def start(self):
self.exception = None
self.index = 0
event.connect(self.movable, "position", self.position_changed)
MotorMaster.start(self)
if self.exception:
raise self.exception[0], self.exception[1], self.exception[2]
def start(self):
self.exception = None
self.index = 0
event.connect(self.movable, "position", self.position_changed)
MotorMaster.start(self)
if self.exception:
raise self.exception[0], self.exception[1], self.exception[2]
def initialize_axis(self, axis):
def set_pos(move_done, axis=axis):
if move_done:
self.set_position(axis, axis.dial()*axis.steps_per_unit)
self._axis_moves[axis] = {
"measured_simul": False,
"measured_noise": 0.0,
"end_t": 0,
"end_pos": 0,
"move_done_cb": set_pos }
event.connect(axis, "move_done", set_pos)
# this is to test axis are initialized only once
axis.settings.set('init_count', axis.settings.get('init_count') + 1)
# Add new axis oject methods as tango commands.
add_axis_method(axis, self.custom_get_twice, types_info=("int", "int"))
add_axis_method(axis, self.custom_get_chapi, types_info=("str", "str"))
add_axis_method(axis, self.custom_send_command, types_info=("str", "None"))
add_axis_method(axis, self.custom_command_no_types, types_info=("None", "None"))
add_axis_method(axis, self.custom_set_measured_noise, types_info=("float", "None"))
add_axis_method(axis, self._set_closed_loop, name = "Set_Closed_Loop", types_info = (bool, None))
add_axis_method(axis, self.put_discrepancy, types_info=("int", "None"))
if axis.encoder:
self.__encoders.setdefault(axis.encoder, {})["axis"] = axis
def prepare(self, scan_info, devices_tree):
parent_node = self._node
prev_level = 1
self._nodes = dict()
for dev in list(devices_tree.expand_tree(mode=Tree.WIDTH))[1:]:
dev_node = devices_tree.get_node(dev)
level = devices_tree.depth(dev_node)
if prev_level != level:
prev_level = level
parent_node = self._nodes[dev_node.bpointer]
if isinstance(dev, (AcquisitionDevice, AcquisitionMaster)):
data_container_node = _create_node(dev.name,
parent=parent_node)
self._nodes[dev] = data_container_node
for channel in dev.channels:
self._nodes[channel] = channel.data_node(
data_container_node)
connect(channel, 'new_data', self._channel_event)
for signal in ('start', 'end'):
connect(dev, signal, self._device_event)
if self._writer:
self._writer.prepare(self, scan_info, devices_tree)
def init(self):
HardwareObject.init(self)
self.controller = self.getObjectByRole("controller")
event.connect(self.controller.tf, "state", self._tf_state_updated)
event.connect(self.controller.tf2, "state", self._tf_state_updated)
self.tfCfgByName = {}
self.coefByName = {}
self.sizeByName = {}
self.posNames = []
cfg = self["lenses_config"]
if not isinstance(cfg, list):
cfg = [cfg]
for lens_cfg in cfg:
name = lens_cfg.getProperty("name")
tf1 = lens_cfg.getProperty("tf1").split()
tf2 = lens_cfg.getProperty("tf2").split()
size = lens_cfg.getProperty("size")
coef = lens_cfg.getProperty("coef")
self.posNames.append(lens_cfg.getProperty("name"))
self.tfCfgByName[name] = {
"tf1": ["IN" if x else "OUT" for x in map(int, tf1)],
"tf2": ["IN" if x else "OUT" for x in map(int, tf2)],
}
self.sizeByName[name] = float(size)
self.coefByName[name] = float(coef)
def init(self):
HardwareObject.init(self)
self.controller = self.getObjectByRole("controller")
event.connect(self.controller.tf, "state", self._tf_state_updated)
event.connect(self.controller.tf2, "state", self._tf_state_updated)
self.tfCfgByName = {}
self.coefByName = {}
self.sizeByName = {}
self.posNames = []
cfg = self["lenses_config"]
if not isinstance(cfg, list):
cfg = [cfg]
for lens_cfg in cfg:
name = lens_cfg.getProperty("name")
tf1 = lens_cfg.getProperty("tf1").split()
tf2 = lens_cfg.getProperty("tf2").split()
size = lens_cfg.getProperty("size")
coef = lens_cfg.getProperty("coef")
self.posNames.append(lens_cfg.getProperty("name"))
self.tfCfgByName[name] = {
"tf1": ["IN" if x else "OUT" for x in map(int, tf1)],
"tf2": ["IN" if x else "OUT" for x in map(int, tf2)],
}
self.sizeByName[name] = float(size)
self.coefByName[name] = float(coef)
def initialize_axis(self, axis):
# this is to protect position reading,
# indeed the mockup controller uses redis to store
# a 'hardware position', and it is not allowed
# to read a position before it has been written
def set_pos(move_done, axis=axis):
if move_done:
self.set_position(axis, axis.dial()*axis.steps_per_unit)
self._axis_moves[axis] = {
"end_t": None,
"move_done_cb": set_pos }
if axis.settings.get('hw_position') is None:
axis.settings.set('hw_position', 0)
self._axis_moves[axis]['start_pos'] = self.read_position(axis)
self._axis_moves[axis]['target'] = self._axis_moves[axis]['start_pos']
event.connect(axis, "move_done", set_pos)
self.__voltages[axis] = axis.config.get("default_voltage",
int, default=220)
self.__cust_attr_float[axis] = axis.config.get("default_cust_attr",
float, default=3.14)
# this is to test axis are initialized only once
axis.settings.set('init_count', axis.settings.get('init_count') + 1)
if axis.encoder:
self.__encoders.setdefault(axis.encoder, {})["axis"] = axis
def trigger(self):
self.initial_velocity = self.movable.velocity()
self.movable.velocity(self.velocity)
end = self._calculate_undershoot(self.end_pos, end=True)
event.connect(self.movable, "move_done", self.move_done)
self.movable.move(end)
if self.backnforth:
self.start_pos, self.end_pos = self.end_pos, self.start_pos
def __init__(self, master, slave, parent):
self._master = master
self._parent = parent
for signal in ('start', 'end'):
connect(slave, signal, self)
for channel in slave.channels:
connect(channel, 'new_data', self)
def trigger(self):
self.initial_velocity = self.movable.velocity()
self.movable.velocity(self.velocity)
end = self._calculate_undershoot(self.end_pos, end=True)
event.connect(self.movable, "move_done", self.move_done)
self.movable.move(end)
if self.backnforth:
self.start_pos, self.end_pos = self.end_pos, self.start_pos
def __init__(self, device, parent):
self._device = device
self._parent = parent
for signal in ('start', 'end'):
connect(device, signal, self)
for channel in device.channels:
connect(channel, 'new_data', self)
def initialize_axis(self, axis):
axis.driver = axis.config.get("driver", str)
axis.channel = axis.config.get("channel", int)
axis.accumulator = None
event.connect(axis, "move_done", self._axis_move_done)
# self._write_no_reply(axis, "JOF") #, raw=True)
self._write_no_reply(axis, "MON %s" % axis.driver)
def initialize_axis(self, axis):
axis.driver = axis.config.get("driver", str)
axis.channel = axis.config.get("channel", int)
axis.accumulator = None
event.connect(axis, "move_done", self._axis_move_done)
# self._write_no_reply(axis, "JOF") #, raw=True)
self._write_no_reply(axis, "MON %s" % axis.driver)
def create_object_from_cache(config, name, controller):
try:
o = controller.get_axis(name)
except KeyError:
o = controller.get_encoder(name)
else:
event.connect(o, "write_setting", config_write_setting)
return o
def create_objects_from_config_node(config, node):
set_backend("beacon")
name = node.get('name')
controller_config = node.parent
controller_class_name = controller_config.get('class')
controller_name = controller_config.get('name')
if controller_name is None:
controller_name = "%s_%d" % (
controller_class_name, id(controller_config))
controller_class = get_controller_class(controller_class_name)
axes = list()
axes_names = list()
encoders = list()
encoder_names = list()
for axis_config in controller_config.get('axes'):
axis_name = axis_config.get("name")
CONTROLLER_BY_AXIS[axis_name] = controller_name
if axis_name.startswith("$"):
axis_class = AxisRef
axis_name = axis_name.lstrip('$')
else:
axis_class_name = axis_config.get("class")
if axis_class_name is None:
axis_class = Axis
else:
axis_class = get_axis_class(axis_class_name)
if axis_name != name:
axes_names.append(axis_name)
axes.append((axis_name, axis_class, axis_config))
for encoder_config in controller_config.get('encoders', []):
encoder_name = encoder_config.get("name")
CONTROLLER_BY_ENCODER[encoder_name] = controller_name
encoder_class_name = encoder_config.get("class")
if encoder_class_name is None:
encoder_class = Encoder
else:
encoder_class = get_encoder_class(encoder_class_name)
if encoder_name != name:
encoder_names.append(encoder_name)
encoders.append((encoder_name, encoder_class, encoder_config))
controller = controller_class(controller_name, controller_config, axes, encoders)
controller._update_refs()
controller.initialize()
try:
o = controller.get_axis(name)
except KeyError:
o = controller.get_encoder(name)
else:
event.connect(o, "write_setting", config_write_setting)
all_names = axes_names + encoder_names
cache_dict = dict(zip(all_names, [controller]*len(all_names)))
return {name: o}, cache_dict
def initialize_axis(self, axis):
"""
- Reads specific config
- Adds specific methods
- Switches piezo to ONLINE mode so that axis motion can be caused
by move commands.
Args:
- <axis>
Returns:
- None
"""
axis.channel = axis.config.get("channel", int)
axis.chan_letter = axis.config.get("chan_letter")
add_axis_method(axis, self.get_id, types_info=(None, str))
'''Closed loop'''
add_axis_method(axis, self.open_loop, types_info=(None, None))
add_axis_method(axis, self.close_loop, types_info=(None, None))
'''DCO'''
add_axis_method(axis, self.activate_dco, types_info=(None, None))
add_axis_method(axis, self.desactivate_dco, types_info=(None, None))
'''GATE'''
# to enable automatic gating (ex: zap)
add_axis_method(axis, self.enable_auto_gate, types_info=(bool, None))
# to trig gate from external device (ex: HPZ with setpoint controller)
add_axis_method(axis, self.set_gate, types_info=(bool, None))
if axis.channel == 1:
self.ctrl_axis = axis
# NO automatic gating by default.
self.auto_gate_enabled = False
'''end of move event'''
event.connect(axis, "move_done", self.move_done_event_received)
# Enables the closed-loop.
# self.sock.write("SVO 1 1\n")
self.send_no_ans(axis, "ONL %d 1" % axis.channel)
# VCO for velocity control mode ?
# self.send_no_ans(axis, "VCO %d 1" % axis.channel)
# Updates cached value of closed loop status.
self.closed_loop = self._get_closed_loop_status(axis)
# Reads high/low limits of the piezo to use in set_gate
self.low_limit = self._get_low_limit(axis)
self.high_limit = self._get_high_limit(axis)
def __init__(self, *args):
BlissWidget.__init__(self, *args)
self.defineSignal("newScan", ())
self.scanObject = None
self.xdata = []
self.ylable = ""
self.mylog = 0
self.canAddPoint = True
self.dm = DataManager()
event.connect(self.dm, "scan_new", self.newScan)
event.connect(self.dm, "scan_data", self.newScanPoint)
self.addProperty("backgroundColor", "combo", ("white", "default"),
"white")
self.addProperty("graphColor", "combo", ("white", "default"), "white")
self.lblTitle = QLabel(self)
self.graphPanel = QFrame(self)
buttonBox = QHBox(self)
self.lblPosition = QLabel(buttonBox)
self.graph = QtBlissGraph(self.graphPanel)
QObject.connect(self.graph, PYSIGNAL("QtBlissGraphSignal"),
self.handleBlissGraphSignal)
QObject.disconnect(
self.graph,
SIGNAL("plotMousePressed(const QMouseEvent&)"),
self.graph.onMousePressed,
)
QObject.disconnect(
self.graph,
SIGNAL("plotMouseReleased(const QMouseEvent&)"),
self.graph.onMouseReleased,
)
self.graph.canvas().setMouseTracking(True)
self.graph.enableLegend(False)
self.graph.enableZoom(False)
self.graph.setAutoLegend(False)
self.lblPosition.setAlignment(Qt.AlignRight)
self.lblTitle.setAlignment(Qt.AlignHCenter)
self.lblTitle.setSizePolicy(QSizePolicy.Expanding, QSizePolicy.Fixed)
self.lblPosition.setSizePolicy(QSizePolicy.Expanding,
QSizePolicy.Fixed)
buttonBox.setSizePolicy(QSizePolicy.Expanding, QSizePolicy.Fixed)
QVBoxLayout(self.graphPanel)
self.graphPanel.layout().addWidget(self.graph)
QVBoxLayout(self)
self.layout().addWidget(self.lblTitle)
self.layout().addWidget(buttonBox)
self.layout().addWidget(self.graphPanel)
def __init__(self, *args):
BlissWidget.__init__(self, *args)
self.defineSignal("newScan", ())
self.scanObject = None
self.xdata = []
self.ylable = ""
self.mylog = 0
self.canAddPoint = True
self.dm = DataManager()
event.connect(self.dm, "scan_new", self.newScan)
event.connect(self.dm, "scan_data", self.newScanPoint)
self.addProperty("backgroundColor", "combo", ("white", "default"), "white")
self.addProperty("graphColor", "combo", ("white", "default"), "white")
self.lblTitle = QLabel(self)
self.graphPanel = QFrame(self)
buttonBox = QHBox(self)
self.lblPosition = QLabel(buttonBox)
self.graph = QtBlissGraph(self.graphPanel)
QObject.connect(
self.graph, PYSIGNAL("QtBlissGraphSignal"), self.handleBlissGraphSignal
)
QObject.disconnect(
self.graph,
SIGNAL("plotMousePressed(const QMouseEvent&)"),
self.graph.onMousePressed,
)
QObject.disconnect(
self.graph,
SIGNAL("plotMouseReleased(const QMouseEvent&)"),
self.graph.onMouseReleased,
)
self.graph.canvas().setMouseTracking(True)
self.graph.enableLegend(False)
self.graph.enableZoom(False)
self.graph.setAutoLegend(False)
self.lblPosition.setAlignment(Qt.AlignRight)
self.lblTitle.setAlignment(Qt.AlignHCenter)
self.lblTitle.setSizePolicy(QSizePolicy.Expanding, QSizePolicy.Fixed)
self.lblPosition.setSizePolicy(QSizePolicy.Expanding, QSizePolicy.Fixed)
buttonBox.setSizePolicy(QSizePolicy.Expanding, QSizePolicy.Fixed)
QVBoxLayout(self.graphPanel)
self.graphPanel.layout().addWidget(self.graph)
QVBoxLayout(self)
self.layout().addWidget(self.lblTitle)
self.layout().addWidget(buttonBox)
self.layout().addWidget(self.graphPanel)
def get_axis(axis_name):
"""Get axis from loaded configuration or from Beacon
If needed, instanciates the controller of the axis and initializes it.
Args:
axis_name (str):
Axis name
Returns:
:class:`bliss.common.axis.Axis` object
Raises:
RuntimeError
"""
if BACKEND=='beacon':
global BEACON_CONFIG
if BEACON_CONFIG is None:
BEACON_CONFIG = beacon_get_config()
o = BEACON_CONFIG.get(axis_name)
if not isinstance(o, Axis):
raise AttributeError("'%s` is not an axis" % axis_name)
return o
try:
controller_name = CONTROLLER_BY_AXIS[axis_name]
except KeyError:
raise RuntimeError("no axis '%s` in config" % axis_name)
else:
try:
controller = CONTROLLERS[controller_name]
except KeyError:
raise RuntimeError(
"no controller can be found for axis '%s`" %
axis_name)
try:
controller_instance = controller["object"]
except KeyError:
raise RuntimeError(
"could not get controller instance for axis '%s`" %
axis_name)
if not controller["initialized"]:
controller_instance._update_refs()
controller_instance.initialize()
controller["initialized"] = True
axis = controller_instance.get_axis(axis_name)
event.connect(axis, "write_setting", write_setting)
return axis
def initialize(self):
for real_axis in self._tagged['real']:
# check if real axis is really from another controller
if real_axis.controller == self:
raise RuntimeError("Real axis '%s` doesn't exist" %
real_axis.name)
self.reals.append(real_axis)
real_axis.controller._initialize_axis(real_axis)
self.pseudos = [
axis for axis_name, axis in self.axes.iteritems()
if axis not in self.reals
]
self._reals_group = Group(*self.reals)
event.connect(self._reals_group, 'move_done', self._real_move_done)
calc = False
for pseudo_axis in self.pseudos:
self._Controller__initialized_hw_axis[pseudo_axis].value = True
self._initialize_axis(pseudo_axis)
event.connect(pseudo_axis, 'sync_hard', self._pseudo_sync_hard)
if self.read_position(pseudo_axis) is None:
# the pseudo axis position has *never* been calculated
calc = True
for real_axis in self.reals:
event.connect(real_axis, 'internal_position', self._calc_from_real)
event.connect(real_axis, 'internal__set_position',
self._real_setpos_update)
if calc:
self._calc_from_real()
def initialize(self):
for real_axis in self._tagged['real']:
# check if real axis is really from another controller
if real_axis.controller == self:
raise RuntimeError(
"Real axis '%s` doesn't exist" % real_axis.name)
self.reals.append(real_axis)
real_axis.controller._initialize_axis(real_axis)
self.pseudos = [axis for axis_name, axis in self.axes.iteritems()
if axis not in self.reals]
self._reals_group = Group(*self.reals)
event.connect(self._reals_group, 'move_done', self._real_move_done)
calc = False
for pseudo_axis in self.pseudos:
self._Controller__initialized_hw_axis[pseudo_axis].value = True
self._initialize_axis(pseudo_axis)
event.connect(pseudo_axis, 'sync_hard', self._pseudo_sync_hard)
if self.read_position(pseudo_axis) is None:
# the pseudo axis position has *never* been calculated
calc = True
for real_axis in self.reals:
event.connect(real_axis, 'internal_position', self._calc_from_real)
event.connect(real_axis, 'internal__set_position', self._real_setpos_update)
if calc:
self._calc_from_real()
def test_move_done_event(self):
res = {"ok": False}
def callback(move_done, res=res):
if move_done:
res["ok"] = True
roby = bliss.get_axis("roby")
roby_pos = roby.position()
robz = bliss.get_axis("robz")
robz_pos = robz.position()
event.connect(self.grp, "move_done", callback)
self.grp.rmove({robz: 2, roby: 3})
self.assertEquals(res["ok"], True)
self.assertEquals(robz.position(), robz_pos+2)
self.assertEquals(roby.position(), roby_pos+3)
def GroupMove(self, axes_pos):
"""
Absolute move multiple motors
"""
axes_dict = self._get_axis_devices()
axes_names = axes_pos[::2]
if not set(axes_names).issubset(set(axes_dict)):
raise ValueError("unknown axis(es) in motion")
axes = [axes_dict[name].axis for name in axes_names]
group = Group(*axes)
event.connect(group, 'move_done', self.group_move_done)
positions = map(float, axes_pos[1::2])
axes_pos_dict = dict(zip(axes, positions))
group.move(axes_pos_dict, wait=False)
groupid = ','.join(map(':'.join, grouped(axes_pos, 2)))
self.group_dict[groupid] = group
return groupid
def GroupMove(self, axes_pos):
"""
Absolute move multiple motors
"""
axes_dict = self._get_axis_devices()
axes_names = axes_pos[::2]
if not set(axes_names).issubset(set(axes_dict)):
raise ValueError("unknown axis(es) in motion")
axes = [axes_dict[name].axis for name in axes_names]
group = Group(*axes)
event.connect(group, 'move_done', self.group_move_done)
positions = map(float, axes_pos[1::2])
axes_pos_dict = dict(zip(axes, positions))
group.move(axes_pos_dict, wait=False)
groupid = ','.join(map(':'.join, grouped(axes_pos, 2)))
self.group_dict[groupid] = group
return groupid
def test_move_done(roby, robz):
grp = Group(robz, roby)
res = {"ok": False}
def callback(move_done, res=res):
if move_done:
res["ok"] = True
roby_pos = roby.position()
robz_pos = robz.position()
event.connect(grp, "move_done", callback)
grp.rmove({robz: 2, roby: 3})
assert res["ok"] == True
assert robz.position() == robz_pos + 2
assert roby.position() == roby_pos + 3
def test_scan_callbacks(beacon):
session = beacon.get("test_session")
session.setup()
res = {"new": False, "end": False, "values": []}
def on_scan_new(scan_info):
res["new"] = True
def on_scan_data(scan_info, values):
res["values"].append(values[counter.name])
def on_scan_end(scan_info):
res["end"] = True
event.connect(scan, 'scan_new', on_scan_new)
event.connect(scan, 'scan_data', on_scan_data)
event.connect(scan, 'scan_end', on_scan_end)
counter_class = getattr(setup_globals, 'TestScanGaussianCounter')
counter = counter_class("gaussian", 10, cnt_time=0.1)
s = scans.timescan(0.1, counter, npoints=10, return_scan=True, save=False)
assert res["new"]
assert res["end"]
assert numpy.array_equal(numpy.array(res["values"]), counter.data)
def test_scan_callbacks(beacon):
session = beacon.get("test_session")
session.setup()
res = {"new": False, "end": False, "values": []}
def on_scan_new(scan_info):
res["new"] = True
def on_scan_data(scan_info, values):
res["values"].append(values[counter.name])
def on_scan_end(scan_info):
res["end"] = True
event.connect(scan, 'scan_new', on_scan_new)
event.connect(scan, 'scan_data', on_scan_data)
event.connect(scan, 'scan_end', on_scan_end)
counter_class = getattr(setup_globals, 'TestScanGaussianCounter')
counter = counter_class("gaussian", 10, cnt_time=0.1)
s = scans.timescan(0.1, counter, npoints=10, return_scan=True, save=False)
assert res["new"]
assert res["end"]
assert numpy.array_equal(numpy.array(res["values"]), counter.data)
def initialize_axis(self, axis):
"""
- Reads specific config
- Adds specific methods
- Switches piezo to ONLINE mode so that axis motion can be caused
by move commands.
Args:
- <axis>
Returns:
- None
"""
axis.channel = axis.config.get("channel", int)
axis.chan_letter = axis.config.get("chan_letter")
if axis.channel == 1:
self.ctrl_axis = axis
# NO automatic gating by default.
self.auto_gate_enabled = False
'''end of move event'''
event.connect(axis, "move_done", self.move_done_event_received)
# Enables the closed-loop.
# self.sock.write("SVO 1 1\n")
self.send_no_ans(axis, "ONL %d 1" % axis.channel)
# VCO for velocity control mode ?
# self.send_no_ans(axis, "VCO %d 1" % axis.channel)
# Updates cached value of closed loop status.
self.closed_loop = self._get_closed_loop_status(axis)
# Reads high/low limits of the piezo to use in set_gate
self.low_limit = self._get_low_limit(axis)
self.high_limit = self._get_high_limit(axis)
def initialize_axis(self, axis):
"""
- Reads specific config
- Adds specific methods
- Switches piezo to ONLINE mode so that axis motion can be caused
by move commands.
Args:
- <axis>
Returns:
- None
"""
axis.channel = axis.config.get("channel", int)
axis.chan_letter = axis.config.get("chan_letter")
if axis.channel == 1:
self.ctrl_axis = axis
# NO automatic gating by default.
self.auto_gate_enabled = False
'''end of move event'''
event.connect(axis, "move_done", self.move_done_event_received)
# Enables the closed-loop.
# self.sock.write("SVO 1 1\n")
self.send_no_ans(axis, "ONL %d 1" % axis.channel)
# VCO for velocity control mode ?
# self.send_no_ans(axis, "VCO %d 1" % axis.channel)
# Updates cached value of closed loop status.
self.closed_loop = self._get_closed_loop_status(axis)
# Reads high/low limits of the piezo to use in set_gate
self.low_limit = self._get_low_limit(axis)
self.high_limit = self._get_high_limit(axis)
def _update_refs(self):
Controller._update_refs(self)
self.reals = []
for real_axis in self._tagged['real']:
# check if real axis is really from another controller
if real_axis.controller == self:
raise RuntimeError(
"Real axis '%s` doesn't exist" % real_axis.name)
self.reals.append(real_axis)
event.connect(real_axis, 'position', self._calc_from_real)
event.connect(real_axis, 'state', self._update_state_from_real)
self._reals_group = Group(*self.reals)
event.connect(self._reals_group, 'move_done', self._real_move_done)
self.pseudos = [
axis for axis_name,
axis in self.axes.iteritems() if axis not in self.reals]
def initialize_axis(self, axis):
CalcController.initialize_axis(self, axis)
event.connect(axis, "s_param", self._calc_from_real)
def initialize_axis(self, axis):
CalcController.initialize_axis(self, axis)
event.connect(axis, "dspace", self._calc_from_real)
def initialize_axis(self, axis):
CalcController.initialize_axis(self, axis)
axis.no_offset = self.no_offset
event.connect(axis, "dspace", self._calc_from_real)
