def set_voltage(voltage, base_atten=self.pspl_base_attenuation):
# Calculate the voltage controller attenuator setting
amplitude = 7.5 * np.power(10, -base_atten / 20.0)
vc_atten = abs(20.0 * np.log10(
abs(voltage) / 7.5)) - base_atten - self.circuit_attenuation
if vc_atten <= self.atten.minimum_atten():
base_atten -= 1
if base_atten < 0:
logger.error(
"Voltage controlled attenuation {} under range, PSPL at Max. Decrease circuit attenuation."
.format(vc_atten))
raise ValueError(
"Voltage controlled attenuation {} under range, PSPL at Max. Decrease circuit attenuation."
.format(vc_atten))
set_voltage(voltage, base_atten=base_atten)
return
if self.atten.maximum_atten() < vc_atten:
base_atten += 1
if base_atten > 80:
logger.error(
"Voltage controlled attenuation {} over range, PSPL at Min. Increase circuit attenuation."
.format(vc_atten))
raise ValueError(
"Voltage controlled attenuation {} over range, PSPL at Min. Increase circuit attenuation."
.format(vc_atten))
set_voltage(voltage, base_atten=base_atten)
return
#print("PSPL Amplitude: {}, Attenuator: {}".format(amplitude,vc_atten))
self.atten.set_attenuation(vc_atten)
self.pspl.amplitude = self.pulse_polarity * amplitude
time.sleep(0.04)
def connect(self, resource_name=None, interface_type="VISA"):
"""Connect to the RF source via a specified physical interface. Defaults
to the IP address given at instatiation and the VISA interface if these
arguments are not given.
Args:
resource_name: IP address of BNC. Defaults to None.
interface_type: Physical interface for communication. Default is None,
indicating use of PyVISA.
Returns:
None.
"""
if resource_name is not None:
if is_valid_ipv4(resource_name):
resource_name = resource_name + "::inst0::INSTR"
else:
logger.error("Invalid IP address for BNC845: {}.".format(resource_name))
super(BNC845, self).connect(resource_name, interface_type)
self.interface._resource.read_termination = '\n'
self.interface._resource.write_termination = '\n'
# Setup the reference every time
# Output 10MHz for daisy-chaining and lock to 10MHz external
# reference
self.output = True
self.interface.write('SOURCE:ROSC:EXT:FREQ 10E6')
self.interface.write('SOUR:ROSC:SOUR EXT')
# Check that it locked -- it does not lock.
for ct in range(10):
locked = self.interface.query('SOURCE:ROSC:LOCKED?')
logger.debug("Lock attempt {}: {}".format(ct, locked))
if locked == '1':
break
time.sleep(0.5)
if locked != '1':
logger.warning('BNC845 at %s is unlocked.', self.resource_name.split("::")[1]);
def set_voltage(voltage):
# Calculate the voltage controller attenuator setting
self.pspl.amplitude = self.polarity * 7.5 * np.power(
10, -self.pspl_base_attenuation / 20.0)
vc_atten = abs(
20.0 * np.log10(abs(voltage) / 7.5)
) - self.pspl_base_attenuation - self.circuit_attenuation
if vc_atten <= self.atten.minimum_atten():
logger.error(
"Voltage controlled attenuation {} under range.".format(
vc_atten))
raise ValueError(
"Voltage controlled attenuation {} under range.".format(
vc_atten))
if self.atten.maximum_atten() < vc_atten:
logger.error(
"Voltage controlled attenuation {} over range.".format(
vc_atten))
raise ValueError(
"Voltage controlled attenuation {} over range.".format(
vc_atten))
self.atten.set_attenuation(vc_atten)
time.sleep(0.02)
async def run(self):
"""This is run for each step in a sweep."""
for dig in self.digitizers:
dig.acquire()
await asyncio.sleep(0.75)
if not self.cw_mode:
for awg in self.awgs:
awg.run()
# Wait for all of the acquisitions to complete
timeout = 10
try:
await asyncio.gather(
*
[dig.wait_for_acquisition(timeout) for dig in self.digitizers])
except Exception as e:
logger.error("Received exception %s in run loop. Bailing", repr(e))
self.shutdown()
sys.exit(0)
for dig in self.digitizers:
dig.stop()
if not self.cw_mode:
for awg in self.awgs:
awg.stop()
def query(self, command, nbytes=64):
self.write(command)
response = self.read(nbytes=nbytes)
if response == "Invalid Command":
logger.error("Invalid command {} to Holzworth {}.".format(
command, self.serial))
return response
def set_all(self, params, digit=4):
""" Set the connections of all channels
params: number, string or dictionary defining which channel to be set to which terminal
digit: number of digits per channel. Default 4 (channels, bits)
Examples: set_all({'A':2}) or set_all(2) or set_all('10') sets channel A to 2, disconnects channel B
"""
logger.debug("Set all connections for %s" % self.name)
if isinstance(params, int):
val = params
elif isinstance(params, str):
val = int(params, 2)
elif isinstance(params, dict):
val = 0
for k, v in params.items():
shift = (ord(k.upper()) - 65) * digit
shift += v - 1
val += 1 << shift
else:
logger.error(
"Function set_all is not yet implemented for this type of argument: %s"
% type(params))
return None
res = self.write("SETP=" + str(val))
return res
async def wait_for_acquisition(self, timeout=5):
while not self.done():
if (datetime.datetime.now() -
self.last_timestamp).seconds > timeout:
logger.error("Digitizer %s timed out.", self.name)
break
await asyncio.sleep(0.2)
def write(self, command):
try:
wlen = self._e_out.write(command.encode(), timeout=self.TIMEOUT)
assert wlen == len(command.encode())
except usb.core.USBError:
logger.error("Command {} to Holzworth {} timed out!".format(
command, self.serial))
def channel_setup(self, channel):
a, b, c = channel.channel_tuple
self._lib.enable_stream(a, b, c)
if channel.stream_type == "Raw":
return
elif channel.stream_type == "Demodulated":
self._lib.set_nco_frequency(a, b, channel.if_freq)
elif channel.stream_type == "Integrated":
if channel.kernel is None:
logger.error("Integrated streams must specify a kernel")
return
# convert to complex128
channel.kernel = channel.kernel.astype(complex)
self._lib.write_kernel(a, b, c, channel.kernel)
self._lib.set_kernel_bias(a, b, c, channel.kernel_bias)
self._lib.set_threshold(a, c, channel.threshold)
self._lib.set_threshold_invert(a, c, channel.threshold_invert)
self._lib.set_threshold_input_sel(a, c, channel.threshold_input_sel)
elif channel.stream_type == "State":
return
elif channel.stream_type == "Correlated":
return
else:
logger.error("Unrecognized stream type %s" % channel.stream_type)
def enumerate(cls):
try:
lib = ctypes.CDLL("HolzworthMulti.dll")
except:
logger.error("Could not find the Holzworth driver.")
return
lib.getAttachedDevices.restype = ctypes.c_char_p
devices = lib.getAttachedDevices()
return devices.decode('ascii').split(',')
async def wait_for_acquisition(self, timeout=5):
while not self.done():
if (datetime.datetime.now() -
self.last_timestamp).seconds > timeout:
logger.error("Digitizer %s timed out.", self.name)
raise Exception("Alazar timed out.")
await asyncio.sleep(0.2)
logger.debug("Digitizer %s finished getting data.", self.name)
def read(self, nbytes=64):
data = None
try:
data = self._e_in.read(nbytes, timeout=self.TIMEOUT)
except usb.core.USBError:
logger.error("Read from Holzworth {} timed out!".format(
self.serial))
#Strip NULLs from reply and decode
return bytes(data).partition(b'\0')[0].decode()
def set_voltage(voltage):
# Calculate the voltage controller attenuator setting
self.pspl.amplitude = np.sign(voltage)*7.5*np.power(10, -self.pspl_base_attenuation/20.0)
vc_atten = abs(20.0 * np.log10(abs(voltage)/7.5)) - self.pspl_base_attenuation - self.circuit_attenuation
if vc_atten <= 6.0:
logger.error("Voltage controlled attenuation under range (6dB).")
raise ValueError("Voltage controlled attenuation under range (6dB).")
self.atten.set_attenuation(vc_atten)
time.sleep(0.02)
def wait_for_acquisition(self, dig_run, timeout=5, ocs=None, progressbars=None):
progress_updaters = {}
if ocs and progressbars:
for oc in ocs:
if hasattr(progressbars[oc], 'goto'):
progress_updaters[oc] = lambda x: progressbars[oc].goto(x)
else:
progress_updaters[oc] = lambda x: setattr(progressbars[oc], 'value', x)
if self.gen_fake_data:
total_spewed = 0
counter = {chan: 0 for chan in self._chan_to_wsocket.keys()}
initial_points = {oc: oc.points_taken.value for oc in ocs}
# print(self.number_averages, self.number_segments)
for j in range(self.number_averages):
# for i in range(self.number_segments):
if self.ideal_data is not None:
#add ideal data for testing
if hasattr(self, 'exp_step') and self.increment_ideal_data:
raise Exception("Cannot use both exp_step and increment_ideal_data")
elif hasattr(self, 'exp_step'):
total_spewed += self.spew_fake_data(
counter, self.ideal_data[self.exp_step])
elif self.increment_ideal_data:
total_spewed += self.spew_fake_data(
counter, self.ideal_data[self.ideal_counter])
else:
total_spewed += self.spew_fake_data(
counter, self.ideal_data)
else:
total_spewed += self.spew_fake_data(counter, [0.0 for i in range(self.number_segments)])
time.sleep(0.0001)
self.ideal_counter += 1
while not self.done():
if not dig_run.is_set():
self.last_timestamp.value = datetime.datetime.now().timestamp()
if (datetime.datetime.now().timestamp() - self.last_timestamp.value) > timeout:
logger.info(f"timeout when recv={self.total_received.value}, exp={self.number_segments*self.record_length*self.number_averages*len(self.channels)}")
logger.error("Digitizer %s timed out. Timeout was %f, time was %f", self.name, timeout, (datetime.datetime.now().timestamp() - self.last_timestamp.value))
raise Exception("Alazar timed out.")
if progressbars:
for oc in ocs:
progress_updaters[oc](oc.points_taken.value)
#time.sleep(0.2) Does this need to be here at all?
if progressbars:
try:
progressbars[oc].next()
progressbars[oc].finish()
except AttributeError:
pass
logger.info(f"Digitizer %s finished getting data when recv={self.total_received.value}, exp={self.number_segments*self.record_length*self.number_averages*len(self.channels)}.", self.name)
def __init__(self, resource_name=None, *args, **kwargs):
"""Berkely Nucleonics BNC845-M RF Signal Generator
Args:
resource_name: The IP address of the source to conenct to, as string.
"""
if resource_name is not None:
if is_valid_ipv4(resource_name):
resource_name = resource_name + "::inst0::INSTR"
else:
logger.error("Invalid IP address for BNC845: {}.".format(resource_name))
super(BNC845, self).__init__(resource_name, *args, **kwargs)
def receive_data(self, channel, oc, exit, ready, run):
try:
sock = self._chan_to_rsocket[channel]
sock.settimeout(2)
self.last_timestamp.value = datetime.datetime.now().timestamp()
total = 0
ready.value += 1
logger.debug(
f"{self} receiver launched with pid {os.getpid()}. ppid {os.getppid()}"
)
while not exit.is_set():
# push data from a socket into an OutputConnector (oc)
# wire format is just: [size, buffer...]
# TODO receive 4 or 8 bytes depending on sizeof(size_t)
run.wait() # Block until we are running again
try:
msg = sock.recv(8)
self.last_timestamp.value = datetime.datetime.now(
).timestamp()
except:
continue
# reinterpret as int (size_t)
msg_size = struct.unpack('n', msg)[0]
buf = sock_recvall(sock, msg_size)
if len(buf) != msg_size:
logger.error(
"Channel %s socket msg shorter than expected" %
channel.channel)
logger.error("Expected %s bytes, received %s bytes" %
(msg_size, len(buf)))
return
data = np.frombuffer(buf, dtype=channel.dtype)
# logger.info(f"X6 {msg_size} got {len(data)}")
total += len(data)
oc.push(data)
# logger.info('RECEIVED %d %d', total, oc.points_taken.value)
# TODO: this is suspeicious
for stream in oc.output_streams:
abc = 0
while True:
try:
dat = stream.queue.get(False)
abc += 1
time.sleep(0.005)
except queue.Empty as e:
# logger.info(f"All my data {oc} has been consumed {abc}")
break
# logger.info("X6 receive data exiting")
except Exception as e:
logger.warning(f"{self} receiver raised exception {e}. Bailing.")
async def process_data(self, data):
"""Fill the ground and excited data bins"""
if data.shape[0] == self.ground_data.size * 2:
dsplit = np.array(np.split(data, self.num_segments))
gd = dsplit[::2]
ed = dsplit[1::2]
self.ground_data = gd.T
self.excited_data = ed.T
self.counter = self.num_segments + 1
else:
if self.counter % 2 != 0:
N = (self.counter + 1) // 2 - 1
self.ground_data[:, N] = data
else:
N = self.counter // 2 - 1
self.excited_data[:, N] = data
self.counter += 1
if self.counter > self.num_segments:
self.counter = 1
filter_success = False
filter_tries = 0
ORIG_TOL = self.TOLERANCE
while not filter_success:
try:
filter_tries += 1
self.compute_filter()
filter_success = True
except np.linalg.linalg.LinAlgError as e:
self.TOLERANCE *= 1.5
logger.warning(
"Single shot filter failed with error: {}. Increasing kernel tolerance to {}."
.format(e, self.TOLERANCE))
logger.warning(
"Single shot filter retrying {} out of {} times.".
format(filter_tries, self.MAX_TRIES))
if filter_tries > self.MAX_TRIES:
logger.error(
"Could not find a non-singluar single-shot filter after {} tries with tolerance {}."
.format(filter_tries, self.TOLERANCE))
self.fidelity_result = np.complex128(0)
break
self.TOLERANCE = ORIG_TOL
if self.logistic_regression.value:
self.logistic_fidelity()
if self.save_kernel.value:
self._save_kernel()
for os in self.fidelity.output_streams:
await os.push(self.fidelity_result)
def connect(self, resource_name=None, interface_type=None):
"""Either connect to the resource name specified during initialization, or specify
a new resource name here."""
self._unfreeze()
if resource_name is None and self.resource_name is None:
raise Exception(
"Must supply a resource name to 'connect' if the instrument was initialized without one."
)
elif resource_name is not None:
self.resource_name = resource_name
self.full_resource_name = self.resource_name
if interface_type is None:
# Load the dummy interface, unless we see that GPIB is in the resource string
if any([
x in self.resource_name for x in [
"GPIB", "USB", "SOCKET", "hislip", "inst0", "COM",
"ASRL", "TCPIP"
]
]):
interface_type = "VISA"
try:
if interface_type is None:
logger.debug(
"Instrument {} is using a generic instrument " +
"interface as none was provided.".format(self.name))
self.interface = Interface()
elif interface_type == "VISA":
if "GPIB" in self.full_resource_name:
pass
elif any(
is_valid_ipv4(substr)
for substr in self.full_resource_name.split(
"::")) and "TCPIP" not in self.full_resource_name:
# assume single NIC for now
self.full_resource_name = "TCPIP0::" + self.full_resource_name
self.interface = VisaInterface(self.full_resource_name)
logger.debug(
"A pyVISA interface {} was created for instrument {}.".
format(str(self.interface._resource), self.name))
elif interface_type == "Prologix":
self.interface = PrologixInterface(self.full_resource_name)
else:
raise ValueError("That interface type is not yet recognized.")
except:
logger.error("Could not initialize interface for %s.",
self.full_resource_name)
self.interface = MagicMock()
self._freeze()
def upload_waveform(self, data, channel=1, name="mywaveform", dac=True):
""" Load string-converted data into a waveform memory
dac: True if values are converted to integer already
"""
# Check number of data points
N = len(data)
if N < 8 or N > 65536:
log.error(
"Data has invalid length = %d. Must be between 8 and 65536. Cannot upload waveform."
% N)
return False
# Check length of waveform length, must be <=12
if len(name) > 12:
logger.warning("Waveform length is larger than the limit of 12. Will be clipped off: %s --> %s" \
%(name,name[:12]))
name = name[:12] # Arb waveform name at most 12 characters
if dac: # Data points are integer
dac_str = ":DAC"
# Values must be within -32767 and 32767
if abs(np.max(data)) > 32767:
logger.warning(
"Some points out of range [-32767,32767] will be clipped off."
)
data = [int(max(min(datum, 32767), -32767)) for datum in data]
else: # Data points are float
dac_str = ""
# Values must be within -1 and 1
if abs(np.max(data)) > 1:
logger.warning(
"Some points out of range [-1,1] will be clipped off.")
data = [max(min(datum, 1), -1) for datum in data]
# convert array into string
data_str = ','.join([str(item) for item in data])
logger.debug("Upload waveform %s to instrument %s, channel %d: %s" %
(name, self.name, channel, data))
self.interface.write("SOURce%s:DATA:ARBitrary1%s %s,%s" %
(channel, dac_str, name, data_str))
# Check if successfully uploaded or not
data_pts = int(
self.interface.query("SOURce%s:DATA:ATTR:POIN? %s" %
(channel, name)))
if data_pts == N:
logger.debug(
"Successfully uploaded waveform %s to instrument %s, channel %d"
% (name, self.name, channel))
return True
else:
logger.error(
"Failed uploading waveform %s to instrument %s, channel %d" %
(name, self.name, channel))
return False
def connect(self, resource_name=None, interface_type="VISA"):
if resource_name is not None:
self.resource_name = resource_name
if is_valid_ipv4(self.resource_name):
self.resource_name += "::hpib7,16::INSTR"
else:
logger.error(
"The resource name for the Agilent E8363C: {} is " +
"not a valid IPv4 address.".format(self.resource_name))
super(AgilentE8363C, self).connect(resource_name=None,
interface_type=interface_type)
self.interface._resource._read_termination = u"\n"
self.interface._resource.write_termination = u"\n"
def self_check(self):
N = len(self.data)
if N < 8:
logger.error("Waveform %s must have at least 8 points" %
self.name)
return False
else:
if self.mkr_pts < 4:
self.mkr_pts = 4
logger.warning(
"Marker points of waveform %s is less than 4. Set to 4."
% self.name)
if self.mkr_pts > N - 3:
self.mkr_pts = N - 3
logger.warning(
"Marker points of waveform %s is longer than lenght-3 = %d. Set to lenght-3."
% (self.name, N - 3))
return True
def channel_setup(self, channel):
a, b, c = channel.channel_tuple
self._lib.enable_stream(a, b, c)
if channel.stream_type == "raw":
return
elif channel.stream_type == "demodulated":
self._lib.set_nco_frequency(a, b, channel.if_freq)
elif channel.stream_type == "integrated":
if channel.kernel is None:
logger.error("Integrated streams must specify a kernel")
return
self._lib.write_kernel(a, b, c, channel.kernel)
self._lib.set_kernel_bias(a, b, c, channel.kernel_bias)
self._lib.set_threshold(a, c, channel.threshold)
self._lib.set_threshold_invert(a, c, channel.threshold_invert)
else:
logger.error("Unrecognized stream type %s" % channel.stream_type)
def request(self, method, command):
""" Send a request via HTTP and retrieve response """
if self._resource is None:
logger.error(
"No connection established for %s. Query returns None." %
self.name)
return None
logger.debug("Send request to %s: %s" % (self.name, command))
self._resource.request(method, command)
res = self._resource.getresponse()
if res.status == 200:
logger.debug("Successfully made request to %s. Status: %s - %s" %
(self.name, res.status, res.reason))
else:
logger.warning("Issue making request to %s. Status: %s - %s" %
(self.name, res.status, res.reason))
data = res.read()
logger.debug("Response from %s: %s" % (self.name, data))
return data
async def wait_for_acquisition(self, timeout=5):
if self.gen_fake_data:
for j in range(self._lib.nbr_round_robins):
for i in range(self._lib.nbr_segments):
if self.ideal_data is not None:
#add ideal data for testing
if hasattr(self, 'exp_step'):
self.spew_fake_data(self.ideal_data[self.exp_step][i])
else:
self.spew_fake_data(self.ideal_data[i])
else:
self.spew_fake_data()
await asyncio.sleep(0.005)
else:
while not self.done():
if (datetime.datetime.now() - self.last_timestamp).seconds > timeout:
logger.error("Digitizer %s timed out.", self.name)
break
await asyncio.sleep(0.1)
def receive_data(self, channel, oc):
# push data from a socket into an OutputConnector (oc)
self.last_timestamp = datetime.datetime.now()
# wire format is just: [size, buffer...]
sock = self._chan_to_rsocket[channel]
# TODO receive 4 or 8 bytes depending on sizeof(size_t)
msg = sock.recv(8)
# reinterpret as int (size_t)
msg_size = struct.unpack('n', msg)[0]
buf = sock.recv(msg_size, socket.MSG_WAITALL)
if len(buf) != msg_size:
logger.error("Channel %s socket msg shorter than expected" % channel.channel)
logger.error("Expected %s bytes, received %s bytes" % (msg_size, len(buf)))
# assume that we cannot recover, so stop listening.
loop = asyncio.get_event_loop()
loop.remove_reader(sock)
return
data = np.frombuffer(buf, dtype=channel.dtype)
asyncio.ensure_future(oc.push(data))
def __new__(cls, name, set_all=True, meas_file=None):
settings = auspex.config.load_meas_file(meas_file)
modules = (
importlib.import_module('auspex.instruments.' + name)
for loader, name, is_pkg in pkgutil.iter_modules(auspex.instruments.__path__)
)
module_map = {}
for mod in modules:
instrs = (_ for _ in inspect.getmembers(mod) if inspect.isclass(_[1]) and
issubclass(_[1], Instrument) and
_[1] != Instrument and _[1] != SCPIInstrument and
_[1] != CLibInstrument)
module_map.update(dict(instrs))
try:
instr_par = settings['instruments'][name]
except KeyError as e:
e.args = ('Could not find instrument {} in measurement file: {}'.format(e.args[0],
auspex.config.find_meas_file()))
raise
instr_type = instr_par['type']
instr_par['name'] = name
if instr_type in module_map:
logger.debug("Found instrument class %s for '%s' at loc %s when loading experiment settings.", instr_type, name, instr_par['address'])
try:
inst = module_map[instr_type](correct_resource_name(str(instr_par['address'])), name=name)
except Exception as e:
logger.error("Initialization of caused exception:", name, str(e))
inst = None
if inst:
inst.connect()
if set_all:
inst.set_all(instr_par)
return inst
def new_file(self):
""" Open a new data file to write """
# Close the current file, if any
if self.file is not None:
try:
self.file.close()
except Exception as e:
logger.error("Encounter exception: {}".format(e))
logger.error(
"Cannot close file '{}'. File may be damaged.".format(
self.file.filename))
# Get new file name
self.filename.value = self.new_filename()
head = os.path.dirname(self.filename.value)
head = os.path.normpath(head)
dirs = head.split(os.sep)
# Check if path exists. If not, create new one(s).
os.makedirs(head, exist_ok=True)
logger.debug("Create new data file: %s." % self.filename.value)
# Copy current settings to a folder with the file name
if self.save_settings:
self.save_json()
return h5py.File(self.filename.value, 'w', libver='latest')
def load_instruments(experiment):
# Inspect all vendor modules in auspex instruments and construct
# a map to the instrument names.
modules = (
importlib.import_module('auspex.instruments.' + name)
for loader, name, is_pkg in pkgutil.iter_modules(auspex.instruments.__path__)
)
module_map = {}
for mod in modules:
instrs = (_ for _ in inspect.getmembers(mod) if inspect.isclass(_[1]) and
issubclass(_[1], Instrument) and
_[1] != Instrument and _[1] != SCPIInstrument and
_[1] != CLibInstrument)
module_map.update(dict(instrs))
logger.debug("Found instruments %s.", module_map)
# Loop through instruments, and add them to the experiment if they are enabled.
for instr_name, instr_par in experiment.instrument_settings['instrDict'].items():
if instr_par['enabled']:
# This should go away as auspex and pyqlab converge on naming schemes
instr_type = instr_par['x__class__']
# Instantiate the desired instrument
if instr_type in module_map:
logger.debug("Found instrument class %s for '%s' at loc %s when loading experiment settings.", instr_type, instr_name, instr_par['address'])
try:
inst = module_map[instr_type](correct_resource_name(instr_par['address']), name=instr_name)
except Exception as e:
import ipdb; ipdb.set_trace()
logger.error("Initialization caused exception:", str(e))
inst = None
# Add to class dictionary for convenience
setattr(experiment, 'instr_name', inst)
# Add to _instruments dictionary
experiment._instruments[instr_name] = inst
else:
logger.error("Could not find instrument class %s for '%s' when loading experiment settings.", instr_type, instr_name)
def shutdown_instruments(self):
# remove socket listeners
logger.debug("Shutting down instruments")
try:
for awg in self.awgs:
awg.stop()
for dig in self.digitizers:
dig.stop()
for gen_proxy in self.generators:
gen_proxy.instr.output = False
except:
logger.error('Could Not Stop AWGs or Digitizers; Reset Experiment')
for instr in self.instruments:
instr.disconnect()
self.dig_exit.set()
for listener in self.dig_listeners:
listener.join(2)
if listener.is_alive():
logger.debug(f"Terminating listener {listener} aggressively")
listener.terminate()
del listener
import gc
gc.collect()
def connect(self, ipaddr=None, gpib=None):
"""Connect to a GPIB device through a Prologix GPIB-ETHERNET controller.
box.
Args:
ipaddr: The IP address of the Prologix GPIB-ETHERNET.
gpib: The GPIB address of the instrument to be controlled.
Returns:
None.
"""
if ipaddr is not None:
self.ipaddr = ipaddr
if gpib is not None:
self.gpib = gpib
try:
self.sock = socket.socket(socket.AF_INET, socket.SOCK_STREAM,
socket.IPPROTO_TCP)
self.sock.settimeout(self._timeout)
self.sock.connect(
(self.ipaddr, 1234)) #Prologix communicates on port 1234
except socket.error as err:
logger.error("Cannot open socket to Prologix at {0}: {1}".format(
self.ipaddr, err.msg))
raise PrologixError(self.ipaddr) from err
self.sock.send(b"++ver\r\n")
whoami = self.sock.recv(128).decode()
if "Prologix" not in whoami:
logger.error(
"The device at {0} does not appear to be a Prologix; got {1}.".
format(self.ipaddr, whoami))
raise PrologixError(whoami)
self.sock.send(b"++mode 1\r\n") #set to controller mode
self.sock.send(b"++auto 1\r\n") #enable read-after-write
self._addr()
self.sock.send(b"++clr\r\n")
idn = self.query(self.idn_string)
if idn is '':
logger.error(("Did not receive response to GPIB command {0} " +
"from GPIB device {1} on Prologix at {2}.").format(
self.idn_string, self.gpib, self.ipaddr))
raise PrologixError(idn)
else:
logger.debug(
("Succesfully connected to device {0} at GPIB port {1} on" +
" Prologix controller at {2}.").format(
idn, self.gpib, self.ipaddr))
