def statistics_panel(self):
"""统计面板"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.沙盘[0],
screen_point.沙盘[1])
m1.click(self.BECivilWin, '', screen_point.统计面板[0],
screen_point.统计面板[1])
sleep(2)
w0.controlClick("[CLASS:Button; INSTANCE:29]")
sleep(2)
w0.controlClick("[CLASS:Button; INSTANCE:29]")
else:
raise Exception("未识别BECivil窗口")
def delete_contract_managemeng(self):
"""删除合同"""
if WinControl(self.IMWin).exists():
m1 = MouseControl()
m1.click(self.IMWin, '', screen_point.工程管理[0],
screen_point.工程管理[1])
m1.click(self.IMWin, '', screen_point.合同管理[0],
screen_point.合同管理[1])
m1.click(self.IMWin, '', screen_point.删除施工合同[0],
screen_point.删除施工合同[1])
m1.click(self.IMWin, '', screen_point.确认删除合同[0],
screen_point.确认删除合同[1])
else:
raise Exception('没有检测到IM窗口！')
def refresh_data(self):
"""刷新数据"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.沙盘[0],
screen_point.沙盘[1])
m1.click(self.BECivilWin, '', screen_point.刷新数据[0],
screen_point.刷新数据[1])
sleep(4)
if w0.exists():
w0.wait(3)
t = w0.getPos()
if t == (838, 438, 1082, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("数据刷新未完成")
else:
raise Exception("未识别BECivil窗口")
def add_form(self, y1=515, message='封面'):
"""添加表单用"""
w0 = WinControl("添加表单")
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click('添加表单', '', 990, 495)
sleep(1)
m1.click('添加表单', '', 990, y1)
sleep(0.5)
m1.click('添加表单', '', 990, 530)
autoit.send(message)
sleep(0.5)
w0.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception('添加表单未成功')
def edit_contract_management(self):
"""编辑合同"""
if WinControl(self.IMWin).exists():
m1 = MouseControl()
m1.click(self.IMWin, '', screen_point.编辑施工合同[0],
screen_point.编辑施工合同[1])
sleep(3)
m1.click(self.IMWin, '', screen_point.施工负责人[0],
screen_point.施工负责人[1])
autoit.send(self.message12)
m1.click(self.IMWin, '', screen_point.总监理工程师[0],
screen_point.总监理工程师[1])
autoit.send(self.message13)
m1.click(self.IMWin, '', screen_point.项目总工[0],
screen_point.项目总工[1])
autoit.send(self.message14)
m1.click(self.IMWin, '', screen_point.保存[0], screen_point.保存[1])
else:
raise Exception('没有检测到IM窗口！')
def start_IM(self):
"""启动IM"""
if WinControl(self.BECivilWin).exists():
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.资料[0],
screen_point.资料[1])
sleep(1)
m1.click(self.BECivilWin, '', screen_point.质检计量[0],
screen_point.质检计量[1])
# 等待IM界面
w1 = WinControl(self.IMWin)
w1.wait(30)
# 关闭筑业升级进程
if autoit.process_exists("ZY.Downloader.exe"):
autoit.process_close("ZY.Downloader.exe")
else:
pass
w1.setState(3)
else:
print('BECivil未启动，无法启动IM。')
def setting(self):
"""设置"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.任务[0], screen_point.任务[1])
m1.click(self.BECivilWin, '', screen_point.设置[0], screen_point.设置[1])
'''
m1.click(self.BECivilWin, '', screen_point.设置[0], 140)# 仪器信息
sleep(1)
w1 = WinControl('仪器信息')
if w1.exists():
w1.wait(3)
w1.controlClick('[CLASS:Button; INSTANCE:1]')
sleep(1)
m1.click('仪器信息', '', 910, 650)
autoit.send('测试脚本用添加仪器')
m1.click('仪器信息', '', 1080, 650)
autoit.send('134652')
autoit.send("{ENTER}")
m1.click('仪器信息', '', 1180, 370)# 关闭仪器信息
else:
raise Exception('未打开仪器信息窗口')
sleep(1)
m1.click(self.BECivilWin, '', screen_point.设置[0], screen_point.设置[1])
'''
# 点位图管理
m1.click(self.BECivilWin, '', screen_point.设置[0], 160)
sleep(2)
w2 = WinControl('点位图管理')
if w2.exists():
w2.wait(3)
w2.controlClick("[CLASS:Button; INSTANCE:1]")
sleep(1)
# 截图点位图
m1.click(self.BECivilWin, '', 710, 390, button='right')
m1.click(self.BECivilWin, '', 660, 405)
sleep(2)
w3 = WinControl('点位图命名')
if w3.exists():
w3.wait(3)
w3.controlSetText('[CLASS:Edit; INSTANCE:1]', '测试脚本用点位图')
sleep(1)
w3.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception('未打开点位图命名窗口')
sleep(1)
# 关闭点位图管理
m1.click('点位图管理', '', 1336, 183)
else:
raise Exception('未打开点位图管理窗口')
else:
raise Exception('未识别市政窗口')
def upload_project(self, projectname):
"""上传工程"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.系统[0], screen_point.系统[1])
m1.click(self.BECivilWin, '', screen_point.上传工程[0], screen_point.上传工程[1])
w1 = WinControl("打开")
sleep(4)
if w1.exists():
w1.wait(3)
w1.setState(3)
# 输入保存上传工程的地址
m1.click('打开', '', 820, 45)
w1.controlSetText('[CLASS:Edit; INSTANCE:2]', self.uploadaddress)
autoit.send("{ENTER}")
sleep(2)
w1.controlSetText('[CLASS:Edit; INSTANCE:1]', projectname)
w1.controlClick('[CLASS:Button; INSTANCE:1]')
sleep(2)
w2 = WinControl("上传工程")
sleep(2)
if w2.exists():
w2.wait(3)
w2.controlClick('[CLASS:Button; INSTANCE:3]')
sleep(3)
w3 = WinControl("上传位置")
if w3.exists():
w3.wait(3)
# 选择IM测试
m1.click(self.BECivilWin, '', 940, 435)
sleep(1)
w3.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception('未选中上传位置窗口')
sleep(1)
w2.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception('未选中上传工程窗口')
else:
raise Exception('未选中打开窗口')
sleep(22)
w5 = WinControl("Luban Explorer（Civil）提醒您")
w5.wait(60)
if w5.exists():
pass
else:
raise Exception("上传成功提示未显示")
else:
raise Exception("未识别BECivil窗口")
def open_project(self, projectname):
"""打开工程"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.系统[0], screen_point.系统[1])
m1.click(self.BECivilWin, '', screen_point.打开工程[0], screen_point.打开工程[1])
sleep(3)
w1 = WinControl("选择工程")
if w1.exists():
w1.wait(3)
w1.setState(3)
# 输入名字搜索
m1.click("选择工程", '', 50, 35)
autoit.send(projectname)
sleep(5)
# 打开测试脚本用土建工程
m1.click(self.BECivilWin, '', 92, 133, clicks=3)
else:
raise Exception("未选中选择工程窗口")
sleep(10)
# 使视图视角变为俯视视角
m1.click(self.BECivilWin, '', 440, 440, button='right')
m1.click(self.BECivilWin, '', 490, 475)
else:
raise Exception("未识别BECivil窗口")
def start_BECivli(self):
"""登录BECivil"""
# 判断屏幕分辨率是否为1920*1080
if verifySystemMetrics(1920, 1080) == True:
pass
else:
raise Exception("分辨率不为1920*1080，请更改分辨率")
# 判断Shell、BECivil和IM是否存在，若存在则退出
processes = [
ProcessControl(self.IMProcess),
ProcessControl(self.BECivilProcess),
ProcessControl(self.ShellProcess)
]
for process in processes:
if process.exists():
process.close()
# 启动软件以及登录
try:
autoit.run(self.path)
except Exception as e:
print(e)
print('软件安装路径有误，或者软件安装路径中有中文，\nstart_APP函数中path变量前需要加r！')
else:
w1 = WinControl('用户登录')
w1.wait()
if w1.exists():
w1.controlSetText('[CLASS:Edit; INSTANCE:1]', self.username)
w1.controlSetText('[CLASS:Edit; INSTANCE:2]', self.password)
w1.controlSetText('[CLASS:Edit; INSTANCE:3]', self.ip)
w1.controlClick('Button1')
# 等待BECivil界面
w2 = WinControl(self.BECivilWin)
w2.wait(25)
w2.setState(3)
sleep(1)
"""
def project_time(self):
"""工程时间"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.沙盘[0],
screen_point.沙盘[1])
m1.click(self.BECivilWin, '', screen_point.工程时间[0],
screen_point.工程时间[1])
sleep(2)
w1 = WinControl("工程时间")
if w1.exists():
w1.wait(3)
w1.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未打开工程时间窗口")
else:
raise Exception("未识别BECivil窗口")
def measure_point_management(self):
"""测点管理"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.任务[0], screen_point.任务[1])
m1.click(self.BECivilWin, '', screen_point.测点管理[0], screen_point.测点管理[1])
sleep(1)
# 无法识别测点列表窗口
# 添加
m1.click(self.BECivilWin, '', 1185, 270)
sleep(1)
w1 = WinControl('新建测点')
if w1.exists():
w1.wait(3)
# 选择深层位移
m1.click('新建测点', '', 980, 445)
sleep(1)
m1.click('新建测点', '', 980, 515)
sleep(1)
# 测点名称
m1.click('新建测点', '', 980, 480)
autoit.send('测点名称123')
sleep(1)
# 选择位置
m1.click('新建测点', '', 850, 520)
sleep(1)
m1.click(self.BECivilWin, '', 750, 620)
m1.click(self.BECivilWin, '', 750, 620, button='right')
m1.click(self.BECivilWin, '', 710, 635)
sleep(1)
w1.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception('未打开新建测点窗口')
sleep(2)
# 数据读取
m1.click(self.BECivilWin, '', 1380, 270)
sleep(1)
w2 = WinControl("打开")
if w2.exists():
w2.wait(3)
m1.click('打开', '', 940, 45)
w2.controlSetText('[CLASS:Edit; INSTANCE:2]', self.uploadaddress)
autoit.send("{ENTER}")
sleep(1)
w2.controlSetText('[CLASS:Edit; INSTANCE:1]', '测点数据读取模板.xlsx')
w2.controlClick('[CLASS:Button; INSTANCE:1]')
sleep(2)
w3 = WinControl('数据读取设置')
if w3.exists():
w3.wait(3)
# 数据表名
m1.click('数据读取设置', '', 980, 435)
sleep(1)
# 深层位移
m1.click('数据读取设置', '', 980, 455)
sleep(1)
# 数据类型
m1.click('数据读取设置', '', 980, 470)
sleep(1)
# 深层位移
m1.click('数据读取设置', '', 980, 597)
sleep(1)
w3.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception('未打开数据读取设置窗口')
else:
raise Exception('未识别打开窗口')
sleep(1)
# 关闭测点管理
m1.click(self.BECivilWin, '', screen_point.测点管理[0], screen_point.测点管理[1])
else:
raise Exception("未识别市政窗口")
def manage_working_set(self):
"""管理工作集"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.系统[0],
screen_point.系统[1])
m1.click(self.BECivilWin, '', screen_point.管理工作集[0],
screen_point.管理工作集[1])
sleep(2)
w1 = WinControl('管理工作集')
if w1.exists():
w1.wait(3)
#w1.setState(3)
w1.controlSetText('[CLASS:Edit; INSTANCE:1]', '测试脚本用创建工作集')
sleep(3)
# 选中要删除的工作集
m1.click('管理工作集', '', 880, 390)
sleep(2)
# 点击删除
m1.click('管理工作集', '', 870, 760)
sleep(2)
if w0.exists():
sleep(2)
t1 = w0.getPos()
if t1 == (844, 438, 1076, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick('[CLASS:Button; INSTANCE:1]')
sleep(3)
if w0.exists():
t2 = w0.getPos()
if t2 == (880, 438, 1040, 602):
pass
else:
raise Exception('Something went wrong.')
sleep(2)
if w0.exists():
t3 = w0.getPos()
if t3 == (880, 438, 1040, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception('未弹出删除确认框')
else:
raise Exception('未弹出删除成功选择框')
else:
raise Exception('未弹出删除工作集选择框')
sleep(2)
# 关闭管理工作集窗口
m1.click('管理工作集', '', 1114, 263)
else:
raise Exception("未弹出管理工作集窗口")
else:
raise Exception("未识别BECivil窗口")
def add_monitor(self):
""" """
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.沙盘[0], screen_point.沙盘[1])
m1.click(self.BECivilWin, '', screen_point.沙盘模式[0], screen_point.沙盘模式[1])
sleep(2)
# 使视图视角变为俯视视角
m1.click(self.BECivilWin, '', 440, 440, button='right')
m1.click(self.BECivilWin, '', 490, 475)
sleep(2)
m1.click(self.BECivilWin, '', screen_point.插入监控[0], screen_point.插入监控[1])
w1 = WinControl('插入监控')
sleep(2)
if w1.exists():
w1.wait(3)
# 关联监控
w1.controlClick('[CLASS:Button; INSTANCE:3]')
sleep(8)
w2 = WinControl('关联监控')
if w2.exists():
w2.wait(3)
m1.click('关联监控', '', 623, 375)
sleep(2)
w2.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未打开关联监控窗口")
sleep(1)
# 详细位置
w1.controlClick("[CLASS:Button; INSTANCE:4]")
sleep(1)
m1.click(self.BECivilWin, '', 1050, 520)
sleep(1)
m1.click(self.BECivilWin, '', 1050, 520, button='right')
sleep(2)
m1.click(self.BECivilWin, '', 1100, 535)
sleep(1)
if w1.exists():
w1.wait(3)
w1.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未打开插入监控窗口")
else:
raise Exception("未打开插入监控窗口")
sleep(2)
if w0.exists():
w0.wait(3)
t = w0.getPos()
if t == (862, 438, 1058, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未显示插入监控成功窗口")
else:
raise Exception("未识别BECivil窗口")
def monitor_management(self):
"""监控管理"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.沙盘[0], screen_point.沙盘[1])
m1.click(self.BECivilWin, '', screen_point.监控管理[0], screen_point.监控管理[1])
sleep(1)
w1 = WinControl("监控管理")
if w1.exists():
w1.wait(3)
# 监控查看
m1.click('监控管理', '', 1140, 300)
sleep(7)
w2 = WinControl("监控查看")
if w2.exists():
w2.wait(3)
w2.controlClick("[CLASS:Button; INSTANCE:3]")
sleep(2)
w2.controlClick("[CLASS:Button; INSTANCE:4]")
else:
raise Exception("未打开监控查看窗口")
sleep(2)
# 编辑监控
m1.click('监控管理', '', 1180, 300)
sleep(2)
w3 = WinControl("编辑监控")
if w3.exists():
w3.wait(3)
w3.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未打开编辑监控窗口")
sleep(2)
# 删除
m1.click('监控管理', '', 1260, 300)
sleep(1)
if w0.exists():
w0.wait(3)
t = w0.getPos()
if t == (845, 438, 1075, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未识别确认删除窗口")
# 关闭监控管理窗口
m1.click('监控管理', '', 1360, 210)
else:
raise Exception('未识别监控管理窗口')
else:
raise Exception("未识别BECivil窗口")
def service_setting(self):
""" 、服务设置"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.沙盘[0], screen_point.沙盘[1])
m1.click(self.BECivilWin, '', screen_point.服务设置[0], screen_point.服务设置[1])
sleep(1)
w1 = WinControl("第三方监控服务设置")
if w1.exists():
w1.wait(3)
# 检测
w1.controlClick("[CLASS:Button; INSTANCE:1]")
sleep(7)
if w0.exists():
w0.wait(3)
t1 = w0.getPos()
if t1 == (880, 438, 1040, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未弹出检测成功窗口")
sleep(2)
# 确定
w1.controlClick("[CLASS:Button; INSTANCE:2]")
sleep(7)
if w0.exists():
w0.wait(3)
t2 = w0.getPos()
if t2 == (868, 438, 1052, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未弹出保存设置成功窗口")
else:
raise Exception("未弹出第三方监控服务设置")
else:
raise Exception("未识别BECivil窗口")
def monitoring_panel(self):
"""监控面板"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.沙盘[0], screen_point.沙盘[1])
m1.click(self.BECivilWin, '', screen_point.监控面板[0], screen_point.监控面板[1])
sleep(1)
# 启用沙盘模式
if w0.exists():
w0.wait(3)
t = w0.getPos()
if t == (830, 438, 1090, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception('未打开开启沙盘模式窗口')
sleep(13)
# 点击添加监控
m1.click(self.BECivilWin, '', 1800, 320)
sleep(7)
w1 = WinControl('添加监控')
if w1.exists():
w1.wait(3)
w1.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未弹出添加监控窗口")
sleep(4)
m1.click(self.BECivilWin, '', screen_point.沙盘模式[0], screen_point.沙盘模式[1])
else:
raise Exception("未识别BECivil窗口")
def start_BECivil(self):
"""登录BECivil"""
# 判断屏幕分辨率是否为1920*1080
if verifySystemMetrics(1920, 1080) == True:
pass
else:
raise Exception("分辨率不为1920*1080，请更改分辨率")
sleep(5)
# 初始化登录环境
processes = [
ProcessControl(self.IMProcess),
ProcessControl(self.BECivilProcess),
ProcessControl(self.ShellProcess)
]
for process in processes:
if process.exists():
process.close()
else:
pass
sleep(2)
# 启动软件以及登录
try:
autoit.run(self.path)
except Exception as e:
print(e)
print('软件安装路径有误，或者软件安装路径中有中文，\nstart_APP函数中path变量前需要加r！')
else:
sleep(3)
w1 = WinControl('用户登录')
if w1.exists():
w1.wait()
w1.controlSetText('[CLASS:Edit; INSTANCE:1]', self.username)
w1.controlSetText('[CLASS:Edit; INSTANCE:2]', self.password)
w1.controlSetText('[CLASS:Edit; INSTANCE:3]', self.ip)
w1.controlClick('Button1')
sleep(20)
# 如果检测到升级则进行升级过程，若没有则pass
w2 = WinControl("Luban Explorer（Civil）版本获取")
if w2.exists():
w2.wait(60)
print('>>>>>>>>检测到LubanBECivil正在升级')
sleep(60)
else:
pass
print('软件未升级')
sleep(3)
# 等待BECivil界面
w3 = WinControl(self.BECivilWin)
w3.wait(60)
if w3.exists():
#w3.wait(60)
sleep(5)
w4 = WinControl('启动提示')
if w4.exists():
w4.wait(3)
w4.controlClick('[CLASS:Button; INSTANCE:1]')
print('软件弹出了启动提示')
else:
pass
w3.wait(60)
w3.setState(3)
sleep(15)
else:
raise Exception("未识别BECivil打开的窗口")
# 检测CO进程并退出
ps = [
ProcessControl(self.COProcess),
ProcessControl(self.SuspernsionCtrlProcess)
]
for p in ps:
if p.exists():
p.wait(6)
p.close()
else:
print("未启动鲁班协作")
else:
raise Exception("未打开用户登录窗口")
def quit_BECivil(self):
"""退出BECivil"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
m1 = MouseControl()
w0.wait(3)
m1.click(self.BECivilWin, '', 1900, 13)
if w0.exists():
w0.wait(3)
t = w0.getPos()
if t == (845, 438, 1075, 602):
pass
else:
raise Exception('Something went wrong.')
sleep(1)
w0.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception('未弹出确认关闭软件窗口')
else:
raise Exception('未识别BECivil打开的窗口')
sleep(5)
if w0.exists():
raise Exception('关闭软件未成功')
else:
pass
def sand_table_pattern(self):
"""沙盘模式"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.沙盘[0],
screen_point.沙盘[1])
m1.click(self.BECivilWin, '', screen_point.沙盘模式[0],
screen_point.沙盘模式[1])
sleep(2)
w1 = WinControl('欢迎使用沙盘功能')
if w1.exists():
w1.wait(3)
w1.controlClick('[CLASS:Button; INSTANCE:3]')
sleep(1)
# 设置开工和竣工时间
m1.click('欢迎使用沙盘功能', '', 890, 640)
sleep(3)
w2 = WinControl('工程时间')
if w2.exists():
w2.wait(3)
w2.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception('未能打开工程时间窗口')
sleep(1)
w1.controlClick('[CLASS:Button; INSTANCE:3]')
sleep(2)
# 设置监控服务
m1.click('欢迎使用沙盘功能', '', 830, 640)
sleep(3)
w3 = WinControl('第三方监控服务设置')
if w3.exists():
w3.wait(3)
# 选择对接平台
m1.click('第三方监控服务设置', '', 950, 460)
m1.click('第三方监控服务设置', '', 950, 480)
w3.controlSetText('[CLASS:Edit; INSTANCE:1]',
self.messgae1)
w3.controlSetText('[CLASS:Edit; INSTANCE:2]',
self.messgae2)
w3.controlSetText('[CLASS:Edit; INSTANCE:3]',
self.messgae3)
w3.controlSetText('[CLASS:Edit; INSTANCE:4]',
self.messgae4)
sleep(1)
w3.controlClick('[CLASS:Button; INSTANCE:2]')
sleep(12)
if w0.exists():
w0.wait(3)
t = w0.getPos()
if t == (868, 438, 1052, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception('未能成功设置监控服务')
w1.controlClick('[CLASS:Button; INSTANCE:3]')
sleep(1)
w1.controlClick('[CLASS:Button; INSTANCE:3]')
sleep(1)
w1.controlClick('[CLASS:Button; INSTANCE:3]')
sleep(1)
w1.controlClick('[CLASS:Button; INSTANCE:3]')
else:
raise Exception('未能打开第三方监控服务设置')
else:
raise Exception('未能打开欢迎使用沙盘功能')
else:
raise Exception("未识别BECivil窗口")
def viewing_reports(self):
"""查看报表"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.数据[0],
screen_point.数据[1])
m1.click(self.BECivilWin, '', screen_point.查看报表[0],
screen_point.查看报表[1])
sleep(2)
w1 = WinControl('报表（Civil）')
if w1.exists():
w1.wait(3)
# 条件统计
m1.click('报表（Civil）', '', 40, 70)
sleep(1)
w2 = WinControl('条件统计')
if w2.exists():
w2.wait(3)
# 勾选全部楼层
m1.click('条件统计', '', 740, 410)
sleep(1)
# 勾选全部构件
m1.click('条件统计', '', 975, 410)
sleep(1)
w2.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未打开条件统计窗口")
# 选中构件
m1.click('报表（Civil）', '', 860, 260, clicks=2)
# 点击反查
m1.click('报表（Civil）', '', 100, 70)
sleep(2)
w3 = WinControl('反查结果')
if w3.exists():
w3.wait(3)
sleep(2)
w3.controlClick('[CLASS:Button; INSTANCE:3]')
else:
raise Exception("未打开反查结果窗口")
sleep(1)
# 打印预览
m1.click('报表（Civil）', '', 290, 70)
sleep(2)
w4 = WinControl('打印预览 - 你的报表标题')
if w4.exists():
w4.wait(3)
# 退出打印预览
m1.click('打印预览 - 你的报表标题', '', 1890, 10)
else:
raise Exception('未打开打印预览窗口')
sleep(2)
# 导出Excel
m1.click('报表（Civil）', '', 360, 70)
sleep(2)
w5 = WinControl('另存为')
if w5.exists():
w5.wait(3)
w5.setState(3)
m1.click('另存为', '', 860, 45)
w5.controlSetText('[CLASS:Edit; INSTANCE:2]',
self.downloadaddress)
autoit.send("{ENTER}")
sleep(2)
w5.controlClick('[CLASS:Button; INSTANCE:1]')
sleep(2)
w6 = WinControl('确认另存为')
if w6.exists():
w6.wait(3)
w6.controlClick('[CLASS:Button; INSTANCE:1]')
else:
pass
else:
raise Exception("未打开另存为窗口")
sleep(15)
w7 = WinControl('测试脚本用安装工程.YS_清单定额汇总表.xls [兼容模式] - Excel')
if w7.exists():
w7.wait(3)
w7.setState(3)
sleep(3)
# 关闭自动打开的Excel
m1.click('测试脚本用安装工程.YS_清单定额汇总表.xls [兼容模式] - Excel', '',
1905, 12)
else:
raise Exception("未打开Excel")
sleep(2)
# 导出PDF
m1.click('报表（Civil）', '', 435, 70)
sleep(2)
w8 = WinControl('另存为')
if w8.exists():
w8.wait(3)
w8.setState(3)
m1.click('另存为', '', 860, 45)
w8.controlSetText('[CLASS:Edit; INSTANCE:2]',
self.downloadaddress)
autoit.send("{ENTER}")
sleep(2)
w5.controlClick('[CLASS:Button; INSTANCE:1]')
sleep(2)
w9 = WinControl('确认另存为')
if w9.exists():
w9.wait(3)
w9.controlClick('[CLASS:Button; INSTANCE:1]')
else:
pass
else:
raise Exception("未打开另存为窗口")
sleep(7)
w10 = WinControl(
'你的报表标题 - 测试脚本用安装工程.YS_清单定额汇总表.pdf - Mozilla Firefox')
if w10.exists():
w10.wait(3)
w10.setState(3)
sleep(3)
# 关闭自动打开的Excel
m1.click(
'你的报表标题 - 测试脚本用安装工程.YS_清单定额汇总表.pdf - Mozilla Firefox',
'', 1893, 7)
sleep(2)
w11 = WinControl("确认关闭")
if w11.exists():
w11.wait(3)
autoit.send("{ENTER}")
else:
raise Exception("未打开PDF")
sleep(1)
# 报表管理
m1.click('报表（Civil）', '', 500, 70)
sleep(2)
w12 = WinControl('报表管理')
if w12.exists():
w12.wait(3)
w12.controlClick('[CLASS:Button; INSTANCE:4]')
sleep(2)
w13 = WinControl('打开')
if w13.exists():
w13.wait(3)
m1.click('打开', '', 1030, 45)
w13.controlSetText('[CLASS:Edit; INSTANCE:2]',
self.uploadaddress)
sleep(1)
autoit.send("{ENTER}")
w13.controlSetText('[CLASS:Edit; INSTANCE:1]',
'测试脚本用上传报表.xlsx')
sleep(1)
w13.controlClick("[CLASS:Button; INSTANCE:1]")
sleep(5)
w14 = WinControl('上传报表')
if w14.exists():
w14.wait(3)
w14.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception('未打开上传报表窗口')
else:
raise Exception("未打开打开窗口")
# 关闭报表管理
m1.click('报表管理', '', 1314, 243)
sleep(2)
else:
raise Exception('未打开报表管理窗口')
# 关闭报表窗口
m1.click('报表（Civil）', '', 1895, 5)
else:
raise Exception('未打开报表（Civil）窗口')
else:
raise Exception('未识别BECivil窗口')
def information_management(self):
"""资料管理"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.资料[0],
screen_point.资料[1])
m1.click(self.BECivilWin, '', screen_point.资料管理[0],
screen_point.资料管理[1])
w1 = WinControl('资料管理')
sleep(3)
if w1.exists():
w1.wait(3)
w1.setState(3)
# 关联
m1.click('资料管理', '', 1695, 160)
sleep(1)
w2 = WinControl(' 设置资料信息')
if w2.exists():
w2.wait(3)
w2.controlClick('[CLASS:Button; INSTANCE:6]')
m1.click(' 设置资料信息', '', 805, 440)
sleep(2)
w2.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception('未打开设置资料信息窗口')
sleep(2)
w1.setState(3)
# 反查
m1.click('资料管理', '', 1785, 160)
sleep(1)
if w0.exists():
w0.wait(3)
t1 = w0.getPos()
if t1 == (0, 0, 1920, 1040):
pass
else:
raise Exception('Something went wrong.')
sleep(2)
# 退出反查
m1.click(self.BECivilWin, '', 1100, 490, button='right')
sleep(0.5)
m1.click(self.BECivilWin, '', 1170, 505)
sleep(2)
if w1.exists():
w1.wait(3)
w1.setState(3)
else:
raise Exception('退出反查失败')
else:
raise Exception('反查失败')
sleep(2)
# 下载
m1.click('资料管理', '', 1835, 160)
sleep(2)
w3 = WinControl('另存为')
if w3.exists():
w3.wait(3)
m1.click('另存为', '', 1030, 45)
w3.controlSetText('[CLASS:Edit; INSTANCE:2]',
self.downloadaddress)
sleep(1)
w3.controlClick('[CLASS:Button; INSTANCE:1]')
sleep(1)
w4 = WinControl('确认另存为')
if w4.exists():
w4.wait(3)
w4.controlClick('[CLASS:Button; INSTANCE:1]')
else:
pass
else:
raise Exception('未打开另存为窗口')
# 勾选上传资料
m1.click('资料管理', '', 425, 160)
sleep(1)
# 关联
w1.controlClick('[CLASS:Button; INSTANCE:6]')
sleep(1)
if w2.exists():
w2.wait(3)
w2.controlClick('[CLASS:Button; INSTANCE:3]')
sleep(2)
w2.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception('未打开设置资料信息窗口')
sleep(3)
w1.setState(3)
# 勾选上传资料
m1.click('资料管理', '', 425, 160)
# 打印
w1.controlClick('[CLASS:Button; INSTANCE:7]')
sleep(1)
w5 = WinControl('打印')
if w5.exists():
w5.wait(3)
w5.controlClick('[CLASS:Button; INSTANCE:14]')
else:
raise Exception('未打开打印窗口')
sleep(3)
w1.setState(3)
# 删除
w1.controlClick('[CLASS:Button; INSTANCE:8]')
sleep(2)
if w0.exists():
w0.wait(3)
t2 = w0.getPos()
if t2 == (844, 438, 1076, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception('删除未成功')
sleep(3)
w1.setState(3)
# 关闭资料管理窗口
m1.click('资料管理', '', 1905, 10)
else:
raise Exception('未打开资料管理窗口')
else:
raise Exception('未识别BECivil窗口')
def measure_report(self):
"""监测报告"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.任务[0], screen_point.任务[1])
m1.click(self.BECivilWin, '', screen_point.监测报告[0], screen_point.监测报告[1])
sleep(1)
# 创建报告
m1.click(self.BECivilWin, '', 1190, 270)
sleep(1)
w1 = WinControl("新建报告")
if w1.exists():
w1.wait(3)
# 报告名称
m1.click('新建报告', '', 980, 400)
autoit.send('测试脚本用报告')
# 期号
m1.click('新建报告', '', 980, 440)
autoit.send('1')
# 编号
m1.click('新建报告', '', 980, 480)
autoit.send('123456')
# 承包单位
m1.click('新建报告', '', 980, 570)
autoit.send('测试脚本用承包单位')
# 监理单位
m1.click('新建报告', '', 980, 615)
autoit.send('测试脚本用监理单位')
sleep(1)
w1.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception('未打开新建报告窗口')
# 点击名称
m1.click(self.BECivilWin, '', 1320, 340)
sleep(2)
w2 = WinControl("表单列表")
if w2.exists():
w2.wait(3)
w2.controlClick("[CLASS:Button; INSTANCE:1]")
sleep(1)
MissionFunctions().add_form()
sleep(1)
w2.controlClick("[CLASS:Button; INSTANCE:1]")
sleep(1)
MissionFunctions().add_form(565, '脚本测试用监测成果分析报告')
m1.click('表单列表', '', 1260, 235)
else:
raise Exception('未打开表单列表窗口')
# 点击编辑
m1.click(self.BECivilWin, '', 1800, 340)
sleep(1)
w3 = WinControl("编辑报告")
if w3.exists():
w3.wait(3)
m1.click('编辑报告', '', 960, 400)
autoit.send('测试脚本用报告更改')
sleep(1)
w3.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未打开编辑报告窗口")
# 点击导出
m1.click(self.BECivilWin, '', 1860, 340)
sleep(1)
w4 = WinControl('另存为')
if w4.exists():
w4.wait(3)
m1.click('另存为', '', 1030, 45)
w4.controlSetText("[CLASS:Edit; INSTANCE:2]", self.downloadaddress)
sleep(1)
w4.controlClick('[CLASS:Button; INSTANCE:1]')
sleep(1)
w5 = WinControl('确认另存为')
if w5.exists():
w5.wait(3)
w5.controlClick("[CLASS:Button; INSTANCE:1]")
else:
pass
sleep(2)
if w0.exists():
w0.wait(3)
t1 = w0.getPos()
if t1 == (845, 438, 1075, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick("[CLASS:Button; INSTANCE:2]")
else:
pass
else:
raise Exception('未成功导出报告')
sleep(2)
# 全部勾选报告
m1.click(self.BECivilWin, '', 1172, 340)
sleep(1)
# 删除
m1.click(self.BECivilWin, '', 1290, 270)
sleep(1)
if w0.exists():
w0.wait(3)
t2 = w0.getPos()
if t2 == (845, 438, 1075, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception('删除报告失败')
sleep(1)
m1.click(self.BECivilWin, '', screen_point.监测报告[0], screen_point.监测报告[1])
else:
raise Exception('未识别市政窗口')
def upload_picture(self):
""" """
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.沙盘[0],
screen_point.沙盘[1])
m1.click(self.BECivilWin, '', screen_point.上传图片[0],
screen_point.上传图片[1])
sleep(1)
w1 = WinControl('打开')
if w1.exists():
w1.wait(3)
m1.click('打开', '', 1110, 45)
sleep(1)
w1.controlSetText('[CLASS:Edit; INSTANCE:2]',
self.uploadaddress)
autoit.send("{ENTER}")
sleep(1)
w1.controlSetText('[CLASS:Edit; INSTANCE:1]', r'picture1.jpg')
sleep(1)
w1.controlClick("[CLASS:Button; INSTANCE:1]")
sleep(3)
if w0.exists():
w0.wait(3)
t = w0.getPos()
if t == (874, 438, 1046, 602):
pass
else:
raise Exception('Something went wrong.')
w0.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未弹出上传成功窗口")
else:
raise Exception("未弹出打开窗口")
else:
raise Exception("未识别BECivil窗口")
def creat_contract_management(self):
# 新增合同
if WinControl(self.IMWin).exists():
m1 = MouseControl()
m1.click(self.IMWin, '', screen_point.选择项目部[0],
screen_point.选择项目部[1])
sleep(1)
m1.click(self.IMWin, '', screen_point.工程管理[0],
screen_point.工程管理[1])
m1.click(self.IMWin, '', screen_point.合同管理[0],
screen_point.合同管理[1])
m1.click(self.IMWin, '', screen_point.新增施工合同[0],
screen_point.新增施工合同[1])
sleep(5)
m1.click(self.IMWin, '', screen_point.合同编号[0],
screen_point.合同编号[1])
autoit.send(self.message1)
m1.click(self.IMWin, '', screen_point.合同金额[0],
screen_point.合同金额[1])
autoit.send(self.message2)
m1.click(self.IMWin, '', screen_point.合同签订日期[0],
screen_point.合同签订日期[1])
m1.click(self.IMWin, '', screen_point.今天签订[0],
screen_point.今天签订[1])
m1.click(self.IMWin, '', screen_point.建设单位[0],
screen_point.建设单位[1])
autoit.send(self.message3)
m1.click(self.IMWin, '', screen_point.施工单位[0],
screen_point.施工单位[1])
autoit.send(self.message4)
m1.click(self.IMWin, '', screen_point.起止桩号[0],
screen_point.起止桩号[1])
autoit.send(self.message5)
m1.click(self.IMWin, '', screen_point.合同段长度[0],
screen_point.合同段长度[1])
autoit.send(self.message6)
m1.click(self.IMWin, '', screen_point.计划开工日期[0],
screen_point.计划开工日期[1])
m1.click(self.IMWin, '', screen_point.今天开工[0],
screen_point.今天开工[1])
m1.click(self.IMWin, '', screen_point.标段号[0], screen_point.标段号[1])
autoit.send(self.message7)
m1.click(self.IMWin, '', screen_point.项目名称[0],
screen_point.项目名称[1])
autoit.send(self.message8)
m1.click(self.IMWin, '', screen_point.监理名称[0],
screen_point.监理名称[1])
autoit.send(self.message9)
m1.click(self.IMWin, '', screen_point.结束桩号[0],
screen_point.结束桩号[1])
autoit.send(self.message10)
m1.click(self.IMWin, '', screen_point.计划完工日期[0],
screen_point.计划完工日期[1])
m1.click(self.IMWin, '', screen_point.今天完工[0],
screen_point.今天完工[1])
m1.move(self.IMWin, '', 960, 590)
autoit.mouse_wheel('down', 2)
m1.click(self.IMWin, '', screen_point.工期[0], screen_point.工期[1])
autoit.send(self.message11)
m1.click(self.IMWin, '', screen_point.保存[0], screen_point.保存[1])
else:
raise Exception('没有检测到IM窗口！')
def download_porject(self):
"""下载工程"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.系统[0], screen_point.系统[1])
m1.click(self.BECivilWin, '', screen_point.下载工程[0], screen_point.下载工程[1])
sleep(2)
w1 = WinControl('浏览文件夹')
if w1.exists():
w1.wait(3)
# 选择下载的目标地址
w1.controlTreeView('[CLASS:SysTreeView32; INSTANCE:1]', 'Select', extra='桌面')
choose_direction(6)
choose_direction(3)
choose_direction(1)
choose_direction(2)
sleep(2)
w1.controlClick('Button1')
if w0.exists():
w0.wait(3)
t = w0.getPos()
# 目标文件夹没有下载过该工程
if t == (0, 0, 1920, 1040):
pass
# 目标文件夹曾经下载过该工程
elif t == (832, 438, 1088, 602):
pass
else:
raise Exception('Something went wrong.')
sleep(2)
w0.controlClick('[CLASS:Button; INSTANCE:1]')
else:
pass
sleep(1)
w2 = WinControl('下载管理器')
if w2.exists():
pass
else:
raise Exception('未弹出下载管理器窗口')
else:
raise Exception("未选中浏览文件夹窗口")
else:
raise Exception("未识别BECivil窗口")
def open_working_set(self):
"""打开工作集"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.系统[0],
screen_point.系统[1])
m1.click(self.BECivilWin, '', screen_point.打开工作集[0],
screen_point.打开工作集[1])
sleep(3)
w1 = WinControl('打开工作集')
if w1.exists():
w1.setState(3)
w1.controlSetText('[CLASS:Edit; INSTANCE:1]', '测试脚本用创建工作集')
sleep(3)
# 打开工作集，因为有时候双击会出现打不开的情况，故设置点击数为3
m1.click('打开工作集', '', 92, 134, clicks=3)
else:
raise Exception("未选中打开工作集窗口")
else:
raise Exception("未识别BECivil窗口")
def local_task(self):
"""本地任务"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.系统[0], screen_point.系统[1])
m1.click(self.BECivilWin, '', screen_point.本地任务[0], screen_point.本地任务[1])
w1 = WinControl(" 本机处理任务")
if w1.exists():
w1.wait(3)
w1.setState(3)
# 历史记录
m1.click(" 本机处理任务", '', 85, 30)
# 删除此次上传的两条记录
for i in range(2):
m1.click(" 本机处理任务", '', 50, 90)
w1.controlClick('Button1')
if w0.exists():
w0.waitActive(3)
# 识别确定删除窗口关联的进程ID
t = w0.getPos()
if t == (845, 438, 1075, 602):
pass
else:
raise Exception("未成功删除该任务")
sleep(1)
w0.controlClick('Button1')
sleep(1)
else:
raise Exception("未成功删除该任务")
sleep(1)
# 关闭本机处理任务
m1.click(" 本机处理任务", '', 1905, 5)
else:
raise Exception("未选中本机任务窗口")
else:
raise Exception("未识别BECivil窗口")
def sand_table_cockpit(self):
"""沙盘驾驶舱"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.沙盘[0],
screen_point.沙盘[1])
m1.click(self.BECivilWin, '', screen_point.沙盘模式[0],
screen_point.沙盘模式[1])
m1.click(self.BECivilWin, '', screen_point.沙盘驾驶舱[0],
screen_point.沙盘驾驶舱[1])
sleep(3)
w1 = WinControl(" 沙盘驾驶舱")
if w1.exists():
w1.wait(3)
# 播放
m1.click(' 沙盘驾驶舱', '', 190, 970)
sleep(3)
# 刷新
m1.click(' 沙盘驾驶舱', '', 450, 40)
sleep(3)
if w0.exists():
w0.wait(3)
t = w0.getPos()
if t == (838, 438, 1082, 602):
pass
else:
raise Exception('Something went wrong.')
sleep(1)
w0.controlClick("[CLASS:Button; INSTANCE:1]")
else:
raise Exception("未弹出刷新完成窗口")
# 关闭沙盘驾驶舱窗口
m1.click(' 沙盘驾驶舱', '', 1905, 10)
else:
raise Exception("未打开沙盘驾驶舱窗口")
else:
raise Exception("未识别BECivil窗口")
def upload_information(self):
"""上传资料"""
w0 = WinControl(self.BECivilWin)
if w0.exists():
w0.wait(3)
m1 = MouseControl()
m1.click(self.BECivilWin, '', screen_point.资料[0],
screen_point.资料[1])
m1.click(self.BECivilWin, '', screen_point.上传资料[0],
screen_point.上传资料[1])
w1 = WinControl('上传资料')
sleep(3)
if w1.exists():
w1.wait(3)
w1.setState(3)
'''
# 因删除上传资料的文件夹在BECivil上是有bug的，服务器说要等到下个版本发版的时候再改，所以新增删除文件夹这一块暂时注掉
m1.click('上传资料', '', 40, 90, button='right')
sleep(1)
m1.click('上传资料', '', 100, 105)
m1.click('上传资料', '', 40, 90)# 点击全部
sleep(1)
w1.controlClick('[CLASS:Button; INSTANCE:9]')
sleep(1)
w2 = WinControl('文件夹新建')
if w2.exists():
w2.wait(3)
w2.controlSetText('[CLASS:Edit; INSTANCE:1]', '测试脚本用上传文件夹')
sleep(1)
w2.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception("未打开新建文件夹窗口")
'''
# 点击新建文件夹
m1.click('上传资料', '', 60, 110)
sleep(1)
w1.controlClick('[CLASS:Button; INSTANCE:11]')
sleep(3)
w3 = WinControl('授权人员')
if w3.exists():
w3.wait(3)
w3.controlSetText('[CLASS:Edit; INSTANCE:1]', 'xushenwei')
w3.controlClick('[CLASS:Button; INSTANCE:5]')
sleep(1)
# 勾选授权人员
m1.click('授权人员', '', 870, 420)
w3.controlClick('[CLASS:Button; INSTANCE:2]')
else:
raise Exception("未打开授权人员窗口")
sleep(1)
# 本地资料
w1.controlClick('[CLASS:Button; INSTANCE:14]')
sleep(2)
w4 = WinControl('打开')
if w4.exists():
w4.wait(3)
w4.setState(3)
m1.click('打开', '', 970, 50)
w4.controlSetText('[CLASS:Edit; INSTANCE:2]',
self.uploadaddress)
autoit.send("{ENTER}")
w4.controlSetText('[CLASS:Edit; INSTANCE:1]',
r'上传测试资料.txt')
sleep(2)
w4.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception("上传资料未成功")
sleep(4)
# 关联
m1.click('上传资料', '', 1800, 110)
sleep(2)
w5 = WinControl(' 设置资料信息')
if w5.exists():
w5.wait(3)
# 点击标签
m1.click(' 设置资料信息', '', 840, 260)
w5.controlSetText('[CLASS:ListBox; INSTANCE:1]', '测试脚本用标签')
w5.controlClick('[CLASS:Button; INSTANCE:14]')
m1.click(' 设置资料信息', '', 790, 335)
sleep(1)
w5.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception("未打开关联资料窗口")
# 查看
m1.click('上传资料', '', 1840, 110)
sleep(2)
w6 = WinControl('上传测试资料.txt - 记事本')
if w6.exists():
w6.wait(3)
w6.setState(3)
sleep(1)
m1.click('上传测试资料.txt - 记事本', '', 1890, 10)
else:
raise Exception('未打开上传的资料')
'''
m1.click('上传资料', '', 1880, 110)
sleep(1)
if w0.exists():
w0.wait(3)
w0.controlClick('[CLASS:Button; INSTANCE:1]')
else:
raise Exception("未成功删除上传资料")
'''
# 关闭上传资料窗口
m1.click('上传资料', '', 1905, 10)
else:
raise Exception("未打开上传资料窗口")
else:
raise Exception('未识别BECivil窗口')
