waypoint as calculated

                        t2go = max(0.1, dist2wp) / max(0.01, self.gs[i])
                        self.avs[i] = (self.actwpalt[i] - self.alt[i]) / t2go

                if spd > 0. and lnavon and self.swvnav[i]:
                    if spd < 2.0:
                        self.actwpspd[i] = mach2cas(spd, self.alt[i])
                    else:
                        self.actwpspd[i] = cas2tas(spd, self.alt[i])
                else:
                    self.actwpspd[i] = -999.

                # Calculate distance before waypoint where to start the turn
                # Turn radius:      R = V2 tan phi / g
                # Distance to turn: wpturn = R * tan (1/2 delhdg) but max 4 times radius
                turnrad = self.tas[i] * self.tas[i] / tan(
                    self.bank[i]
                ) / g0 / nm  # [nm] default bank angle per flight phase
                #                    print turnrad
                dy = (self.actwplat[i] - self.lat[i])
                dx = (self.actwplon[i] - self.lon[i]) * cos(
                    radians(self.lat[i]))
                qdr[i] = degrees(atan2(dx, dy))
                self.actwpturn[i] = max(3.,abs(turnrad*tan(radians(0.5*degto180(qdr[i]- \
                     self.route[i].wpdirfrom[self.route[i].iactwp])))))  # [nm]

            # Set headings based on swlnav
            self.ahdg = np.where(self.swlnav, qdr, self.ahdg)

        # NOISE: Turbulence
        if self.turbulence:
            timescale = np.sqrt(simdt)
            trkrad = np.radians(self.trk)

            #write turbulences in array
            turb = np.array(self.standardturbulence)
            turb = np.where(turb > 1e-6, turb, 1e-6)

            #horizontal flight direction
            turbhf = np.random.normal(0, turb[0] * timescale, self.ntraf)  #[m]

            #horizontal wing direction
            turbhw = np.random.normal(0, turb[1] * timescale, self.ntraf)  #[m]

            #vertical direction
            turbalt = np.random.normal(0, turb[2] * timescale,
                                       self.ntraf)  #[m]

            #latitudinal, longitudinal direction
            turblat = np.cos(trkrad) * turbhf - np.sin(trkrad) * turbhw  #[m]
            turblon = np.sin(trkrad) * turbhf + np.cos(trkrad) * turbhw  #[m]

        else:
            turbalt = np.zeros(self.ntraf)  #[m]
            turblat = np.zeros(self.ntraf)  #[m]
            turblon = np.zeros(self.ntraf)  #[m]

        # ASAS AP switches
        #--------- Select Autopilot settings to follow: destination or ASAS ----------

        # desired autopilot settings due to ASAS
        self.deshdg = self.asasactive * self.asashdg + (
            1 - self.asasactive) * self.ahdg
        self.desspd = self.asasactive * self.asasspd + (
            1 - self.asasactive) * self.aspd
        self.desalt = self.asasactive * self.asasalt + (
            1 - self.asasactive) * self.aalt
        self.desvs = self.asasactive * self.asasvsp + (
            1 - self.asasactive) * self.avs

        # check for the flight envelope
        self.perf.limits()

        # update autopilot settings with values within the flight envelope
        # speed
        self.aspd = (self.lspd == 0) * self.desspd + (self.lspd !=
                                                      0) * self.lspd
        # altitude
        self.aalt = (self.lalt == 0) * self.desalt + (self.lalt !=
                                                      0) * self.lalt
        # hdg
        self.ahdg = self.deshdg
        # vs
        self.avs = (self.lvs == 0) * self.desvs + (self.lvs != 0) * self.lvs

        # below crossover altitude: CAS=const, above crossover altitude: MA = const
        #climb/descend above crossover: Ma = const, else CAS = const
        #ama is fixed when above crossover
        check = self.abco * (self.ama == 0.)
        swma = np.where(check == True)
        self.ama[swma] = cas2mach(self.aspd[swma], self.alt[swma])
        # ama is deleted when below crossover
        check2 = self.belco * (self.ama != 0.)
        swma2 = np.where(check2 == True)
        self.ama[swma2] = 0.

        #---------- Basic Autopilot  modes ----------

        # SPD HOLD/SEL mode: aspd = autopilot selected speed (first only eas)
        # for information:
        self.aptas = (self.actwpspd>0.)*self.actwpspd + \
                                  (self.actwpspd<=0.)*self.aptas
        self.delspd = self.aptas - self.tas
        swspdsel = np.abs(self.delspd) > 0.4  # <1 kts = 0.514444 m/s
        ax = np.minimum(abs(self.delspd / max(1e-8, simdt)), self.ax)
        self.tas = swspdsel * (self.tas + ax * np.sign(self.delspd) *  \
                                          simdt) + (1. - swspdsel) * self.aptas

        # print "DELSPD", self.delspd/simdt, "AX", self.ax, "SELECTED", ax
        # without that part: non-accelerating ac would have TAS = 0
        # print "1-sw", (1. - swspdsel) * self.aptas
        # print "NEW TAS", self.tas

        # Speed conversions
        self.cas = vtas2cas(self.tas, self.alt)
        self.gs = self.tas
        self.M = vtas2mach(self.tas, self.alt)

        # Update performance every self.perfdt seconds
        if abs(simt - self.perft0) >= self.perfdt:
            self.perft0 = simt
            self.perf.perf()

        # update altitude
        self.eps = np.array(
            self.ntraf * [0.01])  # almost zero for misc purposes
        swaltsel = np.abs(self.aalt-self.alt) >      \
                  np.maximum(3.,np.abs(2. * simdt * np.abs(self.vs))) # 3.[m] = 10 [ft] eps alt
        #        print swaltsel

        self.vs = swaltsel*np.sign(self.aalt-self.alt)*       \
                    ( (1-self.swvnav)*np.abs(1500./60.*ft) +    \
                      self.swvnav*np.abs(self.avs)         )

        self.alt = swaltsel * (self.alt + self.vs * simdt) +   \
                   (1. - swaltsel) * self.aalt + turbalt

        # HDG HOLD/SEL mode: ahdg = ap selected heading
        delhdg = (self.ahdg - self.trk + 180.) % 360 - 180.  #[deg]

        # print delhdg
        # omega = np.degrees(g0 * np.tan(self.aphi) / \
        # np.maximum(self.tas, self.eps))

        # nominal bank angles per phase from BADA 3.12
        omega = np.degrees(g0 * np.tan(self.bank) / \
                           np.maximum(self.tas, self.eps))

        self.hdgsel = np.abs(delhdg) > np.abs(2. * simdt * omega)

        self.trk = (
            self.trk + simdt * omega * self.hdgsel * np.sign(delhdg)) % 360.

        #--------- Kinematics: update lat,lon,alt ----------
        ds = simdt * self.gs

        self.lat = self.lat + np.degrees(ds * np.cos(np.radians(self.trk)+turblat) \
                                         / Rearth)

        self.lon = self.lon + np.degrees(ds * np.sin(np.radians(self.trk)+turblon) \
                                         / np.cos(np.radians(self.lat)) / Rearth)

        # Update trails when switched on
        if self.swtrails:
            self.trails.update(simt, self.lat, self.lon, self.lastlat,
                               self.lastlon, self.lasttim, self.id,
                               self.trailcol)
        else:
            self.lastlat = self.lat
            self.lastlon = self.lon
            self.lattime = simt

        # ----------------AREA check----------------
        # Update area once per areadt seconds:
        if self.swarea and abs(simt - self.areat0) > self.areadt:
            # Update loop timer
            self.areat0 = simt
            # Check all aircraft
            i = 0
            while (i < self.ntraf):
                # Current status
                if self.area == "Square":
                    inside = self.arealat0 <= self.lat[i] <= self.arealat1 and \
                             self.arealon0 <= self.lon[i] <= self.arealon1 and \
                             self.alt[i] >= self.areafloor and \
                             (self.alt[i] >= 1500 or self.swtaxi)
                elif self.area == "Circle":
                    pass
                    ## Average of lat
                    latavg = (radians(self.lat[i]) + radians(
                        self.fir_circle_point[0])) / 2
                    cosdlat = (cos(latavg))

                    # Distance x to centroid
                    dx = (
                        self.lon[i] - self.fir_circle_point[1]) * cosdlat * 60
                    dx2 = dx * dx

                    # Distance y to centroid
                    dy = self.lat[i] - self.fir_circle_point[0]
                    dy2 = dy * dy * 3600

                    # Radius squared
                    r2 = self.fir_circle_radius * self.fir_circle_radius

                    # Inside if smaller
                    inside = (dx2 + dy2) < r2

                # Compare with previous: when leaving area: delete command

                if self.inside[i] and not inside:
                    self.delete(self.id[i])

                else:
                    # Update area status
                    self.inside[i] = inside
                    i = i + 1

        return

    def id2idx(self, acid):
        """Find index of aircraft id"""
        try:
            return self.id.index(acid.upper())
        except:
            return -1

    def changeTrailColor(self, color, idx):
        """Change color of aircraft trail"""
        # print color
        # print idx
        # print "     " + str(self.trails.colorsOfAC[idx])
        self.trailcol[idx] = self.trails.colorList[color]
        # print "     " + str(self.trails.colorsOfAC[idx])
        return

    def setNoise(self, A):
        """Noise (turbulence, ADBS-transmission noise, ADSB-truncated effect)"""
        self.noise = A
        self.trunctime = 1  # seconds
        self.transerror = [
            1, 100, 100 * ft
        ]  #[degree,m,m] standard bearing, distance, altitude error
        self.standardturbulence = [0, 0.1, 0.1
                                   ]  #m/s standard turbulence  (nonnegative)
        # in (horizontal flight direction, horizontal wing direction, vertical)

        self.turbulence = self.noise
        self.ADSBtransnoise = self.noise
        self.ADSBtrunc = self.noise

    def engchange(self, acid, engid):
        """Change of engines"""
        self.perf.engchange(acid, engid)
        return

    def create(self, arglist):  # CRE command

        if len(arglist) < 7:
            return False

        acid = arglist[0]

        if self.id.count(acid.upper()) > 0:
            return False, acid + " already exists"

        actype = arglist[1]
        aclat = arglist[2]
        aclon = arglist[3]
        achdg = arglist[4]
        acalt = arglist[5]  # m
        cmdspd = arglist[6]  # Mach/IAS kts (float

        if 0.1 < cmdspd < 1.0:
            acspd = mach2tas(cmdspd, acalt)
        else:
            acspd = cas2tas(cmdspd * kts, acalt)

        sw = self.create_ac(acid, actype, aclat, aclon, achdg, acalt, acspd)
        return sw

    def selhdg(self, arglist):  # HDG command

        # Select heading command: HDG acid, hdg

        if len(arglist) < 2:
            return False  #Error/Display helptext
        print "en voorbij de check"
        # unwrap arguments
        idx = arglist[0]  # aircraft index
        hdg = arglist[1]  # float

        # Give autopilot commands
        self.ahdg[idx] = hdg
        self.swlnav[idx] = False
        # Everything went ok!
        return True