def join_batman_network(password='******',
interface='wlan2',
network_name='batmesh',
ap_mac='02:12:34:56:78:9A',
gw_ip='192.168.2.4',
channel='1'):
'''Create a BATMAN network using Raspbian.
ARGS:
@network_name -- The name of the network you would like to create
@ap_mac -- The MAC address to assign the Access Point
@channel -- The channel number to join (STRING or INT)
RETURN:
None
'''
import time
from batman_setup import load_batman
from run_command import run_command
load_batman.load_batman(password)
run_command('sudo /etc/init.d/network-manager stop', password)
# Configure wlan0 to have a Maximum Transmission Unit to 1532 frames
# This is standard for BATMAN-Advanced. Most protocols only require
# 1500 frames, but BATMAN-Advanced uses the spare 32 frames to append
# its header.
run_command('sudo ifconfig ' + interface + ' mtu 1532', password)
# Configure wlan0 with the specifications given.
run_command(
'sudo ifconfig ' + interface + ' down && ' + 'sudo iwconfig ' +
interface + ' mode ad-hoc essid ' + network_name + ' ap ' + ap_mac +
' channel ' + str(channel), password)
# Add wlan0 to the list of BATMAN-Advanced available interfaces, then
# start wlan0 and the corresponding BATMAN-Advanced interface.
run_command('sudo batctl if add ' + interface, password)
run_command('sudo ifconfig ' + interface + ' up', password)
run_command('sudo ifconfig bat0 up', password)
run_command('sudo ifconfig bat0 192.168.2.15', password)
run_command('sudo route add default gw ' + gw_ip, password)
run_command('sudo batctl gw_mode client', password)
with open('/etc/resolv.conf', 'rt') as f:
text = f.read()
if text.find('nameserver 8.8.8.8') == -1:
text = text + '\nnameserver 8.8.8.8\n'
if text.find('nameserver 8.8.4.4') == -1:
text = text + 'nameserver 8.8.4.4\n'
with open('/tmp/etc_resolv.tmp', 'wt') as temp:
temp.write(text)
run_command('sudo mv /tmp/etc_resolv.tmp /etc/resolv.conf')
def join_batman_network(password = '******',
interface = 'wlan2',
network_name = 'batmesh',
ap_mac = '02:12:34:56:78:9A',
gw_ip = '192.168.2.4',
channel = '1'):
'''Create a BATMAN network using Raspbian.
ARGS:
@network_name -- The name of the network you would like to create
@ap_mac -- The MAC address to assign the Access Point
@channel -- The channel number to join (STRING or INT)
RETURN:
None
'''
import time
from batman_setup import load_batman
from run_command import run_command
load_batman.load_batman(password)
run_command('sudo /etc/init.d/network-manager stop', password)
# Configure wlan0 to have a Maximum Transmission Unit to 1532 frames
# This is standard for BATMAN-Advanced. Most protocols only require
# 1500 frames, but BATMAN-Advanced uses the spare 32 frames to append
# its header.
run_command('sudo ifconfig ' + interface + ' mtu 1532', password)
# Configure wlan0 with the specifications given.
run_command('sudo ifconfig ' + interface + ' down && ' +
'sudo iwconfig ' + interface + ' mode ad-hoc essid '
+ network_name + ' ap ' + ap_mac + ' channel ' +
str(channel), password)
# Add wlan0 to the list of BATMAN-Advanced available interfaces, then
# start wlan0 and the corresponding BATMAN-Advanced interface.
run_command('sudo batctl if add ' + interface, password)
run_command('sudo ifconfig ' + interface + ' up', password)
run_command('sudo ifconfig bat0 up', password)
run_command('sudo ifconfig bat0 192.168.2.15', password)
run_command('sudo route add default gw ' + gw_ip, password)
run_command('sudo batctl gw_mode client', password)
with open('/etc/resolv.conf', 'rt') as f:
text = f.read()
if text.find('nameserver 8.8.8.8') == -1:
text = text + '\nnameserver 8.8.8.8\n'
if text.find('nameserver 8.8.4.4') == -1:
text = text + 'nameserver 8.8.4.4\n'
with open('/tmp/etc_resolv.tmp', 'wt') as temp:
temp.write(text)
run_command('sudo mv /tmp/etc_resolv.tmp /etc/resolv.conf')
def join_batman_network(network_name = 'squids_network',
ap_mac = '02:12:34:56:78:9A',
channel = '1'):
'''Create a BATMAN network using Raspbian.
ARGS:
@network_name -- The name of the network you would like to create
@ap_mac -- The MAC address to assign the Access Point
@channel -- The channel number to join (STRING or INT)
RETURN:
None
'''
import sys
import time
sys.path.append('..')
from batman_setup import load_batman
from run_command import run_command
load_batman.load_batman()
# Configure wlan0 to have a Maximum Transmission Unit to 1532 frames
# This is standard for BATMAN-Advanced. Most protocols only require
# 1500 frames, but BATMAN-Advanced uses the spare 32 frames to append
# its header.
run_command('sudo ip link set up dev eth0')
run_command('sudo ip link set mtu 1532 dev wlan0')
# Configure wlan0 with the specifications given.
run_command('sudo ifconfig wlan0 down && sudo iwconfig wlan0 mode ad-hoc ' +
'essid ' + network_name + ' ap ' + ap_mac + ' channel ' + str(channel))
# Add wlan0 to the list of BATMAN-Advanced available interfaces, then
# start wlan0 and the corresponding BATMAN-Advanced interface.
run_command('sudo batctl if add wlan0')
run_command('sudo ip link set up dev wlan0')
run_command('sudo ip link set up dev bat0')
run_command('sudo batctl gw_mode client')
