Exemplo n.º 1
0
def test_reverter():
    c = tester.Chain()
    x = c.contract(reverter_code, value=10**15, language='serpent')
    x.entry()
    assert c.head_state.get_storage_data(x.address, 8080) == 4040
    assert c.head_state.get_balance(utils.int_to_addr(5050)) == 9
    assert c.head_state.get_storage_data(x.address, 8081) == 0
    assert c.head_state.get_balance(utils.int_to_addr(5051)) == 0
Exemplo n.º 2
0
def test_crowdfund():
    c = tester.Chain()
    x = c.contract(crowdfund_code, language='serpent')
    # Create a campaign with id 100
    x.create_campaign(100, 45, 100000, 2)
    # Create a campaign with id 200
    x.create_campaign(200, 48, 100000, 2)
    # Make some contributions
    x.contribute(100, value=1, sender=tester.k1)
    assert 1 == x.progress_report(100)
    x.contribute(200, value=30000, sender=tester.k2)
    x.contribute(100, value=59049, sender=tester.k3)
    assert 59050 == x.progress_report(100)
    x.contribute(200, value=70001, sender=tester.k4)
    # Expect the 100001 units to be delivered to the destination
    # account for campaign 2
    assert 100001 == c.head_state.get_balance(utils.int_to_addr(48))
    mida1 = c.head_state.get_balance(tester.a1)
    mida3 = c.head_state.get_balance(tester.a3)
    # Mine 5 blocks to expire the campaign
    c.mine(5)
    # Ping the campaign after expiry
    x.contribute(100, value=1)
    # Expect refunds
    assert mida1 + 1 == c.head_state.get_balance(tester.a1)
    assert mida3 + 59049 == c.head_state.get_balance(tester.a3)
Exemplo n.º 3
0
def validator_inject(state,
                     vcode,
                     deposit_size,
                     randao_commitment,
                     address,
                     nonce=0,
                     ct=None):
    if not ct:
        ct = get_casper_ct()
    state.set_balance(utils.int_to_addr(1), deposit_size)
    t = Transaction(nonce, 0, 10**8, casper_config['CASPER_ADDR'],
                    deposit_size,
                    ct.encode('deposit', [vcode, randao_commitment, address]))
    t._sender = utils.int_to_addr(1)
    success, output = apply_transaction(state, t)
    assert success
Exemplo n.º 4
0
def vm_execute(ext, msg, code):
    # precompute trace flag
    # if we trace vm, we're in slow mode anyway
    trace_vm = log_vm_op.is_active('trace')

    compustate = Compustate(gas=msg.gas)
    stk = compustate.stack
    mem = compustate.memory

    if code in code_cache:
        processed_code = code_cache[code]
    else:
        processed_code = preprocess_code(code)
        code_cache[code] = processed_code
        # print(processed_code.keys(), code)

    codelen = len(code)

    s = time.time()
    steps = 0
    _prevop = None  # for trace only

    while compustate.pc in processed_code:
        ops, minstack, maxstack, totgas, nextpos = processed_code[
            compustate.pc]

        if len(compustate.stack) < minstack:
            return vm_exception('INSUFFICIENT STACK')
        if len(compustate.stack) > maxstack:
            return vm_exception('STACK SIZE LIMIT EXCEEDED')
        if totgas > compustate.gas:
            return vm_exception('OUT OF GAS %d %d' % (totgas, compustate.gas))
        jumped = False

        compustate.gas -= totgas
        compustate.pc = nextpos

        # Invalid operation; can only come at the end of a chunk
        if ops[-1][0] == 'INVALID':
            return vm_exception('INVALID OP', opcode=ops[-1][1])

        for op, opcode, pushval in ops:

            if trace_vm:
                """
                This diverges from normal logging, as we use the logging namespace
                only to decide which features get logged in 'bible.vm.op'
                i.e. tracing can not be activated by activating a sub
                like 'bible.vm.op.stack'
                """
                trace_data = {}
                trace_data['stack'] = list(
                    map(to_string, list(compustate.stack)))
                if _prevop in ('MLOAD', 'MSTORE', 'MSTORE8', 'SHA3', 'CALL',
                               'CALLCODE', 'CREATE', 'CALLDATACOPY',
                               'CODECOPY', 'EXTCODECOPY'):
                    if len(compustate.memory) < 1024:
                        trace_data['memory'] = \
                            ''.join([encode_hex(ascii_chr(x)) for x
                                     in compustate.memory])
                    else:
                        trace_data['sha3memory'] = \
                            encode_hex(utils.sha3(b''.join([ascii_chr(x) for
                                                            x in compustate.memory])))
                if _prevop in ('SSTORE', ) or steps == 0:
                    trace_data['storage'] = ext.log_storage(msg.to)
                trace_data['gas'] = to_string(compustate.gas + totgas)
                trace_data['inst'] = opcode
                trace_data['pc'] = to_string(compustate.pc - 1)
                if steps == 0:
                    trace_data['depth'] = msg.depth
                    trace_data['address'] = msg.to
                trace_data['steps'] = steps
                trace_data['depth'] = msg.depth
                if op[:4] == 'PUSH':
                    trace_data['pushvalue'] = pushval
                log_vm_op.trace('vm', op=op, **trace_data)
                steps += 1
                _prevop = op

            # Valid operations
            # Pushes first because they are very frequent
            if 0x60 <= opcode <= 0x7f:
                # compustate.pc += opcode - 0x5f # Move 1 byte forward for
                # 0x60, up to 32 bytes for 0x7f
                stk.append(pushval)
            elif opcode < 0x10:
                if op == 'STOP':
                    return peaceful_exit('STOP', compustate.gas, [])
                elif op == 'ADD':
                    stk.append((stk.pop() + stk.pop()) & TT256M1)
                elif op == 'SUB':
                    stk.append((stk.pop() - stk.pop()) & TT256M1)
                elif op == 'MUL':
                    stk.append((stk.pop() * stk.pop()) & TT256M1)
                elif op == 'DIV':
                    s0, s1 = stk.pop(), stk.pop()
                    stk.append(0 if s1 == 0 else s0 // s1)
                elif op == 'MOD':
                    s0, s1 = stk.pop(), stk.pop()
                    stk.append(0 if s1 == 0 else s0 % s1)
                elif op == 'SDIV':
                    s0, s1 = utils.to_signed(stk.pop()), utils.to_signed(
                        stk.pop())
                    stk.append(0 if s1 == 0 else (abs(s0) // abs(s1) *
                                                  (-1 if s0 * s1 < 0 else 1))
                               & TT256M1)
                elif op == 'SMOD':
                    s0, s1 = utils.to_signed(stk.pop()), utils.to_signed(
                        stk.pop())
                    stk.append(0 if s1 == 0 else (abs(s0) % abs(s1) *
                                                  (-1 if s0 < 0 else 1))
                               & TT256M1)
                elif op == 'ADDMOD':
                    s0, s1, s2 = stk.pop(), stk.pop(), stk.pop()
                    stk.append((s0 + s1) % s2 if s2 else 0)
                elif op == 'MULMOD':
                    s0, s1, s2 = stk.pop(), stk.pop(), stk.pop()
                    stk.append((s0 * s1) % s2 if s2 else 0)
                elif op == 'EXP':
                    base, exponent = stk.pop(), stk.pop()
                    # fee for exponent is dependent on its bytes
                    # calc n bytes to represent exponent
                    nbytes = len(utils.encode_int(exponent))
                    expfee = nbytes * opcodes.GEXPONENTBYTE
                    if ext.post_clearing_hardfork():
                        expfee += opcodes.EXP_SUPPLEMENTAL_GAS * nbytes
                    if compustate.gas < expfee:
                        compustate.gas = 0
                        return vm_exception('OOG EXPONENT')
                    compustate.gas -= expfee
                    stk.append(pow(base, exponent, TT256))
                elif op == 'SIGNEXTEND':
                    s0, s1 = stk.pop(), stk.pop()
                    if s0 <= 31:
                        testbit = s0 * 8 + 7
                        if s1 & (1 << testbit):
                            stk.append(s1 | (TT256 - (1 << testbit)))
                        else:
                            stk.append(s1 & ((1 << testbit) - 1))
                    else:
                        stk.append(s1)
            elif opcode < 0x20:
                if op == 'LT':
                    stk.append(1 if stk.pop() < stk.pop() else 0)
                elif op == 'GT':
                    stk.append(1 if stk.pop() > stk.pop() else 0)
                elif op == 'SLT':
                    s0, s1 = utils.to_signed(stk.pop()), utils.to_signed(
                        stk.pop())
                    stk.append(1 if s0 < s1 else 0)
                elif op == 'SGT':
                    s0, s1 = utils.to_signed(stk.pop()), utils.to_signed(
                        stk.pop())
                    stk.append(1 if s0 > s1 else 0)
                elif op == 'EQ':
                    stk.append(1 if stk.pop() == stk.pop() else 0)
                elif op == 'ISZERO':
                    stk.append(0 if stk.pop() else 1)
                elif op == 'AND':
                    stk.append(stk.pop() & stk.pop())
                elif op == 'OR':
                    stk.append(stk.pop() | stk.pop())
                elif op == 'XOR':
                    stk.append(stk.pop() ^ stk.pop())
                elif op == 'NOT':
                    stk.append(TT256M1 - stk.pop())
                elif op == 'BYTE':
                    s0, s1 = stk.pop(), stk.pop()
                    if s0 >= 32:
                        stk.append(0)
                    else:
                        stk.append((s1 // 256**(31 - s0)) % 256)
            elif opcode < 0x40:
                if op == 'SHA3':
                    s0, s1 = stk.pop(), stk.pop()
                    compustate.gas -= opcodes.GSHA3WORD * \
                        (utils.ceil32(s1) // 32)
                    if compustate.gas < 0:
                        return vm_exception('OOG PAYING FOR SHA3')
                    if not mem_extend(mem, compustate, op, s0, s1):
                        return vm_exception('OOG EXTENDING MEMORY')
                    data = bytearray_to_bytestr(mem[s0:s0 + s1])
                    stk.append(utils.big_endian_to_int(utils.sha3(data)))
                elif op == 'ADDRESS':
                    stk.append(utils.coerce_to_int(msg.to))
                elif op == 'BALANCE':
                    if ext.post_anti_dos_hardfork():
                        if not eat_gas(compustate,
                                       opcodes.BALANCE_SUPPLEMENTAL_GAS):
                            return vm_exception("OUT OF GAS")
                    addr = utils.coerce_addr_to_hex(stk.pop() % 2**160)
                    stk.append(ext.get_balance(addr))
                elif op == 'ORIGIN':
                    stk.append(utils.coerce_to_int(ext.tx_origin))
                elif op == 'CALLER':
                    stk.append(utils.coerce_to_int(msg.sender))
                elif op == 'CALLVALUE':
                    stk.append(msg.value)
                elif op == 'CALLDATALOAD':
                    stk.append(msg.data.extract32(stk.pop()))
                elif op == 'CALLDATASIZE':
                    stk.append(msg.data.size)
                elif op == 'CALLDATACOPY':
                    mstart, dstart, size = stk.pop(), stk.pop(), stk.pop()
                    if not mem_extend(mem, compustate, op, mstart, size):
                        return vm_exception('OOG EXTENDING MEMORY')
                    if not data_copy(compustate, size):
                        return vm_exception('OOG COPY DATA')
                    msg.data.extract_copy(mem, mstart, dstart, size)
                elif op == 'CODESIZE':
                    stk.append(len(code))
                elif op == 'CODECOPY':
                    mstart, dstart, size = stk.pop(), stk.pop(), stk.pop()
                    if not mem_extend(mem, compustate, op, mstart, size):
                        return vm_exception('OOG EXTENDING MEMORY')
                    if not data_copy(compustate, size):
                        return vm_exception('OOG COPY DATA')
                    for i in range(size):
                        if dstart + i < len(code):
                            mem[mstart + i] = utils.safe_ord(code[dstart + i])
                        else:
                            mem[mstart + i] = 0
                elif op == 'RETURNDATACOPY':
                    mstart, dstart, size = stk.pop(), stk.pop(), stk.pop()
                    if not mem_extend(mem, compustate, op, mstart, size):
                        return vm_exception('OOG EXTENDING MEMORY')
                    if not data_copy(compustate, size):
                        return vm_exception('OOG COPY DATA')
                    if dstart + size > len(compustate.last_returned):
                        return vm_exception('RETURNDATACOPY out of range')
                    mem[mstart:mstart + size] = compustate.last_returned
                elif op == 'RETURNDATASIZE':
                    stk.append(len(compustate.last_returned))
                elif op == 'GASPRICE':
                    stk.append(ext.tx_gasprice)
                elif op == 'EXTCODESIZE':
                    if ext.post_anti_dos_hardfork():
                        if not eat_gas(compustate,
                                       opcodes.EXTCODELOAD_SUPPLEMENTAL_GAS):
                            return vm_exception("OUT OF GAS")
                    addr = utils.coerce_addr_to_hex(stk.pop() % 2**160)
                    stk.append(len(ext.get_code(addr) or b''))
                elif op == 'EXTCODECOPY':
                    if ext.post_anti_dos_hardfork():
                        if not eat_gas(compustate,
                                       opcodes.EXTCODELOAD_SUPPLEMENTAL_GAS):
                            return vm_exception("OUT OF GAS")
                    addr = utils.coerce_addr_to_hex(stk.pop() % 2**160)
                    start, s2, size = stk.pop(), stk.pop(), stk.pop()
                    extcode = ext.get_code(addr) or b''
                    assert utils.is_string(extcode)
                    if not mem_extend(mem, compustate, op, start, size):
                        return vm_exception('OOG EXTENDING MEMORY')
                    if not data_copy(compustate, size):
                        return vm_exception('OOG COPY DATA')
                    for i in range(size):
                        if s2 + i < len(extcode):
                            mem[start + i] = utils.safe_ord(extcode[s2 + i])
                        else:
                            mem[start + i] = 0
            elif opcode < 0x50:
                if op == 'BLOCKHASH':
                    if ext.post_metropolis_hardfork() and False:
                        bh_addr = ext.blockhash_store
                        stk.append(ext.get_storage_data(bh_addr, stk.pop()))
                    else:
                        stk.append(
                            utils.big_endian_to_int(ext.block_hash(stk.pop())))
                elif op == 'COINBASE':
                    stk.append(utils.big_endian_to_int(ext.block_coinbase))
                elif op == 'TIMESTAMP':
                    stk.append(ext.block_timestamp)
                elif op == 'NUMBER':
                    stk.append(ext.block_number)
                elif op == 'DIFFICULTY':
                    stk.append(ext.block_difficulty)
                elif op == 'GASLIMIT':
                    stk.append(ext.block_gas_limit)
            elif opcode < 0x60:
                if op == 'POP':
                    stk.pop()
                elif op == 'MLOAD':
                    s0 = stk.pop()
                    if not mem_extend(mem, compustate, op, s0, 32):
                        return vm_exception('OOG EXTENDING MEMORY')
                    stk.append(utils.bytes_to_int(mem[s0:s0 + 32]))
                elif op == 'MSTORE':
                    s0, s1 = stk.pop(), stk.pop()
                    if not mem_extend(mem, compustate, op, s0, 32):
                        return vm_exception('OOG EXTENDING MEMORY')
                    mem[s0:s0 + 32] = utils.encode_int32(s1)
                elif op == 'MSTORE8':
                    s0, s1 = stk.pop(), stk.pop()
                    if not mem_extend(mem, compustate, op, s0, 1):
                        return vm_exception('OOG EXTENDING MEMORY')
                    mem[s0] = s1 % 256
                elif op == 'SLOAD':
                    if ext.post_anti_dos_hardfork():
                        if not eat_gas(compustate,
                                       opcodes.SLOAD_SUPPLEMENTAL_GAS):
                            return vm_exception("OUT OF GAS")
                    stk.append(ext.get_storage_data(msg.to, stk.pop()))
                elif op == 'SSTORE':
                    s0, s1 = stk.pop(), stk.pop()
                    if msg.static:
                        return vm_exception(
                            'Cannot SSTORE inside a static context')
                    if ext.get_storage_data(msg.to, s0):
                        gascost = opcodes.GSTORAGEMOD if s1 else opcodes.GSTORAGEKILL
                        refund = 0 if s1 else opcodes.GSTORAGEREFUND
                    else:
                        gascost = opcodes.GSTORAGEADD if s1 else opcodes.GSTORAGEMOD
                        refund = 0
                    if compustate.gas < gascost:
                        return vm_exception('OUT OF GAS')
                    compustate.gas -= gascost
                    # adds neg gascost as a refund if below zero
                    ext.add_refund(refund)
                    ext.set_storage_data(msg.to, s0, s1)
                elif op == 'JUMP':
                    compustate.pc = stk.pop()
                    opnew = code[
                        compustate.pc] if compustate.pc < codelen else 0
                    jumped = True
                    if opnew != JUMPDEST:
                        return vm_exception('BAD JUMPDEST')
                elif op == 'JUMPI':
                    s0, s1 = stk.pop(), stk.pop()
                    if s1:
                        compustate.pc = s0
                        opnew = code[
                            compustate.pc] if compustate.pc < codelen else 0
                        jumped = True
                        if opnew != JUMPDEST:
                            return vm_exception('BAD JUMPDEST')
                elif op == 'PC':
                    stk.append(compustate.pc - 1)
                elif op == 'MSIZE':
                    stk.append(len(mem))
                elif op == 'GAS':
                    stk.append(compustate.gas)  # AFTER subtracting cost 1
            elif op[:3] == 'DUP':
                # 0x7f - opcode is a negative number, -1 for 0x80 ... -16 for
                # 0x8f
                stk.append(stk[0x7f - opcode])
            elif op[:4] == 'SWAP':
                # 0x8e - opcode is a negative number, -2 for 0x90 ... -17 for
                # 0x9f
                temp = stk[0x8e - opcode]
                stk[0x8e - opcode] = stk[-1]
                stk[-1] = temp

            elif op[:3] == 'LOG':
                """
                0xa0 ... 0xa4, 32/64/96/128/160 + len(data) gas
                a. Opcodes LOG0...LOG4 are added, takes 2-6 stack arguments
                        MEMSTART MEMSZ (TOPIC1) (TOPIC2) (TOPIC3) (TOPIC4)
                b. Logs are kept track of during tx execution exactly the same way as suicides
                   (except as an ordered list, not a set).
                   Each log is in the form [address, [topic1, ... ], data] where:
                   * address is what the ADDRESS opcode would output
                   * data is mem[MEMSTART: MEMSTART + MEMSZ]
                   * topics are as provided by the opcode
                c. The ordered list of logs in the transaction are expressed as [log0, log1, ..., logN].
                """
                depth = int(op[3:])
                mstart, msz = stk.pop(), stk.pop()
                topics = [stk.pop() for x in range(depth)]
                compustate.gas -= msz * opcodes.GLOGBYTE
                if msg.static:
                    return vm_exception('Cannot LOG inside a static context')
                if not mem_extend(mem, compustate, op, mstart, msz):
                    return vm_exception('OOG EXTENDING MEMORY')
                data = bytearray_to_bytestr(mem[mstart:mstart + msz])
                ext.log(msg.to, topics, data)
                log_log.trace('LOG',
                              to=msg.to,
                              topics=topics,
                              data=list(map(utils.safe_ord, data)))
                # print('LOG', msg.to, topics, list(map(ord, data)))

            elif op == 'CREATE':
                value, mstart, msz = stk.pop(), stk.pop(), stk.pop()
                if not mem_extend(mem, compustate, op, mstart, msz):
                    return vm_exception('OOG EXTENDING MEMORY')
                if msg.static:
                    return vm_exception(
                        'Cannot CREATE inside a static context')
                if ext.get_balance(msg.to) >= value and msg.depth < MAX_DEPTH:
                    cd = CallData(mem, mstart, msz)
                    ingas = compustate.gas
                    if ext.post_anti_dos_hardfork():
                        ingas = all_but_1n(ingas,
                                           opcodes.CALL_CHILD_LIMIT_DENOM)
                    create_msg = Message(msg.to, b'', value, ingas, cd,
                                         msg.depth + 1)
                    o, gas, addr = ext.create(create_msg)
                    if o:
                        stk.append(utils.coerce_to_int(addr))
                    else:
                        stk.append(0)
                    compustate.gas = compustate.gas - ingas + gas
                else:
                    stk.append(0)
            elif op in ('CALL', 'CALLCODE', 'DELEGATECALL', 'STATICCALL'):
                # Pull arguments from the stack
                if op in ('CALL', 'CALLCODE'):
                    gas, to, value, meminstart, meminsz, memoutstart, memoutsz = \
                        stk.pop(), stk.pop(), stk.pop(), stk.pop(), stk.pop(), stk.pop(), stk.pop()
                else:
                    gas, to, meminstart, meminsz, memoutstart, memoutsz = \
                        stk.pop(), stk.pop(), stk.pop(), stk.pop(), stk.pop(), stk.pop()
                    value = 0
                # Static context prohibition
                if msg.static and value > 0:
                    return vm_exception(
                        'Cannot make a non-zero-value call inside a static context'
                    )
                # Expand memory
                if not mem_extend(mem, compustate, op, meminstart, meminsz) or \
                        not mem_extend(mem, compustate, op, memoutstart, memoutsz):
                    return vm_exception('OOG EXTENDING MEMORY')
                to = utils.int_to_addr(to)
                # Extra gas costs based on hard fork-dependent factors
                extra_gas = (not ext.account_exists(to)) * (op == 'CALL') * (value > 0 or not ext.post_clearing_hardfork()) * opcodes.GCALLNEWACCOUNT + \
                    (value > 0) * opcodes.GCALLVALUETRANSFER + \
                    ext.post_anti_dos_hardfork() * opcodes.CALL_SUPPLEMENTAL_GAS
                # Compute child gas limit
                if ext.post_anti_dos_hardfork():
                    if compustate.gas < extra_gas:
                        return vm_exception('OUT OF GAS', needed=extra_gas)
                    gas = min(
                        gas,
                        all_but_1n(compustate.gas - extra_gas,
                                   opcodes.CALL_CHILD_LIMIT_DENOM))
                else:
                    if compustate.gas < gas + extra_gas:
                        return vm_exception('OUT OF GAS',
                                            needed=gas + extra_gas)
                submsg_gas = gas + opcodes.GSTIPEND * (value > 0)
                # Verify that there is sufficient balance and depth
                if ext.get_balance(msg.to) < value or msg.depth >= MAX_DEPTH:
                    compustate.gas -= (gas + extra_gas - submsg_gas)
                    stk.append(0)
                else:
                    # Subtract gas from parent
                    compustate.gas -= (gas + extra_gas)
                    assert compustate.gas >= 0
                    cd = CallData(mem, meminstart, meminsz)
                    # Generate the message
                    if op == 'CALL':
                        call_msg = Message(msg.to,
                                           to,
                                           value,
                                           submsg_gas,
                                           cd,
                                           msg.depth + 1,
                                           code_address=to,
                                           static=msg.static)
                    elif ext.post_homestead_hardfork(
                    ) and op == 'DELEGATECALL':
                        call_msg = Message(msg.sender,
                                           msg.to,
                                           msg.value,
                                           submsg_gas,
                                           cd,
                                           msg.depth + 1,
                                           code_address=to,
                                           transfers_value=False,
                                           static=msg.static)
                    elif op == 'DELEGATECALL':
                        return vm_exception('OPCODE INACTIVE')
                    elif op == 'CALLCODE':
                        call_msg = Message(msg.to,
                                           msg.to,
                                           value,
                                           submsg_gas,
                                           cd,
                                           msg.depth + 1,
                                           code_address=to,
                                           static=msg.static)
                    elif op == 'STATICCALL':
                        call_msg = Message(msg.to,
                                           to,
                                           value,
                                           submsg_gas,
                                           cd,
                                           msg.depth + 1,
                                           code_address=to,
                                           static=True)
                    else:
                        raise Exception("Lolwut")
                    # Get result
                    result, gas, data = ext.msg(call_msg)
                    if result == 0:
                        stk.append(0)
                    else:
                        stk.append(1)
                    # Set output memory
                    for i in range(min(len(data), memoutsz)):
                        mem[memoutstart + i] = data[i]
                    compustate.gas += gas
                    compustate.last_returned = bytearray(data)
            elif op == 'RETURN':
                s0, s1 = stk.pop(), stk.pop()
                if not mem_extend(mem, compustate, op, s0, s1):
                    return vm_exception('OOG EXTENDING MEMORY')
                return peaceful_exit('RETURN', compustate.gas, mem[s0:s0 + s1])
            elif op == 'REVERT':
                if not ext.post_metropolis_hardfork():
                    return vm_exception('Opcode not yet enabled')
                s0, s1 = stk.pop(), stk.pop()
                if not mem_extend(mem, compustate, op, s0, s1):
                    return vm_exception('OOG EXTENDING MEMORY')
                return revert(compustate.gas, mem[s0:s0 + s1])
            elif op == 'SUICIDE':
                if msg.static:
                    return vm_exception(
                        'Cannot SUICIDE inside a static context')
                to = utils.encode_int(stk.pop())
                to = ((b'\x00' * (32 - len(to))) + to)[12:]
                xfer = ext.get_balance(msg.to)
                if ext.post_anti_dos_hardfork():
                    extra_gas = opcodes.SUICIDE_SUPPLEMENTAL_GAS + \
                        (not ext.account_exists(
                            to)) * (xfer > 0 or not ext.post_clearing_hardfork()) * opcodes.GCALLNEWACCOUNT
                    if not eat_gas(compustate, extra_gas):
                        return vm_exception("OUT OF GAS")
                ext.set_balance(to, ext.get_balance(to) + xfer)
                ext.set_balance(msg.to, 0)
                ext.add_suicide(msg.to)
                log_msg.debug('SUICIDING',
                              addr=utils.checksum_encode(msg.to),
                              to=utils.checksum_encode(to),
                              xferring=xfer)
                return 1, compustate.gas, []

            # assert utils.is_numeric(compustate.gas)
            # this is slow!
            # for a in stk:
            #     assert is_numeric(a), (op, stk)
            #     assert a >= 0 and a < 2**256, (a, op, stk)
        # if not jumped:
        #    assert compustate.pc == nextpos
        #    compustate.pc = nextpos
    if compustate.pc >= codelen:
        return peaceful_exit('CODE OUT OF RANGE', compustate.gas, [])
    return vm_exception('INVALID JUMP')
Exemplo n.º 5
0
from biblecoin.tools import tester as t
from biblecoin import utils, abi
from biblecoin.hybrid_casper.casper_initiating_transactions import \
    viper_rlp_decoder_address, sig_hasher_address, purity_checker_address, casper_abi, purity_checker_abi
from biblecoin.hybrid_casper.casper_utils import mk_prepare, mk_commit, mk_logout, induct_validator
from biblecoin.hybrid_casper import casper_utils
from viper import compiler
# from biblecoin.slogging import configure_logging, set_level
# config_string = ':info,bible.vm.log:trace,bible.vm.op:trace,bible.vm.stack:trace,bible.vm.exit:trace,bible.pb.msg:trace,bible.pb.tx:debug'
# configure_logging(config_string=config_string)
alloc = {}
for i in range(9):
    alloc[utils.int_to_addr(i)] = {'balance': 1}
alloc[t.a0] = {'balance': 10**22}
alloc[t.a1] = {'balance': 10**22}
genesis = casper_utils.make_casper_genesis(alloc, 5, 100, 0.02, 0.002)
c = t.Chain(genesis=genesis)
t.languages['viper'] = compiler.Compiler()
t.gas_limit = 9999999
t.STARTGAS = 2000000
c.mine(1)

EPOCH_LENGTH = c.chain.config['EPOCH_LENGTH']

ct = abi.ContractTranslator(purity_checker_abi)
# Check that the RLP decoding library and the sig hashing library are "pure"
assert utils.big_endian_to_int(
    c.tx(t.k0, purity_checker_address, 0,
         ct.encode('submit', [viper_rlp_decoder_address]))) == 1
assert utils.big_endian_to_int(
    c.tx(t.k0, purity_checker_address, 0,
Exemplo n.º 6
0
def get_finalizer_code():
    global _finalizer_code
    if not _finalizer_code:
        import serpent
        _finalizer_code = get_contract_code(
            serpent.compile(open(finalizer_path).read()))
    return _finalizer_code


# The Casper-specific config declaration
casper_config = copy.deepcopy(default_config)
casper_config['HOMESTEAD_FORK_BLKNUM'] = 0
casper_config['METROPOLIS_FORK_BLKNUM'] = 0
casper_config['SERENITY_FORK_BLKNUM'] = 0
# config['CASPER_ADDR'] == config['SERENITY_HEADER_VERIFIER']
casper_config['CASPER_ADDR'] = utils.int_to_addr(255)
casper_config['RLP_DECODER_ADDR'] = utils.int_to_addr(253)
casper_config['HASH_WITHOUT_BLOOM_ADDR'] = utils.int_to_addr(252)
casper_config['MAX_UNCLE_DEPTH'] = 0
casper_config['PREV_HEADER_DEPTH'] = 1
casper_config['CONSENSUS_STRATEGY'] = 'casper'

_casper_ct = None


def get_casper_ct():
    import serpent
    global _casper_ct
    if not _casper_ct:
        _casper_ct = abi.ContractTranslator(
            serpent.mk_full_signature(open(casper_path).read()))
Exemplo n.º 7
0
    DAO_FORK_BLKHASH=decode_hex(
        '4985f5ca3d2afbec36529aa96f74de3cc10a2a4a6c44f2157a57d2c6059a11bb'),
    DAO_FORK_BLKEXTRA=decode_hex('64616f2d686172642d666f726b'),
    CHILD_DAO_LIST=list(map(utils.normalize_address, child_dao_list)),
    DAO_WITHDRAWER=utils.normalize_address(
        '0xbf4ed7b27f1d666546e30d74d50d173d20bca754'),
    # Anti-DoS fork
    ANTI_DOS_FORK_BLKNUM=2463000,
    SPURIOUS_DRAGON_FORK_BLKNUM=2675000,
    CONTRACT_CODE_SIZE_LIMIT=0x6000,
    # Default consensus strategy: ethash, poa, casper, pbft
    CONSENSUS_STRATEGY='ethash',
    # Serenity fork
    SERENITY_FORK_BLKNUM=2**99,
    PREV_HEADER_DEPTH=256,
    SYSTEM_ENTRY_POINT=utils.int_to_addr(2**160 - 2),
    SERENITY_HEADER_VERIFIER=utils.int_to_addr(255),
    SERENITY_HEADER_POST_FINALIZER=utils.int_to_addr(254),
    SERENITY_GETTER_CODE=decode_hex(
        '60ff331436604014161560155760203560003555005b6000355460205260206020f3'
    ),
    # Custom specials
    CUSTOM_SPECIALS={},
)
assert default_config['NEPHEW_REWARD'] == \
    default_config['BLOCK_REWARD'] // 32


class Env(object):
    def __init__(self, db=None, config=None, global_config=None):
        self.db = EphemDB() if db is None else db
Exemplo n.º 8
0
accounts = []
keys = []

for account_number in range(10):
    keys.append(sha3(to_string(account_number)))
    accounts.append(privtoaddr(keys[-1]))

k0, k1, k2, k3, k4, k5, k6, k7, k8, k9 = keys[:10]
a0, a1, a2, a3, a4, a5, a6, a7, a8, a9 = accounts[:10]

base_alloc = {}
minimal_alloc = {}
for a in accounts:
    base_alloc[a] = {'balance': 10**24}
for i in range(1, 9):
    base_alloc[int_to_addr(i)] = {'balance': 1}
    minimal_alloc[int_to_addr(i)] = {'balance': 1}
minimal_alloc[accounts[0]] = {'balance': 10**18}

# Initialize languages
languages = {}

try:
    import serpent
    languages['serpent'] = serpent
except ImportError:
    pass

from biblecoin.tools._solidity import get_solidity
_solidity = get_solidity()
if _solidity: