def navigate_to_rip(self):
if self.debug_view is not None:
if not self.state.connected:
rip = self.state.bv.entry_point
else:
rip = self.state.ip
# select instruction currently at
frame = ViewFrame.viewFrameForWidget(self.debug_view)
frame.navigate(self.state.bv, rip, True, True)
def exportDoubleClicked(self, cur):
sym = self.model.getSymbol(cur)
if sym is not None:
viewFrame = ViewFrame.viewFrameForWidget(self)
if len(self.data.get_functions_at(sym.address)) > 0:
viewFrame.navigate("Graph:" + viewFrame.getCurrentDataType(),
sym.address)
else:
viewFrame.navigate("Linear:" + viewFrame.getCurrentDataType(),
sym.address)
def navigateToFileOffset(self, offset):
if self.byteView is None:
addr = self.data.get_address_for_data_offset(offset)
view_frame = ViewFrame.viewFrameForWidget(self)
if view_frame is None:
return
if addr is None:
view_frame.navigate("Hex:Raw", offset)
else:
view_frame.navigate("Linear:" + view_frame.getCurrentDataType(), addr)
else:
if self.data == self.data.file.raw:
addr = offset
else:
addr = self.data.get_address_for_data_offset(offset)
if addr is None:
view_frame = ViewFrame.viewFrameForWidget(self)
if view_frame is not None:
view_frame.navigate("Hex:Raw", offset)
else:
self.byteView.navigate(addr)
self.byteView.setFocus(Qt.OtherFocusReason)
def list_dyn(self):
self.opened = {}
dock = DockHandler.getActiveDockHandler()
view_frame = dock.getViewFrame()
if view_frame:
frames = view_frame.parent()
for i in range(frames.count()):
widget = frames.widget(i)
vf = ViewFrame.viewFrameForWidget(widget)
if vf:
file_name = vf.getFileContext().getFilename
self.add(file_name)
return self.opened
def __init__(self, parent, binaryView):
QScrollArea.__init__(self, parent)
View.__init__(self)
View.setBinaryDataNavigable(self, True)
self.setupView(self)
# BinaryViewType
self.binaryView = binaryView
self.rootSelectionStart = 0
self.rootSelectionEnd = 1
self.ioRoot = None
self.ioCurrent = None
# top half = treeWidget + structPath
self.treeWidget = MyQTreeWidget()
self.treeWidget.setColumnCount(4)
self.treeWidget.setHeaderLabels(['label', 'value', 'start', 'end'])
self.treeWidget.itemSelectionChanged.connect(self.onTreeSelect)
self.structPath = QLineEdit("root")
self.structPath.setReadOnly(True)
topHalf = QWidget(self)
layout = QVBoxLayout()
layout.addWidget(self.treeWidget)
layout.addWidget(self.structPath)
topHalf.setLayout(layout)
# bottom half = hexWidget
self.hexWidget = HexEditor(binaryView,
ViewFrame.viewFrameForWidget(self), 0)
# splitter = top half, bottom half
self.splitter = QSplitter(self)
self.splitter.setOrientation(Qt.Vertical)
self.splitter.addWidget(topHalf)
self.splitter.addWidget(self.hexWidget)
self.setWidgetResizable(True)
self.setWidget(self.splitter)
self.kaitaiParse()
def __init__(self, parent, name, data):
if not type(data) == binaryninja.binaryview.BinaryView:
raise Exception('expected widget data to be a BinaryView')
self.bv = data
memory_view = binjaplug.get_state(data).memory_view
QWidget.__init__(self, parent)
DockContextHandler.__init__(self, self, name)
self.editor = LinearView(memory_view, ViewFrame.viewFrameForWidget(self))
self.actionHandler = UIActionHandler()
self.actionHandler.setupActionHandler(self)
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
layout.setSpacing(0)
layout.addWidget(self.editor)
self.setLayout(layout)
def __init__(self, parent, binaryView):
QScrollArea.__init__(self, parent)
View.__init__(self)
View.setBinaryDataNavigable(self, True)
self.setupView(self)
# input and output, Y = ROT13(X)
X = binaryView.read(0, len(binaryView))
Y = codecs.encode(X.decode('utf-8'), 'rot_13').encode('utf-8')
# store original binary view (X) and our translated binary view (Y)
self.binaryViewX = binaryView
self.binaryViewY = binaryview.BinaryView.new(Y)
self.setWidgetResizable(True)
self.hexWidget = HexEditor(self.binaryViewY,
ViewFrame.viewFrameForWidget(self), 0)
self.setWidget(self.hexWidget)
# capture writes to translated binary view
notification = Rot13Notification(self.binaryViewX)
self.binaryViewY.register_notification(notification)
def onTreeSelect(self, wtf=None):
# get KaitaiTreeWidgetItem
items = self.treeWidget.selectedItems()
if not items or len(items) < 1:
return
item = items[0]
# build path, inform user
structPath = item.label
itemTmp = item
while itemTmp.parent():
itemTmp = itemTmp.parent()
label = itemTmp.label
if label.startswith('_m_'):
label = label[3:]
structPath = label + '.' + structPath
self.structPath.setText('root.' + structPath)
#
(start, end) = (item.start, item.end)
if start == None or end == None:
return
# determine current IO we're in (the Kaitai input/output abstraction)
_io = None
# if the tree item is linked to a KaitaiNode, simply read the IO
if item.ksobj:
_io = item.ksobj._parent._io
else:
# else we're a leaf
parent = item.parent()
if parent:
# a leaf with a parent -> read parent's IO
_io = parent.ksobj._io
else:
# a leaf without a parent -> we must be at root -> use root IO
_io = self.ioRoot
# if the selection is in the root view, store the interval so that upon
# getCurrentOffset() callback, we return the middle and feature map is
# updated
if _io == self.ioRoot:
self.rootSelectionStart = start
self.rootSelectionEnd = end
# current kaitai object is on a different io? then swap HexEditor
if _io != self.ioCurrent:
# delete old view
self.hexWidget.hide()
self.hexWidget.setParent(None)
self.hexWidget.deleteLater()
self.hexWidget = None
# if it's the original file IO, wrap the already-open file binary view
if _io == self.ioRoot:
self.hexWidget = HexEditor(self.binaryView,
ViewFrame.viewFrameForWidget(self),
0)
# otherwise delete old view, create a temporary view
else:
# create new view
length = _io.size()
_io.seek(0)
data = _io.read_bytes(length)
bv = binaryview.BinaryView.new(data)
self.hexWidget = HexEditor(bv,
ViewFrame.viewFrameForWidget(self),
0)
self.splitter.addWidget(self.hexWidget)
self.ioCurrent = _io
# now position selection in whatever HexEditor is current
#log.log_debug('selecting to [0x%X, 0x%X)' % (start, end))
self.hexWidget.setSelectionRange(start, end)
def __init__(self, parent, data):
if not type(data) == BinaryView:
raise Exception('expected widget data to be a BinaryView')
self.bv = data
self.debug_state = binjaplug.get_state(data)
memory_view = self.debug_state.memory_view
self.debug_state.ui.debug_view = self
QWidget.__init__(self, parent)
self.controls = ControlsWidget.DebugControlsWidget(self, "Controls", data, self.debug_state)
View.__init__(self)
self.setupView(self)
self.current_offset = 0
self.splitter = QSplitter(Qt.Orientation.Horizontal, self)
frame = ViewFrame.viewFrameForWidget(self)
self.memory_editor = LinearView(memory_view, frame)
self.binary_editor = DisassemblyContainer(frame, data, frame)
self.binary_text = TokenizedTextView(self, memory_view)
self.is_raw_disassembly = False
self.raw_address = 0
self.is_navigating_history = False
self.memory_history_addr = 0
# TODO: Handle these and change views accordingly
# Currently they are just disabled as the DisassemblyContainer gets confused
# about where to go and just shows a bad view
self.binary_editor.getDisassembly().actionHandler().bindAction("View in Hex Editor", UIAction())
self.binary_editor.getDisassembly().actionHandler().bindAction("View in Linear Disassembly", UIAction())
self.binary_editor.getDisassembly().actionHandler().bindAction("View in Types View", UIAction())
self.memory_editor.actionHandler().bindAction("View in Hex Editor", UIAction())
self.memory_editor.actionHandler().bindAction("View in Disassembly Graph", UIAction())
self.memory_editor.actionHandler().bindAction("View in Types View", UIAction())
small_font = QApplication.font()
small_font.setPointSize(11)
bv_layout = QVBoxLayout()
bv_layout.setSpacing(0)
bv_layout.setContentsMargins(0, 0, 0, 0)
bv_label = QLabel("Loaded File")
bv_label.setFont(small_font)
bv_layout.addWidget(bv_label)
bv_layout.addWidget(self.binary_editor)
self.bv_widget = QWidget()
self.bv_widget.setLayout(bv_layout)
disasm_layout = QVBoxLayout()
disasm_layout.setSpacing(0)
disasm_layout.setContentsMargins(0, 0, 0, 0)
disasm_label = QLabel("Raw Disassembly at PC")
disasm_label.setFont(small_font)
disasm_layout.addWidget(disasm_label)
disasm_layout.addWidget(self.binary_text)
self.disasm_widget = QWidget()
self.disasm_widget.setLayout(disasm_layout)
memory_layout = QVBoxLayout()
memory_layout.setSpacing(0)
memory_layout.setContentsMargins(0, 0, 0, 0)
memory_label = QLabel("Debugged Process")
memory_label.setFont(small_font)
memory_layout.addWidget(memory_label)
memory_layout.addWidget(self.memory_editor)
self.memory_widget = QWidget()
self.memory_widget.setLayout(memory_layout)
self.splitter.addWidget(self.bv_widget)
self.splitter.addWidget(self.memory_widget)
# Equally sized
self.splitter.setSizes([0x7fffffff, 0x7fffffff])
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
layout.setSpacing(0)
layout.addWidget(self.controls)
layout.addWidget(self.splitter, 100)
self.setLayout(layout)
self.needs_update = True
self.update_timer = QTimer(self)
self.update_timer.setInterval(200)
self.update_timer.setSingleShot(False)
self.update_timer.timeout.connect(lambda: self.updateTimerEvent())
self.add_scripting_ref()
def clickEvent(self):
viewFrame = ViewFrame.viewFrameForWidget(self)
viewFrame.navigate("Graph:" + viewFrame.getCurrentDataType(),
self.address)
def importDoubleClicked(self, cur):
sym = self.model.getSymbol(cur)
if sym is not None:
viewFrame = ViewFrame.viewFrameForWidget(self)
viewFrame.navigate("Linear:" + viewFrame.getCurrentDataType(),
sym.address)
def __init__(self, parent, data):
if not type(data) == binaryninja.binaryview.BinaryView:
raise Exception('expected widget data to be a BinaryView')
self.bv = data
self.debug_state = binjaplug.get_state(data)
memory_view = self.debug_state.memory_view
self.debug_state.ui.debug_view = self
QWidget.__init__(self, parent)
View.__init__(self)
self.setupView(self)
self.current_offset = 0
self.splitter = QSplitter(Qt.Orientation.Horizontal, self)
frame = ViewFrame.viewFrameForWidget(self)
self.memory_editor = LinearView(memory_view, frame)
self.binary_editor = DisassemblyContainer(frame, data, frame)
self.binary_text = TokenizedTextView(self, memory_view)
self.is_raw_disassembly = False
# TODO: Handle these and change views accordingly
# Currently they are just disabled as the DisassemblyContainer gets confused
# about where to go and just shows a bad view
self.binary_editor.getDisassembly().actionHandler().bindAction(
"View in Hex Editor", UIAction())
self.binary_editor.getDisassembly().actionHandler().bindAction(
"View in Linear Disassembly", UIAction())
self.binary_editor.getDisassembly().actionHandler().bindAction(
"View in Types View", UIAction())
self.memory_editor.actionHandler().bindAction("View in Hex Editor",
UIAction())
self.memory_editor.actionHandler().bindAction(
"View in Disassembly Graph", UIAction())
self.memory_editor.actionHandler().bindAction("View in Types View",
UIAction())
small_font = QApplication.font()
small_font.setPointSize(11)
bv_layout = QVBoxLayout()
bv_layout.setSpacing(0)
bv_layout.setContentsMargins(0, 0, 0, 0)
bv_label = QLabel("Loaded File")
bv_label.setFont(small_font)
bv_layout.addWidget(bv_label)
bv_layout.addWidget(self.binary_editor)
self.bv_widget = QWidget()
self.bv_widget.setLayout(bv_layout)
disasm_layout = QVBoxLayout()
disasm_layout.setSpacing(0)
disasm_layout.setContentsMargins(0, 0, 0, 0)
disasm_label = QLabel("Raw Disassembly at PC")
disasm_label.setFont(small_font)
disasm_layout.addWidget(disasm_label)
disasm_layout.addWidget(self.binary_text)
self.disasm_widget = QWidget()
self.disasm_widget.setLayout(disasm_layout)
memory_layout = QVBoxLayout()
memory_layout.setSpacing(0)
memory_layout.setContentsMargins(0, 0, 0, 0)
memory_label = QLabel("Debugged Process")
memory_label.setFont(small_font)
memory_layout.addWidget(memory_label)
memory_layout.addWidget(self.memory_editor)
self.memory_widget = QWidget()
self.memory_widget.setLayout(memory_layout)
self.splitter.addWidget(self.bv_widget)
self.splitter.addWidget(self.memory_widget)
# Equally sized
self.splitter.setSizes([0x7fffffff, 0x7fffffff])
self.controls = ControlsWidget.DebugControlsWidget(
self, "Controls", data, self.debug_state)
layout = QVBoxLayout()
layout.setContentsMargins(0, 0, 0, 0)
layout.setSpacing(0)
layout.addWidget(self.controls)
layout.addWidget(self.splitter, 100)
self.setLayout(layout)
self.needs_update = True
self.update_timer = QTimer(self)
self.update_timer.setInterval(200)
self.update_timer.setSingleShot(False)
self.update_timer.timeout.connect(lambda: self.updateTimerEvent())
# Add debugger state to the interpreter as `dbg`
main_window = parent.window()
dock_handler = main_window.findChild(DockHandler, '__DockHandler')
if dock_handler:
console = dock_handler.getDockWidget('Python Console')
if console:
# Hack: Currently no way to access the scripting provider directly
# So just run the commands through the ui
console.widget().addInput(
"import debugger\ndbg = debugger.get(bv)")